Weifang Ricardo Generator

Transcription

1 Weifang Ricardo Generator Genset Model:HR-40GF Standard Features and Characteristics Quality Standards Model HR-40GF The HIGHTECHPOWER generator set compliance with main standards, Rated Power 40kw/50kva such as ISO9001(GB/T ), CE, CO, CCPIT, SAA, and so on. Standby Power 44kw/55kva Diesel engine and alternator from the exclusive manufacturer in China and their quality assurance. Other standards and certifications can be considered on requirest. Standard Features Ricardo engine K4100ZD Close coupled to a Shanghai Stamford alternator Water tank and radiator High quality circuit breaker Vibration isolators between the engine/alternator and base frame Large fuel tank with level meater Top lifting and steel base frame with forklift holes Diesel engine with 3 filters and other accessories Standard control panel 12V Non-Maintenance Battery. The tool kit and 1 set of manuals (English version). Diemension & Weight Open type with base fuel tank Overall Size 1750mm 750mm 1200mm Weight 850kg Overall Size Weight Soundproof Type 2100mm 1000mm 1500mm 1100kg NOTE: This drawing is provided for reference only and should not be used for planning installation. Contact your local distributor for more detailed information.

2 Diesel generator set Generator Model HR-40GF Rated Voltage (V) 400/230 Frequency 50Hz/60Hz Power factor 0.8 Type 3P 4W Prime Power (kw/kva) 40/50 Standby Power (kw/kva) 44/55 *Prime Power (PRP): Prime power is available for an unlimited number of annual hours in variable load application, in accordance with GB/T (eqv ISO8528); A 10% overload capability is available for a period of 1 hour within a 12-hour period of operation. *Standby Power Rating (ESP): The standby power rating is applicable for supplying emergency power for the duration of a utility power interruption. No overload, utility parallel or negotiated outage operation capability is available at this rating. *Rated Voltage: generally the rated power includes 380/220V, 400/230V, 415/24V,440/254V, we make it according to client's requiremnts. Diese Engine Data Engine Model K4100ZD diesel engines Manufacturer Weifang Cylinder No. 4L Cylin der arrangement In-line Cycle Four stroke Aspiration Turbocharged Compression ratio 17:01 Bore * Stroke 100 mm * 115mm Displacement 3.26 litres Direction of rotation Clockwise viewed from front Max. standby Power at rated rpm 46.2kw Governor Type Mechanical Lub oil Capacity (L) 10 Rated Fuel Consumption (L/h) 9.8 Specifications of Main Parts 1500RPM 50HZ Oil Pump type Single grade gear type Displacement /Speed (L/min/r/min) 62/2800 Water Pump type Centrifugal type Speed (r/min) 2800 Fuel injection pump type Governor model Ain-line plunger type RSV full range type

3 Various temperature and pressure range 1500RPM 50HZ Lub oil temperature 95 Outlet cooling water temperature 90 Lub oil pressure Fyel injection pressure 0.3~0.5MPa 0.01MPa, when at idling speed MPa Fuel Consumption 1500RPM 50HZ 100%( Prime Power) Load 218 g/kw.h 75%(Prime Power) Load 207 g/kw.h 50%(Prime Power) Load 220 g/kw.h Alternator Data Brand Shanghai Stamford Model HJI-40 Rated Power(kw/kva) 40/50 Connecting Type 3 Phase and 4 Wires, Y type connecting Number of Phase 3 Number of Bearing 1 Power Factor 0.8 Protection Grade IP23 Altitude 1000m Exciter Type Brushless, self-exciting Insulation Class, Temperature Rise H/H Telephone Influence Factor (TIF) <50 Voltage Regulation, Steady State ±1% THF <2% Alternator Efficiencies 88.60% Note: All data is based on: 1. Engine op erating with fuel system, water pump, lubricating oil pum p, air cleaner and exha ust silencer; not included are battery charging alt ernator, fan, and o ptional driven components. 2.Engine operating with fuel corresponding to grade No. 2-D per ASTM D975 3.Barometric Pressure : 100 kpa (29.53 in Hg); Relative Humidity : 30% Air Temperature : 25 (77 ); Altitude : 110 m (361 ft) Air Intake Restriction : 254 mm H2O (10 in H2O) ; Exhaust Restriction : 51 mm Hg (2 in Hg )

4 Control System Standard Control Panel Indicator type frequency, voltmeter and ampere meter demonstration unit's electrical parameter. The voltage change-over switch and the rheotrope uses for to choose the different phase voltage and current to display. Protection : Low Oil Pressure High Engine Temperature Auxiliary Shutdown Over speed Automatic Failure Controller Indicator type frequency, voltmeter an d ampere meter demonstration unit's electrical parameter. The controller Preheating button. Protection: Over Speed Shutdown Low Oil Pressure Shutdown. High Engine Temp Shutdown Charger failure alarm. Mains failure alarm. Optional Under speed Protection. Auto Module Control Panel Indicator or digital type frequency, voltmeter and ampere meter demonstration unit's electrical parameter. The big red button uses for the operator to stop the genset perem ptorily The controller Function: 24 hours monitor on the status of engine, alternator, battery, loading. Emergency stop protection for high temperature and overloaded When the speed become over 110% engine must stop by solenoid valve and will be stop in case of the following : a. Cooling temperature high, b. Oil pressure become low, c. Over Speed d. Water level become low,and so on. Show the exactly speed /water temperature/fuel pressure as dig splay. Show the mode like ready, start, pre-heat, cranking, delay, run, stop, etc. ATS after connect the switch Paralleling the electric to Main city power if required.

5 Options Engine Fuel system Control system * Heater * Daily Fuel Tank * Auto control Panel * Battery Charger * Water Separator * Remote control panel * Fuel Level Sensor * AutoTransfer Switch (ATS) * Paralleling system * Electricity output cabinet Alternator Type Others * Anti Condensation Heater * Rainproof Type * Rated voltage * Permanent Magnet Generator(PMG)* Soundproof Type * Engine Parts Drawing List * Drop CT(For Paralleling) * Trailer Type * Spare Parts Sales Promises Haitai Power provides a full line of brand new and high quality products. Each and every unit is strictly factory tesed. Warranty is according to our standard conditions: a, 15 months, counted on the day Haitai sold to the first buyer; b, One year after installation; c, 1000 running hours (accumulated); subject to the earlier one Service and parts are available from Haitai Power or distributors in your location.