Linear Actuators. Linear actuators for industrial, mobile, medical, office and domestic applications.

Transcription

1 Linear Actuators Linear actuators for industrial, mobile, medical, office and domestic applications.

2 Thomson the Choice for Optimized Motion Solutions Often the ideal design solution is t about finding the fastest, sturdiest, most accurate or even the least expensive option. Rather, the ideal solution is the optimal balance of performance, life and cost. The Best Positioned Supplier of Mechanical Motion Techlogy Thomson has several advantages that makes us the supplier of choice for motion control techlogy. Thomson own the broadest standard product offering of mechanical motion techlogies in the industry. Modified versions of standard product or white sheet design solutions are routine for us. Choose Thomson and gain access to over 70 years of global application experience in industries including packaging, factory automation, material handling, medical, clean energy, printing, automotive, machine tool, aerospace and defense. As part of Fortive Corporation, we are financially strong and unique in our ability to bring together control, drive, motor, power transmission and precision linear motion techlogies. A Name You Can Trust A wealth of product and application information as well as 3D models, software tools, our distributor locator and global contact information is available at. For assistance in Europe, contact us at or us at sales.uk@ thomsonlinear.com. Talk to us early in the design process to see how Thomson can help identify the optimal balance of performance, life and cost for your next application. And, call us or any of our distribution partners around the world for fast delivery of replacement parts. The Fortive Business System The Fortive Business System (FBS) was established to increase the value we bring to customers. It is a mature and successful set of tools we use daily to continually improve manufacturing operations and product development processes. FBS is based on the principles of Kaizen which continuously and aggressively eliminate waste in every aspect of our business. FBS focuses the entire organization on achieving breakthrough results that create competitive advantages in quality, delivery and performance advantages that are passed on to you. Through these advantages Thomson is able to provide you faster times to market as well as unsurpassed product selection, service, reliability and productivity. Local Support Around the Globe Application Centers Global Manufacturing Operations Global Design & Engineering Centers

3 Linear Actuators Introduction Table of Contents Introduction... 3 Company Introduction... 4 Product Introduction... 5 The Benefits of Electrification Actuator Applications... 8 Selection Procedure... 9 Performance Overview Standard Rod Actuators Lifting Columns Rodless Actuators Non-driven and Rotary Actuators Legacy Actuators Rod Actuators Elektrak Electrak 1SP Electrak Electrak PPA-DC Electrak Electrak LA Electrak Electrak LA Electrak Throttle Max Jac Lifting Columns LC LC LC DMD DMA Actuator Controls DPDT Switch AC AC-247 ELS Control DCG Control Accessories Accessories and Spare Parts Mounting Components Electrical Components Ordering Keys Electrak DC-actuators Electrak AC-actuators Electrac Throttle and Max Jac Lifting Columns Rodless Actuators and DCG Actuator Controls Non-driven Actuators Glossary A - C D - G H - Life Lift - O P - Sp St - W Rodless Actuators LM80-H LM80-V LM80-I Non-driven Actuators Electrak PPA-M Electrak FA Electrical Wiring Diagrams DC-actuators AC-actuators Electrak Throttle

4 Linear Motion. Optimized. Introduction Company Introduction The history of the Thomson Electrak actuator goes back to the development of ball screw actuators 40 years ago in Marengo, IL, USA. The first generation of general purpose actuators were developed for control of accessory drives on garden tractors and farm equipment. Since that simple beginning, actuators are w used in all types of equipment to automate a process, remove people from dangerous situations, provide remote control or make difficult, tedious manual jobs easier. The linear actuators in this catalog represent proven design concepts found in the entire Electrak series. From light load 050s to the high performance Electrak 10 series capable of handling loads up to 6800 N, Thomson offers features unavailable anywhere else. The world s most versatile actuator selection Thomson combined the clevis to clevis mount Electrak series, and the trunnion mount Electrak PPA units, to provide the most versatile selection of linear actuators available. Our actuator team has solved over tough application challenges with even tougher actuators. We built our reputation in the mobile off highway market in extremely demanding operating conditions. And if you can t find the actuator to meet your application, call us for a cost effective actuator built to your needs. Thomson builds more custom actuators than anyone. You can count on Thomson Thomson linear actuators rugged, reliable remote linear motion control with the push of a button. You can count on Thomson for worldwide sales, service, application support and local availability. Please visit for more information The first generation of actuators for use in garden tractors and farm equipment is released. First line of ball screw driven actuators with right angle AC and DC motors is released. First line of actuators with parallel motors and both acme and ball screw drive is released. The Tiger line actuators are released for OEMs. Electrak 1, 2, 5, 10 and 100 are released for distribution. Electrak 205 and the first line of MCS controls are released. Electrak 1SP with feedback potentiometer is released. The first lifting columns, DMD and DMA, are released. 4

5 Linear Actuators Introduction Product Introduction Thomson actuators are easy to mount and operate, require maintenance, don t leak hydraulic fluid, are easy to incorporate into an automated process and once installed they will work reliably under the toughest conditions year after year. Actuators offer advantages over mechanical and hydraulic systems in many applications. They are self-contained, rugged, and durable, making them ideal anywhere you want to lift, lower, push, pull, rotate or position a load. Compact design With their compact size, actuators can be located in confined areas. An actuator with a 100 mm stroke length can produce 6800 N of force from a 290 mm package. Electrak 1 and 050 series actuators fit small areas with package lengths as short as 115 mm. Rugged and reliable All Thomson actuators incorporate strong, high quality components to assure trouble-free service. Rugged spur, worm or helical gearing, aircraft quality lubricants and high performance motors provide the maximum life and value. The actuators are gasketed and sealed throughout for protection in wet, dirty and oily environments and are ideal for use on outdoor equipment. The rod style actuators have stainless steel or aluminum extension tubes to resist corrosion. Maintenance-free All adjustments and lubrication are made at the factory and maintenance is required or recommended. Consistent, repeatable performance is provided for the entire lifetime of the actuator. Bidirectional Thomson actuators can push and pull loads ranging from one to 680 kg, and can extend up to 900 mm. With the Thomson series of actuator controls, you can create an actuator control system to meet your particular motion control requirements. Safe operation Motors used on Electrak actuators utilize thermal switches in their windings or Electronic Load Monitoring to shut the actuator off in case of overheating. A standard overload clutch or Electronic Load Monitoring will stop the motion if the load is too great or at the end of a stroke. All linear actuators will hold their loads with power removed. Versatile Stroke lengths of 25 to 1500 mms are available and speeds are as high as 110 mm per second. Actuators are easy to apply, quick to install and usually only requiring two wires for operation. A wide variety of options and controls makes it easy to find the perfect actuator for your application. And if you have special needs, cost effective custom solutions are our speciality A patent for a load lock device is granted. Electrak 1LL is released. Electrak 150 with two patents is released. AC control line is released. Electrak 050 with patented design and the first rotary actuators are released. The first LM80 rodless actuator is released. The DCG control line is released. Max Jac and Electrak Throttle are released. The lifting columns range LC Series is released. 5

6 Linear Motion. Optimized. Introduction The Benefits of Electrification Electrification is converting manual, hydraulic and pneumatic operations to electromechanical motion. Substantially improved machine performance and cost advantages can be gained through electrification. Reduce costs Electric actuation components cost less than comparable hydraulic and pneumatic systems. One electric linear actuator is faster and easier to install than the multiple hydraulic and pneumatic components required to achieve the same function. Electric actuators feature quick and predictable system tuning when compared to the headaches of configuring hydraulic systems and their components which contend with power variation, temperature variation, and nlinear performance profiles. Compare zero maintenance electric actuators against the fluid replacement, leak repairs and other routine maintenance needed to support hydraulic systems. Eliminate the environmental problems and costs associated with hydraulic fluid leaks and fluid disposal. Boost productivity and efficiency Improve control over critical machine operations with: - Multiple digital and analog feedback options - Fixed and programmable limit switches for teach and repeat positions - Low voltage switching options that can interface directly with programmable PC/PLC controllers - Pulse width modulation for variable speed control Superior accuracy and repeatability Link and automate simultaneous processes Reduce down time with: - Zero maintenance - Longer component life - Redundancy through manual override Improve safety and reduce costs by removing people from danger with convenient remote control Great opportunities for electric conversion Making jobs easier Raising and lowering a deck on a mower, paver or floor scrubber. Shifting manual transmission. Lifting wheelchairs into a vehicle. Opening and closing doors on buses or vans. Automating a process Moving twine across a round bale of hay for consistent wrap. Varying the chute opening on a salt/sand spreader based on speed for consistent application. Lift and lower pantographs on electrical trains and trams. Providing remote control Throttle control from the rear of garbage trucks. Positioning the discharge spout on a large chipper, swblower or combine. Opening a chute on a salt/sand spreader. Positioning of solar energy panels and wind power plant turbines. Opening/closing the engine hatch on boats. Positioning boat, handicap vehicle seats. Belt tensioning. Removing people from danger Sliding a cover over the stairs in a recreational vehicle. Throttle control for a tree stump grinder to keep the operator away from moving parts or flying debris. Medical waste/refuse compacting. Replacing hydraulics or pneumatics Power steering. Dump beds on ATVs. Positioning mower decks on golf course equipment. 6

7 Linear Actuators Introduction The Benefits of Electrification Replacing hydraulic or pneumatic cylinders with electrical linear actuators means a simpler and smaller installation, easier control, lower energy costs, higher accuracy, less maintenance, less ise and a cleaner, healthier environment Single acting, uni-directional hydraulic cylinder system 1. Hydraulic cylinder 2. Electric pump motor 3. Hydraulic pump 4. Hydraulic oil resevoir 5. Check valve 6. Operator push button box 7. Relay cabinet 8. Unloading valve 7 You can design, purchase and install all these components or you can select and install an actuator and control. 1 Plug and play type of connections, simple installation and need for any set up or adjustments ensures accurate, clean and trouble free operation within the hour. 8 2 This single acting, uni-directional hydraulic cylinder system is one of the simplest hydraulic solutions. This system only allows consistent performance in one direction. In order to get consistent performance in both directions a bidirectional system would be required which is even more complex and costly. Electric linear actuator system 1. Linear actuator 2. DPDT switch This simple electrical actuator system will ensure consistent operation in both directions. It will also give you added features such as electronic load monitoring, end of stroke limit switches, mid stroke protection and manual override operation in case of power failure. Optional features such as analog or digital position feedback, adjustable end of stroke limit switches, end of stroke indication outputs and signal following capability are also available. Ather advantage is that a system like this is easy to integrate with other control systems rmally found in industrial systems or vehicles such as PLC s, micro-controllers, computers or simple relay based systems. 7

8 Linear Motion. Optimized. Introduction Actuator Applications Thomson Electrak actuators can be found in the most diverse applications, ranging from agricultural to industrial, ventilation and medical equipment. Anywhere you want to lift, lower, push, pull, rotate or position a load - only your imagination will set the limit. Mobile-off-highway Actuators are widely used in agricultural, construction, mining, forestry, road work and railway equipment for the control of seats, hoods, doors, covers, balers, pantographs, sprayer booms, throttles and much more. Turf and garden Actuators can be found on riding lawn mowers, golf carts, garden tractors, cleaning machines, sky lifts and other utility vehicles. Industrial equipment Actuators are used on conveyor belts, for adjustable work tables/platforms and in the opening and closing of hatches, doors and locks. They are also common in machines for dispensing, cutting, packaging, labeling, scanning or printing. Health and fitness Actuators are commonly used in patient lifts/beds, handicap adapted vehicles and wheel chairs to position patients or equipment. Other applications include hospital devices, examination chairs/tables and work out/gym apparatus. Office, domestic and entertainment equipment At home, in the office and in the entertainment business actuators are used in automatic doors, lifts, garage doors, gates, satellite dishes, beds, reclining chairs, adjustable office desks, arcade games, vending machines, theatre/tv/ movie props and theme park attractions. Marine On boats, ships and oil rigs actuators are used in seats, hatches, fire doors, rescue equipment, valves and throttles. Ventilation and process control Actuators are used for valve control in ventilation and process equipment. 8

9 Linear Actuators Introduction Selection Procedure Thomson actuators have been divided into good, better and best groups to help you select the appropiate actuator for your application. By using the simple selection procedure described below and the Performance Overview on the next few pages, the process will be even easier. Good These actuators are the lowest cost solution, provide capable, reliable performance and have some flexibility of options and configurations. If you just need a basic actuator, this is the best choice. Selection procedure Step 1 - Determine Voltage DC actuators can be operated by battery, a rectifier or an actuator control with 230 Vac input. AC actuators are either 230 or 400 Vac. Step 2 - Determine Load/Speed Select the actuator which has the load and speed rating that suits your application. Better These actuators have more flexibility in options, configurations and modifications. They have passed the test of time in the toughest agriculture and construction applications. Choose from this group if you need a rugged, heavy duty actuator customized to your application. Best These robust and strong actuators are the market leaders with state of the art techlogy and flexibility. They are smaller, lighter and have a shorter retracted length than other actuators on the market. If you need electronic load monitoring, programmable limit switches, digital feedback or signal following, this is the group for you. Step 3 - Select Stroke Length Choose the desired stroke length from either the Performance Overview pages or the individual product pages. Step 4 - Verify Design Considerations Do you need a very short retracted length, adjustable, fixed or programmable limit switches, electronic load monitoring, digital or analog feedback, low voltage power switching, manual override, signal following, clevis mounting, tube mounting or trunnion mounting? If you need an actuator to take side loads or cantilever loads, select from the LC-Series, DMD, DMA or LM80 actuators. Step 5 - Select Control The controls in the catalog are designed for use with Electrak actuators and range from a simple switch to a control with membrane switches and feedback display or with a hand pendant. On-line selection software On you can select an actuator by using the actuator product advisor. This easy to use software lets you play with all the parameters and will give you all the relevant data and the correct ordering information for your choice. Can t find what you are looking for? If you are an OEM customer and can t find exactly what you need, contact customer service at +46 (0) for a custom solution. 9

10 Linear Motion. Optimized. Performance Overview Standard Rod Actuator Range ROD ACTUATORS E 1 E 1SP E 050 E PPA-DC E 10 E LA14 Product availability North America / Europe / Asia 1 / / / / / / / / / / / / General performance Product group rating good good better good better best Input voltage - Vdc / Vac [V] 12, 24, 36 2 / 12, 24, 36 2 / 12, 24, 36 / 12, 24, 36, 90 3 / 12, 24, 36 / 12, 24, 36 / Maximum dynamic load [N] Maximum speed [mm/s] Maximum stroke length [mm] Restraining torque [Nm] 2, Protection class IP65 IP65 IP56 IP52 IP65 IP65 Features Mounting configuration clevis clevis clevis trunnion clevis clevis/ trunnion Screw type - acme / worm / ball / / / / / / / / 2 / / / / Overload clutch Motor overload protection End of stroke limit switches Potentiometer feedback Dynamic braking 6 Optional features End of stroke limit switches 3 Potentiometer feedback Encoder feedback External adjustable magnetic sensors Manual override 3 More information See page Actuator Controls Recommended control AC-247 ELS AC-247 ELS DCG-150 AC-063 AC-063 AC Products t available in this region are t further described in this catalog. Contact customer support for more information. 2 Not available in North America. 3 Not available in Europe. 4 For horizontal operation only. 5 For vertical operation only. 6 At end of stroke only. 7 Trapezoidal screw. Can t find what you are looking for? Thomson is the industry leader in custom actuator design. If you do t find the right product for your application within our standard range, please contact customer service at Phone +46 (0) for a customized solution. 10

11 Linear Actuators Performance Overview Standard Rod Actuator Range ROD ACTUATORS E 5 E LA24 E THROTTLE MAX JAC Product availability North America / Europe / Asia 1 / / / / / / / / General performance Product group rating better best best best Input voltage - Vdc / Vac [V] / 115 3, 230, / 230, , 24 12, 24 Maximum dynamic load [N] Maximum speed [mm/s] Maximum stroke length [mm] Restraining torque [Nm] Protection class IP45 IP45 IP67/IP69K IP66/IP69K Features Mounting configuration clevis clevis/trunnion integrated clevis Screw type - acme / worm / ball 2 / / / / / / / / Overload clutch Motor overload protection End of stroke limit switches Potentiometer feedback Dynamic braking Optional features End of stroke limit switches 3 Potentiometer feedback Encoder feedback External adjustable magnetic sensors Manual override More information See page Actuator Controls Recommended control DPDT Switch DPDT Switch DPDT, CanBus upon request Can t find what you are looking for? Thomson is the industry leader in custom actuator design. If you do t find the right product for your application within our standard range, please contact customer service at Phone +46 (0) for a customized solution. 11

12 Linear Motion. Optimized. Performance Overview Lifting Columns LIFTING COLUMNS LC1600 LC2000 LC3000 DMD DMA Product availability North America / Europe / Asia 1 / / / / / / / / / / General performance Product group rating best best best better better Input voltage - Vdc / Vac [V] , 24, 36 / / 115 3, 230, Maximum dynamic load [N] Maximum speed [mm/s] Maximum stroke length [mm] Restraining torque [Nm] Protection class IP44 IP44 IP44 IP65 IP45 Features Mounting configuration base mount base mount base mount base mount base mount Screw type - acme / worm / ball / / telescopic / / / / / / Overload clutch Motor overload protection End of stroke limit switches Potentiometer feedback Dynamic braking Optional features End of stroke limit switches Potentiometer feedback 2 2 Encoder feedback External adjustable magnetic sensors Manual override More information See page Actuator Controls Recommended control DCG-154 DCG-180 DCG-180 AC-063 DPDT Switch 1 Products t available in this region are t further described in this catalog. Contact customer support for more information. 2 Not available in North America. 3 Not available in Europe. 4 For horizontal operation only. 5 For vertical operation only. 6 At end of stroke only. 7 Trapezoidal screw. Can t find what you are looking for? Thomson is the industry leader in custom actuator design. If you do t find the right product for your application within our standard range, please contact customer service at Phone +46 (0) for a customized solution. 12

13 Linear Actuators Performance Overview Rodless Actuators RODLESS ACTUATORS LM80-H LM80-V LM80-I Product availability North America / Europe / Asia 1 / / / / / / General performance Product group rating better better better Input voltage - Vdc / Vac [V] 12, 24 / 12, 24 / 12, 24 / Maximum dynamic load [N] Maximum speed [mm/s] Maximum stroke length [mm] Restraining torque [Nm] Protection class IP44 IP44 IP44 Features Mounting configuration T-slot T-slot T-slot Screw type - acme / worm / ball 7 / / 7 / / 7 / / Overload clutch Motor overload protection End of stroke limit switches Potentiometer feedback Dynamic braking Optional features End of stroke limit switches Potentiometer feedback Encoder feedback External adjustable magnetic sensors Manual override More information See page Actuator Controls Recommended control DCG-170 DCG-160 DCG-160 Can t find what you are looking for? Thomson is the industry leader in custom actuator design. If you do t find the right product for your application within our standard range, please contact customer service at Phone +46 (0) for a customized solution. 13

14 Linear Motion. Optimized. Performance Overview Non-driven and Rotary Actuators E PPA-M E FA14 ROTARY DGB Product availability North America / Europe / Asia 1 / / / / General performance Product group rating good best Product availability North America / Europe / Asia General performance Product group rating / / better Max. input torque [Nm] 9 1,8 Max. input speed [rpm] Maximum dynamic load [N] Maximum speed [mm/s] 8 37 Maximum stroke length [mm] Restraining torque [Nm] 23 0 Standard features Mounting configuration trunnion clevis/trunnion Screw type - acme / worm / ball / / / / Overload clutch Optional features Manual override Protective bellows External adjustable magnetic sensors More information See page Products t available in this region are t further described in this catalog. Contact customer support for more information. Input voltage - Vdc / Vac [V] 12, 24, 36 / Maximum torque [Nm] 20 Maximum speed [rpm] 200 Maximum duty cycle [%] 25 Protection class IP56 Standard features Mounting configuration clevis/tapped holes Overload clutch Motor overload protection Optional features Dual ouput shafts Manual override More information See page 1 1 Products t available in this region are t further described in this catalog. Contact customer support for more information. Can t find what you are looking for? Thomson is the industry leader in custom actuator design. If you do t find the right product for your application within our standard range, please contact customer service at Phone +46 (0) for a customized solution. 14

15 Linear Actuators Performance Overview Legacy Actuators LEGACY ACTUATORS E 1SL E 150 E100 E Pro Product availability North America / Europe / Asia / / / / / / / / General performance Input voltage - Vdc / Vac [V] 12, 24 / 12, 24, 36 / / 12, 24 / Maximum dynamic load [N] Maximum speed [mm/s] Maximum stroke length [mm] Restraining torque [Nm] / 0 2 Protection class IP65 IP56 IP65 IP66 (67) Standard features Mounting configuration clevis clevis tube clevis Screw type - acme / worm / ball / / / / / / / / Motor overload protection Potentiometer feedback Fixed end of stroke limit switches Adjustable end of stroke limit switches Internally restrained Electronic load monitoring Dynamic braking Manual override Optional features Adjustable end of stroke limit switches Potentiometer feedback Encoder feedback Programmable limit switches End of stroke indication outputs Low voltage power switching Signal follower input 1 Not available in Europe. 2 Without/with anti-rotation option. About Legacy Actuators The legacy products will t be further described in this catalog. We recommend you choose one of the products on the preceding pages, especially when designing new equipment. However, the legacy actuators can still be purchased and we fully support them. Please contact customer support if you need more information. About Custom Actuators The actuators you see on these pages are some of the building blocks we use to create cost effective custom actuators for OEMs. If you can t find the actuator that meets your needs, call customer service for a custom solution. Thomson is the industry leader in custom actuator design. 15

16 Linear Motion. Optimized. Electrak 1 12, 24 and 36 Vdc - load up to 340 N» Ordering Key - see page 74» Glossary - see page 85» Electric Wiring Diagram - see page 56 Performance Specifications Parameter Electrak 1 Standard Features and Benefits Very compact and lightweight Integrated end of stroke limit switches Corrosion resistant housing Self-locking acme screw drive system Maintenance free Ideal for replacement of comparable size pneumatic and hydraulic cylinders General Specifications Parameter Electrak 1 Screw type acme Maximum load, dynamic / static S -09A04 S -09A08 S -17A08 S -17A16 Speed, at load / at maximum load S -09A04 S -09A08 S -17A08 S -17A16 [N] [mm/s] 110 / / / / / / / / 7 Available input voltages [Vdc] 12, 24, 36 Standard stroke lengths [inch] 1, 2, 3, 4, 5, 6 Operating temperature limits [ C] Full load duty 25 C [%] 25 End play, maximum [mm] 0,9 Restraining torque [Nm] 2,3 Lead cross section [mm 2 ] 1 Lead length [mm] 110 Protection class IP65 Internally restrained Manual override Dynamic braking Holding brake End of stroke protection Mid stroke protection Motor protection Motor connection Motor connector Certificates Options, self-locking end of stroke limit switches auto reset thermal switch flying leads and connector Packard Electric Pack-Con male with terminal Mating connector: with terminal (p/n ) CE ne Compatible Controls Control model See page DPDT switch 61 AC-247 ELS 64 DCG

17 Linear Actuators Electrak 1 12, 24 and 36 Vdc - load up to 340 N S: stroke A: retracted length A1: installation must include at least this much coast beyond limit switch shut off A2: red lead A3: yellow lead Ordering stroke [inch] Electrical stroke (S) * [mm (inch)] 20,8 (0,82) 46,2 (1,82) 71,6 (2,82) 97,0 (3,82) 122,4 (4,82) 147,8 (5,82) Retracted length (A) [mm] 134,5 159,9 185,3 210,7 236,1 261,5 Weight [kg] 0,52 0,54 0,60 0,63 0,66 0,68 * The electrical stroke is the stroke when the internal limit switches switch off the power to the motor. The installation then must allow the extension tube to coast at least 0,7 mm beyond that position before it becomes mechanically blocked to travel any further (distance A1). If there is mechanical block the extension tube coasting distance will depend on the load, load means the longest coasting distance while the distance becomes shorter as the load becomes higher. The exact coasting distance depends on the load, in which direction the load acts (push or pull), the mounting orientation of the actuator and any added friction to the system by guides or other installations and has to be determined on a case to case basis. Performance Diagrams Speed and Current vs. Load Speed and Current vs. Load Speed and Current vs. Load 12 Vdc 24 Vdc 36 Vdc V: speed I: current F: load 1: speed S12-09A04 2: speed S12-09A08 3: speed S12-17A08 4: speed S12-17A16 5: current S12-09A04 6: current S12-09A08 7: current S12-17A08 8: current S12-17A16 V: speed I: current F: load 1: speed S24-09A04 2: speed S24-09A08 3: speed S24-17A08 4: speed S24-17A16 5: current S24-09A04 6: current S24-09A08 7: current S24-17A08 8: current S24-17A16 V: speed I: current F: load 1: speed S36-09A04 2: speed S36-09A08 3: speed S36-17A08 4: speed S36-17A16 5: current S36-09A04 6: current S36-09A08 7: current S36-17A08 8: current S36-17A16 17

18 Linear Motion. Optimized. Electrak 1SP 12, 24 and 36 Vdc - load up to 340 N» Ordering Key - see page 74» Glossary - see page 85» Electric Wiring Diagram - see page 56 Performance Specifications Parameter Electrak 1SP Standard Features and Benefits Very compact and lightweight Potentiometer feedback Corrosion resistant housing Self-locking acme screw drive system Maintenance free Internally restrained extension tube Ideal for replacement of comparable size pneumatic and hydraulic cylinders Maximum load, dynamic / static SP -09A04 SP -09A08 SP -17A08 SP -17A16 Speed, at load / at maximum load SP -09A04 SP -09A08 SP -17A08 SP -17A16 [N] [mm/s] 110 / / / / / / / / 7 Available input voltages [Vdc] 12, 24, 36 Standard stroke lengths [inch] 2, 4, 6* Operating temperature limits [ C] Full load duty 25 C [%] 25 End play, maximum [mm] 0,9 Restraining torque [Nm] 0 General Specifications Parameter Electrak 1SP Screw type acme Internally restrained yes Lead cross section [mm 2 ] 1 Lead length [mm] 110 Protection class IP65 Potentiometer [kohm] 10** * Six inch stroke lenght t possible for SP -17A16. ** See table on page 19 for resistance change per mm. Manual override Dynamic braking Compatible Controls Holding brake, self-locking Control model See page End of stroke protection Mid stroke protection Motor protection Motor connection Motor connector Certificates Options auto reset thermal switch flying leads and connector Packard Electric Pack-Con male with terminal Mating connector: with terminal (p/n ) CE ne DPDT switch 61 AC-247 ELS 64 DCG

19 Linear Actuators Electrak 1SP 12, 24 and 36 Vdc - load up to 340 N S: stroke A: retracted length A1: cable for potentiometer feedback, length = 635 mm A2: black lead for 12 Vdc units, white lead for 24 Vdc units, blue lead for 36 Vdc A3: yellow lead Ordering stroke [inch] 2 4 6* Actual stroke (S) [mm (inch)] 58,7 (2,31) 115,1 (4,53) 171,5 (6,75) Retracted length (A) [mm] 197,9 254,3 310,7 Weight [kg] 0,8 0,85 0,9 Potentiometer resistance change [ohm/mm] (63)** 31 * Six inch stroke lenght t possible for SP -17A16. ** SP -17A16 with 4 inch stroke = 63 ohm/mm, all other stroke lengths has 47 ohm/mm. Performance Diagrams Speed and Current vs. Load Speed and Current vs. Load Speed and Current vs. Load 12 Vdc 24 Vdc 36 Vdc V: speed I: current F: load 1: speed SP12-09A04 2: speed SP12-09A08 3: speed SP12-17A08 4: speed SP12-17A16 5: current SP12-09A04 6: current SP12-09A08 7: current SP12-17A08 8: current SP12-17A16 V: speed I: current F: load 1: speed SP24-09A04 2: speed SP24-09A08 3: speed SP24-17A08 4: speed SP24-17A16 5: current SP24-09A04 6: current SP24-09A08 7: current SP24-17A08 8: current SP24-17A16 V: speed I: current F: load 1: speed SP36-09A04 2: speed SP36-09A08 3: speed SP36-17A08 4: speed SP36-17A16 5: current SP36-09A04 6: current SP36-09A08 7: current SP36-17A08 8: current SP36-17A16 19

20 Linear Motion. Optimized. Electrak , 24 and 36 Vdc - load up to 510 N» Ordering Key - see page 75» Glossary - see page 85» Electric Wiring Diagram - see page 56 Performance Specifications Parameter Electrak 050 Maximum load, dynamic / static DE 17W41 DE 17W42 DE 17W44 [N] 510 / / / 280 Standard Features and Benefits Designed for office or medical applications Small, quiet and lightweight Very short retracted length Low cost Durable and corrosion free plastic housing Color molded into the plastic, painting required End of stroke limit switches with dynamic braking Maintenance free Internally restrained extension tube Estimated life is minimum cycles Q-version for ise sensitive applications General Specifications Parameter Electrak 050 Speed, at load / at maximum load DE - 17W41 DE - 17W42 DE - 17W44 DE Q17W41 DE Q17W42 DE Q17W44 Available input voltages DE - DE Q [mm/s] [Vdc] 12 / 9 24 / / 37 9 / 7,5 18 / / 30 12, 24, Standard stroke lengths [mm] 25, 50, 75, 100, 125, 150, 175, 200 Operating temperature limits [ C] Full load duty 20 C [%] 25 End play, maximum [mm] 1,5 Restraining torque [Nm] 0 Lead cross section [mm 2 ] 1 Screw type worm Lead length [mm] 500 Internally restrained Manual override Dynamic braking Holding brake End of stroke protection Mid stroke protection yes yes, at end of stroke, self-locking internal limit switches overload clutch Protection class DE - DE Q Potentiometer resistance change DE 17W41 DE 17W42 DE 17W44 [ohm/mm] IP66 IP51 22,0 21,9 21,2 Motor protection Motor connection Motor connector Certificates auto reset thermal switch flying leads CE Options potentiometer 10 kohm* cross holes rotated 90 white housing * See performance specification table for resistance change per mm of travel. Compatible Controls Control model See page DPDT switch 61 AC-247 ELS 64 DCG

21 Linear Actuators Electrak , 24 and 36 Vdc - load up to 510 N S: stroke (tolerances: 17W41 = ± 3,23 mm, 17W42 = ± 4,25 mm, 17W44 = ± 5,26 mm) A: retracted length A1: Ø 6 mm +0,15/ -0 mounting cross holes (2 ) in standard position A2: red lead A3: yellow lead A4: vent tube Ø 3 mm Stroke (S) [mm] Retracted length (A) [mm] 114,2 139,2 164,2 189,2 214,2 239,2 264,2 289,2 Retracted length, with potentiometer (A) [mm] 145,7 170,7 195,7 220,7 245,7 270,7 295,7 - * Weight [kg] 0,59 O,64 0,69 0,73 0,78 0,82 0,87 0,91 Weight with potentiometer [kg] 0,69 0,74 0,79 0,83 0,88 0,92 0,97 - * * 200 mm stroke t possible with potentiometer (PO, MP, PF options) Performance Diagrams 050, standard version 050, Q-version Speed and Current vs. Load Speed and Current vs. Load V: speed I: current F: load 1: speed DE 17W41 2: speed DE 17W42 3: speed DE 17W44 4: current 12 Vdc, DE12-17W41 5: current 24 Vdc, DE24 17W41 6: current 12 Vdc, DE12-17W42 7: current 24 Vdc, DE24 17W42 8: current 12 Vdc, DE12-17W44 9: current 24 Vdc, DE24 17W44 21

22 Linear Motion. Optimized. Electrak PPA-DC 12, 24 and 36 Vdc - load up to 6670 N» Ordering Key - see page 75» Glossary - see page 85» Electric Wiring Diagram - see page 57 Performance Specifications Parameter Maximum load, dynamic / static PPA -18B65 PPA -58B65 [N] PPA-DC 3330 / / Standard Features and Benefits Strong and versatile heavy duty actuator High duty cycle Highly efficient ball screw drive system Overload clutch for mid and end of stroke protection Stroke lengths up to 36 inch (914 mm) Three different input voltages to choose from Motor with thermal switch Maintenance free Large range of options Speed, at load / at maximum load PPA12(24/36)-18B65 PPA12(24/36)-58B65 [mm/s] 32 / / 9 Available input voltages [Vdc] 12, 24, 36 Standard stroke lengths [inch] 4, 8, 12, 18, 24, 36 Operating temperature limits [ C] Full load duty 25 C [%] 30 End play, maximum [mm] 1 Restraining torque PPA -18B65 PPA -58B65 [Nm] Lead cross section [mm 2 ] 2 Lead length [mm] 420 General Specifications Parameter Electrak PPA-DC Screw type ball Internally restrained Manual override, optional Dynamic braking Protection class IP52 Compatible Controls Control model See page DPDT switch 61 AC Holding brake End of stroke protection Mid stroke protection Motor protection Motor connection Motor connector Certificates Options yes overload clutch overload clutch auto reset thermal switch flying leads CE end of stroke limit switches potentiometer encoder protective bellows 22

23 Linear Actuators Electrak PPA-DC 12, 24 and 36 Vdc - load up to 6670 N S: stroke A: retracted length B: retracted length to trunnions A1: housing dimensions for limit switch, encoder or potentiometer options Stroke (S) [inch (mm)] 4 (101,6) 8 (203,2) 12 (304,8) 18 (457,2) 24 (609,6) 36 (914,4) Retracted length (A) without options [mm] 348,0 449,6 551,2 754,4 906,8 1211,6 Retracted length (A) with limit switch, [mm] encoder or potentiometer 398,8 500,4 602,0 805,2 957,6 1262,4 Retracted length to trunnions (B) [mm] 223,5 352,1 426,7 629,9 782,3 1087,1 Weight [kg] 4,5 5,3 6,0 7,2 8,4 10,8 Add on weight for limit switch, [kg] encoder or potentiometer 0,5 0,5 0,5 0,5 0,5 0,5 Performance Diagrams Speed and Current vs. Load V: speed I: current F: load 1: speed PPA -18B65 2: speed PPA -58B65 3: current 12 Vdc, PPA12-18B65 4: current 12 Vdc, PPA12-58B65 5: current 24 Vdc, PPA24-18B65 6: current 24 Vdc, PPA24-58B65 7: current 36 Vdc, PPA36-18B65 8: current 36 Vdc, PPA36-58B65 23

24 Linear Motion. Optimized. Electrak 10 12, 24 and 36 Vdc - load up to 6800 N» Ordering Key - see page 76» Glossary - see page 85» Electric Wiring Diagram - see page 57 Performance Specifications Parameter Electrak 10 Standard Features and Benefits Robust, strong and reliable Withstands very harsh environments Stainless steel extension tube Acme or ball screw models Overload clutch for mid and end of stroke protection Motor with thermal switch Maintenance free General Specifications Parameter Electrak 10 Screw type Internally restrained Manual override Dynamic braking Holding brake acme screw models ball screw models End of stroke protection acme or ball, optional, self-locking yes overload clutch Maximum load, dynamic / static D -05A5 (acme screw) D -10A5 (acme screw) D -20A5 (acme screw) D -05B5 (ball screw) D -10B5 (ball screw) D -20B5 (ball screw) D -21B5 (ball screw) Speed, at load / at maximum load D -05A5 (acme screw) D -10A5 (acme screw) D -20A5 (acme screw) D -05B5 (ball screw) D -10B5 (ball screw) D -20B5 (ball screw) D -21B5 (ball screw) [N] [mm/s] 1100 / / / / / / / / / / / / / / 11 Available input voltages [Vdc] 12, 24, 36 * Standard stroke lengths [inch] 4, 6, 8, 10, 12, 14, 16, 18, 20, 24 Operating temperature limits [ C] Full load duty 25 C [%] 25 End play, maximum [mm] 1,0 Restraining torque [Nm] 11,3 Lead cross section [mm 2 ] 2 Lead length [mm] 165 Protection class * Other input voltages available on request, contact customer support. IP65 Mid stroke protection Motor protection Motor connection Motor connector Certificates Options overload clutch auto reset thermal switch flying leads and connector AMP connector with housing p/n with male terminals p/n CE potentiometer manual override Compatible Controls Control model See page DPDT switch 61 AC

25 Linear Actuators Electrak 10 12, 24 and 36 Vdc - load up to 6800 N S: stroke, tolerance acme / ball screw A: retracted length, tolerance acme / ball screw A1: black lead A2: red lead A3: manual override input (optional) A4: housing dimensions for potentiometer option A5: potentiometer cable output, cable length = min. 500 mm B: 86,1 mm Stroke (S) [inch (mm)] 4 (101,6) 6 (152,4) 8 (203,2) 10 (254,0) 12 (304,8) 14 (355,6) 16 (406,4) 18 (457,2) 20 (508,0) 24 (609,6) Retracted length, acme screw models (A) [mm] 262,3 313,1 363,9 414,7 465,5 567,1 617,9 668,7 719,5 821,1 Retracted length, ball screw models (A) [mm] 302,3 353,1 403,9 454,7 505,5 607,1 657,9 708,7 759,5 861,1 Add on length for potentiometer* [mm] 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 Weight, acme screw models [kg] 4,5 4,7 4,9 5,0 5,2 5,4 5,5 5,7 5,8 6,2 Weight, ball screw models [kg] 5,1 5,3 5,5 5,6 5,8 5,9 6,1 6,3 6,4 6,8 Add on weight for potentiometer* [kg] 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 Potentiometer resistance change* [ohm/mm] * Potentiometer is optional Performance Diagrams Acme Screw Models Speed and Current vs. Load Ball Screw Models Speed and Current vs. Load V: speed I: current F: load 1: speed D -05A5 2: speed D -10A5 3: speed D -20A5 4. current 12 Vdc, D12-05A5 5: current 24 Vdc, D24-05A5 6: current 12 Vdc, D12-10A5 7: current 24 Vdc, D24-10A5 8: current 12 Vdc, D12-20A5 9: current 24 Vdc, D24-20A5 V: speed I: current F: load 1: speed D -05B5 2: speed D -10B5 3: speed D -20B5 4: speed D -21B5 5. current 12 Vdc, D12-05B5 6: current 24 Vdc, D24-05B5 7: current 12 Vdc, D12-10B5 8: current 24 Vdc, D24-10B5 9: current 12 Vdc, D12-20B5 10: current 24 Vdc, D24-20B5 11: current 12 Vdc, D12-21B5 12: current 24 Vdc, D24-21B5 25

26 Linear Motion. Optimized. Electrak LA14 12, 24 and 36 Vdc - load up to 6800 N» Ordering Key - see page 77» Glossary - see page 85» Electric Wiring Diagram - see page 56 Performance Specifications Parameter Electrak LA14 Standard Features and Benefits Rugged and robust Withstands very harsh environments Stainless steel extension tube Corrosion free aluminium cover tube Acme or ball screw drive Trunnion mounting possible Overload clutch for mid and end of stroke protection T-slot grooves in the cover tube for magnetic sensors Motor with thermal switch Maintenance free General Specifications Parameter Electrak LA14 Screw type Internally restrained Manual override Dynamic braking Holding brake acme screw models ball screw models End of stroke protection Mid stroke protection Motor protection Motor connection Motor connector acme or ball yes, optional, self-locking yes overload clutch overload clutch auto reset thermal switch flying leads and connector AMP connector with housing p/n with male terminals p/n Maximum load, dynamic / static DA -05A65M (acme screw) DA -10A65M (acme screw) DA -20A65M (acme screw) DA -05B65M (ball screw) DA -10B65M (ball screw) DA -20B65M (ball screw) DA -21B65M (ball screw) Speed, at load / at maximum load DA -05A65M (acme screw) DA -10A65M (acme screw) DA -20A65M (acme screw) DA -05B65M (ball screw) DA -10B65M (ball screw) DA -20B65M (ball screw) DA -21B65M (ball screw) [N] [mm/s] 1100 / / / / / / / / / / / / / / 11 Available input voltages [Vdc] 12, 24, 36 * Standard stroke lengths [mm] 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600 Operating temperature limits [ C] Full load duty 25 C [%] 25 End play, maximum [mm] 1,0 Restraining torque [Nm] 0 Lead cross section [mm 2 ] 2 Lead length [mm] 165 Protection class * Other input voltages available on request, contact customer support. Compatible Controls Control model IP65 See page DPDT switch 61 AC Certificates Options CE potentiometer manual override 26

27 Linear Actuators Electrak LA14 12, 24 and 36 Vdc - load up to 6800 N S: stroke, tolerance acme / ball screw A: retracted length, tolerance acme / ball screw A1: black lead A2: red lead A3: manual override input (optional) A4: housing dimensions for potentiometer option A5: potentiometer cable output, cable length = min. 500 mm B: 86,1 mm Stroke (S) [mm] Retracted length, acme screw models (A) [mm] 216,7 266,7 316,7 366,7 416,7 466,7 566,7 616,7 666,7 716,7 766,7 816,7 Retracted length, ball screw models (A) [mm] 269,6 319,6 369,6 419,6 469,6 519,6 619,6 669,6 719,6 769,6 819,6 869,6 Add on length for potentiometer* [mm] 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 Weight, acme screw models [kg] 4,5 4,7 4,9 5,1 5,3 5,5 5,8 6,0 6,2 6,4 6,6 6,8 Weight, ball screw models [kg] 5,3 5,5 5,7 5,9 6,1 6,3 6,6 6,8 7,0 7,2 7,4 7,6 Add on weight for potentiometer* [kg] 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 Potentiometer resistance change* [ohm/mm] * Potentiometer is optional Performance Diagrams Acme Screw Models Speed and Current vs. Load Ball Screw Models Speed and Current vs. Load V: speed I: current F: load 1: speed DA -05A65M 2: speed DA -10A65M 3: speed DA -20A65M 4. current 12 Vdc, DA12-05A65M 5: current 24 Vdc, DA24-05A65M 6: current 12 Vdc, DA12-10A65M 7: current 24 Vdc, DA24-10A65M 8: current 12 Vdc, DA12-20A65M 9: current 24 Vdc, DA24-20A65M V: speed I: current F: load 1: speed DA -05B65M 2: speed DA -10B65M 3: speed DA -20B65M 4: speed DA -21B65M 5. current 12 Vdc, DA12-05B65M 6: current 24 Vdc, DA24-05B65M 7: current 12 Vdc, DA12-10B65M 8: current 24 Vdc, DA24-10B65M 9: current 12 Vdc, DA12-20B65M 10: current 24 Vdc, DA24-20B65M 11: current 12 Vdc, DA12-21B65M 12: current 24 Vdc, DA24-21B65M 27

28 Linear Motion. Optimized. Electrak and 400 Vac - load up to 6800 N» Ordering Key - see page 78» Glossary - see page 85» Electric Wiring Diagram - see page 58 Performance Specifications Parameter Electrak 5 Standard Features and Benefits Robust, strong and reliable Stainless steel extension tube Acme or ball screw models Overload clutch for mid and end of stroke protection Heavy duty motor with thermal switch Anti-coast brake for repeatable positioning on all ball screw models. Optional on acme screw models. Maintenance free General Specifications Parameter Electrak 5 Screw type Internally restrained Manual override Dynamic braking Holding brake acme screw models ball screw models acme or ball, optional, self-locking yes Maximum load, dynamic / static A -05A5 (acme screw)* A -10A5 (acme screw) A -20A5 (acme screw) A -05B5 (ball screw) A -10B5 (ball screw) A -20B5 (ball screw) A -21B5 (ball screw) Speed, at load / at maximum load A -05A5 (acme screw)* A -10A5 (acme screw) A -20A5 (acme screw) A -05B5 (ball screw) A -10B5 (ball screw) A -20B5 (ball screw) A -21B5 (ball screw) Available input voltages Single phase Three phase Input frequency Vac model Vac model [N] [mm/s] [Vac] [Hz] 1100 / / / / / / / / / / / / / / ** /60 50 Standard stroke lengths [inch] 4, 6, 8, 10, 12, 14, 16, 18, 20, 24 Operating temperature limits [ C] Full load duty 25 C [%] 25 Maximum on time [s] 45 End play, maximum [mm] 1,0 End of stroke protection Mid stroke protection Motor protection overload clutch overload clutch auto reset thermal switch Restraining torque [Nm] 11,3 Lead cross section [mm 2 ] 1,5 Cable length [mm] 600 Motor connection cable Protection class IP45 Motor connector Certificates UL, CSA, CE * Not possible with 400 Vac input voltage. ** 10 µf capacitor required to run the actuator, p/n Options potentiometer manual override Compatible Controls Control model See page DPDT switch 61 28

29 Linear Actuators Electrak and 400 Vac - load up to 6800 N S: stroke, tolerance acme / ball screw A: retracted length, tolerance acme / ball screw A1: cable A2: manual override input (optional) A3: housing dimensions for potentiometer option A4: potentiometer cable output, cable length = min. 500 mm B: 86,1 mm Stroke (S) [inch (mm)] 4 (101,6) 6 (152,4) 8 (203,2) 10 (254,0) 12 (304,8) 14 (355,6) 16 (406,4) 18 (457,2) 20 (508,0) 24 (609,6) Retracted length, acme screw models (A) [mm] 262,3 313,1 363,9 414,7 465,5 567,1 617,9 668,7 719,5 821,1 Retracted length, ball screw models (A) [mm] 302,3 353,1 403,9 454,7 505,5 607,1 657,9 708,7 759,5 861,1 Add on length for potentiometer* [mm] 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 Weight, acme screw models [kg] 5,9 6,1 6,3 6,5 6,7 6,9 7,1 7,3 7,5 7,8 Weight, ball screw models [kg] 6,5 6,7 6,9 7,1 7,3 7,5 7,7 7,9 8,1 8,4 Add on weight for potentiometer* [kg] 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 Potentiometer resistance change* [ohm/mm] * Potentiometer is optional (NPO, BPO option) Performance Diagrams Acme Screw Models Speed and Current vs. Load Ball Screw Models Speed and Current vs. Load V: speed I: current F: load 1: speed A22-05A5 2: speed A -10A5 3: speed A -20A5 4. current 230 Vac, A22-05A5 5: current 230 Vac, A22-10A5 6: current 400 Vac, A42-10A5 7: current 230 Vac, A22-20A5 8: current 400 Vac, A42-20A5 V: speed I: current F: load 1: speed A22-05B5, A42-05B5 2: speed A22-10B5, A42-10B5 3: speed A22-20B5, A42-20B5 4: speed A22-21B5, A42-21B5 5. current 230 Vac, A22-05B5 6: current 400 Vac, A42-05B5 7: current 230 Vac, A22-10B5, A22-20B5 8: current 400 Vac, A42-10B5, A42-20B5 9: current 230 Vac, A22-21B5 10: current 400 Vac, A42-21B5 29

30 Linear Motion. Optimized. Electrak LA and 400 Vac - load up to 6800 N» Ordering Key - see page 79» Glossary - see page 85» Electric Wiring Diagram - see page 58 Performance Specifications Parameter Electrak LA24 30 Standard Features and Benefits Robust, strong and reliable Corrosion free aluminium cover tube Stainless steel extension tube Acme or ball screw models Rugged and robust Withstands very harsh environments Trunnion mounting possible Overload clutch for mid and end of stroke protection T-slot grooves in the cover tube for magnetic sensors Heavy duty motor with thermal switch Anti-coast brake for repeatable positioning on all ball screw models. Optional on acme screw models. Maintenance free General Specifications Parameter Screw type Internally restrained Manual override Dynamic braking Holding brake acme screw models ball screw models End of stroke protection Mid stroke protection Motor protection Motor connection Motor connector Certificates Options acme or ball yes, optional, self-locking yes overload clutch overload clutch Electrak LA24 auto reset thermal switch cable UL, CSA, CE potentiometer manual override Maximum load, dynamic / static AA -05A65M (acme screw)* AA -10A65M (acme screw) AA -20A65M (acme screw) AA -05B65M (ball screw) AA -10B65M (ball screw) AA -20B65M (ball screw) AA -21B65M (ball screw) Speed, at load / at maximum load AA -05A65M (acme screw)* AA -10A65M (acme screw) AA -20A65M (acme screw) AA -05B65M (ball screw) AA -10B65M (ball screw) AA -20B65M (ball screw) AA -21B65M (ball screw) Available input voltages Single phase Three phase Input frequency Vac model Vac model Standard stroke lengths [N] [mm/s] [Vac] [Hz] [inch] 1100 / / / / / / / / / / / / / / ** / , 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600 Operating temperature limits [ C] Full load duty 25 C [%] 25 Maximum on time [s] 45 End play, maximum [mm] 1,0 Restraining torque [Nm] 0 Lead cross section [mm 2 ] 1,5 Cable length [mm] 600 Protection class * Not possible with 400 Vac input voltage. ** 10 µf capacitor required to run the actuator, p/n Compatible Controls Control model IP45 See page DPDT switch 61

31 Linear Actuators Electrak LA and 400 Vac - load up to 6800 N S: stroke, tolerance acme / ball screw A: retracted length, tolerance acme / ball screw A1: cable A2: manual override input (optional) A3: housing dimensions for potentiometer option A4: potentiometer cable output, cable length = min. 500 mm B: 86,1 mm Stroke (S) [mm] Retracted length, acme screw models (A) [mm] 216,7 266,7 316,7 366,7 416,7 466,7 566,7 616,7 666,7 716,7 766,7 816,7 Retracted length, ball screw models (A) [mm] 269,6 319,6 369,6 419,6 469,6 519,6 619,6 669,6 719,6 769,6 819,6 869,6 Add on length for potentiometer* [mm] 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 Weight, acme screw models [kg] 6,0 6,2 6,4 6,6 6,8 7,0 7,3 7,5 7,7 7,9 8,1 8,3 Weight, ball screw models [kg] 6,8 7,0 7,2 7,4 7,6 7,8 8,1 8,3 8,5 8,7 8,9 9,1 Add on weight for potentiometer* [kg] 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 Potentiometer resistance change* [ohm/mm] * Potentiometer is optional (NPO, BPO option) Performance Diagrams Acme Screw Models Speed and Current vs. Load Ball Screw Models Speed and Current vs. Load V: speed I: current F: load 1: speed AA22-05A65M 2: speed AA -10A65M 3: speed AA -20A65M 4. current 230 Vac, AA22-05A65M 5: current 230 Vac, AA22-10A65M 6: current 400 Vac, AA42-10A65M 7: current 230 Vac, AA22-20A65M 8: current 400 Vac, AA42-20A65M V: speed I: current F: load 1: speed AA22-05B65M, AA42-05B65M 2: speed AA22-10B65M, AA42-10B65M 3: speed AA22-20B65M, AA42-20B65M 4: speed AA22-21B65M, AA42-21B65M 5. current 230 Vac, AA22-05B65M 6: current 400 Vac, AA42-05B65M 7: current 230 Vac, AA22-10B65M, AA22-20B65M 8: current 400 Vac, AA42-10B65M, AA42-20B65M 9: current 230 Vac, AA22-21B65M 10: current 400 Vac, AA42-21B65M 31

32 Linear Motion. Optimized. Electrak Throttle 12 and 24 Vdc - load up to 130 N» Ordering Key - see page 80» Glossary - see page 85» Electric Wiring Diagram - see page 59 Performance Specifications Standard Features and Benefits Designed for industrial applications Rugged aluminum housing with IP69K/IP67 sealing E-coated housing for corrosion resistance Minimal maintenance Integrated electronic options High end features at a low cost Integrated mounting holes General Specifications Parameter Screw type Internally restrained Manual override Dynamic braking with option CN with option NP, FN, FP Holding brake End of stroke protection Mid stroke protection Motor protection with temperature rating S with temperature rating E Motor connection worm yes yes (self locking) yes yes Electrak Throttle auto reset thermal switch flying leads or Deutsch connector Parameter Maximum load, dynamic / static ET -084 (1) ET -174 Speed, load / at max. load ET -084 (1) ET -174 [N] [mm/s] Electrak Throttle 45 / / / / 37 Available input voltages [VDC] 12, 24 Current draw, max. (2) 12 VDC models 24 VDC models [A] Operating temperature, min [ C] - 40 Operating temperature, max ET - - S ET - - E [ C] Full load duty 25 C (3) [%] 50 End play, maximum [mm] 1.5 Restraining torque [Nm] 0 Motor cable lead cross section [mm 2 ] 0.8 Motor cable length [mm] 165 Protection class IP69K, IP67 Operational life [cycles] Retracted length [mm] Stroke length [mm] 50.8 Weight [kg] 1.11 Analog feedback sensor linearity [± %] 1 (1) The ET -084 (high speed version) can only be ordered in combination with operating temperature rating E. (2) Max. current draw ratings do t include motor inrush current. Typical inrush current values are 12 A at 12 VDC and 6 A at 24 VDC. (3) For all models and load ranges. Certificates Options CE, RoHS extended temperature range adapter orientation right angle cable exit analog position feedback sensor internal end of stroke limit switches CanBus SAE J1939 Compatible Controls Control model See page DPDT switch (4) 61 (4) The DPDT switch cant be used in combination with CanBus. 32

33 Linear Actuators Electrak Throttle 12 and 24 Vdc - load up to 130 N Performance Diagrams ET -084 ET -174 Speed [mm/s] Current [A] Speed [mm/s] Current [A] speed speed 3 50 current 12 VDC current 12 VDC 2 25 current 24 VDC current 24 VDC Dynamic load [N] Dynamic load [N] 33

34 Linear Motion. Optimized. Max Jac 12 and 24 Vdc - load up to 800 N 34 Standard Features and Benefits Designed for industrial applications Rugged aluminum housing with IP69K High efficiency Long life Hard coat adizing for high corrosion resistance Virtually maintenance free Worm or ball screw models Non contact analog position feedback signal General Specifications Parameter Screw type Internally restrained Manual override Dynamic braking Self locking worm screw models ball screw models End of stroke protection Mid stroke protection Motor protection Motor connection worm or ball yes Max Jac flying leads or cable with connector Motor connector AMP Superseal Series 1,5 Certificates Options CE Encoder position feedback Performance Specifications Parameter Maximum load, dynamic / static MX W (worm screw) MX B (ball screw) Speed, at load / at maximum load MX W (worm screw) MX B (ball screw) [N] [mm/s] Max Jac 500 / / (1) 33 / / 30 Available input voltages [VDC] 12, 24 Standard stroke lengths [mm] 50,100, , 250 (2), 300 (2) Operating temperature limits [ C] -40 to +85 Full load duty 25 C [%] 25 End play, maximum [mm] 0,3 Restraining torque [Nm] 2 Lead cross section [mm 2 ] 1 Standard cable lengths [mm] 300, 1600 Protection class IP66/IP69K Salt spray resistance [h] 500 Life [cycles] (3) Analog position feedback signal [VDC] 0,5-4,5 Encoder position feedback option Supply voltage Pulses per mm, worm / ball screw Channels Duty Cycle vs. Load [VDC] 5 9,86 / 5,84 A, B (1) The static force (i.e. the backdriving force) for a ball screw unit varies and is dependant on the number of cycles it have been running and at wich loads. (2) Strokes possible for ball screw models only. (3) For ball screw actuator with 100 mm stroke, average load of 500 N and changing load direction. 25 C [%] ball screw worm screw » Ordering Key - see page 80» Glossary - see page Dynamic load [N]

35 Linear Actuators Max Jac 12 and 24 Vdc - load up to 800 N Stroke (S) [mm] * 300 * Retracted length (A) [mm] Weight [kg] 1,5 1,7 1,9 2,1 2,2 2,4 * Strokes possible for ball screw models only. Performance Diagrams Worm Screw Models (MX W) Ball Screw Models (MX B) Speed [mm/s] Current [A] Speed [mm/s] Current [A] , speed current 12 VDC current 24 VDC current 12 VDC speed current 24 VDC 6,7 5, ,7 1, Dynamic load [N] Dynamic load [N]

36 Linear Motion. Optimized. Lifting Column LC Vdc - load up to 1600 N» Ordering Key - see page 81» Glossary - see page 85» Electric Wiring Diagram - see page 57 Performance Specifications Standard Features and Benefits For medical and ergomic automation applications Self supporting column in extruded adized aluminum Low weight and extremily quiet operation Thomson Whispertrak drive techlogy High load torque capability Maintenance free Dynamic braking and load holding brake Electronic limit switches and mid-stroke protection Parameter LC1600 Maximum load [N] 1600 Maximum load torque, dynamic / static [Nm] 200 / 500 Speed, at load / at maximum load [mm/s] 11 / 6.5 Available input voltages [Vdc] 24 Standard stroke lengths (S) [mm] 200, 250, 300, 350, 400 Operating temperature limits [ C] 0 to +40 Full load duty 20 C [%] 10 Maximum on time [s] 60 Maximum sound level [db] 45 Lead cross section [mm 2 ] 1.5 Standard cable length LX version NX and NE versions Protection class [mm] IP44 General Specifications Parameter Screw type Internally restrained Manual override Dynamic braking Holding brake End of stroke protection Mid stroke protection Motor protection Motor connection Motor connector LX version NX and NE versions Certificates Options trapezoidal yes yes yes LC1600 electronic limit switches (ELS) yes cable flying leads Molex 8 pin plug CE ELS encoder position feedback Compatible Controls Control model See page DCG-154 for operation of single unit 66 DCG-254 for synchrous operation of two units Performance Diagrams Speed and Current vs. Load mm/s N V: speed I: current F: load 1: speed 2: current 66 36

37 Linear Actuators Lifting Column LC Vdc - load up to 1600 N A1 A1 S: stroke L: retracted length A1: mounting screws must t enter deeper than 10 mm. A2: LX version cable length = 900 mm, NX and NE versions = 1900 mm. A2 Stroke, retracted length and weight relationship Ordering stroke (S) [mm] Minimum retracted length (L min) [mm] Weight of unit [kg] The desired ordering stroke (S) will determine the minimum retracted length (L min) and the weight of the unit. The table provides the corresponding minimum retracted length (L min) and weight values to each of the available standard stroke lengths (S). 37

38 Linear Motion. Optimized. Lifting Column LC Vdc - load up to 2000 N» Ordering Key - see page 81» Glossary - see page 85» Electric Wiring Diagram - see page 57 Performance Specifications Parameter LC2000 Maximum load [N] 2000 Maximum load torque, dynamic / static [Nm] 150* / 500 Speed, at load / at maximum load [mm/s] 19 / 15 Available input voltages [Vdc] 24 Minimum ordering stroke (S) [mm] 200 Standard Features and Benefits For medical and ergomic automation applications Self supporting column in extruded adized aluminum Low weight and quiet operation Smooth operating telescopic lead screw drive High load torque capability Very short retracted length High extension to retraction ratio Maintenance free Load holding brake Integrated end of stroke limit switches EMC recognized for medical applications General Specifications Parameter Screw type Internally restrained Manual override LC2000 telescopic lead screw yes Dynamic braking (1) Holding brake yes Maximum ordering stroke (S) [mm] 600 Operating temperature limits [ C] 0 to +40 Full load duty 20 C [%] 15 Maximum on time [s] 60 Lead cross section [mm 2 ] 1.5 Standard cable length [mm] 2000 Protection class IP44 * Higher dynamic loads up to 400 Nm available upon request, contact customer support. Compatible Controls Control model See page DCG-180 for operation of single unit 66 DCG-280 for synchrous operation of two units Performance Diagrams 66 End of stroke protection end of stroke limit switches Speed and Current vs. Load Mid stroke protection (1) Motor protection (1) Motor connection Motor connector Certificates Options cable Molex 8 pin plug CE EMC for medical applications (2) encoder position feedback V: speed I: current F: load 1: speed 2: current (1) Dynamic braking, mid-stroke protection, and motor protection are provided when used with DCG control. (2) Emission: EN :2001, EN :1993, EN Class B Immunity: EN :2001, EN , EN

39 Linear Actuators Lifting Column LC Vdc - load up to 2000 N A1 A1 S: stroke L: retracted length A1: mounting screws must t enter deeper than 10 mm Stroke, retracted length and weight relationship Minimum Maximum Stroke (S) [mm] Retracted length (L) [mm] 250 or L min 441 Min. retracted length (L min) based on stroke (S) [mm] L min = (S + 282) / 2 Weight of unit based on stroke (S) [kg] Weight = L [mm] S [mm] The desired stroke (S) will determine the minimum retracted length (L min) and the weight of the unit. Units can be built with a retracted length (L) between the calculated L min value and maximum retracted length. Examples of strokes and the resulting minimum retracted length (L min) and weight Stroke (S) [mm] Minimum retracted length (L min) [mm] Weight [kg]

40 Linear Motion. Optimized. Lifting Column LC Vdc - load up to 3000 N» Ordering Key - see page 81» Glossary - see page 85» Electric Wiring Diagram - see page 57 Performance Specifications Parameter LC3000 Maximum load [N] 3000 Maximum load torque, dynamic / static [Nm] 400 / 500 Speed, at load / at maximum load [mm/s] 8 / 6 Available input voltages [Vdc] 24 Minimum ordering stroke (S) [mm] 200 Standard Features and Benefits For medical and ergomic automation applications Self supporting column in extruded adized aluminum Low weight and quiet operation Smooth operating ball screw drive High load torque capability Short retracted length Maintenance free Load holding brake Integrated end of stroke limit switches Maximum ordering stroke (S) [mm] 400 Operating temperature limits [ C] 0 to +40 Full load duty 20 C [%] 10 Maximum on time [s] 60 Lead cross section [mm 2 ] 1.5 Standard cable length [mm] 1900 Protection class IP44 General Specifications Parameter Screw type ball screw Internally restrained yes Manual override LC3000 Compatible Controls Control model See page DCG-180 for operation of single unit 66 DCG-280 for synchrous operation of two units 66 Dynamic braking (1) Holding brake yes End of stroke protection end of stroke limit switches Mid stroke protection (1) Performance Diagrams Speed and Current vs. Load Motor protection (1) Motor connection Motor connector Certificates Options cable Molex 8 pin plug CE encoder position feedback mm/s V: speed I: current F: load 1: speed 2: current (1) Dynamic braking, mid-stroke protection, and motor protection are provided when used with DCG control N

41 Linear Actuators Lifting Column LC Vdc - load up to 3000 N A1 A1 S: stroke L: retracted length A1: mounting screws must t enter deeper than 10 mm Stroke, retracted length and weight relationship Minimum Maximum Stroke (S) [mm] Retracted length (L) [mm] 330 or L min 530 Min. retracted length (L min) based on stroke (S) [mm] L min = S Weight of unit based on stroke (S) [kg] Weight = (( L [mm]) ) + (S [mm] + 70 ) ) The desired stroke (S) will determine the minimum retracted length (L min) and the weight of the unit. Units can be built with a retracted length (L) between the calculated L min value and maximum retracted length. Examples of strokes and the resulting minimum retracted length (L min) and weight Stroke (S) [mm] Minimum retracted length (L min) [mm] Weight [kg]

42 Linear Motion. Optimized. Lifting Column DMD 12, 24 and 36 Vdc - load up to 6800 N» Ordering Key - see page 81» Glossary - see page 85» Electric Wiring Diagram - see page 56 Performance Specifications Parameter DMD Standard Features and Benefits Designed for industrial use Rugged, robust and strong Self supporting column in extruded adized aluminum Acme or ball screw drive High load torque capability Overload clutch for mid and end of stroke protection T-slot grooves along the entire profile Maintenance free General Specifications Parameter Screw type Internally restrained Manual override Dynamic braking Holding brake acme screw models ball screw models End of stroke protection acme or ball yes, self-locking yes overload clutch DMD Maximum load, dynamic / static DMD -05A5 (acme screw) DMD -10A5 (acme screw) DMD -20A5 (acme screw) DMD -05B5 (ball screw) DMD -10B5 (ball screw) DMD -20B5 (ball screw) DMD -21B5 (ball screw) Maximum load torque, dynamic / static acme screw models ball screw models Speed, at load / at maximum load DMD -05A5 (acme screw) DMD -10A5 (acme screw) DMD -20A5 (acme screw) DMD -05B5 (ball screw) DMD -10B5 (ball screw) DMD -20B5 (ball screw) DMD -21B5 (ball screw) [N] [Nm] [mm/s] 1100 / / / / / / / / / / / / / / / / 11 Available input voltages [Vdc] 12, 24, 36 Standard stroke lengths [in] 4, 6, 8, 10, 12, 14, 16, 18, 20, 24 Operating temperature limits [ C] Full load duty 25 C [%] 25 End play, maximum [mm] 1,0 Restraining torque [Nm] 0 Lead cross section [mm 2 ] 2,5 Cable length [mm] 2000 Protection class IP65 Mid stroke protection Motor protection Motor connection Motor connector Certificates overload clutch auto reset thermal switch cable CE Compatible Controls Control model See page DPDT switch 61 AC Options potentiometer* * For encoder feedback, contact customer support. 42

43 Linear Actuators Lifting Column DMD 12, 24 and 36 Vdc - load up to 6800 N Off Center Load Capacity Fmax: maximum load operated La: length of lever arm 1: acme screw models 2: ball screw models S: stroke L: retracted length Stroke (S) [inch (mm)] 4 (101,6) 6 (152,4) 8 (203,2) 10 (254,0)12 (304,8)14 (355,6)16 (406,4)18 (457,2)20 (508,0) 24 (609,6) Retracted length (L), acme screw models [mm] 329,6 380,4 431,2 482,0 532,8 633,6 684,4 735,2 786,0 887,6 Retracted length (L), ball screw models [mm] 369,6 420,4 471,2 522,0 572,8 673,6 724,4 775,2 826,0 927,6 Add on length for potentiometer* [mm] 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 Weight, acme screw models [kg] 18,7 20,2 21,6 23,1 24,6 27,3 28,7 30,2 31,7 34,6 Weight, ball screw models [kg] 20,4 21,9 23,4 24,8 26,3 29,0 30,4 31,9 33,4 36,3 Add on weight for potentiometer* [kg] 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 * Potentiometer is optional Performance Diagrams Speed and Current vs. Load - Chart 1 Speed and Current vs. Load - Chart 2 V: speed I: current F: load 1: speed DMD -05A5 - chart 1 2: speed DMD -05B5 - chart 1 3: speed DMD -10A5 - chart 1 4: speed DMD -10B5 - chart 2 5: speed DMD -20A5 - chart 2 6: speed DMD -20B5 - chart 2 7: speed DMD -21B5 - chart 2 8: current DMD12-05A5 - chart 1 9: current DMD24-05A5 - chart 1 10: current DMD12-05B5 - chart 1 11: current DMD24-05B5 - chart 1 12: current DMD12-10A5 - chart 1 13: current DMD24-10A5 - chart 1 14: current DMD12-10B5 - chart 2 15: current DMD24-10B5 - chart 2 16: current DMD12-20A5 - chart 2 17: current DMD24-20A5 - chart 2 18: current DMD12-20B5 - chart 2 19: current DMD24-20B5 - chart 2 20: current DMD12-21B5 - chart 2 21: current DMD24-21B5 - chart 2 Contact customer service for data on 36 Vdc models. 43

44 Linear Motion. Optimized. Lifting Column DMA 230 and 400 Vac - load up to 6800 N» Ordering Key - see page 81» Glossary - see page 85» Electric Wiring Diagram - see page 58 Performance Specifications Parameter DMA Standard Features and Benefits Designed for industrial use Rugged, robust and strong Self supporting column in extruded adized aluminum Acme or ball screw drive High load torque capability Overload clutch for mid and end of stroke protection T-slot grooves along the entire profile Maintenance free General Specifications Parameter Screw type Internally restrained Manual override Dynamic braking Holding brake acme screw models ball screw models End of stroke protection Mid stroke protection Motor protection Motor connection Motor connector Certificates Options acme or ball yes, self-locking yes overload clutch overload clutch DMA auto reset thermal switch cable CE potentiometer Maximum load, dynamic / static DMA22-05A5 (acme screw)* DMA -10A5 (acme screw) DMA -20A5 (acme screw) DMA -05B5 (ball screw) DMA -10B5 (ball screw) DMA -20B5 (ball screw) DMA -21B5 (ball screw) Maximum load torque, dynamic / static acme screw models ball screw models Speed, at load / at maximum load DMA22-05A5 (acme screw)* DMA -10A5 (acme screw) DMA -20A5 (acme screw) DMA -05B5 (ball screw) DMA -10B5 (ball screw) DMA -20B5 (ball screw) DMA -21B5 (ball screw) Available input voltages Single phase** Three phase Input frequency Vac model Vac model [N] [Nm] [mm/s] [Vac] [Hz] 1100 / / / / / / / / / / / / / / / / /60 50 Standard stroke lengths [in] 4, 6, 8, 10, 12, 14, 16, 18, 20, 24 Operating temperature limits [ C] Maximum on time [s] 45 Full load duty 25 C [%] 25 End play, maximum [mm] 1,0 Restraining torque [Nm] 0 Lead cross section [mm 2 ] 2,5 Cable length [mm] 2000 Protection class * Not possible with 400 Vac input voltage ** 10 µf capacitor required to run the actuator, p/n Compatible Controls IP45 Control model See page DPDT switch 61 44

45 Linear Actuators Lifting Column DMA 230 and 400 Vac - load up to 6800 N Off Center Load Capacity Fmax: maximum load operated La: length of lever arm 1: acme screw models 2: ball screw models S: stroke L: retracted length Stroke (S) [inch (mm)] 4 (101,6) 6 (152,4) 8 (203,2) 10 (254,0) 12 (304,8) 14 (355,6) 16 (406,4) 18 (457,2) 20 (508,0) 24 (609,6) Retracted length (L), acme screw models [mm] 329,6 380,4 431,2 482,0 532,8 633,6 684,4 735,2 786,0 887,6 Retracted length (L), ball screw models [mm] 369,6 420,4 471,2 522,0 572,8 673,6 724,4 775,2 826,0 927,6 Add on length for potentiometer* [mm] 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 Weight, acme screw models [kg] 20,9 22,4 23,8 25,3 26,8 29,5 30,9 32,4 33,9 36,8 Weight, ball screw models [kg] 22,6 24,1 25,6 27,0 28,5 31,2 32,6 34,1 35,6 38,6 Add on weight for potentiometer* [kg] 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 * Potentiometer is optional Performance Diagrams Speed and Current vs. Load - Chart 1 Speed and Current vs. Load - Chart 2 V: speed I: current F: load 1: speed DMA22-05A5 - chart 1 2: speed DMA -05B5 - chart 1 3: speed DMA -10A5 - chart 1 4: speed DMA -10B5 - chart 2 5: speed DMA -20A5 - chart 1 6: speed DMA -20B5 - chart 2 7: speed DMA -21B5 - chart 2 8: current DMA22-05A5 - chart 1 9: current DMA22-05B5 and DMA22-10A5 - chart 1 10: current DMA42-05B5 - chart 1 11: current DMA42-10A5 - chart 1 12: current DMA22-10B5 and DMA22-20B5 - chart 2 13: current DMA42-10B5 - chart 2 14: current DMA22-20A5 - chart 1 15: current DMA42-20A5 - chart 1 16: current DMA42-20B5 - chart 2 17: current DMA22-21B5 - chart 2 18: current DMA42-21B5 - chart 2 45

46 Linear Motion. Optimized. Rodless Actuator LM80-H 12 and 24 Vdc - load up to 2000 N» Ordering Key - see page 82» Glossary - see page 85» Electric Wiring Diagram - see page 57 Performance Specifications Parameter LM80-H Maximum load (Fb) [N] 2000 Standard Features and Benefits Rodless actuator for horizontal operation For use in domestic, office or medical applications Rigid self supporting extruded aluminum profile Durable and corrosion free Lightweight and quiet operation Safety nut on ball screw versions Easy and fast T-slot mounting Maintenance free General Specifications Parameter Screw type Internally restrained Manual override Dynamic braking Holding brake End of stroke protection Mid stroke protection Motor protection LM80-H trapezoidal or ball yes spring loaded soft stop Maximum load torque (Mb) DT -T68M H DT -B61M H DT -B62M H DT -B65M H Speed, at load / at maximum load DT -T68M H DT -B61M H DT12 -B62M H DT24 -B62M H DT -B65M H [Nm] [mm/s] / / / / / 28 Available input voltages [Vdc] 12, 24 Standard stroke lengths [mm] 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500 Operating temperature limits [ C] Full load duty 20 C [%] 15 Maximum on time [s] 120 End play, maximum [mm] 1,0 Restraining torque [Nm] 0 Lead cross section with / without motor enclosure Cable length with / without motor enclosure Protection class with / without motor enclosure [mm 2 ] [mm] 1,5 / 2000 / IP44 / IP33 46 Motor connection with motor enclosure motor enclosure Motor connector with motor enclosure motor enclosure Certificates Options * Contact customer support cable cable, clips on motor 8-pole Molex mini-fit jr clips on motor CE motor enclosure manual override alternative motor positions stroke over 1500 mm* encoder * Compatible Controls Control model See page DPDT switch 61 DCG AC-247 ELS 64

47 Linear Actuators Rodless Actuator LM80-H 12 and 24 Vdc - load up to 2000 N! Note: this unit may only be mounted horizontaly. S: stroke L: length of profile A1: motor shown in position A (standard position) Stroke (S) [mm] Dimensions (A) / (B) [mm] DT -T68M H DT -B61M H DT -B62M H DT -B65M H 54,0 / 77,0 102,0 / 77,0 102,0 / 77,0 79,0 / 77,0 Weight DT -T68M H DT -B61M H DT -B62M H DT -B65M H [kg] 11,2 12,1 12,1 11,7 13,1 13,9 13,9 13,5 14,8 15,7 15,7 15,3 16,6 17,5 17,5 17,1 18,1 19,3 19,3 18,9 20,2 21,0 21,0 20,6 22,0 22,9 22,9 22,4 23,8 24,6 24,6 24,2 25,5 26,3 26,3 26,0 27,4 28,2 28,2 27,8 29,1 30,0 30,0 29,6 Performance Diagrams Definition of Forces Speed and Current vs. Load Deflection of Profile V: speed I: current F: load 1: speed DT -T68M H 2: speed DT -B61M H 3: speed DT12-B62M H 4: speed DT24-B62M H 5: speed DT -B65M H 6: current DT12-T68M H 7: current DT24-T68M H and DT24-B61M H 8: current DT12-B61M H 9: current DT12-B62M H 10: current DT24-B62M H 11: current DT12-B65M H 12: current DT24-B65M H F: load Lf: distance between mounting points 1: maximum allowed deflection 47

48 Linear Motion. Optimized. Rodless Actuator LM80-V 12 and 24 Vdc - load up to 2000 N» Ordering Key - see page 82» Glossary - see page 85» Electric Wiring Diagram - see page 57 Performance Specifications Standard Features and Benefits Rodless actuator for vertical operation with motor down For use in domestic, office or medical applications Rigid self supporting extruded aluminum profile Durable and corrosion free Holding brake prevents downward motion at power off Lightweight and quiet operation Safety nut on ball screw versions Easy and fast T-slot mounting Optional spline safety function Maintenance free General Specifications Parameter Screw type Internally restrained Manual override Dynamic braking Holding brake End of stroke protection Mid stroke protection Motor protection Motor connection with motor enclosure motor enclosure Motor connector with motor enclosure motor enclosure LM80-V trapezoidal or ball yes yes spring loaded soft stop cable cable, clips on motor 8-pole Molex mini-fit jr clips on motor Parameter Maximum load (Fa) DT -T68M V(F) DT -B61M V(F) DT -B62M V(F) DT -B65M V(F) Maximum load torque (Ma) DT -T68M V(F) DT -B61M V(F) DT -B62M V(F) DT -B65M V(F) Speed, at load / at maximum load DT12 -T68M V(F) DT24 -T68M V(F) DT12 -B61M V(F) DT24 -B61M V(F) DT12 -B62M V(F) DT24 -B62M V(F) DT12 -B65M V(F) DT24 -B65M V(F) [N] [Nm] [mm/s] LM80-V / / / / / / / / 22 Available input voltages [Vdc] 12, 24 Standard stroke lengths [mm] 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500 Operating temperature limits [ C] Full load duty 20 C [%] 15 Maximum on time [s] 120 Restraining torque [Nm] 0 Lead cross section with / without motor enclosure Cable length with / without motor enclosure Protection class with / without motor enclosure Compatible Controls [mm 2 ] [mm] 1,5 / 2000 / IP44 / IP33 Certificates Options * Contact customer support 48 CE motor enclosure manual override alternative motor positions spline safety function stroke over 1500 mm* encoder * Control model See page DPDT switch 61 DCG AC-247 ELS 64

49 Linear Actuators Rodless Actuator LM80-V 12 and 24 Vdc - load up to 2000 N! Note: this unit may only be mounted vertically with the motor down even if drawing shows it horizontaly. S: stroke L: length of profile A1: motor shown in position A (standard position) Stroke (S) [mm] Dimensions (A) / (B) [mm] DT -T68M V DT -B61M V DT -B62M V DT -B65M V DT -T68M F DT -B61M F DT -B62M F DT -B65M F 50,0 / 71,0 53,0 / 120,0 53,0 / 120,0 53,0 / 97,0 50,0 / 90,0 53,0 / 144,0 53,0 / 144,0 53,0 / 126,0 Weight* DT -T68M V DT -B61M V DT -B62M V DT -B65M V [kg] 11,1 11,6 11,6 12,0 12,9 13,4 13,4 13,8 14,7 15,2 15,2 15,6 * Add 0,5 kg to the below weights to get the weights for DT -T68M F, DT -B61M F, DT -B62M F and DT -B65M F. 16,5 17,0 17,0 17,6 18,2 18,7 18,7 19,3 20,0 20,5 20,5 21,1 21,8 22,3 22,3 22,9 23,6 24,1 24,1 24,7 25,4 25,9 25,9 26,5 27,2 27,7 27,7 28,2 28,9 29,5 29,5 30,1 Performance Diagrams Definition of Forces Speed and Current vs. Load V: speed I: current F: load 1: speed DT12-T68M V(F) 2: speed DT24-T68M V(F) 3: speed DT12-B61M V(F) 4: speed DT24-B61M V(F) 5: speed DT12-B62M V(F) 6: speed DT24-B62M V(F) 7: speed DT12-B65M V(F) 8: speed DT24-B65M V(F) 9: current DT12-T68M V(F) 10: current DT24-T68M V(F) 11: current DT12-B61M V(F) 12: current DT24-B61M V(F) 13: current DT12-B62M V(F) 14: current DT24-B62M V(F) 15: current DT12-B65M V(F) 16: current DT24-B65M V(F) 49

50 Linear Motion. Optimized. Rodless Actuator LM80-I 24 Vdc - load up to 2000 N» Ordering Key - see page 83» Glossary - see page 85» Electric Wiring Diagram - see page 57 Performance Specifications Standard Features and Benefits Rodless actuator for vertical operation with motor down For use in domestic, office or medical applications Rigid self supporting extruded aluminum profile Durable and corrosion free Holding brake prevents downward motion at power off Lightweight and quiet operation Safety nut on ball screw versions Easy and fast T-slot mounting Maintenance free General Specifications Parameter Screw type Internally restrained Manual override Dynamic braking Holding brake End of stroke protection LM80-I trapezoidal or ball yes yes spring loaded soft stop Parameter Maximum load (Fa) DT24-T68M GCV DT24-B61M GCV DT24-B62M GCV DT24-B65M GCV Maximum load torque (Ma) DT24-T68M GCV DT24-B61M GCV DT24-B62M GCV DT24-B65M GCV Speed, at load / at maximum load DT24-T68M GCV DT24-B61M GCV DT24-B62M GCV DT24-B65M GCV [N] [Nm] [mm/s] LM80-I / / / / 13 Available input voltages [Vdc] 24 Standard stroke lengths [mm] 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500 Operating temperature limits [ C] Full load duty 20 C [%] 15 Maximum on time [s] 120 Restraining torque [Nm] 0 Lead cross section [mm 2 ] 1,5 Cable length [mm] 2000 Protection class IP44 Mid stroke protection Motor protection Motor connection Motor connector Certificates Options * Contact customer support cable 8-pole Molex mini-fit jr CE manual override encoder stroke over 1500 mm* Compatible Controls Control model See page DPDT switch 61 DCG DCG AC-247 ELS 64 50

51 Linear Actuators Rodless Actuator LM80-I 24 Vdc - load up to 2000 N! Note: this unit may only be mounted vertically with the motor down even if drawing shows it horizontaly. S: stroke L: length of profile A: n motor side B: motor side Stroke (S) [mm] Dimensions (A) / (B) [mm] DT24-T68M GCV DT24-B61M GCV DT24-B62M GCV DT24-B65M GCV 50,0 / 238,0 53,0 / 287,0 53,0 / 287,0 53,0 / 264,0 Weight DT24-T68M GCV DT24-B61M GCV DT24-B62M GCV DT24-B65M GCV [kg] 11,1 11,6 11,6 12,0 12,9 13,4 13,4 13,8 14,7 15,2 15,2 15,6 16,5 17,0 17,0 17,6 18,2 18,7 18,7 19,3 20,0 20,5 20,5 21,1 21,8 22,3 22,3 22,9 23,6 24,1 24,1 24,7 25,4 25,9 25,9 26,5 27,2 27,7 27,7 28,2 28,9 29,5 29,5 30,1 Performance Diagrams Definition of Forces Speed and Current vs. Load V: speed I: current F: load 1: speed DT24-T68M GCV 2: speed DT24-B61M GCV 3: speed DT24-B62M GCV 4: speed DT24-B65M GCV 5: current DT24-T68M GCV 6: current DT24-B61M GCV 7: current DT24-B62M GCV 8: current DT24-B65M GCV 51

52 Linear Motion. Optimized. Electrak Non-driven Actuator PPA-M Load up to 6670 N» Ordering Key - see page 84» Glossary - see page 85 Performance Specifications Parameter PPA-M Maximum load, dynamic / static [N] 6670 / Maximum speed at max. load [mm/s] 8 Maximum input torque [Nm] 9 Standard Features and Benefits Actuator with double input shafts to which a customer supplied motor or/and an intermediate shaft can be mounted Can be operated manually Robust and versatile Withstands very harsh environments Highly efficient ball screw drive system Holding brake prevents back driving Trunnion to clevis mounting Maintenance free Maximum input speed [rpm] 100 Standard stroke lengths [in] 4, 8, 12, 18, 24, 36 Operating temperature limits [ C] End play, maximum [mm] 1,0 Restraining torque [Nm] 23 General Specifications Parameter Electrak PPA-M Screw type Internally restrained Manual override Holding brake End of stroke protection Mid stroke protection ball * yes Certificates Options protective bellows * Either of the two input shafts can be used for manual operation if both shafts are t connected to a motor or an intermediate shaft. 52

53 Linear Actuators Electrak Non-driven Actuator PPA-M Load up to 6670 N S: stroke A: retracted length B: retracted length to trunnions Stroke (S) [mm] 101,6 203,2 304,8 457,2 609,6 914,4 Retracted length (A) [mm] 375,9 477,5 579,1 782,3 934,7 1239,5 Retracted length to trunnions (B) [mm] 223,5 325,1 426,7 629,9 782,3 1087,1 Weight [kg] 3,4 4,2 4,8 6,1 7,3 9,7 Synchrous Operation Two or more PPA-M actuators can easily be mechanically linked for synchrous operation by using intermediate shafts. The intermediate shafts and necessary couplings are provided by the customer. 53

54 Linear Motion. Optimized. Electrak Non-driven Actuator FA14 Load up to 6800 N» Ordering Key - see page 84» Glossary - see page 85 Performance Specifications Parameter FA14 Standard Features and Benefits Actuator with a flange where a customer supplied motor can be mounted Rugged and robust Withstands very harsh environments Stainless steel extension tube Corrosion free aluminium cover tube Acme or ball screw drive Trunnion mounting possible Overload clutch for mid and end of stroke protection T-slot grooves in the cover tube for magnetic sensors Maintenance free Maximum load, dynamic / static FA14-05A65 (acme screw) FA14-10A65 (acme screw) FA14-20A65 (acme screw) FA14-05B65 (ball screw) FA14-10B65 (ball screw) FA14-20B65 (ball screw) FA14-21B65 (ball screw) Maximum speed at max. load* FA14-05A65 (acme screw) FA14-10A65 (acme screw) FA14-20A65 (acme screw) FA14-05B65 (ball screw) FA14-10B65 (ball screw) FA14-20B65 (ball screw) FA14-21B65 (ball screw) [N] [mm/s] 1100 / / / / / / / Maximum input torque [Nm] 1,8 Maximum input speed [rpm] 3000 Standard stroke lengths [mm] 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550,600 General Specifications Parameter Screw type acme or ball Internally restrained yes FA14 Operating temperature limits [ C] End play, maximum [mm] 1,0 Restraining torque [Nm] 0 * Recommended maximum speed Manual override Holding brake acme screw versions ball screw versions End of stroke protection Mid stroke protection Certificates Options * Contact customer support, optional, self-locking yes overload clutch overload clutch CE manual override alternative adaptor positions custom color* 54

55 Linear Actuators Electrak Non-driven Actuator FA14 Load up to 6800 N S: stroke, tolerance acme / ball screw A2: manual override input (optional) A: retracted length, tolerance acme / ball screw Note: The standard flange for FA14 is IEC 80. A1: minimum/maximum input shaft bore in the coupling (supplied with a 6 mm hole) Stroke (S) [mm] Retracted length (A), acme screw models [mm] 216,7 266,7 316,7 366,7 416,7 466,7 566,7 616,7 666,7 716,7 766,7 816,7 Retracted length (A), ball screw models [mm] 269,6 319,6 369,6 419,6 469,6 519,6 619,6 669,6 719,6 769,6 819,6 869,6 Weight, acme screw models [kg] 3,5 3,7 4,0 4,2 4,5 4,7 5,0 5,2 5,5 5,7 6,0 6,3 Weight, ball screw models [kg] 4,2 4,5 4,7 5,0 5,2 5,5 5,7 6,0 6,2 6,5 6,7 7,0 Optional Flanges Overview Description Outer dimension on flange [mm] Flange inner diameter [mm] Hole circle (HC) [mm] Pilot Spigot Ø Total length [mm] Nema 23 Ø90 38,1 Ø66,675 38,1 68 Nema 34 92x92 74 Ø ,5 IEC 63 B14 Ø90 - Ø Servo 80, S80 92x92 - Ø IL348 85x85 - Ø AKM3x-AN Ø90 50 Ø AKM4x-AN 92x92 74 Ø ,5 Note: Optional flanges are available separately as conversion kits. Part number see page

56 Linear Motion. Optimized. Electrical Wiring Diagrams DC-actuators Electrak 1 and 1SP Electrak 10, LA14 DPDT Switch DPDT Switch Retract Off Extend Retract Off Extend ( ) ( ) Input Voltage Black* Actuator Input Voltage Black Actuator (+) (+) Yellow Red * Black for 12 Vdc supply voltage White for 24 Vdc supply voltage Blue for 36 Vdc supply voltage Potentiometer Output on Electrak 1SP Connect the yellow lead to positive and black, white or blue* to negative to extend the actuator. Change polarity to retract the actuator. The potentiometer output has 0 ohm between white and red when the actuator is fully retracted. The actuator should be protected from overload conditions by a customer provided fuse in the circuit (6 A for 12 Vdc, 3 A for 24 Vdc and 2 A for 36 Vdc). Red White Black Optional Potentiometer Output Grey Yellow Green Connect the red lead to positive and black to negative to extend the actuator. Change polarity to retract the actuator. The potentiometer output has 0 ohm between grey and yellow when the actuator is fully extended. Electrak 050 ( ) DPDT Switch Retract Off Extend DMD ( ) DPDT Switch Retract Off Extend Input Voltage Red Actuator Input Voltage Blue Actuator (+) (+) Black Brown Optional Potentiometer Output Red White Blue Connect the brown lead to positive and blue to negative to extend the actuator. Change polarity to retract the actuator. Connect the black lead to positive and red to negative to extend the actuator. Change polarity to retract the actuator. The potentiometer output has 0 ohm between white and red when the actuator is fully retracted. 56

57 Linear Actuators Electrical Wiring Diagrams DC-actuators Electrak PPA-DC LC1600 ( ) DPDT Switch Retract Off Extend Black Actuator (+) Input Voltage ( ) S2 F Red Black White EXT LC E M Input Voltage Red Green Brown RET COM (+) Black STOP Red Black Red 4 With Optional End of Stroke Limit 5 Switches Output 6 Black Red With Optional Potentiometer Output With Optional Encoder Output Black Red 1 With Optional 2 Encoder 3 and 4 End of Stroke Limit Switches 5 Outputs 6 (+) ( ) (+) S ( ) Connect the white (EXT) and brown (COM) leads to extend the actuator. To retract the actuator connect the green (RET) and brown (COM) leads. The actuator will automatically switch off when reaching the ends of stroke or a mid-stroke overload. With encoder feedback (NE) or with feedback options (NX): For the LC1600, only use the NE and NX versions with the DCG control. LC2000 / 3000, LM80-H/ -V / -I Connect the black lead to positive and red to negative to extend the actuator. Change polarity to retract the actuator. The encoder is supplied with 4,5-12 Vdc between terminals 4 or 1 and 6 or 3 and the pulse train signal is generated on terminal 5 or 2. The potentiometer output has 0 ohm between terminal 4 and 5 when the actuator is fully retracted. ( ) Input Voltage DPDT Switch Retract Off Extend 8 Red Actuator (+) 4 Green Molex Pin Configuration (front view) 2 Black (+) Optional Encoder Output 7 1 Brown Purple (-) S Yellow S2 Connect the green lead to positive and red to negative to extend the actuator. Change polarity to retract the actuator. The encoder is supplied with 5-18 Vdc on pin 2 and 7 and the two pulse train signals are generated on pin 1 and 5. 57

58 Linear Motion. Optimized. Electrical Wiring Diagrams AC-actuators Electrak 5, LA24 and DMA Vac Electrak 5, LA24 and DMA Vac Without anti coast brake* Without anti coast brake* DPDT Switch Relays Actuator L1 Retract Off Extend Capacitor** Black (1) Actuator L1 L2 L3 Extend White (1) Red (2) Black (3) Retract Input Voltage Red (2) Input Voltage N White (3) PE Yellow/Green PE Yellow/Green With anti coast brake* With anti coast brake* L1 DPDT Switch Retract Off Extend Capacitor** Black (1) Actuator L1 L2 L3 N Relays Extend White (1) Red (2) Black (3) Orange (4) Actuator Input Voltage Red (2) Input Voltage Retract Brake* Orange (4) Brake* N White (3) PE Yellow/Green PE Yellow/Green * Anti coast brake is standard on Electrak 5 / LA24 for ball screw models and optional for acme screw models.on DMA there are anti coast brake on acme models while ball screw models always are equipped with an anti coast brake. ** 10 µf capacitor required to run the actuator, p/n Leads can be either color or number marked. Connect black (1) lead to L1 and white (3) lead to N (neutral) to retract the actuator. Change L1 from lead black (1) to lead red (2) to extend the actuator. If the actuator is equipped with an anti coast brake, release the brake by connecting orange (4) lead lead to L1. * Anti coast brake is optional on Electrak 5 / LA24 on both acme and ball screw models. On DMA there are anti coast brake on acme models while ball screw models always are equipped with an anti coast brake. Leads can be either color or number marked. Connect white (1) lead to L1, red (2) lead to L2 and black (3) lead to L3 to extend the actuator. Change the places of white (2) lead and black (3) to to retract the actuator. If the actuator is equipped with an anti coast brake, release the brake by connecting orange (4) lead to N (neutral). 58

59 Linear Actuators Electrical Wiring Diagrams DC-actuators Electrak Throttle Connect the actuator according to the table below. Actuator will extend if connected as in the table, shift polarity between red (pin 1) and black (pin 3) leads and it will retract. Mating Deutsch connector kit can be ordered from Thomson (P/N ). Note: Connector pin 2 is t used, but contains a sealing plug. Option name and order key code Lead color or Deutsch DTM04-6P connector pin number Red (1) Black ( 3) Brown (4) White (5) Green (6) Analog position feedback sensor (NP) Motor (+) Motor (-) VDC in (+) VDC out VDC in (-) End of stroke limit switches (FN) Motor (+) Motor (-) Analog position feedback sensor and limit switches (FP) Motor (+) Motor (-) VDC in (+) VDC out VDC in (-) CANBUS SAE J1939 (CN) Power (+) Power (-) CAN High CAN Shield* CAN Low See Installation Manual for additional information. * Not required to connect Deutsch connector rear view Analog Position Feedback Sensor Installation Data Brown (pin 3) and green (pin 6) are connected to a voltage source. When extending the actuator the voltage will increase between green (pin 6) and white (pin 5). VDC in (+) VDC out VDC in (-) Sensor Specifications Input voltage, max. (VDC in) [VDC] 32 brown white green Output voltage (VDC out) at fully retracted at fully extended [VDC] < 5 % VDC in > 75% VDC in Max. output current [ma] 1 Sensor Linearity [± %] 1 Retract Extend 59

60 Linear Motion. Optimized. Actuator Controls General Whether you plan to operate from a simple pushbutton or a programmable controller, Thomson controls can make your system easy to design, install and operate. Designed to drive actuators, the controls on the following pages are equipped either with easy to use terminal strips or plugs compatible with the actuators for ease of wiring. The controls can be operated manually via external push buttons/switches, hand held pendants or from electronic controls such as a PLC. We also have other actuator controls which may meet your particular needs. Contact customer service if you don t see the right control for your application. 60

61 Linear Actuators Actuator Controls Switches DPDT Switch Specifications Parameter DPDT Switch Maximum voltage [Vac] 270 Maximum current [A] 15 Part number Robust switch Double pole, double throw (DPDT) 15 A rating at 270 Vac Center off Two momentary contacts Wiring diagram on label Actuator Compatibility Electrak 1, Electrak 1SP, Electrak 050, Electrak PPA-DC, Electrak 10, Electrak LA14, Electrak 5, Electrak Throttle, Electrak LA24, LC, DMD, DMA, LM80-H, LM80-V, LM80-I, DGB Wiring Diagram Dimensions! Note: sometimes the switch can manage higher current than the actuator and sometimes it is the other way around. Always make sure that both the switch and the actuator can manage the current that the application require. 61

62 Linear Motion. Optimized. Actuator Controls Electronic Controls Control AC-063 Dimensions AC-O63B Rugged and robust control designed to operate under the hardest conditions Auto shut off function if the current or duty cycle limits of the control is exceeded. Robust plastic enclosure Versions for DC or AC supply voltage Versions with or without limit switch inputs Versions with or without control pendant AC-O63BC Actuator Compatibility AC-063B AC-063BC AC-063C Electrak PPA-DC, Electrak 10, Electrak LA14, DMD Electrak PPA-DC, Electrak 10, Electrak LA14, DMD Electrak PPA-DC, Electrak 10, Electrak LA14, DMD AC-O63C! Note: sometimes the control can manage higher current and/or duty cycle than the actuator and sometimes it is the other way around. Always make sure that both the control and the actuator can manage the current and duty cycle that the application require. 62

63 Linear Actuators Actuator Controls Electronic Controls Control AC-063 Specifications Parameter AC-063B AC-063BC AC-063C Input voltage Vdc 50 Hz [V] Output voltage [Vdc] Output current, 12 Vdc 24 Vdc 36 Vdc output [A] Max. duty 25 C [%] Weight of control [kg] 0,4 0,4 0,4 0,4 3 3 Protection class IP65 IP65 IP54 IP54 IP54 IP54 Limit switch inputs yes yes yes Control pendant included yes yes yes yes Certificates CE CE CE CE CE CE Part number DC24-1B DCA24-1B DC24-1BC DCA24-1BC DC24-1C DCA24-1C Wiring Diagram AC-O63B AC-O63C Input voltage Actuator motor Input voltage (connections done to the transformer) Yellow Black Retract input Extend input Stop retract input* Terminal strip Actuator motor Stop extend input* AC-O63BC Control pendant Red Blue Brown Stop retract input* Terminal strip Input voltage Stop extend input* Actuator motor Control pendant Red Blue Brown Terminal strip * On models without stop retract and stop extend inputs these terminals are t available. Stop retract input* Stop extend input* 63

64 Linear Motion. Optimized. Actuator Controls Electronic Controls Control AC-247 ELS Dimensions Connector for actuator motor included Compact, robust and light weight Electronic limit switches (ELS) stop the actuator at end of stroke if the actuator runs into an obstacle Connector input for DCG14-1H control pendant Input for control pendant DCG14-1H Actuator Compatibility Electrak 1, Electrak 1SP, Electrak 050, LM80-H, LM80-V, LM80-I Wiring Diagram Power supply cable AC-247 ELS Input voltage Actuator motor Extend Retract Brown Blue Red Brown Blue Connector HS* Connector M1**! Note: sometimes the control can manage higher current and/or duty cycle than the actuator and sometimes it is the other way around. Always make sure that both the control and the actuator can manage the current and duty cycle that the application require. * The diagram shows the control connected to control pendant DCG14-1H, but any type of rmally open contacts can be used to control the direction of the actuator. ** Each motor lead must be connected to two pins in the connector in order to t exceed the current limit of the connector. 64

65 Linear Actuators Actuator Controls Electronic Controls Control AC-247 ELS Specifications Parameter AC-247 ELS AC-247 ELS AC-247 ELS Input voltage [Vdc] 12 or Output voltage [Vdc] 12 or Output current, 12 Vdc 24 Vdc output [A] Max. duty 25 C [%] Weight of control [kg] 0,3 0,3 0,3 Protection class IP54 IP54 IP54 Electronic limit switches yes yes yes Connector for control pendant yes 1 yes 1 yes 1 Control pendant included 1 Certificates CE CE CE Part number D D D Control pendant type DCG14-1H is recommended, see page

66 Linear Motion. Optimized. Actuator Controls Electronic Controls» Ordering Key - see page 83» Glossary - see page 85 Control DCG Dimensions Controls available for single actuator operation or synchrous operation of two actuators equipped with encoders. Small and light weight control operated via a control pendant which is ordered separately Built in Electronic Limit Switches (ELS) stop the actuator automatically at end of stroke or mid stroke stall The control pendant is ordered separately The Control to Actuator cable is ordered separately and comes in several version depending of the type of actuator being used Wiring Diagram No wiring is necessary to the control. All connections are done through plugs. Actuator Compatibility DCG-150 DCG-160 DCG-170 DCG-180 DCG-190 Electrak 1, Electrak 1SP, Electrak 050 1, Max Jac, LC1600 LM80-V LM80-H LC2000, LC3000, LM80-I LA10, LA14, PPA-DC, DMD DCG-250 Synchrous operation of two LC DCG-260 Synchrous operation of two LM80-I 2 DCG-280 Synchrous operation of two LC2000, LC This control does t work with Electrak 050 that has the limit switch option ( FS or PF option). 2 The units must be equipped with encoders. LM80-I can t have spline safety function.! Note: sometimes the control can manage higher current and/or duty cycle than the actuator and sometimes it is the other way around. Always make sure that both the control and the actuator can manage the current and duty cycle that the application require. 66

67 Linear Actuators Actuator Controls Electronic Controls DCG Controls Overview Specifications Parameter DCG-150 DCG-160 DCG-170 DCG-180 DCG-190 DCG DCG DCG Input voltage 1 [Vac] ± 6% Input frequency [Hz] 50/60 Output voltage [Vdc] 24 Output current, max. 2 up down Operating temperature limits [A] 4 4 [ C] 8 5, Max. duty 25 C 3 [%] x 5,6 Maximum on time [s] Weight of control [kg] 0.5 Protection class Class 1 (t for outdoor use) Electronic limit switches yes yes yes yes yes yes 6 yes 6 yes 6 Included control pendant 4 2 x Certificates CE Vac input voltage also available. Contact customer support. 2 These controls are current limited. Review the current/load curves for the actuator you selected to make sure the control will provide eugh current for the thrust you need. You may need to select one of the AC-063 or AC-247 ELS controls. 3 Control will shut off if duty cycle is exceeded and automatically reset when cooled off. 4 Control pendant type DCG14-1H is recommended, see page Control for synchrous operation of two LM80-I rodless actuators. Contact customer support for information on synchrous operation of other actuator models. 6 DCG-250, DCG-260, DCG-280 uses a pulse counting function instead of current sensing to determine if the actuator is moving at the correct speed. If the pulses arrives too slowly or t at all the control will stop the motion of both actuators. 7 Control for synchrous operation of two LC1600 lifting columns. 8 Control for synchrous operation of two LC2000 or LC3000 lifting columns. Contact customer support for information on synchrous operation of other actuator models. 67

68 Linear Motion. Optimized. Actuator Controls Control Accessories DCG Control Pendant Specifications Parameter DCG14-1H Weight [kg] 0,4 Cable length [mm] 1200 Certificates Part number CE DCG14-1H Handy and light weight control pendant with spiral cord cable which connects to the DCG, AC-063 (possible on BC and C versions only) and AC-247 ELS control pendant input with a plug Control to Control Cable for DCG, AC-063 and AC-247 ELS Controls This cable connects with its plug to the control pendant input on DCG, AC-063 (possible on BC and C versions only) and AC-247 ELS in order to connect the control to ather device than the DCG control pendant Specifications Parameter Lead cross section [mm 2 ] 7 0,14 Cable length [mm] 2450 Part number D

69 Linear Actuators Actuator Controls Control Accessories Control to Actuator Cables with Single Connector for DCG Controls Specifications Parameter Lead cross section [mm 2 ] 4 0, ,5 4 0, ,5 Cable length [mm] Connects the DCG control to actuators without connector Part number D D