Operating weight PLEASE CONTACT. ᵀPhoto may include optional equipment. Courtesy of Machine.Market

Transcription

1 Mitsubishi S4S-DT ngine 57 kw / 77 P Operating weight yd. adjustable boom with blade with blade ucket capacity, S 9600 (21160 ) 950 (20610 ) 0.1~0.5 m (0.17~0.46 yd) Reach on ground level 7190 mm (2 7 ) Digging depth 620 mm (11 11 ) Travel speed (forward / reverse) 28 km / hr (17.4 mph) PS ONTT ᵀPhoto may include optional equipment rev

2 omfortable Operators Station The operator can choose the most comfortable operating position by adjusting the seat and both control towers. luster ( nstrument Panel ) ydraulic Power Steering ydraulic power assisted steering system provide comfortable operation Simple ontrol ir onditioning Reliable monitor with tilt angle adjustable cluster You find this handy control cluster at your fingertips. rom here, you can check your speed and fuel level, and activate your pre-heater, heater, two-speed travel system, and working lights. Pre-heating system When you place the starting switch to on position and press the pre-heat button, four D lamps get turned on one after another within 15 minutes and flicker together two times. ven if these D lamps stay on, this pre-heating ceases to function once your excavator has already got started. entralized switch board entralized switch board Various function switches are centralized for the operator s comfort Safety ocking System The left hand joystick console lifts up and into a locked position to widen your entrance into the cab. The joystick controls will remain safely inoperable until the console is lowered and snapped back into place. t is possible to adjust the air direction and air flow to best suit your needs. onger oystick ever ong lever grip applied to joystick gives an operator smooth and comfortable feel. The longer grip of the joystick lever is provided for precise control 2

3 Power, Speed, and ffortless ontrol ccessibility & Serviceability Powered by Mitsubishi emmissionized engine, the R95W- features the highest horse power and digging force in its model class. ngine The four cylinders turbo-charged, engine is built for power, reliability,economy, and low emissions. ompact ngine Size The compact size of the engine makes it easier to service than other engines. The low engine height allows easy access for maintenance due to a side-mounted, gear-driven camshaft. Reliability You an Depend On The engine is built from a cast iron, skirted block with main bearing support between each cylinder. This combination provides maximum strength, rigidity, and crankshaft support. Special liquid cooling results in uniform temperature distribution. More Powerful Digging orce The digging force of the yundai R95W- is the greatest in its class. That means more power per penny, giving you the best value. asy Serviceability olding System Powerful Dozer lade rake System oom olding System The Pilot check valve in the main control valve prevents the boom dropping over extended period in neutral position. holding valve The pilot check valve in the main control valve prevents the arm dropping over extended period in neutral position. The R95W- was built with accessibility in mind. ll doors, covers and hoods were built with complete open access. You ll find that the R95W- offers plenty of space to complete your regular maintenance service hassle - free. standard equipped heavy-duty rear dozer blade provides great stability in any digging application. the blade, thanks to its heavy structure, offers powerful dozing to finish up back filling job. ighly reliable brake system. Disc (wet type) assure positive braking performance even in muddy conditions. 2 independent lines for safety Pre-leaner Direct injection is featured in the engine for fuel economy. or longer element service intervals, you find a forced lubrication with a full-flow filter, and a double dry type air cleaner. dust indicator and automatic dust evacuator have been added to simplify maintenance. This pre-cleaner makes the life of air cleaner elements and engine longer. ull Open Type Doors ull open doors and simple key system provide easy service 4 5

4 ngine Model Type uckets Swing system Mitsubishi S4S-DT Water cooled, 4 cycle Diesel, 4-cylinders in line, direct injection, Turbocharged, ow emission Rated flywheel horsepower S 149 (gross) 77 (57 ) / 2200 P (kw)/ rpm (net) 7 (54 ) / (57 ) / 2200 DN 6271 (gross) PS (kw)/ rpm (net) 74 (54 ) / (195 ) / 1500.m(.ft)/rpm Max. torque ore 94 (.70 ) mm ( in ) Stroke 120 (4.72 ) Piston displacement 1 (20 ) cc ( in )... atteries 2 ᴧ 12 V ᴧ 100 Starting motor V -.2 kw lternator V - 50 mp ydraulic system Main pump Type...Two variable displacement piston pumps Rated flow... 2ᴧ90.2ὀ/min (2.8 USgpm/19.8 Upm) Sub-pump for pilot circuit...ear pump Sub-pump for steering ὀ/min (9.4 USgpm/7.8 Upm) ydraulic motors Travel...Variable displacement axial piston motor with brake valve Swing... xial piston motor with automatic brake /cm (psi) Relief valve setting mplement circuits (980 ) Travel (980 ) Swing circuit (2700 ) Pilot circuit...5 (500 ) Service valve...nstalled ydraulic cylinders No. of cylinder-bore ᴧ rod ᴧ stroke mm (in) oom : ᴧ 85 ᴧ 725 (4.9" ᴧ." ᴧ 28.5") : ᴧ 65 ᴧ 845 (.9" ᴧ 2.6" ᴧ.2") ucket : 1-90 ᴧ 60 ᴧ 700 (.5" ᴧ 2.4" ᴧ 27.6") oom swivel : ᴧ 65 ᴧ 640 (.9" ᴧ 2.6" ᴧ 25.2") lade : ᴧ 65 ᴧ 180 (.9" ᴧ 2.6" ᴧ 7.1") Outrigger : ᴧ 65 ᴧ 180 (.9" ᴧ 2.6" ᴧ 7.1") oom adjust : 2-90 ᴧ 60 ᴧ 565 (.5" ᴧ 2.4" ᴧ 22.2") Swing motor... xial piston motor Swing reduction... Planetary gear reduction Swing circuit lubrication... rease-bathed Swing brake... Multi Wet disc Swing speed rpm 0.1 (0.17) S heaped m (yd) Steering system ydraulically actuated, orbitrol type steering system actuates on front wheels through the steering cylinders. Min. turning radius mm(ft.in) (19 ) 0.16 (0.21) apacity 0.22 (0.29) Recommendation mm (in) oolant & ubricant capacity liter Usgal Ual ontrols Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. S heaped heaped 0.1 (0.17) 0.16 (0.21) 0.22 (0.29) 0.12 (0.16) 0.15 (0.20) 0.20 (0.26) 0.24 (0.1) 450 (17.7) 500 (19.7) 600 (2.6) 680 (26.8) 550 (21.7) 600 (2.6) 700 (27.6) 780 (0.7) 0.27 (0.5) 0.2 (0.42) 750 (29.5) 840 (.1) 850 (.5) 940 (7.0) 0.26 (0.4) ᵀ0.0 (0.9) 0.5 (0.46) 0.5 (0.46) (0.9) Width m (yd ) (refilling) uel tank... ngine coolant... ngine oil... Swing device... xle (ront)... (Rear)... ydraulic system... ydraulic tank... ᵀ (0.4) Without With side cutters side cutters Weight () 170 (70 ) 640 (11'11") hydraulic adjustable oom oom 1600 (5 ' ") (6' 1") mm ( ft. in ) 000 (9'10") Mono oom 1600 (5' ") (6' 1") 215 (470 ) 225 (500 ) 240 (50 ) 180 (400 ) 200 (440 ) 2 Drives & rakes 4-wheel hydrostatic drive. onstant mesh, helical gear transmission provides 2 forward and reverse travel speeds. Max. drawbar pull () (11100) Travel speed 1st (forward/reverse) (5.0) km/hr(mph) 2nd (forward/reverse)...28 (17.4) deg(%)...0ᴋ(58) radability Service brake... ndependent dual brake, front and rear axle full hydraulic power brake. ᴌSpring released and hydraulic applied wet type multiple disc brake. ᴌTransmission in locked at neutral position for parking, automatically. xles & Wheels ull floating front axles is supported by center trunnion for oscillation. t can be locked by oscillation lock cylinders. Rear axle is fixed on the lower chassis. Tires PR, Dual 6 Pilot controls... Two joysticks with one safety lever () : Swing and, (R) : oom and ucket (SO) ngine throttle...mechanical, lever type xternal lights...two lights mounted on the boom one below the cab, one the battery box Undercarriage Z@pplicable for materials with density 2000 /m (70 /yd ) or less Z@pplicable for materials with density 1600 /m (2700 /yd ) or less Z@pplicable for materials with density 1100 /m ( /yd ) or less ᵀ : Standard backhoe bucket Reinforced box - section frame is all-welded, low-stress. Dozer blade and outriggers are available. pin-on design. Dozer blade... very useful addition for leveling and back filling or clean-up work. an be mounted on the front or the rear. Outrigger... ndicated for max. operation stability when digging and lifting. an be mounted on the front or the rear. ooms and arms are of all-welded, low-stress, full-box section design. 640mm (11'11") hydraulic adjustable boom, 000mm (9 10 ) mono boom and 1600mm (5'"), mm (6'1"), arms are available. uckets are all-welded, high-strength steel implements. ᵀ1600mm (5'") mm (6'1") Operating weight (approximate) Operating weight, including 1600mm (5'")arm, S heaped 0.0 m (0.9 yd) backhoe bucket, lubricant, coolant, and full fuel tank, hydraulic tank and the standard equipment. Operating weight Undercarriage 950 (20610 ) Rear - 2 outrigger 9450 (2080 ) 9200 (20280 ) (22270 ) 9850 (21710 ) 9950 (21940 ) 9700 (2180 ) ront-blade +Rear-outrigger (22220 ) 980 (21670 ) ront-blade +Rear-blade (22600 ) (22050 ) *Standard equipment Major component weight Upperstructure ounterweight Mono oom (with arm cylinder) yd djustable oom (with arm cyl.) ength mm (ft.in) Weight () S Mono oom 9600 (21160 ) our outrigger () yd.djustable oom *Rear - dozer blade ront-outrigger+rear-blade Digging force ucket digging force SO S crawd force SO (7940 ) (2910) ( 950 ) (1500 ) ᵀ1600 (5'") (6'1") 60 (790 ) 80 (840 ) Remark ᵀStandard arm Note: weight includes bucket cylinder and linkage 7

5 Dimensions Working ranges mm(ft.in) P R D,D' Q O N Wheel base 2400 ( 7 10 ) Tread 1810 ( 5 11 ) round cleance of counterweight 1140 ( 9 ) D Tail swing radius D Rear-end length Overall width of upperstructure Overall height of cab Min. ground clearance Overall width round cleance of blade up mm(ft.in) length 2250 (7 5 ) 020 (9 11 ) 6515 (21 5 ) 0 (1 1 ) Max.digging reach on ground 6210 (20 5 ) Depth of blade down 20 (0 9 ) round clearance of front blade up 0 (1 1 ) Depth of front blade down 20 (0 9 ) 245 (7 8 ) 1600 (5 ) N Shipping length 6900 (22 8 ) O Shipping height 2745 (9 0 ) P Traveling length 5700 (18 8 ) Q Traveling height 990 (1 1 ) R ength of roading position 4020 (1 2 ) 1600 (5 ) Max.digging reach 50 (1 2 ) length 000mm( 9' 10") oom length ydraulic adjustable boom Max.digging depth close 280 (10 9 ) Max.digging depth (8 level) 2870 (9 5 ) Max. vertical wall digging depth 200 (6 8 ) D Max. digging height 6200 (20 4 ) Max. dumping height 40 (14 ) Min. swing radius 100 (10 2 ) ydraulic adjustable boom P R D,D' Q O N Wheel base 2400 ( 7 10 ) Tread 1810 ( 5 11 ) round cleance of counterweight 1140 ( 9 ) D Tail swing radius D Rear-end length Overall width of upperstructure Overall height of cab Min. ground clearance 020 (9 11 ) 50 (1 2 ) Overall width round cleance of blade up 0 (1 1 ) Depth of blade down 20 (0 9 ) round clearance of front blade up 0 (1 1 ) Depth of front blade down 20 (0 9 ) 245 (7 8 ) ᵀ 1600 (5 ) (6 1 ) 7100 (2 4 ) 7210 (2 8 ) 2680 (8 10 ) * Standard quipment 2840 (9 4 ) 5490 (18 0 ) 5490 (18 0 ) 940 (12 11 ) 940 (12 11 ) 00 (10 10 ) 00 (10 10 ) 640 (11 11 ) ydraulic adjustable boom ᵀ1600 ( 5' ") ( 6' 1") Max.digging reach 7440 ( 24' 5") 7670 ( 25' 2") Max.digging reach on ground Max.digging depth close Max.digging depth (8 level) Max. vertical wall digging depth D Max. digging height 7190 ( 2' 7") 7420 ( 24' 4") 620 ( 11' 11") 870 ( 12' 8") 450 ( 11' 4") 700 ( 12' 2") 2920 ( 9' 7") 170 ( 10' 5") 7920 ( 26' 0") 8150 ( 26' 9") length 2250 (7 5 ) length N Shipping length O Shipping height P Traveling length Q Traveling height R ength of roading position oom length Max. dumping height 5910 ( 19' 5") 6140 ( 20' 2") Min. swing radius 2520 ( 8' ") 2720 ( 8' 11") ᵀ Standard quipment ᵀ Standard quipment 8 9

6 ifting capacities With rear dozerblade down and 1,900(4,190 ) counterweight.0 m( 9 10 ) oad point height Rating over-front 1.60 m( 5 ) oad radius 4.5m (15.0ft).0m (10.0ft) Rating over-side or 60 degree 0.0 m S heaped t max. reach apacity 6.0m (20.0ft) Reach 4.5m (15.0ft) *1650 *640 *1650 *640 *1570 * (18.).0m (10.0ft) *1940 *4280 *1940 *4280 *1710 * (20.) 1.5m (5.0ft) round ine -1.5m (-5.0ft) *4850 * *2580 * *1870 * (20.5) *2950 * *2020 * (18.8) *570 *7870 *570 *7870 *5520 * *6770 *1490 *6770 *1490 *4660 * ydraulic adjustable boom With rear dozerblade down and 120 counterweight.64m ( ) oad point height.0m (10.0ft) Standard quipment Rating over-front 1.60 m( 5 ) oad radius 4.5m (15.0ft) Rating over-side or 60 degree 0.0m S heaped t max. reach apacity 6.0m (20.0ft) Reach 6.0m (20.0ft) 4.5m (15.0ft) *2010 * m (10.0ft) *260 * *1780 * m (5.0ft) *270 * round ine *2660 * m (-5.0ft) *1950 * *2990 *6590 *2990 *6590 *1810 * (17.5) *1590 * (21.) *1490 * (2.0) *180 * *180 * (2.1) *1650 * *1190 * (21.8) *710 *1570 *710 * (18.4) Notes : 1. ifting capacity are based on S 1097, SO ifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.. The load point is a hook (standard equipment) located on the back of the bucket. 4. * indicates the load limited by hydraulic capacity. SO standard size cab ll-weather steel cab with all-around visibility Safety glass windows Wide windshield wiper Sliding fold-in front window Sliding side window ockable door 2-power, mode selection system (high, econo mode) uto deceleration system nti restarting up system ully adjustable suspension seat with seat belt oom holding system holding system Safety lock valve for adjust boom cylinder Starting aid (air grid eater), cold weather entralized monitoring D type tachometer ngine coolant temperature gauge ngine oil pressure light ir-cleaner clogging indicater harging light ngine overheat light uel meter and light Mechanical type hourmeter llumination lights Travel alarm atteries (2 ᴧ 12V ᴧ 100) lectric horn eater (2,700kcal/hr / 10,700TU/hr) eater defroster Door and cab locks, one key Two outside rearview mirrors Slidable joystick, pilot-operated uxiliary accumulator utomatic swing brake Removable reservoir tank Water separator, fuel line ounterweight (150 / 2910 ) yd adjustable boom (.64m / ) (1.60 m / 5' ") lade (450ᴧ245mm/1' 6" x 7' 8") Tires-dual (8.25ᴧ20-12PR) M/M radio and cassette ong arm (1.85m, 6 1 ) Various optional uckets (S heaped) Narrow bucket (0.1 m, 0.17yd) Narrow bucket (0.16m, 0.21yd) Narrow bucket (0.22m, 0.29yd) Narrow bucket (0.26m, 0.4yd) ight duty bucket (0.5m, 0.46yd) Outrigger, pin-on, individually controlled Rear-outrigger ront-outrigger and rear-dozer blade our outrigger ront-dozer blade and rear-outrigger ront-dozer blade and rear- dozer blade ender Tool kit Operator suit Optional quipment ir-conditioner (2850 kcal /hr, 11,00 TU /hr) uel filler pump (5ὀ/ min, 9.2 USgpm) eacon amp Safety lock valve for boom cylinder Safety lock valve for arm cylinder Single acting breaker piping kit Double acting piping kit attery master switch (.0 m, 9 10 ) Powered by TPD (