Overview of Types 1. Order code 20. Control SR-DCG 22. Control SR-AC Contact 27

Transcription

1

2 Title Page Overview of Types 1 SR-LC1600 datasheet, dimensional drawing, circuit diagram 2 SR-LC2000 datasheet, dimensional drawing, circuit diagram 4 SR-LC3000 datasheet, dimensional drawing, circuit diagram 7 SR-DMD datasheet, dimensional drawing, circuit diagram 10 SR-DMA datasheet, dimensional drawing, circuit diagram 14 Order code 20 Control SR-DCG 22 Control SR-AC Contact 27

3 1 S+R S+R automation systems GmbH Type overview SR-LC1600 Maximum load: N Maximum speed: 11 mm/s Maximum stroke: 400 mm Low weight and extremely quiet operation Electronic limit switches and overload protection Synchronous operation of two lifting columns by a control possible Input voltage: 24 VDC / 230 VAC with controller SR-LC2000 Maximum load: N Maximum speed: 15 mm/s Maximum stroke: 600 mm Very low installation height through telescopic drive Electronic overload protection when operating on a controller Synchronous operation of two lifting columns by a control possible Input voltage: 24 VDC / 230 VAC with controller SR-LC3000 Maximum load: N Maximum speed: 8 mm/s Maximum stroke: 400 mm Very low installation height through telescopic drive Electronic overload protection when operating on a controller Synchronous operation of two lifting columns by a control possible Input voltage: 24 VDC / 230 VAC with controller SR-DMD / SR-DMA Maximum load: N Maximum speed: 15 mm/s Maximum stroke: 609,6 mm Designed for industrial use Trapezoidal or ball screw T-slots along the entire profile Possible input voltages: 12, 24 and 36 VDC / 230 VAC and 400, 50z

4 2 Performance Specifications up to 1600 N, 24 VDC Standard Features and Benefits For medical and ergonomic automation applications Self supporting column in extruded anodized aluminum Low weight and extremily quiet operation High load torque capability Maintenance free Dynamic braking and load holding brake Electronic limit switches and mid-stroke protection General Specifications Screw type trapezoid Internally restrained yes Manual override no Dynamic braking yes Holding brake yes End of stroke protection electronic limit switches Mid stroke protection yes Motor protection no Motor connection cable Certificates CE - flying leads (LX) Options - Cable with connector (NX) - Encoder, cable with connector (NE) Maximum load 1600 [N] Maximum load torque, dynamic / static 200 / 500 [Nm] Speed, at no load / at maximum load 11 / 6,5 [mm/s] Available input voltages 24 [VDC] 200, 250, 300, Stroke lengths 350, 400 [mm] Operating temperature limits 0 bis +40 [ C] Full load duty 20 C 10 [%] Maximum on time 60 [s] Maximum sound level 45 [db] Lead cross section 1,5 [mm²] cable length LX- version NX- and NE- version 900 [mm] 1900 [mm] Protection class IP 44 Compatible controls SR-DCG-154 SR-DCG-254 or operating a single unit, with option NX for synchronous operation of two units, with option NE Performance Diagram V: Speed I: Current F: Load 1: Speed 2:Current

5 3 S: Stroke L: retracted length A1: the mounting screws must not enter deeper than 10 mm. A2: Cable length - Option LX (flying leads) = 900 mm - Option NX und NE (cable with connector) = 1900 mm (Version for use with control SR-DCG) Stroke (S) [mm] Minimum redracted length (L) [mm] Weight of unit [kg] 9,1 9,8 10,5 11,8 12,4 Connect the white (EXT) and brown (COM) leads to extend the lifting column. To retract the lifting column connect the green (RET) and brown (COM) leads. The lifting column will automatically switch off when reaching the ends of stroke or a mid-stroke overload.

6 4 up to 2000 N, 24 VDC Standard Features and Benefits For medical and ergonomic automation applications Self supporting column in extruded anodized aluminum Low weight and quiet operation Smooth operating telescopic lead screw drive High load torque capability Very short retracted length High extension to retraction ratio Maintenance free Integrated end of stroke limit switches Load holding brake EMC recognized for medical applications General Specifications Screw type telescopic lead screw Internally restrained yes Manual override no Dynamic braking No,only with control DCG Holding brake yes End of stroke protection limit switches Mid stroke protection No,only with control DCG Motor protection No,only with control DCG Motor connection 8 pin plug Certificates CE, EMC for medical applications - cable with connector (NX) Options - encoder position feedback, cable with connetor (NE) Performance Specifications Maximum load 2000 [N] Maximum load torque, dynamic / static 150 / 500 [Nm] Speed, at no load / at maximum load 19 / 15 [mm/s] Available input voltages 24 [VDC] Minimum ordering stroke length 200 [mm] Maximun ordering stroke length 600 [mm] Operating temperature limits 0 bis +40 [ C] Full load duty 20 C 15 [%] Maximum on time 60 [s] Lead cross section 1,5 [mm²] cable length 1900 [mm] Protection class IP 44 Compatible controls SR-DCG-180 SR-DCG-280 for operation of a single unit, option NX for synchronous operation of two units, option NE Leistungungsdiagramm V: speed I: Current F: Load 1: Speed 2:Current

7 5 S: Stroke L: retracted length A1: Mounting screws must not enter deeper than 10 mm. The desired stroke (S) will determine the minimum retracted length (L min) and the weight of the unit. Units can be built with a retracted length (L) between the calculated L min value and maximum retracted length. Stroke, retracted length and weight relationship Minimum Maximum Stroke (S) [mm] Retracted length (L) [mm] Min. retracted length (L min) based on stroke (S) [mm] L min = (S + 282) / 2 Weight of unit based on stroke (S) [kg] Weight = 3,4 + L x 0, S x 0,001 Examples of strokes and the resulting minimum retracted length and weight Stroke (S) [mm] L min [mm] Weight [kg] 8,7 9,1 9,7 10,2 10,8 11,3 11,9 12,4 13

8 6 Connect the green lead to positive and red to negative to extend the actuator. Change polarity to retract the actuator. The encoder is supplied with 5-18 VDC on pin 2 and 7 and the two pulse train signals are generated on pin 1 and 5. 6,62 pulses / 1 mm stroke

9 7 Performance Specifications up to 3000 N, 24 VDC Maximum load 3000 [N] Maximum load torque, dynamic / static 400 / 500 [Nm] Speed, at no load / at maximum load 8 / 6 [mm/s] Available input voltages 24 [VDC] Minimum ordering stroke length 200 [mm] Maximun ordering stroke length 400 [mm] Operating temperature limits 0 bis +40 [ C] Full load duty 20 C 10 [%] Maximum on time 60 [s] Lead cross section 1,5 [mm²] cable length 1900 [mm] Protection class IP 44 Compatible controls Standard Features and Benefits For medical and ergonomic automation applications Self supporting column in extruded anodized aluminum Low weight and quiet operation Smooth operating ballscrew drive High load torque capability Short retracted length Load holding brake Maintenance free Integrated end of stroke limit switches General Specifications Screw type ball screw Internally restrained yes Manual override no Dynamic braking No,only with control DCG Holding brake yes End of stroke protection limit switches Mid stroke protection No,only with control DCG Motor protection No,only with control DCG Motor connection 8 pin plug Certificates CE - cable with connector (NX) Options - encoder position feedback, cable with connetor (NE) SR-DCG-180 SR-DCG-280 for operation of a single unit, option NX for synchronous operation of two units, option NE Performance Diagram V: Speed I: Current F: Load 1: Speed 2: Current

10 8 S: Stroke L: retracted length A1: Mounting screws must not enter deeper than 10 mm. The desired stroke (S) will determine the minimum retracted length (L min) and the weight of the unit. Units can be built with a retracted length (L) between the calculated L min value and maximum retracted length. Stroke, retracted length and weight relationship Minimum Maximum Stroke (S) [mm] Retracted length (L) [mm] Min. retracted length (L min) based on stroke (S) [mm] L min = S Weight of unit based on stroke (S) [kg] = 4,065+((0,01774xL)-0,6031)+(S+70)x0,00012) Examples of strokes and the resulting minimum retracted length and weight Stroke (S) [mm] L min [mm] Weight [kg] 9,7 10,9 11,6 12,5 13,5

11 9 Connect the green lead to positive and red to negative to extend the actuator. Change polarity to retract the actuator. The encoder is supplied with 5-18 VDC on pin 2 and 7 and the two pulse train signals are generated on pin 1 and 5. 15,6 pulses / 1 mm stroke

12 S+R S+R automation systems GmbH SR-DMD Performance Specifications 12, 24 and 36 Vdc - load up to 6800 N Standard Features and Benefits Designed for industrial use Rugged, robust and strong Self supporting column in extruded anodized aluminum Acme or ball screw drive High load torque capability Overload clutch for mid and end of stroke protection T-slot grooves along the entire profile Maintenance free General Specifications Screw type Internally restrained Manual override Dynamic braking Holding brake acme screw models ball screw models acme or ball yes no no no, self-locking yes End of stroke protection overload clutch Mid stroke protection Motor protection Motor connection Motor connector Certifi cates Options overload clutch auto reset thermal switch cable no CE Potentiometer Maximum load dynamic / static [N] SRDMD -05A5 (acme screw) 1100 / SRDMD -10A5 (acme screw) 2250 / SRDMD -20A5 (acme screw) 2250 / SRDMD -05B5 (ball screw) 2250 / SRDMD -10B5 (ball screw) 4500 / SRDMD -20B5 (ball screw) 4500 / SRDMD -21B5 (ball screw) 6800 / Maximum load torque dynamic / static [Nm] acme screw models 565 / 565 ball screw models 710 / 710 speed no load/ max. load [mm/s] SRDMD -05A5 (acme screw) 54 / 32 SRDMD -10A5 (acme screw) 30 / 18 SRDMD -20A5 (acme screw) 15 / 12 SRDMD -05B5 (ball screw) 61 / 37 SRDMD -10B5 (ball screw) 30 / 19 SRDMD -20B5 (ball screw) 15 / 12 SRDMD -21B5 (ball screw) 15 / 11 Available input voltages 12, 24, 36 [VDC] Standard stroke lengths 4, 6, 8, 10, 12, 14, 16, 18, 20, 24 [in] Operating temperature limits -25 bis +65 [ C] Full load duty 25 C 25 % Restraining torque 0 [Nm] Lead cross section 2,5 [mm²] Cable length 2000 [mm] Protection class IP 65 Compatible controls SR-AC-063 for operation of a single unit 10

13 11 S+R S+R automation systems GmbH SR-DMD Performance Diagrams V: Speed I:Current F: Load 1: speed SRDMD -05A5 - Chart 1 2: speed SRDMD -05B5 - Chart 1 3: speed SRDMD -10A5 - Chart 1 4: speed SRDMD -10B5 - Chart 2 5: speed SRDMD -20A5 - Chart 2 6: speed SRDMD -20B5 - Chart 2 7: speed SRDMD -21B5 - Chart 2 8: current SRDMD12-05A5 - Chart 1 9: current SRDMD24-05A5 - Chart 1 10: current SRDMD12-05B5 - Chart 1 11: current SRDMD24-05B5 - Chart 1 12: current SRDMD12-10A5 - Chart 1 13: current SRDMD24-10A5 - Chart 1 14: current SRDMD12-10B5 - Chart 2 15: current SRDMD24-10B5 - Chart 2 16: current SRDMD12-20A5 - Chart 2 17: current SRDMD24-20A5 - Chart 2 18: current SRDMD12-20B5 - Chart 2 19: current SRDMD24-20B5 - Chart 2 20: current SRDMD12-21B5 - Chart 2 21: current SRDMD24-21B5 - Chart 2

14 12 S+R S+R automation systems GmbH SR-DMD Dimensions L: retracted length S: Stroke Stroke (S) Retracted length (L), acme screw models Retracted length (L), ball screw models [Zoll (mm)] 4 (101,6) 6 (152,4) 8 (203,2) 10 (254,0) 12 (304,8) 14 (355,6) 16 (406,4 18 (457,2) 20 (508,0) 24 (609,6) [mm] 329,6 380,4 431,2 482,0 532,8 633,6 684,4 735,2 786,0 887,6 [mm] 369,6 420,4 471,2 522,0 572,8 673,6 724,4 775,2 826,0 927,6 Add on length for potentiometer* [mm] 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 Weight, acme screw models [kg] 18,7 20,2 21,6 23,1 24,6 27,3 28,7 30,2 31,7 34,6 Weight, ball screw models Add on weight for potentiometer* [kg] 20,4 21,9 23,4 24,8 26,3 29,0 30,4 31,9 33,4 36,3 [kg] 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 * Potentiometer optional

15 S+R S+R automation systems GmbH SR-DMD off center load capacity Fmax: maximum load operated La.: length of lever arm 1: acme screw models 2: ball screw models SR-DMD Wiring Diagram Hubsäule Connect the brown lead to positive and blue to negative to extend the lifting column. Change polarity to retract the lifting column. 13

16 14 Performance Specifications 230 and 400 Vac - load up to 6800 N Standard Features and Benefits Designed for industrial use Rugged, robust and strong Self supporting column in extruded anodized aluminum Acme or ball screw drive High load torque capability Overload clutch for mid and end of stroke protection T-slot grooves along the entire profile Maintenance free General Specifications Screw type Internally restrained Manual override Dynamic braking Holding brake acme screw models ball screw models acme or ball yes no no no, self-locking yes End of stroke protection overload clutch Mid stroke protection Motor protection Motor connection Motor connector Certificates Options overload clutch auto reset thermal switch cable no CE potentiometer maximum load dynamic / static [N] SRDMA 22-05A5 (acme screw) * 1100 / SRDMA -10A5 (acme screw) 2250 / SRDMA -20A5 (acme screw) 2250 / SRDMA -05B5 (ball screw) 2250 / SRDMA -10B5 (ball screw) 4500 / SRDMA -20B5 (ball screw) 4500 / SRDMA -21B5 (ball screw) 6800 / Maximum load torque dynamic / static [Nm] acme screw models 565 / 565 ball screw models 710 / 710 speed no load / max. load [mm/s] SRDMA 22-05A5 (acme screw) * 54 / 32 SRDMA -10A5 (acme screw) 30 / 18 SRDMA -20A5 (acme screw) 15 / 12 SRDMA -05B5 (ball screw) 61 / 37 SRDMA -10B5 (ball screw) 30 / 19 SRDMA -20B5 (ball screw) 15 / 12 SRDMA -21B5 (ball screw) 15 / 11 Input frequency 1 x 230 VAC 3 x 400 VAC Standard stroke lengths Operating temperature limits [Hz] 50 / , 6, 8, 10, 12, 14, 16, 18, 20, 24 [in] -25 bis +65 [ C] Full load duty 25 C 25 % Restraining torque Lead cross section Cable length 0 [Nm] 2,5 [mm²] 2000 [mm] Protection class IP 45 * Not possible with 400 Vac input voltage. ** 10 μf capacitor required to run the actuator

17 15 S+R S+R automation systems GmbH SR-DMA Performance Diagrams V: speed I: current F: load 1: speed SRDMA 22-05A5 - chart 1 2: speed SRDMA -05B5 - chart 1 3: speed SRDMA -10A5 - chart 1 4: speed SRDMA -10B5 - chart 2 5: speed SRDMA -20A5 - chart 1 6: speed SRDMA -20B5 - chart 2 7: speed SRDMA -21B5 - chart 2 8: current SRDMA22-05A5 - chart 1 9: current SRDMA22-05B5 and SRDMA22-10A5 - chart 1 10: current SRDMA42-05B5 - chart 1 11: current SRDMA42-10A5 - chart 1 12: current SRDMA22-10B5 and SRDMA22-20B5 - chart 2 13: current SRDMA42-10B5 - chart 2 14: current SRDMA22-20A5 - chart 1 15: current SRDMA42-20A5 - chart 1 16: current SRDMA42-20B5 - chart 2 17: current SRDMA22-21B5 - chart 2 18: current SRDMA42-21B5 - chart 2

18 16 S+R S+R automation systems GmbH SR-DMA Dimensions L: retracted length S: Stroke Stroke (S) Retracted length (L), acme screw models Retracted length (L), ball screw models Add on length for potentiometer* Weight, acme screw models Weight, ball screw models Add on weight for potentiometer* [Zoll (mm)] 4 (101,6) 6 (152,4) 8 (203,2) 10 (254,0) 12 (304,8) 14 (355,6) 16 (406,4 18 (457,2) 20 (508,0) 24 (609,6) [mm] 329,6 380,4 431,2 482,0 532,8 633,6 684,4 735,2 786,0 887,6 [mm] 369,6 420,4 471,2 522,0 572,8 673,6 724,4 775,2 826,0 927,6 [mm] 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 55,0 [kg] 20,9 22,4 23,8 25,3 26,8 29,5 30,9 32,4 33,9 36,8 [kg] 22,6 24,1 25,6 27,0 28,5 31,2 32,6 34,1 35,6 38,6 [kg] 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 * Potentiometer is optional

19 S+R S+R automation systems GmbH SR-DMA Off center load capacity Fmax: maximum load operated La.: length of lever arm 1: acme screw models 2: ball screw models SR-DMA Wiring Diagram 1x input voltage 230V - 50Hz _ without brake (acme thread) capacitor 10 μf Lifting column Leads can be either color or number marked. Connect black (1) lead to L1 and white (3) lead to N (neutral) to retract the lifting column. Change L1 from lead black (1) to lead red (2) to extend the lifting column. 17

20 18 S+R S+R automation systems GmbH SR-DMA Wiring Diagram 1x input voltage 230V - 50Hz _ with brake (ball screw) capacitor 10 μf Lifting column Leads can be either color or number marked. Connect black (1) lead to L1 and white (3) lead to N (neutral) to retract the lifting column. Change L1 from lead black (1) to lead red (2) to extend the lifting column. Release the brake by connecting orange (4) lead lead to L1. 3x input voltage 400V - 50Hz _ without brake (acme thread) Lifting Hubsäule column Leads can be either color or number marked. Connect white (1) lead to L1, red (2) lead to L2 and black (3) lead to L3 to extend the lifting column. Change the places of white (2) lead and black (3) to to retract the lifting column.

21 19 S+R S+R automation systems GmbH SR-DMA Wiring Diagram 3x input voltage 400V - 50Hz _ with brake (ball screw) Lifting Hubsäule column Leads can be either color or number marked. Connect white (1) lead to L1, red (2) lead to L2 and black (3) lead to L3 to extend the lifting column. Change the places of white (2) lead and black (3) to to retract the lifting column. Release the brake by connecting orange (4) lead to N (neutral).

22 20 Beispiel SR-LC1600 N NX 1: Model _ SR-LC1600 5: Connection cable and encoder options 2: Typ e_ N = standard LX = cable (L=900mm), flying leads, 3: Supply voltage _ 24 = 24VDC electronic limit switches 4: Stroke and retracted length NE = cable (L=1900mm), Molex-connector, = 200 und 380 mm encoder feedback (1) = 250 und 430 mm NX = cable (L=1900mm), Molex-connector, = 300 und 480 mm no encoder feedback (2) = 350 und 581 mm (1) Encoders are used when synchronizing multiple units. This option may only be used in conjunction with the DCG-254 control. (2) This option may only be used in conjuction with the DCG-154 control. Beispiel SR-LC3000 N NX 1: Model _ SR-LC2000 / LC3000 5: Anschlusskabel und Geberoptionen 2: Type _ N = standard NE = cable (L=1900mm), Molex-connector, 3: Supply voltage _ 24 = 24VDC encoder feedback (2) 4: Stroke and retracted length NX = cable (L=1900mm), Molex-connector, = 400 und 530 mm (1) no encoder feedback (3) (1) This is just an example, see section Ordering Stroke, Retracted Length and Weight on the dimension sheet, directions on how to calculate this number. (2) Encoders are used when syncronizing multiple units. This option should only be used in with the control SR-DCG-280. (3) This option should only be used with the controller SR-DCG-180.

23 21 Beispiel SR-DMD 24 10B5-16 PO 1. Model and input voltage - 12 = 12 VDC - 24 = 24 VDC 2. Dynamic load capacity, screw typ and maximum speed 05A5 = 1100 N, acme 54 mm/s 10A5 = 2250 N, acme, 30 mm/s 20A5 = 2250 N, acme, 15 mm/s 05B5 = 2250 N, ball, 61 mm/s 10B5 = 4500 N, ball, 30 mm/s 20B5 = 4500 N, ball, 15 mm/s 21B5 = 6800 N, ball, 15 mm/s 3. Stroke 04 = 4 Zoll (101,6 mm) 06 = 6 Zoll (152,4 mm) 08 = 8 Zoll (203,2 mm) 10 = 10 Zoll (254,0 mm) 12 = 12 Zoll (304,8 mm) 14 = 14 Zoll (355,6 mm) 16 = 16 Zoll (406,4 mm) 18 = 18 Zoll (457,2 mm) 20 = 20 Zoll (508,0 mm) 24 = 24 Zoll (609,6 mm) 4. Optionen PO = potentiometer X = no options Beispiel SR-DMA 22 20A5-06 PO 1. Model and input voltage - 22 = 1x 230 VAC - 42 = 3x 400 VAC 2. Dynamic load capacity, screw typ and maximum speed 05A5 = 1100 N, acme 54 mm/s (1) 10A5 = 2250 N, acme, 30 mm/s 20A5 = 2250 N, acme, 15 mm/s 05B5 = 2250 N, ball, 61 mm/s 10B5 = 4500 N, ball, 30 mm/s 20B5 = 4500 N, ball, 15 mm/s 21B5 = 6800 N, ball, 15 mm/s 3. Stroke 04 = 4 Zoll (101,6 mm) 06 = 6 Zoll (152,4 mm) 08 = 8 Zoll (203,2 mm) 10 = 10 Zoll (254,0mm) 12 = 12 Zoll (304,8mm) 14 = 14 Zoll (355,6mm) 16 = 16 Zoll (406,4mm) 18 = 18 Zoll (457,2mm) 20 = 20 Zoll (508,0mm) 24 = 24 Zoll (609,6mm) 4. Optionen PO = potentiometer X = no options (1) 05A5 not possible with 400 VAC input voltage.

24 22 suitable for SR-LC1600, SR-LC2000 und SR-LC3000 Controls available für single lifting column, operation or synchronous operation of two lifting columns equipped with encoders Small and light weight control operated via a control pendant (ordered separately) Built in Electronic Limit Switches (ELS) stop the lifting column automatically at end of stroke or mid stroke stall No wiring is necessary to the control as all connections are done through plugs Compatability: DCG-154: Single operation of one SR-LC1600, option NX, no encoder. DCG-180: Single operation of one SR-LC2000 or LC3000, option NX, no encoder. DCG-254: Syncronous operation of two SR-LC1600, option NE, encoder feedback. DCG-280: Syncronous operation of two SR-LC2000 or LC300, option NE, encoder feedback. SR-DCG-154 SR-DCG-180 SR-DCG-254 SR-DCG-280 Input voltage [VAC] Input frequency [Hz] 50 / 60 Output voltage [VDC] 24 Output current, max. [A] 4,8 8 2x 4,8 2x 8 Operating temperature limits [ C] +5 bis +45 Max. duty 25 C [%] 10 (1) Maximum on time [s] Weight of control [kg] 0,6 1,9 Protection class double insulated Electronic limit switches yes yes (2) Certificates CE Part number DCG24-1U-154 DCG24-1M-154 DCG24-1U-180 DCG24-1M-180 DCG24-2U-254 DCG24-2M-254 DCG24-2U-280 DCG24-2M-280 (1) Control will shut off if duty cycle is exceeded and automatically reset when cooled off. (2) DCG-254 and DCG-280 monitors the encoder pulses and not the motor currents. If the pulses arrives too slowly or not at all it will stop the motion of both lifting columns.

25 23 Handy and light weight control pendant 1.2 meter long spiral cord cable Connects to the DCG control with a plug Weight [kg] 0,4 Cable length [mm] 1200 Certificates CE Part number SR-DCG14-1H This cable connects with its plug to the control pendant input on DCG Lead cross section [mm²] 7 x 0,14 Cable length [mm] 2450 Part number D

26 S+R S+R automation systems GmbH Control SR-AC-063 suitable for SR-DMD Rugged and robust control designed to operate under the hardest conditions Auto shut off function if the current or duty cycle limits of the control is exceeded Versions for DC or AC supply voltage Ausführungen für DC- oder AC-Versorgungsspannung Versions with or without limit switch inputs Versions with or without control pendant Note: Sometimes the control can manage higher current and/or duty cycle than the lifting column and sometimes it is the other way around. Always make sure that both the control and the lifting column can manage the current and duty cycle that the application require. Input voltage VDC 50 Hz [V] SR-AC-063B SR-AC-063BC SR-AC-063C Output voltage [VDC] Output current, max VDC Max. duty 25 C [%] 10 Weight of control [kg] 0,4 3 Protection class IP65 IP54 Limit switch inputs no yes no yes no yes Control pendant included nein ja Certificates Part number DC24-1B DCA24-1B DC24-1BC CE DCA24-1BC DC24-1C DCA24-1C 24

27 25 S+R S+R automation systems GmbH SR-AC-063 Wiring Diagrams and Dimensions SR-AC-063B SR-AC-063BC * On models without stop retract and stop extend inputs these terminals are not available.

28 26 S+R S+R automation systems GmbH SR-AC-063C * On models without stop retract and stop extend inputs these terminals are not available.

29 S + R automation systems GmbH Elisabethenstraße 2 D Homberg/Ohm Tel: +49 (0) Fax: +49 (0) vertrieb@sr-gmbh.de 27