TIRE PRESSURE MONITORING SYSTEM TPMS 1.0

Size: px

Start display at page:

Download "TIRE PRESSURE MONITORING SYSTEM TPMS 1.0"

Henry Shelton
5 years ago
Views:

1 TIRE PRESSURE MONITORING SYSTEM TPMS 1.0 Operating & Installation Instructions

2 SPECIFICATION Sensor Operating frequency Battery voltage Battery lifetime Operating temperature Pressure range Display Operating frequency Operating voltage Operating temperature Default value High pressure value Low pressure value High temperature value MHz 1.8V ~ 3.3V 1-year -20 C ~ 60 C 0~3.5 Bar / 0~50 PSI MHz 12 +/- 3V -20 C ~ 70 C 3.0 Bar / 43 PSI 1.8 Bar / 26 PSI 68 C ~ 80 C Precision Temperature Pressure Air pressure unit +/-2 C 0.1 Bar / 1.5 PSI 1 Bar = 14.5 PSI = 100 Kpa = 1.02Kgf/cm2 Accessories 4x external sensor 5x anti-theft nuts 1x spanner (Keep in car) 1x sensor tool 1x battery 4x rubber seal 1

3 DISPLAY Set Button Cigarette Plug Data Display Pressure Unit Warning Display SENSOR Sensor Cover Battery Sensor Rubber Seal Washer Hex Nut 2

4 3

5 4

6 After entering the setting interface, press setting button SETTING HIGH PRESSURE VALUE SETTING LOW PRESSURE VALUE SETTING Press & hold setting button. Press & hold setting button. for high pressure value setting, the first number will flash, then press the right button to adjust the number. After entering the setting interface, press the right button, then press the setting button, the first number will flash, then press the right button to adjust the number. When finish adjusting the number, press setting button to confirm, you will hear the sound Bi- to indicate high pressure value is successfully set. When finish adjusting the number, press setting button to confirm, you will hear the sound Bi- to indicate low pressure value is successfully set. HIGH TEMPERATURE VALUE SETTING UNIT SWITCHING Press & hold setting button. Press & hold setting button. After entering the setting interface, press the right button twice then press the setting button, the first number will flash, then press the right button to adjust the number. After entering the setting interface, press the right button 3 times then press the setting button, the unit of Bar and Psi will switch. Psi When finish adjusting the number, press setting button to confirm, you will hear the sound Bi- to indicate high temperature value is successfully set. You will hear the sound Bi- to indicate that unit switching successful RESET SETTING Press & hold the right button for at least 5 seconds. You will hear the sound Bi-- which indicates that all parameters setting has returned to original factory settings. 5

7 SETTING SENSOR PAIRING (Sensor pairing are required only when the tires or the sensors has switched location or be replaced) Press and simultaneously for at least 5 seconds to enter into pairing mode. Pairing order : Left Front Right Front Left Rear Right Rear. When system receives the signal, you will hear Bi- Bi- Bi- which indicates successful sensor pairing. Left front tire icon begin to flash. Every time display flashes the next location, repeat steps 3-4 to pair the rest of the sensors. Immediately get the sensor to learn the code and wait for 5-8 seconds. After the last tire (right rear) is paired with the sensor, the display will return to the original interface. Unscrew the sensor TROUBLESHOOTING 1. Air leakage after sensor installation The tire valves may not be universal standard, please check with the local workshop. 2. No tire data are displayed after completing installation Ensure ACC is turned on. 3. Missing/lost sensor Please purchase new sensor. 4. Sensor battery low Please replace with battery CR Change of tire location Please reprogram the corresponding sensors. Note 1. TPMS (Tire Pressure Monitoring System) is designed for monitoring tire irregularities. Drive has responsibility to maintain tires regularly. 2. Driver should react promptly once warning from this unit alerted. 3. Blaupunkt does not guarantee or assumes liability for the loss of sensors. 4. All sensors in this unit have been pre-set individually for each tire in the factory. 5. Whenever the location of tire changed, the sensor must be reprogrammed. 6. The display will turn off whenever the car is turned off. 6

8 Designed and engineered by Blaupunkt

TIRE PRESSURE MONITORING SYSTEM TPMS 2.0

TIRE PRESSURE MONITORING SYSTEM TPMS 2.0 Operating & Installation Instructions SPECIFICATION Sensor Operating frequency Battery voltage Battery lifetime Operating temperature Pressure range Display Operating