FLEXIBLE HEATED HOSES

Size: px

Start display at page:

Download "FLEXIBLE HEATED HOSES"

Anna Chandler
5 years ago
Views:

1 FLEXIBLE HEATED HOSES TYPE ELH UP TO 350 C AND EX FOR HAZARDOUS ZONES The ideal solution that eltrace offers to the transportation of liquids and gases. Long life, high resistance to temperature uniform distribution of heat and the use of high quality materials guarantee high effectiveness and optimum use. Protection against freezing Protection against condensate forming. Maintain liquid and gas temperatures Maintain temperature of viscous products. Transport of liquids or gases between fixed and mobile installations (robot equipment) Hot bonding systems Projection of expanded polyurethane Wax transformation Analytical gas measurements Asphalt transformation installations Transformation of agro-food products Transfer of road tankers TAILOR-MODE CONSTRUCTION: Models are according to standard panel units and technical data sheets or to special specifications. Hydraulic connectors: Connector model: bichromate steel, stainless steel, brass. see table of accessories. Operating temperature range: from 5 to 350 C Pressure load limit: Flexible line length: Temperature sensor: External protection casing: Connecting cable: Connection cables: Connection plug: Temperature regulator: o D (without pressure) m D (medium pressure) h D (high pressure) variable, from 30 m for two heating circuits. PT 100-2,3 or 4 wires, thermocouples. stainless steel braid, nylon, galvanized steel, ribbed metal flexible with PVC casing 1 m standard, other lengths on order heating circuit, control circuit and temperature sensor combined or separate. round multi-pole 2200 VA connector, as an or any other design required by customer. see regulation technical leaflet.

2 FLEXIBLES CHAUFFANTS CONSTRUCTION: PTFE internal flexible line for the transport of liquids and gases. Armature consisting of one or two stainless steel braids guaranteeing pressure resistance. Hydraulic connectors mounted at ends of flexible line manufactured of very high quality material. Heat element wound around PTFE tube to ensure heating and temperature maintenance. The computer calculates the length and resistance. Interconnecting cables between the two ends of the flexible line for information (temperature) and power transfer. Thermal insulation adapted to operating temperatures and conditions. External braid for mechanical protection. Special assembly to prevent subsequent removal. Flexible line ends provided with silicon rubber protection fittings to ensure technically clean termination. Temperature sensor ( PT100, thermocouple, ) connected to electronic regulator maintaining transported product temperature, even for outside temperature variations. The flexible heating line meets the current standards. SUITABLE FOR HAZARDOUS AREAS Heating flexible lines and conduits are necessary in areas where there is an explosion hazard, coming under individual site inspection, or at eltrace production locations. The composition of the heated flexible line, resisting explosion, differs from the standard heating flexible line through the use of components approved by the European laboratories, such as heated cables, self-regulated heating tape, junction boxes, regulators, etc. ELTRACE can equip and supply all standard models, special flexible lines, stainless steel or copper tubes with a heating and control system approved for use in hazardous zones. Heating, in general, is by a heating cable conforming to European standards, heating tape with PTFE covered elements or self-regulating heated tape. The corresponding control certificates are included with the equipment. Because this equipment is manufactured to order only, our "project managers" are available to our customers for any information or special studies. FOR THE APPLICATION OF EXPANDED POLYURETHANE Double flexible heating line for two-part flexible projection with two PTFE tubes, one resisting pressure and one for compressed air. Nominal diameter: 2 x 6mm to 2 x 13mm. Maximum operation temperature: 80 C FOR THE ANALYSIS TECHNIQUE PTFE heating flexible line bundles Several PTFE tubes can be provided with heating, with the assembly isolated and covered with a protection cover. For low temperatures, maintenance by self-regulated heating tapes. Version for use in hazardous zones: on request.

3 FLEXIBLES CHAUFFANTS Basis: ELH/md - ELH/hd - ELH/a - ELH/sb Accessories : /i - /T - /it - /w - /Ex (explosion) CHARACTERISTICS AND VARIANTS ELH/md : Medium pressure flexible line with connectors at both ends /Ex Flexible line suitable for dangerous areas. ELH/hd : High pressure flexible line with connectors at both ends Temperature range: 100 C, 200 C, 250 C /Ex Flexible line suitable for dangerous areas. ELH/a: ELH/ad : ELH/ak : ELH/ae : ELH/sb : Analysis line Pressure-free service PTFE fixed internal flexible line Analysis line pressurized service RSL equipment at both ends analysis line with fixed copper internal pipe Analysis line with fixed stainless steel inside tube, 350 C /I Interchangeable internal PTFE flexible line /it /Ex flexible line suitable for dangerous areas. Interchangeable internal PTFE flexible line and sheath resisting pressure of foot Analysis line pressure-free service fixed PTFE tube Heating by self-regulating heating tape Manufacturing: factory Temperature ranges: antifreeze protection, 120 C Inside protection braid: "black" nylon ELH/sbA : Analysis line pressure-free service - fixed PTFE tube Heating by self-regulating heating tape Manufacture: on reel, cut to necessary length at expense of client Temperature ranges: antifreeze protection, 120 C Inside protection braid: "black" nylon /i tube PTFE interchangeable /it Interchangeable PTFE tube and cover resisting pressure of foot /Ex flexible line suitable for dangerous areas.

FLEXIBLE HEATING JACKETS Flexible Heating Jackets FULL RANGE OF FLEXIBLE HEATING JACKETS ADAPTED TO YOUR APPLICATIONS ELTRACE manufactures a range of flexible heating jackets particularly suited for

5 FLEXIBLE HEATING JACKETS Flexible Heating Jackets FULL RANGE OF FLEXIBLE HEATING JACKETS ADAPTED TO YOUR APPLICATIONS ELTRACE manufactures a range of flexible heating jackets particularly suited for the following applications: We have the technology to design jackets suitable for any shape of support. These are particularly flexible jackets and particularly easy to install in difficult to reach areas. The product is flexible, allowing excellent contact with the surface to be heated, meaning that the temperature is uniform and avoiding any hot points from forming. Taps and fittings in general Automatic valves Pneumatic or electric transmitters Flowmeters Meters and rotameters Ice levels Local indicators and pressure gauges Distribution "Clarinets" Filters Various tanks Pipe sections, flanges, couplings, etc. Protection of equipment exposed to flame or sparks TECHNICAL CHARACTERISTICS: Maximum power: 4800 Watts/m² Power supply voltage from 24 to 400 volts Design of silicon glass fabric or aluminum-coated glass fabric Amagnetic construction if necessary Many circuits per heating zone Backup heating circuits Total insulation by mineral or ceramic fiber Attaching eyelets for hooks built in to facilitate assembly JACKET DESIGN The outer envelope of the mattress consists of suitable fabric depending on the environment and the temperature requirements. The inside envelope is chosen according to the temperature of the product being conveyed, allowing for aggressions and dangers caused by malfunctioning. The heating wire is attached to the inside envelope on the mattress side. The insulating material is enclosed between two sealed envelopes, the various parts of which are stitched tightly together by fire-proof thread. The mattress formed in this way, previously formed of the equipment to be heated and/or insulated, is held in place by self-attaching strips to facilitate repeated disassembly and assembly. Each mattress can be equipped with a temperature sensor.

ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head

ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head Pt100 probe with compact KNS terminal head Class B, 4 wire connection Various probe available lengths