2700 K, 3000 K, 3500 K, 4000 K, Static Red, Static Green, Static Blue, Static Amber FIXTURE WATTAGE (TOTAL WATTAGE)

Transcription

1 ITEM SPECIFICATION OPTICS BEAM ANGLES,,,, OUTPUT COLOR TEMPERATURES - TOTAL POWER CONSUMPTION (W/ft) - LUMENS - EFFICACY (lm/w) - CRI - MAX CANDELA (CD / m 2 ) (3.5W/ft fixture meets current ASHRAE requirements) LUMEN MAINTENANCE 2700 K, 3000 K, 3500 K, 4000 K, Static Red, Static Green, Static Blue, Static Amber FIXTURE WATTAGE (TOTAL WATTAGE) 6 (7.9 W/ft) 12 (16.4 W/ft) White: 75,000 hrs L70 WHITE LIGHT (4000K) (4 foot fixture) OPTICS LUMENS EFFICACY CRI MAX CANDELA ELECTRICAL INPUT VOLTAGE 120V to 277V - : Remote Power Supply lm/w 60 lm/w 61 lm/w 57 lm/w 79 lm/w 56 lm/w 50 lm/w 51 lm/w 48 lm/w 77 lm/w 54 lm/w 52 lm/w 53 lm/w 50 lm/w 70 lm/w 55 lm/w 50 lm/w 51 lm/w 48 lm/w CONTROL PHYSICAL DIMENSIONS (HEIGHT X WIDTH) HOUSING DMX Ready : X Aluminum extrusion with cast aluminum end caps, powder-coated finish OPTICS LENS OPERATING TEMPERATURE : Tempered glass -20 C to 40 C CERTIFICATION CERTIFICATION is ETL approved for wet locations. with remote power supply are ETL approved Class 1 WARRANTY 5 YEAR Limited All MEDLEY products are tested to IES LM-79, LM-80 and ANSI C78.377A standards X X X X X RoHS COMPLIANT 5 Year Limited Warranty SEE ORDERING INFORMATION ON PAGE 2 11/13/15 Page 1 of 7

2 PREFIX MX SERIES WATTAGE WATTS /FT COLOR TEMPS STATIC WHITE LIGHT 27K 30K 35K 40K 17 27K 30K 35K 40K STATIC COLORS R = Static Red G = Static Green B = Static Blue A = Static Amber 17 R = Static Red G = Static Green B = Static Blue A = Static Amber OPTICS ACTIVE WHITE (TUNABLE) 17 AWH = Color changing white light ranging from 27K, 40K, 50K # LIGHT DIRECTION U = Up D = Down MOUNTING S SINGLE FIXTURES CES = Close End SMS = Surface EAS6 = 6" Extended Arm EAS12 = 12" Extended Arm EAS18 = 18" Extended Arm PNS-X = Pendant 1 MULTIPLE FIXTURE RUNS EAM-X = Extended Arm 1 Multiple Fixture Run PNM-X = Pendant 1 Multiple Fixture Run FIXTURE LENGTH Single Fixtures 12" 24" 36" 48" WIRING METHOD STATIC WHITE & COLORS REM = Remote power supply Power suppy(s) must be ordered separately. See below. ACTIVE WHITE REM = Remote power supply RPS/100/DAT power suppy(s) must be ordered separately See below. CONTROLS FINISH S STATIC WHITE & COLOR DIMMING S NO = No dimming (must order RPS/96/PWR or RPW/100/PWR) DIM = 0-10V Dimming (must order RPS/96/DIM) DMXDIM = DMX Dimming (Power Supply Resolution. Must order RPS/100/RGB) Dimming controls are required. Contact factory. ACTIVE WHITE CONTROL S DMXFX = DMX Fixture Resolution DMXSY = DMX System Resolution Active White requires a DMX controller for proper mixing. Must order separately. See below for required programming kit. TW White TBL Black TBR Bronze TN Natural TS Sandstone CC = Custom Color # # Contact factory, additional charges will apply LV = Louver CRF = Corrosion Resistant Finish CRF is a multi-step coating process for additional protection in coastal environments Contact factory for Insight's Wireless Option # ACTIVE WHITE LIGHT NOTES: 1) ALL COLOR CHANGING PRODUCTS REQUIRE A DMX CONTROLLER FOR PROPER MIXING. MUST ORDER SEPARATELY. 2) ALL COLOR CHANGING PRODUCTS REQUIRE ONE LPT DMX PROGRAMMING TOOL FOR FIELD RE-ADDRESSING OF FACTORY DMX SETTINGS. SEE BELOW. STEP 2 REMOTE RPS POWER SUPPLIES, WET LOCATION - MUST ORDER SEPARATELY CATALOG NUMBER DESCRIPTION WHITE LIGHT & STATIC COLORS (NON-DIMMING) RPS/96/PWR/WET (1)-96W POWER SUPPLY (120V-277V), WET LOCATION RPS/100/PWR/WET (1)-100W POWER SUPPLY (120V-277V), WET LOCATION 0-10V DIMMING POWER SUPPLIES (0-10V) RPS/96/DIM/WET (1)-96W 0-10V DIMMING POWER SUPPLY ( V), WET LOCATION DMX DIMMING POWER SUPPLIES RPS/100/RGB/WET (1)-100W RGB POWER SUPPLY ( V), WET LOCATION (FOR DMX DIMMING) ACTIVE WHITE LIGHT (TUNABLE) RPS/100/DAT/WET (1)-100W POWER/DATA SUPPLY (120V - 277V) FOR ACTIVE WHITE LIGHT (TUNABLE), WET LOCATION NOTE: Due to remote power supply application variances, it is recommended to load the RPS Power Supplies at 80% of the wattage capacity. For specific and case by case requirements, please contact factory for assistance. ORDERING EXAMPLE: RPS / 100 / PWR / WET DMX DISTRIBUTION & PROGRAMMING KIT - REQUIRED FOR ALL COLOR CHANGING AND ACTIVE WHITE LIGHT INSTALLATIONS CATALOG NUMBER DESCRIPTION LPT DMX PROGRAMMING TOOL One LPT is required for field re-addressing of factory DMX settings. CDS-A DMX DISTRIBUTION KIT ONLY (3 OUTPUTS) CDS-A consists of three outputs. Each output accommodates up to 32 fixtures in INT/REM wiring methods and unlimted fixtures in ACV wiring method. Four terminators are included for use as required. For installation guidelines, please refer to the CDS DMX Splitter specification sheet: /pdfs/specs/cds%20spec%20sheet.pdf 11/13/15 Page 2 of 7

3 CES - CLOSE END, SUPPLY CES with Remote Power Supply Front View " 4' Input Lead Top View CES with Integral Power Supply Mounting Bracket Detail 1-1/4" 2 Places 2X 1/4-20 Fasteners By Others 1-1/2" Fixture Length 12" 24" 36" 48" 15-1/8" 27-1/8" 39-1/8" 51-1/8" 14-1/8" 26-1/8" 38-1/8" 50-1/8" 1/2" SMS - SURFACE MOUNT Front View " 4' Input Lead Max. Min. Top View Mounting Bracket Detail 9/16" 1-3/4" 1-1/8" Fixture Length 12" 24" 36" 48" 15-1/8" 27-1/8" 39-1/8" 51-1/8" Min. / Max. 6" / 9" 6" / 21" 12" / 33" 24" / 45" 5/16" 3/4" 1/4" Slot 2X 1/4-20 Fasteners By Others 11/13/15 Page 3 of 7

4 EAS & EAM - EXTENDED ARM ( SUPPLY) Specify 6", 12", 18" EAS & EAM Side View EAS Front View EAS Top View EAM Front View EAM Top View Fixture Length 12" 24" 36" 48" 15-1/8" 27-1/8" 39-1/8" 51-1/8" 15-7/8" 27-7/8" 39-7/8" 51-7/8" CANOPY S - EXTENDED ARM STANDARD 5" Round High Profile Cat#: RHP5 4-1/2" Square Cat#: SHP4.5 EAS, EAM standard canopies are a 5" round, high profile canopy and painted to match fixture. Standard canopies are provided unless otherwise specified. Optional 4-1/2" Square canopy is painted to match fixture. 11/13/15 Page 4 of 7

5 PNS & PNM - PENDANT ( SUPPLY) Specify 9" - 48" PNS FRONT VIEW PNM FRONT VIEW Fixture 12" 24" 36" 48" Length 15-1/8" 27-1/8" 39-1/8" 51-1/8" 16-3/16" 28-3/16" 40-3/16" 52-3/16" CANOPY S - PENDANT STANDARD 5" Round Low Profile Cat#: RLP5 4" Round Low Profile Cat#: RLP4 5" Round High Profile Cat#: RHP5 4-1/2" Square Cat#: SHP4.5 PNS, PNM standard canopies are a 5" round, low profile canopy and painted semi-gloss white. Standard canopies are provided unless otherwise specified. Optional canopies are painted semi-gloss white. 11/13/15 Page 5 of 7

6 EXTERIOR DIGITAL POWER SUPPLIES SUPPLIES EXTERIOR SUPPLY S FOR BASIC ELECTRICAL WIRING METHODS WET LOCATION RPS96 POWER SUPPLY RPS-96-PWR RPS-96-DIM 12" 12-3/8" - (1)-96W Power Supply for static white & static colors - (1)-96W Dimming Power Supply (0-10V Dimming for static white & static colors) NOT RATED FOR PLENUM INSTALLATIONS 1-1/2" RPS100 POWER SUPPLY 10" RPS-100-PWR - (1)-100W Power Supply for static white - RPS-100 is conduit ready (3/4" conduit by others) - Contact factory for cable ready versions 10" NOT RATED FOR PLENUM INSTALLATIONS 6" RPS-100-DAT - (1)-100W Data/Power Supply for Active White Light - RPS-100 is conduit ready Flying lead: 1/2" conduit by others Cable ready: 1" conduit by others NOT RATED FOR PLENUM INSTALLATIONS 11/13/15 Page 6 of 7

7 STATIC WHITE & DIMMING MEDLEY X STATIC WHITE LIGHT & DIMMING WIRING DIAGRAMS WHITE LIGHT - SUPPLY RPS PWR (RPS DIM) Lead (no connector) (Optional dimmer by others) Contact factory for additional wiring options. RPS PWR (RPS DIM) (Optional dimmer by others) Lead (no connector) 11/13/15 Page 7 of 7