Part 3FHX7 ELECTRONIC HORN Volt DC U.L. Listed. INDUSTRIAL HORN Original Equipment Type U.L. Listed. Rating: 115 Decibel 345 Hz

Transcription

1 LA Full L Bracket The Brand LC Short 90 Bracket INDUSTRIAL HORNS Part 3FHX7 ELECTRONIC HORN Volt DC U.L. Listed A new-state-of-the-art patented horn technology developed for heavy-duty industrial use. There are no moving parts or connects to pit or wear out, no moving contact points, no sparks, no induced noise in sensitive equipment. Low current demand works directly from horn switch without the need of a relay and capable of lighter gauge wire. The Model 3FHX7 is designed to sound for long extended periods without the worry of burn out like old fashion electromechanical type horns. All internal electronic components are set in epoxy in the plastic case making the Model 3FHX7 virtually weather resistant. No diaphragm fatigue, no volume or frequency changes and no adjustment screws for frequency. Standard 1/4 male push-on terminals are molded into heavy plastic housing eliminating horn damage from rain and spray water, which is common in conventional horns. Automatically adjusts to a voltage range of VDC. Mounts with one bolt supplied. Rating: Decibels 380 Hz Volt DC Size:: L 4-3/4 x W 4-7/8 x H 4-3/4 INDUSTRIAL HORN Original Equipment Type U.L. Listed This series of industrial horns is available in a full range of voltages to meet your requirements; 12, 24, 36, 36/48, 48 or 72/80 volt DC. The horn is constructed of all metal, with a durable painted black finish. For universal installation each horn model has two terminal posts each having screw and 1/4 push-on terminal connections. The horn has a 5 diameter. MODEL VOLTAGE AMP BRACKET OTHER 3FHX8 12-VDC 4 Full Length L 3FHX9 12-VDC 4 Short Length 90 3FHY1 24-VDC 2 Full Length L 3FHY2 24-VDC 2 Short Length 90 3FHY3 36/48-VDC 1.5 Short Length 90 With Resistor 3FHY4 48-VDC 1.5 Short Length 90 3FHY5 72/80-VDC 1.5 Short Length 90 With Resistor Rating: 115 Decibel 345 Hz INDUSTRIAL DISC HORN Universal disc horn, O.E. type, available in 12, 24 and 36 volt DC. Each model horn has two terminal posts with screw connectors for one (1) or two (2) wire system. Easily installs to industrial equipment motorcycles, cars and trucks with the heavy-duty L bracket. Painted steel construction assures long life and has an attractive front black plastic grill. Comes with strong zinc plated 90 degree L mounting bracket and mounting hardware. MODEL VOLTAGE AMP 3FHY6 12-VDC 2.2 3FHY7 24-VDC 1.8 3FHY8 36-VDC 1.5 Rating: 114 Decibel 385 Hz Industrial Horns 1 Truck Horns 2-3 Electric Horns 4 Air Horns 5-6 Marine Horns 7 Parts & Accesories 8-9

2 TRUCK HORNS Part 3FHV5 HEAVY DUTY DUAL TRUMPET Roof Mount Air Horn When conditions demand a powerful sound, use the Model 3FHV5 roof mounted horn. Every component of the horn is made to withstand the extremes of all weather conditions. The mounting base fastens to the vehicle with a rubber gasket and four stainless steel bolts providing secure watertight installation. The Model 3FHV5 comes with a flexible inlet hose with brass fittings, making installation easy and hidden from view. Both trumpets are finished in bright triple plated chrome, making the horn an attractive addition to any truck. All needed mounting hardware is included. The Model 3FHV5 requires an on-board air system (recommended on-board air system Model 3FHW1). 125 Decibels 380/456 Hz Horn s Size: L 14-1/2 x W 7-3/4 x H 5 Operating Pressure: 80 to 110 psi. Part 3FHV6 BIG RIG TRUCK HORN SOUND Electric Solenoid Activated Chrome metal trumpets that are triple plated for all weather conditions. Comes complete with an on-board air system. A perfect addition to any 12-volt vehicle, RV s, trucks, SUV, etc. The Model 3FHV6 also comes with a 20 foot coiled filler air hose and fittings to inflate sporting equipment, etc. Kit includes all needed mounting hardware, nylon hose and an electric activation solenoid, 20 ft. coiled hose with inflation fittings, wire, horn button switch and more. 125 Decibels 310/380 Hz Compressor s Size: L6 x W 3-1/4 x H 5 Horn s Size: L 17 x W 7 x H 5 Tank s Size: L 8 x W 5 x H 5-1/2 Operating Pressure: 80 to 110 psi. Part 3FHV9 TRUCK TRAIN HORN Three Brass Chrome Plated Trumpets When a truck owner demands a powerful sound, the Model 83FHV9 is the horn. Gives any truck a true train horn sound. Constructed of all metal with three (3) brass triple chrome plated trumpets. The horn s base is painted metal. The Model 83FHV9 requires an on-board air system with a minimum of two-(2) gallon storage tank, (recommended on-board air system is Model 3FHW1). Comes with all mounting hardware and 10 feet of 1/4 O.D. nylon highpressure hose. Built with heavy-duty 12-volt electric solenoid. 152 Decibels 307/347/440 Hz Horn size: L 16-1/2 x W 14-3/4 x H 11

3 TRUCK HORNS Part 3FHV7 (Low Tone) Part 3FHV8 (High Tone) AIR HORN ROOF MOUNT CHROME Big Rig Truck Horns The Model 3FHV7 an 3FHV8 produces a powerful truck horn sound. It is made with two sturdy roof mounts that help eliminate trumpet vibration on the roughest roads. A front deflector cover provides protection against rain, road dirt, snow, bugs, etc. from entering the horn trumpet, protecting the sound and your investment. The air feeder hose connection is made through the base and is not externally visible. The beautiful chrome appearance will look great on any truck and will provide an alerting sound for a greater distance. Requires an on board air system, (recommended on-board air system Model 3FHW1). Includes a flexible inlet hose with brass fittings, chrome front support bracket and mounting hardware. Model 3FHV7 Low Tone size: L 28 x W 8-1/4 x H 4-1/2 Sound output with 90/100 Psi: 130 Decibel 285 Hz Model 3FHV8 High Tone size: L 24-1/2 x W 8-1/4 x H 4-1/2 Sound output with 90/100 Psi: 130 Decibel 330 Hz English/Spanish packaging. Part 3FHW1 HEAVY DUTY ON-BOARD AIR SYSTEM The model 3FHW1 is designed for use with train horns or any high-pressure horns that require an onboard air system. Designed with special extended tank 5.5 liters and a heavy duty, high volume compressor. The model 3FHW1 is a simple two piece air supply system consisting of a metal storage tank, compressor, 10 ft. of 1/4 O.D. nylon air hose, brass fittings and mounting hardware. The compressor is balanced and has heavy rubber bushings in it s mounting base to virtually eliminate vibration. Has a built-in pressure regulator to maintain 110 psi. Tank s Size: L 18 x W 5 x H 5-3/4 Compressor Size: L 6-1/2 x W 3-1/2 x H 5

4 ELECTRIC HORNS Part 3FHU2 (Low Tone) Part 3FHU3 (High Tone) DISC HORNS Replacement Type - for all 12-Volt vehicles Replacement disc horns, O.E type Models 3FHU2 and 3FHU3. Both models are 12 volts, 2 terminal type, standard1/4 terminals. Idea for all systems that are one or two wire. Easily installs to industrial equipment, motorcycles, cars and trucks using the flat metal bracket. Painted steel construction, assures long life in all weather environments. Includes mounting bracket, 1/4 terminals, ground wire with terminals for one-wire horn systems and mounting hardware. Model 3FHU2 Low Tone Size: Diameter 3-3/4 115 Decibels 360 Hz Model 3FHU3 High Tone Size: Diameter: 3-3/4 115 Decibels 420 Hz Decibel rating measured at 1 (one) meter. English/Spanish packaging. Government approved for sale in Mexico. Part 3FHU4 (Low Tone) Part 3FHU5 (High Tone) DOMESTIC HORNS Replacement Type - for all 12-Volt vehicles Replacement domestic horns, O.E. type Model 3FHU4 and 3FHU5. Both models are two terminal type standard 1/4 terminals. Ideal for replacement or new installation for cars, trucks, motorcycles, etc. Easy to install in any 12 volt vehicle with either one or two terminals. Includes mounting bracket, 1/4 terminals, ground wire with terminals for one-wire horn systems and mounting hardware. Model 3FHU4 Low Tone Size: Diameter 3-1/2 115 Decibels 410 Hz Model 3FHU5 High Tone Size: Diameter: 3-1/2 115 Decibels 510 Hz Decibel rating measured at 1 (one) meter. English/Spanish packaging. Government approved for sale in Mexico. Part 3FHU6 (Low Tone) Part 3FHU7 (High Tone) DOMESTIC HORNS Extra Loud Replacement Type - for all 12-Volt vehicles Replacement domestic horns EXTRA LOUD, O.E. type Model 3FHU6 and 3FHU7. Perfect for new or replacement installations for: industrial equipment, cars, SUV s, trucks and motorcycles. Easily installs in any vehicle with one or two wire 12-volt system. For those user who desires a extra loud, better quality replacement horn. Includes mounting bracket, 1/4 terminals, ground wire with terminals for one-wire horn systems and mounting hardware. Model 3FHU6 Low Tone Size: Diameter 3-1/2 116 Decibels 410 Hz Model 3FHU7 High Tone Size: Diameter: 3-1/2 116 Decibels 510 Hz Decibel rating measured at 1 (one) meter. English/Spanish packaging. Government approved for sale in Mexico. Part 3FHU8 DOMESTIC HORN SET Replacement Type - for all 12-Volt vehicles Two universal horns one high tone, one low tone. Easy to install in any 12 volt vehicle. Ideal for installation with all 12-volt vehicles with one or two systems. Each horn has a bright chrome grill and a red plastic cover. Rugged construction will ensure many years of dependable service. Includes mounting bracket, 1/4 terminals, ground wire with terminals for one-wire horn systems and mounting hardware. Model 3FHU8 Horn Size: Diameter 3-1/2 each horn 115 Decibels 410 / 510 Hz Decibel rating measured at 1 (one) meter. English/Spanish packaging. Government approved for sale in Mexico.

5 AIR HORNS Part 3FHX5 AIR HORN Compact One Piece Design The latest in air horn technology, one-piece design, that requires no hoses. Installs in minutes by simply transferring the factory horn wires to the compressor. Mounts with one bolt included in kit. Produces a powerful dual tone air horn sound that is two times (2X) louder than the factory horn. The Model 3FHX5 is compact in size to fit any car, truck, motorcycle and any 12-volt vehicle that wants a loud air horn sound. Heavy-duty maintenance free compressor will provide years of dependable service. 118 Decibels 530 / 680 Hz L 4-1/4 x W 2-1/2 x H 4-1/2 English/Spanish packaging. Government approved for sale in Mexico. Part 3FHX6 AIR HORN CHROME Compact One Piece Design The Model 3FHX6 has all the same features as Model 3FHX5 but with a dress-up bright chrome plated finish, letting the vehicle stand out in chrome. The diaphragms have a redesigned chrome cover as well as a chrome cover to the top of the compressor. Both covers are aerodynamically shaped making Model 3FHX6 a great choice to dress-up any engine compartment and motorcycles. 118 Decibels 530 / 680 Hz L 4-1/4 x W 2-1/2 x H 4-1/2 English/Spanish packaging. Government approved for sale in Mexico. Part 3FHV2 DUAL TRUMPET Roof Mount Air Horn Two trumpet air horn that will look great on any vehicle. The trumpets are metal triple chrome plated. Gives any vehicle a big rig truck sound. The Model 3FHV2 is designed for roof mounting on trucks, vans, RV s, etc. Kit comes with a heavy-duty compact compressor, relay, mounting hardware, hose and chrome weather protection covers for the trumpets. 125 Decibels - 390/435 Hz Horn Size: L 13-1/2 x W 6-1/4 x H 3-1/8 Compressor Size: Diameter 2-1/4 Height 4-1/2 English/Spanish packaging. Government approved for sale in Mexico.

6 AIR HORNS Part 3FHU9 TWO TRUMPET Mid Range Sound Air powered two (2) durable red plastic trumpets that produce a powerful sound that will be heard. Easy to install in all vehicles using the heavy-duty compact chrome plated compressor, which is maintenance free. The Model 3FHU9 includes relay, hose, direct drive compressor and mounting hardware. 120 Decibels - 780/840 Hz - Middle Range Sound Longest Trumpet: 8-1/2 Compressor Size: Diameter 2-1/4 Height 4-1/2 English/Spanish packaging. Government approved for sale in Mexico. Part 3FHV1 TWO TRUMPET Big Rig Truck Sound Air powered horn that produces a powerful Big Rig Truck Sound. The two (2) durable red plastic trumpets that are easy to install in any vehicle. Heavy-duty chrome plated compact compressor that is maintenance free. Kit contains relay, hose and all mounting hardware. The Model 3FHV1 has a heavy-duty 12-volt chrome compact compressor for easy installation. 120 Decibels - 410/440 Hz Longest Trumpet 12-1/4 Compressor Size: Diameter 2-1/4 Height 4-1/2 English/Spanish packaging. Government approved for sale in Mexico.

7 MARINE HORNS Part 3FHW2 (Low Tone) Part 3FHW3 (High Tone) STAINLESS STEEL TRUMPETS The Models 3FHW2 an 3FHW3 are electric horns that are 100% stainless steel 304 non-magnetic grade with a bright polished finish that will not rust. Designed for exterior mounting on any 12-volt vehicle; trucks, SUV s, RV s and boats in a fresh or salt-water environment and ideal for almost any weather condition. Both models are maintenance free and there is no compressor or hoses. Includes a front stainless steel adjustable trumpet support to prevent vibration. Comes complete with rubber gaskets and stainless steel mounting hardware. Model 3FHW2: Low Tone L 18-1/2 x W 4 x H 4-1/2 115 Decibels 330 Hz Model 3FHW: High Tone L 15-1/2 x W 4 x H 4-1/2 115 Decibels 408 Hz English/Spanish packaging. Part 3FHW4 STAINLESS STEEL TRUMPET SET The Model 3FHW4 is an electric horn set, two trumpets that are 100% stainless steel 304 non-magnetic grade with a bright polished finish that will not rust. Trumpets are designed for mounting either next to each other or mounting independently in two different locations. Will provide years of dependable maintenance free service. Engineered for exterior use in almost any weather condition. Does not require a compressor or hoses. Ideal for any 12-volt vehicle such as trucks, RV s or boats in fresh or salt-water environments. Includes a stainless steel adjustable front trumpet support to prevent vibration. Comes complete with rubber gaskets and stainless steel mounting hardware 116 Decibels 330/408 Hz Long Trumpet Low Tone: - L 18-1/2 x W 4 x H 4-1/2 Short Trumpet High Tone: - L 15-1/2 x W 4. x H 4-1/2 English/Spanish packaging. Part 3FHW5 DUAL STAINLESS STEEL TRUMPET Dual trumpet electric horn bright polished stainless steel 304 non-magnetic grade. For exterior roof mounting on trucks, vans, RV s and boats. Produces a powerful dual trumpet sound that is sure to be heard. The Model 3FHW5 is ideal for any 12-volt electrical system, does not require a compressor or hoses and is maintenance free. Designed to give years of dependable service in any environment including salt water. Includes a stainless steel adjustable trumpet support to prevent vibration. Comes complete with rubber gaskets and stainless steel mounting hardware. 116 Decibels 330/408 Hz L 18-1/2 x W 8 x H 4-1/2 English/Spanish packaging.

8 HORN PARTS & ACCESSORIES Part 3FHW7 HORN BUTTON SWITCH Model 3FHW77 is a universal horn switch normally open, momentary push-button that can be used with any brand or model of horns or sirens. Easily mounts with two (2) screws provided. Made of metal to ensure years of dependable service. The 3FHW7 has a bright chrome finish. Switch Size: Width 2-5/8 Rated: 5 amps at 12-Volts DC English/Spanish packaging Part 3FHW8 HORN BUTTON SWITCH KIT Model 3FHW78 is a universal horn switch normally open, momentary push-button that can be used with any brand or model of horns or sirens. Comes with 10 ft. of 18-awg wire and hookup terminal. Easily mounts with two (2) screws provided. Made of metal to ensure years of dependable service. The 3FHW8 has a bright chrome finish. Switch Size: Width 2-5/8 Rated: 5 amps at 12-Volts DC English/Spanish packaging Part 3FHX3 PRESSURE SWITCH For On-Board Air System The Model 3FHX3 is a pressure switch is specifically designed for high-pressure on-board air systems; Model 3FHW1and is compatible with a wide variety of other manufactures on-board air systems. The 3FHX3 pressure switch is factory preset to turn on the compressor when tank pressure is below 80 psi. and turn off the compressor when the tank pressure is 110 psi., with a tolerance of ± 10% (pressure turn on/off pressure range is not adjustable). Rated to operate reliably up to 3.5 amps and is built to be compact in size. Wires connect to switch with standard 1/4 push-on terminals. Size: Diameter 1 x H 1-3/4 Thread type:1/4 inch pipe threads Rated load: 12-VDC 3.5 amp 1/4 inch push-on male terminals Part 3FHX2 ELECTRIC SOLENOID AIR VALVE For On-Board Air System Used with air horns that require an on-board air system. Horn sounds when the vehicle s horn button is pressed. Easily connects to any 12-volt electrical system and 1/4 O.D. nylon air hose. Case is all metal chrome plated and fittings are brass. Includes Solenoid has wire leads and mounting hardware. Hose fittings: 1/4 inch Size: L 3-1/4 x W 1 x H 1-3/4 Voltage: 12 volts Solenoid current: 300 mills English/Spanish packaging

9 HORN PARTS & ACCESSORIES Part 3FHX1 LANDYARD HAND PULL AIR VALVE For On-Board Air System Manually pulling the chain of the model 3FHX1 sounds the horn. Release to silence the horn. Use with air horns that require an on-board air system. Easily installs with two screws provided and to any 1/4 O.D. nylon air hose. Fitting size: 1/4 Case: ABS 2 ft. chrome chain English/Spanish packaging Part 3FHW9 FLEXIBLE NYLON AIR HOSE 10 ft. ¼ O.D. Nylon Hose A ten (10) foot length of durable, 1/4 O.D. nylon hose for installing air horns or replacing existing hose. Use with high-pressure air horn systems. Part 3FHX4 RELAY 12-Volt / 30 Amp Normally Open The model 3FHX4 is a heavy-duty relay, normally open connect 12-volt, four terminal ¼ male terminals. The black plastic waterproof case has an L bracket making mounting easy anywhere in the vehicle. Use with horns, fog lamps or any 30-amp circuit that requires a relay. Size: L 1 x W 1 x H 1 Rating: 12-volt / 30 amp Connection: Standard 1/4 push-on terminals Part 3FHW6 COMPRESSOR Direct Drive 12-Volt The Model 3FHW6 is a 12-volt heavy-duty direct drive compressor designed for tight engine compartments and motorcycles. It is compact in size height 4-1/2 x diameter 2-1/4, with a beautiful bright chrome finish. Produces a powerful psi. Mounts easily with only one bolt which is included The Model 3FHW6 is totally universal for all two (2) and three (3) trumpet air horns that use a direct drive compressor, (not designed to fill a tank).