D. S. HULL COMPANY, INC

Transcription

1 Faria Marine Instruments Coral Series Perimeter-lighted black dial with stylish blue and white graphics, black aluminum bezel with burnished leading edge, contoured white pointer and flat glass lens. Faria Instruments Engine & Controls Order No Mfg No Type Diameter Application List Tachometer RPM Gas inboard & I/O engines $ Tachometer RPM universal for all outboard $ Tachometer/Hourmeter RPM gas inboard $ Tachometer/Hourmeter RPM universal outboard $ Speedometer 4 Speedo, 55 MPH $ Speedometer Mechanical 4 Speedo, 80 MPH $ Fuel Level Gauge 2 E-1/2/F $ Oil Pressure Gauge 2 Oil Press Gauge, 80 PS $ Water Pressure Kit 2 30 PSI $ Water Temperature F $ Voltmeter vdc $ Hourmeter 2 10,000 hrs vdc $ Trim Gauge 2 OMC outboard $ Trim Gauge 2 Mercury, Mariner, Mercruiser, Volvo DP, & Yamaha 01 & newer $41.47 Euro Series Perimeter-lighted black dial with bold white graphics, black aluminum bezel, contoured white pointer and flat glass lens. Order No Mfg No Type Diameter Application List Tachometer RPM gas inboard & I/O engines $ Tachometer RPM universal for all outboard $ Tachometer/Hourmeter RPM gas inboard $ Tachometer/Hourmeter RPM universal outboard $ Speedometer 4 Speedo, 55 MPH $ Speedometer Mechanical 4 Speedo, 80 MPH $ Fuel Level Gauge 2 E-1/2/F $ Oil Pressure Gauge 2 Oil Press Gauge, 80 PSI $ Water Pressure Kit 2 30 PSI $ Water Temperature F $ Voltmeter vdc $ Hourmeter 2 10,000 hrs VDC $ Trim Gauge 2 OMC outboard $ Trim Gauge 2 Mercury, Mariner, Mercruiser, Volvo DP, & Yamaha 01 & newer $ Depth Sounder Gauge 2 with Transom Mounted Transducer $ Prices and specifications subject to change without notice.

2 Chesapeake White Stainless Steel Series Perimeter-lighted white dial with stylish blue and black graphics, polished stainless steel bezel, contoured black pointer and domed glass lens. Order No Mfg No Type Diameter Application List Tachometer RPM gas inboard & I/O engines $ Tachometer RPM universal for all outboard $ Tachometer/Hourmeter RPM gas inboard $ Tachometer/Hourmeter RPM universal outboard $ Speedometer 4 Speedo, 55 MPH $ Speedometer Mechanical 4 Speedo, 80 MPH $ Fuel Level Gauge 2 E-1/2/F $ Oil Pressure Gauge 2 Oil Press Gauge, 80 PSI $ Water Pressure Kit 2 30 PS $ Water Temperature F $ Voltmeter vdc $ Hourmeter 2 10,000 hrs vdc $ Trim Gauge 2 OMC outboard $ Trim Gauge 2 Mercury, Mariner, Mercruiser, Volvo DP & Yamaha 01 & newer $ Depth Sounder W/Temp 2 with Transom Mounted Transducer $ Chesapeake Black Stainless Steel Series Perimeter-lighted black dial with stylish blue and black graphics, polished stainless steel bezel, contoured black pointer and domed glass lens. Order No Mfg No Type Diameter Application List Tachometer RPM gas inboard & I/O engines $ Tachometer RPM universal for all outboard $ Tachometer/Hourmeter RPM gas inboard $ Tachometer/Hourmeter RPM universal outboard $ Speedometer 4 Speedo, 55 MPH $ Speedometer Mechanical 4 Speedo, 80 MPH $ Fuel Level Gauge 2 E-1/2/F $ Oil Pressure Gauge 2 Oil Press Gauge, 80 PSI $ Water Pressure Kit 2 30 PS $ Water Temperature F $ Voltmeter vdc $ Hourmeter 2 10,000 hrs vdc $ Trim Gauge 2 OMC outboard $ Trim Gauge 2 Mercury, Mariner, Mercruiser, Volvo DP & Yamaha 01 & newer $ Depth Sounder Gauge 2 with Transom Mounted Transducer $ Depth Sounder W/Temp 2 with Transom Mounted Transducer $ Faria Instruments Engine & Conmtrols Prices and specifications subject to change without notice. 475

3 Kronos Series Perimeter lighted white dial with stylish black graphics, polished stainless steel bezel, white pointer and domed glass lens. Faria Instruments Order No Mfg No Type Diameter Application List RPM Tachometer RPM gas inboard & I/O engines $ RPM Tachometer RPM universal for all outboards $ Speedometer 4 Speedo, 60 MPH $ Fuel Level Gauge 2 E-1/2-F $ Oil Pressure Gauge 2 80 psi $ Water Pressure Gauge 2 30 psi $ Water Temperature Gauge $ Trim Gauge 2 Mercury/Yamaha/Volvo $ Trim Gauge 2 Johnson/Evinrude/Suzuki $ Hour Meter V $ Voltmeter V $54.76 Engine & Controls Dress White Series Perimeter-lighted white dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens. Order No Mfg No Type Diameter Application List RPM Tachometer RPM gas inboard & I/O engines $ RPM Tachometer RPM universal for all outboards $ Speedometer 4 Speedo, 50 MPH $ Speedometer 4 Speedo, 80 MPH $ Fuel Level Gauge 2 E-1/2-F $ Oil Pressure Gauge 2 80 psi $ Water Pressure Gauge 2 30 psi $ Water Temperature Gauge $ Hour Meter V $ Prices and specifications subject to change without notice.

4 Faria Packaged Guage Sets The Outboard Set includes Speedometer and Pitot Tachometer Fuel gauge Voltmeter Black Euro Series Dress White Series White Chesapeake Series Black Chesapeake Series w/ss Bezels The Inboard Set includes Speedometer and Pitot Tachometer Fuel gauge Voltmeter Water Temp gauge Oil Pressure gauge. Order No Mfg No Item Type List KT9799 Black Euro Series 6 Gauge I/B $ KT9796 Black Euro Series 4 Gauge O/B $ KT9797 Dress White Series 6 Gauge I/B $ KT9794 Dress White Series 4 Gauge O/B $ KTF001 White Chesapeake Series 6 Gauge I/B $ KTF002 White Chesapeake Series 4 Gauge O/B $ KTF004 Black Chesapeake Series SS Bezels 4 Gauge O/B $ Temperture Sender Oil Pressure Sender Plastic Pitot Tube Fuel Level Sender Wedge Base Lamp Socket 161 Light Bulb Faria Instruments and Sending Units Faria Senders & Parts DS indicates Dual Station. 124 Light Bulb 658 Light Bulb 194 Light Bulb Red Light Bulb Boot Green Light Bulb Boot /8 Temperture Sender $ /4 Temperature Sender $ /8 Temperature Sender $ /2 Temperature Sender $ /8 Dual Station Temperature Sender $ psi Oil Pressure Sender $ psi Dual Station Oil Pressure Sender $ Fuel Level Sender $ Fuel Level Sender $ Dual Station Fuel Level Sender $ Wedge Base Lamp Socket $ Light Bulb for Electric Gauges (Not for use with white dials) $ Light Bulb for Mechanical Gauges (All styles) $ Light Bulb for Electric Gauges (For white dials) $ Light Bulb for Electric Gauges (For Tachometers & Speedometers) (For white dials) $ Red Light Bulb Boot (4 pack) (For all series) $ Blue Light Bulb Boot (4 pack) (For all series) $ Green Light Bulb Boot (4 pack) (For all series) $ Plastic Pitot Tube $14.89 Prices and specifications subject to change without notice. 477 Engine & Conmtrols

5 Jack Plates Transom Wedges Skegs Motor Brackets Hydrofoils Engine & Controls TH Marine Hi-Jacker Fixed Jack Plate Inexpensive short transom fix. Solid 3/8 aluminum extrusion. 3-Engine mount holes - 2 transom holes. Total vertical of 5-1/2-4 setback. Maximum HP JP-4FA-DP $ TH Marine 5 Transom Wedges Fits all standard 4-bolt patterns. Full contact between engine and transom. 2-1/4 W /4 L - 1-1/16 to 3/16 thinckness TW-2-DP $60.84 TH Marine Transom Trim Control The Transom Trim Control provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18 pigtail wire and installation instructions TTC-1-DP $42.00 TH Marine Replacement Skegs TH Marine Transom Support Plate Made of high quality cast aluminum. This plate distributes the stress of the motor mounting bolts to protect the transom. A generic plate with no lettering is standard TSP-1-DP $33.78 Order No Mfg No Type A B C D List RS-1-DP V6 OMC - Yamaha 5-1/ /4 9 $ RS-4-DP V6 Merc & Stern Drives Garelick Stainless Steel Auxilliary Motor Brackets Easy to lift and lower - stainless steel springs hold counterbalance motor weight. Transom mount locks and holds motor up or swings down for propulsion. Built in transom angle adjustment allows optimum motor performance. Fits all style motors - extra wide. Black poly mounting board for newer, wider style motor locking clamps. 4 positions locking height adjustment. Stainless mounting hardware and instructions included. Made of tough 304 stainless steel. Rated for motors from 7-1/2 to 20 h.p. Mounting board dimensions: 11-1/2 x 10-3/4 x 2 Mounting bracket dimensions: 7-5/8 x 7-7/8. Order No Mfg No Only $ /2 6-1/2 9-1/4 10-1/2 $34.35 Atlantic Watercraft SST Hydrofoils PLEASURE BOATS Get on plane and stay on plane without moving passengers and equipment around to balance out the weight. The fuel savings you ll experience will be unbelievable. You won t go crazy adjusting engine tilt and trim tabs every time you change your power setting. Set your power level where you like it, and water conditions necessitate, not where the boat demands. THUNDER BOATS Cat, Deep Vee, Tunnel Hull, 15 ft. to 40ft. craft experience hole shots that are quicker than you ever imagined possible. Boats using ENGINE BRACKETS will run level at lower power settings, steering response is quickened and cavitation is virtually eliminated in high speed turns. FISHING BOATS Lakes, rivers, or 100 miles offshore you ll enjoy a level, more stable boat trolling speeds and never lose sight of the horizon. Even with over sized fuel tanks, bait wells, ice and all your buddies, the Atlantic Watercraft Hydrofoil SST will stop your boat from looking like it s heading for the moon. Bass boats will come out of the hole faster and perfectly level. Order No Mfg No Color List BLACKSST Black $ GRAYSST Gray $ WHITESST White $ BLUESST Blue $29.99 Atlantic Watercraft Ultra Fin Hydrofoils The leading edge in hydrofoil technology! The exclusive integral torque control system adjusts to provide the ultimate in precise and effortless steering. Saves fuel. Stops bow rise. Cuts planing time. Gives a smoother ride. Reduces cavitation. Unbreakable and easily installed. Fits all outboards and sterndrives (Volvo 280 and 290 Require special mounting hardware). Black BLACKAWFX $ Prices and specifications subject to change without notice.

6 12732-A Hydraulic Cylinder A $ Hydraulic Cylinder Parts Insta-Trim Boat Leveler Trim Tab Kits Insta-trim Boat Levelers provide a safe, comfortable, economical ride every time you leave the dock. You can correct a bow high or list condition with a simple flick of the rocker switch. Trim can be corrected on any shape hull flat, round or deep V. Insta-Trim Boat Levelers are made of 12 gauge 304 stainless steel and guaranteed against electrolysis. Kit includes a motor with a thermo-overload, a pump with a built-in bypass and epoxy sealed solenoids for locking the tabs in position. Also included is a protective cover with a transparent reservoir, hydraulic lines, cylinders, brackets, rocker type switches, wiring, stainless steel mounting hardware, and two stainless steel tabs with hinges. The tab depths are available in 8 and 11 inch chords and the lengths vary depending upon the length of the boat. Dual cylinders are standard for 46 to 72 inch tabs. 12 VDC. (24 & 32 VDC available on special order.) Complete Systems (* Indicates Stocked item) Order No Mfg No Size List * N x 9 $ * N x 11 $ S/O N x 8 Call for Price S/O N x 11 Call for Price S/O N x 11 Call for Price S/O N x 8 Call for Price N x 8 $ S/O N x 8 Call for Price N x 8 $ N x 8 $ N x 8 $ S/O N x 8 Call for Price N x 8 $ A Nylon Cylinder Bracket $ Cylinder Pins $ A White Reservoir Tank $ Outside Housing and Reservoir $ Reservoir Plug $ Hose Trim w/screws $ Half Pint Oil $ Funnel for Biodegradable Oil $ Roll Hydraulic Hose; Sold by the ft. $ Hose Clamp $2.25 Solenoid Order No Mfg No Color Voltage List V White 12 VDC $ V White 24 VDC $ V White 32 VDC $ V Green 12 VDC $ V Green 24 VDC $ V Green 32 VDC $73.95 Solenoid Hose Fittings $10.00 Motor/Pump Assemblies V $ Motor Only - 12 Volt $ A Insta Trim Boat Leveler Trim Tabs Engine & Conmtrols Wire Harness $31.95 Switches Order No Mfg No Item Color List Replacement Trim Planes Only Complete Set Black $ Switch Plate Black $ A Switch Plate for Cover Black $ x8 $ Waterproof Switch Set Prices and specifications subject to change without notice. Black w/gray Buttons $

7 Bennett Trim Tabs Engine & Controls Bennett Marine Trim Tab Kits Bennett Trim Tabs are two independent, stainless steel, adjustable after-planes attached to the bottom edge of the transom. They are designed to improve lift and stability, greatly enhancing the boating experience. When the helm control is pressed, the trim tabs move into position. Water force on the trim tab surface creates upward pressure, raising the stern and lowering the bow. Made of high quality 304 stainless steel. They remain strong and rigid, even in themost challenging situations. Acutators are strong but flexible nylon/fiberglass hydraulic cylinders that push tabs into position. They allow for more variations in stroke than any trim tab system on the market; fittimg almost any space a boat builder can design. Fluid flows through a concealed hole in the upper hinge at the top of the actuabor, thus eliminating external hoses subject to damage. Benefits include: Increased speed. Reduced pounding. Corrects for listing. Eliminates porpoising. Offsets prop torque. Reduces fuel consumption. Reduces engine laboring. Eliminates squatting. Improves visibility. Reduces wake. Improves handling. Reduces hull stress. Kits include: Two trim plane assemblies, two actuators, one Euro-style Rocker Switch Control, a hydraulic power unit and all necessary wiring, tubing and hardware. Order No Mfg No Boat Length E E Engine Configuration Single I/O, Single O/B or I/B Single I/O, Single O/B or I/B Trim Tab Size List 12 x 9 $ x 9 $ E Single I/O or O/B 24 x 9 $ E Limited Transom Space or Extra Lift 12 x 12 $ E Twin I/O or Twin O/B 18 x 12 $ E Twin I/O or Twin O/B 24 x 12 $ Bennett Marine SLT Self-Leveling Tabs for Small Boats Bring the durability of Bennett trim tabs systems with a simple, quick and easy installation. There is nothing to do inside the boat - only the mounting of two actuators and two tabs at the transom. This is an affordable solution for small boats from SLT uses some of the same high-quality, proven materials and the durable design used in Bennett trim tab systems for over 50 years. Kits include: Two 14-gauge stainless steel trim tab assemblies with Bennett s exclusive interlocking hinge. Two strong and fllexible composite actuators. All stainless steel hardware - no plastic. Bennett no-hassle 5-year warranty on all components. With the SLT, you can get on plane quickly, improve your hole shot, reduce engine laboring, improve fuel efficiency and eliminate porpoising. The SLT reacts instantly to boat speed and water pressure by adding trim when it s needed. You get a better ride with the SLT does all the work. These items are not stocked and require 3-5 days to be recieved from the manufacturer. Order No Mfg No Size List SLT6 6 x 8 Tabs $ SLT10 10 x 10 Tabs $ Bennett Sport Tabs Bennett s M80 and M120 Sport Tabs are ideal for trailered boats in the 17-foot to 23-foot range. Their unique Batwing design provides 30 percent more lift than conventional trim tabs and their space-saving design ensures easy installation on virtually any transom. Trim tab kits include two stainless steel trim tabs, two actuators, a hydraulic power unit, all necessary wiring, tubing, hardware and installation video. Includes Euro-Style Rocker Switch Control. These items are not stocked and require 3-5 days to be recieved from the manufacturer. Order No Mfg No Size Description List M80 8 X 10 System Only $ M X 12 System Only $ M80EIC 8 X 10 With Indicator $ M120EIC 10 X 12 With Indicator $ Bennett Sport Tabs Parts A1200SRC Small Actuator Assembly with Rivet Clearance $ Prices and specifications subject to change without notice.

8 Bennett Marine Tab Position Indicator Attractive, compact, water resistant and easy to install. The TPI helm display accurately shows deflection percentage of each trim tab, and the LED brightness is adjustable for any lighting condition. Works with all Bennett Trim Tabs. TPA129 AND TPA1212 A1103 A1114 A1101A TP12000 $ Parts & components V351HPU1 and V351HPU2 VP1138 VP1135G VP1135R CC3003-P CC3003-S Bennett Marine Electronic Indicator Control Replacement Port Actuator Hinge with Coil Replacement Starboard Actuator Hinge with Coil Bennett Marine Auto Tab Control ATC interacts directly with trim tab system to automatically monitor boat s position and maintain the perfect cruising attitude. Calculating more than a thousand attitude readings per second, the ATC adjusts your trim tabs to changes in vessel speed, sea conditions and shifting weight. Saves money on fuel. Easy to install - just plug and play. No more guesswork - trims boat better than you can. Most comfortable ride possible AC3000 $ EIC5000 $ $36.75 $36.75 Three features, combined into one sophisticated control - the popular Bennett rocker switch control, trim tab indicator and the Auto Tab Retractor. Water resistant, highly accurate and features variable intensity LEDs for night or day. Features a relay module mounted near the transom, which simplifies installation by reducing the number of wires to run to the helm. Bennett Marine Parts and Components TPA x 9 S/S Trim Plane $ TPA x 12 S/S Trim Plane $ A1103 Upper Hinge $ A1114 Plastic Lower Hinge & Pin $ A1101A Actuator Assembly $ V351H- PU1 V351H- PU2 12V Hydraulic Power Unit $ V Hydraulic Power Unit $ VP1138 Lexan Hydraulic Power Unit Cover $ H1179 Bracket for Hydraulic Power Unit $ VP1135G 12V Green Solenoid Valve $ VP1135R 12V Red Solenoid Valve $ T1125 H1173 ES2000 T1127 VP1135G- 24V VP1135R- 24V 24V Green Solenoid Valve $ V Red Solenoid Valve $ WH Wiring Harness $ T Trim Tab Tubing $ H1173 Tube Bending Clip $ T1127 Nylon Tubing Nut w/ferrule $ ES2000 Rocker Switch Control $ H1170A Actuator Hardware Pack $31.00 Bennett Trim Tabs Engine & Conmtrols H1170B 2nd Actuator Pack for Dual Cylinder Tabs $31.00 Parts & components EIC901P EIC901S Electronic Indicator control port side upper hinge w/ 10 sensor wire Electronic Indicator control starboard side upper hinge w/ 10 sensor wire $42.00 $42.00 Metal Distributors Zinc Kit for Bennett Trim Tabs Kit consists of (2) anodes and (4) 1/4 x 1-1/4 Pan Head Bolts BNT1 $13.68 Prices and specifications subject to change without notice. 481

9 Teleflex Engine Controls Engine & Controls Teleflex DC Control for Throttle, Choke or Fuel Shut Down Control is recommended for throttle, choke, air or fuel shutdown, as well as governor or valve control. The DC Control can be mounted flush on the dashboard or the side of the wheel box. Mounting with the stainless steel angle bracket is optional. Designed to operate with Teleflex 3300 cables. Equivalent cables of other manufacturers may also be used $ Teleflex 3300 Control Cables The most widely used cable type in the world. It is an economical workhorse cable. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/Evinrude, and OMC Sterndrive. 3 travel, SAE threads, 8 minimum bend radius. Order No Mfg No Length List $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Teleflex SL-3 Controls Modern styling, dual action, top and side mount controls. Black satin finish available in single or twin engine versions, with or without trim and/or tilt switches. Suits 33C, OMC and Merc cables. Dual action (throttle and shift in one lever). Start in gear protection standard. Push button for neutral engine warm up. Use 3300 series type cables. Adjustable throttle damper. Available with or without trim and/or tilt. Firm yet effortless shift and throttle motion. These controls are available on a special order basis only. Order no. Mfg. no. Model Features List Single Top Mount With Trim Switch $ Single Side Mount Standard $ Teleflex S Control Twin single function levers. Highly polished corrosion resistant chrome plated brass covers. Optional neutral safety switch to prevent starting in gear. Optional gear detent kit (if used in dual stations use on main operating station only). Designed to operate with Teleflex 3300, 33-C Supreme or 43-C cables. Equivalent cables of other manufacture may also be used CH5210P Single $ CH5200P Twin Spare Parts Red Knob $ Black Knob $21.24 Teleflex MT-3 Controls World s most popular classic design, dual action, top mount controls. Dual action (throttle and shift in one lever) Sturdy control provides one-handed positive engine control Neutral warm-up is done by pulling out the hand levers in the neutral position Built-in friction drag helps reduce slippage and throttle creep while underway Includes hardware for 3300/33C control cables Order no. Mfg. no. Model List Single $ Twin $ Prices and specifications subject to change without notice.

10 Shims Complete Kits Order No Mfg No Fits List Johnson/Evinrude 33C Adapter $ CA27319P Mercury Outboard Kit (1979 to date) $31.84 Clevis Order No Mfg No Type A B C D List Ball Joint 3300; 10-32; 1/4 pin 4300; 1/4-20; 1/4 pin 2 9/32 1/4 1-1/4 $ /32 1/4 1-1/4 $23.36 Order No Mfg No Type A B C D List /32 15/32 7/ $ /32 15/32 9/16 1/4-28 $ /32 15/32 9/16 1/4-28 $28.58 Cable Clamp Order No Mfg No A B C D E List /8 1/2 3/16 $ / /2 1/2 12/64 $ / /2 1/2 7/32 $3.22 Order No Mfg No A B C D List /8 1-3/8 1/2 12/64 $ /2 1/2 12/64 $1.67 Terminal Eye Order No Mfg No A B C D E List /64 5/16 3/4 1/2 $6.31 Terminal Eye Pin Order No Mfg No A B C D List Pivot /2 5/16 1/ /32 $18.00 Order No Mfg No A B C D E List /4 7/16 21/64 9/64 5/8 $ /4 1/2 7/16 9/64 3/4 $ /4 7/16 3/ /32 $ /4 7/16 3/ /16 $25.29 Ongaro Stainless Steel Shift and Throttle Knobs 1-1/2 Knobs Fit: Morse MT-3, MV-2, Twin S, Twin SR, ST, CSB and MJB Teleflex CH 5600 Most Twin and Single Controls with red and black knobs with 3/8 (24) threads. Order No Mfg No Item Size List /2 S/S Smooth $ /2 Red Grooved $ /2 Gold Grooved $31.05 Teleflex Control Parts Shift Handle Knob Shift Control Arm Engine & Conmtrols Cable Hook Clips Order No Mfg No Type A B C D E List Single 1 1/2 3/8 1-1/2 13/64 $ Dual 1-1/4 3/4 3/8 1-1/2 13/64 $41.29 Ongaro Marine Stainless Steel Shift/Throttle Control Arms Fits Morse Twin SR and Teleflex CH5600 controls. Prices and specifications subject to change without notice $

11 Sea Dog Tiller Rope Grommets Molded of durable polyethylene. Fits 3 opening. 2-7/8 I.D., 3-7/8 flange diameter. Counterbore holes for #10 fasteners. Cable Boots & Grommets Rigging Flange Engine & Controls TH Marine Motorwell Boots Functional motorwell cable boot that is easy to install. No longer is it necessary to split or cut your motorwell boot to pass cables through. This cable boot provides a fully open area to pass wiring and cables through and when rigging is complete simply pull cable tie snug around wires and cable to complete installation. Constructed of rugged vinyl that resists ultraviolet rays, gasoline and oil. Other manufacturer boots are made of rubber which will degrade in the marine environment. This cable boot is available in three sizes to cover all installation requirements. Order No Mfg No Size Color List CB-2-DP 2 Black $ CB-1-DP 3 Black $ CB-4-DP 4 Black $ CB-2W-DP 2 White $ CB-1W-DP 3 White $ CB-4W-DP 4.5 White $9.33 TH Marine Cable Boot Grommets Protects cables, hoses and wires from chafing. Flange fits into pass-thru hole. Cable boot snaps into grommet. Order No Mfg No Size List CBG-2-DP 2 $ CBG-1-DP 3 $ CBG-4-DP 4-1/2 $ $6.48 TH Marine Bulkhead Strain Relief Hose Kit Distributes strain from bends in hose. Water tight gripper fitting - no leaks. Great for hydraulic steering hose. Bulkhead fitting has flange for protection. Flange is 2-3/4 diameter and requires 1-1/4 hole BSR-IK-DP $20.16 TH Marine Cable Boot Finishes and protects pass thru hole for wires and cables. Rugged marine vinyl - resists UV, gasoline and oil. Cable tie snugs around wires and cables. Order No Mfg No Size List CB-1-DP 3 $ CB-4-DP 4-1/2 $11.19 TH Marine Cable Boot Reinforcing Rings Order No Mfg No Size List CBR-2-DP 2 (Does not fit DetMar 2 Cable Boot) $ CBR-1-DP 3 $ CBR-4-DP 4-1/2 $4.08 Det Mar 2 Cable Boot Molded-in, tabbed, tear-proof slots provide over 2.5 diameter of open area for cable access without the need to split or cut the boot. Contoured sides retain shape after installation for water protection. Covers 2 Hole. Does not require Cable Boot Ring. Covers 2 hole. Order No Mfg No Size List P 2 $ Prices and specifications subject to change without notice.

12 Trident Marine Rigging Flange & Hose Kits Rugged poly hose reverse threads into flange for complete protection of hoses, cables and electric lines. Moisture, dust and UV resistant. Kit includes rigging flange (3-1/8 O.D.) and 4 feet of 2 rigging hose. Seperate Parts TFK-4 $ x 50 Rigging Hose Black; soldy by ft. $ Black Transom Flange $17.85 TH Marine White Rigging Flange & Rigging Hose Molded polypropylene flange is internally threaded to retain rigging hose and to make rigging adjustment simple. The back side of the flange is textured to allow inverted mounting. Rigging hose is durable, flexible, and kink resistant. Hose sold by the 50 roll RF-2 Rigging Flange $ RFH2-DP 2 x 50 Rigging Hose $ Sea Dog Steering Wheel Maneuvering Knob Investment cast 316 stainless steel. Fits steering wheels with rim diameter from 5/8 to $33.06 Stainless Steel Destroyer Steering Wheel.304 stainless steel with black center cap. 5 spokes. 22 dish. 15 diameter. Fits 3/4 shaft S-9002 $ Soft Grip Steering Wheel Ideal for bass boats, sport boats and runabouts. Patented design provides a comfortable, firm grip. Contemporary styling with soft black PVC outer rim and high-impact, one-piece plastic inner core. Resists UV rays to prevent fading. Soft Grip is nonmagnetic so it will not interfere with compass readings. 3-3/8 deep dish. 13 diameter rim. NMMA approved $55.83 Rigging Flange Steering Knobs Steering Wheels Engine & Conmtrols Custom Accessories Steering Wheel Spinner For easy steering control. Attaches to most steering wheels. Twin-band mounting. Davis Lube II Stainless Steel Lubrication Steering Nut Lube II allows sticky, hard to move steering rods to be properly and easily lubricated for smooth, easy steering action.the system includes a stainless steel lubricating nut with an oil seal and a grease (zerk) fitting. This lubricator s unique design keeps moisture and contaminants out while enabling you to pour or pump several types of lubricant in. Works for both mechanical and hydraulic systems. Fits all major US and foreign motors (7/8 x 14 pitch threads). Easy installation. Marine grade stainless steel nut for salt and fresh water use $ $25.99 Prices and specifications subject to change without notice. 485

13 Teleflex Steering Systems & Parts Teleflex Safe-T QC Steering System For power steered boats in which No FeedBack systems are not required. Offers the quick response of three-turn steering and easy installation with a patented, no-toolsrequired cable connection at the helm. For all power-assisted stern drive boats with wheels up to 16 diameter. Replaces all Teleflex Safe-T helms made since 1968 with little or no dash modifications. (Requires use of SSC62 QC steering cable.)for single station use only. Kits include: cable, helm, bezel and hardware. Standard ¾ tapered steering shaft. Stainless steel cable output ends. Fast, easy installation: uses simple snap-in cable connection, Teleflex Quick Connect (QC) cable and industry-standard Safe-T mounting hardware. Meets A.B.Y.C. standards. Meets N.M.M.A. certification requirements. Order No Mfg No Length List SS $ SS $ SS $ SS $ SS $ SS $ SS $ SS $ SS $ Teleflex BayStar Compact Steering BayStar Compact system is designed to fit even the narrowest of splashwells. For outboard boats under 150 hp total, BayStar provides hydraulic steering performance for the lower horse power range. For outboard engine applications over 150 hp, choose one of the Seastar family of products. Features Patented No FeedBack Steering lock valves. 5 turns lock-to-lock. Up to 150 horsepower (total). Available either as separate components or as a complete system ready to install. Fixed cylinder. BayStar hydraulic tubing cut to suit application. Tilt option available. Requires 3 (76mm) cut-out hole in dash. Requires 21 (534mm) splashwell width. Kit includes: Helm, Cylinder, tubing, oil HK4200A $ Baystar Parts & Accessories HH4314 Front Mount Helm $ Engine & Controls Teleflex Steering Parts SA35680P SA27361P SA27274P SA27065P SA3568DP F/Big-T & Safe-T Bezel Safe-T QC Helm Safe-T Helm Spent Travel Tube (Big T & Safe T) $ SA27361P Link Arm Kit (Johnson/Evinrude) $ SA27274P Support Tube Kit (Aluminum) $ SA27065P Clamp Block Kit $ SB27483P Safe-T Bezel 20 Black $ SB27484P Safe-T Bezel 90 Black $ SH5023P Safe-T Rotary Helm $ SH5094P Safe-T QC Helm $ Prices and specifications subject to change without notice. Teleflex Seastar I Hydraulic Steering Single and multiple non-power-assisted outboard engine applications up to 350 hp for singles (700 hp for counter-rotating twins). Patented Pivot design allows independent engine tilt in dual engine installations. SeaStar Outboard Hydraulic Steering offers three models of steering cylinders to suit most applications. The standard and most commonly used model is the Front Mount Steering Cylinder HC5345/47/48/58. Before ordering it is necessary to determine the best possible application for your boat, taking into account the hull design, speed and usage of the boat. Keep in mind that engines today have become larger, more powerful and heavier than in the past. Features Patented No FeedBack Steering lock valves. Low friction hydraulic steering system. 5 turns from lock-to-lock (single cylinder). Compact helm has only a 4-7/16 foot print needs only 3 dash hole (Tilt requires larger hole). Tilt option available. Available either as separate components or as a complete system ready to install. Standard 3/4 tapered steering shaft. Various alternative helm and cylinder combinations available (details available on request). Multiple engine applications require the use of a tie bar (details available on request). HYDRAULIC HOSES NOT INCLUDED; ORDER SEPARATELY HK6400A Complete System W/O Hoses $

14 Hoses for SeaStar I Steering Systems Order No Mfg No Length List HO $ HO $ HO $ HO $ HO $ HO $ Seastar I & II Helm Pumps HH5261 Seastar I, Rear Mount 1.7 cu. in. $ HH5262 Seastar II, Rear Mount, 2.4 cu. in. $ HH5271 Seastar I, Std. Mount, 1.7 cu. in. $ HH5272 Seastar II, Std. Mount, 2.4 cu. in. $ HC5370 HC5313 Seastar Steering Cylinders HH5271 & HH5272 HH5261 & HH5262 Order No Mfg No Description Displacement List HC5370 Side Mount/ Outboard 8.2 cu. in. $ HC5318 Brass Inboard Type 10.2 cu. in. $ HC5313 Aluminum Inboard Type 8.2 cu. in. HC5318 HC cu. in. $ HC5345 Front Mount Outboard 8.3 cu. in. $ HA5431 HS5157 HS5161 Parts for Seastar I & II Steering Systems HA5431 Vented Fill Plug for Seastar Helm $ HA5418 Square Back Mount Kit for Seastar HH5271 and HH5272 $ HS /4 Quad Ring Shaft Seal $ HS5182 Cylinder Seal Kit Fits HC5313 $ HS HS HS HS5167 HA5418 HS5182 HS6038 Helm for HH5250 & HH5275 Capilano Helms Helm Seal Kit Seastar Seal Kit for old style square mount Seastar Helms Cylinder Seal Kit with screw in end glands w/tool for Front Mount Outboard Cylinder (HC5340) Cylinder Seal Kit with screw in End Gland; for Front Mount Outboard Cylinder (HC5340 HS5151 HS5176 HS5167 $61.24 $57.36 $ $ HA5432 Non-Vented Fill Cap $ HS5176 Seal Kit for HelmS #HH5271/72/61/62 $76.76 SeaStar Hoses Sea Star Helms Sea Star Cylinders Sea Star parts Engine & Conmtrols Prices and specifications subject to change without notice. 487

15 Teleflex Sea Star System Parts Hycrauli Oil MicroCommander Controls Engine & Controls Hydraulic Oil for Controls & Steering Systems Order No Mfg No Type Size List HA5430 Teleflex Seastar Quart $ HA5440 Teleflex Seastar Gallon $ HA5455 Sea Star Hydraulic Fluid Fill Kit Hynautic (Engine Controls Only) (Old MCO-3) Gallon $ HA5438 $25.85 Hynautic Parts for Synflex N2 Nylon Tubing Hynautic N2 Nylon Tubing Insert $ Hynautic N2 Nylon Tubing Tube Nut $8.51 ZF MicroCommander Controls ZF MicroCommander Controls (Formerly Mathers) For complete control of engine speed and direction, ZF MicroCommander is the absolute leader in marine propulsion control systems. Engineered to handle even the toughest maneuvering situations, MicroCommander is proven, through thousands of installations, to be unequaled in electronic propulsion control. Superior to mechanical and hydraulic controls with their attendant throttle creep and necessity for constant adjustment, MicroCommander is designed for vessels ranging from 25 to 100 using single or twin engines from 100 to 1,000 horsepower. A single lever controls both clutch and throttle for each engine. Within the microcontroller, or actuator, electronic impulses are converted into mechanical output to operate the throttle and clutch. Proprietary software gives the operator precise, instant response throughout any maneuver. Under any conditions. Safety and protection for engine and transmission, even with the most inexperienced operator. MicroCommander s sequential operation allows maneuvering from full ahead to full astern in one quick shift without risk of damaging the drive train or engine. Up to five control stations. Each system includes one control head with one or two levers to control single or twin engines. As a popular option, up to four additional control heads can be connected to the actuator. Cockpit, bridge, bow or stern, MicroCommander control stations can be installed wherever desired. Station transfer buttons efficiently switch control from one station to another. Engine Synchronization. Twin engine synchronization is another popular option which provides two benefits. First, it increases comfort by reducing noise and vibration. Second, it increases operating efficiency by reducing fuel consumption. This feature is enabled by depressing the transfer button, giving you the ability to turn it on and off at your leisure. Trolling Valve. Our optional trolling actuator allows the skipper to control clutch slip while reducing vessel slow speed. A full range of shaft speeds is available from the same control. Hand-Held Remote Control. As one of the up-to-five control stations available with MicroCommander, our optional hand-held remote control offers all the functions of our fixed stations from anywhere on the vessel. This portable remote can be plugged in at different receptacles throughout the boat allowing the skipper to move about the boat at will while still retaining complete control. With emergency engine shutdown and built-in station transfer buttons...even bow and stern thruster control...the hand-held remote brings complete freedom to the skipper on the move. Required Components 1. Actuator for each engine 2. Control and transfer button for each station 3. 8-conductor cable between control levers and actuators. 4. Actuators connected to engines with standard push-pull cables; Morse 33C. Options 1. Hand-held Remote Control 2. Engine Synchronizer 3. Trolling valve control 4. Multi-station controls (up to five stations) ZF Electronic Controls components and parts on following page. HS-02 HS-05 KS-07 Hynautic Seal Kits HS-02 H-20 Helm Seal Kit $ HS-05 H-50 Helm Seal Kit $ KS-07 K-10 Cylinder Seal Kit $ Prices and specifications subject to change without notice.

16 Actuators MC-2000-S MC Actuator $2, Troll Actuator $2, Control Heads MC Dual Chrome Control Head $1, MC Dual Black Powder Coat w/chrome Levers $1, L Dual Chrome Lever Control $ Dual Chrome Low Profile $ P Dual Chrome Lever Control with Plug* $ Dual Black T-Handle Control $ L Left Single Black T-Handle Control $ R Right Single Black T-Handle Control* $ Internal Control $3, Dual Chrome Split Control L/R $ Remote Control with Thruster Control $4, Remote Control Head* $3, Parts Tachometer Sender for Synchronizer $ Remote Control Mounting Bracket $ Magnetic Pick Up TAchometer Sender $ Black Blank Aluminum Mounting Pad $ Black Machined Aluminum Mounting Pad $ White Blank Aluminum Mounting Pad $ White Machined Aluminum Mounting Pad $ Control Plug Connector $ ETA 10 Amp Circuit Breaker $ Cable Serial Communications Cable (Triple + Screw) $ Serial Communication Cable $ Serial Connection Cable $ Serial Connection Cable $ Tachometer Feedback Cable $ Tachometer Feedback Cable $ Serial Communication Cable $ Control Head Cable $ Control Head Cable $ Conductor Cable $ Conductor Cable (500 Roll)/ Sold by the ft. $ Conductor Starter Interupt Cable (250 Roll) Sold by the ft. $ Conductor Power Cable (250 Roll) Sold by the ft. $ Prices and specifications subject to change without notice. 489 Teleflex Sea Star System Parts Hycrauli Oil MicroCommander Controls Engine & Conmtrols