BS 2,7-6,7. Steel Containers with Differential Pressure Valve for the CLEAN AGENT FS 49 C2 Extinguishing Agent. Optional
|
|
|
- Cecil Riley
- 5 years ago
- Views:
Transcription
1 BS 2,7-6,7 Steel Containers with Differential Pressure Valve for the CLEAN AGENT FS 49 C2 Extinguishing Agent FEATURES All components comply fully with international regulations for land and marine use. Approved according to SOLAS by a variety of shipping and offshore authorities. Tested and approved according to MSC/circ.848. Approved by a number of authorities for filling density up to 1,01 kg/litre and 52 bar. Allows functionary test without loss of extinguishing agent. The discharge valve 18-D series B has been subjected to extensive laboratory testing. Type approved by among others GL (Germanischer Lloyd) TECHNICAL CONTAINER DATA DATA SPECIFICATION NOTES Norm 1999/36/EEC (TPED) Pi ( ) marked Material 34CrMo4 Finish RAL 3000 Red Test Pressure 250 bar Approval By a Notified Body Outlet Connection 3/4 BSP Supplied With Cylinder Siphon tube, 20 mm Valve 18 D Safety Burst Disc,190 bar Filling Valve Pressure Switch Pressure Gauge, bar Safety Outlet Plug CE approved and BAM tested Optional Actuators Electrical Pyrotechnical or Solenoid Valve Pneumatic Mechanical Single Pneumatic, Combined Pneumatic Hand Knob Release, Wire Pull device Combined release devices
2 RELEASE DEVICES AND ACCESSORIES Solenoid valve with adapter. Delivered with steel tube complete including adapters for connection between solenoid valve and pneumatic release device. Pre bent tube set for release of master container. Connecting Solenoid valve with the release device. Electrically operated pyrotechnical release plunger. Operates with all fire alarm and release cabinets Pneumatic Release Plunger operating with pressure from solenoid valve or pilot, slave or master cylinder. Strike Knob Release Device. Pull the safety ring and strike the knob to release the valve. Wire Release Device operated by pulling on wire. Pressure Switch to monitor the pressure in the container to avoid leakage of the extinguishing agent. Complete with o-ring and sintered metal filter. Pilot Release Hose. Stainless steel high pressure tube Complete including adapters. 2,7 BS2,7-18-D 1,9-2, ,8 4,0 BS4,0-18-D 2,8-4, ,4 6,7 BS6,7-18-D 4,0-6, ,0
3 t o t a l f i r e p r o t e c t i o n o n e s u p p l i e r BS 13,4-30 Steel Containers with Differential Pressure Valve for the CLEAN AGENT FS 49 C2 Extinguishing Agent FEATURES All components comply fully with international regulations for land and marine use. Approved according to SOLAS by a variety of shipping and offshore authorities. Tested and approved according to MSC/circ.848. Approved by a number of authorities for filling density up to 1,01 kg/litre and 52 bar. Allows functionary test without loss of extinguishing agent. The discharge valve 18-D series B has been subjected to extensive laboratory testing. Type approved by among others GL (Germanischer Lloyd) TECHNICAL CONTAINER DATA DATA SPECIFICATION NOTES Norm 1999/36/EEC (TPED) Pi ( ) marked Material 34CrMo4 Finish RAL 3000 Red Test Pressure 250 bar Approval By a Notified Body Outlet Connection 3/4 BSP Supplied With Cylinder Siphon tube, 20 mm Valve 18 D Safety Burst Disc,190 bar Filling Valve Pressure Switch Pressure Gauge, bar Safety Outlet Plug CE approved and BAM tested Optional Actuators Electrical Pyrotechnical or Solenoid Valve Pneumatic Mechanical Single Pneumatic, Combined Pneumatic Hand Knob Release, Wire Pull device Combined release devices
4 t o t a l f i r e p r o t e c t i o n o n e s u p p l i e r RELEASE DEVICES AND ACCESSORIES, VALVE 18D Solenoid valve with adapter. Delivered with steel tube complete including adapters for connection between solenoid valve and pneumatic release device. Pre bent tube set for release of master container. Connecting Solenoid valve with the release device. Electrically operated pyrotechnical release plunger. Operates with all fire alarm and release cabinets Pneumatic Release Plunger operating with pressure from solenoid valve or pilot, slave or master cylinder. Strike Knob Release Device. Pull the safety ring and strike the knob to release the valve. Wire Release Device operated by pulling on wire. Pressure Switch to monitor the pressure in the container to avoid leakage of the extinguishing agent. Complete with o-ring and sintered metal filter. Pilot Release Hose. Stainless steel high pressure tube Complete including adapters. 13,4 BS13,4-18D 9-13, ,0 20 BS20-18D ,0 30 BS30-18D ,0
5 RELEASE DEVICES AND ACCESSORIES, VALVE B0431 Wire Release Device operated by pulling on wire. NOTE: Make sure that there is adequate slack on the wire when running wires through piping. See illustration left. Manual Release Device, pull handle to release. Pressure Switch to monitor the pressure in the container to avoid leakage of the extinguishing agent. Complete with o-ring and sintered metal filter. 13,4 BS13,4-B , ,0 20 BS20,0-B ,0 30 BS30-B ,0
6 BS 45,0-80,0 Steel Containers with Differential Pressure Valve for the CLEAN AGENT FS 49 C2 Extinguishing Agent FEATURES All components comply fully with international regulations for land and marine use. Approved according to SOLAS by a variety of shipping and offshore authorities. Tested and approved according to MSC/circ.848. Approved by a number of authorities for filling density up to 1,01 kg/litre and 52 bar. Allows functionary test without loss of extinguishing agent. The discharge valve 38-D series B has been subjected to extensive laboratory testing. Type approved by among others GL (Germanischer Lloyd) TECHNICAL CONTAINER DATA DATA SPECIFICATION NOTES Norm 1999/36/EEC (TPED) Pi ( ) marked Material 34CrMo4 Finish RAL 3000 Red Test Pressure 250 bar Approval By a Notified Body Outlet Connection 1 1/2 BSP Supplied With Cylinder Siphon tube, 38 mm Valve 38 D Safety Burst Disc,190 bar Filling Valve Pressure Switch Pressure Gauge, bar Safety Outlet Plug CE approved and BAM tested Optional Actuators Electrical Pyrotechnical or Solenoid Valve Pneumatic Mechanical Single Pneumatic, Combined Pneumatic Hand Knob Release, Wire Pull device Combined release devices
7 RELEASE DEVICES AND ACCESSORIES Solenoid valve with adapter. Delivered with steel tube complete including adapters for connection between solenoid valve and pneumatic release device. Pre bent tube set for release of master container. Connecting Solenoid valve with the release device. Electrically operated pyrotechnical release plunger. Operates with all fire alarm and release cabinets Pneumatic Release Plunger operating with pressure from solenoid valve or pilot, slave or master cylinder. Strike Knob Release Device. Pull the safety ring and strike the knob to release the valve. Wire Release Device operated by pulling on wire. Pressure Switch to monitor the pressure in the container to avoid leakage of the extinguishing agent. Complete with o-ring and sintered metal filter. Pilot Release Hose. Stainless steel high pressure tube Complete including adapters. 45,0 BS45,0-38 D 30,0-45, ,5 BS67,5-38 D 45,0-68, ,0 BS80,0-38 D 68,0-80,
HEAD VALVE. Model No.: NF 40/600V, NF 40/360V DESCRIPTION
HEAD VALVE Model No.: NF 40/600V, NF 40/360V DESCRIPTION NAFFCO 40/600 & NAFFCO 40/360 valve is a quick opening differential valve, especially designed for gaseous extinguishing agents in modular/centralized
Technical Data. Neck Threads: W 28.8 x 1 / 14. Water Capacity: Filling Density: Storage Pressure: Working Pressure: Test pressure: Weight (Empty):
45KG CO2 CYLINDER Make: SFFECO Standard: IS :7285 Type: Seamless Concave Bottom Bottom: W 28.8 x 1 / 14 Chrome Moly Steel W 28.8 x 1 / 14 Water Capacity: Filling Density: Storage Pressure: Working Pressure:
GW M5 WATER MIST NOZZLE K-5, LOW PRESSURE, NON-AUTOMATIC
DESCRIPTION The GW M5 is a compact low pressure water mist nozzle specifically developed for use in total and local protection water mist fire extinguishing systems both for marine and land based applications.
Manual pneumatic operated valves for fixed installations, CO2 and inert gases. Series B0430
Manual pneumatic operated valves for fixed installations, CO2 and inert gases B B0430 Working pressure p max. 250 bar Temperature range - 20 C + 60 C Seat orifice size 12 mm Material Valve body brass Inlet
MARINE HIGH PRESSURE CARBON DIOXIDE SYSTEMS Component Sheet Library
MARINE HIGH PRESSURE CARBON DIOXIDE SYSTEMS Component Sheet Library One Stanton Street / Marinette, WI 54143-2542, USA / +1-715-735-7411 / www.ansul.com Copyright 2015Tyco Fire Products LP. / All rights
Vol. l. Empty wt. kg. Dia. Vol l. Empty wt. Dia.
Container Assemblies and Connections Multiple Part Numbers Container Assemblies and Connections ISS CG 2 25 bar Container Assemblies Assy Part no. Container Assembly Valve Empty wt. kg Vol. l Dia. Cont.
BALL VALVE CATALOGUE //
BALL VALVE CATALOGUE // The Fort Vale Range of Ball Valves CATALOGUE REVISION_01-27.01.1 Fort Vale Engineering Ltd. 201 THIS PAGE IS INTENTIONALLY BLANK BALL VALVE CATALOGUE // CONTENTS // AIRLINE BALL
For further assistance, call
PANIC & EMERGENCY EXIT DOORS Inside: - Strand Face Fit Panic Bar - Strand Face Fit Panic Pad - Fuhr Concealed Panic Bar Locks - Master & Slave - Outside Access Kit for Face Fitting & Concealed Panic Bars
ARGONITE Fire Protection Systems
GENERAL INFORMATION The Chemetron ARGONITE Fire Protection Systems are clean agent, automatic extinguishing systems using Argonite (IG55) and consisting of four basic components and their associated accessories.
2-position electric actuators with Ball valves VBZ ½...11/4
4 831.2 & VBZ ½...11/4 2-position electric actuators with Ball valves VBZ ½ 11/4 90 angle - Unidirectional rotation VBZ ½ 11/4 Electric rotary actuators for two-port ball valves Operating voltage AC 230
Cylinder Valve Assembly Series
Cylinder Valve Assembly Series CV, PCV, FCV and MCV series CV Series (Cylinder/Valve) Cylinder/Valve Assembly with: Cylinder & Valve PCV Series (Pre-Engineered Nozzle/Cylinder/Valve) Cylinder/Valve Assembly
GENERAL PURPOSE. 3 Port 1/8 Pilot Valves Two Hands Safety Valve BC 1/4 Body Ported Valves : Mechanically Operated...
GENERAL PURPOSE 3 Port 1/8 Pilot Valves.........................19 Two Hands Safety Valve....................... 199 BC 1/ Body Ported Valves :.................... 00 Mechanically Operated.................
FYJR.EX Carbon Dioxide Extinguishing System Units, General Use. Carbon Dioxide Extinguishing System Units, General Use
Page 1 of 11 Page Bottom FYJR.EX1368 Carbon Dioxide Extinguishing System Units, General Use Carbon Dioxide Extinguishing System Units, General Use See General Information for Carbon Dioxide Extinguishing
January 2007 Approval Guide Fixed Extinguishing Systems 5-57
Fixed Extinguishing Systems 5-57 CHEMETRON Fire Systems, 4801 Southwick Dr, 3rd Floor, Matteson IL 60443 High Pressure System Equipment. Automatic Actuator. 1-026-02, -0250. Alarm. 1-003-0033, -0070, -0071,
Table 1. Table 2. Table 3: Toxicology/Environmental FM-200 (UL/FM) 14A-07H SECTION 1 - INTRODUCTION. Agent Physical Properties FM-200
02 2010-03 SECTION 1 - INTRODUCTION Agent Physical Properties Table 1. Agent Physical Properties HFC-227ea Chemical structure CF 3 CHFCF 3 Chemical name Heptafluoropropane Molecular weight 170 Boiling
Fire & Gas Dampers. Fire & Gas Dampers are used in ventilation systems to prevent the spread of flame and/or smoke between divisions.
Fire & Gas Introduction Fire & Gas are used in ventilation systems to prevent the spread of flame and/or smoke between divisions. Authority/Certification Wozair manufacture three types of Fire & Gas Damper
Pressure Control, Differential Pressure Control, Type RT
MAKING MODERN LIVING POSSIBLE Data sheet Control, Control, Type RT An RT control contains a operated single-pole changeover contact, the position of which depends on the in the inlet connection and the
Marine Fire and Gas Dampers
M 3.2/2/EN/ 2 Marine Fire and Gas Dampers Type JFD Telephone + 6 06-678 8188 Telefax + 6 06-678 8288 / 388 E-mail enquiry@troxapo.com www.troxapo.com Contents Description Description 2 Accessories 6 Construction;
M-50/55 Series. Fixed setting flow switch with in-line flow
M-50/55 Series Fixed setting flow switch with in-line flow Features Very accurate custom flow settings For corrosive and non-corrosive liquids or gases All-Teflon switch available Senses increasing or
BUTTERFLY VALVES SERIES S93-S94
BUTTERFLY VALVES SERIES S93-S94 ALFA VALVES - SERIES S93-S94 DOUBLE FLANGE - SERIES S48 Alfa Europe B.V. was founded in 2001 in the Netherlands designing and manufacturer high quality butterfly valves
Alpha Series Systems
GENERL INFORMTION LPH SERIES SYSTEM EQUIPMENT DESCRIPTION The Chemetron Fire Systems are automatic suppression systems using the FM-200 chemical agent and consisting of four basic components and their
Alpha Series Systems
GENERL INFORMTION LPH SERIES SYSTEM EQUIPMENT DESCRIPTION The Chemetron Fire Systems are automatic suppression systems using the FM-200 chemical agent and consisting of four basic components and their
TECHNICAL DATA 1-1/2 (dn40)
July 1, 2011 Deluge Valves 209a DESCRIPTION The Viking Model E-3 1-1/2 Deluge Valve is a quick-opening, differential type flood valve with a rolling diaphragm clapper. The deluge valve is used to control
HYDRAULIC PISTON ACCUMULATORS
HYDRAULIC PISTON ACCUMULATORS WWW.SERVI.NO Product development and production at Servi Cylindersservice' top modern facilities in Rissa. 2 2 SERVI GROUP Ever since 1912, Servi Group has been a key player
Q= C. v P S Refer to Table 1 for part numbers and shipping weights. Accessories: Table 1: Valve Part Numbers and Specifications
1 of 9 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can be used to facilitate manual
S v S e r i e s F M f i r e e x t i n g u i s h i n g s y s t e m
Clean S v S e r i e s F M - 2 0 0 f i r e e x t i n g u i s h i n g s y s t e m Advantages The Sv Series Clean Agent Fire Extinguishing System utilizes FM-200 as the extinguishing medium. FM-200 is a colorless,
Model DDX Deluge Valves 4" (100 mm), 6" (150 mm) and 165 mm Sizes
Features 1. Differential-type, lightweight, dependable construction. 2. Easily trimmed for releasing by: Manual pull stations Wet pilot sprinklers Dry pilot actuators Solenoid valves 3. Drop in seat &
TECHNICAL DATA. Q= C v P S
1 of 9 1. DESCRIPTION The Viking Model E-1 Deluge Valve is a quick-opening, differential diaphragm, flood valve with one moving part. The deluge valve is used to control water flow in deluge and preaction
TECHNICAL DATA. Q= C v P Cv = Flow Factor (GPM/1 PSI P)
1 of 9 1. DESCRIPTION The Viking 2 (DN50) is a quick-opening, differential diaphragm, flood valve with one moving part. The deluge valve is used to control water flow in deluge and preaction sprinkler
TECHNICAL DATA. Inlet Type Outlet Type OBSOLETE 6 (DN150)
January 13, 2006 Deluge Valves 211 a 1. PRODUCT NAME Viking Model E-1 Deluge Valve 3 (DN80) Available since 1985 4 (DN100) Available since 1985 6 (DN150) Available since 1984 2. MANUFACTURER THE VIKING
Solenoid valve. Solenoid Coil
Solenoid valve Solenoid valve Solenoid Coil Plunger Valve body A simple solenoid valve consists ofi: Valve body with a plunger the plunger is made of metal Coil an electrical coil if the coil is given
Model DDX Deluge Valve 8 (200mm) Features
Model DDX Deluge Valve 8 (200mm) Bulletin 514 Bulletin 514 Features 1. Differential Latch-type, lightweight, dependable construction. 2. Easily trimmed for releasing by: Manual pull stations Wet pilot
Type and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
Part 1: Land Applications Machinery Spaces, Industrial Hazards, Combustion & Gas Turbine Enclosures, Light & Ordinary Hazards
Nozzle Design Layout Part 1: Land Applications Machinery Spaces, Industrial Hazards, Combustion & Gas Turbine Enclosures, Light & Ordinary Hazards Fogex Nozzles Fogex water mist nozzles are selected for
Worldwide Contacts.
Worldwide Contacts www.tyco-fire.com DV-5 Remote-Resetting, Pressure-Reducing Deluge Valve, Limited Space Valve Cabinet General Description The TYCO DV-5 Remote-Resetting, Pressure-Reducing Deluge Valve,
updated 08/2010 SOLENOID VALVES
SOLENOID VALVES TABLE OF CONTENTS INTRODUCTION 3 2/2 CONTINUOUS CURRENT OPERATOR 4 2/2 LATCHING OPERATOR 6 BASE OF DOROT SOLENOID VALVE 8 3/2 CONTINUOUS CURRENT SOLENOID VALVE 10 3/2 LATCH SOLENOID VALVE
INSTALLATION INSTRUCTIONS AND OPERATION MANUAL
INSTALLATION INSTRUCTIONS AND OPERATION MANUAL FS Series Rolling Fire Door Operators CORPORATION GENERAL NOTES TO REDUCE THE RISK OF SEVERE INJURY OR DEATH, READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS
Deluge Pressure Reducing Valves. Model 68 DE\ EL\ PORV\ PR. Electrically and Pneumatically Actuated, Pressure Reducing, Remote-Reset, Deluge Valve
Dorot Fire Protection Division Model 68 DE\ EL\ PORV\ PR Electrically and Pneumatically Actuated, Pressure Reducing, Remote-Reset, Deluge Valve Certification & compliance by design ANSI FCI 70- Class VI
Component Sheet Library
MARINE sapphire ENGINEERED CLEAN-AGENT SYSTEMS Component Sheet Library One Stanton Street / Marinette, WI 54143-2542, USA / +1-715-735-7411 / www.ansul.com Copyright 2014Tyco Fire Products LP. / All rights
Deluge Valves. Model 68 DE\ HM-MR. Hydraulically Actuated Manual-Reset Deluge Valve. Dorot Fire Protection Division
Dorot Fire Protection Division s Model 68 DE\ HM-MR Hydraulically Actuated Manual-Reset Certification & compliance by design ANSI FCI 70-2 Class VI seat leakage class UL listed under VLFT category Fire
Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
PHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing
PHLOX II Ignition Control Systems Ignition Control Coil Rails Ignition Leads Pickups Coils Complete ignition system Precise ignition timing Increased spark plug durability Easy integration via CAN On-board
ZEUS type BRONZE PNEUMATIC ACTUATED VALVE. Model/Ref:
ZEUS type BRONZE PNEUMATIC ACTUATED VALVE Model/Ref: 1422203 www.lauridsenindustri.com CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework.
Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
Heavy duty pressure switch MBC 5000 and MBC 5100
Data sheet Heavy duty pressure switch MBC 5000 and MBC 5100 MBC pressure switches are used in industrial and marine applications where space and reliability are the most important features. MBCs are compact
Test Which component has the highest Energy Density? A. Accumulator. B. Battery. C. Capacitor. D. Spring.
Test 1 1. Which statement is True? A. Pneumatic systems are more suitable than hydraulic systems to drive powerful machines. B. Mechanical systems transfer energy for longer distances than hydraulic systems.
Command, control and regulation
186 CONTROL SYSTEMS Command, control and regulation Mechanical regulators... 188 NO-NC thermostats... 191 Twin thermostats... 192 Change-over thermostats... 193 Hygrostats... 194 Flashing signal device...
Available manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
Temperature controls, Type RT
MAKING MODERN LIVING POSSIBLE Technical brochure Temperature controls, Type RT RT temperature controls incorporate a temperature controlled, single-pole changeover switch where the contact position depends
1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
Connection Ports: 3/4 1 1/4 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION F4-DMD series In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1..1): F4-DMD/8/11: 7 bar (11 psi) F4-DMD1/3/4: 4 bar (8 psi) Housing Burst
Knob handles IP
Knob handles IP1 2.04.04 Index Description Page 3 Technical features: Page 4 Range and overall dimension of the knobs without pushbutton: Range and electric diagrams of the knobs with pushbutton: Pages
Amal are not only known for the high quality of their products but also for the exemplary levels of commitment and dedication shown to their
Amal are not only known for the high quality of their products but also for the exemplary levels of commitment and dedication shown to their customers.this commitment to complete customer satisfaction
Sandvik TH663 Technical Specification
Spec. number TH663-04 Technical Specification APPLICATIONS The is a high productivity 63 tonne articulated underground dump truck for use in 6 x 6 meter haulage ways. Operator safety, health and comfort
Solenoid valves VZWM-L
Key features and type codes Brief description Indirectly controlled poppet valve with diaphragm control Connection, valve G¼ G2 Flow rate 1,400 31,000 l/min Available in brass or stainless steel casting
Sandvik TH551 Technical Specification
Spec. number TH551-05 2014-08-14 Technical Specification APPLICATIONS The is a high performance 51 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. Operator safety, health
Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN
Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications
Kitemark CE Fire Extinguishers KMCE SERIES PRESSURE EQUIPMENT DIRECTIVE
Kitemark CE Fire Extinguishers KMCE SERIES PRESSURE EQUIPMENT DIRECTIVE EDITION 2018 CORPORATE PROFILE EVERSAFE EXTINGUISHER SDN. BHD. (053162-V) 1 2 3 About Us: Eversafe Extinguisher Sdn. Bhd. incorporated
DELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : VALVE OPERATION TRIM DESCRIPTION DESCRIPTION PRESSURE THREADED OPENING
DELUGE VALVE MODEL: SD-DVA TECHNICAL DATA : NOMINAL SIZE MATERIAL MAXIMUM SERVICE PRESSURE 200, 150, 100, 80 & 50NB Cast Iron 12 Bar (175 PSI) THREADED OPENING MOUNTING FACTORY HYDROSTATIC TEST PRESSURE
DELUGE VALVE DATA SHEET
FIRE FIGHTING EQUIPMENT DATA SHEET DELUGE VALVE DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 02 PROJECT : QUANTITY : 03 LOCATION : SERVICE : FIRE WATER AND / OR FOAM SYSTEM
www.clubsuprafrance.com CLUTCH 1996 Toyota Supra 1995-96 Clutch Supra DESCRIPTION The single, dry-type disc clutch uses a hydraulicallyoperated master cylinder with a clutch release cylinder mounted on
Connection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1.5.1): F1-XD4/63/1: 1 bar (15 psi) F1-XD16/25/4: 8 bar (12 psi) Housing Burst (acc. to
Actionair A-60 Marine Fire Damper Designed for inclusion in Marine and Offshore Projects
March 06 A-60 Marine Fire Dampers Tests and Approvals A60 Fire Rated. Lloyds Register of Shipping Approved. Marine Equipment Directive compliant. USCG Approved. Germanischer Lloyds Approved. American Bureau
Pressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRAULIC FILTRATION F8-D1 series In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x:
Black Teknigas Combustion Range
Black Teknigas Combustion Range Solenoid Gas Safety Shut-Off Valves WattsIndustries.co.uk SOLENOID GAS SAFETY SHUT-OFF VALVES Provengas Automatic Gas Proving and Isolation System A range of gas proving
Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T 3.10.5.1) Burst 330 bar (4800 psi) (acc. to NFPA T 3.10.5.1) Housing
Volkswagen New Beetle Brake System ABS, ABS/EDL 45 Anti-lock Brake System (ABS) (Page GR-45)
45 Anti-lock Brake System (ABS) (Page GR-45) Anti-lock brake system (ABS) and anti-lock brake system with electronic differential lock (ABS/EDL) ITT Mark 20 IE Differences between ABS ITT Mark 20 IE and
The company 1 Certifications 2
PNEUMATIC ACTUATORS PRISMA MECÁNICA S.L The company 1 Certifications 2 ALUMINIUM PNEUMATIC ACTUATORS Technical features 3 PA range 5 P range 7 Disassembly and materials 9 PA dimensions 11 P dimensions
G Plus Line Synchronous Generators. Motors Automation Energy Paints
G Plus Line Motors Automation Energy Paints Available with ratings up to 4200kVA, the G Plus series generators from WEG are normally used in gas and diesel generating set units. They are also suited to
Instructions. for Installation, Operation and Maintenance of ABO Butterfly Valves, Series 600 and 900
Instructions for Installation, Operation and Maintenance of ABO Butterfly Valves, Series 600 and 900 1. Instructions 2. Valve Description 3. Installation 4. Operation 5. Removal 6. Maintenance 7. Repairs
Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T ) Burst 840 bar (12200 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T 3.10.5.1) Burst 840 bar (12200 psi) (acc. to NFPA T 3.10.5.1) Housing
Filtrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
Knowsley SK s turnkey solution for extinguishing fires which can occur on helipads and helidecks NESTOTM. Deck Integrated Fire Fighting System (DIFFS)
NESTOTM Knowsley SK s turnkey solution for extinguishing fires which can occur on helipads and helidecks NESTOTM Deck Integrated Fire Fighting System (DIFFS) Integrated NESTO TM Pop-up nozzles A DIFFS
Sigma Series Systems
GENERL INFORMTION The Chemetron Fire Systems are automatic suppression systems using the FM-200 chemical agent and consisting of four basic components and their associated accessories. FM-200 Components
CH.4 Basic Components of Hydraulic and Pneumatic System/16 M HAP/17522/AE5G
Content : 4.1 Hydraulic and Pneumatic actuators. 10 Marks Hydraulic Actuators - Hydraulic cylinders (single, double acting and telescopic) construction and working, Hydraulic motors (gear and piston type)
Controllers and Instrumentation
Controllers and Instrumentation Controllers and Instrumentation The Optimal Solution for Every Task Local Pneumatic Control Circuits Inexpensive local control circuits are often used for simple control
Chapter 6 Pneumatic Logic Sensors and Actuators
Chapter 6: Penumatic logic sensors and actuators -IE337 Chapter 6 Pneumatic Logic Sensors and Actuators 1 Introduction to Pneumatic Why pneumatic? Pneumatic control system is frequently used in building
Sandvik TH430 Technical Specification
Technical Specification APPLICATIONS The is a true 30 metric tonne articulated mine dump truck that will fit in a 4 x 4 m envelope. The TH430 is equipped with a standard, fully enclosed, vibration isolated,
Connection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
LINED EQUIPMENT // Fort Vale Engineering Ltd CATALOGUE REVISION_
LINED EQUIPMENT // 3 45 Footvalve 4 to 3 Hydraulic Footvalve 25mm Ball Valve 50mm Ball Valve 80mm Ball Valve 3" Butterfly Valve MK3 65mm Flanged Relief Valve 80mm Flanged Vacuum Vent Valve Fort Vale Engineering
Customized Solutions. Safety & Reliability Stainless steel 316 products
Customized Solutions Safety & Reliability Stainless steel 316 products REDUNDANT CONTROL SYSTEM (RCS) Applications Emergency Shutdown Systems Burner Management Systems Isolation and Venting Systems High
FIRE SAFE TEST CERTIFICATE ACCORDING TO : API 6FA Third Edition April Valve type: BALL VALVE SIDE ENTRY TRUNNION. Size 2 Class 2500 LBS
FIRE SAFE TEST CERTIFICATE ACCORDING TO : API 6FA Third Edition April 1999 Valve type: BALL VALVE SIDE ENTRY TRUNNION Size 2 Class 2500 LBS Material Stainless Steel Pag. 1 of 9 CONTENTS : 1. SCOPE. PAGE
Quality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
Bulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
Centralised Control Panel
Centralised Control Panel ASCO Centralised Control Panel Customised to your needs ASCO latest solution is tailored to meet customer s requirements. We provide complete panel solution with valves built
Hydrostatic Release Unit
008 www.safetbag.com Hydrostatic elease Unit SAFE T FLEX FLEXI TANK MEİC MAH. 5748/6 SK NO:10 BONOVA / IZMI - TUKIYE T:+90 232 431 10 00 F:+90 232 431 10 33 G:+90 532 417 05 13 HU is a device to be used
Solenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
5/2 and 5/3 Way Valves
Caracteristics to VDI 9 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Ceramic Spool Valve Mounting On base plate, Tube connection Base plate Port size G1/
PRODUCT INFORMATION SKINTOP ST-M
High oil-resistance for maximum reliability Permanent vibration protection Wide, variable clamping ranges Optimum strain relief Various accessories (e.g. multiple sealing inserts) Good chemical resistance
HPCO 2. Fire Extinguishing System
HPCO 2 Fire Extinguishing System The Janus Fire Systems HPCO 2 Fire Extinguishing System utilizes highly pressurized carbon dioxide as the extinguishing medium. Carbon dioxide (CO 2 ) is a dry, inert,
Horizontal Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Horizontal Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
Approved for use as fixed fire extinguishing system for machinery spaces and cargo pump rooms.
Certificate No: TAF00000D7 This is to certify: That the Waterbased Fixed Fire Extinguishing System with type designation(s) VID Fire-Kill K6 Pacific Fine Water Spray (ceiling), VID Fire-Kill K6 North Sea
N-03 STEERING GEAR CONTROL SYSTEMS
Guideline No.: N-03(201510) N-03 STEERING GEAR CONTROL SYSTEMS Issued date: October 20,2015 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements,
Injection Lubricators
Injection Lubricators Section Introduction Why Injection Lubrication?...2 Which Kind of Injection Lubricator Do I Need?... 3 In-Line Features...4 Multi-Point Features...5 L50 In-Line Features, Ordering
IMTS 2012 Valve Control
Pneumatic Control Mechanical Control IMTS 2012 Valve Control Ryan Hettinger Applications Engineer Festo Corporation Solenoid Control Fieldbus Control Integrated PLC Control IMTS 2012 Pneumatic Control
Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation
Deluge Valve DV-5 Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation GeneralDescription The Model DV-5 Deluge Valve (described in Technical
SIGRAFLEX UNIVERSAL. Gasket Sealing Sheet made from Impregnated Graphite with Tanged 316L Stainless Steel Reinforcement. Quality first solutions
SIGRAFLEX UNIVERSAL Gasket Sealing Sheet made from Impregnated Graphite with Tanged 316L Stainless Steel Reinforcement Quality first solutions www.agaus.com.au Page 2 of 7 Sigraflex Universal is a High
Vertical Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Vertical Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems