SANY. SANY Group Products Manual

Transcription

1 SANY SANY Group Products Manual

2 SANY On Oct. 3 rd, 2003, Mr. Hu Jintao, Secretary-general of Central Committee of the CPC and the President of our country, made an inspection tour to Sany Heavy Industry Co., Ltd, and sent words to Sany people: you had a magnificent past yet. Wish you unite as one, and have a better future! On Apr. 7 th, Mr. Zeng Qinghong, member of Standing Committee of Political Bureau of CPC and Vice President of China, made an inspection tour to Sany Heavy Industry Co., Ltd, and sent words to Sany people: holding the wealth you ve made, you should keep forging ahead on the wealthy base. You should guard against arrogance and rashness, and then realize your noble ambition. On Mar. 28th, 2004, Mr. Huang Ju, member of Standing Committee of Central Political Bureau of CPC and Vice-premier of the State Council, made an inspection tour to Sany Heavy Industry Co., Ltd. Sany Heavy Industry Co., Ltd, invested by Sany Group, was established in 1994, with its headquarters located in the economic and technological development zone in Changsha. It was listed in Shanghai stock market on Jul. 3 rd, In 2004, the realized sales amount of the company was billion yuan with a profit of billion yuan. Now the general assets of the company is 4.32 billion yuan with 1.96 billion yuan of net assets. Sany Heavy Industry mainly engages in the research & development, manufacture and sale of engineering machinery. The products include over 110 types in 10 series such as construction machinery, road construction machinery, crane machinery, etc. The leading products include: trailer-mounted concrete pumps, truck-mounted concrete pumps, concrete batching plants, asphalt batching plants, rollers, pavers, motor graders, bulldozers, truck cranes, crawler cranes, etc, among which the market shares of trailer-mounted concrete pumps, truck-mounted concrete pumps and full hydraulic vibratory roller all rank the first place in China, and the output of truck-mounted concrete pump ranks the first place in the world. The company is the biggest enterprise manufacturing truck-mounted concrete pumps with long-arm support and big delivery volume in the world. In 2002, in Hong Kong International Business Center, the trailer-mounted concrete pumps of Sany Heavy Industry created a world-level record of 406m straight pumping height with a single pump; in 2004, 21 pumps of Sany Heavy Industry were put into use in the project of Dubai Tower, the highest skyscraper of the world. Sany Heavy Industry successfully developed the first full hydraulic motor grader in the world, the first third-gradation concrete conveying pump in the world and the longest 56-metre truck-mounted pump in our country. Sany Heavy Industry Research Academy, with a postdoctoral traveling workstation, is a state-level technology development center, which undertook the projects of national 863 plan and the research work of Great Equipment Project in the 10 th -Five-Year-Plan. Sany has more than 300 national patents and over 50 core technologies. Sany Heavy Industry has more than 100 sale and service institutions all over the country, 56 service network warehouses, and opened 800 and 4008 Green Passages. The well-equipped network and the all for customers operation conception links up the star-level service and the over-value service in the whole process before, during and after the sale. Sany Heavy Industry has passed the national certificates of ISO9000 Quality System, ISO14001 Environment Management System and OHSA18001 Profession Healthy & Security System, and the German TUV certificate. Mr. Liang Wengeng, the chairman of the board, is the main pioneer of Sany Group. He was voted as the deputies of the 8 th, 9 th and 10 th National People s Congresses, the National model worker, the National Outstanding Private Enterpriser, the outstanding constructor of the socialism with Chinese characteristics, and the gainer of National Wuyi Laboring Prize.

3 CONTENTS Truck-mounted Concrete Pump.1 Trailer-mounted concrete pump.15 Concrete Mixer Truck 25 Concrete Placing Boom..29 Concrete batching plant.35 Truck-mounted Concrete Stationary Pump..39 Bulldozer.43 Asphalt Mixture Mixer Transfer Truck 47 Asphalt paver.51 Roller..57 Motor grader.65 Asphalt batching plant..69 Pavement Maintenance Truck..74 Excavator.78 Crane.83 Crane of Container Front-handing Mobile 94 Rotary Drilling Rig..98

4 QUALITY IS CHANGING THE WORLD

5 SERIES OF SANY TRUCK-MOUNTED CONCRETE PUMPS 1

6 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY 52M & 56M Truck-mounted Concrete Pumps The VOLVO chassis (FM ); The RZ complex arm support with 5 folded and fully-hydraulically controlled nodal arms can produce a pumping volume of 120~140 m 3 /h; Automatic control of engine s rotary speed for energy saving; Open-type hydraulic system with the fully hydraulic steering, the electrohydraulic cushion, and the differential pressure response, which provides high reliability and slight steering shocking; Automatic retraction of concrete piston, which facilitates the checking and the replacing; The text display is adopted to show the operation parameters and the fault types. Also the multiple automatic protection system is equipped. 2

7 Main Technical Parameters for 52M & 56M Truck-mounted Concrete Pump Technical Parameters Model SY5480THB-52 SY5500THB-56 Chassis Model VOLVO FM12 VOLVO FM12 Chassis Drive Model Wheel Base 7200mm+1370mm+1370mm 7200mm+1370mm+1370mm Track Front Wheel 2028mm 2028mm Back Wheel 1835mm 1835mm Tyre Type 12.00R R20 Min. Turning Radius 12.5m 12.5m Brake Distance 10m/30km/h 10m/30km/h Type 5 folded and fully-hydraulically controlled nodal arms 5 folded and fully-hydraulically controlled nodal arms Delivering Pipe Diameter DN 125 DN 125 Length of End Hose 3m 3m The First Nodal Arm Length 10950mm 11720mm Turning Angle The Second Nodal Length 9170mm 9950mm Arm Turning Angle Arm Support The Third Nodal Arm Length 9050mm 9990mm Turning Angle The Fourth Nodal Arm Length 9660mm 9970mm Turning Angle The Fifth Nodal Arm Length 8950mm 9970mm Turning Angle Rotation Angle of Turning Table Horizontal Length of Arm Support 47.78m 51.6m Max. Vertical Height of Arm Support 51.8m 55.6m Pressure of Hydraulic System 32MPa 32MPa Lubricating Mode Manual grease lubrication, automatic lubrication by hydraulic oil Manual grease lubrication, automatic lubrication by hydraulic oil Capacity of Hydraulic Oil Tank 900L 900L Control Manual/Remote Control Manual/Remote Control Max. Water Pressure of Water Pump 2MPa 2MPa Capacity of Water Tank 700L 700L Cooling Mode of Hydraulic Oil Air Cooling Air Cooling Cleaning Mode of Concrete Pipe Water Flushing/Drying Washing Water Flushing/Drying Washing Dead Weight kg kg Max. Speed 85km/h 85km/h Total Length 14360mm 14874mm Overall Dimension Total Width 2495mm 2495mm Total Height 3985mm 3995mm Engine Pumping System Engine Type In-line 6-cylinder, electronic-injection diesel engine In-line 6-cylinder, electronic-injection diesel engine Engine Model D12C420 D12C420 Output Power 309KW(420PS)/ rpm 309KW(420PS)/ rpm Max. Torque 2000Nm/ rpm 2000Nm/ rpm Tail Gas Discharge Standard Euro III (Environmental Protection Type) Euro III (Environmental Protection Type) Capacity of Fuel Tank 450L (with oil-water separator) 450L (with oil-water separator) Discharge Capacity 12.1L 12.1L Drive Mode Hydraulic Hydraulic Oil Cylinder Inner Diameter X Stroke Φ 160mm 2200mm Φ 140mm 2000mm or Φ 160mm 2200mm (large discharge capacity) Delivery Cylinder Inner Diameter X Stroke Φ 260mm 2200mm Φ 230mm 2000mm or Φ 260mm 2200mm (large discharge capacity) Valve Form S-valve S-valve Theoretical Discharge Capacity of Concrete Theoretical Pumping Pressure Theoretical Pumping Times Low pressure: 140m 3 /h High pressure: 100m 3 /h High pressure: 12Mpa Low pressure: 8.5Mpa High pressure: 14times/min Low pressure: 20times/min Low pressure: 120m 3 /h High pressure: 67m 3 /h or High pressure: 11.8Mpa Low pressure: 6.38Mpa or High pressure: 13times/min Low pressure: 24times/min or Low pressure: 140m 3 /h High pressure: 100m 3 /h High pressure: 12Mpa Low pressure: 8.5Mpa High pressure: 14times/min Low pressure: 20times/min High Pressure Pumping Horizontal 850m/125A pipe Horizontal 850m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Hopper Volume 0.9m 3 0.6m 3 or 0.9 m 3 (large discharge capacity) Material Feeding Height 1.53m 1.40m or 1.53m (large discharge capacity) System Oil Pressure 32MPa 32MPa Slump 14cm~23cm 14cm~23cm Max. Aggregate Size 40mm 40mm High-low Pressure Switch Automatic Automatic (large discharge capacity) (large discharge capacity) (large discharge capacity) 3

8 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY 48M Truck-mounted Concrete Pumps Automatic control of engine s rotary speed for energy saving; Open-type hydraulic system with the fully hydraulic steering, the electrohydraulic cushion, and the differential pressure response, which provides high reliability and slight steering shocking; The pumping volume reaches 140m 3 /h, and the stepless control is adopted to meet various working conditions; Automatic retraction of concrete piston, which facilitates the checking and the replacing; The text display is adopted to show the operation parameters and the fault types. Also the multiple automatic protection system is equipped. 4

9 Main Technical Parameters for 48M Truck-mounted Concrete Pump Model Technical Parameters SY5412THB-48 SY5420THB-48 SY5420THB-48B SY5420THB-48C SY5420THB-48D Chassis Model BENZ ACTROS 4140 VOLVO FM12 VOLVO FM12 VOLVO FM12 VOLVO FM12 Chassis Drive Model Wheel Base mm mm mm mm mm Track Front Wheel 2054mm 2034mm 2028mm 2028mm 2028mm Back Wheel 1804mm 1831mm 1872mm 1872mm 1872mm Tyre Type 315/80R R R R R20 Min. Turning Radius 13m 12.5m 12.5m 12.5m 12.5m Brake Distance 10m/30km/h 10m/30km/h 10m/30km/h 10m/30km/h 10m/30km/h 5 folded and 5 folded and 5 folded and 5 folded and 5 folded and Type fully-hydraulically controlled nodal arms fully-hydraulically controlled nodal arms fully-hydraulically controlled nodal arms fully-hydraulically controlled nodal arms fully-hydraulically controlled nodal arms Delivering Pipe Diameter DN 125 DN 125 DN 125 DN 125 DN 125 Length of End Hose 3m 3m 3m 3m 3m The First Nodal Arm Length 9650mm 9650mm 9650mm 9650mm 9860mm Turning Angle The Second Nodal Length 8610mm 8610mm 8610mm 8600mm 8640mm Arm Turning Angle Arm Length 8610mm 8610mm 8610mm 8600mm 8300mm Support The Third Nodal Arm Turning Angle The Fourth Nodal Arm Length 8480mm 8480mm 8480mm 8500mm 8930mm Turning Angle The Fifth Nodal Arm Length 8450mm 8450mm 8450mm 8480mm 8079mm Turning Angle Rotation Angle of Turning Table Horizontal Length of Arm Support 43.8m 43.8m 43.8m 43.8m 43.8m Max. Vertical Height of Arm Support 47.8m 47.8m 47.8m 47.8m 47.8m Pressure of Hydraulic System 32MPa 32MPa 32MPa 32MPa 32MPa Lubricating Mode Manual grease lubrication, automatic lubrication by hydraulic oil Capacity of Hydraulic Oil Tank 800L 800L 800L 800L 800L Control Manual/Remote Control Manual/Remote Control Manual/Remote Control Manual/Remote Control Manual/Remote Control Max. Water Pressure of Water Pump 2MPa 2MPa 2MPa 2MPa 2MPa Capacity of Water Tank 600L 600L 600L 600L 600L Cooling Mode of Hydraulic Oil Air Cooling Air Cooling Air Cooling Air Cooling Air Cooling Cleaning Mode of Concrete Pipe Water Flushing Water Flushing Water Flushing Water Flushing Water Flushing Dead Weight kg kg kg kg kg Max. Speed 80km/h 80km/h 80km/h 80km/h 80km/h Total Length 13080mm 13050mm 13080mm 13080mm 13080mm Overall Total Width 2500mm 2500mm 2500mm 2500mm 2500mm Dimension Total Height 3990mm 3990mm 3990mm 3990mm 3990mm Engine Pumping System Engine Type V6 turbo surcharge, intercooling, automatic diesel engine In-line 6-cylinder, electronic-injection diesel engine In-line 6-cylinder, electronic-injection diesel engine In-line 6-cylinder, electronic-injection diesel engine In-line 6-cylinder, electronic-injection diesel engine Engine Model OM501LA D12 D12 D12 D12 Output Power 290KW/1800rpm 279KW(380HP)/1800rpm 279KW/ rpm 279KW/ rpm 279KW/ rpm Max. Torque 1850Nm/1080rpm 1850Nm/ rpm 1850Nm/ rpm 1850Nm/ rpm 1850Nm/ rpm Tail Gas Discharge Standard Euro II Euro III (Environmental Euro III (Environmental Euro III (Environmental Euro III (Environmental Protection Type) Protection Type) Protection Type) Protection Type) Capacity of Fuel Tank 400L (with oil-water 410L (with oil-water 410L (with oil-water 410L (with oil-water 410L (with oil-water separator) separator) separator) separator) separator) Discharge Capacity L 12.1L 12.1L 12.1L 12.1L Drive Mode Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Oil Cylinder Inner Diameter X Stroke Φ 160mm 2200mm Φ 140mm 2000mm Φ 160mm 2200mm Φ 160mm 2200mm Φ 160mm 2200mm Delivery Cylinder Inner Diameter X Stroke Φ 260mm 2200mm Φ 230mm 2000mm Φ 260mm 2200mm Φ 260mm 2200mm Φ 260mm 2200mm Valve Form S-valve S-valve S-valve S-valve S-valve Theoretical Discharge Capacity of Low pressure: 140m 3 /h Low pressure: 120m 3 /h Low pressure: 140m 3 /h Low pressure: 140m 3 /h Low pressure: 140m 3 /h Concrete High pressure: 100m 3 /h High pressure: 67m 3 /h High pressure: 100m 3 /h High pressure: 100m 3 /h High pressure: 100m 3 /h Theoretical Pumping Pressure High pressure: 12Mpa High pressure: 11.8Mpa High pressure: 12Mpa High pressure: 12Mpa High pressure: 12Mpa Low pressure: 8.5Mpa Low pressure: 6.38Mpa Low pressure: 8.5Mpa Low pressure: 8.5Mpa Low pressure: 8.5Mpa High pressure: Theoretical Pumping Times 14times/min High pressure: 13times/min High pressure: 14times/min High pressure: 14times/min High pressure: 14times/min Low pressure: Low pressure: 24times/min Low pressure: 20times/min Low pressure: 20times/min Low pressure: 20times/min 20times/min High Pressure Pumping Horizontal 850m/125A Horizontal 850m/125A pipe Horizontal 850m/125A pipe Horizontal 850m/125A pipe Horizontal 850m/125A pipe pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Hopper Volume 0.9m 3 0.6m 3 0.9m 3 0.9m 3 0.9m 3 Material Feeding Height 1.53m 1.40m 1.53m 1.53m 1.53m System Oil Pressure 32MPa 32MPa 32MPa 32MPa 32MPa Slump 14cm~23cm 14cm~23cm 14cm~23cm 14cm~23cm 14cm~23cm Max. Aggregate Size 40mm 40mm 40mm 40mm 40mm High-low Pressure Switch Automatic Automatic Automatic Automatic Automatic 5

10 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY 45M Truck-mounted Concrete Pumps Automatic control of engine s rotary speed for energy saving; Open-type hydraulic system with the fully hydraulic steering, the electrohydraulic cushion, and the differential pressure response, which provides high reliability and slight steering shocking; The pumping volume reaches 140m 3 /h, and the stepless control is adopted to meet various working conditions; Automatic retraction of concrete piston, which facilitates the checking and the replacing; The text display is adopted to show the operation parameters and the fault types. Also the multiple automatic protection system is equipped. 6

11 Main Technical Parameters for 45M Truck-mounted Concrete Pump Technical Parameters Model SY5381THB-45C SY5400THB-45B SY5411THB-45C SY5411THB-45D Chassis Model ISUZU CXH50T BENZ ACTROS 4140 VOLVO FM12 VOLVO FM12 Chassis Drive Model Wheel Base mm mm mm mm Track Front Wheel 2065mm 2054mm 2028mm 2028mm Back Wheel 1855mm 1804mm 1872mm 1872mm Tyre Type 295/80R22.5, 12R /80R R R20 Min. Turning Radius 10.2m 13m 12.5m 12.5m Brake Distance 10m/30km/h 10m/30km/h 10m/30km/h 10m/30km/h 5 folded and 5 folded and 5 folded and 5 folded and Type fully-hydraulically controlled fully-hydraulically controlled fully-hydraulically controlled fully-hydraulically controlled nodal arms nodal arms nodal arms nodal arms Delivering Pipe Diameter DN 125 DN 125 DN 125 DN 125 Length of End Hose 3m 3m 3m 3m The First Nodal Arm Length 9080mm 9080mm 9080mm 9440mm Turning Angle The Second Nodal Length 8000mm 8000mm 8000mm 8110mm Arm Turning Angle Arm Support Length 8000mm 8000mm 8000mm 7880mm The Third Nodal Arm Turning Angle Length 7900mm 7900mm 7900mm 8075mm The Fourth Nodal Arm Turning Angle The Fifth Nodal Arm Length 7850mm 7850mm 7880mm 7245mm Turning Angle Rotation Angle of Turning Table Horizontal Length of Arm Support 40.83m 40.83m 40.83m 40.75m Max. Vertical Height of Arm Support 44.75m 44.75m 44.75m 44.70m Pressure of Hydraulic System 32MPa 32MPa 32MPa 32MPa Lubricating Mode Manual grease lubrication, automatic lubrication by hydraulic oil Capacity of Hydraulic Oil Tank 800L 800L 800L 800L Control Manual/Remote Control Manual/Remote Control Manual/Remote Control Manual/Remote Control Max. Water Pressure of Water Pump 2MPa 2MPa 2MPa 2MPa Capacity of Water Tank 600L 600L 600L 600L Cooling Mode of Hydraulic Oil Air Cooling Air Cooling Air Cooling Air Cooling Cleaning Mode of Concrete Pipe Water Flushing Water Flushing Water Flushing Water Flushing/ Dead Weight kg kg kg kg Max. Speed 80km/h 80km/h 80km/h 80km/h Total Length 12665mm 12590mm 12635mm 12825mm Overall Dimension Total Width 2500mm 2500mm 2500mm 2500mm Engine Pumping System Total Height 3990mm 3990mm 3990mm 4000mm Engine Type 6 V-cylinders, 4 strokes, water cooled, surcharge, intercooling diesel engine V6 turbo surcharge, intercooling, automatic diesel engine In-line 6-cylinder, electronic-injection diesel engine In-line 6-cylinder, electronic-injection diesel engine Engine Model ISUZU 6WA1 OM501LA D12 D12 Output Power 265KW/2000rpm 290KW/1800rpm 279KW/ rpm 279KW/ rpm Max. Torque 1422Nm/1400rpm 1850Nm/1080rpm 1850Nm/ rpm 1850Nm/1050~1300rpm Tail Gas Discharge Standard Euro II (Environmental Euro II (Environmental Euro III (Environmental Euro III (Environmental Protection Type) Protection Type) Protection Type) Protection Type) Capacity of Fuel Tank 400L 400L 410L (with oil-water 410L(with oil-water separator) separator) Discharge Capacity L L 12.1L 12.1L Drive Mode Hydraulic Hydraulic Hydraulic Hydraulic Oil Cylinder Inner Diameter X Stroke Φ 160mm 2200mm Φ 160mm 2200mm Φ 160mm 2200mm Φ 160mm 2200mm Delivery Cylinder Inner Diameter X Stroke Φ 260mm 2200mm Φ 260mm 2200mm Φ 260mm 2200mm Φ 260mm 2200mm Valve Form S-valve S-valve S-valve S-valve Theoretical Discharge Capacity of Low pressure: 140m 3 /h Low pressure: 140m 3 /h Low pressure: 140m 3 /h Low pressure: 140m 3 /h Concrete High pressure: 100m 3 /h High pressure: 100m 3 /h High pressure: 100m 3 /h High pressure: 100m 3 /h Theoretical Pumping Pressure High pressure: 12Mpa High pressure: 12Mpa High pressure: 12Mpa High pressure: 12Mpa Low pressure: 8.5Mpa Low pressure: 8.5Mpa Low pressure: 8.5Mpa Low pressure: 8.5Mpa Theoretical Pumping Times High pressure: 14times/min High pressure: 14times/min High pressure: 14times/min High pressure: 14times/min Low pressure: 20times/min Low pressure: 20times/min Low pressure: 20times/min Low pressure: 20times/min High Pressure Pumping Horizontal 850m/125A pipe Horizontal 850m/125A pipe Horizontal 850m/125A pipe Horizontal 850m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Hopper Volume 0.9m 3 0.9m 3 0.9m 3 0.9m 3 Material Feeding Height 1.53m 1.53m 1.53m 1.53m System Oil Pressure 32MPa 32MPa 32MPa 32MPa Slump 14cm~23cm 14cm~23cm 14cm~23cm 14cm~23cm Max. Aggregate Size 40mm 40mm 40mm 40mm High-low Pressure Switch Automatic Automatic Automatic Automatic 7

12 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY 42M Truck-mounted Concrete Pumps Automatic control of engine s rotary speed for energy saving; Open-type hydraulic system with the fully hydraulic steering, the electrohydraulic cushion, and the differential pressure response, which provides high reliability and slight steering shocking; The pumping volume reaches 120m 3 /h, and the stepless control is adopted to meet various working conditions; Automatic retraction of concrete piston, which facilitates the checking and the replacing; The text display is adopted to show the operation parameters and the fault types. Also the multiple automatic protection system is equipped. 8

13 Main Technical Parameters for 42M Truck-mounted Concrete Pump Technical Parameters Model SY5361THB-42 SY5380THB-42 SY5392THB-42 Chassis Model BENZ ACTROS 4140 ISUZU CXH50T VOLVO FM12 Chassis Drive Model Wheel Base mm mm mm Track Front Wheel 2054mm 2065mm 2034mm Back Wheel 1804mm 1855mm 1831mm Tyre Type 315/80R R R20 Min. Turning Radius 13m 10.2m 12.3m Brake Distance 10m/30km/h 10m/30km/h 10m/30km/h Type 4 folded and fully-hydraulically 4 folded and fully-hydraulically 4 folded and fully-hydraulically controlled nodal arms controlled nodal arms controlled nodal arms Delivering Pipe Diameter DN125 DN125 DN125 Length of End Hose 3m 3m 3m The First Nodal Arm Length 10250mm 10250mm 10250mm Turning Angle The Second Nodal Arm Length 9180mm 9180mm 9180mm Turning Angle Arm Support Length 9240mm 9240mm 9240mm The Third Nodal Arm Turning Angle The Fourth Nodal Arm Length 9330mm 9330mm 9330mm Turning Angle The Fifth Nodal Arm Length Turning Angle Rotation Angle of Turning Table Horizontal Length of Arm Support 38m 38m 38m Max. Vertical Height of Arm Support 41.7m 41.75m 41.7m Pressure of Hydraulic System 32MPa 32MPa 32MPa Lubricating Mode Manual grease lubrication, automatic lubrication by hydraulic oil Capacity of Hydraulic Oil Tank 900L 900L 900L Control Manual/Remote Control Manual/Remote Control Manual/Remote Control Max. Water Pressure of Water Pump 2 MPa 2 MPa 2 MPa Capacity of Water Tank 600L 600L 600L Cooling Mode of Hydraulic Oil Air Cooling Air Cooling Air Cooling Cleaning Mode of Concrete Pipe Water Flushing/Drying Washing Water Flushing Water Flushing/Drying Washing Dead Weight kg kg kg Max. Speed 80km/h 80km/h 80km/h Total Length 13780mm 13650mm 13600mm Overall Dimension Total Width 2500mm 2500mm 2495mm Total Height 3990mm 3960mm 3980mm Engine Type V6 turbo surcharge, intercooling, 4 strokes, in-line 6-cylinder, water In-line 6-cylinder, electronic-injection automatic diesel engine cooled, injection diesel engine diesel engine Engine Model OM501LA ISUZU 6WA1 VOLVO D12C380 Output Power 290KW/1800rpm 265KW/2000rpm 279KW/1700~1800rpm Engine Max. Torque 1850Nm/1080rpm 1422Nm/1400rpm 1850Nm/1100~1300rpm Tail Gas Discharge Standard Euro II Euro II (Environmental Protection Type) (Environmental Protection Type) Euro III Capacity of Fuel Tank 400L (with oil-water separator) 410L (with oil-water separator) 410L (with oil-water separator) Discharge Capacity L L 12.11L Drive Mode Hydraulic Hydraulic Hydraulic Oil Cylinder Inner Diameter X Stroke Ф mm Ф mm Ф mm Delivery Cylinder Inner Diameter X Stroke Ф mm Ф mm Ф mm Valve Form S-valve S-valve S-valve Theoretical Discharge Capacity of Low pressure: 120m 3 /h Low pressure: 120m 3 /h Low pressure: 120m 3 /h Concrete High pressure: 67m 3 /h High pressure: 67m 3 /h High pressure: 67m 3 /h Theoretical Pumping Pressure High pressure: 11.8Mpa High pressure: 11.8Mpa High pressure: 11.8Mpa Low pressure: 6.38Mpa Low pressure: 6.38Mpa Low pressure: 6.38Mpa Pumping System Theoretical Pumping Times High pressure: 13times/min High pressure: 13times/min High pressure: 13times/min Low pressure: 24times/min Low pressure: 24times/min Low pressure: 24times/min High Pressure Pumping Horizontal 850m/125A pipe Horizontal 850m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Hopper Volume 0.6m 3 0.6m 3 0.6m 3 Material Feeding Height 1.44m 1.44m 1.43m System Oil Pressure 32MPa 32MPa 32MPa Slump 14cm~23cm 14cm~23cm 14cm~23cm Max. Aggregate Size 40mm 40mm 40mm Horizontal 850m/125A pipe Vertical 200m/125A pipe High-low Pressure Switch Automatic Automatic Automatic 9

14 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY 38M Truck-mounted Concrete Pumps Automatic control of engine s rotary speed for energy saving; Open-type hydraulic system with the fully hydraulic steering, the electrohydraulic cushion, and the differential pressure response, which provides high reliability and slight steering shocking; The pumping volume reaches 120m 3 /h, and the stepless control is adopted to meet various working conditions; Automatic retraction of concrete piston, which facilitates the checking and the replacing; The text display is adopted to show the operation parameters and the fault types. Also the multiple automatic protection system is equipped. 10

15 Main Technical Parameters for 38M Truck-mounted Concrete Pump Technical Parameters Model SY5291THB-38 Chassis Model ISUZU CXZ51Q/K/L Chassis Drive Model 6 4 Wheel Base The First Wheel Base 4595mm The Second Wheel Base 1310mm Track Front Wheel 2065mm Back Wheel 1855mm Tyre Dimension 295/80R22.5 Min. Turning Radius 9.2m Brake Distance 9.5m/30km/h Type 4 folded and fully-hydraulically controlled nodal arms Delivering Pipe Diameter DN125 Length of End Hose 3m Length 8950mm The First Nodal Arm Turning Angle 92 Length 8110mm The Second Nodal Arm Arm Support Turning Angle 180 The Third Nodal Arm Length 8230mm Turning Angle 180 The Fourth Nodal Arm Length 8330mm Turning Angle 245 Rotation Angle of Turning Table 365 Horizontal Length of Arm Support 33.62m Max. Vertical Height of Arm Support 37.60m Pressure of Hydraulic System 32MPa Lubricating Mode Central Lubrication, automatic lubrication by hydraulic oil Capacity of Hydraulic Oil Tank 900L Control Manual/Remote Control Max. Water Pressure of Water Pump 2MPa Capacity of Water Tank Cooling Mode of Hydraulic Oil Cleaning Mode of Concrete Pipe 600L Air Cooling Water Flushing Dead Weight Max. Speed Overall Dimension Engine Pumping System kg 80km/h Total Length 11830mm Total Width 2495mm Total Height 3910mm Engine Type In-line 6-cylinder, 4 strokes, surcharge, intercooling, direct-injection diesel engine Engine Model ISUZU 6WF1 Output Power 287KW/1800rpm Max. Torque 1863Nm/1100rpm Tail Gas Discharge Standard Euro II Gear Shifting Box Model MAG6W Discharge Capacity L Drive Mode Hydraulic Oil Cylinder Inner Diameter X Stroke φ140mm 2000mm Delivery Cylinder Inner Diameter X Stroke φ230mm 2000mm Valve Form S-valve Theoretical Discharge Capacity of Concrete Low pressure: 120m 3 /h High pressure: 67m 3 /h Theoretical Pumping Pressure High pressure: 11.8Mpa Low pressure: 6.38Mpa Theoretical Pumping Times High pressure: 13times/min Low pressure: 24times/min High Pressure Pumping Horizontal 850m/125A pipe Vertical 200m/125A pipe Hopper Volume 0.6m 3 Material Feeding Height 1.45m System Oil Pressure 32MPa Slump 14cm-23cm Max. Aggregate Size 40mm High-low Pressure Switch Automatic 11

16 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY 37M Truck-mounted Concrete Pumps Automatic control of engine s rotary speed for energy saving; Open-type hydraulic system with the fully hydraulic steering, the electrohydraulic cushion, and the differential pressure response, which provides high reliability and slight steering shocking; The pumping volume reaches 120m 3 /h, and the stepless control is adopted to meet various working conditions; Automatic retraction of concrete piston, which facilitates the checking and the replacing; The text display is adopted to show the operation parameters and the fault types. Also the multiple automatic protection system is equipped. 12

17 Main Technical Parameters for 37M Truck-mounted Concrete Pump Model Technical Parameters SY5270THB-37 SY5291THB-37 SY5292THB-37 SY5311THB-37 Chassis Model ISUZU CXZ 51Q/K/L ISUZU CXZ51Q/K/L BENZ Actros 3340 VOLVO FM12 Chassis Drive Model Wheel Base The First Wheel Base 4595mm 4595mm 4500mm 4900mm The Second Wheel Base 1310mm 1310mm 1350mm 1370mm Track Front Wheel 2065mm 2065mm 2034mm 2034mm Back Wheel 1855mm 1850mm 1804mm 1831mm Tyre Type 295/80R22.5RIB 295/80R22.5RIB 315/80R R20 Min. Turning Radius 9.2m 9.2m 9.9m 9.2m Brake Distance 9.5m/30km/h 9.5m/30km/h 10m/30km/h 8.5m/30km/h 4 folded and 4 folded and 4 folded and 4 folded and Type fully-hydraulically controlled nodal arms fully-hydraulically controlled nodal arms fully-hydraulically controlled nodal arms fully-hydraulically controlled nodal arms Delivering Pipe Diameter DN 125 DN 125 DN 125 DN 125 Length of End Hose 3m 3m 3m 3m The First Nodal Arm Length 8700mm 8700mm 8700mm 8700mm Turning Angle Length 7860mm 7860mm 7860mm 7860mm The Second Nodal Arm Arm Support Turning Angle The Third Nodal Arm Length 7980mm 7980mm 7980mm 7980mm Turning Angle The Fourth Nodal Arm Length 8080mm 8080mm 8080mm 8080mm Turning Angle Rotation Angle of Turning Table Horizontal Length of Arm Support 32.6m 32.62m 32.62m 32.62m Max. Vertical Height of Arm Support 36.6m 36.62m 36.6m 36.62m Pressure of Hydraulic System 32MPa 32MPa 32MPa 32MPa Lubricating Mode Manual grease lubrication, automatic lubrication by hydraulic oil Capacity of Hydraulic Oil Tank 800L 800L 800L 800L Control Manual/Remote control Manual/Remote control Manual/Remote control Manual/Remote control Max. Water Pressure of Water Pump 2MPa 2MPa 2MPa 2MPa Capacity of Water Tank 600L 600L 600L 600L Cooling Mode of Hydraulic Oil Air Cooling Air Cooling Air Cooling Air Cooling Cleaning Mode of Concrete Pipe Water Flushing/Drying Water Flushing/Drying Water Flushing/Drying Water Flushing Washing Washing Washing Dead Weight kg kg kg kg Max. Speed 80km/h 80km/h 80km/h 95km/h Total Length 11700mm 11500mm 11700mm 11950mm Overall Dimension Total Width 2495mm 2495mm 2495mm 2495mm Engine Pumping System Total Height 3910mm 3910mm 3920mm 3970mm 6 V-cylinders, 4 strokes, 4 strokes, in-line 6-cylinder, water cooled, water cooled, surcharge, Engine Type direct-injection diesel engine intercooling, automatic electronic diesel engine In-line 6-cylinder, turbo surcharge, intercooling, electronic-injection diesel engine Engine Model ISUZU 6WF1 ISUZU 6WF1 OM501LA D12 Output Power 287KW(390PS)/1800rpm 287KW(390PS)/1800rpm 290KW/1800rpm 279KW(380PS)/ rpm Max. Torque 1863Nm/1100rpm 1863Nm/1100rpm 1850Nm/1080rpm 1850Nm/1050~1300rpm Tail Gas Discharge Standard Euro II Euro II Euro II Euro III Capacity of Fuel Tank 400L (with oil-water 425L (with oil-water separator) separator) Discharge Capacity L L L 12.1L Drive Mode Hydraulic Hydraulic Hydraulic Hydraulic Oil Cylinder Inner Diameter X Stroke Φ 140mm 2000mm Φ 140mm 2000mm Φ 140mm 2000mm Φ 140mm 2000mm Delivery Cylinder Inner Diameter X Stroke Φ 230mm 2000mm Φ 230mm 2000mm Φ 230mm 2000mm Φ 230mm 2000mm Valve Form S-valve S-valve S-valve S-valve Theoretic Discharge Capacity of Low pressure: 120m 3 /h Low pressure: 120m 3 /h Low pressure: 120m 3 /h Low pressure: 120m 3 /h Concrete High pressure: 67m 3 /h High pressure: 67m 3 /h High pressure: 67m 3 /h High pressure: 67m 3 /h Theoretical Pumping Pressure High pressure: 11.8Mpa High pressure: 11.8Mpa High pressure: 11.8Mpa High pressure: 11.8Mpa Low pressure: 6.38Mpa Low pressure: 6.38Mpa Low pressure: 6.38Mpa Low pressure: 6.38Mpa Theoretical Pumping Times High pressure: 13times/min High pressure: 13times/min High pressure: 13times/min High pressure: 13times/min Low pressure: 24times/min Low pressure: 24times/min Low pressure: 24times/min Low pressure: 24times/min High Pressure Pumping Horizontal 850m/125A pipe Horizontal 850m/125A pipe Horizontal 850m/125A pipe Horizontal 850m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Vertical 200m/125A pipe Hopper Volume 0.6m 3 0.6m 3 0.6m 3 0.6m 3 Material Feeding Height 1.43m 1.43m 1.44m 1.43m System Oil Pressure 32MPa 32MPa 32MPa 32MPa Slump 14cm~23cm 14cm~23cm 14cm~23cm 14cm~23cm Max. Aggregate Size 40mm 40mm 40mm 40mm High-low Pressure Switch Automatic Automatic Automatic Automatic 13

18 QUALITY IS CHANGING THE WORLD 14

19 SERIES OF SANY TRAILER-MOUNTED CONCRETE PUMPS 15

20 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY S Valve III Diesel Engines Two types of concrete delivery methods of small delivery volume under high pressure and large delivery volume under low pressure; Hydraulic system adopts imported factory-assembled valve groups to control concrete pump with much higher reliability; Main electrical components, all imported factory-assembled, fully ensure high reliability of electrical control system; Distribution valve applies advanced S valve system with good seal performance, simple and reliable structure, and convenient replacement of wearing parts; The main oil pump with constant-power variable large delivery volume has high efficiency of main power under constant power; Blade, especially designed with little dead angle of agitation, can be fit for many kinds of concrete mix proportions; Due to its functions of automatic recession, the check and change of piston heads will be convenient and rapid; Especially designed hopper, with independent intellectual property rights, having little dead angle of agitation and small accumulated materials, could be cleaned easily; The text display with large screen which is operated in menu type could lessen operation buttons; The speed adjustment of the diesel engine automatically controlled by computers had gained the domestically exclusive patents; As the electro proportional controlling technology is introduced, the pumping displacement could be adjusted steplessly; With good maintainability, the assembly and disassembly of all wearing parts is very convenient. 16

21 Main Technical Parameters for Series of Trailer-mounted Concrete Pumps of S Valve III Diesel Engines Model Technical Parameters Theoretic Small delivery volume pressure under high pressure of concrete Large delivery volume delivery (Mpa) under low pressure Small delivery volume under high pressure Theoretic discharge capacity of concrete delivery (m 3 /h) Large delivery volume under low pressure HBT60C -1413DIII HBT60C -1816DIII HBT80C -2013DIII HBT80C -1818DIII Rated power of diesel engine (KW) Discharge capacity of main oil pump (ml/r) Theoretic Φ125mm Horizontal 700 Horizontal 850 Horizontal 700 Horizontal 1000 maximum Diameter of Vertical delivery distance delivery pipe Φ125mm Vertical 200 Vertical 250 Vertical (m) Maximum aggregate size (mm) Diameter of Φ150mm delivery pipe Φ125mm Diameter of delivery cylinder maximum stroke (mm) Φ Φ Φ Φ Hopper volume Material feeding height (m 3 /mm) Overall dimension length width height (mm) Total weight (Kg) Model Technical Parameters Theoretic Small delivery volume pressure under high pressure of concrete Large delivery volume delivery (Mpa) under low pressure Small delivery volume under high pressure Theoretic discharge capacity of concrete delivery (m 3 /h) Large delivery volume under low pressure HBT90C -2016DIII HBT100C -2118DIII HBT120C -2016DIII HBT120C -2120DIII Rated power of diesel engine (KW) Discharge capacity of main oil pump (ml/r) Theoretic Φ125mm Horizontal 850 Horizontal 1000 Horizontal 850 Horizontal 1350 maximum delivery distance (m) Diameter of delivery pipe Φ125mm Vertical 250 Vertical 320 Vertical 250 Vertical 380 Maximum aggregate size (mm) Diameter of Φ150mm delivery pipe Φ125mm Diameter of delivery cylinder maximum stroke (mm) Φ Φ Φ Φ Hopper volume Material feeding height (m 3 /mm) Overall dimension length width height (mm) Total weight (Kg)

22 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY S Valve III Motors Two types of concrete delivery methods of small delivery volume under high pressure and large delivery volume under low pressure; Hydraulic system adopts imported factory-assembled valve groups to control concrete pump with much higher reliability; Main electrical components, all imported factory-assembled, fully ensure high reliability of electrical control system; Distribution valve applies advanced S valve system with good seal performance, simple and reliable structure, and convenient replacement of wearing parts; The main oil pump with constant-power variable controlling has high efficiency of main power under constant power; Blade, especially designed with little dead angle of agitation, can be fit for many kinds of concrete mix proportions; Due to its functions of automatic recession, the check and change of piston heads will be convenient and rapid; Especially designed hopper, with independent intellectual property rights, having little dead angle of agitation and small accumulated materials, could be cleaned easily; The text display with large screen which is operated in menu type could lessen operation buttons; As the electro proportional controlling technology is introduced, the pumping displacement could be adjusted steplessly; With good maintainability, the assembly and disassembly of all wearing parts is very convenient. 18

23 Main Technical Parameters for Series of Trailer-mounted Concrete Pumps of S Valve III Motors Model Technical Parameters Small delivery volume under Theoretic pressure high pressure of concrete Large delivery volume under delivery (MPa) low pressure Theoretic Small delivery volume under discharge capacity high pressure of concrete Large delivery volume under delivery (m 3 /h) low pressure Rated power of motor (KW) Discharge capacity of main oil pump (ml/r) Theoretic maximum delivery distance (m) Maximum aggregate size (mm) HBT30C -1408III 19 HBT40C -1408III HBT50C -1413III Horizontal Horizontal Horizontal Φ125mm Diameter of delivery pipe Vertical Vertical Vertical Φ125mm Diameter of Φ150mm delivery pipe Φ125mm Diameter of delivery cylinder maximum stroke (mm) Φ Φ Φ Hopper volume Material feeding height (m 3 /mm) Power supply voltage/frequency (V/Hz) 380/50 380/50 380/50 Overall dimension length width height (mm) Total weight (Kg) Model Technical Parameters Theoretic Small delivery volume under pressure high pressure of concrete Large delivery volume under delivery (Mpa) low pressure Small delivery volume under high pressure Theoretic discharge capacity of concrete delivery (m 3 /h) Large delivery volume under low pressure HBT60C -1810III HBT60C -1816III HBT80C -1816III HBT80C -2013III Rated power of motor (KW) Discharge capacity of main oil pump (ml/r) Horizontal Horizontal Horizontal Horizontal Theoretic Φ125mm Diameter of maximum delivery delivery pipe Vertical Vertical Vertical Vertical distance (m) Φ125mm Maximum Φ150mm Diameter of aggregate size delivery pipe Φ125mm (mm) Diameter of delivery cylinder maximum stroke (mm) Φ Φ Φ Φ Hopper volume Material feeding height (m 3 /mm) Power supply voltage/frequency (V/Hz) 380/50 380/50 380/50 380/50 Overall dimension length width height (mm) Total weight (Kg)

24 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY Slide Valve III Trailer-mounted Concrete Pumps Hydraulic system adopts imported factory-assembled valve groups to control concrete pump with much higher reliability; Main electrical components, all imported factory-assembled, fully ensure high reliability of electrical control system; As the inclined-mounted slide valve is adopted as the distribution valve, the capacity of material-suction is good, and the work is reliable; The main oil pump with constant-power variable large delivery volume has high efficiency of main power under constant power; Blade, especially designed with little dead angle of agitation, can be fit for many kinds of concrete mix proportions; Due to its functions of automatic recession, the check and change of piston heads will be convenient and rapid; The text display with large screen which is operated in menu type could lessen operation buttons; and the protection level of the electric control box reaches Grade-IP65; The speed adjustment of the diesel engine automatically controlled by computers had gained the domestically exclusive patents; As the electro proportional controlling technology is introduced, the pumping displacement could be adjusted steplessly; With good maintainability, the assembly and disassembly of all wearing parts is very convenient. 20

25 Main Technical Parameters for Slide Valve III Trailer-mounted Concrete Pump Technical Parameters Model HBT60A -1406DIII HBT60A -1406III HBT80A -1808DIII Concrete distribution valve Inclined-mounted slide valve Theoretic pressure of concrete delivery (MPa) Theoretic discharge capacity of concrete delivery (m 3 /h) Theoretic maximum delivery distance Maximum aggregate size (mm) Diameter of delivery pipe Φ125mm Horizontal 400 Horizontal 400 Horizontal 500 Φ125mm Vertical Vertical Diameter of Φ150mm delivery pipe Φ125mm Diameter of delivery cylinder maximum stroke (mm) Hopper volume Material feeding height (m 3 /mm) Theoretic cleaning water pump capacity/ discharge pressure/ discharge capacity MPa/(L/min) Vertical 130 Φ Φ Φ /95 8/95 8/95 Engine/power (Kw) Diesel engine/112 Motor/75 Diesel engine/112 Discharge capacity of main oil pump (ml/r) Overall dimension length width height (mm) Total weight (Kg) Diesel Engine Electric Control Box Valve Group 21

26 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY Third-gradation Concrete Pumps The unique double-agitation-shaft system with forced material-feeding is completely different from other current mixing systems of the concrete pump; Firstly-developed patent technology of computer-controlled diesel engine rotation speed to effectively improve emission, decrease noises, realize idly rotation speed controlling, decrease fuel consumptions, improve starting performance in low temperature and overheating protection for engines, as well as fully develop efficiencies of engines; As the computer-controlled proportion technology is adopted, the stepless regulation is realized in the pumping speed, and the pumping displacement could be adjusted easily according to real construction conditions; The open hydraulic circuit with full hydraulic steering and electro-hydraulic proportional buffer system is adopted. The full hydraulic steering is the patent technology of SANY Heavy Industry Limited Company, it can not only simplify the system, but also improve the reliability; PLC controlling is adopted for the electrical control system, as many automatic protection modes are set into the control program, the incorrect operation is denied and the reliability of the system is strengthened. 22

27 Main Technical Parameters for Third-gradation Concrete Pump Model HBT120A-1410D Technical Parameters Theoretic pressure of concrete delivery (MPa) 10.5 Theoretic. concrete delivery volume (m 3 /h) 121 Rated power of diesel engine (KW) Discharge capacity of main oil pump (cm 3 ) Theoretic maximum delivery distance m (260mm pipe) Horizontal 800 Vertical 100 Maximum aggregate size (mm) 80 Diameter of delivery cylinder maximum stroke (mm) Φ Hopper volume (m 3 ) 0.9 Material feeding height (mm) 2180 Overall dimension (mm) Total weight (Kg) Main Configuration The factory-packed Deutz product imported from Germany is adopted for the diesel engine; All the hydraulic components are imported with original packaging, and the international famous brand-- REXROTH imported with original packaging is adopted for the main oil pump; The factory-packed USA Vikers valve group is adopted for the hydraulic valve; The imported factory-packed products from Japan Mitsubishi, Omron and Germany Siemens are adopted for the main electrical elements. Valve Group Diesel Engine 23

28 QUALITY IS CHANGING THE WORLD 24

29 SANY CONCRETE MIXER TRUCK 25

30 THE ESSENCE OF SANY BRAND LIES IN ITS HIGH RELIABILITY Series of SANY Concrete Mixer Truck The capacious design of mixing tank to make it own relatively large loading and mixing space; The relatively low center of gravity to guarantee high stability and good safety at driving; The forged raceway of mixing tank after complete machine work ensures concentricity; Optimal design made on the shape of blade, its layout and position in the mixing tank to ensure feedstock and discharge at high speed and low residue ratio of discharge. And no phenomenon of segregation has occurred. The control handle of mixing tank equipped at the left and right sides and in the cab, to make the operation easy and convenient. The mixing tank shell and blades made of the special materials are characterized by relatively high abrasion resistance. 26

31 Main Technical Parameters for Series of Concrete Mixer Truck Model SY5250GJB SY5251GJB SY5252GJB SY5256GJB SY5257GJB Technical Parameters Chassis Model SANY HQC1250T SANY HQC1250JB HINO FM2PKU ISUZU CXZ51K ISUZU CXZ51L Full-load Overall Mass (kg) Overall Mass (kg) Wheel Base (mm) Contour Dimension (mm) 8700x2490x x2495x x2490x x2490x x2490x3900 Full load under Maximum Speed (km/h) Minimum Ground Clearance (mm) Minimum Turning Radius (m) Maximum Gradeability (%) Oil Consumption Per 100km (L/100km) (Average Speed as km/h) Skidding Distance (m) at an Initial Speed of 50km/h Engine Type In-line 6 cylinders, water In-line 6 cylinders, In-line 6 cylinders, In-line 6 cylinders, cooling & direct injection diesel water cooling, water cooling, In-line 6 cylinders, water cooling, engine equipped with supercharge supercharge water cooling, supercharge turbocharge and midship inter-cooling, direct inter-cooling, direct diesel engine inter-cooling, diesel cooler as well as overhead injection diesel engine injection diesel engine engine camshaft Engine Model P11C-UL Cat-Shanghai (6C260-2) HINO P11C UB 6WF1 6WF1 Displacement Volume (L) Rated Power (Kw/rpm) 259/2100(352PS) 192/2200(261PS) 230/2150(312PS) 287/1800(390PS) 287/1800(390PS) Maximum Torque (N m/rpm) 1460/ /(1350~1500) 1127/ /1100(190kgm) 1863/1100(190kgm) Geometric Volume of Rotary Drum (m 3 ) Effective Volume (m 3 ) Inclination Angle of Mixing Tank Feedstock Speed (m 3 /min) Discharge Speed (m 3 /min) Output Residue Rate (%) <1 <1 <1 <1 <1 Speed Reducer PMB6SP PMB6SP PMB6SP (PLM9) PMB6SP (PLM9) PMB7SP (PLM9) Plunger pump Plunger pump Pump Plunger pump Plunger pump A4VTG71HW/32R Plunger pump (A4VTG71HW/32R) A4VTG71HW/32R A4VTG71HW/32R (Plunger pump A4VTG71HW/32R (Plunger pump A4VTG90HW/32R) A4VTG90HW/32R) Motor AA2FM80/61W AA2FM80/61W AA2FM80/61W AA2FM80/61W AA2FM80/61W Water Tank Volume (L) Water-Supply Mode By electrical water-pump By electrical water-pump 27 By electrical water-pump By electrical water-pump By electrical water-pump

32 QUALITY IS CHANGING THE WORLD 28

33 SANY CONCRETE PLACING BOOM 29

34 Series of HG Concrete Placing Boom 30

35 Brief Introduction to Series of HG Concrete Placing Boom SANY- Series of HG Concrete Placing Boom have been developed based on the advanced finite element analysis and dynamics analysis, and using the newest materials (to ensure sufficient anti-dumping moment) and control techniques; at the same time, it is the only one elaborate product which is fully independent in research and development in China, as well as owns independent intellectual property. It can be perfectly matched with concrete pump, trailer mounted pump, truck mounted pump and so on to improve the working efficiency, and reduce manpower cost, which is the reliable product to ensure the quality of concrete placement; meanwhile, it is able to effectively distribute and pave the concrete which is not subject to the compacts from environment and construction height, it is a ideal equipment to achieve perfect concrete placement. The Plan to HG Concrete Placing Boom Fixed Type Gear-escalation Type HG32C Oil Cylinder Jack-up Type Advantages of SANY Concrete Placing Boom Aiming at the huge discharge capacity of concrete in construction, the design parameter is improved to meet the demand of huge concrete pumping. The optimum design of arm is done advanced designing means, such as, finite element analysis of computer, dynamics emulate, model analysis, etc. To ensure the safety and reliability of the protective arm, and erecting fixed column the high strength steel imported from Sweden and the imported high strength welding materials were used in manufacture and also nondestructive tasting was employed to check the manufacturing quality. The hot treatment for overall arm and fixed column can control residual stress and deformation. Impulse is decreased by the induction control of differential pressure, electro-hydraulic proportion control, steering buffer, and slope control that make the arms have a smooth operation. The balancing value imported can effectively ensure the smooth moving of arm and to avoid such case happen that the suddenly raised pressure in the oil cylinder damages the arm due to the foreign impacts, as a results, the security is improved; Two operation ways of near control and remote control, the wireless remote control system with a remote distance of 100m which is produced by famous company- German HBC is adopted, and the system have four frequency ranges for option to ensure exact operation, as well as to strengthen the remote capacity for the equipment. 31