ISO 9001:2008 unidad de certificación DEL AUTOMÓVIL

Transcription

1 ISO 9001:2008 unidad de certificación DEL AUTOMÓVIL

2 Contents LED warning lights LED work lamps LED daytime running lamps daytime running lamps bulb version LED rear lamps rear lamps bulb version LED clearance lamps clearance lamps bulb version LED reversing lamps reversing lamps bulb version LED fog lamps fog lamps bulb version LED number plate light number plate light bulb version LED interior lighting interior lighting bulb version indicators reflectors accessories Sign explanation Sidelight Fog light Reversing light Indicator LED diode light source Stop light Reflector Clearance light Number plate light ATTENTION! Please send your orders by at or by fax a For further information concerning our order policy see About us bookmark on our website.

3 NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW LED CLEARANCE LAMPS FT-140 LED LED CLEARANCE AND DECORATIVE LAMPS FT-045 LED LED WARNING LIGHTS FT-100 LED 2800 LM LED WORK LAMPS FT-036 LED ALU all you need is light

4 LED warning beacon FT-100 LED LED WARNING LIGHTS Series of warning lamps FT-100 LED is equipped with 20 highly efficient CREE diodes that considerably influence on optimall targeted beam of light visible even under severe weather conditions. The body is made of impact-resistant material and along with the lampshade made of polycarbonate (PC) forms an extremely solid and resistant to mechanical damage, moisture and shock product that is confirmed with the relevant certificate. High reliability, modern shape and compact design go perfectly with the modern special-purpose vehicles. Technical specifiaction: - application of 20 CREE LED diodes - universal supply votlage 12-55V Peak power consumption: 2A/1A/0,5A, average power consumption: 0,8A/0,4A/0,2A Peak/average rated power: 25W/10W - special warning lamp approval compliant with ECE Regulation 65 (TA1) - flash frequency: f = 2,0 Hz (single flash) - full waterproofness (IP68) - shock-resistance IK - operating temperature: 40 C to + 55 C - reverse polarity protection system - fixed polarisation: GROUND - white wire; (+) - black wire illumination illumination illumination illumination time time time Series of warning lamps FT-100 DF LED is equipped with 20 highly efficient CREE diodes that considerably influence on optimall targeted beam of light visible even under severe weather conditions. The body is made of impact-resistant material and along with the lampshade made of polycarbonate (PC) forms an extremely solid and resistant to mechanical damage, moisture and shock product that is confirmed with the relevant certificate. High reliability, modern time shape and compact design go perfectly with the modern special-purpose vehicles. Technical specifiaction: - application of 20 CREE LED diodes - universal supply votlage 12-55V Peak power consumption: 2A/1A/0,5A, average power consumption: 0,8A/0,4A/0,2A Peak/average rated power: 25W/10W - special warning lamp approval compliant with ECE Regulation 65 (TA1) - flash frequency: f = 2,0 Hz (double flash) - full waterproofness (IP68) - shock-resistance IK - operating temperature: 40 C to + 55 C - reverse polarity protection system - fixed polarisation: GROUND - white wire; (+) - black wire Warning lights 5

5 FT-100 LED LED warning beacon FT-100 3S LED FT-100 LED MAG M FT-100 LED MAG M Yellow LED warning beacon, mounted on 3 screws. Cable's length 1.5 m. Yellow LED warning beacon mounted on a magnet. Additionally, the lamp is equipped with a spiral cable (unfolded - 3 m, in spiral m) and a standard 12/ 24V lighter plug. Yellow LED warning beacon mounted on a magnet. Additionally, the lamp is equipped with a spiral cable (unfolded m, in spiral m) and a standard 12/ 24V lighter plug. 1 0, x39x29 15, x80x ,00 1 1, x39x29 29, x80x ,00 1 1, x39x29 34, x80x ,00 LED WORK LAMPS FT-100 3S DF LED Yellow LED warning beacon, double flash, mounted on 3 screws, cable s length 1.5 m. 1 0, x39x29 12, x80x ,00 FT-100 DF LED MAG M FT-100 DF LED MAG M Yellow LED warning beacon, double flash, portable version mounted on a magnet pad. The lamp is equipped with a spiral cable (unfolded - 3 m, in spiral - 0.6m) and a standard 12/ 24V lighter plug. Yellow LED warning beacon, double flash, portable version mounted on a magnet pad. The lamp is equipped with a spiral cable (unfolded m, in spiral m) and a standard 12/ 24V lighter plug. 1 1, x39x29 24, x80x ,00 1 1, x39x29 27, x80x ,00 FT-100 LED PI Yellow LED warning beacon, single flash. The lamp appears in a stationary version with a pipe-socket. 1 1, x39x29 13, x80x ,00 FT-100 DF LED PI Yellow LED warning beacon,double flash. The lamp appears in a stationary version with a pipe-socket. 1 1, x39x29 13, x80x ,00 6 Warning lights Warning lights 7

6 FT-036 LED ALU 2800 LED work lamps LED work lamps FT-036 LED ALU LM FT-036 LED ALU Universal LED work lamps, 9 diodes, min lm, black aluminium housing, joint holder. 1 0, x39x29 39, x80x ,00 FT-036 LED ALU 2800 MAG M Universal LED work lamps, 9 diodes, min lm, black aluminium housing, magnetic pad, joint holder. The lamp is additionally equipped with a 3 m long spiral cable (0,6 m in spiral) with a standard 12/24V cigarette lighter plug. 1 1, x39x29 29, x80x ,00 FT-036 LED ALU 2800 MAG M Universal LED work lamps, 9 diodes, min lm, black aluminium housing, magnetic pad, joint holder. The lamp is additionally equipped with a 7.8 m long spiral cable (1.2 m in spiral) with a standard 12/24V cigarette lighter plug. 1 1, x39x29 34, x80x ,00 FT-036 DS LED ALU Universal LED work lamps, min 2800 lm, 9 diodes, joint holder, black frame. The lamp is additionally equiped with DEUTSCH STECKER SOCKET built-in. 1 0, x39x29 39, x80x ,00 The new series of universal LED work lamps FT-036 LED ALU 2800 is equipped with higly efficient CREE LED s and an alluminium housing that brings outstanding lighting parameters. Fristom work lamps are widely used both in road and water transportation, agriculture, construction and water sports. They are characterised by relatively low power consumption. Rated power of FT-036 LED ALU 2800 lamps fluctuate around 34W! Small overall dimensions make possible to mount the lamps in the most inaccessible locations. The housing and other lamp parts are made of top quality materials and electronic components highly resistant to both high and low temperatures, mechanical damages and vibrations. - universal suply voltage from 12V up to 55V DC - power consumption: 12V/24V/48V = 2,8A/1,4A/0,7A - rated power: 34W - color temperature: around 6.000K (Kelvin) - effective (measured) light beam min lm - lamp with an aluminium housing, 9 x CREE LED s - full waterproofness (IP68) - shock-resistance IK - operating temperature: 40 C to + 55 C - reverse polarity protection system - fixed polarisation: GROUND white wire; (+) black wire WARNING! The aluminium housing of FT-036 LED ALU 2800 work lamps also performs the function of the heat sink and may become very hot! FT-036 RAM B FT-036 RAM CZ FT-036 RAM C FT-036 RAM ZIEL FT-036 RAM SZ FT-036 RAM Z FT-036 RAM MIX Removable frame for FT-036 LED work lamps. White color. Removable frame for FT-036 LED work lamps. Black color. Removable frame for FT-036 LED work lamps. Red color. Removable frame for FT-036 LED work lamps. Green color. Removable frame for FT-036 LED work lamps. Grey color. Removable frame for FT-036 LED work lamps. Yellow color. Set of (6 pcs.) removable frames for FT-036 work lamp, MIX - all colors. 5 0,10 5 0,10 5 0,10 5 0,10 5 0,10 5 0,10 6 0, m (3 m) / 1.2 m (7.8 m) Uchwyt OMEGA «OMEGA» mounting holder of KO metal sheet for FT-036 work lamps. 10 0,60 Uchwyt OMEGA INOX «OMEGA» mounting holder of INOX metal sheet for FT-036 work lamps. 10 0,45 magnetic pad standard 12/24 V plug MAG FT Magnetic pad for FT-036 work lamps with a rubber cover. 1 0,45 Omega holder is not included in the basic accessories of the lamp FT-036 LED ALU Work lamps Work lamps 9

7 FT-036 LED LED work lamps LED work lamps FT-036 LED 0.6m(3m)/ 1.2m(7.8m) 1300 LM magnetic pad standard 12/24 V plug FT-036 LED Universal LED work lamps, joint holder, black colour casing. 1 0, x39x29 28, x80x ,00 FT-036 B LED Universal LED work lamps, joint holder, white colour casing. Made by applying acid-resistant mounting elements. Designed especially for watercraft. 1 0, x39x29 24, x80x ,00 FT-036 LED MAG M Universal LED work lamps, 9 diods, magnetic joint holder, black colour casing. The lamp is additionally equipped with a 3 m long spiral lead (in spiral 0.6 m) with a standard 12/24 V cigarette lighter socket plug. 1 1, x39x29 24, x80x ,00 FT-036 LED MAG M Universal LED work lamps, 9 diods, magnetic joint bracket, black colour casing. The lamp is additionally equipped with a 7.8 m long spiral lead (in spiral 1.2 m) with a standard 12/24 V cigarette lighter socket plug. 1 1, x39x29 28, x80x ,00 Series of universal LED work lamps FT-036 is equipped with highly efficient LED diodes made by OSRAM. That process allowed us to obtain high light paramtres, about 1300 lm for rated power consumption 13,5W. Those lamps are widely used in both road and water transportation, agriculture, construction and in every sphere where severe atmospheric conditions occur including high humidity. The body is made of shock proof material and along with the lampshade made of polycarbonate (PC) form an extremely solid and resistant to mechanical damage, moisture and shock product that is confirmed with the relevant certificate. The small size allows the lamp to be placed in even the most inaccessible places. FT-036 DS LED FT-036 RAM B FT-036 RAM CZ Universal LED work lamps 1300 lm, 9 diodes, joint holder, black colour housing with a Deutsch Stecker socket. Removable frame for FT-036 LED work lamps. White color. Removable frame for FT-036 LED work lamps. Black color. 1 0, x39x29 28, x80x ,00 5 0,10 5 0,10 - universal supply votlage from 12V up to 55V DC - power consumption: 12V/24V/48V = 1,1A/0,55A/0,28A - rated power: 13,5W - color temperature: around 6.000K (Kelvin) - effective (measured) light beam min lm - 9 x OSRAM LED s - full waterproofness (IP68) - shock-resistance IK - operating temperature: 40 C to + 35 C - reverse polarity protection system - fixed polarisation: GROUND - white wire; (+) - black wire 40 FT-036 RAM C FT-036 RAM ZIEL FT-036 RAM SZ Removable frame for FT-036 LED work lamps. Red color. Removable frame for FT-036 LED work lamps. Green color. Removable frame for FT-036 LED work lamps. Grey color. 5 0,10 5 0,10 5 0,10 FT-036 RAM Z Removable frame for FT-036 LED work lamps. Yellow color. 5 0,10 FT-036 RAM MIX Set of (6 pcs.) removable frames for FT-036 work lamp, MIX - all colors. 6 0,12 Uchwyt OMEGA «OMEGA» mounting holder of KO metal sheet for FT-036 work lamps. 10 0,60 Uchwyt OMEGA INOX «OMEGA» mounting holder of INOX metal sheet for FT-036 work lamps. 10 0,45 MAG FT Magnetic pad for FT-036 work lamps with a rubber cover. 1 0,45 Omega holder is not included in the basic accessories of the lamp FT-036 LED. 10 Work lamps Work lamps 11

8 LED daytime running lamps FT-030 LED DAYTIME RUNNING LAMPS LED daytime running lamp low power consumption. - reverse polarity protection system - automatic switching-off of daytime running lamps at vehicle start (STANDBY system) - supply voltage: 12-55V - operating temperature: 40 C to + 35 C Power consumption / Rated power consumption: 12V/24V = 0,18A/2,2W; 0,09A/2,2W FT-030 LED Daytime running LED lamp (1 pcs). 1 0, x39x29 12, x80x ,00 FT-030 LED SET Set of daytime running LED lamps (2 pcs). 2 0, x39x29 21, x80x ,00 12 Daytime running lamps Daytime running lamps 13

9 LED daytime running lamps LAQ040 Car manufacturers increasingly equip cars with additional LED lights for daytime driving called DRL (Daytime Running Lights). There is also undoubtedly the fashion for installation this type of lighting in older vehicles. As show the recent laboratory studies made by major automotive manufacturers of lighting systems it is not solely dictated by the desire to embellish the car, but action to achieve savings during its everyday use. ECONOMICS AND VERSATILITY The set of ordinary halogen bulbs applied in low beam headlamps uses about W. The set of two daytime running lamps LPQ080 produced by Magneti Marelli, made using the latest generation of LED consumes only 4W (2x2W), which is certainly an excellent result among all the major manufacturers of this type of lighting. In addition, long service life of the DRL diodes, used in the set of LPQ080 reaches up to hours of continuous operation, which is several times more than standard bulbs. This translates immediately to reduce fuel consumption of up to 0,25 L / 100km, because that much consumes a moving car with low-beam headlamps. Daytime running lamps do not practically affect the size of the combustion of a car, and their use is essentially maintenancefree. A wide range of options for power supply of daytime running lamps kit LPQ080 of Magneti Marelli (12V / 24V) gives great versatility of use (passenger cars, vans and trucks). SAFETY BE VISIBLE According to European Commission Regulation ECE R87 all new passenger car models that obtained homologation after must necessarily be equipped by the factory with daytime running lights. Excellent visibility of the car in the set of Magneti Marelli daytime running lamps LPQ080 provides LED that emit light at very high colour temperature, as much as 6000 Kelvin s degrees. Such light is visibly cutting off from natural sunlight and does not dazzle. The bright, white color ensures that we run the car which is already noticeable from a distance to other road users. A car equipped with daytime running lamps can use them during the day as the primary lighting. HOW TO CHOOSE THE PROPER ONE? In this case, we must be very careful. To make the use of this kind of light legal, it has to meet several conditions. The cheap sets present on the market, sold as daytime running lamps, often have no characteristics and certificates required by law. First of all, when deciding to purchase this type of lights, it should be noted that they have HOMOLOGATION. Its E-mark together with the identification code of the country, which issued the certificate should be kept on the glass lamps DRL. Choose only the daytime lamps approved for use with a clear, indelible and visible markings after installation on the lens reflector in the form of letters RL and with a number of version of the Regulations under which the certificate was issued. The minimum required by European regulations approval, the illuminating surface of each of the daily lamps should be 25 cm². A set of daytime running lamps LED LPQ080 of Magneti Marelli, of course, has all features listed above and required by law. STANDBY SYSTEM According to law, DRL lights should automatically turn on and in such standard daytime running lights LPQ080 of Magneti Marelli work. Used in this set electronic system sleep STANDBY turn on DRL headlights with the starting of the vehicle and the emergence of an appropriate voltage in the electrical system, and daytime running lights automatically turn off after starting low beam headlamp, high beam headlamp and fog lamps. Set of LED daytime running lamps low power consumption - reverse polarity protection system - automatic switching-off of daytime running lamps at vehicle start (STANDBY system), The set is fully accustomed to the hybrid vehicles drivetrain and the start-stop engine system. - voltage range: 12-36V DC Power consumption / Rated power consumption: 12V/24V = 0,28A/3,4W; 0,14A/3,4W PROPER INSTALLATION Although the connection of daytime lamps set LPQ080 Magneti Marelli for the electrical system of the car is very simple, it has to be made according to strict rules of law and based on the absolutely basic knowledge of electrical installations. Detailed instruction in the picture version, included with each set of daily lamps LPQ080 Magneti Marelli makes its installation not complicated and time consuming for the average user of the car. LAQ040 Set of Daytime Running Lamps, 18-LED, carton box, 2 pcs. All accessories and instalation manual included. 1 0, x39x29 12, x80x ,00 14 Daytime running lamps Daytime running lamps 15

10 LPQ080 LED daytime running lamps LED daytime running lamps LAQ010 Set of LED daytime running lamps very low power consumption - reverse polarity protection system - automatic switching-off of daytime running lamps at vehicle start (STANDBY system), Set of LED daytime running lamps very low power consumption - reverse polarity protection system - automatic switching-off of daytime running lamps at vehicle start (STANDBY system), The set is fully accustomed to the hybrid vehicles drivetrain and the start-stop engine system. - voltage range: 12-36V DC Power consumption / Rated power consumption: 12V/24V = 0,22A/2,6W; 0,11A/2,6W - voltage range: 12-36V DC Power consumption / Rated power consumption: 12V/24V = 0,22A/2,6W; 0,11A/2,6W LPQ080 Set of Daytime Running Lamps, 4-LED, carton box, 2 pcs. All accessories and instalation manul included. 1 0, x39x29 14, x80x ,00 LAQ010 Set of Daytime Running Lamps, 4-LED, round, carton box, 2 pcs. All accessories and installation manual included. 1 0, x39x29 17, x80x ,68 16 Daytime running lamps Daytime running lamps 17

11 MM LED workshop lamp LED workshop lamp MM Battery level indicator 3W +3W swivel workshop lamp Features and specification: - 3W front COBLED >240 lumen - 3W top SMD LED >160 lumen degrees rotation - magnet at the bottom part of the grip - nest type hooks on the top/bottom part of the grip - charging port with battery level indicator - operating time 2-3 hours - charging time 3-4 hours - 5V 1A CE adapter with mini-usb cable 120 fold LED workshop lamp 1.3W high power pocket light Features and specification: - 1.3W high power LEDs >80 lumen - double injection moulded housing - hook/clamp 360 degrees rotation - 3 x AAA battery power MM MM Retractable hooks on the top and bottom of the lamp LED workshop lamp 3W +3W mini swivel workshop lamp Features and specification: - 0.9W front COBLED lumen - 0.9W top SMD LED lumen degrees rotation - magnet at the bottom part of the grip - nest type hooks on the top/bottom part of the grip - charging port with battery level indicator - operating hours charging hours V 1A CE adapter with mini-usb cable Base with magnet MM W +3W swivel workshop lamp Features and specification: - 3W front COBLED >240 lumen - top LED with UV, 395~410um degrees rotation - magnet at the bottom part of the grip - nest type hooks on the top/bottom part of the grip - charging port with battery level indicator - operating time 2-3 hours - charging time 3-4 hours - 5V 1A CE adapter with mini-usb cable LED workshop lamp LED workshop lamp 3W+UV mini swivel workshop lamp Features and specification: - 0.9W front COBLED lumen - top LED with UV, 395~410um degrees rotation - magnet at the bottom part of the grip - nest type hooks on the top/bottom part of the grip - charging port with battery level indicator - operating hours charging hours V 1A CE adapter with mini-usb cable MM Rotating grip with magnet LED workshop lamp MM W folding workshop lamp Features and specification: - 2.5W COB LED >70/230 lumen - folding grip with magnet, 360 degrees rotation - retractable rotating hook/clamp, 360 degrees rotation - operating hours 3,4 - charging hours 2, V 1A CE adapter with mini-usb cable 2.5W COB >230 lumen Retractable hook, 360 rotation 15W SMD wired under hood workshop lamp Features and specification: - 15W SMD LED provide local lighting, lm at half power, lm at full power - brightness switch to select half or full power lighting - ABS injection moulded grip with shock-resistant protection; ergonomic design for easy use - aluminium alloy hook with PVC cover, soft hook covers prevent scratching the vehicle - 47 to 75 adjustable bar; easy mounting to most trucks and SUVs. - Finger hooks (360 ) for firm and secure grip 18 Workshop lamps Workshop lamps 19

12 FT-057/058 Daytime running lamps Lampy jazdy dziennej FT-057/058 REAR LAMPS FT-057 P Daytime running lamp, mounted on a joint. 1 0, x39x29 13, x80x ,00 FT-057 S Daytime running lamp, mounted on 2 M5 screws. 1 0, x39x29 10, x80x ,60 FT-058 P N Daytime running lamp, mounted on a joint. 1 0, x39x29 13, x80x ,00 FT-058 S N Daytime running lamp, mounted on 2 M5 screws. 1 0, x39x29 10, x80x ,60 FT-058 P B Daytime running lamp, mounted on a joint. 1 0, x39x29 13, x80x ,00 FT-058 S B Daytime running lamp, mounted on 2 M5 screws. 1 0, x39x29 10, x80x ,60 FT-057/058 NK Lampshade FT-057/058, blue. FT-057/058 BK Lampshade FT-057/058, white. 20 Daytime running lamps Daytime running lamps 21

13 FT-130 LED Universal LED rear lamps Universal LED rear lamps FT-130 LED stop reversing ground rear position registration plate FT-130 PM LED reference rear direction necessary plug space stop reversing ground rear position registration plate reference rear direction FT-130 COF LED stop czerwony cofania niebieski masa biały pozycja tył + oświetlenie tablicy rejestracyjnej brązowy lub czarny odniesienie tylny kierunkowskaz zielony lub żółty FT-130 PM LED functional LED rear lamp with the position, fog, STOP, an indicator and a number plate lights with reflector, 1 m cable. Unit stop pack czerwony Multipack / carton Multipack / pallet cofania niebieski qty. masa biały kg qty. cm kg qty. cm kg pozycja tył + oświetlenie tablicy rejestracyjnej brązowy lub czarny odniesienie 1 tylny kierunkowskaz 0,26 34 zielony 59x39x29 lub żółty 8, x80x ,80 FT-130 COF LED functional LED rear lamp with the position, reversing, STOP, an indicator and a number plate lights with reflector, 1 m cable. 1 0, x39x29 8, x80x ,80 6-functional universal LED rear lamp - low power consumption - european homologation E9 - ElectroMagnetic Compatibility (EMC) homologation - reverse polarity protection system - rear running light - number plate light homologated on an universal performance 34,4mm<<X>>102,2mm - STOP light - indicator - fog light (FT-130 PM LED) or reversing (FT-130 COF LED) light (depending on the product version) - reflector Power consumption: - rear running light + number plate light 12V/ 24V = 0,25/ 0,21A - STOP light 12V/ 24V = 0,08A/0,08A - indicator 12V/ 24V = 0,11A/0,11A - fog light 12V/ 24V = 0,12A/ 0,6A - reversing light 12V/ 24V = 0,28A/ 0,14A - rear running light + number plate light 12/ 24V = 3W/ 5W - STOP light 12V/ 24V = 1W/ 2W - indicator 12V/ 24V = 1,5W/ 3W - fog light 12V/ 24V = 1,5W/1,5W - reversing light 12/ 24V = 3,5W/3,5W FT-130 PM LED BAJONET FT-130 COF LED BAJONET FT-130 NT PM LED FT-130 NT COF LED FT-130 NT PM LED BAJONET functional LED rear lamp with the position, fog, STOP, an indicator and a number plate lights with reflector, 5PIN Bayonet connector. 6-functional LED rear lamp with the position, reversing, STOP, an indicator and a number plate lights and reflector, 5PIN Bayonet connector. 5-functional LED rear lamp with the position, fog, STOP, an indicator lights, without a number plate light with reflector, 1 m cable. 5-functional LED rear lamp with the position, reversing, STOP, an indicator lights without a number plate light with reflector, 1 m cable. 5-functional LED rear lamp with the position, fog, STOP, an indicator lights without a number plate lights with reflector, 5PIN Bayonet connector. 1 0, x39x29 7, x80x ,40 1 0, x39x29 7, x80x ,40 1 0, x39x29 8, x80x ,80 1 0, x39x29 8, x80x ,80 1 0, x39x29 7, x80x ,40 FT-130 NT COF LED BAJONET functional LED rear lamp with the position, reversing, STOP, an indicator lights without a number plate lights with reflector, 5PIN Bayonet connector. 1 0, x39x29 7, x80x ,40 22 Rear lamps Rear lamps 23

14 FT-120 LED / FT-121 LED / FT-122 LED Universal LED rear lamps Universal LED rear lamps FT-120 LED / FT-121 LED / FT-122 LED necessary plug space cabel outlet FT-120 LED FT-121 LED FT-122 LED necessary plug space stop ground rear position cabel outlet rear direction reference 25 RELATED PRODUCTS: FT-123 LED p. 99 FT-124 LED p functional universal LED rear lamp low power consumption - the lamp is homologated to be mounted horizontally and vertically as well - reverse polarity protection system - rear position light - STOP light - indicator FT-120 LED FT-120 LED BAJONET Universal LED rear lamp 12-36V, 3-functional, colorless lampshade, 1 m cable. Universal LED rear lamp 12-36V, 3-functional, colorless lampshade, 5PIN BAYONET connector. 1 0, x39x29 28, x80x ,60 1 0, x39x29 22, x80x ,60 FT-121 LED Universal LED rear lamp 12-36V, 3-functional, colorless lampshade with a yellow filter of an indicator, 1 m cable. 1 0, x39x29 28, x80x ,60 Power consumption: - rear position light 12V/24V = 0,06A/0,06A - STOP light 12V/24V = 0,08A/0,08A - indicator 12V/24V = 0,08A/0,08A FT-121 LED BAJONET Universal LED rear lamp 12-36V, 3-functional, colorless lampshade with a yellow filter of an indicator, 5PIN BAYONET connector. 1 0, x39x29 22, x80x ,60 - rear position light 12V/24V = 0,75W/1,5W - STOP light 12V/24V = 1W/2W - indicator 12V/24V = 1W/2W FT-122 LED Universal LED rear lamp 12-36V, 3-functional, colorless lampshade with a red filter of a STOP light and a yellow filter of an indicator, 1 m cable. 1 0, x39x29 28, x80x ,60 FT-122 LED BAJONET Universal LED rear lamp 12-36V, 3-functional, colorless lampshade with a red filter of a STOP light and yellow of an indicator, 5PIN BAYONET connector. 1 0, x39x29 22, x80x ,60 24 Rear lamps Rear lamps 25

15 FT-120 T / FT-121 T / FT-122 T LED Universal LED rear lamps Universal LED rear lamps FT-120 T LED / FT-121 T LED / FT-122 T LED FT-122 T LED FT-120 T LED FT-121 T LED stop ground rear position registration plate necessary plug space reference rear direction RELATED PRODUCTS: FT-123 LED p. 99 FT-124 LED p functional universal LED rear lamp low power consumption - the lamp is homologated to be mounted horizontally and vertically as well - reverse polarity protection system - rear position light - STOP light - indicator - number plate light Power consumption: - rear position light + license plate light 12V/24V = 0,14A/0,14A - STOP light 12V/24V = 0,08A/0,08A - indicator 12V/24V = 0,08A/0,08A - rear position light + license plate light 12V/24V = 1,65W/3,3W - STOP light 12V/24V = 1W/2W - indicator 12V/24V = 1W/2W FT-120 T LED FT-120 T LED BAJONET FT-121 T LED FT-121 T LED BAJONET FT-122 T LED FT-122 T LED BAJONET Universal LED rear lamp 12-36V, 4-functional with a number plate light, colorless lampshade, 1 m cable. Universal LED rear lamp 12-36V, 4-functional with a number plate light, colorless lampshade, 5PIN BAYONET connector. Universal LED rear lamp 12-36V, 4-functional with a number plate light, colorless lampshade with a yellow filter of an indicator, 1 m cable. Universal LED rear lamp 12-36V, 4-functional with a number plate light, colorless lampshade with a yellow filter of an indicator, 5PIN BAYONET connector. Universal LED rear lamp 12-36V, 4-functional with a number plate light, colorless lampshade with a red filter of a STOP light and a yellow filter of an indicator, 1 m cable. Universal LED rear lamp 12-36V, 4-functional with a number plate light, colorless lampshade with a red filter of a STOP light and yellow filter of an indicator, 5PIN BAYONET connector. 1 0, x39x29 28, x80x ,60 1 0, x39x29 22, x80x ,60 1 0, x39x29 28, x80x ,60 1 0, x39x29 22, x80x ,60 1 0, x39x29 28, x80x ,60 1 0, x39x29 22, x80x ,60 26 Rear lamps Rear lamps 27

16 FT-110 LED Universal LED rear lamps Trifunctional LED combination rear lamp FT-032 LED 3-functional universal LED rear lamp low power consumption - reverse polarity protection system - rear position light - STOP light - indicator RELATED PRODUCTS: FT-041 LED p. 94 FT-040 LED p. 99 RELATED PRODUCTS: FT-111 LED p. 98 FT-112 LED p. 92 cabel outlet Power consumption: - rear position light 12V/24V = 0,1A/0,1A - STOP light 12V/24V = 0,08A/0,08A - indicator 12V/24V = 0,08A/0,08A - rear position light 12V/24V = 1,2W/2,4W - STOP light 12V/24V = 1W/2W - indicator 12V/24V = 1W/2W 3-functional universal LED rear combination lamp low power consumption - the lamp is homologated to be mounted horizontally and vertically as well - reverse polarity protection system - rear position light - STOP light - indicator Power consumption: - rear position light 12V/24V = 0,04A/0,02A - STOP light 12V/24V = 0,2A/0,1A - indicator 12V/24V = 0,25A/0,125A stop ground rear position rear direction reference BAYONET BAYONET - rear position light 12V/24V = 0,5W/0,5W - STOP light 12V/24V = 2,4W/2,4W - indicator 12V/24V = 3W/3W stop ground rear position rear direction reference FT-032 LED Universal LED rear lamp with a wiring loom, smoked lampshade. 1 0, x39x29 15, x80x ,00 FT-032 LED BAJONET Universal LED rear lamp, with a bayonet connector, smoked lampshade. 1 0, x39x29 16, x80x ,00 FT-032 LED BAJONET PM Universal LED rear lamp with a bayonet connector and an additional fog or reverse light power supply cable, smoked lampshade. 1 0, x39x29 17, x80x ,00 FT-032 B LED Universal LED rear lamp with a wiring loom, white lampshade. 1 0, x39x29 15, x80x ,00 FT-110 LED Universal LED 3-functional rear lamp 12/ 24V, round, 1 m wiring loom. 1 0, x39x29 20, x80x ,00 FT-032 B LED BAJONET Universal LED rear lamp, bayonet connector, white lampshade. 1 0, x39x29 16, x80x ,00 FT-110 LED BAJONET Universal 3-functional LED rear lamp 12/ 24V, round, 5 PIN Bayonet connector. 1 0, x39x29 16, x80x ,00 FT-032 B LED BAJONET PM Universal LED rear lamp with a bayonet connector and additional fog or reverse light power supply cable, white lampshade. 1 0, x39x29 17, x80x ,00 28 Rear lamps Rear lamps 29

17 FT-014 Five-segment rear lamp Seven-segment rear lamp FT M8 FT-014 L Left rear lamp with a number plate light. 1 0, x51x43 22, x80x144 84,52 FT-042 L Left rear lamp with a number plate light and a cable. 1 1, x51x43 19, x80x ,00 FT-014 P Right rear lamp. 1 0, x51x43 23, x80x144 86,44 FT-042 P Right rear lamp 1 1, x51x43 19, x80x ,00 FT-014 K Universal lampshade. 1 0, x39x29 8, x80x165 68,20 FT-042 K Universal lampshade (right and left). 1 0, x39x29 8, x80x ,20 FT-014/1 Five-segment rear lamp Seven-segment rear lamp FT M M8 ø13 opening for cables M8 cables FT-014/1 L Left rear lamp with number plate lighting and a cable. 1 0, x51x43 19, x80x ,24 FT-028 L Left rear lamp with a number plate light and a cable. 1 1, x51x43 18, x80x ,60 FT-014/1 P Right rear lamp 1 0, x51x43 19, x80x ,24 FT-028 P Right rear lamp 1 1, x51x43 18, x80x ,60 FT-014 K Universal lampshade. 1 0, x39x29 8, x80x ,00 FT-028 K Universal lampshade (right and left). 1 0, x39x29 4, x80x ,60 30 Rear lamps Rear lamps 31

18 FT-021 Rear lamp for semi-trailers Rear lamp with a triangular reflector for trailers FT-077 FT-077 FT-077 Bajonet FT-021 L FT-021 P Left rear lamp with a number plate light and a cable. Right rear lamp 1 1, x51x43 21, x80x ,40 1 1, x51x43 21, x80x ,40 FT-077 LPM FT-077 PCOF Left lamp with a fog light. Right lamp with a reversing light. 1 0, x39x29 12, x80x ,00 1 0, x39x29 12, x80x ,00 FT-021 KL Left lampshade. 1 0, x39x29 11, x80x165 96,28 FT-077 LCOF Left lamp with a reversing light. 1 0, x39x29 12, x80x ,00 FT-021 KP Right lampshade. 1 0, x39x29 11, x80x165 96,28 FT-007 Rear lamp for semi-trailers FT-077 PPM FT-077 LPM BAJONET Right lamp with a fog light. Left lamp with a fog light and a bayonet plug. All cables and bulbs included. 1 0, x39x29 12, x80x ,00 1 0, x39x29 13, x80x ,00 FT-077 PCOF BAJONET Right lamp with a fog light and a bayonet plug. All cables and bulbs included. 1 0, x39x29 13, x80x ,00 FT-077 LCOF BAJONET Left lamp with a fog light and a bayonet plug. All cables and bulbs included. 1 0, x39x29 13, x80x ,00 FT-077 PPM BAJONET Right lamp with a fog light and a bayonet plug. All cables and bulbs included. 1 0, x39x29 13, x80x ,00 FT-077 KLPM Left lampshade with a fog light. 1 0, x39x29 12, x80x ,80 FT-077 KPCOF Right lampshade with a reversing light. 1 0, x39x29 12, x80x ,80 FT Universal rear lamp (MF type). 1 0, x39x29 16, x80x ,00 FT-077 KLCOF Left lampshade with a reversing light. 1 0, x39x29 12, x80x ,80 FT-007 K Lampshade. 10 0, x39x29 17, x80x ,00 FT-077 KPPM Right lampshade with a fog light. 1 0, x39x29 12, x80x ,80 32 Rear lamps Rear lamps 33

19 FT-088 Rear lamp with a triangular reflector for trailers Rear lamp with a triangular reflector for trailers FT Ø standard bayonet Ø25 through rubber Ø16 Attention! Bayonet socket is not included in the standart version FT-088 LPM FT-088 PCOF Left lamp with a fog light and a number plate light. Right rear lamp with a reversing light and a number plate light. 1 0, x39x29 12, x80x ,00 1 0, x39x29 12, x80x ,00 Rear combination lamp with an indicator built-in triangular reflector for trailers with all functions: - position light, - STOP light, - indicator, - fog light, - reversing light. Attention! Bayonet socket is not included in the standart version. standard bayonet Ø25 through rubber FT-088 LCOF Left rear lamp with a reversing light and a number plate light. 1 0, x39x29 12, x80x ,00 FT-088 PPM Right rear lamp with a fog light and a number plate light. 1 0, x39x29 12, x80x ,00 FT-089 L Left rear lamp with a fog light, reversing light and a number plate light. 1 0, x39x29 13, x80x ,00 FT-088 LPM BAJONET FT-088 PCOF BAJONET FT-088 LCOF BAJONET FT-088 PPM BAJONET Left rear lamp with a fog light and a bayonet connector (5 PIN). All cables and bulbs included. Right rear lamp with a reversing light and a bayonet connector (5 PIN). All cables and bulbs included. Left rear lamp with a reversing light and a bayonet connector. All cables and bulbs included. Right rear lamp with a fog light and a bayonet connector. All cables and bulbs included. 1 0, x39x29 13, x80x ,00 1 0, x39x29 13, x80x ,00 1 0, x39x29 13, x80x ,00 1 0, x39x29 13, x80x ,00 FT-089 P FT-089 P PK FT-089 L BAJONET 6PIN FT-089 P BAJONET 6PIN FT-089 L AMP 7PIN Right rear lamp with a fog light, reversing light and a number plate light. Right rear lamp with a reversing light and a number plate light. Left rear lamp with a fog light, reversing light, number plate light and a 6 PIN bayonet connector. All cables and bulbs included. Right rear lamp with a fog light, reversing light, number plate light and a 6 PIN bayonet connector. All cables and bulbs included. Left rear lamp with a fog light, reversing light, number plate light and a 7 PIN AMP connector. All cables and bulbs included. 1 0, x39x29 13, x80x ,00 1 0, x39x29 12, x80x ,00 1 0, x39x29 14, x80x ,00 1 0, x39x29 14, x80x ,00 1 0, x39x29 15, x80x ,00 FT-088 KLPM Left lampshade with a fog light. 1 0, x39x29 9, x80x ,80 FT-089 P AMP 7PIN Right rear lamp with a fog light, reversing light, number plate light and a 7 PIN AMP connector. All cables and bulbs included. 1 0, x39x29 15, x80x ,00 FT-088 KPCOF Right lampshade with a reversing light. 1 0, x39x29 9, x80x ,80 FT-089 P PK BAJONET 5PIN Right rear lamp with a reversing light, number plate light and a 5 PIN bayonet connector. All cables and bulbs included. 1 0, x39x29 13, x80x ,00 FT-088 KPPM Right lampshade with a fog light. 1 0, x39x29 9, x80x ,80 FT-089 KL Left lampshade with a fog light and a reversing light. 1 0, x39x29 9, x80x ,80 FT-088 KLCOF Left lampshade with a reversing light. 1 0, x39x29 9, x80x ,80 FT-089 KP Right lampshade with a fog light and a reversing light. 1 0, x39x29 9, x80x ,80 34 Rear lamps Rear lamps 35

20 MD-036/036 B Combination rear lamp for trailers and vans Rear lamp with a reflector for trailers and vans 551 MD-036 L Left rear lamp with a fog light and a number plate light. 1 0, x39x29 13, x80x , L Left rear lamp with a number plate light. 1 0, x39x29 13, x80x , P Right lamp. 1 0, x39x29 13, x80x ,20 MD-036 P Right rear lamp with a reversing light and a number plate light. 1 0, x39x29 13, x80x , KL Left lampshade. 1 0, x30x31 8, x80x ,00 MD-036 L BAJONET Left rear lamp with a fog light, number plate light, bayonet connector and a bulb. 1 0, x39x29 16, x80x , KP Right lampshade. 1 0, x30x31 8, x80x ,00 MD-036 P BAJONET Right rear lamp with a reversing light, number plate light, bayonet connector and a bulb. 1 0, x39x29 16, x80x ,00 Round rear lamp for semi-trailers FT-099 MD-036 KL Left lampshade. 1 0, x39x29 9, x80x ,00 22,5 MD-036 KP Right lampshade. 1 0, x39x29 9, x80x ,00 MD-036 L B Left rear lamp with a fog light and a number plate light. 1 0, x39x29 13, x80x ,00 M MD-036 P B Right rear lamp with a reversing light and a number plate light. 1 0, x39x29 13, x80x ,00 ø142 MD-036 L B BAJONET Left rear lamp with a fog light, number plate light, 5 PIN bayonet connector and a bulb. 1 0, x39x29 16, x80x ,00 MD-036 P B BAJONET Right rear lamp with a white lampshade, reversing light, number plate light, 5 PIN bayonet connector and a bulb. 1 0, x39x29 16, x80x ,00 FT-099 L Left rear lamp with a number plate light. 1 0, x39x29 8, x80x ,00 MD-036 KLB Left lampshade. 1 0, x39x29 9, x80x ,00 FT-099 P Right lamp. 1 0, x39x29 8, x80x ,00 MD-036 KPB Right lampshade. 1 0, x39x29 9, x80x ,00 FT-099 K Universal lampshade. 1 0, x39x29 10, x80x ,00 36 Rear lamps Rear lamps 37

21 MD-014 Rear lamp, Polonez Truck type Rear lamp for trailers and vans FT-002 FT-002 L Left rear lamp with a fog light and a number plate light. 1 0, x39x29 13, x80x ,40 MD-014 L Left rear lamp. 1 0, x39x29 14, x80x ,00 FT-002 P Right rear lamp with a reversing light and a number plate light. 1 0, x39x29 13, x80x ,40 MD-014 P Right rear lamp. 1 0, x39x29 14, x80x ,00 FT-002 KL Left lampshade. 1 0, x39x29 10, x80x ,00 MD-014 K Rear lampshade. 1 0, x39x29 25, x80x ,40 FT-002 KP Right lampshade. 1 0, x39x29 10, x80x ,00 MD segment rear lamp, Polonez Truck type / smooth lampshade Rear lamp for trailers and vans 549 ID Photo Description 549 L Left rear lamp with a number plate light. 1 0, x39x29 13, x80x ,40 MD-022 L Left rear lamp. 1 0, x39x29 13, x80x , P Right rear lamp. 1 0, x39x29 13, x80x ,40 MD-022 P Right rear lamp. 1 0, x39x29 13, x80x , KL Left lampshade. 1 0, x30x31 6, x80x ,00 MD-022 K Rear lampshade. 1 0, x39x29 19, x80x , KP Right lampshade. 1 0, x30x31 6, x80x ,00 38 Rear lamps Rear lamps 39

22 FT segment rear lamp with an integrated socket Universal rear lamp for trailers MD-002 FT-035 L Left rear lamp. 1 0, x51x43 19, x80x ,28 FT-035 P Right rear lamp. 1 0, x51x43 19, x80x ,28 MD-002 L Left rear lamp with a number plate light. 1 0, x39x29 18, x80x ,00 FT-035 KL Left lampshade. 1 0, x39x29 8, x80x ,80 MD-002 P Right rear lamp without a number plate light. 1 0, x39x29 18, x80x ,00 FT-035 KP Right lampshade. 1 0, x39x29 8, x80x ,80 MD-002 L BAJONET Left rear lamp with a number plate light and a 5PIN bayonet connector. 1 0, x39x29 20, x80x ,00 MD-016 Round universal rear lamp for semi-trailers MD-002 P BAJONET Right rear lamp without a number plate light with a 5PIN bayonet connector. 1 0, x39x29 20, x80x ,00 MD-002 K Universal lampshade. 1 0, x39x29 12, x80x ,20 ID Photo Description MD-016 L Left rear lamp with a number plate light. 1 0, x39x29 10, x80x ,80 MD-016 P Right rear lamp. 1 0, x39x29 10, x80x ,80 MD-016 K Universal lampshade. 1 0, x39x29 10, x80x ,00 40 Rear lamps Rear lamps 41

23 LED clearance und decorative lamps FT-045 LED CLEARANCE LAMPS 1-functional LED clearance lamp low power consumption. for (white,red and yellow light) In a standard version the lamps are applied to be mounted on the flat surfaces. Optionally the installation at the grille saver bull bars, bumper guards and body armors can be carried out by using a transparent FT-045 PG T rubber gasket that is not included in a standard version of the product. - clearance light (white, yellow and red) - decorative light (blue and green) Power consumption: - clearance light: 12V/24V = 0,08A/0,08A - clearance light: 12V/24V = 1W/2W Ø FT-045 Z LED Clearance marker LED lamp, yellow, 2x0.75 mm² cable (0.5 m). 1 0,06 FT-045 C LED Clearance marker LED lamp, red, 2x0.75 mm² cable (0.5 m). 1 0,06 FT-045 B LED Clearance marker LED lamp, white, 2x0.75 mm² cable (0.5 m). 1 0,06 LED Clearance lamps Standard length of the cable 0.5 m, 2x0.75 mm 2 QS075 Electrical connector enabling connection of the lamp to a 2x0.75 mm² diameter electrical installation QS150 Electrical connector enabling connection of the lamp to a 2x1.50 mm² diameter electrical installation FT-045 ZIEL LED FT-045 N LED Decorative LED lamp, green, 2x0.75mm² cable (0.5m). Decorative LED lamp, blue, 2x0.75 mm² cable (0.5 m). 1 0,06 1 0,06 Nonstandard length of the cable (QS075, QS150) on order. Lead time is individually determined. FT-045 PG T Rubber gasket (transparent) for FT-045 LED mounted at grille saver bull bars, bumper guards and body armors. 10 0,22 42 Clearance lamps Clearance lamps 43

24 FT-140 LED LED clearance 3-functional LED clearance 3-functional FT-140 LED FT-140 F LED FT-140 A L LED functional LED side marker, left, short straight rubber bracket, 2x0.75 mm² cable 0.5 m long. 1 0, x39x29 19, x80x ,00 FT-140 A L LED functional LED side marker, left, short straight rubber bracket, 2x0.75 mm² cable 0.5m long with QS075 connector. 1 0, x39x29 26, x80x ,00 FT-140 A L LED functional LED side marker, left, short straight rubber bracket, 2x0.75 mm² cable 0.5m long with QS150 connector. 1 0, x39x29 26, x80x ,00 FT-140 A P LED functional LED side marker, right, short straight rubber bracket, 2x0.75 mm² cable 0.5 m long. 1 0, x39x29 19, x80x ,00 FT-140 A P LED functional LED side marker, right, short straight rubber bracket, 2x0.75 mm² cable 0.5m long with QS075 connector. 1 0, x39x29 26, x80x ,00 3-functional universal LED clearance lamp with the rubber bracket and removable opitacal module low power consumption - white clearance light - red clearance light - yellow clearance light FT-140 A P LED FT-140 F L LED FT-140 F L LED FT-140 F L LED functional LED side marker, right, short straight rubber bracket, 2x0.75 mm² cable 0.5m long with QS150 connector. 3-functional LED side marker, left, long, slanted rubber arm, 2x0.75 mm² cable 0.5 m long. 3-functional LED side marker, left, long, slanted rubber arm, 2x0.75 mm² cable 0.5m long with QS075 connector. 3-functional LED side marker, left, long, slanted rubber arm, 2x0.75 mm² cable 0.5m long with QS150 connector. 1 0, x39x29 26, x80x ,00 1 0, x39x29 17, x80x ,00 1 0, x39x29 21, x80x ,00 1 0, x39x29 21, x80x ,00 Power consumption: - 12V/24V = 0,1A/0,1A - 12V/24V = 1,2W/2,4W FT-140 A LED FT-140 F P LED FT-140 F P LED functional LED side marker, right, long, slanted rubber arm, 2x0.75 mm² cable 0.5 m long. 3-functional LED side marker, right, long, slanted rubber arm, 2x0.75 mm² cable 0.5m long with QS075 connector. 1 0, x39x29 17, x80x ,00 1 0, x39x29 21, x80x ,00 FT-140 F P LED functional LED side marker, right, long, slanted rubber arm, 2x0.75 mm² cable 0.5m long with QS150 connector. 1 0, x39x29 21, x80x ,00 FT-140 W L LED functional LED side marker, left, short rubber arm (hanging version), 2x0.75 mm² cable 0.5 m long. 1 0, x39x29 25, x80x ,00 FT-140 W L LED functional LED side marker, left, short rubber arm (hanging version), 2x0.75 mm² cable 0.5m long with QS075 connector. 1 0, x39x29 33, x80x ,00 FT-140 W LED FT-140 W L LED functional LED side marker, left, short rubber arm (hanging version), 2x0.75 mm² cable 0.5m long with QS150 connector. 1 0, x39x29 33, x80x ,00 FT-140 W P LED functional LED side marker, right, short rubber arm (hanging version), 2x0.75 mm² cable 0.5 m long. 1 0, x39x29 25, x80x ,00 FT-140 W P LED functional LED side marker, right, short rubber arm (hanging version), 2x0.75 mm² cable 0.5m long with QS075 connector. 1 0, x39x29 33, x80x ,00 FT-140 W P LED functional LED side marker, right, short rubber arm (hanging version), 2x0.75 mm² cable 0.5m long with QS150 connector. 1 0, x39x29 33, x80x ,00 Omega holder is not included in the basic accessories of the lamp. 44 Clearance lamps Clearance lamps 45

25 FT-038 CB LED LED clearance 2-functional LED clearance 3-functional FT-038 LED FT-038 CB LED FT-038 CB I LED FT-038 CB II LED FT-038 LED FT-038 I LED FT-038 II LED 2-funtional LED clearance lamp low power consumption - white clearance light - red clearance light - 12V=0,04A/0,5W - 24V=0,04A/1W 3-functional universal LED clearanc lamp low power consumption - white clearance light - red clearance light - yellow clearance light - 12V=0,08A/1W - 24V=0,08A/2W FT-038 CB LED LED clearance lamp, bifunctional, with a sidelight (front and tail). 2 0, x39x29 18, x80x ,00 FT-038 LED LED clearance lamp, trifunctional, with a sidelight (front, tail and side), 0.5 m long cable. 2 0, x39x29 18, x80x ,00 FT-038 CB LED FT-038 CB LED FT-038 CB I LED clearance lamp, bifunctional, with a sidelight (front and tail) and a cable with a QS075 connector. LED clearance lamp, bifunctional, with a sidelight (front and tail) and a cable with a QS150 connector. LED clearance lamp, bifunctional, with a sidelight (front and tail), on an extended straight bracket. 2 0, x39x29 25, x80x ,00 2 0, x39x29 25, x80x ,00 2 0, x39x29 15, x80x ,00 FT-038 LED FT-038 LED FT-038 I LED LED clearance lamp, trifunctional with a sidelight (front, tail and side), 0.5 m long cable with a QS075 type. LED clearance lamp, trifunctional with a sidelight (front, side and tail), 0.5 m long cable with a QS150 connector. LED clearance lamp, trifunctional with a sidelight (front, side and tail), on an extended straight bracket, 0.5 m long cable. 2 0, x39x29 25, x80x ,00 2 0, x39x29 25, x80x ,00 2 0, x39x29 15, x80x ,00 FT-038 CB I LED FT-038 CB I LED FT-038 CB II LED FT-038 CB II LED FT-038 CB II LED Omega holder is not included in the basic accessories of the lamp. LED clearance lamp, bifunctional, with a sidelight (front and tail), on an extended straight bracket, cable with a QS075 connector. LED clearance lamp, bifunctional, with a sidelight (front and tail), on an extended straight bracket, 0.5 m cable with a QS150 connector. LED clearance lamp, bifunctional, with a sidelight (front and tail), on an angle bracket. LED clearance lamp, bifunctional, with a sidelight (front and tail), on an angle bracket, cable with a QS075 connector. LED clearance lamp, bifunctional, with a sidelight (front and tail), on an angle bracket, cable with a QS150 connector. 2 0, x39x29 20, x80x ,00 2 0, x39x29 20, x80x ,00 2 0, x39x29 15, x80x ,00 2 0, x39x29 20, x80x ,00 2 0, x39x29 20, x80x ,00 FT-038 I LED FT-038 I LED FT-038 II LED FT-038 II LED FT-038 II LED Omega holder is not included in the basic accessories of the lamp. LED clearance lamp, trifunctional with a sidelight (front, side and tail), on an extended straight bracket, 0.5 m long cable with a QS075 connector. LED clearance lamp, trifunctional with a sidelight (front, side and tail), on an extended straight bracket, 0.5 m long cable with a QS150 connector. LED clearance lamp, trifunctional with a sidelight (front, side and tail), on an angle bracket, 0.5 m long cable. LED clearance lamp, trifunctional with a sidelight (front, side and tail), on an angle bracket, 0.5 m long cable with a QS075 connector. LED clearance lamp, trifunctional with a sidelight (front, side and tail), on an angle bracket, 0.5 m long cable with a QS150 connector. 2 0, x39x29 20, x80x ,00 2 0, x39x29 20, x80x ,00 2 0, x39x29 20, x80x ,00 2 0, x39x29 15, x80x ,00 2 0, x39x29 15, x80x ,00 46 Clearance lamps Clearance lamps 47

26 FT-027 LED LED clearance lamp LED clearance lamp FT-017 LED 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - white or yellow clearance light: 12V= 0,04A/0,5W/24V=0,04A/1W - red clearance light: 12V=0,03A/0,4W/24V=0,03A/0,8W 1-functional LED clearance lamp - integrated 2x0.75 mm 2 cable - clearance light - white or yellow clearance light: 12V= 0,04A/0,5W/24V=0,04A/1W - red clearance light: 12V=0,03A/0,4W/24V=0,03A/0,8W opening exit of cable harness loaaed with rectangular wrapping FT-017 B LED , x39x29 20, x80x ,00 FT-027 B LED , x39x29 14, x80x ,00 FT-017 B LED , x39x29 19, x80x ,00 FT-027 B LED , x39x29 14, x80x ,00 FT-017 B LED , x39x29 19, x80x ,00 FT-027 B LED , x39x29 14, x80x ,00 FT-017 Z LED , x39x29 20, x80x ,00 FT-027 Z LED , x39x29 14, x80x ,00 FT-017 Z LED , x39x29 19, x80x ,00 FT-027 Z LED , x39x29 14, x80x ,00 FT-017 Z LED , x39x29 19, x80x ,00 FT-027 Z LED , x39x29 14, x80x ,00 FT-017 C LED , x39x29 20, x80x ,00 FT-027 C LED , x39x29 14, x80x ,00 FT-017 C LED , x39x29 19, x80x ,00 FT-027 C LED , x39x29 14, x80x ,00 FT-017 C LED , x39x29 19, x80x ,00 FT-027 C LED , x39x29 14, x80x ,00 KAT FT-017/FT Angle holder for FT-017 / FT-018 clearance lamps. Both sides mounting possibility. 10 0,20 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 48 Clearance lamps Clearance lamps 49

27 FT-017 K LED LED clearance lamp LED clearance lamp FT-018 LED opening exit of cable harness loaaed with rectangular wrapping 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - white or yellow clearance light: 12V= 0,04A/0,5W/24V=0,04A/1W - red clearance light: 12V=0,03A/0,4W/24V=0,03A/0,8W 1- functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - white or yellow clearance light 12V= 0,04A/0,5W/24V=0,04A/1W - red clearance light 12V=0,03A/0,4W/24V=0,03A/0,8W FT-017 B+K LED FT-017 B+K LED FT-017 B+K LED with an angle holder and a cable. with an angle holder, cable with an angle holder, cable 10 0, x39x29 21, x80x , , x39x29 23, x80x , , x39x29 23, x80x ,00 FT-018 B LED FT-018 B LED FT-018 B LED FT-018 Z LED , x39x29 20, x80x , , x39x29 19, x80x , , x39x29 19, x80x , , x39x29 20, x80x ,00 FT-017 Z+K LED FT-017 Z+K LED FT-017 Z+K LED with an angle holder and a cable. with an angle holder, cable with an angle holder, cable 10 0, x39x29 21, x80x , , x39x29 23, x80x , , x39x29 23, x80x ,00 FT-018 Z LED FT-018 Z LED FT-018 C LED , x39x29 19, x80x , , x39x29 19, x80x , , x39x29 20, x80x ,00 FT-017 C+K LED with an angle holder and a cable. 10 0, x39x29 21, x80x ,00 FT-018 C LED , x39x29 19, x80x ,00 FT-017 C+K LED with an angle holder, cable 10 0, x39x29 23, x80x ,00 FT-018 C LED , x39x29 19, x80x ,00 FT-017 C+K LED with an angle holder, cable 10 0, x39x29 23, x80x ,00 KAT FT-017/FT Angle holder for FT-017 / FT-018 clearance lamps. Both sides mounting possibility. 10 0,20 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 50 Clearance lamps Clearance lamps 51

28 FT-019 LED LED clearance lamp LED clearance lamp FT-019 K LED 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - white or yellow clearance light 12V= 0,04A/0,5W/24V=0,04A/1W - red clearance light 12V=0,03A/0,4W/24V=0,03A/0,8W 2x0.75 mm2 cable l=500 mm 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - white or yellow clearance light 12V= 0,04A/0,5W/24V=0,04A/1W - red clearance light 12V=0,03A/0,4W/24V=0,03A/0,8W FT-019 B LED FT-019 B LED FT-019 B LED FT-019 Z LED , x39x29 15, x80x , , x39x29 14, x80x , , x39x29 14, x80x , , x39x29 15, x80x ,00 FT-019 B+K LED FT-019 B+K LED FT-019 B+K LED with an angle holder and a cable. 10 0, x39x29 19, x80x , , x39x29 20, x80x , , x39x29 20, x80x ,00 FT-019 Z LED FT-019 Z LED FT-019 C LED , x39x29 14, x80x , , x39x29 14, x80x , , x39x29 15, x80x ,00 FT-019 Z+K LED FT-019 Z+K LED FT-019 Z+K LED with an angle holder and a cable. 10 0, x39x29 19, x80x , , x39x29 20, x80x , , x39x29 20, x80x ,00 FT-019 C LED , x39x29 14, x80x ,00 FT-019 C+K LED , x39x29 19, x80x ,00 FT-019 C LED , x39x29 14, x80x ,00 FT-019 C+K LED , x39x29 20, x80x ,00 KAT FT Angle handle for FT-19 clearance lamps. 10 0,20 FT-019 C+K LED , x39x29 20, x80x ,00 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 52 Clearance lamps Clearance lamps 53

29 FT-020 LED LED clearance lamp LED clearance lamp FT-020 K LED 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - white or yellow clearance light 12V= 0,04A/0,5W/24V=0,04A/1W - red clearance light 12V=0,03A/0,4W/24V=0,03A/0,8W 2x0.75 mm2 cable l=500 mm 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - white or yellow clearance light 12V= 0,04A/0,5W/24V=0,04A/1W - red clearance light 12V=0,03A/0,4W/24V=0,03A/0,8W FT-020 B LED FT-020 B LED FT-020 B LED FT-020 Z LED , x39x29 19, x80x , , x39x29 21, x80x , , x39x29 21, x80x , , x39x29 19, x80x ,00 FT-020 B+K LED FT-020 B+K LED FT-020 B+K LED with an angle holder and a cable. 10 0, x39x29 21, x80x , , x39x29 22, x80x , , x39x29 22, x80x ,00 FT-020 Z LED FT-020 Z LED FT-020 C LED , x39x29 21, x80x , , x39x29 21, x80x , , x39x29 19, x80x ,00 FT-020 Z+K LED FT-020 Z+K LED FT-020 Z+K LED with an angle holder and a cable. 10 0, x39x29 21, x80x , , x39x29 22, x80x , , x39x29 22, x80x ,00 FT-020 C LED , x39x29 21, x80x ,00 FT-020 C+K LED , x39x29 21, x80x ,00 FT-020 C LED , x39x29 21, x80x ,00 FT-020 C+K LED , x39x29 22, x80x ,00 KAT FT Angle handle for FT-020 clearance lamps. 10 0,20 FT-020 C+K LED , x39x29 22, x80x ,00 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 54 Clearance lamps Clearance lamps 55

30 FT-012 LED LED clearance lamp LED clearance lamp FT-012 K LED ø5,5 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W otwór montażowy fixing hole FT-012 B LED FT-012 B LED FT-012 B LED FT-012 Z LED FT-012 Z LED FT-012 Z LED , x39x29 18, x80x , , x39x29 20, x80x , , x39x29 20, x80x , , x39x29 18, x80x , , x39x29 20, x80x , , x39x29 20, x80x ,20 FT-012 B+K LED FT-012 B+K LED FT-012 B+K LED FT-012 Z+K LED FT-012 Z+K LED FT-012 Z+K LED with an angle holder and a cable. with an angle holder and a cable. 10 0, x39x29 18, x80x , , x39x29 20, x80x , , x39x29 20, x80x , , x39x29 18, x80x , , x39x29 20, x80x , , x39x29 20, x80x ,20 FT-012 C LED , x39x29 18, x80x ,20 FT-012 C+K LED , x39x29 18, x80x ,20 FT-012 C LED , x39x29 20, x80x ,20 FT-012 C+K LED , x39x29 20, x80x ,20 FT-012 C LED , x39x29 20, x80x ,20 FT-012 C+K LED , x39x29 20, x80x ,20 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 56 Clearance lamps Clearance lamps 57

31 FT-015 LED LED clearance und decorative lamps LED clearance lamp FT-015 K LED carriage cutout 83 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable In a standard version the lamps are applied to be mounted on the flat surfaces using the black rubber. Optionaly the installation at the grille saver bull bars, bumper guards and body armors may be carried out by using a transparent or black FT-015 PGC/T rubber gaskets that are not included in the standard version of the product. - red, white or yellow clearance light - blue or green decorative light with rubber profiled matching the pipe Ø clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W 14, , FT-015 B LED FT-015 B LED FT-015 B LED FT-015 Z LED FT-015 Z LED FT-015 Z LED FT-015 C LED FT-015 C LED FT-015 C LED FT-015 N LED FT-015 N LED FT-015 N LED FT-015 ZIEL LED FT-015 ZIEL LED 10 0, x39x29 20, x80x , , x39x29 23, x80x , , x39x29 23, x80x , , x39x29 20, x80x ,00 Decorative LED lamp, blue, 2x0.75 mm² cable (0.5 m). Decorative LED lamp, blue, 2x0.75 mm² cable (0.5 m) and QS075 connector. Decorative LED lamp, blue, 2x0.75 mm² cable (0.5 m) and QS150 connector. Decorative LED lamp, green, 2x0.75 mm² cable (0.5 m). Decorative LED lamp, green, 2x0.75 mm² cable (0.5 m) and QS075 connector. 10 0, x39x29 23, x80x , , x39x29 23, x80x , , x39x29 20, x80x , , x39x29 23, x80x , , x39x29 23, x80x , , x39x29 20, x80x , , x39x29 23, x80x , , x39x29 23, x80x , , x39x29 20, x80x , , x39x29 23, x80x ,00 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light FT-015 B+K LED FT-015 B+K LED FT-015 B+K LED FT-015 Z+K LED FT-015 Z+K LED FT-015 Z+K LED clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W with an angle holder and a cable. with an angle holder and a cable. 10 0, x39x29 21, x80x , , x39x29 23, x80x , , x39x29 23, x80x , , x39x29 21, x80x , , x39x29 23, x80x , , x39x29 23, x80x ,00 FT-015 ZIEL LED FT-015 PG C FT-015 PG T FT-015 PG T PL Omega holder is not included in the basic accessories of the lamp. Decorative LED lamp, green, 2x0.75 mm² cable (0.5 m) and QS150 connector. Rubber black gasket for mounting FT-015 LED clearance lamps on tube grill guards and bull bars. Rubber transparent gasket for mounting FT-015 LED clearance lamps on tube grill guards and bull bars. Rubber gasket (transparent) for FT-045 LED to be mounted at grille saver bull bars, bumper guards and body armors. 10 0, x39x29 23, x80x , , , ,008 FT-015 C LED FT-015 C LED FT-015 C LED Omega holder is not included in the basic accessories of the lamp. 10 0, x39x29 21, x80x , , x39x29 23, x80x , , x39x29 23, x80x ,00 58 Clearance lamps Clearance lamps 59

32 FT-013 LED LED clearance lamp LED clearance lamp FT-013 K LED 80 ø4, functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light Power consumption / Rated power - clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W ø5, FT-013 B LED FT-013 B LED FT-013 B LED FT-013 Z LED FT-013 Z LED FT-013 Z LED , x39x29 19, x80x , , x39x29 21, x80x , , x39x29 21, x80x , , x39x29 19, x80x , , x39x29 21, x80x , , x39x29 21, x80x ,00 FT-013 B+K LED FT-013 B+K LED FT-013 B+K LED FT-013 Z+K LED FT-013 Z+K LED FT-013 Z+K LED with an angle holder and a cable. with an angle holder and a cable. 10 0, x39x29 22, x80x , , x39x29 24, x80x , , x39x29 24, x80x , , x39x29 22, x80x , , x39x29 24, x80x , , x39x29 24, x80x ,20 FT-013 C LED , x39x29 19, x80x ,00 FT-013 C+K LED , x39x29 22, x80x ,20 FT-013 C LED , x39x29 21, x80x ,00 FT-013 C+K LED , x39x29 24, x80x ,20 FT-013 C LED , x39x29 21, x80x ,00 FT-013 C+K LED , x39x29 24, x80x ,20 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 60 Clearance lamps Clearance lamps 61

33 MD-013 LED LED clearance lamp LED clearance lamp MD-013 K LED ,5 45 Ø23 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - yellow or red clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W - white clearance light: 12V=0,04A/0,5W/24V=0,04A/1W 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - yellow or red clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W - white clearance light: 12V=0,04A/0,5W/24V=0,04A/1W MD-013 B LED , x39x29 25, x80x ,00 MD-013 B LED MD-013 B LED MD-013 Z LED , x39x29 24, x80x , , x39x29 24, x80x , , x39x29 25, x80x ,00 MD-013 B+K LED MD-013 B+K LED MD-013 B+K LED with an angle holder and a cable. 10 0, x39x29 15, x80x , , x39x29 17, x80x , , x39x29 17, x80x ,00 MD-013 Z LED MD-013 Z LED , x39x29 24, x80x , , x39x29 24, x80x ,00 MD-013 Z+K LED MD-013 Z+K LED with an angle holder and a cable. 10 0, x39x29 15, x80x , , x39x29 17, x80x ,00 MD-013 C LED , x39x29 25, x80x ,00 MD-013 Z+K LED , x39x29 17, x80x ,00 MD-013 C LED , x39x29 24, x80x ,00 MD-013 C+K LED , x39x29 15, x80x ,00 MD-013 C LED , x39x29 24, x80x ,00 MD-013 C+K LED , x39x29 17, x80x ,00 KAT MD Angle handle for MD-013 lamps. 10 0,20 MD-013 C+K LED , x39x29 17, x80x ,00 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 62 Clearance lamps Clearance lamps 63

34 FT-004 LED LED clearance lamp LED clearance lamp FT-004 K LED ø functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light 1-functional Clearance marker LED lamp low power consumption - ehock-resistance PC lampshade - integrated 2x0.75 mm 2 cable - clearance light - yellow or red clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W - white clearance light: 12V=0,04A/0,5W/24V=0,04A/1W - yellow or red clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W - white clearance light: 12V=0,04A/0,5W/24V=0,04A/1W ø23 9, FT-004 B LED FT-004 B LED FT-004 B LED FT-004 Z LED , x39x29 21, x80x , , x39x29 23, x80x , , x39x29 23, x80x , , x39x29 21, x80x ,00 FT-004 B+K LED FT-004 B+K LED FT-004 B+K LED with an angle holder and a cable. 10 0, x39x29 17, x80x , , x39x29 18, x80x , , x39x29 18, x80x ,00 FT-004 Z LED FT-004 Z LED FT-004 C LED , x39x29 23, x80x , , x39x29 23, x80x , , x39x29 21, x80x ,00 FT-004 Z+K LED FT-004 Z+K LED FT-004 Z+K LED with an angle holder and a cable. 10 0, x39x29 17, x80x , , x39x29 18, x80x , , x39x29 18, x80x ,00 FT-004 C LED , x39x29 23, x80x ,00 FT-004 C+K LED , x39x29 17, x80x ,00 FT-004 C LED , x39x29 23, x80x ,00 FT-004 C+K LED , x39x29 18, x80x ,00 KAT FT Angle handle for FT-004 lamps. 10 0,20 FT-004 C+K LED , x39x29 18, x80x ,00 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 64 Clearance lamps Clearance lamps 65

35 FT-009 LED LED clearance lamp LED clearance lamp FT-009 LED FT-009 C LED FT-009 F LED 2-functional LED clearance lamp mounted with the rubber bracket and removable opitacal module - integrated 2x0.75 mm 2 cable - white clearance light - red clearance light Power consumption: - 12V/24V = 0,04A/0,04A - 12V/24V = 0,5W/1W FT-009 E LED FT-009 A LED LED clearance marker lamp on a short straight rubber bracket 2 0, x39x29 25, x80x ,00 FT-009 A LED FT-009 A LED FT-009 B LED FT-009 B LED LED clearance marker lamp on a short straight rubber bracket with a cable LED clearance marker lamp on a short straight rubber bracket with a cable LED clearance marker lamp on a long straight rubber bracket LED clearance marker lamp on a long straight rubber bracket with a cable 2 0, x39x29 28, x80x ,00 2 0, x39x29 28, x80x ,00 2 0, x39x29 28, x80x ,00 2 0, x39x29 30, x80x ,00 2-functional clearance LED clearance lamp mounted with the rubber bracket and removable opitacal module - integrated 2x0.75 mm 2 cable - white clearance light - red clearance light Power consumption: - 12V/24V = 0,04A/0,04A - 12V/24V = 0,5W/1W FT-009 B LED FT-009 C LED FT-009 C LED FT-009 C LED LED clearance marker lamp on a long straight rubber bracket with a cable LED clearance marker lamp on a short slanting rubber bracket LED clearance marker lamp on a short slanting rubber bracket with a cable LED clearance marker lamp on a short slanting rubber bracket with a cable 2 0, x39x29 30, x80x ,00 2 0, x39x29 24, x80x ,00 2 0, x39x29 26, x80x ,00 2 0, x39x29 26, x80x ,00 FT-009 E LED FT-009 E LED FT-009 E LED LED clearance marker lamp on a long slanting rubber bracket LED clearance marker lamp on a long slanting rubber bracket with a cable LED clearance marker lamp on a long slanting rubber bracket with a cable 2 0, x39x29 20, x80x ,00 2 0, x39x29 21, x80x ,00 2 0, x39x29 21, x80x ,00 FT-009 D LED LED clearance marker lamp on a short L-shaped rubber bracket 2 0, x39x29 24, x80x ,00 FT-009 F LED LED clearance marker lamp on a long L-shaped rubber bracket 2 0, x39x29 20, x80x ,00 FT-009 D LED LED clearance marker lamp on a short L-shaped rubber bracket with a cable 2 0, x39x29 26, x80x ,00 FT-009 F LED LED clearance marker lamp on a long L-shaped rubber bracket with a cable 2 0, x39x29 21, x80x ,00 FT-009 D LED LED clearance marker lamp on a short L-shaped rubber bracket with a cable 2 0, x39x29 26, x80x ,00 FT-009 F LED LED clearance marker lamp on a long L-shaped rubber bracket with a cable 2 0, x39x29 21, x80x ,00 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 66 Clearance lamps Clearance lamps 67

36 FT-001 LED LED clearance lamp LED clearance lamp FT-001 LED FT-001 B LED with a reflector and a cable. 10 0, x39x29 22, x80x ,00 FT-001 B LED with a reflector, a cable 10 0, x39x29 24, x80x ,00 FT-001 B LED with a reflector, a cable 10 0, x39x29 24, x80x ,00 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light mounting openings for a metal-sheet screw or a screw with an ISO metric thread - yellow or red clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W - white clearance light: 12V=0,04A/0,5W/24V=0,04A/1W FT-001 B I LED FT-001 B I LED FT-001 B I LED FT-001 B II LED FT-001 B II LED with a reflector, an angle holder and a cable. with a reflector, an angle holder, a cable with a reflector, an angle holder, a cable with a reflector, a flat holder and a cable. with a reflector, a flat holder, a cable 10 0, x39x29 14, x80x , , x39x29 15, x80x , , x39x29 15, x80x , , x39x29 24, x80x , , x39x29 25, x80x ,00 FT-001 B II LED with a reflector, a flat holder, a cable 10 0, x39x29 25, x80x ,00 FT-001 B III LED with a reflector, short holder and a cable. 10 0, x39x29 24, x80x ,00 FT-001 B III LED with a reflector, a short holder, a cable 10 0, x39x29 25, x80x ,00 FT-001 B III LED with a reflector, a short holder, a cable 10 0, x39x29 25, x80x ,00 FT-001 B IV LED White clearance LED lamp with a reflector, a flat with an angle holder and a 2x0.75 mm² cable. 10 1, x39x29 13, x80x ,00 FT-001 B IV LED White clearance LED lamp with a reflector, a flat with an angle holder, QS075 connector. 10 1, x39x29 13, x80x ,00 FT-001 B IV LED White clearance LED lamp with a reflector, a flat with an angle holder, QS150 connector. 10 1, x39x29 13, x80x ,00 Omega holder is not included in the basic accessories of the lamp. 68 Clearance lamps Clearance lamps 69

37 FT-001 LED LED clearance lamp LED clearance lamp FT-001 LED FT-001 Z LED with a reflector and a cable. 10 0, x39x29 22, x80x ,00 FT-001 Z LED with a reflector, a cable 10 0, x39x29 24, x80x ,00 FT-001 Z LED with a reflector, a cable 10 0, x39x29 24, x80x ,00 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light mounting openings for a metal-sheet screw or a screw with an ISO metric thread - yellow or red clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W - white clearance light: 12V=0,04A/0,5W/24V=0,04A/1W FT-001 Z I LED FT-001 Z I LED FT-001 Z I LED FT-001 Z II LED FT-001 Z II LED with a reflector, an angle holder and a cable. with a reflector, an angle holder, a cable with a reflector, an angle holder, a cable with a reflector, a flat holder and a cable. with a reflector, a flat holder, a cable 10 0, x39x29 14, x80x , , x39x29 15, x80x , , x39x29 15, x80x , , x39x29 24, x80x , , x39x29 25, x80x ,00 FT-001 Z II LED with a reflector, a flat holder, a cable 10 0, x39x29 25, x80x ,00 FT-001 Z III LED with a reflector, short holder and a cable. 10 0, x39x29 24, x80x ,00 FT-001 Z III LED with a reflector, a short holder, a cable 10 0, x39x29 25, x80x ,00 FT-001 Z III LED with a reflector, a short holder, a cable 10 0, x39x29 25, x80x ,00 FT-001 Z IV LED Yellow clearance LED lamp with a reflector, a flat with an angle holder and a 2x0.75 mm² cable. 10 1, x39x29 13, x80x ,00 FT-001 Z IV LED Yellow clearance LED lamp with a reflector, a flat with an angle holder, QS075 connector. 10 1, x39x29 13, x80x ,00 FT-001 Z IV LED Omega holder is not included in the basic accessories of the lamp. Yellow clearance LED lamp with a reflector, a flat with an angle holder, QS150 connector. 10 1, x39x29 13, x80x ,00 70 Clearance lamps Clearance lamps 71

38 FT-001 LED LED clearance lamp LED clearance lamp FT-001 LED FT-001 C LED with a reflector and a cable. 10 0, x39x29 22, x80x ,00 FT-001 C LED with a reflector, a cable 10 0, x39x29 24, x80x ,00 FT-001 C LED with a reflector, a cable 10 0, x39x29 24, x80x ,00 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light mounting openings for a metal-sheet screw or a screw with an ISO metric thread - yellow or red clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W - white clearance light: 12V=0,04A/0,5W/24V=0,04A/1W FT-001 C I LED FT-001 C I LED FT-001 C I LED FT-001 C II LED FT-001 C II LED with a reflector, an angle holder and a cable. with a reflector, an angle holder, a cable with a reflector, an angle holder, a cable with a reflector, a flat holder and a cable. with a reflector, a flat holder, a cable 10 0, x39x29 14, x80x , , x39x29 15, x80x , , x39x29 15, x80x , , x39x29 24, x80x , , x39x29 25, x80x ,00 FT-001 C II LED with a reflector, a flat holder, a cable 10 0, x39x29 25, x80x ,00 FT-001 C III LED with a reflector, short holder and a cable. 10 0, x39x29 24, x80x ,00 FT-001 C III LED with a reflector, a short holder, a cable 10 0, x39x29 25, x80x ,00 FT-001 C III LED with a reflector, a short holder, a cable 10 0, x39x29 25, x80x ,00 FT-001 C IV LED Red clearance LED lamp with a reflector, a flat with an angle holder and a 2x0.75 mm² cable. 10 1, x39x29 13, x80x ,00 FT-001 C IV LED Red clearance LED lamp with a reflector, a flat with an angle holder, QS075 connector. 10 1, x39x29 13, x80x ,00 FT-001 C IV LED Red clearance LED lamp with a reflector, a flat with an angle holder, QS150 connector. 10 1, x39x29 13, x80x ,00 Omega holder is not included in the basic accessories of the lamp. 72 Clearance lamps Clearance lamps 73

39 FT-025 LED LED clearance lamp LED clearance fibre-optic lamp FT-029 LED 18 ø functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable 29 1-functional LED clearance lamp low power consumption - integrated 2x0.75 mm 2 cable - clearance light - yellow or red clearance light: 12V=0,02A/0,25W/24V=0,02A/0,5W - white clearance light: 12V=0,04A/0,5W/24V=0,04A/1W 34 - clearance light Power consumption: - clearance light 12V/24V = 0,08A/0,08A Power consumption (rated power): - clearance light 12V/24V = 1W/2W Ø4, FT-025 B LED , x39x29 17, x80x ,00 FT-029 B LED , x39x29 18, x80x ,00 FT-025 B LED , x39x29 20, x80x ,00 FT-029 B LED , x39x29 20, x80x ,00 FT-025 B LED , x39x29 20, x80x ,00 FT-029 B LED , x39x29 20, x80x ,00 FT-025 Z LED , x39x29 17, x80x ,00 FT-029 Z LED , x39x29 18, x80x ,00 FT-025 Z LED , x39x29 20, x80x ,00 FT-029 Z LED , x39x29 20, x80x ,00 FT-025 Z LED , x39x29 20, x80x ,00 FT-029 Z LED , x39x29 20, x80x ,00 FT-025 C LED , x39x29 17, x80x ,00 FT-029 C LED , x39x29 18, x80x ,00 FT-025 C LED , x39x29 20, x80x ,00 FT-029 C LED , x39x29 20, x80x ,00 FT-025 C LED , x39x29 20, x80x ,00 FT-029 C LED , x39x29 20, x80x ,00 Omega holder is not included in the basic accessories of the lamp. Omega holder is not included in the basic accessories of the lamp. 74 Clearance lamps Clearance lamps 75

40 FT-001 Clearance lamp Clearance lamp FT-001 FT-001 B White clearance lamp with a reflector. 10 0, x39x29 12, x80x ,00 FT-001 Z Yellow clearance lamp with a reflector. 10 0, x39x29 12, x80x ,00 FT-001 C Red clearance lamp with a reflector. 10 0, x39x29 12, x80x ,00 FT-001 B I White clearance lamp with an angle holder and a reflector. 10 0, x39x29 14, x80x ,00 FT-001 Z I Yellow clearance lamp with an angle holder and a reflector. 10 0, x39x29 14, x80x ,00 FT-001 C I Red clearance lamp with an angle holder and a reflector. 10 0, x39x29 14, x80x ,00 FT-001 B II White clearance lamp with a flat holder and a reflector. 10 0, x39x29 20, x80x ,60 mounting openings for a metal-sheet screw or a screw with an ISO metric thread FT-001 Z II FT-001 C II Yellow clearance lamp with a flat holder and a reflector. Red clearance lamp with a flat holder and a reflector. 10 0, x39x29 20, x80x , , x39x29 20, x80x ,60 FT-001 B III White clearance lamp with a short holder and a reflector. 10 0, x39x29 18, x80x ,20 FT-001 Z III Yellow clearance lamp with a short holder and a reflector. 10 0, x39x29 18, x80x ,20 FT-001 C III Red clearance lamp with a short holder and a reflector. 10 0, x39x29 18, x80x ,20 FT-001 B IV White clearance LED lamp with a reflector and a flat with an angle holder. 10 0, x39x29 12, x80x ,00 FT-001 Z IV Yellow clearance LED lamp with a reflector and a flat with an angle holder. 10 0, x39x29 12, x80x ,00 FT-001 C IV Red clearance LED lamp with a reflector and a flat with an angle holder. 10 0, x39x29 12, x80x ,00 FT-001 K B/Z/C Lampshade FT-001 B/Z/C Clearance lamps Clearance lamps 77

41 FT-005 Clearance lamp Clearance lamp FT-005 FT-005 B White clearance lamp. 10 0, x39x29 13, x80x ,00 FT-005 Z Yellow clearance lamp. 10 0, x39x29 13, x80x ,00 FT-005 C Red clearance lamp. 10 0, x39x29 13, x80x ,00 FT-005 B I White clearance lamp with an angle holder. 10 0, x39x29 14, x80x ,00 FT-005 Z I Yellow clearance lamp with an angle holder. 10 0, x39x29 14, x80x ,00 FT-005 C I Red clearance lamp with an angle holder. 10 0, x39x29 14, x80x ,00 FT-005 B II White clearance lamp with a flat holder. 10 0, x39x29 20, x80x ,60 mounting openings for a metal-sheet screw or a screw with an ISO metric thread FT-005 Z II FT-005 C II Yellow clearance lamp with a flat holder. Red clearance lamp with a flat holder. 10 0, x39x29 20, x80x , , x39x29 20, x80x ,60 FT-005 B III White clearance lamp with a short holder. 10 0, x39x29 18, x80x ,20 FT-005 Z III Yellow clearance lamp with a short holder. 10 0, x39x29 18, x80x ,20 FT-005 C III Red clearance lamp with a short holder. 10 0, x39x29 18, x80x ,20 FT-005 B IV White clearance LED lamp with a reflector and a flat with an angle holder. 10 0, x39x29 12, x80x ,00 FT-005 Z IV Yellow clearance LED lamp with a reflector and a flat with an angle holder. 10 0, x39x29 12, x80x ,00 FT-005 C IV Red clearance LED lamp with a reflector and a flat with an angle holder. 10 0, x39x29 12, x80x ,00 FT-005 K B/Z/C Lampshade FT-005 B / Z / C Clearance lamps Clearance lamps 79

42 FT-033 Clearance lamp Clearance lamp MD-013 FT-033 C FT-033 E ø24 ø ø FT-033 A ø FT-033 C ø6.5 ø61 FT-033 E ø6.5 MD-013 B White clearance lamp with a bulb (W5W) and bulb holder. 10 0, x39x29 17, x80x , ø ø MD-013/1 B White clearance lamp with a bulb (W5W) and bulb holder, 2x0.75 mm 2 cable. 10 0, x39x29 19, x80x ,40 ø MD-013 Z Yellow clearance lamp with a bulb (W5W) and bulb holder. 10 0, x39x29 17, x80x ,00 FT-033 B ø6.5 FT-033 D 39 ø6.5 FT-033 F 39 ø6.5 MD-013/1 Z Yellow clearance lamp with a bulb (W5W) and bulb holder, 2x0.75 mm 2 cable. 10 0, x39x29 19, x80x ,40 MD-013 C Red clearance lamp with a bulb (W5W) and bulb holder. 10 0, x39x29 17, x80x ,00 FT-033 A Clearance marker bulb lamp (R5W), short straight rubber bracket, 2x0.75 mm² cable with 6/3 joints 2 0, x39x29 25, x80x ,00 MD-013/1 C Red clearance lamp with a bulb (W5W) and bulb holder, 2x0.75 mm 2 cable. 10 0, x39x29 19, x80x ,40 FT-033 B Clearance marker bulb lamp (R5W), long straight rubber bracket, 2x0.75 mm² cable with 6/3 joints 2 0, x39x29 28, x80x ,00 MD-013 B+K White clearance lamp with a bulb (W5W), bulb holder and an angle holder. 10 0, x39x29 12, x80x ,00 FT-033 C FT-033 D Clearance marker bulb lamp (R5W), short slanting rubber bracket, 2x0.75 mm² cable with 6/3 joints Clearance marker bulb lamp (R5W), L-shaped short rubber bracket, 2x0.75 mm² cable with 6/3 joints 2 0, x39x29 24, x80x ,00 2 0, x39x29 24, x80x ,00 MD-013 B+K/ MD-013 Z+K White clearance lamp with a bulb (W5W), bulb holder, 2x0.75 mm 2 cable, and an angle holder. Yellow clearance lamp with a bulb (W5W), bulb holder and an angle holder. 10 0, x39x29 13, x80x , , x39x29 12, x80x ,00 FT-033 E FT-033 F FT-033 KB FT-033 KC Clearance marker bulb lamp (R5W), long slanting rubber bracket, 2x0.75 mm² cable with 6/3 joints Clearance marker bulb lamp (R5W), L-shaped long rubber bracket, 2x0.75 mm² cable with 6/3 joints White lampshade FT-033. Red lampshade FT , x39x29 20, x80x ,00 2 0, x39x29 20, x80x ,00 MD-013 Z+K/ MD-013 C+K MD-013 C+K/ Yellow clearance lamp with a bulb (W5W), bulb holder, 2x0.75 mm 2 cable, and an angle holder. Red clearance lamp with a bulb (W5W), bulb holder and an angle holder. Red clearance lamp with a bulb (W5W), bulb holder, 2x0.75 mm 2 cable, and an angle holder. 10 0, x39x29 13, x80x , , x39x29 12, x80x , , x39x29 13, x80x ,00 80 Clearance lamps Clearance lamps 81

43 FT-004 Clearance lamp Clearance lamp FT-003 mounting openings for a metal-sheet screw or a screw with an ISO metric thread FT-003 B White clearance lamp (C5W bulb). 10 0, x39x29 7, x80x ,00 FT-004 B White clearance lamp with a bulb (W5W) and bulb holder. 10 0, x39x29 14, x80x ,00 FT-003 Z Yellow clearance lamp (C5W bulb). 10 0, x39x29 7, x80x ,00 FT-004/1 B FT-004 Z FT-004/1 Z White clearance lamp with a bulb (W5W), bulb holder and 2x0.75 mm 2 cable. Yellow clearance lamp with a bulb (W5W) and bulb holder. Yellow clearance lamp with a bulb (W5W), bulb holder and 2x0.75 mm 2 cable. 10 0, x39x29 16, x80x , , x39x29 14, x80x , , x39x29 16, x80x ,00 FT-003 C FT-003 K B/Z/C Clearance lamp Red clearance lamp (C5W bulb). Lampshade FT-003 B / Z / C , x39x29 7, x80x ,00 FT-003/1 FT-004 C Red clearance lamp with a bulb (W5W) and bulb holder. 10 0, x39x29 14, x80x ,00 FT-004/1 C Red clearance lamp with a bulb (W5W), bulb holder and 2x0.75 mm 2 cable. 10 0, x39x29 16, x80x ,00 FT-004 B+K White clearance lamp with a bulb (W5W), bulb holder and an angle holder. 10 0, x39x29 12, x80x ,80 mounting openings for a metal-sheet screw or a screw with an ISO metric thread FT-004 B+K / White clearance lamp with a bulb (W5W), bulb holder, 2x0.75 mm 2 cable and an angle holder. 10 0, x39x29 13, x80x ,20 FT-004 Z+K Yellow clearance lamp with a bulb (W5W), bulb holder and an angle holder. 10 0, x39x29 12, x80x ,80 FT-003/1 B White clearance lamp (R5W bulb). 10 0, x39x29 9, x80x ,00 FT-004 Z+K/ Yellow clearance lamp with a bulb (W5W), bulb holder, 2x0.75 mm 2 cable and an angle holder. 10 0, x39x29 13, x80x ,20 FT-003/1Z Yellow clearance lamp (R5W bulb). 10 0, x39x29 9, x80x ,00 FT-004 C+K Red clearance lamp with a bulb (W5W), bulb holder and an angle holder. 10 0, x39x29 12, x80x ,80 FT-003/1 C Red clearance lamp (R5W bulb). 10 0, x39x29 9, x80x ,00 FT-004 C+K/ Red clearance lamp with a bulb (W5W), bulb holder, 2x0.75 mm 2 cable and an angle holder. 10 0, x39x29 13, x80x ,20 FT-003 K B/Z/C Lampshade FT-003 and FT-003/1 B / Z / C Clearance lamps Clearance lamps 83

44 FT-008 Clearance lamp Clearance lamp FT-024 mounting openings for a metal-sheet screw or a screw with an ISO metric thread mounting openings for a metal-sheet screw or a screw with an ISO metric thread FT-008 B White clearance lamp. 10 0, x39x29 10, x80x ,00 FT-008 Z Yellow clearance lamp. 10 0, x39x29 10, x80x ,00 FT-008 C FT-008 K B/Z/C FT-006 Red clearance lamp. 10 0, x39x29 10, x80x ,00 Lampshade FT-008 B / Z / C. 10 Clearance lamp Ø Ø10 FT White and red clearance lamp. 10 0, x39x29 13, x80x ,00 mounting hole FT-024 I White and red clearance lamp with an angle holder. 10 0, x39x29 13, x80x ,00 FT-006 B White clearance lamp. 10 0, x39x29 14, x80x ,00 FT-024 II White and red clearance lamp with a flat holder. 10 0, x39x29 13, x80x ,00 FT-006 Z Yellow clearance lamp. 10 0, x39x29 14, x80x ,00 FT-024 III White and red clearance lamp with a short holder. 10 0, x39x29 13, x80x ,00 FT-006 C Red clearance lamp. 10 0, x39x29 14, x80x ,00 FT-024 IV White and red clearance lamp with angle holder. 10 0, x39x29 12, x80x ,00 FT-006 K B/Z/C Lampshade FT-006 B / Z / C. 10 FT-024 K Lampshade FT Clearance lamps Clearance lamps 85

45 FT-010 Clearance lamp Clearance lamp FT-011 FT-011 B White clearance lamp, 2x0.75 mm 2 cable. 10 0, x39x29 12, x80x ,40 FT-011 Z Yellow clearance lamp, 2x0.75 mm 2 cable. 10 0, x39x29 12, x80x ,40 FT-011 C Red clearance lamp, 2x0.75 mm 2 cable. 10 0, x39x29 12, x80x ,40 FT-011 B/ White clearance lamp with a flat holder, 2x0.75 mm 2 cable. 10 0, x39x29 12, x80x ,60 FT-011 Z/ Yellow clearance lamp with a flat holder, 2x0.75 mm 2 cable. 10 0, x39x29 12, x80x ,60 FT-011 C/ Red clearance lamp with a flat holder, 2x0.75 mm 2 cable. 10 0, x39x29 12, x80x ,60 FT Black and white clearance lamp, 2x0.75 mm 2 cable. 10 0, x39x29 12, x80x ,40 FT-011 K B/Z/C Lampshade FT-011 B / Z / C. 10 FT Red and white clearance lamp, 2x0.75 mm 2 cable , x39x29 12, x80x ,40 Clearance lamp FTP-171 FT Black and red clearance lamp, 2x0.75 mm 2 cable , x39x29 12, x80x ,40 FT-010/ Black and white clearance lamp with a flat holder, 2x0.75 mm 2 cable. 10 0, x39x29 13, x80x ,80 FT-010/ Red and white clearance lamp with a flat holder, 2x0.75 mm 2 cable. 10 0, x39x29 13, x80x ,80 FT-010/ Black and red clearance lamp with a flat holder, 2x0.75 mm 2 cable. 10 0, x39x29 13, x80x ,80 cable outlet hole for fitting with size 3,5 metal sheet screws FT K Lampshade FT (black and white). 10 0,14 FT K Lampshade FT (white and red). 10 0,14 FTP-171 B Clearance lamp, white. 10 0, x39x29 14, x80x ,00 FT K Lampshade FT (red and black). 10 0,14 FTP-171 C Clearance lamp, red. 10 0, x39x29 14, x80x ,00 86 Clearance lamps Clearance lamps 87

46 FTP-146 Clearance lamp Clearance lamp FTP-174 Very popular clearance lamp (yellow) with dimensions of 43 x 58 mm, very commonly used in many types of vehicles. It has a simple, reliable design and universal mounting. Very popular clearance lamp (white) with dimensions of 43 x 58 mm, very commonly used in many types of vehicles. It has a simple, reliable design and universal mounting. Application: trucks: Star, Jelcz, Robur, Kamaz, IFA, trailers and semitrailers, self-propelled construction and agriculture machines. Application: trucks: Star, Jelcz, Robur, Kamaz, IFA, trailers and semitrailers, self-propelled construction and agriculture machines. FTP Clearance lamp, yellow (bulb C5W not included). 10 0, x39x29 20, x80x ,00 FTP Clearance lamp, white (bulb C5W not included). 10 0, x39x29 20, x80x ,00 FTP-146 I Clearance lamp, yellow with a rubber, angle bracket (bulb C5W not included). 10 0, x39x29 14, x80x ,00 FTP-174 I Clearance lamp, white with a rubber, angle bracket (bulb C5W not included). 10 0, x39x29 14, x80x ,00 FTP-164 Clearance lamp Very popular clearance lamp (red) with dimensions of 43 x 58 mm, very commonly used in many types of vehicles. It has a simple, reliable design and universal mounting. Application: trucks: Star, Jelcz, Robur, Kamaz, IFA, trailers and semitrailers, self-propelled construction and agriculture machines. cable outlet FTP Clearance lamp, red (bulb C5W not included). 10 0, x39x29 20, x80x ,00 FTP-164 I Clearance lamp, red with a rubber, angle bracket (bulb C5W not included). 10 0, x39x29 14, x80x ,00 88 Clearance lamps Clearance lamps 89

47 FTP-048 Front clearance lamp openings in the carriage to fix A great series of the clearance lamps that perfectly mark the vehicle dimensions : rear and front. Due to application, the vehicle becomes perfectly visible for the rest road users. The clearance lamps FTP-048 B and FTP-048 C give the vehicle more distinctive presence. FTP-048 B FTP-048 C Front clearance lamp, white. 1 0,13 Front clearance lamp, red. 1 0,13 REVERSING LAMPS FTP-151 C/152 B Front clearance lamp carriage fixing cable outlet The clearance lights: front and rear are mounted on the foreside of the vehicle and it increase its safet. FTP-151 C Front clearance lamp, red. 2 0, x39x29 16, x80x ,00 FTP-152 B Front clearance lamp, white. 2 0, x39x29 16, x80x ,00 90 Clearance lamps Clearance lamps 91

48 FT-112 LED LED reversing lamp LED reversing lamp FT-036 REV LED 2-functional universal LED reversing lamp low power consumption - reverse polarity protection system - rear running light - reversing light Power consumption: - running light: 12V/24V = 0,1A/0,1A - reversing light: 12V/24V = 0,2A/0,2A - running light: 12V/24V = 1,2W/2,4W - reversing light: 12V/24V = 2,5W/5W 1-functional universal LED reversing lamp low power consumption - integrated 2x0.75 mm 2 cable - reversing light Power consumption: - reversing light: 12V/24V = 0,28A/0,14A - reversing light: 12V/24V = 3,5W/3,5W cable outlet RELATED PRODUCTS: FT-110 LED p. 22 FT-111 LED p necessary plug space reversing ground rear position reference FT-112 LED Universal LED reversing lamp 12 / 24V, round with position light and 1.0 m wiring loom. 1 0, x39x29 20, x80x ,00 FT-036 REV LED Universal LED reversing lamp with a joint handle (black housing). 1 0, x39x29 27, x80x ,00 FT-112 LED BAJONET Universal LED reversing lamp 12 / 24V, round with position light and 5 PIN bayonet connector. 1 0, x39x29 16, x80x ,00 Uchwyt OMEGA «OMEGA» mounting holder of galvanized metal sheet (FT-036 lamps). 10 0,60 92 Reversing lamps Reversing lamps 93

49 FT-124 LED LED reversing lamp cable outlet Reversing lamp MD-040 cable outlet RELATED PRODUCTS: FT-120 LED, FT-121 LED, FT-122 LED p. 24 FT-123 LED p. 99 fog ground fog rear position groundreference rear position reference necessary plug space necessary plug space version with screws 2-functional Universal LED reversing lamp low power consumption - reverse polarity protection system - rear running light - reversing light Power consumption: - running light: 12V/24V = 0,06A/0,06A - reversing light: 12V/24V = 0,2A/0,1A - running light: 12V/24V = 0,75W/1,5W - reversing light: 12V/24V = 2,5W/2,5W version with a joint handle MD-040 S Reversing lamp mounted with 2 M5 screws. 1 0, x39x29 16, x80x ,00 FT-124 LED Universal LED 2-functional rear reversing lamp 12/ 24V, round with a 1 m wiring loom. 1 0, x39x29 28, x80x ,60 MD-040 P Reversing lamp mounted with a joint handle. 1 0, x39x29 19, x80x ,00 FT-124 LED BAJONET Universal LED 2-functional rear reversing lamp 12/ 24V, round with 5 PIN bayonet connector. 1 0, x39x29 22, x80x ,60 MD-040 K Lampshade MD FT-041 LED LED reversing lamp Reversing lamp FT-056 RELATED PRODUCTS: FT-032 LED p. 29 FT-040 LED p functional universal LED reversing lamp low power consumption - reversing light Power consumption: - reversing light: 12V/24V=0,12A/0,06A - reversing light: 12V/24V = 1,5W/1,5W FT-056 S Reversing lamp mounted with 2 M5 screws. 1 0, x39x29 10, x80x ,60 FT-041 LED LED reversing lamp with a 2x0.75 mm² cable. 1 0, x39x29 15, x80x ,00 FT-056 P Reversing lamp with mounted with a joint. 1 0, x39x29 13, x80x ,00 FT-041 LED LED reversing lamp with a 2x0.75 mm² cable 1 0, x39x29 19, x80x ,00 FT-056 K Lampshade FT Omega holder is not included in the basic accessories of the lamp. 94 Reversing lamps Reversing lamps 95

50 DOB-051 Reversing lamp FOG LAMPS version with screws version with a joint handle DOB-051 P BP Reversing lamp mounted with a joint (without cable). 1 0, x39x29 14, x80x ,00 DOB-051 P ZP Reversing lamp mounted with a joint (with a cable). 1 0, x39x29 14, x80x ,00 DOB-051 S BP Reversing lamp mounted with 2 M5 screws (without cable). 1 0, x39x29 12, x80x ,00 DOB-051 S ZP Reversing lamp mounted with 2 M5 screws (with a cable). 1 0, x39x29 12, x80x ,00 DOB-051 K Lampshade DOB Reversing lamps

51 FT-111 LED LED fog lamp LED fog lamp FT-123 LED 2-functional universal LED fog lamp low power consumption - reverse polarity protection system cable outlet - rear running light - fog light RELATED PRODUCTS: FT-120 LED, FT-121 LED, FT-121 LED p. 24 FT-124 LED p. 94 fog ground rear position reference necessary plug space Power consumption: - running light: 12V/24V = 0,1A/0,1A - fog light: 12V/24V = 0,25A/0,25A - running light: 12V/24V = 1,2W/2,4W - fog light: 12V/24V = 3W/6W 2-functional universal LED fog lamp low power consumption - reverse polarity protection system - reverse running light - fog light Power consumption: - running light: 12V/24V = 0,06A/0,06A - fog light: 12V/24V = 0,16A/0,08A - running light: 12V/24V = 0,75W/1,5W - fog light: 12V/24V = 2W/2W cable outlet RELATED PRODUCTS: FT-110 LED p. 28 FT-112 LED p. 92 FT-123 LED FT-123 LED BAJONET Universal LED 2-functional rear fog lamp 12/ 24V with 1 m wiring loom. Universal LED 2-functional rear fog lamp 12/ 24V, with a 5 PIN bayonet connector. 1 0, x39x29 28, x80x ,60 1 0, x39x29 22, x80x ,60 LED fog lamp FT-040 LED necessary plug space fog ground rear position reference RELATED PRODUCTS: FT-032 LED p. 29 FT-041 LED p functional LED fog lamp low power consumption - fog light Power consumption: - fog light: 12V/24V = 0,2A/0,1A - fog light: 12V/24V = 2,5W/2,5W FT-111 LED Universal LED fog lamp 12 / 24V, round with position light and 1.0 m wiring loom. 1 0, x39x29 20, x80x ,00 FT-040 LED LED fog lamp with a 2x0.75 mm² cable. 1 0, x39x29 18, x80x ,00 FT-111 LED BAJONET Universal LED fog lamp 12 / 24V, round with position light and 5 PIN bayonet connector. 1 0, x39x29 16, x80x ,00 FT-040 LED LED fog lamp with a 2x0.75 mm² cable 1 0, x39x29 19, x80x ,00 Omega holder is not included in the basic accessories of the lamp. 98 Fog lamps Fog lamps 99

52 DOB-050 Fog lamp Fog lamp FT-055 FT-055 S Fog lamp mounted with 2 M5 screws. 1 0, x39x29 10, x80x ,60 FT-055 P Fog lamp mounted with a joint. 1 0, x39x29 13, x80x ,00 FT-055 K Lampshade FT Fog lamp MD-035 version with screws version with a joint handle ID Photo Description DOB-050 P BP Fog lamp mounted with a joint (without a cable). 1 0, x39x29 14, x80x ,00 version with screws version with a joint handle DOB-050 P ZP Fog lamp mounted with a joint (with a cable). 1 0, x39x29 14, x80x ,00 ID Photo Description DOB-050 S BP Fog lamp mounted with 2 M5 screws (without a cable). 1 0, x39x29 12, x80x ,00 MD-035 S Fog lamp mounted with 2 M5 screws. 1 0, x39x29 16, x80x ,00 DOB-050 S ZP Fog lamp mounted with 2 M5 screws (with a cable). 1 0, x39x29 12, x80x ,00 MD-035 P Fog lamp mounted with a joint. 1 0, x39x29 16, x80x ,00 DOB-050 K Lampshade DOB MD-035 K Lampshade MD Fog lamps Fog lamps 101

53 Number plate LED lamp FT-026 LED NUMBER PLATE LIGHT 1-functional number plate LED lamp low power consumption - license number plate light Power consumption: - license plate light: 12V/24V = 0,08A/0,08A - license plate light: 12V/24V = 1W/2W FT-026 LED FT-026 LED Number plate LED lamp without cable. Number plate LED lamp 1 0, x39x29 16, x80x ,00 1 0, x39x29 22, x80x ,00 FT-026 LED Number plate LED lamp * Custom product lead time will be determined and provided by phone or in writing. 1 0, x39x29 22, x80x , Number plate light Number plate light 103

54 FT-016 LED Number plate LED lamp Number plate LED lamp FT-016 A LED 1-functional number plate LED lamp low power consumption - number plate light Power consumption: - number plate light: 12V/24V = 0,02A/0,02A - number plate light: 2V/24V = 0,25W/0,5W 2-functional number plate LED lamp low power consumption - reversing rear light - number plate light Power consumption: - 12V/24V=0,06A/0,06A - 12V/24V=0,75W/1,5W FT-016 LED Number plate LED lamp 2 0, x39x29 26, x80x ,00 FT-016/A LED Number plate LED lamp 2 0, x39x29 26, x80x ,00 FT-016 LED Number plate LED lamp 2 0, x39x29 30, x80x ,00 FT-016/A LED Number plate LED lamp 2 0, x39x29 30, x80x ,00 FT-016 LED Number plate LED lamp 2 0, x39x29 30, x80x ,00 FT-016/A LED Number plate LED lamp 2 0, x39x29 30, x80x ,00 FT-016/1 LED Number plate LED lamp 2 0, x39x29 22, x80x ,00 FT-016/1/A LED Number plate LED lamp 2 0, x39x29 22, x80x ,00 FT-016/1 LED Number plate LED lamp 2 0, x39x29 25, x80x ,00 FT-016/1/A LED Number plate LED lamp 2 0, x39x29 25, x80x ,00 FT-016/1 LED Number plate LED lamp 2 0, x39x29 25, x80x ,00 FT-016/1/A LED Number plate LED lamp 2 0, x39x29 25, x80x ,00 * Custom product lead time will be determined and provided by phone or in writing. * Custom product lead time will be determined and provided by phone or in writing. 104 Number plate light Number plate light 105

55 FT-031 LED Number plate LED lamp Number plate LED lamp FT-031 A LED 1-functional number plate LED lamp low power consumption - license number plate light Power consumption: - number plate light: 12V/24V = 0,04A/0,04A - number plate light: 2V/24V = 0,5W/1W 2-functional number plate LED lamp low power consumption - reversing rear light - number plate light Power consumption: -12V/24V=0,06A/0,06A -12V/24V=0,75W/1,5W FT-031 LED Number plate LED lamp without cable. 1 0, x39x29 15, x80x ,80 FT-031 A LED Number plate LED lamp with a sidelight without cable. 1 0, x39x29 15, x80x ,80 FT-031 LED Number plate LED lamp with a 0.5 m long wiring loom 1 0, x39x29 18, x80x ,00 FT-031 A LED Number plate LED lamp with a sidelight, a 0.5 m long wiring loom 1 0, x39x29 18, x80x ,00 FT-031 LED Number plate LED lamp with a 0.5 m long wiring loom 1 0, x39x29 18, x80x ,00 FT-031 A LED Number plate LED lamp with a sidelight, a 0.5 m long wiring loom 1 0, x39x29 18, x80x , Number plate light Number plate light 107

56 FT-022 Number plate lamp Number plate lamp MD M MD-021 Number plate lamp. 2 0, x39x29 20, x80x ,00 MD-021/A Number plate lamp with a sidelight. 2 0, x39x29 30, x80x ,0 FT Number plate lamp. 2 0, x39x29 20, x80x ,00 MD-021/1 Number plate lamp with a higher base. 2 0, x39x29 16, x80x ,00 FT-022/A Number plate lamp with a sidelight. 2 0, x39x29 30, x80x ,00 MD-021/1/A Number plate lamp with a higher base and a sidelight. 2 0, x39x29 24, x80x ,00 FT-022/ Number plate lamp with a higher base. 2 0, x39x29 16, x80x ,00 Number plate lamp FT-037 FT-022/1/A Number plate lamp with a higher base and a sidelight. 2 0, x39x29 24, x80x ,00 FTP-158 Number plate lamp Number plate lights FTP-158 of 402 x 48 mm, 3 C5W bulbs for trailers, semi-trailers, light commercial vehicles and agricultural and building machinery. FT Number plate lamp. 2 0, x39x29 19, x80x ,00 - FTP-158 number plate lamp without sidelight The lamp is equipped with wiring. In the standard version there are no bulbs included. FT-037/ Number plate lamp with a sidelight. 2 0, x39x29 19, x80x ,00 FT-037/P Number plate lamp with a 2x0.75 mm² cable. 2 0, x39x29 23, x80x ,00 FTP Number plate lamp, length 402 mm, black housing with internal wiring (standard version without 3 bulbs C5W). 1 0,36 59x39x29 120x80x165 FT-037/1/P Number plate lamp with a sidelight and a 2x0.75 mm² cable. 2 0, x39x29 23, x80x , Number plate light Number plate light 109

57 Interior lighting LED lamp FT-034 LED INTERIOR LIGHTING Universal interior lighting LED lamp appearas in five color versions: white, blue, yellow, red and green. - power consumption; white,blue and green 12V/24V = 0,3A/0,15A - power consumption (rated power) white,blue and green 12V/24V=3,6W/3,6W - power consumption;yellow and red 12V/24V = 0,22A/0,11A - power consumption (rated power); yellow and red 12V/24V = 3,6 W/3,6W 29 Ø4, FT-034 B LED Universal interior lighting LED lamp (white light). 1 0, x39x29 18, x80x ,00 FT-034 N LED Universal interior lighting LED lamp (blue light). 1 0, x39x29 18, x80x ,00 FT-034 Z LED Universal interior lighting LED lamp (yellow light). 1 0, x39x29 18, x80x ,00 FT-034 C LED Universal interior lighting LED lamp (red light). 1 0, x39x29 18, x80x ,00 FT-034 ZIEL LED Universal interior lighting LED lamp (green light). 1 0, x39x29 18, x80x , Interior lighting Interior lighting 111

58 FT-044 LED Interior lighting LED lamp Interior lighting LED lamp FT-043 LED Series of modern interior LED type lamps in a square version has become widely used in energy-saving electrical installations and also in the widely understood automotive industry and households. The main features of this lamp include: low power consumption thereby maintaining light efficiency comparable with 20W halogen bulb; supply possibility with DC voltage and AC voltage i.e. the possibility to supply with 230W AC voltage via a transformer. Due to its small size; shock resistance and easy installation but also due to its waterproofness the lamp is very appreciated in motorboat industry. The lamps are equipped with removable frame type housings. Standard version includes lamps with white, silver and gold frames. There is also a possibility to realize special orders for any housing color. Series of modern interior LED type lamps in a round version has become widely used in energy-saving electrical installations and also in the widely understood automotive industry and households. The main features of this lamp include: low power consumption thereby maintaining light efficiency comparable with 20W halogen bulb; supply possibility with DC voltage and AC voltage i.e. the possibility to supply with 230W AC voltage via a transformer. Due to its small size; shock resistance and easy installation but also due to its waterproofness the lamp is very appreciated in motorboat industry. The lamps are eqquiped with removable frame type housings. Standard version includes lamps with white, silver and gold frames. There is also a possibility to realize special orders for any housing color. - supply voltage: 12-36V (DC or AC) - power consumption 9V/36V = 0,28A/0,08A - power consumption (rated power) 9V/36V = 2,6W - light flux: equivalent of the standard 12V-20V bulb - color temperature: white/warm, 3500K (Kelvin) - full waterproofness (IP68) schock and vibration resistance (IK03) - the product meets legal requirements of the EU and it is marked by CE - supply voltage: 12-36V (DC or AC) - power consumption 9V/36V = 0,28A/0,08A - power consumption (rated power) 9V/36V = 2,6W - light flux: equivalent of the standard 12V-20V bulb - color temperature: white/warm, 3500K (Kelvin) - full waterproofness (IP68) schock and vibration resistance (IK03) - the product meets legal requirements of the EU and it is marked by CE FT-044 B LED LED interior lamp, square with replaceable frame, white color. 1 0, x39x29 20, x80x ,00 FT-043 B LED LED interior lamp, round with replaceable frame, white color. 1 0, x39x29 18, x80x ,20 FT-044 S LED LED interior lamp, square with replaceable frame, silver color. 1 0, x39x29 20, x80x ,00 FT-043 S LED LED interior lamp, round with replaceable frame, silver color. 1 0, x39x29 18, x80x ,20 FT-044 ZL LED LED interior lamp, square with replaceable frame, gold color. 1 0, x39x29 20, x80x ,00 FT-043 ZL LED LED interior lamp, round with replaceable frame, gold color. 1 0, x39x29 18, x80x , Interior lighting Interior lighting 113

59 FTP-131 FTP-131 Interior lighting lamp Interior lighting lamp FTP-095 x 6 Interior lamp 12V or 24V with a pushbutton switch (in a basic version without bulbs). Tubular C10W 12V or C10W 24V bulbs (2 pcs./ lamp) also available upon request. Application: trucks: Star, Jelcz, Robur, Kamaz, Liaz, Ifa; buses Jelcz, Autosan, vans Lublin I, II, III. Width: 125 mm Height: 41 mm Standard interior lamp 24V, white, mounted on 2 screws with spacing of 180 mm. Bulbs (3xC5W) are not included in the standard lamp version. The lamp is equpped with set of electrical cables. Length: 226 mm Width: 32 mm mounting hole mounting hole FTP Interior lamp, white casing, 12 / 24V with a button switch (in basic version without bulbs). Tubular C10W 12V / C10W 24V bulbs (2 pcs. / lamp). 1 0, x39x29 12, x80x ,00 FTP Interior lamp, 24V, white, mounted on 2 screws with spacing of 180 mm. Bulbs (3xC5W) are not included. 1 0, x39x29 17, x80x ,00 FTP-143 FTP-143 Interior lighting lamp Interior lighting lamp FTP-102 Interior lamp 12V or 24V with a pushbutton switch (in basic version without bulbs). Product in 2 casing colour versions: white and black. Tubular C5W 12V or C5W 24V bulbs (2 pcs./ lamp) also available upon request. Application: trucks: Star, Jelcz, Robur, Kamaz, Liaz, Ifa, vans Lublin I, II, III, Żuk, Nysa, Polonez Truck, cars: Fiat 125P, 126P, Polonez. Boot luggage compartment lamp. 2 product versions (12V or 24V) available upon request (bulb C5W). The standard version is not equipped with bulbs. Width: 135 mm Height: 16 mm Application: motor cars: Polonez Caro, Atu, Atu Plus Width: 74 mm Heigh: 5 mm FTP-102 B Interior lamp, white casing, 12 / 24V with a pushbutton switch (in basic version without bulbs). Tubular C5W 12V / C5W 24V bulbs (2 pcs. / lamp). 1 0, x39x29 17, x80x ,00 FTP Trunk lamp, white, 12V or 24V (C5W bulb not included). 10 0, x39x29 13, x80x ,00 FTP-102 CZ Interior lamp, black casing, 12 / 24V with a pushbutton switch (in basic version without bulbs). Tubular C5W 12V / C5W 24V bulbs (2 pcs. / lamp). 1 0, x39x29 17, x80x , Interior lighting Interior lighting 115

60 Side indicator lamp FTP-051 fixing holes cable outlet The traditional side indicator FTP-051 and a lampshade for buses Autosan, Jelcz. Product dimension: 70x140x50 mm. Bulb R10W is not included in standard version. INDICATORS FTP FTP-051 K Yellow side indicator lamp. 1 0,14 Yellow lampshade FTP ,07 Side indicator lamp FTP-175/176 Application: Trucks: MAN, Scania, Volvo, Renault, Star, Jelcz, Robur, Kamaz, Liaz, IFA FTP-175 P Yellow side indicator lamp, right. 1 0,14 FTP-176 L Yellow side indicator lamp, left. 1 0,14 KIERUNKOWSKAZY FTP-175 K P FTP-176 K L Lampshade, right FTP ,07 Lampshade, left FTP , Indicators Indicators 117

61 DOB-040 Indicator lamp Indicator lamp MD-010 MD-010 DOB-040 Z DOB-040 B Yellow indicator lamp, front (DAF-F95, DAF, MAN, STAR 742, 1142) with a bulb holder. White indicator lamp, front (DAF-F95, DAF, MAN, STAR 742, 1142) with a bulb holder. 1 0,21 1 0,21 MD-010 Z MD-010 Z/K Yellow indicator lamp. 1 0, x39x29 19, x80x ,00 Yellow lampshade MD , x39x29 11, x80x ,40 FTP-045 Side indicator lamp FTP Yellow side indicator lamp. 1 0,15 FTP-045 K Yellow lampshade FTP , Indicators Indicators 119

62 Reflector DOB-030A REFLECTORS ID Photo Description DOB-030A Triangular reflector with screws. 2 0, x39x29 12, x80x ,00 Reflector DOB-031 ID Photo Description DOB-031 Triangular reflector with 2 mounting holes. 2 0, x39x29 27, x80x , Reflectors Reflectors 121

63 DOB-034 Rectangular reflector Round reflector DOB-039 ID Photo Description ID Photo Description DOB-034 B White rectangular reflector with 2 mounting holes. 10 0, x39x29 42, x80x ,00 DOB-039A B White round reflector on a backing with a screw. 10 0,07 DOB-034 Z Yellow rectangular reflector with 2 mounting holes. 10 0, x39x29 42, x80x ,00 DOB-039A Z Yellow round reflector on a backing with a screw. 10 0,07 DOB-034 C DOB-035 Red rectangular reflector with 2 mounting holes. 10 0, x39x29 42, x80x ,00 Rectangular reflector DOB-039A C DOB-039 B DOB-039 Z Red round reflector on a backing with a screw. White round reflector mounted with 2 screws. Yellow round reflector mounted with 2 screws. 10 0, , ,37 DOB-039 C Red round reflector mounted with 2 screws. 10 0,37 self-adhesive tape Round reflector DOB-032 ID Photo Description DOB-035 B White rectangular reflector mounted with adhesive tape. 10 0, x39x29 50, x80x ,00 self-adhesive tape DOB-035 Z Yellow rectangular reflector mounted with adhesive tape. 10 0, x39x29 50, x80x ,00 ID Photo Description DOB-035 C Red rectangular reflector mounted with adhesive tape. 10 0, x39x29 50, x80x ,00 DOB-032 B White round reflector mounted with adhesive tape. 10 0,15 FT-46x26 Ornamental reflector DOB-032 Z DOB-032 C Yellow round reflector mounted with adhesive tape. Red round reflector mounted with adhesive tape. 10 0, ,15 Round reflector DOB-033 self-adhesive tape ID Photo Description FT-46x26 B FT-46x26 Z White decorative and rectangular reflector mounted with adhesive tape. Yellow decorative and rectangular reflector mounted with adhesive tape. 20 0, ,10 ID Photo Description DOB-033 B DOB-033 Z White round reflector with a mounting hole. Yellow round reflector with a mounting hole. 10 0, ,14 FT-46x26 C Red decorative and rectangular reflector mounted with adhesive tape. 20 0,10 DOB-033 C Red round reflector with a mounting hole. 10 0, Reflectors Reflectors 123

64 DOB-42 Rectangular reflector 70 ID Photo Description DOB-42 B White rectangular reflector 94x44 mm with 2 mounting holes. 10 0,23 DOB-42 Z Yellow rectangular reflector 94x44 mm with 2 mounting holes. 10 0,23 DOB-42 C Red rectangular reflector 94x44 mm with 2 mounting holes. 10 0,23 ACCESSORIES DOB-42A B White rectangular reflector 94x44 mm with 2 mounting holes, mounted with adhesive tape. 10 0,23 DOB-42A Z Yellow rectangular reflector 94x44 mm with 2 mounting holes, mounted with adhesive tape. 10 0,23 DOB-42A C Red rectangular reflector 94x44 mm with 2 mounting holes, mounted with adhesive tape. 10 0,23 DOB-43 Rectangular reflector self-adhesive tape ID Photo Description DOB-43 B Withe rectangular reflector 94x44 mm, mounted with adhesive tape. 10 0,24 DOB-43 Z Yellow rectangular reflector 94x44 mm, mounted with adhesive tape. 10 0,24 DOB-43 C Red rectangular reflector 94x44 mm, mounted with adhesive tape. 10 0, Reflectors Reflectors 125

65 LED CONTROL BOX Accessories OPR FT Side lamp bulb holder FT LED CONTROL BOX V OPR FT-004/ FT-004/1 side lamp bulb holder with a wiring loom. 10 cable lenght 0.5 m 13 PIN SOCKET (trailer) OPR MD MD-013 side lamp bulb holder. 10 OPR MD-013/ MD-013/1 side lamp bulb holder with a wiring loom (airtight). 10 cable lenght 2.5 m OPR R10W R10W bulbholder with a wiring loom. 10 OPR W5W ZS W5W all-glass bulb holder with contacts and a wiring loom (small). 10 0,07 cable lenght 0.5 m LED CONTROL BOX 7 12 V 7 PIN SOCKET (trailer) 13 PIN PLUG (vehicle) OPR W5W ZS WTY MD W5W all-glass bulb holder with contacts and a wiring loom (big). 10 0,08 MD-013 lamp bulbholder plug. 10 0,08 QS075 z przewodem 2x0,75 Connector for a 2x0.75 mm² cable (fast assembly); Available cable lengths: M05=0.5 m; M10=1 m; M15=1.5 m. 10 0,50 cable lenght 2.5 m QS150 z przewodem 2x0,75 Connector for a 2x1.5 mm² cable (fast assembly); Available cable lengths: M05=0.5 m; M10=1 m; M15=1.5 m. 10 0,50 QS075/QS Electrical connector, QS075<->QS075 adapter. 10 0,15 LED CONTROL BOX 12 V QS075/QS Electrical connector, QS075<->QS150 adapter. 10 0,18 7 PIN PLUG (vehicle) QS150/QS Electrical connector, QS150<->QS150 adapter. 10 0,21 cable length 2.5 m CEGI QS STYK FT-010 / FT Steel (nickel plated) self locking multi grip pliers for QS075 & QS150 connectors. FT-010 / FT-011 clearance lamp contact, pack of 100 pcs. 1 0, ,24 LU Cable connector universal Accessories Accessories 127

66 LGY 2x Rectangular 2x0.75 mm² cable. 100m 3,70 WTY 7PIN 7PIN plastic plug, 12V. 1 0,085 LGY 2x Rectangular 2x1.5 mm² cable. 100m 5,30 WTY GNIAZDO 7PIN 13PIN socket, 12V with a rubber gasket. 1 0,10 Uchwyt OMEGA OMEGA mounting holder of galvanized metal sheet (FT-036 lamps). 10 0,60 WTY 13PIN 13PIN plastic plug PA6, chrome pins, 12V. 1 0,085 Uchwyt OMEGA INOX OMEGA mounting holder of INOX metal sheet (FT-036 lamps). 10 0,45 WTY GNIAZDO 13PIN 13PIN socket, 12V with a rubber gasket. 1 0,10 MAG FT Magnetic base for FT-036 lamp with a rubber cover. 1 0,45 WTY ADAPTER 7PIN/ 13PIN Conversion adaptor, towing socket 7PIN ->13PIN. 1 0,08 KAT FT FT-004 clearance lamp angle holder. 10 0,20 WTY ADAPTER 13PIN/ 7PIN 25 cm 20 cm Conversion adapter, towing socket 13PIN ->7PIN. 1 0,08 KAT MD MD-013 clearance lamp angle holder. 10 0,20 KUWETA WARSZTATOWA FTP cm Storage bin, plastic, black, bulk pack (5 pcs.). T-joint fitting 1/2 to reduce the diameter of windshield washer hoses. 5 0,24 10 KAT FT-017/FT Universal angle holder (FT-017, FT-018). 10 0,25 FTP L-joint (elbow) fitting to output the windshield washer fluid at angle of KAT FT FT-019 clearance lamp angle holder. 10 0,20 FTP T-joint fitting 1/2 with the same inlet and outlet diameter of windshield washer hoses. 10 KAT FT WTY BAJONET L M FT-020 clearance lamp angle holder. Bayonet plug (5 PIN) with a 5x0.5 mm² cable, 1 m long, yellow. 10 0,20 1 0,017 FTP XXI 1 BAJ XXI 2 BAJ Linear fitting to reduce the diameter of windshield washer fluid tubes. Connecting cable for BAYONET lamps (1+1 option). Connecting cable for BAYONET lamps (2+1 option) ,11 1 0,14 WTY BAJONET P M Bayonet plug (5 PIN) with a 5x0.5 mm² cable, 1 m long, green. 1 0,017 XXI 3 BAJ Connecting cable for BAYONET lamps (3+1 option). 1 0,18 WTY AMP 7PIN M AMP plug (7 PIN) with a 6x0.75 mm² cable, 1 m long. 1 0,017 LED CONTROL BOX 7 12 V Electronic module supprting the proper action of the LED lighting systems, plug and socket 7PIN and 2.5 m cable. 1 0,90 WTY DS M Deutsch Stecker plug, 0.5 cable 1 0,022 LED CONTROL BOX V Electronic modulesupprting the proper action of the LED lighting systems, plug and socket 13PIN and 2.5 m cable. 1 1,05 KLIN SET Car wheel wedge with a mounting holder. 1 0,35 LED CONTROL BOX 12 V Electronic module supprting the proper action of the LED lighting systems, 2.5 isolated cable, self-assembly. 1 0, Accessories Accessories 129

67

68 132

69