Job Name Sitka Trooper Academy. Bid Date Nov 13, Submittal Date Nov 13, 2013

Transcription

1 Date: Nov, raybar Electric Company, Inc. th Avenue South Seattle WA Phone: () - Fax: () - Job Name Bid Date Nov, Submittal Date Nov,

2 FF raybar Electric Company, Inc. Page / Date: Nov, Page / Transmittal raybar Electric Company, Inc. th Avenue South Seattle WA Phone: () - From: Shawn Mitchell Project Location Contact: ATTACHED WE ARE SENDIN YOU COPIES OF THE FOLLOWIN ITEMS: Drawings Specifications Other: Prints Information Plans X Submittals THESE ARE TRANSMITTED FOR: Prior Approval Resubmittal for Approval Record X Approval Corrections Bids due on: Approval as Submitted Your Use Other: Approval as Noted Review and Comment MF Part LED X COOPER R-LD--A-UNV-L-CD-U LED WRAP COOPER WNLED-LD--F-UNV-L-CD-U FL X COOPER R-A-UNV-L-A/-/- ER-U FL WRAP COOPER WN-A-UNV-ER-U Item Note: Provided with series K lamps

3 Submitted by raybar Electric Company, Inc. R-LD--A-UNV-L-CD-U : LED X RASB- Description R LED is a lensed troffer series. This high quality luminaire is dedicated to the latest solid state lighting and electronic driver technology for optimal performance and energy efficiency. The R LED is compatible with all of today s popular ceiling systems and is available with a number of options and accessories for application versatility. The R LED series features efficiency, quality and performance. The series is an excellent choice for commercial office spaces, schools, hospitals or retail merchandising areas. COOPER LIHTIN - METALUX Catalog # Project Comments Prepared by Date Specification Features Construction Rigid housing is die formed of code gauge prime cold rolled steel and features full length die-formed stiffeners and unibody endplate for added strength. Side flanges are hemmed. Innovative design provides superior lens brightness uniformity and visual comfort. Unibody endplates are securely attached with interlocking tabs and screws. Four auxiliary fixture end suspension points provided. KOs for continuous row wiring. Endplates have integral rid-lock feature for safety and convenience. Controls The R LED is equipped standard with a -V continuous dimming driver that works with any standard -V control/dimmer. Combine with energy-saving products like occupancy sensors, daylighting controls, and lighting relay panels from Cooper Controls (www. coopercontrol.com) to maximize energy savings. Electrical Long-Life LED system coupled with electrical driver to deliver optimal performance. LED s available in k or k with a CRI. Projected life is, hours at % lumen output. culus listed. Electronic drivers are available for -V applications. A -V dimming driver is standard. Finish Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibition. Housing and driver cover finished with new % reflective white enamel for superior performance. PAF Painted After Fabrication option also available. Hinging/Latching Positive spring loaded steel latches with baked white enamel finish. Safety-lock T-hinges allow hinging and latching either side. Frame/Shielding Die formed, heavy gauge, flat steel door with reinforced mitered corners and baked white enamel finish. Flat and regressed aluminum doors also available. Positive light seals. Light stabilized, acrylic prismatic lens. Standard # pattern. Compliance Modules are UL recognized components and indoor luminaires are culus listed for ºC ambient environments, RoHS compliant, and LED modules comply with IESNA LM- and LM- standards. DesignLightsTM Consortium Qualified (high lumen version only). Refer to org Qualified Products List under Family Models for details. R LED LED ' x ' LED Troffer eneral Recessed LED Troffer For Use in Insulated Ceilings -/" [mm] -/" [mm] Mounting Data Door Frames Energy Data /" [mm] K.O. () Access Plate /" [mm] K.O. () -/" [mm] C CFA CRA Flat, White Flat, Extruded Deep, Regressed, Steel White Aluminum Extruded White Aluminum Input Watts: =W =W -/" [mm] -/" [mm] " [mm] -/" [mm] -/" [mm] Ceiling Compatibility rid/lay-in Standard Concealed T Slot rid Ceiling Exposed rid Concealed T Slot rid Trim Safe and convenient means of disconnecting power Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADF -- ::

4 Submitted by raybar Electric Company, Inc. R-LD--A-UNV-L-CD-U : LED X RASB- R LED Photometrics RLED-LD--A- UNV-L-CD-U Dimming Driver Linear LED K (II). x mounting height, ( ). x Efficiency: % Lumens: Input Watts:.W Efficacy:. LPW RLED-LD--A- UNV-L-CD-U.IES Candlepower Angle Along II Across RLED-LD--A- UNV-L-CD-U Dimming Driver Linear LED K (II). x mounting height, ( ). x Efficiency: % Lumens: Input Watts:.W Efficacy:. LPW RLED-LD--A- UNV-L-CD-U.IES Candlepower Angle Along II Across Coefficients of Utilization Effective floor cavity reflectance % rc % % % % % % rw Coefficients of Utilization Effective floor cavity reflectance % rc % % % % % % rw Zonal Lumen Summary Zone Lumens %Fixture Luminance Data Average Average Average Angle -Deg -Deg -Deg in Deg cd/sm cd/sm cd/sm Zonal Lumen Summary Zone Lumens %Fixture Luminance Data Average Average Average Angle -Deg -Deg -Deg in Deg cd/sm cd/sm cd/sm Ordering Information SAMPLE NUMBER: R-LD--A-UNV-L-CD-U Rating Blank= Standard ATW-SW= Chicago Rated Width Blank=' Width Trim =rid/lay-in (Standard) () =Concealed T =Slot rid Series R=eneral Purpose Troffer () LED LD=LED. LED Lumens Output () = = Shielding A=A. A=A. AMIN=A. MIN A/=A. F=A. Frost F=A. Frost Voltage () UNV=Universal Voltage - () L=Single Element Fuse M=Double Element Fuse Flex=Flex Installed (),() EL=Emergency Installed CCT L=K L=K L=K L=K Driver CD=-V Dimming Driver SD=Step-Dim (Bi Level) LTD=Fifth Light (DALI) Driver Number of Drivers = Driver Packaging PAF=Painted After U=Unit Pack Fabrication PALC=Palletized =asket, Door Frame Fixtures In Carton and Housing = plus asket between Lens and Door = and plus asketing on Mounting (),() Surface of Fixture Trims ACCESSORIES EQ-CLIP-U=T-BAR Safety Earthquake Clips () Door Frame Standard=Flat White Steel Door (Leave Blank) FA=Flush White Extruded Aluminum c/w Spring Latch RA=Regressed White Extruded Aluminum FAN=Flush Natural Anodized Extruded Aluminum RAN=Regressed Natural Anodized Extruded Aluminum FAB=Flush Black Extruded Aluminum RAB=Regressed Black Extruded Aluminum NOTES: () An EQ rid Clip is recommended for all /" ceiling systems. () Products also available in non-us voltages and frequencies for international markets. () Not available when specifying emergencies, voltage must be specific. () EL options are non-integral. () Call factory. () Nominal lumen output. () DesignLights TM Consortium Qualified (high lumen only). Refer to Qualified Products List under Family Models for details. () asketing only available with aluminum door frame. () asketing minimum.. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. SHIPPIN DATA Catalog No. Wt. Pallet R-LD- lbs. R-LD- lbs. Specifications and dimensions subject to change without notice. Customer First Center Highway South Peachtree City, A.. FAX. ADF -- ::

5 Submitted by raybar Electric Company, Inc. WNLED-LD--F-UNV-L-CD-U : LED WRAP RASB- COOPER LIHTIN - METALUX DESCRIPTION WNLED is a versatile LED wraparound series which can be used in a broad range of commercial and light industrial applications. This high quality luminaire utilizes the latest solid state lighting and electronic driver technology for optimal performance and energy efficiency. The WNLED is an ideal choice for either general purpose lighting or higher-grade applications. This series can be the illumination solution in commercial, industrial, retail and residential applications. SPECIFICATION FEATURES Catalog # Project Comments Prepared by Date Construction Housing consists of die formed cold rolled steel. Ends formed with the housing for strength and provisions for continuous row aligners. Steel end plates with /" KO and light-seal embossment. Driver cover can be removed by taking out four pan screws. Controls Equipped standard with a -V continuous dimming driver that works with any standard -V control/dimmer. Dimming range is % to %; varies by control device. Combine with energy saving products like occupancy sensors, day lighting controls, and lighting relay panels from Cooper Controls ( to maximize energy savings. Electrical Long-Life LED system coupled with electrical driver to deliver optimal performance. LED s available in K or K with a typical CRI. Projected life is, hours at % lumen output. CSA listed. Electronic drivers are available for -V applications. A - V dimming driver is standard. Finish Multistage iron phosphate pretreatment ensures maximum bonding and rust inhibitor. High reflective paint after fabrication, baked white enamel finish is standard. Channel/Wireway Cover Die formed heavy gauge steel. Tight fit for ease of maintenance. Shielding Acrylic lens is % frost (standard). Sides have inside linear prisms and bottom has pyramidal prisms for low brightness control. Installation Fixture may be surface, pendant, or stem mounted. See accessories below for ordering information. Compliance CSA Listed. WNLED Wraparound LED MOUNTIN DATA ' -/" [mm] -/" [mm] " [mm] -/" [mm] -/" [mm] -/" [mm] Ceiling Stand-Off Embossments round Screw Bump /" [mm] K.O. () " [mm] -/" [mm] -/" [mm] ' -/" [mm] -/" [mm] " [mm] -/" [mm] " [mm] " [mm] -/" [mm] " [mm] -/" [mm] " [mm] -/" [mm] " [mm] WATTAE Length Lumens Wattage ft. ft. ft. ft. Safe and convenient means of disconnecting power. COOPER LIHTIN ADF

6 Submitted by raybar Electric Company, Inc. WNLED-LD--F-UNV-L-CD-U : LED WRAP RASB- WNLED PHOTOMETRICS Coefficients of Utilization WNLED-LD--F- LW-UNV-L-CD-U Electronic Driver K LEDs (II). x mounting height, ( ). x WNLED-LD--F- LW-UNV-L-CD-U Candlepower Angle Along II Across Coefficients of Utilization WNLED-LD--F- UNV-L-CD-U Electronic Driver K LEDs (II). x mounting height, ( ). x WNLED-LD--F- UNV-L-CD-U Candlepower Angle Along II Across Effective floor cavity reflectance % rc % % % % % % rw Effective floor cavity reflectance % rc % % % % % % rw Zonal Lumen Summary Zone Lumens %Fixture Luminance Data Average Average Average Angle -Deg -Deg -Deg in Deg cd/sm cd/sm cd/sm Zonal Lumen Summary Zone Lumens %Fixture Luminance Data Average Average Average Angle -Deg -Deg -Deg in Deg cd/sm cd/sm cd/sm ORDERIN INFORMATION SAMPLE NUMBER: WNLED-LD--F-UNV-L-CD-U Length = ft. = ft. Series WNLED=Commercial Wraparound Lamp LD=LED. LED Lumens Output = () = = = () Lens F=Frost Acrylic (standard) Voltage =V () =V () UNV=Universal Voltage - EL=Emergency Installed () Lamps Installed L=K L=K Driver CD=-V Dimming Driver SD=Step-dim (Bi Level) () LTD=Fifth Light (DALI) Driver () Number of Drivers = Driver = Drivers Packaging U=Unit Pack ACCESSORIES SCF=Fixed Stem Set (Specify Length) SCS=Swivel Stem Set (Specify Length) SCA=Adjustable " Stem Set AB/Spacer-U=Spacer -/" to -/" from ceiling (Use per fixture) NOTES: () ft. model. () drivers required. () ft. model only. () Specify or V. EL option is only available for -V applications. () Step-dim only available for lumen unit. For complete product data, reference Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. Visit our web site at Customer First Center Highway South Peachtree City, A.. FAX.. / ADF

7 Submitted by raybar Electric Company, Inc. R-A-UNV-L-A/-/ -ER-U : FL X RASB- DESCRIPTION COOPER LIHTIN - METALUX The R is a T-dedicated lensed troffer designed to offer premium performance in a low profile housing. T dedication and optimized lamp to lens spacing provides the best in energy efficiency and optical control. The R s shallow, low profile housing is compatible with even highly restrictive plenums. Luminaires are compatible with today s popular ceiling systems. The R offers great performance and great quality. The series is an excellent choice for commercial offices, schools, hospitals, retail merchandising and many other applications. Catalog # Project Comments Prepared by Date SPECIFICATION FEATURES Construction Low profile recessed housing is die formed of code gauge prime cold rolled steel with full length stiffeners and mechanical endplate attachment for added strength. Ballast cover is easily removed without tools. Die formed captive lampholder bracket fully encloses lampholder wiring for easy lampholder replacement. Ample KOs are provided for continuous row wiring. Built-in grid-lock feature for safety and convenience. Electrical** Ballasts are CBM/ETL Class P and are positively secured. Pressure lock lampholders. UL/CUL listed. Suitable for damp locations. Finish Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibition. Lighting grade baked white enamel finish with premium reflectance for high efficiency. Hinging/Latching Positive cam action steel latches and integral safety hinges provide secure, high quality door fit and allow hinging and latching from either side. Frame/Shielding Heavy gauge flat steel door is die formed with reinforced mitered corners. Housing and door frame assemblies incorporate full length and width mechanical light traps. Light stabilized, acrylic prismatic lens. R ' X ' TROFFER LAMP eneral Purpose T Commercial Troffer -/" [mm] -/" [mm] ENERY DATA Input Watts: EB Ballast & STD Lamps () MOUNTIN DATA -/" [mm] /" [mm] K.O. () -/" [mm] LAMP CONFIURATIONS " [mm] Access Plate /" [mm] K.O. () -/" [mm] -/" [mm] -/" [mm] DOOR FRAMES R Flat, White Steel (White L atches) ES Ballast & STD Lamps () Luminaire Efficacy Rating LER = FL- R-A Yearly Cost of lumens, hrs at. KWH = $. *Standard (rid) Fixtures can be field converted by adding trim kits. See Compatibility Section or Consult Factory. -/" [mm] " [mm] -/" [mm] **Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. ***Order FCS-W-U Flange Kit for installation in drywall ceiling. See options and accessories compatibility section. CEILIN COMPATIBILITY rid/lay-in Standard Concealed T Slot rid F Flange Trim With Supporting Swing ates Ceiling Trim Exposed rid Concealed T Slot rid Flange *** (Verify compatibility/ consult factory.) LAMPS CONTAIN MERCURY. DISPOSE ACCORDIN TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. COOPER LIHTIN ADF

8 Submitted by raybar Electric Company, Inc. R-A-UNV-L-A/-/ -ER-U : FL X RASB- R PHOTOMETRICS Coefficients of Utilization Candlepower R-A Electronic Ballast FT/K lamps lumens (II). x mounting height, ( ). x Efficiency.% RA.IES LER = FL- Yearly Cost of lumens, hrs at. KWH = $. Effective floor cavity reflectance % rc % % % % % % rw Zonal Lumen Summary Typical VCP Percentages Height Along Height Across Zone Lumens %Lamp %Fixture Room Size (Ft.) x x x x x Angle Along II Across ORDERIN INFORMATION SAMPLE NUMBER: R-A-V-EB-U Width Blank= ' Width Trim =rid/lay-in (Standard) F=Flange Trim Number of Lamps = Lamps (Not included) Wattage =W T (") Series R=eneral Purpose T Commercial Troffer () Voltage () Shielding A=# Acrylic Pattern A=# Pattern Acrylic (." Thick) V= Volt V= Volt V= Volt UNV=Universal Voltage - () L=Single Element Fuse M=Double Element Fuse Lamps=Lamps Installed Flex=Flex Installed EL=Emergency Installed Ballast EB = T Electronic Start. Total Harmonic Distortion < % No. of Ballast, or EB /PLUS= T Electronic Start. No. of Ballast, or Total Harmonic Distortion < % High Ballast Factor >. ER =T Electronic Program Rapid Start. Total Harmonic Distortion < % No. of Ballast, or FR=Fire Label Packaging U=Unit Pack Accessories EQ=T-BAR Safety Earthquake Clips () FCS-XXW-U=Field Insatlled Flange Kit L = -series K lamp A/-/ = wire flex NOTES: () An EQ rid Clip is recommended for all /" ceiling systems. Four required per fixture. () Products also available in non-us voltages and frequencies for international markets. () Not available when specifying emergencies, voltage must be specific. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. SHIPPIN INFORMATION Catalog No. R-A Wt. lbs. Visit our web site at Customer First Center Highway South Peachtree City, A.. FAX.. / ADF

9 Submitted by raybar Electric Company, Inc. WN-A-UNV-ER-U Provided with series K lamps : FL WRAP RASB- Description COOPER LIHTIN - METALUX The WN Series is a specification wraparound luminaire featuring energy efficient performance. The luminaire's clean, low profile design is both appealing and functional. The WN Series utilizes a clear, low brightness, extruded acrylic refractor for high performance and aesthetics. The efficient and stylish WN Series is the perfect wraparound for schools, offices and other commercial and retail spaces. Catalog # Project Comments Date Prepared by Specification Features Construction Housing consists of die formed cold rolled steel. Ends formed with the housing for strength and provisions for continuous row aligners. Steel end plates with /" KO and light-seal embossment. Ballast cover easily removed without tools. Electrical* Ballasts are CBM/ETL Class "P" and are positively secured by mounting bolt. Rotor lock lampholders. UL/ CUL listed. Suitable for damp locations. Finish Multistage, prepaint ensures maximum bonding and rust prevention. Lens % clear acrylic prismatic lens. Sides have inside linear prisms and bottom has pyramidal prisms for low brightness control. -/" [mm] -/" [mm] WN T " [mm] ' Surface T Lamps Commercial Wrap Lamp Configurations Lens Removal -/" [mm] -/" [mm] -/" [mm] " [mm] -/" [mm] Mounting Data Energy Data ' -/" [mm] -/" [mm] -/" [mm] Ceiling Stand-Off Embossments round Screw Bump Input Watts: EB Ballast & STD Lamps T () () " [mm] -/" [mm] /" [mm] K.O. () -/" [mm] -/" [mm] " [mm] " [mm] -/" [mm] Luminaire Efficacy Rating LER = FW- WN-A Yearly Cost of lumens, hrs at. KWH = $. *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. LAMPS CONTAIN MERCURY. DISPOSE ACCORDIN TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADF -- ::

10 Submitted by raybar Electric Company, Inc. WN-A-UNV-ER-U Provided with series K lamps : FL WRAP RASB- WN T Photometrics Coefficients of U tilization Candela WN--EB -U Energy Saving Ballast FT/K Lamps Lumens (II). x mounting height, ( ). x Efficiency.% P LER = FW- Yearly Cost of lumens, hrs at. KWH = $. Effective floor cavity reflectance % rc % % % % % % rw Zonal Lumen Summary Ty pical VCP Percentages Height Along Height Across Zone Lumens %Lamp %Fixture Room Size (Ft.) x -.. x -.. x -.. x -.. x -.. Angle Along II Across Ordering Information SAMPLE NUMBER: W N-A-UNV- EB-U Length Blank=' Length Series () WN=Commercial Surface Wrap Number of Lamps () = Lamps (Not Included) Wattage T=W T (") () =W T (") Lens A=Acrylic Refractor/Lens Voltage () V= Volt V= Volt V= Volt UNV=Universal Voltage - () L=Single Element Fuse M=Double Element Fuse EL=Emergency Installed () Ballast () EB =T Electronic Instant Start. Total Harmonic Distortion < % No. of Ballast or EB /PLUS=T Electronic Instant Start. No. of Ballast or High Ballast Factor >.. Total Harmonic Distortion < % ER =T Electronic Program Rapid Start. Total Harmonic Distortion < % No. of Ballast or ER /PLUS=T Electronic Program Start. High Ballast Factor >.. No. of Total Harmonic Distortion < % Ballast or HPT Ballast Ballast HB L=T Electronic Instant Start. Low Ballast Factor. HB =T Electronic Instant Start. Ballast Factor. HB N=T Electronic Instant Start. Normal Ballast Factor. HB H=T Electronic Instant Start. High Ballast Factor.-. HR DIM=T Electronic Program Start Step Dimming. Ballast Factor. HR L=T Electronic Program Start. Low Ballast Factor. HR =T Electronic Program Start. Ballast Factor. HR H=T Electronic Program Start. High Ballast Factor.-. DEC=Decorative End Cap CRA=Continuous Row Aligner Packaging U=Unit Pack ACCESSORIES WN-LT-DEC-ENDS=Decorative End Caps - or Lamps ( pieces) WN-CRA=Continuous Row Aligner ( only) NOTES: () Steel endplates with /" KO standard for continuous row mounting. () Suspension mounting not recommended for lamp models. () Products also available in non-us voltage and freqeuncies for international markets. () Not Available when specifying emergencies, voltage must be specified. () A low profile battery pack is required for installation with standard ballast cover (consult Cooper Lighting). () When utilizing W T lamps, HPT Ballast must be specified. Other ballast restrictions may apply. Consult your Cooper Lighting Representative for availability and ordering information. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. SHIPPIN DATA Catalog No. WN-TA WN-A Wt. lbs. lbs. Specifications and dimensions subject to change without notice. Customer First Center Highway South Peachtree City, A.. FAX. ADF -- ::

11 Date: Nov, raybar Electric Company, Inc. th Avenue South Seattle WA Phone: () - Fax: () - Job Name Bid Date Nov, Submittal Date Nov,

12 FF raybar Electric Company, Inc. Page / Date: Nov, Page / Transmittal raybar Electric Company, Inc. th Avenue South Seattle WA Phone: () - From: Shawn Mitchell Project Location Contact: ATTACHED WE ARE SENDIN YOU COPIES OF THE FOLLOWIN ITEMS: Drawings Specifications Other: Prints Information Plans X Submittals THESE ARE TRANSMITTED FOR: Prior Approval Resubmittal for Approval Record X Approval Corrections Bids due on: Approval as Submitted Your Use Other: Approval as Noted Review and Comment MF Part LED X COOPER R LD A UNV FLEX L CD U FL X COOPER R UT A UNV FLEX LAMPS() EB U

13 Submitted by raybar Electric Company, Inc. R LD A UNV FLEX L CD U : LED X RASB- DESC RIPTION COOPER LIHTIN - METALUX R LED is a lensed troffer series. This high quality luminaire is dedicated to the latest solid state lighting and electronic driver technology for optimal performance and energy efficiency. The R LED is compatible with all of today s popular ceiling systems and is available with a number of options and accessories for application versatility. The R LED series features efficiency, quality and performance. The series is an excellent choice for commercial office spaces, schools, hospitals or retail merchandising areas. Catalog # Project Comments Prepared by Date SPEC IFIC ATION FEATURES Construction Rigid housing is die formed of code gauge prime cold rolled steel and features full length die-formed stiffeners and unibody endplate for added strength. Side flanges are hemmed. Innovative design provides superior lens brightness uniformity and visual comfort. Unibody endplates are securely attached with interlocking tabs and screws. Four auxiliary fixture end suspension points provided. ridlock feature for safety and convenience. Controls The R LED is equipped standard with a -V continuous dimming driver that works with any standard -V control/dimmer. Combine with energy-saving products like occupancy sensors, daylighting controls, and lighting relay panels from Cooper Controls ( to maximize energy savings. Electrical Long-Life LED system coupled with electrical driver to deliver optimal performance. LED s available in k or k with typical CRI. Projected life is, hours at % lumen output. culus listed. Electronic drivers are available for -V applications. A -V dimming driver is standard. Finish Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibition. Housing and driver cover finished with new % reflective white enamel for superior performance. PAF Painted After Fabrication option also available. Hinging/Latching Positive spring loaded steel latches with baked white enamel finish. Safety-lock T-hinges allow hinging and latching either side. Frame/Shielding Die formed, heavy gauge, flat steel door with reinforced mitered corners and baked white enamel finish. Flat and regressed aluminum doors also available. Positive light seals. Light stabilized, acrylic prismatic lens. Standard # pattern. Compliance Modules are UL recognized components and indoor luminaires are culus listed for ºC ambient environments, RoHS compliant, and LED modules comply with IESNA LM- and LM- standards. DesignLights TM Consortium Qualified. R LED ' X ' LED TROFFER eneral Recessed LED Troffer For Use in Insulated Ceilings -/" [mm] -/" [mm] MOUNTIN DATA DOOR FRAMES C CFA CRA Flat, White Flat, Extruded Deep, Regressed, Steel White Aluminum Extruded Natural Aluminum ENERY DATA Input Watts: =W =W -/" [mm] -/" [mm] C EILIN C OMPATIBILITY rid/lay-in Standard Concealed T Slot rid Ceiling Trim Exposed rid Concealed T Slot rid (Verify compatibility/ consult factory.) Safe and convenient means of disconnecting power. COOPER LIHTIN ADF

14 Submitted by raybar Electric Company, Inc. R LD A UNV FLEX L CD U : LED X RASB- PHOTOMETRIC S R LED R-LD--A-UNV- L-CD-U Dimming Driver Linear LED K (II). x mounting height, ( ). x Efficiency: % Lumens: Input Watts:.W Efficacy: LPW R-LD--A-UNV- L-CD-U.IES Candlep ower Angle Along II Across R-LD--A-UNV- L-CD-U Dimming Driver Linear LED K (II). x mounting height, ( ). x Efficiency: % Lumens: Input Watts:.W Efficacy: LPW R-LD--A-UNV- L-CD-U.IES Candlep ower Angle Along II Across C oeffic ien ts of Utiliza tion C oeffic ien ts of Utiliza tion Effective floor cavity reflectance % rc % % % % % % rw Effective floor cavity reflectance % rc % % % % % % rw Zonal Lum e n Summary Zone Lumens %Fixture Luminance Data Average Average Average Angle -Deg -Deg -Deg in Deg cd/sm cd/sm cd/sm Zonal Lum e n Summary Zone Lumens %Fixture Luminance Data Average Average Average Angle -Deg -Deg -Deg in Deg cd/sm cd/sm cd/sm ORDERIN INFORMATION SAMPLE NUMBER: R-LD--A-UNV-L-C D-U Rating Blank= Standard ATW-SW= Chicago Rated Width =' Width Trim ( ) =rid/lay-in (Standard) () =Concealed T =Slot rid Series R=eneral Purpose Troffer LED LD=LED. LED Lumens Output () = = Shielding A=A. A=A. AMIN=A. MIN A/=A. F=A. Frost F=A. Frost ND=No Door Voltage () UNV=Universal Voltage - () L=Single Element Fuse M=Double Element Fuse Flex=Flex Installed EL=Emergency Installed () CCT L=K L=K Driver CD=-V Dimming Driver Number of Drivers = Driver PAF=Painted After Fabrication =asket, Door Frame and Housing = plus asket between Lens and Door = and plus asketing on Mounting Surface of Fixture Trims A CCESSORIES EQ-CLIP-U=T-BAR Safety Earthquake Clips () DF--W=' x ' Drywall Frame Kit Packaging U=Unit Pack PALC=Palletized Fixtures In Carton Door Frame Standard=Flat White Steel Door (Leave Blank) FA=Flush White Extruded Aluminum c/w Spring Latch RA=Regressed White Extruded Aluminum FAN=Flush Natural Anodized Extruded Aluminum RAN=Regressed Natural Anodized Extruded Aluminum FAB=Flush Black Extruded Aluminum RAB=Regressed Black Extruded Aluminum NOTES: () An EQ rid Clip is recommended for all /" ceiling systems. () Products also available in non-us voltages and frequencies for international markets. () Not available when specifying emergencies, voltage must be specific. () Call factory. () Nominal lumen output. () DesignLights TM Consortium Qualified (high lumen only). Refer to Qualified Products List under Family Models for details. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. SHIPPIN INFORMATION Catalog No. Wt. R-LD- lbs. R-LD- lbs. Visit our web site at Customer First Center Highway South Peachtree City, A.. FAX.. / ADF

15 Submitted by raybar Electric Company, Inc. R UT A UNV FLEX LAMPS() EB U : FL X RASB- DESCRIPTION COOPER LIHTIN - METALUX The R is a T-dedicated lensed troffer designed to offer premium performance in a low profile housing. T dedication and optimized lamp to lens spacing provides the best in energy efficiency and optical control. The R s shallow, low profile housing is compatible with even highly restrictive plenums. Luminaires are compatible with today s popular ceiling systems.the R offers great performance and great quality. The series is an excellent choice for commercial offices, schools, hospitals, retail merchandising and many other applications. Catalog # Project Comments Prepared by Date SPECIFICATION FEATURES Construction Unitized low profile recessed housing is die formed of code gauge prime cold rolled steel with full length stiffeners and unibody endplate for added strength. Ballast cover is easily removed without tools. Die formed captive lampholder bracket fully encloses lampholder wiring for easy lampholder replacement. Ample KOs are provided for continuous row wiring. Built-in grid-lock feature for safety and convenience. Electrical** Ballasts are CBM/ETL Class P and are positively secured by mounting bolts. Rotor-lock T lampholders. Biaxial models use base lampholders with doubleedge wiping action pressure-lock contacts and horizontally oriented lamp support clips. UL/CUL listed. Suitable for damp locations. Finish Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibition. Lighting grade baked white enamel finish with premium reflectance for high efficiency. Hinging/Latching Positive spring loaded steel latches and safety lock T-hinges provide secure, high quality door fit and allow hinging and latching from either side. Frame/Shielding Heavy gauge flat steel door is die formed with reinforced mitered corners. Housing and door frame assemblies incorporate full width mechanical light traps. Light stabilized, acrylic prismatic lens. Controls Fifth Light ballast options are offered for both -V continuous dimming and DALI applications. Combine with energy-saving products like occupancy sensors, daylighting controls, and lighting relay panels from Cooper Controls ( to maximize energy savings. R UT, BX U-/, ' X ' TROFFER OR LAMPS -/" [mm] eneral Purpose T Commercial Troffer -/" [mm] MOUNTIN DATA BX, U-/,, -/" [mm] -/" [mm] LAMP CONFIURATIONS UT -/" [mm] X=-/" [mm] U-/ -/" [mm] " X " [mm] [mm] -/" [mm] -/" [mm] X=-/" [mm] Y=-/" [mm] -/" [mm] X Y X -/" [mm] ENERY DATA Input Watts: EB Ballast & STD Lamps (), U-/ (), UT () (), BX () ES Ballast & STD Lamps (), U-/ (), UT () (), BX () -/" [mm] UT -/" [mm] -/" [mm] -/" [mm] CEILIN COMPATIBILITY rid/lay-in Standard -/" [mm] " [mm] -/" [mm] -/" [mm] Concealed T Slot rid X=-/" [mm] DOOR FRAMES R Flat, White Steel ( White Latches) -/" [mm] -/" X X [mm] -/" [mm] F Flange Trim With Supporting Swing ates BX -/" [mm] X=/" [mm] -/" [mm] -/" [mm] " X [mm] X -/" [mm] Ceiling Exposed rid Concealed T Slot rid Flange Trim *** Luminaire Efficacy Rating LER = FL- R-UTA Yearly Cost of lumens, hrs at. KWH = $. *Standard (rid) Fixtures can be field converted by adding trim kits. See Compatibility Section or Consult Factory. **Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. ***When ordering Flange Kit for installation in drywall ceilings, see options and accessories compatibility section and ordering logic. LAMPS CONTAIN MERCURY. DISPOSE ACCORDIN TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. COOPER LIHTIN ADF

16 Submitted by raybar Electric Company, Inc. R UT A UNV FLEX LAMPS() EB U : FL X RASB- PHOTOMETRICS R Coefficients of Utilization Effective floor cavity reflectance % rc % % % % % % rw R-UTA Electronic Ballast () W UT lamps lumens (II). x mounting height, ( ). x Efficiency.% RUTA.IES LER = FL- Yearly Cost of lumens, hrs at. KWH = $. Candela Angle Along II Across Coefficients of Utilization Effective floor cavity reflectance % rc % % % % % % rw R-A Electronic Ballast () FT lamps lumens (II). x mounting height, ( ). x Efficiency.% R-A.IES LER = FL- Yearly Cost of lumens, hrs at. KWH = $. Candela Angle Along II Across Zonal Lumen Summary Zone Lumens %Lamp %Fixture Luminance Data Average Average Average Angle -Deg -Deg -Deg in Deg cd/sm cd/sm cd/sm Zonal Lumen Summary Zone Lumens %Lamp %Fixture Luminance Data Average Average Average Angle -Deg -Deg -Deg in Deg cd/sm cd/sm cd/sm Visit our web site at Customer First Center Highway South Peachtree City, A.. FAX.. / ADF

17 Submitted by raybar Electric Company, Inc. R UT A UNV FLEX LAMPS() EB U : FL X RASB- ORDERIN INFORMATION SAMPLE NUMBER: R-UTA-UNV-EB-U R Rating () Blank= Standard ATW-SW= Chicago Rated Width =' Width Trim =rid/lay-in (Standard) Series R=eneral Purpose T Commercial Troffer () Number of Lamps = Lamps = Lamps () (Not included) Wattage =W T (") UT=W (") () U-/=W T (") () BX=W Biaxial (") Voltage () V= Volt UNV=Universal Voltage - () L=Single Element Fuse M=Double Element Fuse Lamps=Lamps Installed Flex=Flex Installed EL=Emergency Installed Shielding A=# Acrylic Pattern A=# Pattern Acrylic (." Thick) A/=# Pattern Acrylic (." Thick) PBS=Silver Parabolic Louver Flanged (/" x /" x /") NOTES: () An EQ rid Clip is recommended for all /" ceiling systems. Four required per fixture. () Products also available in non-us voltages and frequencies for international markets. () Not available when specifying emergencies, voltage must be specific. () For NYC rated product, see separate specification sheets. () -Lamp configuration only available in W. () Not available in UNV voltages. Must specify voltage. () Ballast Factor is. for lamp W T fixtures. () Fifthlight ballast option not available. () For a complete listing of Fifthlight Technology products and other solutions from Cooper Controls, visit () -V ballast do not include DALI feature. Please select DALI ballast for use with Fifth Light system. () Specification grade -V dimming ballast are NEMA premium and CEE listed. They are compatible with low mercury and energy saving lamps. () Specification rade -V ballast not available for Biax lamps. () Specification rade -V ballast not offered in or -lamp versions. () Standard -V ballast not available for Biax lamps. () Standard -V ballast not offered in or -lamp versions For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. Single Ballast Ballast EB =T Electronic Start. Total Harmonic Distortion < % EB /PLUS= T Electronic Start. Total Harmonic Distortion < %. High Ballast Factor >.. ER = T Electronic Program Rapid Start. Total Harmonic Distortion < % EB =T Biax Electronic Instant Start. Total Harmonic Distortion < % () TEB =T Biax Electronic Instant Start. Total Harmonic Distortion < % () ER = T Biax Electronic Program Rapid Start. Total Harmonic Distortion < % High Performance T Ballasts HB =T Electronic Instant Start. Total Harmonic Distortion < %. Standard Ballast Factor.. HB L=T Electronic Instant Start. Total Harmonic Distortion < %. Low Ballast Factor.. HB N=T Electronic Instant Start. Total Harmonic Distortion < %. Normal Ballast Factor. HB H=T Electronic Instant Start. Total Harmonic Distortion < %. High Ballast Factor.. HR T Electronic Program Rapid Start. Total Harmonic Distortion < %. Standard Ballast Factor.. HR DIM=T Electronic Program Rapid Start. Total Harmonic Distortion < %. Step Dimming. Ballast Factor. HR L=T Electronic Program Rapid Start. Total Harmonic Distortion < %. Low Ballast Factor.. HR H=T Electronic Program Rapid Start. Total Harmonic Distortion < %. High Ballast Factor.. -V Dimming Ballasts () LTV =T -V Program Rapid Start. Total Harmonic Distortion < %. (), () Ballast Factor. LTVS =T -V Spec rade Program Rapid Start. Total Harmonic Distortion < (), (), () %. Ballast Factor. Fifth Light DALI Ballasts () LT =T DALI Program Rapid Start. Total Harmonic Distortion < %. Ballast Factor. LTB =T Biax DALI Program Rapid Start. Total Harmonic Distortion < %. Ballast Factor. FR=Fire Label Packaging U=Unit Pack ACCESSORIES EQ-CLIP-U=T-BAR Safety Earthquake Clips () FCTKA-W-U=Field Installed Flange Kit FCTK A Trim Kit Field Convertible Aluminum =' x ' =' x ' Blank=Single R=In Row E=End Row R W U N=Natural W=White U=Unit Pack Number of Ballasts = Ballast = Ballasts = Ballasts SHIPPIN INFORMATION Catalog No. R-A R-A R-UTA R-U-/A R-BXA Wt. lbs. lbs. lbs. lbs. lbs. Visit our web site at Customer First Center Highway South Peachtree City, A.. FAX.. / ADF