SHOCK-STOPPER BULB REPLACEABLE NO COSTLY THROW AWAY!! ONLY A BULB NO BAD GROUNDING NO CORROSION FAST LOW COST SERVICE LOCK & SEAL PLUGS

Size: px

Start display at page:

Download "SHOCK-STOPPER BULB REPLACEABLE NO COSTLY THROW AWAY!! ONLY A BULB NO BAD GROUNDING NO CORROSION FAST LOW COST SERVICE LOCK & SEAL PLUGS"

Ada Marsh
6 years ago
Views:

all the advantages of the Solid Wiring system plus.

common grounding. The wires inside the cable are protected by a PVC insulation and further protected by a super tough PVC outer jacket that resists salt, abrasion, and physical abuse.

Should the Plug & Seal Lighting System suffer damage from tire blowouts or accidents, the damaged pigtail can be completely replaced without jeopardizing the integrity of the system.

It all adds up to an exclusive, high integrity lighting system. A lighting system that is easy to maintain at a cost you can live with. ulb replaceable lighting systems cost less per mile to maintain.

NOTE: Heat shrink tubing should be applied to the plugs for total sealing. NO COSTLY THROW AWAY!! ONLY A UL Ready-to-Install kits can be engineered by etts to customer specifications.

1 all the advantages of the Solid Wiring system plus... the easy installation and service of plug-together units The Plug & Seal Lighting System offers lamps and junction boxes prewired with a flexible jacketed cable which includes a ground wire for common grounding. The wires inside the cable are protected by a PVC insulation and further protected by a super tough PVC outer jacket that resists salt, abrasion, and physical abuse. Plug & Seal Lighting System features replaceable molded plug pigtails that provide a sealed connection and offer field serviceability not afforded or offered by any other system on the market. Should the Plug & Seal Lighting System suffer damage from tire blowouts or accidents, the damaged pigtail can be completely replaced without jeopardizing the integrity of the system. Other systems require cutting into the harness to remove the damaged section and splicing on a new section. Poor splices can and will result in lighting problems. It all adds up to an exclusive, high integrity lighting system. A lighting system that is easy to maintain at a cost you can live with. ulb replaceable lighting systems cost less per mile to maintain. NOTE: To replace the bulb, grasp the base of the J-slotted Shock-Stopper socket with one hand, push the bulb down and turn counter clockwise to remove. NOTE: Heat shrink tubing should be applied to the plugs for total sealing. NO COSTLY THROW AWAY!! ONLY A UL Ready-to-Install kits can be engineered by etts to customer specifications. Information on pages, 5, 6, & 7 will also allow for the purchase of individual components to be put together as a kit in your facility SHOCK-STOPPER Protects the bulb from road 6 shock and vibration. Enables bulb to reach its rated life. UL REPLACEALE Uses a standard J-slot bulb. NO AD GROUNDING System uses common grounding. NO CORROSION Super-tight seals & plugs keep moisture out. FAST LOW COST SERVICE Snap-Seal lens make service easy. LOCK & SEAL PLUGS Molded to tough PVC jacketed cable.

etts harness units are designed to speed installation and service while maintaining a sealed lighting system with dry environment connections.

2 etts harness units are designed to speed installation and service while maintaining a sealed lighting system with dry environment connections. Male and female and conductor plugs use a sealed lock together system that really works. Remember, most service problems can be resolved for the cost of a bulb... not an expensive lamp unit. NOSE OX 905 E ID AR 90 D CLR/SIDE MARKER A ROADSIDE C MAIN CUR SIDE DRI-SEAL JUNCTION OX

Plug & Seal Harnesses 9000 900 A ROADSIDE HARNESS 0 foot lead of 5 conductor cable molded into a junction that has drops consisting of; # - conductor plug wired for clearance, # - conductor plug

CURSIDE HARNESS 0 foot lead of 5 conductor cable molded into a junction that has drops consisting of; # - conductor plug wired for clearance, # - conductor plug 900 CURSIDE/ROADSIDE HARNESS 8 foot

(Lamps will be wired for stop or turn functions.) # - have 6" length of cable.

3 Plug & Seal Harnesses A ROADSIDE HARNESS 0 foot lead of 5 conductor cable molded into a junction that has drops consisting of; # - conductor plug wired for clearance, # - conductor plug wired as turn/tail, # - conductor plug wired as backup, and # - conductor plug wired as stop/tail. #, & have 6" length of cable. # - ". CURSIDE HARNESS 0 foot lead of 5 conductor cable molded into a junction that has drops consisting of; # - conductor plug wired for clearance, # - conductor plug wired as turn/tail, # - conductor plug wired as backup, and # - conductor plug wired as stop/tail. #, & have 6" length of cable. # - ". 900 CURSIDE/ROADSIDE HARNESS 8 foot lead of conductor cable molded into a junction that has drops consisting of; # - conductor plug wired for clearance, #,# # - conductor plugs wired as stop/turn/tail. (Lamps will be wired for stop or turn functions.) # - have 6" length of cable. Wiring functions as follows: Red - Stop rown - Tail/Marker Yellow/Green - Turn White - Ground 9006 CURSIDE/ROADSIDE HARNESS 8 foot lead of conductor cable molded into a junction that has drops consisting of; # - conductor plug wired for clearance, # and #, - conductor plugs wired as stop/turn/tail. (Lamps will be wired for stop or turn functions.) # - have 6" length of cable. Wiring functions as follows: Red - Stop rown - Tail/Marker Yellow/Green - Turn White - Ground C MAIN HARNESS: foot lead of 7 conductor cable with a junction molded in the center with () - conductor drops consisting of # drop wired for roadside turn/clearance and # wired for curbside turn and clearance. # & have foot length of cable. Same as 900 but with AS cable. 90 D TWO CONDUCTOR Y HARNESS 96 inch lead of conductor cable molded into a junction with () - 6 inch conductor drops wired for clearance/side marker. 905 E ID AR HARNESS 6 inch lead of conductor cable with Y harnesses that provide three two conductor drops to plug in individual lights to make an ID bar light C MAIN HARNESS: foot lead of 7 conductor cable with a junction molded feet from the front with () - conductor drops consisting of # drop wired for roadside turn/clearance and # wired for curbside turn and clearance and 7 feet of cable to the rear. # & have.5 foot length of cable. Same as 906 but with AS 7 conductor cable. 5

4 Stop,Tail, Turn & License Lamps All lamps are equipped with PVC jacketed cable and a molded conductor male plug. Wiring conforms to FMVSS standards. All Lenses are red and all lamps are provided with double contact bulbs and sockets. Cable entry is located on the side of most lamp bodies for easy plug-in to the lamp system. Note: Amber turns and clear back-ups are available upon request. Plug Shown IN. MALE PLUG/ COND. CALE IN. MALE PLUG/ COND. CALE /LIC 009 /LIC 0008 /LIC 0009 /LIC /LIC 5008 /LIC /LIC 5009 /LIC

5 Clear/Mark, Side Turn & Junction ox All lamps are equipped with PVC jacketed cable and a molded or conductor male plug. Cable entry is located in the rear of lamp bodies for easy plug-in to the lamp system. See page for I.D. lamps with 8 feet of cable that can be connected thru the junction box. IN. MALE PLUG/ COND. CALE 0 Clear/Marker - Red 05 Clear/Marker - Amber IN. MALE PLUG/ COND. CALE 06 Clear/Marker - Red 07 Clear/Marker - Amber 5600 Clear/Marker - Red 5600 Clear/Marker - Amber Clear/Marker - Red Clear/Marker - Amber Clear/Marker - Red Clear/Marker - Amber Clear/Marker - Red Clear/Marker - Amber Clear/Marker - Red Clear/Marker - Amber 6500 Clear/Marker - Red 6500 Clear/Marker - Amber Curb Side 7700 Arrow Turn/Amber Road Side Arrow Turn/Amber IN. MALE PLUG/ COND. CALE Oval Side Turn/Marker Oval Side Turn/Marker - IN. MALE PLUG/ COND. CALE 5600 Side Turn/Marker Side Turn/Marker - IN. MALE PLUG/ COND. CALE 7006 Oval Side Turn/Marker Oval Side Turn/Marker - IN. MALE PLUG/ COND. CALE Side Turn/Marker Side Turn/Marker - 7

Stop,Tail, Turn Lamps All lamps are equipped with PVC jacketed cable and a molded conductor male plug.

Cable entry is located on the side of most lamp bodies for easy plug-in to the lamp system.

6 Stop,Tail, Turn Lamps All lamps are equipped with PVC jacketed cable and a molded conductor male plug. Wiring conforms to FMVSS standards. Cable entry is located on the side of most lamp bodies for easy plug-in to the lamp system. Note: Amber turns are available upon request. LED S IN. MALE PLUG/ COND. CALE IN. MALE PLUG/ COND. CALE MULTI VOLTAGE OVAL AMER SIDE TURN MARKER MULTI VOLTAGE OVAL AMER SIDE TURN MARKER

Clear/Marker Lamps & Junction ox All lamps are equipped with PVC jacketed cable and a molded conductor male plug.

560 Clear/Marker - Amber 5607 Clear/Marker - Red 5608 Clear/Marker - Amber 5605 Clear/Marker - Red 5606

- Amber 650 Clear/Marker - Red 650 Clear/Marker - Amber 506 x8 Junction ox with cable fittings and Choke Seals

7 Clear/Marker Lamps & Junction ox All lamps are equipped with PVC jacketed cable and a molded conductor male plug. Cable entry is located in the rear of lamp bodies for easy plug-in to the lamp system. IN. MALE PLUG/ COND. CALE LED S IN. MALE PLUG/ COND. CALE Clear/Marker - Red 5 Clear/Marker - Amber 6 Clear/Marker - Red 7 Clear/Marker - Amber 560 Clear/Marker - Red 560 Clear/Marker - Amber 5607 Clear/Marker - Red 5608 Clear/Marker - Amber 5605 Clear/Marker - Red 5606 Clear/Marker - Amber 5609 Clear/Marker - Red Clear/Marker - Amber 6509 Clear/Marker - Red 6500 Clear/Marker - Amber 650 Clear/Marker - Red 650 Clear/Marker - Amber 506 x8 Junction ox with cable fittings and Choke Seals Junction box is provided with () 907 and () 908 cable entrance fittings. Also () 90 and () 900 cable Choke Seals. IN. MALE PLUG/ COND. CALE 770 Arrow Turn - Amber IN. MALE PLUG/ COND. CALE 7706 Arrow Turn - Amber 9

heavy duty vehicular lamps and lighting systems

heavy duty vehicular lamps and lighting systems TM SINCE 1901 CATALOG 2001 8-1 INDEX LAMPS ACCESSORIES PARTS ABS STICKER...50 ACCESSORIES...50-51 ARMOR GUARD...61 BACK-UP LAMPS...22 BRACKETS...60-61 BSXL