TIE-DOWNS PERFORMANCE WINCHES & ACCESSORIES

Transcription

1 TIE-DOWNS PERFORMANCE WINCHES & ACCESSORIES

2 TABLE OF CONTENTS WINCH SERIES KX Extreme Series... 3 KW Workhorse Series... 4 KV Venture Series... 5 KU Utility Series... 6 KT Tracker Series... 7 AC Series... 8 Winch Accessories... 9 WINCH DUTY CYCLE ALL WINCHES HAVE A DUTY CYCLE. DUTY CYCLE IS DETERMINED BY, THE WEIGHT OF THE LOAD, IF IT IS A ROLLING LOAD (ON WHEELS OR SOME TYPE OF ROLLERS) OR A DEAD PULL LOAD (LYING ON THE GROUND OR SURFACE THAT CAN INTERFERE WITH THE PULL OF THE LOAD), AND IF IT IS PULLING ON A FLAT SURFACE OR UP AN INCLINE, ALONG WITH ENVIRONMENTAL CONDITIONS. ALL THESE FACTORS WILL DETERMINE HOW LONG YOU CAN CONTINUALLY USE THE WINCH UNTIL YOU MUST STOP TO LET THE MOTOR COOL DOWN, DUTY CYCLE. THE EASIEST AND OUR RECOMMENDED WAY TO DETERMINE WHEN THE MOTOR NEEDS TO COOL DOWN IS TO STOP THE WINCH, CAREFULLY PLACE YOUR HAND ON THE MOTOR AFTER 3 TO 4 MINUTES OF CONTINUES USE, IF IT SO HOT YOU CANNOT LEAVE YOUR HAND ON THE MOTOR FOR A COUNT OF 10, THEN IT NEEDS TO COOL DOWN TO THE OUTSIDE TEMPERATURE BEFORE STARTING TO PULL AGAIN. CONTINUE TO CHECK MOTOR ALL THROUGHOUT THE TIME YOU ARE USING IT, UNTIL IT GETS TOO HOT, THEN STOP AND ALLOW THE UNIT TO COOL DOWN AGAIN. 2

3 KX9500 *Mounting Plate NOT Included KX95122B AMP Draw at Full Load 360 Rated Line Pull 9,500 lbs/ 4309 KG 23 FPM (No Load) 12 Volt DC / 5.5 hp Full KX9500E *Mounting Plate NOT Included KX95122 AMP Draw at Full Load 329 Rated Line Pull 9,500 lbs/ 4309 KG 23 FPM (No Load) 12 Volt DC / 5.5 hp 12VDC 9,500 lb Winch 12v DC Electric / 5.5 HP Lift & Turn Free Spool Clutch And Full Load Holding Brake 100 of 21/64 With Extreme Clevis Hook And All-Weather Textured Roller Fairlead Wireless Remote With 2 Fobs And Handheld Remote With LED Work Light And 15 Power Lead Wire 100 of 21/64th Wire With HD Clevis Hook 12VDC 9,500 lb Winch 12v DC Electric / 5.5 HP Lift & Turn Free Spool Clutch And Full Load Holding Brake 100 of 21/64 With Extreme Clevis Hook And All Weather Textured Roller Fairlead Wireless Remote With 2 Fobs And Handheld Remote with LED Work Light and 15 Power Lead Integrated LED Work Light Built Into The Top Cover Gear Ratio 216:1 Wire 100 of 21/64th Wire With HD Clevis Hook KX9500S *Mounting Plate NOT Included KX95172B AMP Draw at Full Load 360 Rated Line Pull 9,500 lbs/ 4309 KG 23 FPM (No Load) 12 Volt DC / 5.5 hp KX9500ES *Mounting Plate NOT Included KX95132 AMP Draw at Full Load 329 Rated Line Pull 9,500 lbs/ 4309 KG 23 FPM (No Load) 12 Volt DC / 5.5 hp 12VDC 9,500 lb Winch 12v DC Electric / 5.5 HP Lift & Turn Free Spool Clutch And Full Load Holding Brake 85 of 3/8 With Extreme Clevis Hook And All Weather Textured Hawse Fairlead Wireless Remote With 2 Fobs And Handheld Remote with LED Work Light And 15 Power Lead Wire 85 of 3/8 With HD Clevis Hook 12VDC 9,500 lb Winch 12v DC Electric / 5.5 HP Lift & Turn Free Spool Clutch And Full Load Holding Brake 85 of 3/8 With Extreme Clevis Hook And All Weather Textured Hawse Fairlead Wireless Remote With 2 Fobs And Handheld Remote With LED Work Light and 15 Power Lead Integrated LED Work Light Built Into The Top Cover Gear Ratio 216:1 Wire 85 of 3/8 With HD Clevis Hook KX9500EH *Mounting Plate NOT Included KX95122H AMP Draw at Full Load 430 Rated Line Pull 9,500 lbs/ 4309 KG 39 FPM (No Load) 12 Volt DC / 5.5 hp Full Metal Gear Train 12VDC 9,500 lb Winch 12v DC Electric / 6.7 HP Lift & Turn Free Spool Clutch And Full Load Holding Brake 100 of 21/64 With Extreme Clevis Hook And All Weather Textured Roller Fairlead Wireless Remote With 2 Fobs And Handheld Remote With LED Work Light and 15 Power Lead Integrated LED Work Light Built Into The Top Cover Gear Ratio 150:1 Wire 100 of 21/64th Wire with HD Clevis Hook * High-Speed Retrieve 3

4 KX9500 KW7.5 KW75122RM AMP Draw at Full Load 356 Rated Line Pull 7,500 lbs/ 3402Kg 8 FPM (No Load) 12 Volt DC 4.5 hp Full KX9500 KW VDC 7,500 lb Winch With High Density LED Work Light And Wireless Remote Control 4.5 HP Series Wound 12V DC Fits 2 Class III Receiver Hitch Wire - 72 x 5/16 With Thimble Lift And Turn Free Wheel Clutch Handle Gear Ratio 180:1 Wire 72 x 5/16 and Hook with 12VDC 13,500 lb Winch With High Density LED Work Light And Wireless Remote Control 5.5 HP Series Wound 12V DC Wire - 92 x 3/8 With Thimble And Clevis Hook With Latch Lift And Turn Free Wheel Clutch Handle KX9500 KW9.5 KW95122 AMP Draw at Full Load 360 Rated Line Pull 9,500 lbs/ 4309Kg 30 FPM (No Load) 12 Volt DC 5.5 hp Full KX9500 KW VDC 9,500 lb Winch With High Density LED Work Light And Wireless Remote Control 5.5 HP Series Wound 12V DC Wire x 21/64 With Thimble Lift And Turn Free Wheel Clutch Handle Wire 100 x 21/64 and Hook with 12VDC 17,500 lb Winch With High Density LED Work Light And Wireless Remote Control 6.0 HP Series Wound 12V DC Wire - 92 x 15/32 With Thimble Lift And Turn Free Wheel Clutch Handle KW13122 AMP Draw at Full Load 400 Rated Line Pull 13,500 lbs/ 6124Kg 12 FPM (No Load) 12 Volt DC 5.5 hp Full Gear Ratio 265:1 Wire 92 x 3/8 and Hook with KW17122 AMP Draw at Full Load 481 Rated Line Pull 17,500 lbs/ 7938Kg 16 FPM (No Load) 12 Volt DC 6.0 hp Full Gear Ratio 432:1 Wire 92 x 15/32 and Hook with 4 These products are not to be used for the transportation of people.

5 KX9500 KV8.5 KV85022 AMP Draw at Full Load 292 Rated Line Pull 8,500 lbs/ 3856Kg 24 FPM (No Load) 12 Volt DC 5.5 hp KX9500 KV VDC 8,500 lb Winch With High Density LED Work Light 5.5 HP Series Wound 12V DC Wire - 85 x 5/16 With Thimble Gear Box Circuit Breaker Protected Wire 85 x 5/16 And Hook With 12VDC 10,500 lb Winch With High Density LED Work Light 5.5 HP Series Wound 12V DC Wire - 85 x 3/8 with Thimble And Clevis Hook With Latch KX9500 KV8.5S *Mounting Plate NOT Included KV85072 AMP Draw at Full Load 292 Rated Line Pull 8,500 lbs/ 3856Kg 24 FPM (No Load) 12 Volt DC 5.5 hp KX9500 KV10.5S 12VDC 8,500 lb Winch With High Density LED Work Light 5.5 HP Series Wound 12V DC - 85 x 3/8 with Thimble and Clevis Hook with Latch Gear Box Circuit Breaker Protected 85 x 3/8 And Hook With 12VDC 10,500 lb Winch With High Density LED Work Light 5.5 HP Series Wound 12V DC - 85 x 3/8 With Thimble KV10022 AMP Draw at Full Load 350 Rated Line Pull 10,500 lbs/ 4763Kg 21 FPM (No Load) 12 Volt DC 5.5 hp Full Wire 85 x 3/8 And Hook With *Mounting Plate NOT Included KV10072 AMP Draw at Full Load 350 Rated Line Pull 10,500 lbs/ 4763Kg 21 FPM (No Load) 12 Volt DC 5.5 hp Full 85 x 3/8 Synthetic And Hook With 5

6 KX9500 KU3.5 KU35032 AMP Draw at Full Load 153 Rated Line Pull 3,500 lbs/ 1588Kg 22 FPM (No Load) 12 Volt DC 1.2 hp 12VDC 3,500 lb Winch Handheld Switch - 15 Lead With High Density LED Work Light 1.2 HP 12V DC Wire - 60 x 7/32 With Thimble Mounting Plate And Cable Tension Plate Gear Ratio 226:1 Wire 60 x 7/32 and Hook with KX9500 KU3.5S KU35082 AMP Draw at Full Load 153 Rated Line Pull 3,500 lbs/ 1588Kg 22 FPM (No Load) 12 Volt DC 1.2 hp 12VDC 3,500 lb Winch Handheld Switch - 15 Lead with High Density LED Work Light 1.2 HP 12V DC - 60 x 1/4 with Thimble and Clevis Hook with Latch Mounting Plate and Cable Tension Plate Gear Ratio 226:1 Wire 60 x 1/4 and Hook with KX9500 KU4.5 12VDC 4,500 lb Winch KX9500 KU4.5S 12VDC 4,500 lb Winch Handheld Switch - 15 Lead With High Density LED Work Light 1.5 HP 12V DC Wire - 60 x 7/32 With Thimble Mounting Plate And Cable Tension Plate Handheld Switch - 15 Lead With High Density LED Work Light 1.5 HP 12V DC - 60 x 1/4 with Thimble and Clevis Hook with Latch Mounting Plate and Cable Tension Plate 6 KU45032 AMP Draw at Full Load 210 Rated Line Pull 4,500 lbs/ 2041Kg 14 FPM (No Load) 12 Volt DC 1.5 hp KX9500 KU6.0 KU60032 AMP Draw at Full Load 277 Rated Line Pull 6,000 lbs/ 2722Kg 15 FPM (No Load) 12 Volt DC 1.9 hp Gear Ratio 226:1 Wire 60 x 7/32 And Hook With 12VDC 6,000 lb Winch Handheld Switch - 15 Lead With High Density LED Work Light 1.9 HP 12V DC Wire - 55 x 1/4 With Thimble Mounting Plate And Cable Tension Plate Gear Ratio 226:1 Wire 55 x 1/4 And Hook With KU45082 AMP Draw at Full Load 210 Rated Line Pull 4,500 lbs/ 2041Kg 14 FPM (No Load) 12 Volt DC 1.5 hp KX9500 KU6.0S KU60082 AMP Draw at Full Load 277 Rated Line Pull 6,000 lbs/ 2722Kg 15 FPM (No Load) 12 Volt DC 1.9 hp Gear Ratio 226:1 Wire 60 x 1/4 and Hook with 12VDC 6,000 lb Winch Handheld Switch - 15 Lead With High Density LED Work Light 1.9 HP 12V DC - 60 x 1/4 With Thimble and Clevis Hook With Latch Mounting Plate And Cable Tension Plate Gear Ratio 226:1 Wire 60 x 1/4 And Hook With

7 KX9500 KT VDC 2,000 lb Winch Power In And Out Freespool Clutch Single Stage Planetary Gear Box Dynamic Brake All Hand Held Remote Switch Low AMP Draw Circuit Breaker Protected 12 Volt DC KX9500 KM VDC 2,000 lb Winch Mountable Handheld Remote Switch Power In And Out Freespool Clutch Single Stage Planetary Gear Box Dynamic Brake All Hand Held Remote Switch Low AMP Draw Circuit Breaker Protected 12 Volt DC KT2000 IP-64 AMP Draw at Full Load 110 Rated Line Pull 2,000 lbs/ 907 Kg 24 FPM (No Load) 12Volt DC 1.0 hp Single Stage Planetary Full KX9500 KT3000 KT3000 AMP Draw at Full Load 190 Rated Line Pull 3,000 lbs/ 1361 Kg 30 FPM (No Load) 12Volt DC 1.45 hp 3 Stage Planetary Full Metal Gear Train KX9500 KT4000 KT4000 AMP Draw at Full Load 260 Rated Line Pull 4,000 lbs/ 1814 Kg 20 FPM (No Load) 12Volt DC 1.6 hp 3 Stage Planetary Full Metal Gear Train Gear Ratio 153:1 Free-Spooling Clutch Pull and Turn Dynamic Wire 50 x 5/32 Aircraft Grade 12VDC 3,000 lb Winch Power In And Out Freespool Clutch 3 Stage Planetary Gear Box All Handle Bar Mounted Mini Rocker Switch That Can Be Used As a Handheld Remote Low AMP Draw Roller Fairlead Included Load Doubling Pulley Block Included Flat Bed Mounting Plate Included Gear Ratio 166:1 Free-spooling clutch Cam Activated Mechanic and Dynamic Full Load Holding Wire 50 x 3/16 Aircraft Grade 12VDC 4,000 lb Winch Power In And Out Freespool Clutch 3 Stage Planetary Gear Box Handle Bar Mini Rocker Switch 15 Wired Hand Held Remote With Light Low AMP Draw Roller Fairlead Included Load Doubling Pulley Block Included Flat Bed Mounting Plate Included Gear Ratio 166:1 Free-Spooling Clutch Cam Activated Mechanic and Dynamic Full Load Holding Wire 55 x 7/32 Aircraft Grade KM2000 IP-64 AMP Draw at Full Load 110 Rated Line Pull 2,000 lbs/ 907 Kg 24 FPM (No Load) 12Volt DC 1.0 hp Single Stage Planetary Full KX9500 KT3000S KT3000S AMP Draw at Full Load 190 Rated Line Pull 3,000 lbs/ 1361 Kg 30 FPM (No Load) 12Volt DC 1.45 hp 3 Stage Planetary Full Metal Gear Train KX9500 KT4000S KT4000S AMP Draw at Full Load 260 Rated Line Pull 4,000 lbs/ 1814 Kg 20 FPM (No Load) 12Volt DC 1.6 hp 3 Stage Planetary Full Metal Gear Train Gear Ratio 153:1 Free-Spooling Clutch Pull and Turn Dynamic Wire 50 x 5/32 Aircraft Grade 12VDC 3,000 lb Winch Power In And Out Freespool Clutch 3 Stage Planetary Gear Box All Handle Bar Mounted Mini Rocker Switch That Can Be Used As a Handheld Remote Low AMP Draw Load Doubling Pulley Block Included Flat Bed Mounting Plate Included Gear Ratio 166:1 Free-spooling clutch Cam Activated Mechanic and Dynamic Full Load Holding Wire 55 x 1/4 And Hook With 12VDC 4,000 lb Winch Power In And Out Freespool Clutch 3 Stage Planetary Gear Box Handle Bar Mini Rocker Switch 15 Wired Hand Held Remote With Light and Dynamic Brake Low AMP Draw Load Doubling Pulley Block Included Flat Bed Mounting Plate Included Gear Ratio 166:1 Free-Spooling Clutch Cam Activated Mechanic and Dynamic Full Load Holding Wire 55 x 1/4 And Hook With 7

8 KTSL2000RM 12VDC 2,000 lb Winch KX9500 RM (Rapid Mount) Hitch Ball Mount Handheld Remote Control on 10 lead 20 Power Lead With Battery Clips Screw Knob Freewheel Clutch Powerful Low AMP Draw Gear Box Power In Only Emergency Hand Crank Light And Portable With Built-in Carry Handle KTSL2000RM IP-64 AMP Draw at Full Load AMP Draw At Full Load Rated Line Pull 2,000 lbs/ 907Kg 8 FPM (No Load) 12 Volt DC Spur Gear Gear Ratio 465:1 Wire 30 Wire And Hook With Safety Latch KAC1500 KX /120V AC 1,500 lb Winch 120 Volt AC Power In And Power Out Power Cord Has 3-Prong Plug On 8 Lead Hand Held Remote Switch Pendant On 12 Lead With Resettable Circuit Breaker Emergency Stop Switch Resettable Mounting Plate With 4-Way Roller Fairlead And Cable Tension Plate Quick Change Brush Caps ETL Certified To Meet UL And CSA Standards KAC15042 IP-64 AMP Draw at Full Load 10 Rated Line Pull 1,500 lbs/ 660Kg 4.5 FPM (No Load) 1 120Volt AC Full Load Amps Volt AC Full Metal Gear Train Gear Ratio 262:1 Full Load Wire 42 x 3/16 Galvanized Wire and Hook With 8

9 GENUINE ACCESSORIES Winch Strap/Tree Saver 8,000 lbs Max. Vehicle Weight 2 Webbing Width / 6 Length 20,000 lbs. Webbing Capacity Winch Strap/Tree Saver 10,000 lbs Max. Vehicle Weight 3 Webbing Width / 6 Length 30,000 lbs. Webbing Capacity KTA Wireless Remote Kit For use with KT2500 & KT3000 Range Up To 100 ft Includes 2 Transmitters, Receiver And Wiring Socket KTA Wireless Remote Switch For use with KT4000, KU, KV, KW and KX Range Up To 100 ft Includes 2 Transmitters And Receiver KWA14617 Bow Shackle 9,500 lbs Working Load Limit 3/4 Large Capacity Shackle Ideal Anchor Point For All Your Winch Accessories KWA14618 Bow Shackle with Isolator 9,500 lbs Working Load Limit 3/4 Large Capacity Shackle Ideal Anchor Point For All Your Winch Accessories Isolator Reduces Paint Damage And Travel Noise KTA14127 Quick Connect For Winch Capacities Of 6,000 lbs Or Less For 6 AWG Wire For DIY Wiring Harness KTA14560 Wiring Quick Connects For Winch Capacities Of 7,500 lbs Or Greater Fits 2-4 AWG Wire For DIY Wiring Harness KTA14128 Trailer Wiring Kit For All KT & KU Series Includes Quick Connect Plug & 25 ft 6 AWG Wire Includes 72 Pigtail With Quick Connect Ideal For Trailer Mounted Winch Applications (Excluding KTSL2000RM) KUA006GA Emergency Shut-Off Switch Use With All Keeper up to 6,000 lbs Provides Easy Access to Disconnect From Main Power Supply. 6 AWG Wire Ideal For Your ATV/UTV And Utility Applications KWA AWG Wiring Harness For All KV, KW & KX Series Includes Quick Connect Plug And 25 ft of 2 AWG Wire Includes 72 Pigtail With Quick Connect Ideal For Wiring To Rear Of Vehicle KUA002GA Emergency Shut-Off Switch For Keeper KV, KW & KX, 7,500 lbs To 17,500 lbs Provides Easy Access to Disconnect From Main Power Supply Control Key Prevents Tampering With Winch When Not In Use 2 AWG Wire Additional Replacement Parts Available by Contacting Keeper Customer Service at

10 GENUINE ACCESSORIES KWA011 Flat Bed Mounting Plate Multi-fit Provides Secure Mounting Base Fits All KV, KW & KX With 10 x 4.5 Footprint (Does Not Fit KW7.5RM & KW17.5) KWA14622 Heavy Duty Flat Bed Mounting Plate Multi-fit Provides Secure Mounting Base For Use With All KV, KW, & KX Models (Excluding KW7.5RM) KWA101 Portable Winch Cradle Fits KV, KW & KX Models (Excluding KW7.5RM & KW17.5) Makes Any Winch Portable For Use In Class III Receivers KTA14131 Portable Winch Mount For all KT & KU Series Fits 2 Trailer Hitch Receiver Includes Pin & Clip KWA Reciever Hitch Mount With ¾ Bow Shackle Fits Standard Class III Receiver Hitches Fits Standard Class III Receiver Hitches (Hitch Pin Not Included) Provides A Secure Anchor Point For Clevis Hooks Or Recovery Straps KWA14050 HD Clevis Hook For Winch Capacities up Through 10,00 lbs Heavy Duty/Large Capacity All Weather Finish, OE Replacement for KX Series Of KTA15120 Pulley Block With Hook For KT Winch Capacities Up Through 4,000 lbs 8,000 lbs Capacity Doubles The Pulling Capacity Of Your Winch And Reduces Amp Draw On Winch KWA14512 Pulley Block With Hook For Winch Capacities Up Through 6,000 lbs 12,000 lbs Capacity Doubles The Pulling Capacity Of Your Winch And Reduces Amp Draw On Winch KWA14550 Medium Duty Pulley Block For Winch Capacities up Through 10,000 lbs 20,000 lbs Medium Duty/Large Capacity Doubles the Pulling Capacity of Your Winch and Reduces AMP Draw On Winch KWA14650 Heavy Duty Pulley Block For Winch Capacities up Through 18,000 lbs 36,000 lbs Heavy Duty/Large Capacity Increases Capacity and Reduces AMP Draw on Winch KTA200 Medium Frame Winch Cover Fits KT, KU, and KW7500 Series Protects Winch From Harsh Weather And UV Damage Provides Snug Fit Over Winch And Secures With Draw String KTA201 Large Frame Winch Cover Fits KV, KW and KX Series Protects Winch From Harsh Weather And UV Damage Provides Snug Fit Over Winch And Secures With Draw String 10 Additional Replacement Parts Available by Contacting Keeper Customer Service at

11 GENUINE ACCESSORIES KTA300MD General Purpose Rigging Kit Basic Accessories For All Of Your General Purpose Winching Includes: 3/4 Bow Shackle 12,000 lbs Pulley Block 2 x 6 ft Tree Saver (8,000 lbs Max. Vehicle Weight) Work Gloves Storage Bag KTA301HD Heavy Duty Rigging Kit Ultimate Accessory Kit For All Electric Includes: Two 3/4 Bow Shackles 20,000 lbs Scissor Pulley Block Two 3 x 6 ft Tree Savers (10,000 lbs Max. Vehicle Weight) Work Gloves Storage Bag KWA400ALL Winch Safety Blanket For All With Wire For Use With All Wire Electric Reduces Possibility Of Backlash If Fails Important Safety Accessory For All Using Wire KUA60065S Replacement Synthetic For Replacement Use On Up To 6,000 lbs ¼ x 60 ft With Thimble For Hook Hi-Viz Ultra-High Molecular Weight Polyethylene (UHMWPE) KVA10041S Replacement Synthetic For Replacement use on to 13,500 lbs OEM Replacement For Keeper 8,500 to 13,500 lbs. 3/8 x 100 ft Hi-Viz Ultra-High Molecular Weight Polyethylene (UHMWPE) KTA14058 Medium Frame Hawse Fairlead Use For Replacement Or Conversions To OE Replacement For KT4000S And KU Series Of KWA14051 All Weather Hawse Fairlead Fits KV, KW, KX Series of, (Excluding KW7.5RM) 2-Tone All Weather Finish OE Replacement For KX Series KWA14034 Large Frame Hawse Fairlead Fits KV, KW, KX Series Of (Excluding KW7.5RM) OE Replacement For KV Series Of KWA175SSR Stainless Steel Replacement Rollers For Use With KV, KW & KX Series Stainless Steel Roller Set Complete Replacement Roller Set To Provide Additional Protection Against Corrosion Hardware And Mounting Bracket Not Included Additional Replacement Parts Available by Contacting Keeper Customer Service at

12 Presenting the Keeper brand of products. We are proud to provide the broadest assortment of high quality products available for today s demanding consumers. Our family includes: Electric, Tie-Downs, Bungee, Truck & Trailer Accessories, and more. For over 36 years, the Keeper brand has grown to continually meet the demands of a changing marketplace; improving cargo handling and helping mold the way the world works and plays. We are committed to maintaining our reputation as a valued supplier, consistently providing the highest quality products in a timely and professional manner. Hampton Products International, Inc. 50 Icon, Foothill Ranch, CA These Products Are Not To Be Used For The Transportation Of People Or Overhead Lifting 81000_00008_REVB 01/19