SALCO PRODUCTS IS LOW VOLUME IRRIGATION. SINCE 1967.

Transcription

1 SALCO PRODUCTS IS IRRIGATION. SINCE PRODUCT CATALOG 2015 Dripline Swingpipe, Assemblies and Fittings Pressure Compensating Emitters Stakes Risers Filters Tubing Low Volume Accessories

2 TABLE OF CONTENTS 6mm Dripline Page 1 17mm Dripline/17mm Distribution Tubing/17mm Fittings Page 2 17mm Dripline with Check Valve Page 3 Pro-Spec Emitters/Barbed, Threaded, Multi-Outlet Page 4-5 D2 Dirty Water Emitters/Single and Multi-Outlet Page 6 IH Series Risers Page 7 Tubing Stakes and Risers Page 8 Wye Filters/Spintech Filters Page 9 Pressure Regulating Filters Page 10 3/4 and 1 Disc/Screen Filters Page Disc/Screen Filters Page 12 Adapters and Manifolds Page 13 PE and Vinyl Distribution Tubing/IPS Hose Page 14 Bluetooth Hose End Timer and Accessories Page 15 SPRINKLER ACCESSORIES Swing Pipe/Swing Fittings/Swing Assemblies Page 16 REFERENCE Friction Loss Tables Page 17-20

3 6mm MICRO DRIPLINE Inlet filter to prevent particles from entering emitter labyrinth Turbulent flow, large labyrinth, and two outlets per emitter help prevent clogging Flexible tuing for easy installation Ideal for containers and narrow plantings Use with ¼ barbed fittings SPECIFICATIONS Linear low-density polyethylene Size:.170 ID x.240 OD (1/4 ) Operating Pressure: 10 to 25 PSI Flow rate: 0.52 GPH at 15 PSI Spacing: 6 or 12 Minimum bend radius: 1 Filter requirement: 150 mesh/100 micron minimum Colors: black or brown Pressure vs. Flow Pressure (PSI) Flow (GPH) Maximum Lateral Length Pressure (PSI) 6 Spacing 12 Spacing Flow Rate (GPH) ft. 32 ft ft. 41 ft ft. 49 ft SLV-SIL B SLV-SIL B SLV-SIL SLV-SIL How to Specify Description 6MM INLINE TUBING 0.5GPH 6 SPACING 100 COIL, BLACK 6MM INLINE TUBING 0.5GPH 12 SPACING 100 COIL, BLACK 6MM INLINE TUBING 0.5GPH 6 SPACING 100 COIL, BROWN 6MM INLINE TUBING 0.5GPH 12 SPACING 100 COIL, BROWN PAGE 1

4 17MM DRIPLINE 17mm PRESSURE COMPENSATING DRIPLINE Pressure compensating for uniform, even watering over a range of operating pressures Wide flow path and circular pool for extended life in subsurface applications Tubing material: highest quality, UV stabilized linear low-density polyethylene Continuous self-flushing emitter design Two emitter inlet filters to resist internal clogging Dual emitter outlets double resistance to clogging and provide a redundant flow path Inline spacing of 12, 18 or 24 Three coil lengths: 100, 500 or year warranty Meets or exceeds ISO standard 9261 SLV-SIL Recycled/Reclaimed Water Tubing may be specified by adding -NP suffix. SLV-SIL Dripper Spacing (in) 12" 18" 24" Dripper Flow Rate (gph) mm Inlet pressure MAXIMUM LATERAL DISTANCE (FEET) Dripper Spacing (m) 0,31 0,46 0,61 Dripper Flow Rate (lph) 2,3 3,4 2,3 3,4 2,3 3,4 17 mm Inlet pressure MAXIMUM LATERAL DISTANCE (METERS) ,0 53,3 98,1 75,3 123,4 93, ,1 72,5 133,5 102,1 168,6 128, ,3 85,0 156,7 120,1 197,8 151, ,1 94,8 175,0 133,8 221,0 169,2 17 mm PRESSURE COMPENSATING EMITTER OPERATING RANGE Flow rates: 0.6 or 0.9 gph Pressure compensating: range Zone filtration: 120 mesh/125 micron STANDARD Flow gph Spacing in Coil Length ft 1000' METRIC Flow lph Spacing m Coil Length m 304,8 SLV-SIL " 500' 2,3 0,31 152,4 SLV-SIL ' 30,5 1000' 304,8 SLV-SIL " 500' 2,3 0,46 152,4 SLV-SIL ' 30,5 SLV-SIL ' 304,8 SLV-SIL " 500' 2,3 0,61 152,4 SLV-SIL ' 30,5 SLV-SIL ' 304,8 SLV-SIL " 500' 3,4 0,31 152,4 SLV-SIL ' 30,5 SLV-SIL ' 304,8 SLV-SIL " 500' 3,4 0,46 152,4 SLV-SIL ' 30,5 SLV-SIL ' 304,8 SLV-SIL " 500' 3,4 0,61 152,4 SLV-SIL ' 30,5 17MM POLYETHYLENE DISTRIBUTION TUBING Standardizes fitting and tubing inventories and simplifies installation Attractive brown color blends with the landscape Compatible with 17 mm barbed insert fittings Coil Length (feet) SLV-PE-17MM ' SLV-PE-17MM ' SLV-PE-17MM ,000' 17MM FITTINGS Easy insertion without use of glue or clamps SLV-IMAD MM Multiple barbs prevents blow-outs Hard thermoplastic material for sharper barbs Maximum 50 (3,4 bar) operation pressure Compatible with all SLV-ITEE-17MM 17 mm brands SLV-IMAD MM SLV-ICOUP-17MM Description SPACING CODE FLOW RATE SLV-ICOUP-17MM SLV-IELBOW-17MM 17 mm Coupling 17 mm Elbow 12 or 0,31m = 18 or 0,46m = 24 or 0,61m =.06 gph or 2,3 lph.09 gph or 3,4 lph SLV-ITEE-17MM SLV-IMAD MM SLV-IMAD MM 17 mm Tee 17 mm ½" MIPT Adapter 17 mm ¾" MIPT Adapter SLV-IELBOW-17MM PAGE 2

5 17mm DRIPLINE WITH CHECK VALVE Can be installed above or below grade Inline emitter check valve prevents drainage from dripline below 2.5PSI and siphoning of soil particles Pressure compensation provides uniform flow over the length of the line Flexible tubing for easy installation Self-flushing silicone diaphragm helps prevent clogging Use with 17mm barbed fittings SPECIFICATIONS Linear low-density polyethylene UV resistant Size:.570 ID x.670 OD (1/2 ) Operating Pressure: 12 to 50 PSI Flow rate: 0.6 GPH and 0.9 GPH Spacing: 12 or 18 Check valve opening pressure: 4.3 PSI Check valve closing pressure: 2.5 PSI Minimum bend radius: 1 Filter requirement: 150 mesh/100 micron minimum Flow Rate: 0.6 GPH Flow Rate per 100 ft. Emitter Spacing Flow (GPM) Flow (GPH) Flow Rate: 0.9 GPH Flow Rate per 100 ft. Emitter Spacing Flow (GPM) Flow (GPH) Flow Rate: 0.6 GPH Maximum Lateral Length Pressure (PSI) 12 Spacing 18 Spacing ft. 244 ft ft. 406 ft ft. 459 ft ft. 548 ft. Flow Rate: 0.9 GPH Maximum Lateral Length Pressure (PSI) 12 Spacing 18 Spacing ft. 221 ft ft. 294 ft ft. 347 ft ft. 413 ft. How to Specify SLV-SIL CV SLV-SIL CV SLV-SIL CV SLV-SIL CV SLV-SIL CV SLV-SIL CV SLV-SIL CV SLV-SIL CV Description 17MM INLINE TUBING 0.6GPH 12 SPACING 100 COIL, CV 17MM INLINE TUBING 0.6GPH 12 SPACING 500 COIL, CV 17MM INLINE TUBING 0.6GPH 18 SPACING 100 COIL, CV 17MM INLINE TUBING 0.6GPH 18 SPACING 500 COIL, CV 17MM INLINE TUBING 0.9GPH 12 SPACING 100 COIL, CV 17MM INLINE TUBING 0.9GPH 12 SPACING 500 COIL, CV 17MM INLINE TUBING 0.9GPH 18 SPACING 100 COIL, CV 17MM INLINE TUBING 0.9GPH 18 SPACING 500 COIL, CV PAGE 3

6 THE PRO SPEC FIVE Consider 5 Reasons why the Pro-Spec Family of Emitters is THE Architects Choice! PRO-SPEC EMITTER 1 TRUCHECK TECHNOLOGY 5 COLOR CONFIGURATIONS Salco Trucheck technology ensures your emitters will operate at the highest level of performance and efficiency. The only emitter with a positive internal check spring, Pro-Spec PST-CV emitters hold back 9.25' (2,77 m) long after the competitors lose their checking power. Color coded and labeled for GPH or camouflaged to blend with the landscape Easily identify emitters on the job or in the box CAMOUFLAGE MULCH DESERT GRANITE NON-POTABLE 0.5 GPH 1 GPH 2 GPH 4 GPH 2 EASY INSTALLATION OPTIONS ½" FIPT threads ¼" x ¼" barbs Single or multi-outlet Check or non-check models 1 3 SLV-PS AT GRADE 1. BUG CAP 2. UVR PLASTIC TUBING STAKE 3. DISTRIBUTION TUBING 4. PRO-SPEC SINGLE-OUTLET BARBED EMITTER 5. PVC FLEX HOSE 6. PVC COATED GALVANIZED TUBING STAKE WIDEST OPERATING RANGE 2 6 PC Flow: 0.5, 1, 2, or 4 gph Pressure Range: 5 65 Zone Filtration: Mesh 1 3 SLV-PS6 AT GRADE 1. BUG CAP 2. UVR PLASTIC TUBING STAKE 3. DISTRIBUTION TUBING 4. PRO-SPEC MULTI-OUTLET BARBED EMITTER 5. PVC FLEX HOSE 6. PVC COATED GALVANIZED TUBING STAKE 4 ZERO FLUSH PERFORMANCE 4 5 Minimizes water waste Highly efficient hydraulic design Run more emitters on a single line 2 6 PAGE 4

7 PRO-SPEC EMITTER PRO-SPEC EMITTERS Fully pressure-compensating zero flush design delivers uniform flow throughout a wide pressure range (5 65 ), regardless of elevation changes and pressure inconsistencies Optional Trucheck models (PST-CV) include positive internal check spring to hold back 9.25 (2,77 m) of elevated water ½ FIPT (PST) or ¼ barbed base (PS) configuration to handle every design situation Available in color-coded flow rates of 0.5, 1, 2 and 4 gph, or camouflage colors of desert, granite or mulch Flow rate and flow direction are clearly molded into diffuser cap Manufactured from UV-inhibited engineering grade plastics rugged design ensures maximum life span Barbed emitters are compatible with PVC or polyethylene tubing. ½ FIPT are compatible with all standard ½ MIPT fittings. OPERATING RANGE PC Flow: gph Pressure: 5 65 Filtration: mesh PRO-SPEC PERFORMANCE ZERO FLUSH Discharge (gph) PS6T (THREADED) Pressure (kpa) SLV-PST-1 (THREADED) GPH Emitter 2.0 GPH Emitter 1.0 GPH Emitter 0.5 GPH Emitter Pressure () 15,0 10,0 5,0 Discharge (lph) PS EMITTERS (BARBED) PRO-SPEC SPECIFICATIONS (Single Outlet) Without Trucheck With Trucheck Flow Rate Color Inlet SLV-PS-05 ½ gph Brown Barbed SLV-PS-1 1 gph Black Barbed SLV-PS-2 2 gph Green Barbed SLV-PS-4 4 gph Red Barbed SLV-PST-05 SLV-PST-CV-05 ½ gph Brown ½" FIPT SLV-PST-1 SLV-PST-CV-1 1 gph Black ½" FIPT SLV-PST-2 SLV-PST-CV-2 2 gph Green ½" FIPT SLV-PST-4 SLV-PST-CV-4 4 gph Red ½" FIPT SLV-PSG-05 ½ gph Granite Camo Barbed SLV-PSG-1 1 gph Granite Camo Barbed SLV-PSG-2 2 gph Granite Camo Barbed SLV-PSG-4 4 gph Granite Camo Barbed SLV-PSTG-05 SLV-PSTG-CV-05 ½ gph Granite Camo ½" FIPT SLV-PSTG-1 SLV-PSTG-CV-1 1 gph Granite Camo ½" FIPT SLV-PSTG-2 SLV-PSTG-CV-2 2 gph Granite Camo ½" FIPT SLV-PSTG-4 SLV-PSTG-CV-4 4 gph Granite Camo ½" FIPT SLV-PSD-05 ½ gph Desert Camo Barbed SLV-PSD-1 1 gph Desert Camo Barbed SLV-PSD-2 2 gph Desert Camo Barbed SLV-PSD-4 4 gph Desert Camo Barbed SLV-PSTD-05 SLV-PSTD-CV-05 ½ gph Desert Camo ½" FIPT SLV-PSTD-1 SLV-PSTD-CV-1 1 gph Desert Camo ½" FIPT SLV-PSTD-2 SLV-PSTD-CV-2 2 gph Desert Camo ½" FIPT SLV-PSTD-4 SLV-PSTD-CV-4 4 gph Desert Camo ½" FIPT SLV-PSM-05 ½ gph Mulch Camo Barbed SLV-PSM-1 1 gph Mulch Camo Barbed SLV-PSM-2 2 gph Mulch Camo Barbed SLV-PSM-4 4 gph Mulch Camo Barbed SLV-PSTM-05 SLV-PSTM-CV-05 ½ gph Mulch Camo ½" FIPT SLV-PSTM-1 SLV-PSTM-CV-1 1 gph Mulch Camo ½" FIPT SLV-PSTM-2 SLV-PSTM-CV-2 2 gph Mulch Camo ½" FIPT SLV-PSTM-4 SLV-PSTM-CV-4 4 gph Mulch Camo ½" FIPT SLV-PSR-05 ½ gph Non-Potable Purple Barbed SLV-PSR-1 1 gph Non-Potable Purple Barbed SLV-PSR-2 2 gph Non-Potable Purple Barbed SLV-PSR-4 4 gph Non-Potable Purple Barbed SLV-PSTR-05 SLV-PSTR-CV-05 ½ gph Non-Potable Purple ½" FIPT SLV-PSTR-1 SLV-PSTR-CV-1 1 gph Non-Potable Purple ½" FIPT SLV-PSTR-2 SLV-PSTR-CV-2 2 gph Non-Potable Purple ½" FIPT SLV-PSTR-4 SLV-PSTR-CV-4 4 gph Non-Potable Purple ½" FIPT PS6 (BARBED) PRO-SPEC SPECIFICATIONS (MULTI OUTLET) Flow Rate Color Inlet SLV-PS6-05 ½ gph per outlet Brown Barbed SLV-PS6-1 1 gph per outlet Gray Barbed SLV-PS6-2 2 gph per outlet Dk. Green Barbed SLV-PS6-4 4 gph per outlet Red Barbed SLV-PS6T-05 ½ gph per outlet Brown ½" FIPT SLV-PS6T-1 1 gph per outlet Gray ½" FIPT SLV-PS6T-2 2 gph per outlet Dk. Green ½" FIPT SLV-PS6T-4 4 gph per outlet Red ½" FIPT PAGE 5

8 D2 DIRTY WATER EMITTERS D2 EMITTERS D2 SERIES PASSES 2X THE AMOUNT OF DIRT COMPARED WITH TRADITIONAL EMITTERS! ALL MODELS FEATURE Ideal for reclaimed and well water applications Fully pressure compensating design delivers uniform flow throughout a wide pressure range, (5-45 ;.33 bars - 3 bars) regardless of elevation changes and pressure inconsistencies Available in flow rates of 0.5, 1, & 2 gph Flow rates and flush options are color coded Rugged design. Each emitter is manufactured from UV-inhibited engineering grade plastics to ensure maximum life span Barbed emitters are compatible with PVC or polyethylene tubing. ½" FIPT models are compatible with all standard ½" MIPT fittings. SINGLE OUTLET ½" FIPT or barbed base configuration to handle every design situation* Available in self-cleaning or zero-flush configurations MULTI-OUTLET ½" FIPT or barbed base and 6 barbed outlets to handle every design situation Unused outlets must be capped using outlet caps (part #PC6-C) OPERATING RANGE PC Flow: gph [Single Outlet] gph x 6 [Multi-Outlet] Pressure: 5 45 Filtration: Mesh * Designer Note: On self-flushing models, it is required to designate 3.5 gph for each emitter, regardless of the flow rate, to compensate for the hydraulic needs of the flushing action on turn-on and turn-off. D2 SELF FLUSH PERFORMANCE Discharge (gph) Discharge (gph) Pressure (kpa) GPH Emitter 1.0 GPH Emitter 0.5 GPH Emitter GPH Emitter 1.0 GPH Emitter 0.5 GPH Emitter Pressure () D2 ZERO FLUSH PERFORMANCE Pressure (kpa) Pressure () 15,0 10,0 5,0 10,0 5,0 Discharge (lph) Discharge (lph) PCRT/PCRTZ 1 Single Outlet PCR/PCRZ 2 3 PCC/PCCZ SLV-PCRZ AT GRADE ON TUBING 1. BUG CAP 2. UVR PLASTIC TUBING STAKE 3. DISTRIBUTION TUBING 4. D2 SERIES ZERO FLUSH SINGLE-OUTLET BARBED EMITTER 5. PVC FLEX HOSE 6. PVC COATED GALVANIZED TUBING STAKE SINGLE OUTLET MODEL SPECIFICATIONS Type Self Cleaning Color Code Zero Flush Color Code Flow Rate Inlet Outlet SLV-PCRT-05 Tan SLV-PCRTZ-05 Brown ½ GPH ½" FIPT 1 /8" Barbed Threaded SLV-PCRT-1 Black SLV-PCRTZ-1 Gray 1 GPH ½" FIPT 1 /8" Barbed SLV-PCRT-2 Lt. Green SLV-PCRTZ-2 Dk. Green 2 GPH ½" FIPT 1 /8" Barbed SLV-PCR-05 Tan SLV-PCRZ-05 Brown ½ GPH ¼" Barbed 1 /8" Barbed Barbed SLV-PCR-1 Black SLV-PCRZ-1 Gray 1 GPH ¼" Barbed 1 /8" Barbed SLV-PCR-2 Lt. Green SLV-PCRZ-2 Dk. Green 2 GPH ¼" Barbed 1 /8" Barbed SLV-PCC-05 Tan SLV-PCCZ-05 Brown ½ GPH ¼" Barbed Diffused Micro SLV-PCC-1 Black SLV-PCCZ-1 Gray 1 GPH ¼" Barbed Diffused Bubblers SLV-PCC-2 Lt. Green SLV-PCCZ-2 Dk. Green 2 GPH ¼" Barbed Diffused MULTI-OUTLET MODEL SPECIFICATIONS Type Self Cleaning Color Code Flow Rate Inlet Outlet SLV-PC6T-05 Tan ½ GPH ½" FIPT ¼" Barbed Threaded SLV-PC6T-1 Black 1 GPH ½" FIPT ¼" Barbed SLV-PC6T-2 Lt. Green 2 GPH ½" FIPT ¼" Barbed SLV-PC6-05 Tan ½ GPH ¼" Barbed ¼" Barbed Barbed SLV-PC6-1 Black 1 GPH ¼" Barbed ¼" Barbed SLV-PC6-2 Lt. Green 2 GPH ¼" Barbed ¼" Barbed Multi-Outlet PC6 (BARBED) PC6T (THREADED) PAGE 6

9 IH-SERIES RISERS IH-Series Risers H-SERIES RISERS Pre-assembled with two ½ MIPT UVR male adapters Accepts any ½ FIPT emitter Cost less preassembled than purchased separately in parts Ideal for slope applications Pre-assembly reduces installation cost by up to 50% On grade or below grade installation Custom lengths available Also available pre-assembled with PST emitters OPERATING RANGE Max Flow: 7 gpm Max Pressure: 60 RISER ASSEMBLIES PRE-ASSEMBLED WITH SALCO PST EMITTERS Adapter Color SLV-PVC-y-ACLxx Black SLV-PVC-y-M-ACLxx Mulch SLV-PVC-y-D-ACLxx Desert SLV-PVC-y-G-ACLxx Grey Granite SLV-PVC-y-R-ACLxx Reclaimed y = Emitter flow rate ( 050 = ½ gph, 1 = 1 gph, 2 = 2 gph, and 4 = 4 gph xx = Length of riser ( 12 or 18 or 24 ) in inches NO EMITTER RISER ASSEMBLIES PRE-ASSEMBLED RISERS WITH 2 MALE ADAPTERS Adapter Color SLV-PVC-ACLxx Black SLV-PVC-M-ACLxx Mulch SLV-PVC-D-ACLxx Desert SLV-PVC-G-ACLxx Grey Granite SLV-PVC-R-ACLxx Reclaimed xx = Length of riser ( 12 or 18 or 24 ) in inches 1 IH SERIES RISER WITH PST 1. SALCO PST EMITTER 2. FLEXIBLE RISER 3. PVC LATERAL PIPE 4. PVC SCH 80 SST TEE/ELL PAGE 7

10 STAKES AND RISERS SLV-DTS SLV-DTS B RIGID RISER PLAIN RIGID RISER WITH ½" MNPT ADAPTER SLV-DTS SLV-DTS RIGID RISERS Rigid Risers are used throughout a micro irrigation system in conjunction with micro emitters and fittings. TUBING STAKES DTS & DTS B (compatible with 1/8" to ¼" tubing) are made from UVR Plastic and accept any manufacturer s distribution tubing DTS (compatible with 1/8" to ¼" tubing) & DTS (compatible with ½" to 1" tubing) are PVC-coated galvanized wire to ensure rust resistance Ideal for high profile applications Rigid Risers are available in 4 lengths Rigid Risers in plain, barbed, threaded and ½" MNPT configuration UV stabilized materials for long life APPLICATIONS Rigid Risers accept all Quick thread and UNF products (i.e. drippers, sprays and sprinklers). MODEL SPECIFICATION SLV Riser 6" Plain SLV Riser 8" Plain SLV Riser 12" Plain SLV Riser 18" Plain PAGE 8

11 FILTERS WYE FILTERS Manufactured from ABS 150 mesh stainless steel screen Non-migrating seals eliminate water blow-by OPERATING RANGE Flow: Max of 20 GPM Pressure: PSI Filtration: 150 Mesh (others available) SPINTECH FILTERS Spintech Filters force water through a directional flow tube that disperses it across the entire surface area of the stainless steel screen. The unique directional flow tube does not restrict flow or create pressure. The Spintech line of Y-Filters comes standard with a manual ball valve, but are available with an automatic self-cleaning flush valve. The self-cleaning version will flush the screen area at the pressurization and depressurization of each cycle. The only vortex cleaning filter that does not restrict flow Manufactured from engineering grade ABS Standard 150 mesh stainless steel screen Available in clear or black 150 pressure rating OPERATING RANGE Max Pressure: 80 PSI Max Flow: 20 GPM Filtration: 150 mesh (others available) MODEL SPECIFICATION BLACK BODY SLV-HYS-075 ¾" Standard model SLV-HYSF-075 ¾" With manual flush valve SLV-HYSG-075 ¾" With pressure gauge SLV-HYSFG-075 ¾" With flush valve and pressure gauge SLV-HYSFGM-075 ¾" With flush valve and pressure gauge SLV-HYS-100 1" Standard model SLV-HYSF-100 1" With manual flush valve SLV-HYSG-100 1" With pressure gauge SLV-HYSFG-100 1" With flush valve and pressure gauge SLV-HYSFGM-100 1" With flush valve and pressure gauge CLEAR BODY SLV-DYS-075 SLV-DYSF-075 SLV-DYSG-075 SLV-DYSFG-075 SLV-DYS-100 SLV-DYSF-100 SLV-DYSG-100 SLV-DYSFG-100 ¾" Standard model ¾" With manual flush valve ¾" With pressure gauge ¾" With flush valve and pressure gauge 1" Standard model 1" With manual flush valve 1" With pressure gauge 1" With flush valve and pressure gauge MODEL SPECIFICATION SPINTECH BLACK BODY SLV-SPB-075 ¾" Manual flush SLV-SPBG-075 ¾" Manual flush, stainless gauge SLV-SPBF-075 ¾" Auto-cleaning SLV-SPBFG-075 ¾" Auto-cleaning, stainless gauge SLV-SPB-100 1" Manual flush SLV-SPBG-100 1" Manual flush, stainless gauge SLV-SPBF-100 1" Auto-cleaning SLV-SPBFG-100 1" Auto-cleaning, stainless gauge SPINTECH CLEAR BODY SLV-SPC-075 ¾" Manual flush SLV-SPCG-075 ¾" Manual flush, stainless gauge SLV-SPCF-075 ¾" Auto-cleaning SLV-SPCFG-075 ¾" Auto-cleaning, stainless gauge SLV-SPC-100 1" Manual flush SLV-SPCG-100 1" Manual flush, stainless gauge SLV-SPCF-100 1" Auto-cleaning SLV-SPCFG-100 1" Auto-cleaning, stainless gauge PAGE 9

12 FILTERS PRESSURE REGULATING FILTERS Heavy duty glass-filled polypropylene body Integrated pressure regulator: compact size Comes with SS screen filter element Choice of 25 PSI or 45 PSI regulation Flush cap for easy cleaning Available in 3/4 and 1 models SPECIFICATIONS Operating Pressure: 20 to 120 PSI (8.4 BAR) 155 mesh/100 micron SS screen Preset pressure regulation at 25 PSI or 45 PSI MNPT Inlet and Outlet L: 6 x H: 4.25 x W: /4 PRF Flow Rate vs. Pressure Loss Flow (GPM) N/A N/A N/A 15 N/A N/A 1 PRF Flow Rate vs. Pressure Loss Flow (GPM) N/A N/A Max Outlet 11.5 GPM 12 GPM SLV-PRF SLV-PRF SLV-PRF SLV-PRF How to Specify Description 3/4 FILTER, SS SCREEN, 25 PSI REGULATOR 1 FILTER, SS SCREEN, 25 PSI REGULATOR 3/4 FILTER, SS SCREEN, 45 PSI REGULATOR 1 FILTER, SS SCREEN, 45 PSI REGULATOR PAGE 10

13 PRO-SPEC EMITTER TUBING FILTERS PLASTIC FILTERS WITH SCREEN OR DISC ELEMENTS UV-resistant polypropylene body Interchangeable screen and disc elements Large filter area and low friction Flush cap for easy cleaning Available in 3/4 and 1 models SPECIFICATIONS Operating Pressure: up to 120 PSI (8.4 BAR) 155 mesh/100 micron SS screen or Disc element Disc element spring: SS 304 Temperature range: up to 130 F (54 C) MNPT Inlet and Outlet Flow rates up to 18 GPM (4m 3 /h) Size Surface Area & Flow Rate Filtration Area (sq in.) Max Recommended Flow Rate (GPM) 3/4 Screen Screen /4 Disc Disc Dimensions & Weight Size L (in.) H (in.) W (in.) WT (lbs.) 3/4 Screen Screen /4 Disc Disc Disc and screen replacement elements SLV-HYIS-075 SLV-HYIS-100 SLV-HYID-075 SLV-HYID-100 SLV-DISC-100 How to Specify Description 3/4" FILTER, 155 MESH SS SCREEN, FLUSH CAP 1" FILTER, 155 MESH SS SCREEN, FLUSH CAP 3/4" FILTER, 150 MESH DISC, FLUSH CAP 1" FILTER, 150 MESH DISC, FLUSH CAP DISC ELEMENT, 150 MESH, 3/4" OR 1 FILTER PAGE 11

14 FILTERS 1.5 FILTER WITH SCREEN OR DISC ELEMENTS UV-resistant polypropylene body Interchangeable screen and disc elements Large filter area and low friction Flush cap for easy cleaning Inlet/Outlet access points for pressure testing SPECIFICATIONS Operating Pressure: up to 120 PSI (8.4 BAR) 155 mesh/100 micron SS screen or Disc element Disc element spring: SS 304 Temperature range: up to 130 F (54 C) MNPT Inlet and Outlet Flow rates up to 50 GPM (18.1m 3 /h) Size Filtration Area (sq in.) Max Recommended Flow Rate (GPM) 1.5 Screen Disc Dimensions & Weight Size L (in.) H (in.) W (in.) WT (lbs.) 1.5 Screen Disc SLV-HYIS-150 SLV-DISC-150 Surface Area & Flow Rate How to Specify Description 1.5" FILTER, 155 MESH SS SCREEN, FLUSH CAP DISC ELEMENT, 150 MESH, 1.5" FILTER 1½ Disc and screen replacement elements for 1½ PAGE 12

15 PRO-SPEC FITTINGS EMITTER PVC MALE ADAPTER Made of high impact PVC to endure the harshest conditions Solvent welds using standard methods Available in black, reclaimed purple and desert camo (except adapter) Perfect for use with Salco s PST, PCCT, and PCRT series emitters Compatible with any ½" female threaded component MODELS SLV B ½" MIPT x ½" Irrigation Size 3/8" IPS (Black) SLV R ½" MIPT x ½" Irrigation Size 3/8" IPS (Reclaimed Purple) SLV B ½" MIPT x ½" IPS (Black) SLV R ½" MIPT x ½" IPS (Reclaimed Purple) 6-OUTLET DRIP MANIFOLD Outlet flow can be varied with an emitter at the end of distribution tubing Available in ½" FIPT or barbed inlet Allows water to be directed to as many as six different locations Outlets can be opened/closed as necessary using part SLV-PC6-C Unrestricted flow through outlets indicated by blue color MODELS SLV-DMT-6 (Threaded) PVC IRRIGATION HOSE ADAPTER SLV-DM-6 (Barbed) Adapts a ½" IPS slip to ½" irrigation size Made of high impact PVC to endure the harshest conditions Solvent welds using standard methods For use with Salco PVC flex hose MODELS SLV-IHA-050 PVC Irrigation Hose Adapter, converts ½" IPS to 3/8" PAGE 13

16 TUBING DISTRIBUTION TUBING Description Quantity POLYETHYLENE MICRO TUBING SLV-PE " x 0.063" 3,500' coil SLV-PE " x 0.076" 3,500' coil SLV-PE " x 0.105" 2,000' coil SLV-PE " x 0.125" 100' coil SLV-PE " x 0.125" 1,000' coil SLV-PE " x 0.128" 3,000' coil SLV-PE " x 0.160" 100' coil SLV-PE " x 0.160" 1,000' coil SLV-PE " x 0.160" 2,500' coil SLV-PE " x 0.155" 2,500' coil SLV-PE " x 0.125" 2,000' coil SLV-PE " x 0.170" 100' coil SLV-PE " x 0.170" 1,000' coil SLV-PE " x 0.170" 2,000' coil SLV-PE " x 0.188" 1,500' coil SLV-PE " x 0.210" 1,500' coil SLV-PE " x 0.250" 1,000' coil SLV-PE " x 0.250" 500' coil SLV-PE " x 0.250" 1,000' coil SLV-PE " x 0.250" 750' coil SLV-PE " x 0.375" 1,000' coil SLV-PE CL " x 0.375" x 24" 24" cut VINYL MICRO TUBING SLV-PVC " x 0.125" 100' coil SLV-PVC " x 0.125" 2,000' coil SLV-PVC " x 0.160" 100' coil SLV-PVC " x 0.160" 1,000' coil SLV-PVC " x 0.160" 2,500' coil SLV-PVC " x 0.170" 100' coil SLV-PVC " x 0.170" 1,000' coil SLV-PVC " x 0.170" 2,000' coil SUPPLY TUBING Description Quantity SUPRA FLEX POLY SUPPLY TUBING SLV-PE " x.520" 100' coil SLV-PE " x.520" 500' coil SLV-PE " x.520" 1,000' coil SLV-PE " x.600" 100' coil SLV-PE " x.600" 500' coil SLV-PE " x.600" 1,000' coil SLV-PE CL24.700" x.600" 24" cut length SLV-PE " x.620" 100' coil SLV-PE " x.620" 500' coil SLV-PE " x.620" 1,000' coil SLV-PE " x.820" 100' coil SLV-PE " x.820" 500' coil SLV-PE " x.820" 1,000' coil SLV-PE " x 1.050" 250' coil SLV-PE " x 1.060" 250' coil A/R FLEX PVC TUBING FOR USE WITH RECYCLED/RECLAIMED WATER SLV-PVC-AR ½" Irrigation Size Hose ( 3 /8" IPS) 500' Coil SLV-PVC-AR-IPS ½" IPS 200' Coil SLV-PVC-AR-IPS ¾" IPS 200' Coil SLV-PVC-AR-IPS " IPS 100' Coil More Sizes Available Upon Request FLEXIBLE IPS HOSE Description Quantity FLEXIBLE IPS HOSE SLV-PVC-IPS ½" IPS 100' coil SLV-PVC-IPS ½" IPS 200' coil SLV-PVC-IPS ¾" IPS 100' coil SLV-PVC-IPS ¾" IPS 200' coil SLV-PVC-IPS " IPS 100' coil Description Quantity NON-ALGAECIDE FLEXIBLE IPS HOSE SLV-PVC-NA-IPS-050-CL24 ½" IPS 24" cut length SLV-PVC-NA-IPS-050-CL30 ½" IPS 30" cut length SLV-PVC-NA-IPS-050-CL36 ½" IPS 36" cut length SLV-PVC-NA-IPS-050-CL48 ½" IPS 48" cut length SLV-PVC-NA-IPS-050-CL60 ½" IPS 60" cut length SLV-PVC-NA-IPS-075-CL24 ¾" IPS 24" cut length SLV-PVC-NA-IPS-075-CL30 ¾" IPS 30" cut length SLV-PVC-NA-IPS-075-CL36 ¾" IPS 24" cut length SLV-PVC-NA-IPS-075-CL42 ¾" IPS 42" cut length SLV-PVC-NA-IPS-075-CL48 ¾" IPS 48" cut length SLV-PVC-NA-IPS-075-CL60 ¾" IPS 60" cut length SLV-PVC-NA-IPS-100-CL36 1" IPS 36" cut length SLV-PVC-NA-IPS-100-CL60 1" IPS 60" cut length PAGE 14

17 BUG CAPS Prevents insect intrusion An added defense against foreign particles Available for tubing with ODs of 0.187", 0.220"-0.270" and 0.300" MODELS SLV-EOCV-125 Bug cap for 0.187" OD tubing & 1 / 8" barbs SLV-EOCV-220 Bug cap for 0.220" OD tubing & ¼" barbs SLV-EOCV-300 Bug cap for 0.300" OD tubing EMITTER OUTLET CAPS Plugs unused 1 / 8" barbed emitter outlets For use with PC6, PC6T, PC6Z, PC6TZ, DM6 and DM6T MODELS SLV-PC6-C Emitter Outlet Cap AUTOMATIC FLUSH VALVE Automatic and manual flushing Easy to use ¾" hose thread with drip-tight washer Highly visible color coded flow indicator Unique two-piece button allows manual flushing in hot temperatures MODELS SLV-AFV-075L SLV-AFV-075H GOOF PLUGS Plugs misplaced or unneeded punctures in supply tubing Two sided, plugs 0.187" (1/8") and 0.250" (¼") size holes MODELS SLV SLV-GFP 1 Automatic flush valve, low flow Automatic flush valve, high flow 2 3 Rack of 10 Goof Plugs Goof Plug AUTOMATIC FLUSH VALVE 1. FINISH GRADE 2. 6 ROUND VALVE BOX 3. AUTOMATIC FLUSH VALVE 4. SUPPLY TUBING WITH 3/4 HOSE THREAD ADAPTER 5. BRICK SUPPORTS 6. 3/4 PEA GRAVEL SUMP BLUETOOTH HOSE END TIMER and ACCESSORIES EMITTER ACCESS SLEEVE Provides convenient access to subsurface emitters while protecting against vandalism Slotted body facilitates installation of distribution tubing Rugged, UV-resistant thermoplastic construction 12" tall, 4.75" wide MODELS SLV-DAS-8 SLV-DAS-8R PUNCH TOOLS Emitter access sleeve (black) Emitter access sleeve (reclaimed purple) The toughest, most rugged punch tool on the market Made from stainless steel to ensure durability and longevity Will punch any hose from 3 / 8" to 1" Replacable and adjustable punch tip BLUETOOTH HOSE END TIMER Bluetooth range: 15 ft (5 m) inside and up to 30 ft (10m) outside (unobstructed) Available in 3/4 GHT OPERATING RANGE Pressure: from 14 to 88 (1 to 6 bars) Flow: up to 10 gal/min. (38 l/min.) Temperature: Up to 122 F (50 C). Remove and store indoors in freezing weather. POWER 9V Alkaline Battery Battery life expectancy: 1 year (with 8 start times per day) SLV-HP-125 SLV-HPT-05 (REPLACEMENT TIP) SMARTPHONE AND TABLET COMPATABILITY ios: iphone 6, 6+, 5S, 5C, 5, 4S, ipad Air, Mini, 4, 3, ipod Touch 5 ANDROID: Samsung Galaxy S5, S4, S3, Grand 2, Galaxy Note 10.2, 10.1, 3, 2, Galaxy Tab , 4 7, Google Nexus 7, 5, 4, Motorola Moto X, G, E MODELS SLV-HET-CART Hose end timer, Bluetooth, Cardboard Carton SLV-HET-BP Hose end timer, Bluetooth, Blister Pack PAGE 15

18 SPRINKLER ACCESSORIES SWING PIPE Inside diameter: (30,0 m) stackable coils, marked in 12 increments SPC-100 HIGH-PRESSURE SWING PIPE Engineered for high pressures, up to 150 Quick and easy installation SPCX-100 SUPER FLEX SWING PIPE Contractor-preferred maximum flexibility without kinking Textured surface is easy to grip even when wet Engineered for pressures up to 80 SPC-100 FITTINGS Easy twist-in insertion without use of glue or clamps Multiple barbs prevents barb blow-out Hard acetal thermoplastic for sharper barbs MODELS SASB-COUP SASBA-050 SASBA-075 SASB-ELBOW-050 SASB-ELBOW-075 SASB-TEE ½ Barb x ½ Barb Coupling ½ (15/21) M NPT x ½ Barb Adapter ¾ (20/27) M NPT x ½ Barb Adapter ½ (15/21) M NPT x ½ Barb Elbow ¾ (20/27) M NPT x ½ Barb Elbow ½ Barb x ½ Barb Tee MODELS SPC-10 SPCX-100 High-Pressure Swing Pipe Super Flex Swing Pipe SWING ASSEMBLIES SASBA-050 SASBA-075 Marlex ells can be adjusted to virtually any configuration, leak free 3L configuration has a Marlex ell on one end ideal for use with horizontally mounted tees 4L configuration has Marlex ells on both ends for maximum versatility with vertically mounted tees High pressure tested to over 100 PSI SASB-TEE SASB-COUP MODELS Length Inlet/Outlet SPSA L 6" ½" x ½" SPSA L 6" ½" x ¾" SPSA L 12" ½" x ½" SPSA L 12" ½" x ¾" SPSA L 12" ¾" x ¾" SPSA L 6" ½" x ½" SPSA L 6" ½" x ¾" SPSA L 12" ½" x ½" SPSA L 12" ½" x ¾" SPSA L 12" ¾" x ¾" SASB-ELBOW-050 SPSA L SASB-ELBOW-075 *Spray not included SPSA L PAGE 16

19 PVC SCHEDULE 40 IPS PLASTIC PIPE C = 150 Loss per 100' of pipe (/100') REFERENCE PRO-SPEC EMITTER Size ½" ¾" 1" 1 ¼" 1 ½" 2" 2 ½" 3" 4" 6" O.D I.D Wall Dim Flow gpm Shading indicates velocities over 5 (not recommended). PAGE 17

20 REFERENCE PVC CLASS 200 IPS PLASTIC PIPE SDR21 C = 150 Loss per 100' of pipe (/100') Size ½" (1) ¾" 1" 1 ¼" 1 ½" 2" 2 ½" 3" 4" 6" O.D I.D Wall Dim Flow gpm (1) SDR 13.5 pipe for ½". SDR21 not standard. Shading indicates velocities over 5 (not recommended). PAGE 18

21 POLYETHYLENE (PE) SDR PRESSURE RATED TUBE C = 140 Loss per 100' of pipe (/100') REFERENCE PRO-SPEC EMITTER Size ½" ¾" 1" 1 ¼" 1 ½" 2" 2 ½" 3" 4" I.D Flow gpm Shading indicates velocities over 5 (not recommended). PAGE 19

22 REFERENCE TYPE K COPPER WATER TUBE C = 140 Loss per 100' of pipe (/100') Size ½" 5 / 8" ¾" 1" 1 ¼" 1 ½" 2" 2 ½" 3" I.D Flow gpm Shading indicates velocities over 5 (not recommended). PAGE 20

23 WARRANTY PRO-SPEC EMITTER LIMITED WARRANTY Salco Products manufactures its products with the highest standards of workmanship, using the best materials available through state of the art processes. Salco Products warrants its products as follows: Limited Warranty: Salco Products warrants its products to be free from defects in material and/or workmanship for a period of three (3) years from the original date of purchase. Exceptions that could result in denial of a warranty claim: 1. Damage caused by careless handling, improper repackaging or shipping. 2. Damage due to misapplication, misuse, abuse or failure to operate product as specified in the owner s manual. 3. Damage caused by failure to install products as specified in the owner s manual. 4. Damage due to unauthorized product modifications or failure to use Salco Products original replacement parts. 5. Damage caused by negligence or failure to properly maintain products as specified in the owner s manual. 6. Damage caused by water freezing inside the product. 7. Damage caused by accidents, fire, acts of God or other circumstances outside the control of Salco Products. Proof of purchase and/or date of installation will be required to execute a warranty claim. Owner agrees to prepay all shipping charges to Salco Products. Warranty Obligations of Salco Products: Should a defect in material and/or workmanship in any item covered by this warranty become evident during the term of the warranty, then, upon the owner following the procedures set forth below, Salco Products will, at its option, repair or replace such item or part at its own cost and expense. Salco Products is not, however, responsible under this warranty for any cost of shipping or transportation of the equipment or parts thereof to or from the Customer Care Department. Salco Products is not liable for any of time, inconvenience, incidental expenses such as telephone calls, labor or material charges incurred in connection with the removal or replacement of the equipment or any other incidental or consequential damages. PLEASE NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. No Other Warranties: To the maximum extent permitted b applicable law, Salco Products disclaims all other warranties, either expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, with regard to the Product(s), Part(s) and/or any accompanying written materials. Procedure for Obtaining Performance: In order to obtain the benefits of this warranty, the owner must contact the Salco Products Customer Care Department as soon as possible after discovery of the defect but, in no event, later than the expiration of the warranty provided in this warranty. Upon receipt of this communication, Salco Products will promptly notify the owner of the address to which the defective item may be shipped. The owner shall then ship the item, freight prepaid, to the address indicated, together with a RETURN GOODS AUTHORIZATION code obtained from the Customer Care Department and a brief description of the problem(s) encountered with the item. Unauthorized returns will not be accepted. Warranties or Representations by Others: No other person has any authority to make any warranties or representations concerning Salco Products or its products. Accordingly, Salco Products is not responsible for any such warranties or representations. Other Rights: This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Sole Warranty: Supersedes all previous publications. Salco Products 1930 South Rochester Ave. Unit 111 Ontario, CA Toll Free: SALCO4U ( ) Phone: Fax: PAGE 21

24 Salco Products 1930 South Rochester Ave. Unit 111 Ontario, CA Toll Free: SALCO4U ( ) Phone: Fax: