TOOL CONTROL MODULAR INDUSTRIAL STORAGE UNPRECEDENTED STORAGE OPTIONS TO ACCOMMODATE ANY STORAGE NEED N009. Color Options

Transcription

1 MODULAR INDUSTRIAL STORAGE UNPRECEDENTED STORAGE OPTIONS TO ACCOMMODATE ANY STORAGE NEED The Williams Modular Industrial Storage Program is designed, engineered and built specifically for industrial settings, processes, and systems. Heavy-duty steel construction, innovative safety and security features, and workplace-specific configurations provide for customizable, scalable storage that meets even the most complex needs. Color Options Gloss Royal Red Black Blue RD BK DB TOOL CONTROL N00

2 TOOL CONTROL MODULAR INDUSTRIAL STORAGE Cabinet Heights from 0" to " Cabinet Widths from 2" to 8" Standard full length forklift base Multiple Drawer Height/Depth Options Available Security Options Lock In/Lock Out Latch Locks individual drawers into position, either closed or fully extended. Recommended for truck and van storage applications. Hinged Lock Bar Features padlock hasp for additional protection and security of drawers and contents. Work Surfaces Available in a variety of shapes and materials. N00 snapon.com/industrial

3 Essential Drawer Features 7 Unique Drawer s/depths Drawer heights in 20mm increments Drawer Model Point Value Drawer Front Height Drawer Inside Usable Height Drawer Side Wall Height MODULAR INDUSTRIAL STORAGE ENGINEERED FOR INDUSTRIAL USE Features Superior Design & Construction Inside and Out Fully MIG Welded and surface ground on all eight corners, creating a cabinet the looks as good as it performs. SAFE, STRONG & EFFICIENT DRAWER DESIGN Heavy duty ga plug-in guide rail allows for quick adjustment to accept different drawer sizes and combinations. Heavy duty ga carriage with six ball bearing rollers and four steel rollers ensures smooth operation of every drawer, even when loaded to the 400 lb. capacity. Full height sidewalls provide maximum cubic storage capacity, while reducing item spillover into adjacent compartments. Full Width 4 degree angle aluminum handles for easy identification of contents. Standard full length forklift base provides a safe platform for installing cabinets or for moving them when reconfiguring workspace. The removable kick panel combines enhanced safety with a clean look. (ga fully welded optional pallet truck base available) " -7/8" 4-/4" -/2" 6-/8" 7" 7-/4" 8-/2" -/4" 0-/8" " -/4" 2-/2" -/4" 4-/4" 4-7/8" -/2" 2-/8" " -7/8" 4-/4" -/2" 6-/8" 7" 7-/4" 8-/2" -/4" 0-/8" " -/4" 2-/8" -/4" 4" 4-/4" 2" " -7/8" -7/8" -7/8" 6" 6" 6" 8-/2" 8-/2" 8-/2" 0-7/8" 0-7/8" 0-7/8" 0-7/8" 0-7/8" 0-7/8" Taller drawers are available. Call your Snap-on Industrial Account Manager for assistance. Drawer Capacity: 400-lbs 00% extension Riveted Drawer Fronts & Handles Stainless steel rivets provide 60 lbs. of shear strength per rivet for outstanding durability. A minimum of 4 rivets are used to fasten the drawer front to the body and the drawer pull to the drawer front, creating a stronger bond than screws can. Full-Width Aluminum Handles with Safety Overlap and 4 Angle Overlap helps prevent injury by eliminating sharp edges and pinch points. The angled design allows improved handle label visibility. 00% View Drawer Extension Full visibility and access to drawer contents via double roller tracks. Six high-quality steel ball bearings and four roller bearings support 400 pounds per drawer. TOOL CONTROL Safe Overlapping Handle Supports Up To 400 LBS. Per Drawer N0

4 TOOL CONTROL MODULAR INDUSTRIAL STORAGE CABINET HEIGHTS & WIDTH OPTIONS Choose from Six Cabinet Heights The Williams Modular Industrial Storage Program features a large selection of cabinet housings to meet any demand. Choose from six heights to accommodate your company s personnel and space. 0"Desk Height -/2" Bench Height Model 600 Model 700 7" Bench Height Model /4" Counter Height Seated Model 00 Choose From Five Cabinet Widths Cabinets are available in five different widths. Choose widths to accommodate your specific storage needs. All cabinets are 27-/4" deep and are available in all cabinet heights. 4-/4" Counter Height Standing Model 000 " Eye Level Model 60 Narrow-Wide (NW) 2" WIDE CABINETS Makes excellent work station pedestals or mobile cabinets where space is limited Accommodates 8" items Standard-Wide (SW) 2-/4" WIDE CABINETS Recommended for most applications and provides the fastest pick-rates Accommodates items up to 24-/2" Standard-Wide Plus (SWP) 2-/2" WIDE CABINETS Recommended for most applications and provides the fastest pick-rates Accommodates 28" items Human-Engineered Drawers Square Design The square Standard Wide (SW) drawer was ergonomically designed to accommodate the reach of the average person from either the front or the side, increasing picking productivity. Picking stock or retrieving parts from the side keeps aisles clear for increased efficiency and productivity. Extra-Wide Plus (EWP) 46" WIDE CABINETS Recommended where parts or tools exceed " Accommodates 42" items N02 Double-Wide (DW) 8-/4" WIDE CABINETS Recommended for extra-long items Accommodates items up to -/2"wide snapon.com/industrial More Storage Space The innovative Standard Wide Plus (SWP) cabinet is an exclusive, providing up to 22% more storage than our SW (standard wide) cabinets or competitors products.

5 Modular Storage Color Options Counter Height (Seated) - 4" Tall SW600FDB MODULAR INDUSTRIAL STORAGE DRAWER CONFIGURATIONS TO MEET EVERY NEED Gloss Royal Red Black Blue RD BK DB Choose from five cabinet heights Custom configurations are also available. Contact your Snap-on Rep for details. Desk Height - 0" Tall SW600F2DB Bench Height - " Tall SW700F4DB SW700FDB TOOL CONTROL SW00FDB SW00F6DB SW00F74DB SW00FDB SW00F0DB Counter Height (Standing) - 4" Tall SW000FDB SW000F6DB SW000F8DB SW000F0DB SW000FDB Eye Level Height - " Tall SW60F6DB SW60F72DB SW60FDB SW60F0DB SW60FDB SW60F4DB N0

6 TOOL CONTROL MODULAR INDUSTRIAL STORAGE DRAWER ACCESSORIES MAXIMIZE STORAGE SPACE DRAWER LINERS Anti-slip drawer liners provide cushioning and abrasion protection for the drawer. Maximum Storage in Minimum Space! Grooved Plastic Trays and Small Parts Containers Drawers are easily configured to perfectly match a wide variety of storage needs, from small parts such as fasteners and connectors, to delicate measuring equipment, cutting tools and electronic parts. Small parts containers and grooved plastic trays create custom layouts and drawer interiors to meet your specific needs. GROOVED PLASTIC TRAYS Available in sizes and designed to protect side-sensitive tooling /8" -7/8" 4 -/8" A80A 2-/2" x 2-/2" A80B 2-/2" x " N80 6" x 6" N80 Subdivided into 4 " x " compartments -/8" -7/8" N04 PLASTIC BINS - A SERIES Modular design made of tough plastic with a usable height of 2". Choose from two sizes. snapon.com/industrial PLASTIC BINS - N SERIES Modular design made of tough plastic with a usable height of 2". LABEL HOLDERS Transparent label holders clip onto plastic bins, grooved trays, and steel dividers.

7 MODULAR INDUSTRIAL STORAGE CUSTOM DRAWER LAYOUTS FOR BETTER ORGANIZATION Slotted Partitions Powder-coated steel partitions subdivide drawers from front-to-back. Model Number 80-P 00-P 20-P 80-P 240-P 00-P Height 2" " -7/8" 6" 8-/2" 0-7/8" Use with drawer no , 40, 60 Steel Dividers Powder-coated steel dividers further separate drawers when used with slotted partitions. Dividers slide into slots of partitions or drawer sidewalls to form compartments. Usable width of compartment Number of units (spaces) 80, and up -7/8" 2-/8" -/2" 4-/4" -/8" -7/8" 7-/8" -/8" 2-/4" U 4U U 6U 7U 8U 0U 2U 6U Standard Drawer Layouts Most popular drawer layouts shown. Custom drawer layouts available. Layout No. (6 Compartments) slotted partitions - 2 divider plates 8U Layout No. (20 Compartments) slotted partitions - 6 divider plates 8U Layout No. (2 Compartments) 2 slotted partitions - 6 divider plates 0U divider plates 2U Layout No. (6 Compartments) slotted partitions - 20 divider plates U 0 divider plates 6U LAYOUT NO. LAYOUT NO. LAYOUT NO. LAYOUT NO. OPTIONS FOR EVEN GREATER SECURITY AND SAFETY TOOL CONTROL Hinged Lock Bar Features a padlock hasp for additional protection and security of drawers and contents. Lock In/Lock Out Latch Locks individual drawers into position, either closed or fully extended. Recommended for truck and van storage applications. N0

8 TOOL CONTROL MODULAR INDUSTRIAL STORAGE MORE WAYS TO CUSTOMIZE, ORGANIZE, OPTIMIZE Shown with optional drawers and Clear Vue doors Modular Storage Color Options Gloss Royal Red Black Blue RD BK DB Shelving Units Organize bulky items by adding shelving storage to your cabinets. Their rugged, all-welded construction assures smooth operation, durability and years of dependable heavy-duty service. And because they re adjustable, you can rearrange the shelves to flexibly adapt to your storage needs for years to come. 8-gauge shelf notched to fit snugly around upright posts, preventing small items from falling through any gaps to the shelf below. Powder-coat epoxy paint baked on to provide a high gloss finish. Shelf reinforcement adds an additional 400 lbs. of load capacity. Patented -gauge shelf support frames the system and supports heavy loads. Clear Vue doors (optional) made from plexiglass keep your equipment in sight and secure. Choose From Various s Shelving units are available in different widths, depths and heights to meet your specific storage needs. Widths: Narrow-Wide (NW) 2-/4" Standard-Wide (SW) 2-/4" Standard-Wide Plus (SWP) 2-/2" Depths: Shallow-Depth (SD) 2-/2" Standard-Depth (S) 27-/4" Heights: 78" and 84" Choose Options and Accessories Select between shelves and drawers, or a combination of the two, for the interior. You can also further customize the shelving unit with solid doors, Clear Vue doors, a fork lift base and extra shelves. Available in standard colors of Dark Blue (DB), Red (RD), and Black (BK). Workstations Every workplace needs a place to work. We deliver highly customizable workstations to fit your specific needs. They can be stationary or mobile, can have shelves, cabinets, or risers, and can be topped with a variety of work surfaces. You can even add footrests. With this much customization, you ll be able to get the job done your way. Tops Solid maple work surfaces are available in a variety of shapes and sizes. Stainless tops also available upon request. N06 SLC0227 Available in a range of lengths Available in 48", 60", 72", 84", 0", 20" and 44" Fully welded and crafted out of heavy gauge steel Supports up to 2,000 lbs Riser shelves are available in steel (painted or stainless) or maple. Mobility workstations let you bring the work environment to the job, instead of going back and forth to and from the workstation Build It Your Way Workstations are available in five heights and can be configured with various options such as an open leg or panel leg, casters, steel or maple work surfaces, risers, drawers, and more. Available in standard colors of Dark Blue (DB), Red (RD), and Black (BK). snapon.com/industrial Part # NWMAPLETOP SWMAPLETOP SWPMAPLETOP EWPMAPLETOP DWMAPLETOP MAPLETOP048 MAPLETOP060 MAPLETOP072 MAPLETOP00 Handles & Wheels Make your storage mobile with our selection of handles and wheels. Description NW Maple Top 0D X 24L SW Maple Top 0D X 0L SWP Maple Top 0D X L EWP Maple Top 0D X 48L DW Maple Top 0D X 60L Maple Top 0D X 48L Maple Top 0D X 60L Maple Top 0D X 72L Maple Top 0D X 0L Part # Description SLC0227 Caster Kit Set 4 and Handle Kit SLC0226 Caster Kit Set 4

9 Job Site Boxes Designed for the toughest outdoor work environments Casters weight capacity is 00 lbs Tough industrial powder coating finish Heavy 6 gauge steel construction Recessed and concealed locking area protects padlock for ultimate security against drills and bolt cutter Fully welded seams provide maximum strength Recessed side handles for easy transportation Reinforced overlapping lid provides protection from weather and forced entry Heavy duty industrial lid stays prevents accidental closure Tread plate design for rugged durability 04 available in black only, all others are blue JHW00 JHW0 JHW02 JHW0 JHW04 Description 2w Wide x w'hhs[»w High 42w Wide x 20w'HHS[»w High 48w Wide x 24w'HHS[»w High 48w Wide x 0w'HHS[»w High 6w x 2w Swivel Caster Set JHW00 TOOL STORAGE Job Site Boxes TOOL CONTROL Job Site Boxes Designed for the toughest outdoor work environments Tough industrial powder coating finish Super heavy gauge steel construction Recessed locking area protects contents Fully welded seams provide maximum strength Reinforced overlapping lid provides protection from weather and forced entry Heavy duty industrial lid stays prevents accidental closure 4 way entry skid for easy handling JHW04 Description 48w Wide x 24w'HHS[»w High JHW04 N07

10 Used with Cylinder Single Acting Motor (hp) Pump Type Single-speed Two-speed Usable Oil Capacity (gal) Usable Oil Capacity (in ) 6. JHWHSS60 Pressure Rating (psi) Oil Displacement per Stroke (in ) st Stage 2nd Stage st Stage 2nd Stage 0,000 Max. Operating Force (lbs) Piston Stroke Oil Outlet Port "-8NPTF 67.0 JHWHS "-8NPTF 2.4 JHWHS2S 6.0 JHWHS2S JHWHS2S200 with Remote Control Pendant Switch 200 Max. Output Pressure (psi) Oil Output Flow Rate (in ) st Stage 2nd Stage 0..0 JHWE0HG JHWE0HGR 0, JHWE0H2G JHWE0H2GR 0, JHWEHG JHWEHGR 0, Air Pumps JHWAS0 JHWHS2S "-8NPTF "-8NPTF Valve Type 4-way, -pos. 4-way, -pos. 4-way, -pos. Valve Function Advance Hold Return Advance Hold Return Advance Hold Return High strength reinforced aluminum alloy reservoir is lightweight and corrosion resistant Pressure relief valve for overload protection Suggested air pressure range: 0-7 psi / 6-2 bar Designed to be used with single acting cylinders JHWAS200 offers a turbo function that features high flow at high pressure condition JHWAD0M offers a 4-way control valve for operation of double acting cylinders Maximum working pressure: 0,000 psi / 700 bar INDUSTRIAL POWER TOOLS HYDRAULIC PUMPS JHWE0H2G JHWAS80L Hand Pumps JHWHS2S, JHWHS2S00 and JHWHS2S200 feature 2 speed operation Pressure relief valve for overload protection Load release valve for single acting cylinder usage Electric Pumps Quiet operation meets OSHA regulations (80dBA) 2 speed operation allows for faster cylinder advance Full load starting capacities Internal filter keeps contamination from damaging pump Ideal for on site construction as well as maintenance Current Draw (amps) Motor Voltage (volts) Sound Level (dba) N64 Used with Cylinder Usable Oil Capacity (in ) Pressure Rating (psi) Oil Output Flow Rate (in /min) No Load Load Input Air Pressure Range (psi) 6.6 JHWAS60 0, JHWAS0 0, Single Acting JHWAS200 JHWAS80 0,000 0, JHWAS0L 0, JHWAS80L 0, Double Acting. JHWAD0M 0, snapon.com/industrial

11 Air Pump and Single-Acting Cylinder Matching Chart Capacity (Tons) Stroke < Note: Selection based on oil capacity requirements of cylinders JHWAS60 JHWAS0 JHWAS80 Hand Pump/E-Pump and Single-Acting Cylinder Matching Chart Capacity (Tons) Stroke sdf< PUMP AND CYLINDER COMBOS Not Recommended INDUSTRIAL POWER TOOLS JHWHS2S JHWHS2S00 JHWHS2S200 JHWE0H2G Note: Selection based on oil capacity requirements of cylinders. N6

12 JHW6C0T0 JHW6CT06 Single Acting Cylinders models Internal plunger threads Snap in grooved saddles Rod wiper seals out dirt and contamination Collar fixture threads Two base mounting holes on most models High strength steel construction from gun drilled solid bar High flow 8" NPTF couplers Collar thread protector One piece high grade alloy bearing for side load protection and long life Polyurethane cup seal provides optimum performance Industrial hard chrome plated ram helps prevent rust and corrosion Solid steel cylinder body Heavy duty return spring provides quicker retraction Ideal for lifting and pressing Maximum working pressure: 0,000 psi / 700 bar Cylinder Capacity (tons) INDUSTRIAL POWER TOOLS HYDRAULIC CYLINDERS 0 Stroke Cylinder #!2'4# Area (in2) Pressure at Capacity (psi) Oil Capacity (in) Collapsed Height 0.6 JHW6C0T00.0, JHW6C0T JHW6C0T JHW6C0T0.00 0, JHW6C0T JHW6C0T JHW6C0T JHW6C0T JHW6C0T JHW6C0T , JHW6C0T JHW6C0T JHW6C0T JHW6C0T JHW6CT JHW6CT JHW6CT JHW6CT , JHW6CT JHW6CT JHW6CT JHW6CT JHW6C2T JHW6C2T JHW6C2T JHW6C2T ,70 7. JHW6C2T JHW6C2T JHW6C2T JHW6C2T JHW6C0T08 6.4, JHW6CT JHW6CT , JHW6CT JHW6CT JHW6C7T ,20. JHW6C7T JHW6C00T , JHW6C00T N66 snapon.com/industrial

13 MINI JACKS Mini Jacks Low profile mini jack Pocket size and lightweight Convenient for storage Interchangeable saddle on model M0T7 and M0T0. Capacity (tons) M0T0 Minimum Height Maximum Height M0T7 Hydraulic Lifting M0T60 Base (L x W) M0T x M0T x M0T x M20T x Weight (lbs) INDUSTRIAL POWER TOOLS N67

14 Maintenance Kit Contents: JHW4M04T JHW4M0T Hand Pump X X Ram X X Hose Assembly X X Hose Coupler X X Ram Coupler X X Case X X Hydraulic Spreader X X Combination Head X X Rubber Head X X Ram Toe X X Plunger Toe X X Flat Base X X Serrated Saddle X X Wedge Head X X Male Connector X X Extension Tubes Included: Side Pump Bottle Jacks Hydraulic system is protected from internal damage by a patented by-pass mechanism Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance Fabricated from hard-cast steel with heat-treated critical stress areas Serrated heat-treated saddle provides generous lifting area and secure grip Heat-treated extension screw allows low pick-up height adjustment and maximum lift height U.S. patented built-in by-pass device protects hydraulic system from overpumping damage Unique cross-type forged release valve assures positive control A wide, rugged base provides stability and strength Critical stress points are reinforced in all models for added durability and dependability Economically priced for maximum value Capacity (tons) Min Height JHW4M0T INDUSTRIAL POWER TOOLS MAINTENANCE KITS AND JACKS Max. Height Maintenance Kits Sets are portable for easy use in the plant or on the job site Custom fitted, rugged blow molded storage case 0 ton set case has wheels for easy movement Designed for applications of pushing, spreading, pressing and more Pumps are rated from 8,000 to 0,000 psi Ram Specifications Collapsed Extended Height Height 4 JHW4M04T Capacity (tons) Extension Screw Hydraulic Lifting " 4" 6 " 0" 8 " 8" 6 " 27" " Base (LxW)Inches 2 JHWT2TV x. 2 JHWS2TV x. 20 JHWT20TV x JHWS20TV x.88 Number of Attachments 0 JHW4M0T.6.7 NOTE: capacity may be reduced when extension tubes and attachments are used JHWS2TV N68 snapon.com/industrial

15 JHW4T0T Toe Jacks Heat treated and chrome plated medium-carbon steel cylinder Chrome plated ram promotes longer seal life and optimum performance U.S. Patented by-pass device protects hydraulic system from over traveling damage JHW4T06T Toe Saddle Head Saddle Hydraulic Lift Capacity (tons) Min Height Max. Height Min Height Max height 6 JHW4T06T JHW4T0T Flat Body Cylinder Kits Kits include a variety of height magnetic adapters Perfect for low clearance areas needing a cylinder height boost Maximum working pressure: 0,000 psi / 700 bar Kits include magnetic adapters and carrying case Cylinders may be ordered separately Cylinder Capactiy (tons) HYDRAULIC SPECIALTY TOOLS JHW6CF0T0TB Stroke Complete Kit Cylinder Model Oil Capacity (in ) Collapsed Height 0.24 JH6CF0T0TB JHW6CF0T JH6CF0T0TB JHW6CF0T JH6CF20T0TB JHW6CF20T JH6CF0T0TB JHW6CF0T JH6CF0T0TB JHW6CF0T INDUSTRIAL POWER TOOLS Flat Body Cylinder Mounting Hole Dimensions Made of high quality steel Extremely low collapsed height for applications with minimal clearance at the lift point Great for areas of low clearance Maximum working pressure 0,000 psi / 700 bar Hole Pitch Counter Bore Dia. Counter Bore Depth Min Height JHW6CF0T JHW6CF0T JHW6CF20T JHW6CF0T JHW6CF0T JHW6CF0T0 N6

16 JHW6S.T0 JHW6S0T0 INDUSTRIAL POWER TOOLS HYDRAULIC SPREADERS AND PRESSES JHWE00T0 Spreaders Designed to operate in confined space where expansion is needed Compact size makes for easy use in hard to reach places Positive over travel stops and return spring Connects directly to pump hose with high flow coupler Maximum working pressure: 0,000 psi/ 700 bar Cylinder Capacity (tons) Cylinder #!2'4#0# (in²) Oil Capacity (in³) 0. JHW6S.T JHW6S0T /00 Ton Shop Presses Heavy steel welded construction Multi-position bed for work height adjustment Ideal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other press jobs Excellent for bending, bonding or straightening applications Capacity (tons) Pump Type Pump Model A==B> Air ==B JHWET06 Electric JHWE0HGR JHWHT06 Manual JHWHS2S200 A==; Air JHWET Electric JHWE0HGR 00 JHWE00T0 Electric JHWE0H2GR N70 snapon.com/industrial

17 Gauges Gauge Type Wet Face Dia. Thread Pressure Range Major Graduation Minor Graduation Graduation Major Graduation (psi) (bar) (psi) (bar) JHW8G02W 2.0, "-8NPTF 0-0, JHW8G04W , Gauge Adaptors Minor Graduation 00 0 A B C D E F JHW8FG8MF.2.8 "-8NPTF "-8NPTF "-8NPTF.2 Adapters Hydraulic Hoses Hose I.D. Hose End Fittings Operating Pressure (psi) Hose Length (ft) Weight (lbs) JHW8H22D06 Description Male Thread Female Thread Dimensions "-8NPTF C D A B JHW8FR8M2F Adapter "-8NPTF "-8NPTF. 0. JHW8FB2F8M Bushing "-8NPTF "-8NPTF JHW8H82D " JHW8H82D0 "-8NPTF 0.0 JHW8H82D ,000 JHW8H28D06 "-8NPTF 6.2 JHW8H88D06 6. " JHW8H88D0 "-8NPTF 0 6. JHW8H88D Hydraulic Oil Couplers Volume (gal) Coupler Type Viscosity Index (min) 00 F (S.U.S.) 20 F (S.U.S.) ASTM Grade Flash Point ( F) Complete Set Male Half Female Half High-Flow Coupler JHW8RH8D JHW8RH8DM JHW8RH8DF Regular-Flow Coupler JHW8R8D JHW8R8DM JHW8R8DF Pour Point ( F) API Gravity JHW8HG HYDRAULIC ACCESSORIES JHW8RH8DM JHW8G04W JHW8FB2F8M JHW8FG8MF A C D E F JHW8FR8M2F JHW8H22D06 JHW8R8D B JHW8HG INDUSTRIAL POWER TOOLS Couplings/Male Connectors Type Dimensions A B C D 8FC2F8F Couplings.8.02 )HPDOH»7) )HPDOH»7) 8FC8F Couplings.8.02 )HPDOH»7) )HPDOH»7) 8FN2M Male Connectors DOH»7) 0DOH»7) 8FN8M Male Connectors DOH»7) 0DOH»7) 8FN2M8M Male Connectors DOH»7) 0DOH»7) JHW8RH8D 8FC8F 8FN8M 8FN2M8M N7

18 Williams Flextensions Williams Flextensions are used extensively in engine and heavy equipment manufacturing, assembly and repair. They increase productivity by featuring an integrated (non-removable) design of the drive extension and socket to allow for reliable, continuous work without concern for the socket disconnecting from the extension as could happen with hand-tool type ball retained sockets. Available in a wide variety of SAE and Metric socket sizes and extension lengths, in both /2" and /8" square drives. Most all are available in Tension and Non-Tension models: Tension models have a spring-loaded collar which rides against the socket to speed alignment during placement on the fastener; Non-Tension sockets wobble freely on the extension ball joint. Metric Flextensions 6 pt 2 pt Socket Drive Drive Range Range 0 mm "- " " 2 mm "- " - mm "- " - mm "- " - 6 mm "- " " 8 mm "- " " SAE Flextensions 6 pt 2 pt Socket Drive Drive Range Range ;Ŵ@S "- " "- "?Ŵ>S "- " - Ŵ:S "- " - FLEXTENSIONS AŴ>S "- " - =Ŵ@S "- " - ;Ŵ<S "- " " =Ŵ>S "- " -. FOR /2 DRIVE.68 FOR /8 DRIVE.0 A Additional Features Made in the U.S.A. Durable black oxide finish. Socket retention pin is TIG welded, providing full rotation power to the socket. Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener. Drive end has a 7/2" cross hole & bevel for ease of use. Up to 0 degree angle offset. Flextensions are designed for use on hand and power tools (Impulse or Direct drive) NOT FOR IMPACT TOOL USE. Maximum working torque values: 60 Ft. Lbs. /20 In. Lbs. /27 Nm Other lengths and socket sizes available by special order. Contact your Snap-on representative. A B C D E Shank Length Socket Length Socket Diameter Socket Nose Diameter Socket Hex Depth in in. 0.0 in in in. ( mm) ( mm) (22.7 mm) ( mm) (7.-7. mm) in. ( mm) in. ( mm) 0.0 in. (22.7 mm) in. ( mm) 0.4 in. (8.6 mm) in. ( mm).06 in. (26. mm) 0.0 in. (22.7 mm) 0.76 in. (. mm) 0.4 in. (8.6 mm) in. ( mm).06 in. (26. mm) 0.0 in. (22.7 mm) 0.88 in. (22.4 mm) 0.42 in. (0.7 mm) in. ( mm).06 in. (26. mm) 0.0 in. (22.7 mm) 0.88 in. (22.4 mm) 0.42 in. (0.7 mm) in in..00 in..00 in in. ( mm) ( mm) (2.4 mm) (2.4 mm) ( mm) A B C D E Shank Length Socket Length Socket Diameter Socket Nose Diameter Socket Hex Depth in in in in in. ( mm) ( mm) ( mm) ( mm) ( mm) in. ( mm).06 in. (26. mm) 0.0 in. (22.7 mm) 0.76 in. (. mm) 0. in. (7.6 mm) in. ( mm).06 in. (26. mm) 0.0 in. (22.7 mm) 0.76 in. (. mm) 0. in. (7.6 mm) in in. 0.0 in in in. (0.-. mm) ( mm) (22.7 mm) ( mm) (4.-.2 mm) in in. 0.0 in. 0.0 in in. ( mm) ( mm) (22.7 mm) (22.7 mm) (8.-.2 mm) in in..00 in in in. ( mm) ( mm) (2.4 mm) ( mm) ( mm) in. (0.-. mm). in. (. mm).00 in. (2.4 mm).0 in. (.0 mm) 0.62 in.(.7 mm) E B D C N200 For the full selection of Flextensions please refer to the Flextensions Brochure or contact your Snap-on Representative. snapon.com/industrial

19 . FOR /2 DRIVE.68 FOR /8 DRIVE.0 Black Industrial Finish, SAE A /8" Drive Socket Flextensions Williams Flextensions are used extensively in engine and heavy equipment manufacturing, assembly and repair. They increase productivity by featuring an integrated (non-removable) design of the drive extension and socket to allow for reliable, continuous work without concern for the socket disconnecting from the extension as could happen with hand-tool type ball retained sockets. E B D C /8" DRIVE FLEXTENSIONS Features Made in the U.S.A. Durable black oxide finish. Socket retention pin is TIG welded, providing full rotation power to the socket. Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener. Drive end has a 7/2" cross hole & bevel for ease of use. Up to 0 degree angle offset. Flextensions are designed for use on hand and power tools (Impulse or Direct drive); NOT FOR IMPACT TOOL USE. Maximum working torque values: 60 Ft. Lbs. /20 In. Lbs. /27 Nm Other lengths and socket sizes available by special order. Contact your Snap-on Industrial representative. A B C D E Drive Shank Length Tension Socket Points Socket Socket Length Socket Diameter Nose Diameter Hex Depth JHWISFXT42 " 4.7"/6.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISFX42 " 4.7"/6.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISFXTD62 " 6.7"/66.MM Yes 2 " 0.8"/20.6MM 0.7"/.MM 0.60"/.2MM 0.4"/0.4MM JHWISFXT62 " 6.7"/66.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISFX62 " 6.7"/66.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISFXT22 " 2.7"/.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISFXT44 " 4.7"/6.MM Yes 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISFX44 " 4.7"/6.MM No 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISFXT64 " 6.7"/66.MM Yes 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISFX64 " 6.7"/66.MM No 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISFXT46 " 4.7"/6.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFX46 " 4.7"/6.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXT66 " 6.7"/66.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSX66 " 6.7"/66.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXT26 " 2.7"/.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXT48 " 4.7"/6.MM Yes 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISFX48 " 4.7"/6.MM No 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISFXT68 " 6.7"/66.MM Yes 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISFX68 " 6.7"/66.MM No 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISFXT420 " 4.7"/6.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISFX420 " 4.7"/6.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISFXT620 " 6.7"/66.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISFX620 " 6.7"/66.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM N20

20 /8" Drive Socket Flextensions Williams Flextensions are used extensively in engine and heavy equipment manufacturing, assembly and repair. They increase productivity by featuring an integrated (non-removable) design of the drive extension and socket to allow for reliable, continuous work without concern for the socket disconnecting from the extension as could happen with hand-tool type ball retained sockets. Black Industrial Finish, Metric A B C D E Drive Shank Length Tension Socket Socket Socket Length Socket Diameter Socket Nose Socket Hex Points (mm) Diameter Depth JHWISFXTM40 " 4.7"/6.MM Yes "/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISFXM40 " 4.7"/6.MM No "/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISFXTM60 " 6.7"/66.MM Yes "/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISFXM60 " 6.7"/66.MM No "/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISFXTM42 " 4.7"/6.MM Yes "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXM42 " 4.7"/6.MM No "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXTM62 " 6.7"/66.MM Yes "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXM62 " 6.7"/66.MM No "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXTM4 " 4.7"/6.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXM4 " 4.7"/6.MM No 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXTM6 " 6.7"/66.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXM6 " 6.7"/66.MM No 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISFXTM4 " 4.7"/6.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISFXM4 " 4.7"/6.MM No 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISFXTM6 " 6.7"/66.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISFXM6 " 6.7"/66.MM No 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISFXTM46 " 4.7"/6.MM Yes "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISFXM46 " 4.7"/6.MM No "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISFXTM66 " 6.7"/66.MM Yes "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISFXM66 " 6.7"/66.MM No "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM /8" DRIVE FLEXTENSIONS. FOR /2 DRIVE.68 FOR /8 DRIVE.0 A Features Made in the U.S.A. Durable black oxide finish. Socket retention pin is TIG welded, providing full rotation power to the socket. Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener. Drive end has a 7 2" cross hole & bevel for ease of use. Up to 0 degree angle offset. Flextensions are designed for use on hand and power tools (Impulse or Direct drive); NOT FOR IMPACT TOOL USE. Maximum working torque values: 60 Ft. Lbs. /20 In. Lbs. /27 Nm Other lengths and socket sizes available by special order. Contact your Snap-on Industrial representative. E B D C N202 snapon.com/industrial

21 /2" Drive Socket Flextensions Williams Flextensions are used extensively in engine and heavy equipment manufacturing, assembly and repair. They increase productivity by featuring an integrated (non-removable) design of the drive extension and socket to allow for reliable, continuous work without concern for the socket disconnecting from the extension as could happen with hand-tool type ball retained sockets. Black Industrial Finish, SAE. FOR /2 DRIVE.68 FOR /8 DRIVE /2" DRIVE FLEXTENSIONS A B C D E Drive Shank Length Tension Socket Points Socket Socket Length Socket Diameter Nose Diameter Hex Depth JHWISSXT2 ".02"/76.7MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSX2 ".02"/76.7MM No 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSXT42 " 4.0"/0.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSX42 " 4.0"/0.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISXTD62A " 6.7"/66.MM Yes 2 " 0.8"/20.6MM 0.7"/.MM 0.60"/.2MM 0.4"/0.4MM JHWISSX62 " 6.7"/66.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSXT2 ".7"/24.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSX2 ".7"/24.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSXT4 ".02"/76.7MM Yes 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISSX4 ".02"/76.7MM No 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISSXT44 " 4.0"/0.MM Yes 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISSX44 " 4.0"/0.MM No 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISSXT64 " 6.7"/66.MM Yes 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISSX64 " 6.7"/66.MM No 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISSXT4 ".7"/24.MM Yes 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISSX4 ".7"/24.MM No 6 7»6".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0."/7.6MM JHWISSXT6 ".02"/76.7MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSX6 ".02"/76.7MM No 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXT46 " 4.0"/0.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSX46 " 4.0"/0.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXT66 " 6.7"/66.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSX66 " 6.7"/66.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXT6 ".7"/24.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSX6 ".7"/24.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXT48 " 4.0"/0.MM Yes 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISSX48 " 4.0"/0.MM No 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWSPSXTL68 " 6.7"/66.MM Yes 6»6" 0.78"/.8MM 0.0"/22.7MM 0.76"/.4MM 0.6"/4.MM JHWSPSXL68 " 6.7"/66.MM No 6»6" 0.78"/.8MM 0.0"/22.7MM 0.76"/.4MM 0.6"/4.MM JHWISSXT68 " 6.7"/66.MM Yes 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISSX68 " 6.7"/66.MM No 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISSXT8 ".7"/24.MM Yes 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISSX8 ".7"/24.MM No 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISSXT28 " 2.7"/.MM Yes 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISSX28 " 2.7"/.MM No 6»6".06"/26.MM 0.0"/22.7MM 0.82"/20.8MM 0.44"/.2MM JHWISSXT20 ".02"/76.7MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISSX20 ".02"/76.7MM No 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISSXT420 " 4.0"/0.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISSX420 " 4.0"/0.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISSXT620 " 6.7"/66.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISSX620 " 6.7"/66.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHISSX620S7 " 6.7"/66.MM No 6 " 0.7"/24.7MM 0.0"/22.7MM 0.0"/22.7MM 0."/8.MM JHWISSXT20 ".7"/24.MM Yes 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISSX20 ".7"/24.MM No 6 ".06"/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISSXT24 ".02"/76.7MM Yes 6 ".2"/.8MM.00"/2.4MM.2"/28.4MM 0.6"/4.2MM JHWISSX24 ".02"/76.7MM No 6 ".2"/.8MM.00"/2.4MM.2"/28.4MM 0.6"/4.2MM.0 A E B D C N20

22 N204 /2" DRIVE FLEXTENSIONS /2" Drive Socket Flextensions Williams Flextensions are used extensively in engine and heavy equipment manufacturing, assembly and repair. They increase productivity by featuring an integrated (nonremovable) design of the drive extension and socket to allow for reliable, continuous work without concern for the socket disconnecting from the extension as could happen with handtool type ball retained sockets. Black Industrial Finish, SAE A B C D E Drive Shank Length Tension Socket Points Socket Socket Length Socket Diameter Nose Diameter Hex Depth JHWISSXT424 " 4.0"/0.MM Yes 6 ".2"/.8MM.00"/2.4MM.2"/28.4MM 0.6"/4.2MM JHWISSX424 " 4.0"/0.MM No 6 ".2"/.8MM.00"/2.4MM.2"/28.4MM 0.6"/4.2MM JHWISSXT624 " 6.7"/66.MM Yes 6 ".2"/.8MM.00"/2.4MM.2"/28.4MM 0.6"/4.2MM JHWISSX624 " 6.7"/66.MM No 6 ".2"/.8MM.00"/2.4MM.2"/28.4MM 0.6"/4.2MM JHWISSX624MD " 6.7"/66.MM No 6 " 0.8"/2.6MM.00"/2.4MM.2"/28.4MM 0."/7.MM JHWISDX624LD " 6.7"/66.MM No 2 " 0.8"/2.6MM.00"/2.4MM.00"/2.4MM 0."/7.MM JHWISSXT24 ".7"/24.MM Yes 6 ".2"/.8MM.00"/2.4MM.2"/28.4MM 0.6"/4.2MM JHWISSX24 ".7"/24.MM No 6 ".2"/.8MM.00"/2.4MM.2"/28.4MM 0.6"/4.2MM JHWISSXT40 " 4.0"/0.MM Yes 6»6"."/.MM.00"/2.4MM.0"/.0MM 0.62"/.7MM JHWISSX40 " 4.0"/0.MM No 6»6"."/.MM.00"/2.4MM.0"/.0MM 0.62"/.7MM JHWISSXT60 " 6.7"/66.MM Yes 6»6"."/.MM.00"/2.4MM.0"/.0MM 0.62"/.7MM JHWISSX60 " 6.7"/66.MM No 6»6"."/.MM.00"/2.4MM.0"/.0MM 0.62"/.7MM JHWISSXT0 ".7"/24.MM Yes 6»6"."/.MM.00"/2.4MM.0"/.0MM 0.62"/.7MM JHWISSX0 ".7"/24.MM No 6»6"."/.MM.00"/2.4MM.0"/.0MM 0.62"/.7MM JHWISSXT20 " 2.7"/.MM Yes 6»6"."/.MM.00"/2.4MM.0"/.0MM 0.62"/.7MM JHWISSX20 " 2.7"/.MM No 6»6"."/.MM.00"/2.4MM.0"/.0MM 0.62"/.7MM. FOR /2 DRIVE.68 FOR /8 DRIVE Features Made in the U.S.A. Durable black oxide finish. Socket retention pin is TIG welded, providing full rotation power to the socket. Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener. Drive end has a 7/2" cross hole & bevel for ease of use. Up to 0 degree angle offset. Flextensions are designed for use on hand and power tools (Impulse or Direct drive); NOT FOR IMPACT TOOL USE. Maximum working torque values: 60 Ft. Lbs. /20 In. Lbs. /27 Nm Other lengths and socket sizes available by special order. Contact your Snap-on Industrial Brands representative. Black Industrial Finish, Metric A B C D E Socket Socket Socket Nose Drive Shank Length Tension Socket Length Socket Diameter Socket Hex Depth Points (mm) Diameter JHWISSXTM40 " 4.0"/0.MM Yes "/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSXM40 " 4.0"/0.MM No "/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM ISSXTMD60 " 6.7"/66.MM Yes 2 0.0"/.0MM 0.0"/22.7MM 0."/.0MM 0."/7.MM JHWISSXM60 " 6.7"/66.MM No "/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSXTM0 ".7"/24.MM Yes "/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSXM0 ".7"/24.MM No "/26.MM 0.0"/22.7MM 0.6"/6.0MM 0.28"/7.MM JHWISSXTM42 " 4.0"/0.MM Yes "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXM42 " 4.0"/0.MM No "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXTM62 " 6.7"/66.MM Yes "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXM62 " 6.7"/66.MM No "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXTM2 ".7"/24.MM Yes "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXM2 ".7"/24.MM No "/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXTM4 " 4.0"/0.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXM4 " 4.0"/0.MM No 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXTM6 " 6.7"/66.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXM6 " 6.7"/66.MM No 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM snapon.com/industrial A E B D C

23 . FOR /2 DRIVE.68 FOR /8 DRIVE.0 Black Industrial Finish, Metric A /2" Drive Socket Flextensions Williams Flextension are used extensively in engine and heavy equipment manufacturing, assembly and repair. They increase productivity by featuring an integrated (non-removable) design of the drive extension and socket to allow for reliable, continuous work without concern for the socket disconnecting from the extension as could happen with hand-tool type ball retained sockets. E B D C /2" DRIVE FLEXTENSIONS Features Made in the U.S.A. Durable black oxide finish. Socket retention pin is TIG welded, providing full rotation power to the socket. Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener. Drive end has a 7/2" cross hole & bevel for ease of use. Up to 0 degree angle offset. Flextensions are designed for use on hand and power tools (Impulse or Direct drive); NOT FOR IMPACT TOOL USE. Maximum working torque values: 60 Ft. Lbs. /20 In. Lbs. /27 Nm Other lengths and socket sizes available by special order. Contact your Snap-on Industrial representative. A B C D E Drive Shank Length Tension Socket Points Socket (mm) Socket Length Socket Diameter Socket Nose Diameter Socket Hex Depth JHWISSXTM ".7"/24.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXM ".7"/24.MM No 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISXTM0 " 0.7"/268.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXM0 " 0.7"/268.MM No 6.06"/26.MM 0.0"/22.7MM 0.76"/.MM 0.4"/8.6MM JHWISSXTM4 " 4.0"/0.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISSXM4 " 4.0"/0.MM No 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISSXTM6 " 6.7"/66.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISSXM6 " 6.7"/66.MM No 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISSXTM ".7"/24.MM Yes 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISSXM ".7"/24.MM No 6.06"/26.MM 0.0"/22.7MM 0.88"/22.4MM 0.42"/0.7MM JHWISSXTM46 " 4.0"/0.MM Yes "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISSXM46 " 4.0"/0.MM No "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISSXMD46 " 4.0"/0.MM No "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISSXTM66 " 6.7"/66.MM Yes "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISSXM66 " 6.7"/66.MM No "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWSPSXMD66 " 6.7"/66.MM No "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.44"/.2MM JHWISSXTM6 ".7"/24.MM Yes "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISSXM6 ".7"/24.MM No "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISXTM06 " 0.7"/268.MM Yes "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISSXM06 " 0.7"/268.MM No "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISXTM26 " 2.7"/.MM Yes "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISSXM26 " 2.7"/.MM No "/26.MM 0.0"/22.7MM 0.0"/22.7MM 0.4"/.4MM JHWISSXTM48 " 4.0"/0.MM Yes "/26.MM.00"/2.4MM.00"/2.4MM 0.4"/.4MM JHWISSXM48 " 4.0"/0.MM No "/26.MM.00"/2.4MM.00"/2.4MM 0.4"/.4MM JHWSPSXMD48 " 4.0"/0.MM No "/22.4MM.00"/2.4MM.00"/2.4MM 0.0"/7.6MM JHWISSXTM68 " 6.7"/66.MM Yes "/26.MM.00"/2.4MM.00"/2.4MM 0.4"/.4MM JHWISSXM68 " 6.7"/66.MM No "/26.MM.00"/2.4MM.00"/2.4MM 0.4"/.4MM JHWSPSXMD68 " 6.7"/66.MM No "/22.4MM.00"/2.4MM.00"/2.4MM 0.0"/7.6MM JHWISSXTM8 ".7"/24.MM Yes "/26.MM.00"/2.4MM.00"/2.4MM 0.4"/.4MM JHWISSXM8 ".7"/24.MM No "/26.MM.00"/2.4MM.00"/2.4MM 0.4"/.4MM JHWISXTM08 " 0.7"/268.MM Yes "/26.MM.00"/2.4MM.00"/2.4MM 0.4"/.4MM JHWISSXM08 " 0.7"/268.MM No "/26.MM.00"/2.4MM.00"/2.4MM 0.4"/.4MM N20

24 N220 0 Service Wrenches, Metric Ultra thin pattern for use on jam nuts and access to confined areas 0 offset head Satin chrome finish Satin Chrome Finish, Metric Overall Head (mm) Length Diameter JHWM 6»6 JHW2M 2 6»6 JHW22M 22 6»6 JHW24M JHW27M JHW0M 0 7 2»6 JHW2M 2 7 2»6 JHW6M JHW7M JHW8M JHW40M JHW4M JHW42M JHW44M JHW46M 46 8 JHW48M 48 8 JHW0M 0 8 JHW2M 2 8 JHWM 8 JHW60M 60 JHW6M 6 Fed. Spec: GGG-W-66E Type 7 Class M Head Thickness JHWMWS-0 0 Piece Service Wrench Set, MM in Roll Pouch - JHWR-A WRENCHES JHW7M JHWMWS-0 (MM) (MM) JHWM JHW0M 0 JHW2M 2 JHW2M 2 JHW22M 22 JHW6M 6 JHW24M 24 JHW8M 8 JHW27M 27 JHW40M 40 snapon.com/industrial »6»6»6»6»6»6»6 JHW42 JHWWS-0 0 Service Wrenches, SAE Ultra thin pattern for use on jam nuts and access to confined areas 0 offset head Satin chrome finish Satin Chrome Finish, SAE Overall Head Length Diameter JHW24 6»6 JHW26»6 6»6 JHW28 7 6»6 JHW0» JHW JHW4» JHW6 7 2»6 JHW8»6 7 2»6 JHW40 7 2»6 JHW42»6 7 2 JHW JHW46 7»6 7 2 JHW JHW0»6 7 2 JHW2 7 2 JHW4»6 7 2 JHW6 8 JHW8»6 8 JHW JHW62»6 8 JHW JHW JHW JHW76 2 Fed. Spec: GGG-W-66E Type 7 Class Head Thickness JHWWS-0 0 Piece Service Wrench Set, SAE in Roll Pouch - JHWR-A JHW24 JHW4»6 JHW26»6 JHW6 JHW28 7 JHW8»6 JHW0»6 JHW40 JHW2 JHW44»6»6»6»6»6»6»6»6

25 -60 Double Open End Angle-Head Wrenches Wrench heads are offset at and 60 to the handle Both ends are the same size to permit the wrench to be used in four different positions 4 chamfer on wrench ends allow easy placement of wrench on the fastener Continuous arc design minimizes spreading and is stronger than V design Thin head is perfect for tight clearances Satin chrome finish provides good grip and cleans easily Chrome Satin Finish, SAE JHW72 A B C Head Diameter 2 JHW74 7»6 7 Head Thickness Overall Length JHW76 7 JHW78»6 6 JHW720»6 6 JHW722»6»6 7 JHW724 7»6 7 JHW726»6 7 JHW JHW72»6»6 JHW74»6 2»6»6 0 JHW76 2»6 JHW740 2 JHW744 2»6 2 JHW746 7»6 2»6 2 JHW748 2»6 2 JHW72»64 JHW74»6 6 JHW76 7»6 7 7 JHW78»6»6 7 7 JHW760 7»6»6 8 JHW764 2»6 Fed. Spec. ANSI B07. Type 2 Class JHW780 Piece Double Open End Wrench Set, SAE, in Roll Pouch JHW72 JHW78»6 JHW74 7»6 JHW720 JHW76 JHW782 0 Piece Double Open End Wrench Set, SAE, in Roll Pouch JHW72 JHW722»6 JHW74 7»6 JHW724 JHW76 JHW726»6 JHW78»6 JHW728 7 JHW720 JHW72 JHW72 JHW780 JHW782 WRENCHES N22

26 N222 Wrenches Sets * JHW26RSC Red Yellow JHWWS70RSC JHWWS7RSC JHWWS72RSC JHWWS70YSC JHWWS7YSC JHWWS72YSC 7 Pieces Set in Pouch A Overall Length Pieces Set in Pouch JHW26YSC B Open End Width 4 Pieces Set in Pouch C Open End Thickness 7 Pieces Set in Pouch D Box End Diameter JHW22RSC JHW22YSC 6»6»6»6 JHW24RSC JHW24YSC 7»6 7»6 7»6 JHW26RSC JHW26YSC 8»6 JHW28RSC JHW28YSC»6 8 7 JHW220RSC JHW220YSC»6 JHW222RSC JHW222YSC»6 0»6 JHW224RSC JHW224YSC»6»6 JHW226RSC JHW226YSC»6 7 JHW228RSC JHW228YSC 7 2 7»6 JHW20RSC JHW20YSC»6 2 7»6 JHW22RSC JHW22YSC 4 2 JHW24RSC JHW24YSC»6 4 2»6 JHW26RSC JHW26YSC JHW240RSC JHW240YSC 7 2 2»6»6 Pieces Set in Pouch E Box End Thickness 4 Pieces Set in Pouch JHW22_SC Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ JHW24_SC 7»6 Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ JHW26_SC Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ JHW28_SC»6 Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ JHW220_SC Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ JHW222_SC»6 Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ JHW224_SC Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ JHW226_SC»6 Ɣ Ɣ Ɣ Ɣ JHW228_SC 7 Ɣ Ɣ Ɣ Ɣ JHW20_SC»6 Ɣ Ɣ Ɣ Ɣ JHW22_SC Ɣ Ɣ Ɣ Ɣ JHW24_SC»6 Ɣ Ɣ JHW26_SC Ɣ Ɣ JHW240_SC Ɣ Ɣ *Note: Replace the underscore with R or Y to get the correct For example, JHW22_SC would become JHW22RSC for Red, and JHW22YSC for yellow. WRENCHES JHWWS70RSC JHWWS70YSC snapon.com/industrial JHWWS7RSC JHWWS7YSC JHWWS72RSC JHWWS72YSC 7»6 7»6 2»6

27 Combination Ratcheting Wrenches 72-tooth gear requires only of ratcheting arc to engage next gear High polish satin-chrome finish cleans easily & protects against corrosion Thin profile is perfect for tight clearances where accessibility is critical 2-point ratcheting box end allows for superior fastener engagement High Polish Chrome Finish, 2 Point, SAE A B C D E Open End Open End Box End Width Thickness Diameter Overall Length JHW208NRC "» JHW20NRC»6"» JHW22NRC " 6» JHW24NRC 7»6" 6 JHW26NRC " 7 JHW28NRC»6" 7» JHW220NRC " 8»6» JHW222NRC»6"»»6 JHW224NRC " 0»6 JHW226NRC»6" JHW228NRC 7 " JHW20NRC»6" 2 JHW22NRC " 2 JHW24NRC»6" JHW26NRC " 6 2 2»6 JHW28NRC " 6 2 2»6 JHWS-20NRC Piece Combination Wrench, in Pouch JHW208NRC " JHW28NRC»6" JHW20NRC»6" JHW220NRC " JHW22NRC " JHW222NRC»6" JHW24NRC 7»6" JHW224NRC " JHW26NRC " JHWS-2NRC Piece Combination Wrench, in Pouch JHW22NRC " JHW220NRC " JHW228NRC 7 " JHW24NRC 7»6" JHW222NRC»6" JHW20NRC»6" JHW26NRC " JHW224NRC " JHW22NRC " JHW28NRC»6" JHW226NRC»6" JHWS-22NRC 6 Piece Combination Wrench, in Pouch JHW208NRC " JHW220NRC " JHW22NRC " JHW20NRC»6" JHW222NRC»6" JHW24NRC»6" JHW22NRC " JHW224NRC " JHW26NRC " JHW24NRC 7»6" JHW226NRC»6" JHW28NRC " JHW26NRC " JHW228NRC 7 " JHW28NRC»6" JHW20NRC»6" Box End Thickness WRENCHES JHW208NRC JHWS-20NRC JHWS-2NRC JHWS-22NRC N22

28 JHW206MNRC JHMWS-2NRC JHMWS-24NRC JHMWS-2NRC JHMWS-26NRC WRENCHES Combination Ratcheting Wrenches 72-tooth gear requires only of ratcheting arc to engage next gear High polish satin-chrome finish cleans easily & protects against corrosion Thin profile is perfect for tight clearances where accessibility is critical 2-point ratcheting box end allows for superior fastener engagement High Polish Chrome Finish, 2 Point, MM A B C D E Overall Length Open End Width Open End Thickness Box End Diameter Box End Thickness (MM) JHW206MNRC 6 JHW207MNRC 7 JHW208MNRC 8 JHW20MNRC JHW20MNRC JHW2MNRC 6 7 JHW22MNRC JHW2MNRC 7 JHW24MNRC 4 7 JHW2MNRC 7 7» JHW26MNRC 6 8» JHW27MNRC 7 JHW28MNRC 8 JHW2MNRC 7 JHW220MNRC 20 7 JHW22MNRC 2 7 JHW222MNRC 22 7 JHW22MNRC 2 7 JHW224MNRC JHW22MNRC JHW226MNRC JHW227MNRC JHW228MNRC JHW20MNRC JHW22MNRC JHMWS-2NRC Piece Combination Wrench, in Pouch (MM) (MM) (MM) JHW206MNRC 6 JHW20MNRC JHW22MNRC 2 JHW207MNRC 7 JHW20MNRC 0 JHW2MNRC JHW208MNRC 8 JHW2MNRC JHW24MNRC 4 JHMWS-24NRC 4 Piece Combination Wrench, in Pouch (MM) (MM) (MM) (MM) JHW206MNRC 6 JHW20MNRC 0 JHW24MNRC 4 JHW28MNRC 8 JHW207MNRC 7 JHW2MNRC JHW2MNRC JHW2MNRC JHW208MNRC 8 JHW22MNRC 2 JHW26MNRC 6 JHW20MNRC JHW2MNRC JHW27MNRC 7 JHMWS-2NRC Piece Combination Wrench, in Pouch (MM) (MM) (MM) (MM) JHW206MNRC 6 JHW2MNRC JHW26MNRC 6 JHW22MNRC 2 JHW207MNRC 7 JHW22MNRC 2 JHW27MNRC 7 JHW222MNRC 22 JHW208MNRC 8 JHW2MNRC JHW28MNRC 8 JHW22MNRC 2 JHW20MNRC JHW24MNRC 4 JHW2MNRC JHW224MNRC 24 JHW20MNRC 0 JHW2MNRC JHW220MNRC 20 JHMWS-26NRC 2 Piece Combination Wrench, in Pouch (MM) (MM) (MM) (MM) (MM) JHW206MNRC 6 JHW2MNRC JHW26MNRC 6 JHW22MNRC 2 JHW226MNRC 26 JHW207MNRC 7 JHW22MNRC 2 JHW27MNRC 7 JHW222MNRC 22 JHW227MNRC 27 JHW208MNRC 8 JHW2MNRC JHW28MNRC 8 JHW22MNRC 2 JHW228MNRC 28 JHW20MNRC JHW24MNRC 4 JHW2MNRC JHW224MNRC 24 JHW20MNRC 0 JHW20MNRC 0 JHW2MNRC JHW220MNRC 20 JHW22MNRC 2 JHW22MNRC 2 M N224 snapon.com/industrial

29 JHW002 Square and Hex Drive Ratchet Length " Drives 4" Drive Sockets & 4" Hex Bits Ratcheting Flare Nut Wrenches Designed for use on 6 and 2 point tube fittings, fasteners, valves and compression fittings. Unique design requires only 0 rotation for ratcheting action. High carbon steel jaws snap open, then close around fastener with 6 point contact. Prevents distortion of thin-walled fitting. Allow easy access to tight locations. Black Industrial Finish, 2 Point, SAE JHWRFW-24 JHW002 Overall Length Head Diameter JHWXFN-68 Head Thickness JHWRFW-2»6 JHWRFW-4 7»6»6 JHWRFW-6»6 JHWRFW-8»6 7 JHWRFW-20 7 JHWRFW-22»6 7 JHWRFW-24 7 JHWRFW-26»6»6 JHWRFW-28 7»6 JHWRFW-0»6»6 JHWRFW-2»6 Double Head Flare Nut Wrenches Will not mar fittings on pipes and tubing. Satin chrome textured finish provides great feel and extra gripping power. Recessed corners in ends provide extra turning power. Chrome Satin Finish, 6 Point, SAE A B C D E Overall Length JHWXFN-080 x» JHWXFN-24 x 7»6»6 JHWXFN-68 x»6 6»6 Open End Dia 2»6 JHWXFN-2022 x»6 7 JHWXFN-242 x JHWXFN x 0. 7»6 Fed. Spec.: ANSI B07.6 Open End Thickness»6 Open End Dia 27 Open End Thickness 7»6»6»6 JHWWS-4 Piece Double Head Flare Nut Wrench Set, 6 Point, SAE, in Roll Pouch R-4 JHWXFN-24 x 7»6 JHWXFN-68 x»6 JHWXFN-2022 x»6 JHWXFN-242 x JHWXFN x WRENCHES JHWWS-4»6 N22

30 N226 WRENCHES JHWAPC-0A JHWAP-0A JHWAP-SET JHWAB-0A JHWAB-SET snapon.com/industrial Adjustable Wrench Chrome plated finish allows for easy cleaning after each use. Serrated knurl is designed for quick and smooth adjustments. I-Beam designed handle provides strength and durability. Inch (SAE) scale is laser-etched on head face for easy determination of bolt head width. Chrome Finish Length Maximum Jaw Opening Head Thickness JHWAP-4A 4 JHWAP-6A 6 7»6 JHWAP-8A 8 JHWAP-0A 0»64»64 JHWAP-2A 2»6 2 JHWAP-A»6»64 JHWAP-8A 8 2»6 7»64 JHWAP-24A »6 6»64 JHWAP-SET Piece Chrome Adjustable Wrench Set JHWAP-6A 6 JHWAP-8A 8 JHWAP-0A 0 ASTM 07.8 Adjustable Wrench Drop forged, heat treated industrial finish with satin finish handles for firm safe grip. Inch (SAE) scale is laser-etched on head face for easy determination of bolt head width. Black Finish Length Maximum Jaw Opening Head Thickness JHWAB-4A 4 JHWAB-6A 6 7»6 JHWAB-8A 8 JHWAB-0A 0»64»64 JHWAB-2A 2»6 2 JHWAB-A»6»64 JHWAB-8A 8 2»6 7»64 JHWAB-24A »6 6»64 JHWAB-SET Piece Black Adjustable Wrench Set JHWAB-6A 6 JHWAB-8A 8 JHWAB-0A 0 ASTM 07.8 Adjustable Wrench Comfort thermoplastic grips cushion the handle surface and stay comfortable even in extreme temperatures. Chrome plated finish allows for easy cleaning. Serrated knurl is designed for quick and smooth adjustments. I-Beam designed handle provides strength and durability. Inch (SAE) scale is laser-etched on head face for easy determination of bolt head width. Comfort Grip Length Maximum Jaw Opening Head Thickness JHWAPC-6A 4 7 JHWAPC-8A 6 JHWAPC-0A 0»64 JHWAPC-2A 2»6 ASTM 07.8»64 2

31 Adjustable Wrenches Measurement scale on head conveniently shows fastener size. Chrome wrenches are fully polished for easy clean-up. Exceed ANSI specifications for strength. Precision hardened and anti-corrosion treated. Heavy Duty Industrial Grade Adjustable Wrenches JHW404A Length Maximum Jaw Opening Chrome Finish: JHW404A 4 JHW406A 6»6 JHW408A 8»6 JHW40A 0 JHW42A 2 JHW4A 2 Head Thickness 7»6 2»6 JHW48A 8 2»6 JHW424A »6 Black Phosphate Finish: JHW604A 4 JHW606A 6»6 JHW608A 8»6 JHW60A 0 JHW62A 2 JHW6A 2 7»6 2»6 JHW68A 8 2»6 JHW624A »6 Fed. Spec.: ANSI B07.8M JHW60A Side Nut Adjustable Wrenches Side nut adjustable wrenches for heavy duty applications Forged in one piece for better performance Head angle provides better accessibility Measurement scale on head conveniently shows fastener size. Comfortable Bigger and Rounded Handles Length (Inches) CUS Maximum Jaw Opening (Inches) Head Thickness (Inches) Jaw Tip Thickness (Inches) Chrome Finish CUS 6 2CUS 8»6 CUS 0»6 4CUS 2 CUS 2 6CUS 2 2»6 7CUS 0 Ratcheting Adjustable Wrenches Easy to use in limited space Comfort Grip JHW42A Overall Length Maximum Jaw Opening JHW06 6»6 JHW08 8»6 JHW0 0»6 JHW642A JHW42A 4 Piece Chrome Adjustable Wrench Set, in Vinyl Pouch JHW000A JHW406A 6 JHW40A 0 JHW408A 8 JHW42A 2 JHW642A 4 Piece Black Adjustable Wrench Set, in Vinyl Pouch JHW000A JHW606A 6 JHW60A 0 JHW0 Head Thickness JHW4 Piece Ratcheting Adjustable Set, in Pouch JHW06 6 JHW0 0 JHW08 8 Side Nut Adjustable Wrenches Heavy Duty adjustable wrench with side nut operating system Smooth movement and precision adjustment Head angle provides better accessibility Measurement scale on head conveniently shows fastener size Comfortable Non-Slip Thermoplastic Grip Handle Length (Inches) Series Maximum Jaw Opening (Inches) Head Thickness (Inches) Black Phosphate Finish 70US 6 7US 8»6 72US 0 7US 2»6 WRENCHES Bahco Side Nut Adjustable Wrenches are members of the exclusive adjustable wrench system which allows the user to apply the highest torque values in adjustable wrenches at the same time benefiting from a very precise adjustment of the jaws. Exceeds torque requirement of both ISO and ASME standards. Perfect for heavy duty industrial users and mechanics who demand high torque resistance and fine jaw adjustment and alignment. 7»6»6»6 Jaw Tip Thickness (Inches)»6 N227

32 Adjustable Construction Wrench Tapered spud handle locates and aligns bolts and rivets. Hole in handle permits tethering wrench for safety. Measurement scale on head conveniently shows fastener size. Economical black phosphate finish resists rust. Heavy-Duty With Polished Head and Measurement Scales Length Maximum Jaw Opening JHW62A 6 JHW06B Single Head Open End Offset Structural Wrenches Long offset handle is designed for clearance of obstructions while providing greater leverage. Tapered spud handle locates and aligns bolt and rivet holes. Head Thickness Industrial Black Finish, SAE A B C D Overall Open End Open End Handle Length Width Thickness #2 JHW04A»6 7 JHW0 7 4»6 2»6 JHW06»6 4»6 JHW06B 4 2 JHW07»6 6»6 2 JHW07A 6»6 2 JHW08 7»6 2 2»6 JHW08A»6 8 2»6 2 JHW0 7»6 2 JHW0A 7 2 JHW0 2»6 7 7 JHW»6 2 JHWA 7 22»6 2 JHW WRENCHES 2 JHW206B Single Head Open End Construction Wrenches open end provides two gripping angles when wrench is turned over. Tapered spud handle locates and aligns bolt and rivet holes. Industrial Black Finish, SAE JHW62A A B C Overall Length Open End Width Open End Thickness JHW204A 2 2 JHW »6 JHW206»6 4 2 JHW206B 2 JHW207»6 6»6 2 7»6 2 JHW207A 7 2»6»6 JHWQ-208 8» JHW208A» JHW20 7» JHW20A 8 2»6 JHWQ-20 22»6 2 7 JHW2»6 2 4 JHW2A 7 2 4»6»6 N228 snapon.com/industrial

33 Offset Structural Box Wrenches Offset from handle to permit clearance of obstructions Handles are tapered for insertion into bolt holes Industrial Black Finish Industrial Black Finish, SAE A B C Overall Length Head Diameter #2 at End JHW80A»6 2 2 JHW JHW806»6 2 6»64 JHW806B 2 6»64 JHW807»6»64 2»64 JHW807A»64 2»64 JHW »64 2 2»64 JHW808A»6 7 2»64 2 2»64 JHW80 7» JHW80A JHW JHW80A» JHW8» JHW8A JHW JHW8 2»6 26 JHW »6 JHW8 2»6 0 2»6 JHW Fed. Spec: GGG-W-66E Type Class 2 Hammer Wrenches Designed for use in the petrochemical industries where clearance, particularly on flanges, and cored fasteners are often a problem: 6 Point Hex is offset degree, and short handle length allows for use in tight spaces Straight Handle transfers maximum torque when struck Assortment fits Stud s up to 2-2" 6 Point Wrench Opening (Nut ) Head Dia. #"&'!),# Overall Length JHW-604»6 2 7 JHW JHW »6 2 7»64 7 0»6 JHW-602 2»64 6»64 JHW-608» »64»6 JHW »6 JHW »6 2 JHW »6 2 JHW »6 7 2»6 JHW »64 7»6 JHW-604 2»6 4 2»64 7 7»6 JHW-600 4»64»6 JHW JHW-624 7» JHW807A JHW-604 WRENCHES N22

34 Pipe Wrenches Aluminum pipe wrenches are approximately 40% lighter than cast iron. Heavy duty construction for strength and durability. Scale on wrench indicates pipe diameter. Aluminum, Heavy Duty Overall Capacity Maximum Jaw Opening Hook Jaw Spare Parts Heel Jaw & Pin Knurl Nut JHW00 8»6 JHW JHW67 JHW7 JHW02 0 JHW2 JHW62 JHW72 JHW JHW JHW6 JHW7 JHW06 4 2»6 JHW4 JHW64 JHW74 JHW08 8 JHW JHW6 JHW7 JHW0 24 JHW6 JHW66 JHW76 JHW2 6 JHW7 JHW68 JHW77 JHW JHW8 JHW6 JHW78 Pipe Wrench Set JHW42 PIPE WRENCHES JHW00 JHW42 Piece Aluminum Pipe Wrench Set. Includes 8", 2", and 8" wrenches Pipe Wrenches Heavy duty construction for strength and durability Scale on wrench indicates pipe diameter Cast Iron, Heavy-Duty Overall Capacity Maximum Jaw Opening Hook Jaw Spare Parts Heel Jaw & Pin Knurl Nut JHW6 6 7 JHW0 JHW60 JHW70 JHW8 8»6 JHW JHW67 JHW7 JHW20 0 JHW2 JHW62 JHW72 JHW JHW JHW6 JHW7 JHW24 4 2»6 JHW4 JHW64 JHW74 JHW26 8 JHW JHW6 JHW7 JHW28 24 JHW6 JHW66 JHW76 JHW0 6 JHW7 JHW68 JHW77 JHW JHW8 JHW6 JHW78 Pipe Wrench Set JHW44 JHW6 JHW44 Piece Cast Iron Pipe Wrench Set. Includes 8", 2", and 8" wrenches N20 snapon.com/industrial

35 Chain Pipe Tongs Chain swings from the center and can be used on either side of the jaws, reducing tooth wear. Flat link chains are heat-treated for greater strength and reliability. Fully adjustable to fit any shape pipe. Pipe Gripping Width Tong Length Chain Length Weight GWRC2-P lbs. GWRC-P lbs. GWRC-P lbs. GWRC4-P lbs. GWRC-P lbs. Replacement Parts for Pipe Tongs Chain is heat-treated after assembly which results in a 40 % increase in strength as well as an extended chain life and improved performance. Jaws are drop forged from carbon steel and heat treated to provide the strength and reliability expected from Williams pipe tools. Replacement Jaws Replacement Chain Jaw Bolt & Nut Chain Tensile Strength GWRC2-P GWRC2 GWRC22-P GWRHB2,800 lbs. GWRC-P GWRC GWRC2-P GWRHB24 7,600 lbs. GWRC-P GWRC GWRC2-P GWRHB2 20,00 lbs. GWRC4-P GWRC4 GWRC42-P GWRHB26 22,000 lbs. GWRC-P GWRC GWRC2-P GWRHB27,000 lbs. Pipe Chain Wrench Forged handle is fully heat-treated. Ideal for use in close quarters and where space is at a premium. Successive bites can be taken without removal of wrench from the work piece. Fully adjustable to fit any shape pipe. Heat Treated Pipe Diameter Minimum - Maximum (Pipe ) JHWCW-4 Handle Length Chain Length JHWCW-4-4 Pipe Chain Wrench Forged strong I Beam handle. Designed for working in confined areas when regular pipe wrenches will not fit, excellent for pipe fittings. Portable and lightweight can be used for overhead and underground work. Heat Treated PIPE TONGS AND WRENCHES GWRC2-P GWRC JHW4022 GWRC-P Pipe Diameter Handle Length Capacity Chain Length JHW JHW4022 JHW N2

36 HAMMERS JHWSH-8A JHWSHF-0LA JHWSHF-4A Sledge Hammers High carbon steel, heat treated and tempered head, with hickory handle Wood Handle Weight (lbs.) Handle Length Overall length Face Diameter JHWSH-2A 2 JHWSH-4A 4 2 JHWSH-6A JHWSH-8A » JHWSH-0A JHWSH-2A JHWSH-6A Replacement Handle Service Kit Description Weight (ozs.) Length JHWSHHW-4A Handle 4 JHWSHHW-2A Handle 24 6 Fiberglass Handle Double faced head is hardened and tempered forged for maximum strength and durability. All kits include replacement handle, pre-measured bonding mix, mix container and instructions Weight Class (lbs) Handle Length Overall length Face Diameter JHWSHF-4SA ** JHWSHF-8SA ** JHWSHF-2SA ** JHWSHF-2A JHWSHF-A 4 4 JHWSHF-4A JHWSHF-6A JHWSHF-8A JHWSHF-0A JHWSHF-0LA JHWHSB-0A JHWHSB-0LA JHWSHF-2A JHWSHF-6A JHWSHF-6LA JHWSHF-20A ** Soft steel safety head is similar in hardness to brass ** Brass Head where non-sparking is not required Replacement Handle Service Kit Description Weight (lbs) Length JHWSHHF-4A Fiberglass 2 to 4 4 JHWSHHF-6A Fiberglass 6 to 8 6 JHWSHHF-2A Fiberglass 6 to 6 2 JHWSHHF-6 Fiberglass 20 6 N22 snapon.com/industrial

37 Dead Blow Sledge Hammers With Replacement Tips Shot loaded dead blow heads deliver the impact of a steel hammer with little or no rebound Oversized head and striking face minimizes miss hits, applying force with greater impact and repeatability Strong yet light weight handles provide 0% of the total hammer weight at the head 4" Non-marring removable tips can be replaced when worn Handle Length Overall length Face Diameter Weight (lbs) JHWSHSFDB Includes Two 4" Black Tips 4" Replacement Tip Hardness Color Hardness Color JHWSHSFDB-40S Soft Brown JHWSHSFDB-40N Med/Hard Cream JHWSHSFDB-40M Medium Red JHWSHSFDB-40H Hard Black JHWSHSFDB-40T Tough Green JHWSHSFDB-40XH Extra hard Yellow Wilton Bash Cross Pein Hammers With Unbreakable Handle Technology Description WMH026 WMH06 2 Lb Head, Cross Pein Hammer, 6" BASH Handle Lb Head, Cross Pein Hammer, 6" BASH Handle Wilton Bash Ball Pein Hammers With Unbreakable Handle Technology UNBREAKABLE TECHNOLOGY steel core eliminates breaking during overstrikes HIGH VIS HEAD - Soft Face Hammer's 0 HRC head mushrooms while striking harder materials, promoting safety on the jobsite SAFETY PLATE - locks head firmly to handle to prevent head dislodging ANTI-VIBE NECK - thick, tapered neck absorbs vibration reducing worker fatigue NO-SLIP GRIP - vulcanized rubber handle for secure girp while striking LANYARD HOLE - safely secure hammer to wrist or stationary object APPLICATIONS: Construction and Maintenenance where safety is a consideration WMH244 WMH24 WMH404 Description 24 Oz Head, Ball Pein Hammer, 4" BASH Handle 2 Oz Head, Ball Pein Hammer, 4" BASH Handle 40 Oz Head, Ball Pein Hammer, 4" BASH Handle JHWSHSFDB-8 JHWSHSFDB-40H JHWSHSFDB-40M JHWSHSFDB-40N JHWSHSFDB-40S JHWSHSFDB-40T WMH026 WMH244 HAMMERS JHWSHSFDB-40XH N2