Aura Lunaria Premium EM-BBU

Transcription

1 Aura unaria Premium EM-BBU ow profile EM-BBU grid ED solution. Appointed to be the worlds most energy efficient ED-panel by SEAD ED U / cu and DC 4.0 listed 130 lm/w Energy efficient o UV-radiation Shallow height less than 2" depth (incl. driver) Tru-Edgelit panel Seismic clips 50,000 hours lifetime 5 year warranty 0-10V dimmable Operating temperature -25 to +40 i-mh battery charging temp. Isup to 70 o C 3 hour integrated battery backup Wireless remote control Mounting options include surface kit or cable mount The Aura unaria Premium EM-BBU is a low-profile grid and display ED solution with a seamless connection structure. This ED panel light is a revolutionary ED lighting guide-plate with high brightness EDs. Used as lighting for standard commercial grids; the Aura unaria is typically used to replace standard 1 X4, 2 X2, or 2 X4 fluorescent luminaires. It provides an uniform luminance throughout the panel, making it a tru-edgelit that helps to prevent eye exhaustion. Aura unaria Premium ED panel lights are the best solution to meet your needs in your office, school and other commercial applications. Best of all, it is backed by a 5 year warranty. Ideal for: Offices Schools Hospitals Commercial applications Supermarkets Retail Municipalities Airports

2 ARTICE O. DESPTIO POWER COSUMPTIO (W) DIMESIOS (ft) COOR TEMPERATURE (K) SYSTEM UMIOUS FUX* (lm) SYSTEM EFFICACY (lm/w) Aura unaria Premium EM-BBU 45 1X Aura unaria Premium EM-BBU 45 1X Aura unaria Premium EM-BBU 45 1X Aura unaria Premium EM-BBU 45 1X Aura unaria Premium EM-BBU 45 2X MODES Aura unaria Premium EM-BBU 45 2X Aura unaria Premium EM-BBU 45 2X Aura unaria Premium EM-BBU 45 2X Aura unaria Premium EM-BBU 50 2X Aura unaria Premium EM-BBU 50 2X Aura unaria Premium EM-BBU 50 2X Aura unaria Premium EM-BBU 50 2X Aura unaria Premium EM-BBU 70 2X Aura unaria Premium EM-BBU 70 2X Aura unaria Premium EM-BBU 70 2X Aura unaria Premium EM-BBU 70 2X Illuminance Distance Curves [Unit: lx] [EMax] = [EMax* 90%] = [EMax* 80%] = [EMax* 70%] = [EMax* 60%] = [EMax* 50%] = [EMax* 40%] = [EMax* 30%] = [EMax* 20%] = [EMax* 10%] =

3 Aura unaria Premium EM-BBU 1 X 4 Technical Details and Photometrics 45 W Aura unaria Premium EM-BBU 2 X 2 Technical Details and Photometrics 45 W Aura unaria Premium EM-BBU 2 X 4 Technical Details and Photometrics 50 W Aura unaria Premium EM-BBU 2 X 4 Technical Details and Photometrics 70 W

4 Measurements 1 X 4 Internal driver hanging kits 2 X 2 2 X 4 Internal or emergency location Side View Button#2 (DISCHARGE) Button#1(TEST) Button#3(STOP) 298 mm / 1FT / 1FT 603 mm / 2FT 603 mm / 2FT 1213 mm / 4FT Emergency (Only for emergency) 603 mm / 2FT Mode of Connection Remote-control Receiver (Only for emergency) Product Figure 1213 mm / 4FT 45 mm / 1.77in 11 mm / 0.43in Mode of Mode Connection of Connection hanging kits hanging kits on-dimmable wiring diagram Internal driver Internal driver Emergency Emergency Remote-control Remote-control Receiver Receiver (Only for emergency) (Only for emergency) (Only for emergency) (Only for emergency) Product Figure Product Figure The green and The yellow green wire: and ground yellow wire: ground wire Diagram of remote control(emergency) Internal or emergency Internal or emergency location location Button#1(TEST) Button#1(TEST) Internal driver Internal or emergency Button#2 Button#2 location hanging kits (DISCHARGE) (DISCHARGE) Button#3(STOP) Button#3(STOP) Button#2 (DISCHARGE) Emergency Remote-control Diagram of Diagram remote Receiver control(emergency) of remote control(emergency) (Only for emergency) (Only for emergency) Product Figure Mode of Connection To umber 2,3,4...n Drivers bule Wiring Figure(2) Green 0-10V dimmable diagram The green and The yellow green wire: and ground yellow wire: ground wire Green Green The green and yellow To umber 2,3,4...n D D Mode of Connection for unaria Battery on-dimmable Backup on-dimmable wiring Panel diagram wiring only diagram bule bule 0-10V dimmable 0-10V dimmable diagram diagram Wiring Figure(2) Wiring Figure(2) 0-10V di Wir The green and yello To umber 2,3,4...n DIM- red DIM- DIMred To umber 2,3,4...n To umber Drivers 2,3,4...n Drivers The green and yellow on-dimmable wire: ground wire wiring diagram Product Application Instructions Red 1 Mode of Mode Connection of Connection for unaria for unaria Battery Battery Backup Backup Panel only Panel only -This lamp uses a microwave motion sensor, with detected radius of 5 meters to 10 meters. -The lamp with a sensor can achieve a 3 step dimming function: 100%- - -> low light (10-20%)---->off custom settings. Mode (Figure of Connection 1) for The green unaria and The yellow green wire: Battery and ground yellow wire: Backup ground wire Panel only Green -Please perform an emergency test every month for the lamp with the emergency backup. Operation: Press the TEST button on the wireless controller. If the lamp can Red 1 Red 1 switch to the battery powered, then the emergency backup is working. The green and The yellow green wire: and ground yellow wire: ground wire -This emergency product is designed to have a trimonthly charge and discharge cycle, to ensure its battery lifetime. Users can close/start this function by remote Green Green Red control. For further details please read the remote control function instructions. (Factory 1 settings: automatic discharge fuction is ''start'' status. - The emergency battery sets itself into a dormant setting to avoid discharge and leakage during shipping. -The nickel-metal hydride batteries can be repeated 500 charge-discharge cycles if operated properly. If the Red emergency 1 Red To umber function 1 2,3,4...n is used Driversonce per week it can extend the lifetime to 8-10 years. -The battery charge cycle is 24 hrs with dual protection of voltage detection and charging time detection. The battery could be prevented DIM- effectively To umber 2,3,4...n To overcharge umber Drivers Red 2,3,4...n 1Drivers and overdischarge. Once any of the protections is triggered, circuit will automatically switch to an intermittent charge. The utilization of wireless IR controller Button # 1 TEST. Press the button to switch to emergency lighting mode. The light of the emergency indicator will flash red. red bule red red Button # 2 DISCHARGE. Press the button to start the battery discharge process. The light of the emergency indicator will turn red until electrical discharge bule process bule is Emergency wiring diagram 0-10V dimmable Emergency diagram over. The lamps will switch to normal working state after 5 seconds Emergency Emergency wiring diagram wiring diagram 0-10V dimmable 0-10V dimmable Emergency Emergency diagram diagram Wiring Figure(2) Wiring Figure(2) Wiring Figure(2) Button # 3 STOP. 1. Stop discharge (pause discharge when in emergency status). 2. Cancel automatic discharge (keep pressing the button for 3 seconds). When the red indicator lamp flickers once, you have stopped the automatic discharge function every 3 rd month. 3. Start automatic discharge Emergency (keep pressing wiring the button diagramfor V dimmab seconds, when red indicator lamp continues flicker you have set the automatic discharge function to every 3 rd month. W DIMred DIM-

5 AURA UARIA PREMIUM PAE EM-BBU Installation Instructions Installation Instructions Installation Manuals On the back On the back Embedded Installation On the back Embedded Installation Ceiling Embedded Installation Ceiling Drill a Hole With 6mm Diameter Drill Bit Inflatable Drill a Hole hole With with 6mm a 6 mm Colloidal Diameter Particle diameter drill Drill Bit bit Rotary Fixing Adjust The ength OfSuspension Wire Rotary Fixing suspension wire Adjust The ength OfSuspension Wire Suspension Wire Fixer Inflatable Colloidal Particle Inflatable Colloidal Particle Suspension Wire Fixer Suspension Wire Fixer Fix the suspension wire fixer on the Fix the suspension wire on the suspension wire ED Driver Box ED Driver Box ED Panel ight ED Panel ight Connect ED panel light by the hook of suspension wire Fix the suspension wire fixer on the Fix the suspension wire wire fixer fixer on on the the 1 Fix the suspension wire on the Suspending Installation Suspending Installation Connect ED panel light by the hook of suspension wire screw Drill a Hole With 6mm Diameter Drill Bit frame U frame 1 Assemble the frame well frame U frame 1 Assemble the frame well screw Drill a Hole With 6mm Diameter Drill Bit Inflatable Colloidal Particle Ceiling Frame Inflatable 2 Fix the frame on Colloidal Particle Ceiling Frame 2 Fix the frame on ed Panel ight 3 Take out one bracket from the frame 3 Take out one bracket from the frame ed Panel ight 4 Insert ED panel to the frame 5 Fix bracket to the frame 6 Installation is complete Please ensure make sure that the the frame is is assembled well well before before fixed fixed on on Surface Mount Installation 4 Insert ED panel to the frame 5 Fix bracket to the frame 6 Installation is complete Please make sure the frame is assembled well before fixed on Surface Mount Installation

6 AU R A U A R I A PREMIUM EM-BBU