ALLPROG II Version

Transcription

1 ALLPROG II Version W W W. A L L P R O G. P L Strona 1

2 General information Help prepared for ALLPROG II ( METREX Software ) Contakt: allprog@o2.pl WEB: For assistance using information fields, which, depending on the degree of validity adopted the following sign: Little important information Average important information Very important information W W W. A L L P R O G. P L Strona 2

3 ALLPROG II a general description of the construction 1) Port System port which is connected to all the available cabling. 2) Power on / off switch enabling and disabling the device. 3) The display shows all necessary information. 4) Communication Led blinks during communication. 5) The device function keys. 6) Cursors are used to navigate menus are also the number keys. 7) OK key validation of selected items on the menu and to approve changes. STOP key, stop interrupting the process of selection. W W W. A L L P R O G. P L Strona 3

4 POWER ALLPROG II ALLPROG standard device is powered by the vehicle diagnostic connector. You can also connect with the cigarette lighter socket or power supply stabilized using a standard 12V / 1A. You can plug an ADAPTER 1 or ADAPTER 2 into a 12V IN: ADAPTER 1: ADAPTER 2: W W W. A L L P R O G. P L Strona 4

5 Hardware description ALLPROG II When the device appears on the screen menu. Move with cursors. Selecting followed by pressing OK. Out of the selected option is done by going down to the bottom of the mouse and selecting EXIT and approval of the OK key. W W W. A L L P R O G. P L Strona 5

6 SUPPORT FOR GROUP OF CARS ODOMETER VW SEAT SKODA AUDI VDO66(audi, seat, skoda, vw), option to odometer built in memory 93c66 they are below READ INFO, Reads the information type and version of the meter. On the third line of text is reading how the odometer is in the car. The most common is VDO and such is the option. But we can still find odometer MM (motometer), BOO (bosch or motometer), M73 (Magneti mareli, they are in cars VW / PASSAT and AUDI/A3, A6, TT) SEARCH KEY, searches for the key to the type of meter in the case, please find the message odometer version of the option READ INFO, which is written at the bottom of the display. RESET DASH, This option is used to reset the odometer. Once it is selected to be re-dial function SEARCH KEY. This function will reset the meter settings on the basis of data in eeprom (as it will reset the counter for a moment cut off from power supply). In the case of incorrect log on not using the options below. READ EEPROM, Read eeprom from the odometer. If the address value at the time of read-changing step as a bad sign it means to count!. Then you should reset your preferences and search for the key. This may be due to an attempt to read the car after 2000 which is not acceptable that the function (please select options for cars VW / Seat after 2000) WRITE EEPROM, Write EPROM in the odometer. READ KM, Reading the actual number of miles and pin. WRITE KM, Changing to a new state km. W W W. A L L P R O G. P L Strona 6

7 EDYTOR EEPROM, edytor buffer SEARCH PIN, edytor buffer EXIT, exit to main menu. VDO r->(Only audi) Option to read the memory odometer AUDI 93C86, as usual, and encrypted. After properly logging should see another menu: READ EEPROM, Read eeprom from the odometer. WRITE EEPROM, Write EPROM in the odometer. READ KM, Reading the actual number of miles and pin. WRITE KM, Changing to a new state km. EDYTOR EEPROM, edytor buffor. A4 NO KOMP Used to odometer VDO Audi A4 cars without a computer. Memory 93c46. is about audi '98 READ KM, Reading the actual number of miles. WRITE KM,Changing to a new state km. If the reprogramming of the counter will be able to hold on a minute, disconnect the battery. And everything returns to normal. A4 KOMP Used to odometer VDO Audi A4 cars with a computer. Memory 93c46. is about audi '98 W W W. A L L P R O G. P L Strona 7

8 READ KM, Reading the actual number of miles. WRITE KM,Changing to a new state km. If the reprogramming of the counter will be able to hold on a minute, disconnect the battery. And everything returns to normal. MM73 CRC Use the odometer after 2000 with the checksum. READ EEPROM, Read eeprom from the odometer.. When the odometer reading after a while the display is blanked for a moment it is normal. After reading everything returns to normal. WRITE EEPROM, Write EPROM in the odometer. READ KM, Reading the actual number of miles and PIN. WRITE KM,Changing to a new state km.during reprogram the display is blank it is normal. EDYTOR EEPROM, edytor buffor BOSCH CRYPTO/ KW1281/KWP2089 Pin to read the encrypted counters for memory 24c08 bosch. Prior to any use, contact the manufacturer. A3,A4,A6 MM73 Use to odometer from the year 1998 to The function is MM73 READ INFO. READ EEPROM, Read eeprom from the odometer.. When the odometer reading after a while the display is blanked for a moment it is normal. After reading everything returns to normal. W W W. A L L P R O G. P L Strona 8

9 WRITE EEPROM, Write EPROM in the odometer. READ KM, Reading the actual number of miles and PIN. WRITE KM,Changing to a new state km.during reprogram the display is blank it is normal. EDYTOR EEPROM, edytor buffor SEAT ALHAMBRA /VW SHARAN / FORD GALAXY Is an option to the old odometer by the year 2000 on the processor HC11. READ KM, Reading the actual number of milage. WRITE KM,Changing to a new state km. VDO r (seat, skoda, vw) Option to odometer built in memory 93c86 are from above 200x. READ INFO, Reads the information type and version of the meter. On the third line of text is reading how the odometer is in the car. The most common is VDO and such is the option. But we can still find odometer MM (motometer), BOO (bosch or motometer), M73 (Magneti mareli, they are in cars VW / PASSAT and AUDI/A3, A6, TT) SEARCH KEY, searches for the key to the type of meter in the case, please find the message odometer version of the option READ INFO, which is written at the bottom of the display. In the case of incorrect log on not using the options below. The option 86 is automatically unlocked in addition to special UNLOCK0 or a UNLOCK1 RESET DASH, This option is used to reset the odometer. Once it is selected to be re-dial function SEARCH KEY. This function will reset the meter settings on the basis of data in eeprom (as it will reset the counter for a moment cut off from power supply). W W W. A L L P R O G. P L Strona 9

10 In the case of incorrect log on not using the options below. READ EEPROM, Read eeprom from the odometer. If the address value at the time of read-changing step as a bad sign it means to count!. Then you should reset your preferences and search for the key. This may be due to an attempt to read the car after 2000 which is not acceptable that the function (please select options for cars VW / Seat after 2000) WRITE EEPROM, Write EPROM in the odometer. READ KM, Reading the actual number of miles and pin. WRITE KM, Changing to a new state km. EDYTOR EEPROM, edytor buffer EXIT, exit to main menu. MOTOMETR/ BOSCH (seat, skoda, vw), Option to odometer built in memory 24C0X. READ INFO, Reads the information type and version of the meter. On the third line of text is reading how the odometer is in the car. The most common is VDO and such is the option. But we can still find odometer MM (motometer), BOO (bosch or motometer), M73 (Magneti mareli, they are in cars VW / PASSAT and AUDI/A3, A6, TT) When is displayed motometr MM for bosch BOO. SELECT KEY, finds the key to the type of meter in the case did not find, please send the counter version of the option READ INFO, which is written at the bottom of the display or if it does not fit in the next screen. If you do not selected the meter will automatically select the key must be manually. Must be displayed OK if you do not restart the ignition power "POLO", "POLO ROUND", "LUPO", "GOLF V0", "GOLF V1", "GOLF V2", W W W. A L L P R O G. P L Strona 10

11 "GOLF V3","GOLF V4","KEY1", "KEY2", "KEY3", "KEY4", "KEY5", "KEY6", "KEY7" Turn off the ignition for a few seconds whereupon reconnect and log in to the next key until you see the message "OK" READ EEPROM, Read eeprom from the odometer. WRITE EEPROM, Write EPROM in the odometer. READ KM, Reading the actual number of miles and pin. WRITE KM, Changing to a new state km. If the display not will change km, disconnect the battery for a while to change the settings of kilometers. EDYTOR EEPROM, edytor buffer EXIT, exit to main menu. W W W. A L L P R O G. P L Strona 11

12 SUPPORT FOR ANY GROUP OF CARS ODOMETER Standard to perform an adjustment of the meter after the OBD2 plug to connect the diagnostic socket. In most of the counters, select READ KM and if the state agrees km choose WRITE KM. The menu is intuitive, no need to specifically discuss each meter, if needed, this is explained in connection tab. READ INFO, Reads the information type and version of the meter. On the third line of text is reading how the odometer is in the car. RESET DASH, This option is used to reset the odometer. Once it is selected to be re-dial function SEARCH KEY. This function will reset the meter settings on the basis of data in eeprom (as it will reset the counter for a moment cut off from power supply). READ EEPROM, Read eeprom from the odometer. WRITE EEPROM, Write EPROM in the odometer. READ KM, Reading the actual number of miles and pin. WRITE KM, Changing to a new state km. EDYTOR EEPROM, edytor buffer SET 0 KM, setting of 0 km SEARCH PIN, edytor buffer EXIT, exit to main menu. W W W. A L L P R O G. P L Strona 12