ATTACHMENT 1E - FIXTURE PRODUCT DATA REVISED PER ADDENDUM 1, AUGUST 10, Catalog # Project. Comments. Prepared by

Transcription

1 DESCRIPTION The Class E3 LED is a high quality architectural reccessed luminaire that offers subtle, clean lines and a fully luminous door-frame design. This affordable lighting solution offers the latest in solid state lighting and driver technology for optimal performance, energy efficiency and long life. The E3 LED has a hinged door frame design that provides tool-less and safe maintenance access into the luminaire from below. Available in 2x2 and 2x4 fixture sizes, the E3 LED is well suited for any architectural space including open offices, schools, hospitals and corridors. REVISED PER ADDENDUM 1, AUUST, 216 Catalog # Project Comments Prepared by Corelite Date SPECIFICATION FEATURES Construction Rigid housing is die formed of code gauge prime cold rolled steel and features full length die-formed stiffeners and unibody endplate for added strength. Side flanges are hemmed. Reflectors Precision tooled, high reflectance sheet metal which allows for easy access to the driver compartment. Frame/Sheilding Die formed, heavy gauge, flat steel door with reinforced mitered corners painted after fabrication, baked matte white enamel finish. Positive light seals. One-piece acrylic frosted lens with ribbed prismatic center element and smooth curved sides. Electrical Fixture equipped with proprietary s Cooper Lighting solid state light engines. LEDs are available in 3K, 3K or 4K with a typical CRI 8. Modules are coupled with high efficiency electronic LED drivers for optimal preformance. Standard drivers are - volt continuous dimming that work with any -V control/ dimmer; specify -STD in driver options. The E3 LED is Powered by Fifth Light with Digital Addressable Lighting Interface (DALI) drivers; specify -FLT in driver options. Hinging/Latching Positive cam action steel latches with baked white enamel finish. Safety-lock T-hinges allow hinging and latching from either side. Door assembly hinges down for easy access from below without tools. Mounting Standard flange design works with most lay-in ceiling types. Integral pryout tabs secure luminaire to ceiling grid from above. Fixture offers tie-in locations for tie-wire on all corners, consult local code for appropriate tiewire recommendations. Finish Fixture housings are high reflectance white using electrostatically applied polyester powder coat paint. Compliance Components are UL recognized and luminaires are culus listed for 2ºC ambient environments, damp location listed, and RoHS compliant. Life and Warranty reater than 8% lumen maintenance expected at 6, hours, based off LM-8 test data and TM-21 standards. Five-year warranty. CLASS E3 LED Frosted Prismatic Lens LED 2 x 4 Recessed 3-1/4 Depth 3-1/4" [83mm] 7" [178mm] 23-3/4" [63mm] 23-3/4" [63mm] 47-3/4" [1212mm] ORDERIN INFORMATION Sample Number: E3X-WL-3L3-1D-UNV-24-T1-STD-W6 Series Reflector Shielding Light Level (3K values shown) E3X Class E3 LED W White L Linear Prismatic Lens 1 Light Level 1 (3171 Lms, 32. W) (1) 2 Light Level 2 (434 Lms, 47.3 W) (1) 3 Light Level 3 (27 Lms, 7.6 W) 4 Light Level 4 (6766 Lms, 74.7 W) Light Level (8318 Lms, 9.8 W) Color Temperature L3 LED 3K L3 LED 3K L4 LED 4K Number of Circuits Wiring (4) 1 1 Circuit C Switched Circuit (2) D -V Dimming (2) E Emergency Circuit T Nightlight Circuit Y Daylight Circuit Input Voltage Size Ceiling Driver Options Options 12 12V V UNV Universal (12V-277V, /6 Hz) V (3) 24 2 x 4 T1 1 rid, Slot-rid, 9/16 Tegular CC Concealed Ceiling () SU Surface Mount (6) STD Standard -V LT Fiftht Light DALI NY New York City Construction CP Chicago Plenum W6 6 Whip Flex W12 12 Whip Flex NOTES: (1) Visual appearance between light level 1 and 2 may differ from all other light levels due to quantity of LED arrays used in parallel. (2) Dimming wires come standard with all fixtures. Control wires can be capped in the field for standard switched circuit operation. (3) 347V is achieved using a remote transformer. (4) Integral battery pack not available with this fixture. () CC option achieved with the Metalux DFW series drywall frame-in kit, ordered separately from Metalux. For 2x4, order Metalux part DF-24W-U. (6) SU option achieved with the Metalux Univeral Surface Mount Kit, ordered separately from Metalux. For 2x4, order Metalux part SK-24-WS. 1 of PS182EN 6/11/21

2 PHOTOMETRICS REVISED PER ADDENDUM 1, AUUST, 216 CLASS E3 LED 2x E3X-WL-3L3-1D- UNV-24 Linear LED 3K height, ( ) 1.4 x Lumens: 27 Input Watts: 7.6W Efficacy: 92 lm/w E3X-WL-3L3-1D- UNV-24.IES Can dlepo wer Angle Along II 4 Across Z o nal L umen S u mmar y Zone Lumens %Fixture Luminance Data Average Average Average Angle -Deg 4-Deg 9-Deg in Deg cd/sm cd/sm cd/sm Light Level 2x4 Class E3 LED Energy and Performance Data (3K) Wattage Delivered Efficacy Fluorescent Lumens (LPW) Equivalent Energy Savings THO 47% T / 2T8 2% T / 3T8 39% THO 3% THO 4% *Energy savings based upon standard lamp/ballast combinations using an equivalent E3 fluorescent luminaire. LUMEN MAINTENANCE Ambient Temperature TM-21 Lumen Maintenance (6, hours) Theoretical L7 (Hours) 2 C > 8% > 144, 181 East Colfax Avenue Aurora, CO 811 P: Specification and 2 of PS181EN 6/11/21

3 DESCRIPTION RLED is a recessed lensed troffer series which offers a high quality luminaire dedicated with the latest solid state lighting and electronic driver technology for optimal performance and energy efficiency. The RLED is compatible with all of today s popular ceiling systems and is available with a number of shielding options and accessories for application versatility. REVISED PER ADDENDUM 1, AUUST, 216 Catalog # Project Comments Metalux Date The RLED series features efficiency, quality and performance. The series is an excellent choice for commercial office spaces, schools, hospitals or retail merchandising areas. Prepared by SPECIFICATION FEATURES Construction Rigid housing is die formed of code gauge prime cold rolled steel and features full length die-formed stiffeners and unibody endplate for added strength. Side flanges are hemmed. Innovative design provides superior lens brightness uniformity and visual comfort. Unibody endplates are securely attached with interlocking tabs and screws. Four auxiliary fixture end suspension points provided. Endplates have integral rid-lock feature for safety and convenience. Controls The RLED is equipped standard with a -V continuous dimming driver that works with any standard -V control/dimmer. Combine with energy-saving products like occupancy sensors, daylighting controls, and lighting relay panels to maximize energy savings. Electrical Long-Life LED system coupled with electrical driver to deliver optimal performance. LED s available in 3K, 3K, 4K or K with typical CRI 8. Projected life is 6, hours at 9% lumen output. culus listed. Electronic drivers are available for V applications. A -V dimming driver is standard. Emergency Battery Pack Option Optional 12V-277V integral emergency battery pack is available in 7-watts or 14-watts to meet critical life-safety lighting requirements. The 9-minute batteries provide constant power to the LED system, ensuring codecompliance. A test switch/indicator button can be tested safely from the ground using a laser pointer, while the patented EZ Key prevents accidental discharge of the battery during construction. See ordering information for details. Finish Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibition. Housing and driver cover finished with new 9% reflective white enamel for superior performance. PAF Painted After Fabrication option also available. Hinging/Latching Positive spring loaded steel latches with baked white enamel finish. Safety-lock T-hinges allow hinging and latching either side. Frame/Optical Shielding Die formed, flat steel door with frost #12 pattern acrylic prismatic lens offering the balance of rigidity and light stability. Primary stocking skus come standard with robust -.12 lens. Compliance Modules are UL recognized components and indoor luminaires are culus listed for 2ºC ambient environments, RoHS compliant, and LED modules comply with IESNA LM-79 and LM-8 standards. DesignLights Consortium Qualified and classified for DLC Standard, refer to www. designlights.org for details. 24R LED LED 2' X 4' LED TROFFER eneral Recessed LED Troffer For Use in Insulated Ceilings 3-1/4" [83mm] WATTAE 23-3/4" [63mm] Lumens Package Wattage 3 27W MOUNTIN DATA 47-1/16" [1218mm] DOOR FRAMES C CFA CRA Flat, White Flat, Extruded Deep, Re gressed, Steel White Aluminum Extruded N atural Aluminum 34 32W 38 3W 42 37W 48 43W 23-3/4" [63mm] 6 1W 64 6W 72 63W 8 78W 47-3/4" [1212mm] 9 8W CEILIN COMPATIBILITY rid/lay-in Standard Concealed T Slot rid Ceiling Trim Exposed rid Concealed T Slot rid (Verify compatibility/ consult factory.) Safe and convenient means of disconnecting power 3 of ADF :2:4

4 PHOTOMETRICS R-LD4-48-F1- UNV-L83-U Dimming Driver Linear LED 3K height, ( ) 1.2 x Lumens: 4841 Input Watts: 43.7W Efficacy: 1.8 lm/w 24R-LD4-48-F1- UNV-L83-U.IES Coefficients of Utilization Effective floor cavity reflectance 2% Candlepower Angle Along II 4 Across rc 8% 7% % 3% % % rw RCR Zonal Lumen Summary REVISED PER ADDENDUM 1, AUUST, R-LD4-64-F1- UNV-L83-CD1-U Dimming Driver Linear LED 3K height, ( ) 1.2 x Lumens: 6398 Input Watts: 6.8W Efficacy:.2 lm/w 24R-LD4-64-F1- UNV-L83-CD1-U. IES Coefficients of Utilization Effective floor cavity reflectance 2% RLED Candlepower Angle Along II 4 Across rc 8% 7% % 3% % % rw RCR Zonal Lumen Summary Zone Lumens % Fixture Zone Lumens % Fixture ORDERIN INFORMATION SAMPLE NUMBER: 24R-LD4-48-F1-UNV-L83-CD1-U Rating Blank Standard ATW-SW4 Chicago Rated Width / Length 242' x 4' Trim rid/lay-in (Standard) (1) Concealed T Slot rid Series () Reneral Purpose Troffer LED LD4LED 4. LED Lumens Output () Stock MTO Shielding F1A12.12 HP (Standard) AA12.9 A12A12.12 A19/16#19 Pattern Acrylic (.16" Thick) Door Frame StandardFlat White Steel Door (Leave Blank) FAFlush White Extruded Aluminum c/w Spring Latch RARegressed White Extruded Aluminum FANFlush Natural Anodized Extruded Aluminum RANRegressed Natural Anodized Extruded Aluminum FABFlush Black Extruded Aluminum RABRegressed Black Extruded Aluminum Voltage (2) UNVUniversal Voltage (3) Options LSingle Element Fuse MDouble Element Fuse Emergency EL7W7-watt, 12V-277V emergency battery pack installed (4) EL14W14-watt 12V-277V emergency battery pack installed (4) TD2Bodine enerator Transfer Device (11) ETS2IOTA Emergency Transfer Switch (11) CCT L833K L833K L844K L8K Flex Multiple Configurations Available Driver CD-V Dimming Driver (% - % Dimming) HCD-V Dimming Driver (1% - % Dimming) () SDStep-Dim Driver (8) LTDFifth Light DALI Driver (% - % Dimming) (9) Number of Drivers 11 Driver 22 Drivers Options PAFPainted After Fabrication 1asket, Door Frame and Housing 21 plus asket between Lens and Door 31 and 2 plus asketing on Mounting Surface of (6), (7) Fixture Trims ACCESSORIES EQ-CLIP-UT-BAR Safety Earthquake Clips (1) DF-24-W2' x 4' Drywall Frame Kit Packaging UUnit Pack PALCPalletized Fixtures In Carton NOTES: (1) An EQ rid Clip is recommended for all 9/16" ceiling systems. (2) Products also available in non-us voltages and frequencies for international markets. (3) Not available when specifying emergencies, voltage must be specific. (4) With integral test switch/indicator/laser test. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack ( lm/w x 77 lumens). IES-format photometry for luminaire under emergency operation available. () Nominal lumen output. (6) asketing only available with aluminum door frame. (7) asketing minimum.12. (8) Step dimming (bi-level) 1 driver, 34, 38, 42, 48, 6, 64, 2 driver - 72 lumen models. (9) DALI available from 38-8 lumen models. (9) DesignLights Consortium Qualified and classified for DLC Standard, refer to for details. () HCD option not available with 64, 72, 8 and 9 lumen versions. (11) Used to transfer fixture to secondary power source for life-safety operation. When used with a dimming fixture, two devices are required to ensure control is disabled while operating under emergency power. Specifications & Consult your Representative for availability and ordering information. SHIPPIN DATA 1121 Highway 74 South Peachtree City, A 3269 P: Specifications and Catalog No. Wt. Pallet 24R-LD lbs R-LD lbs of ADF :2:4

5 REVISED PER ADDENDUM 1, AUUST, RLED ENERY AND PERFORMANCE DATA BY CATALO NUMBER Stock or MTO* Catalog Logic Delivered Lumens Watts Efficacy (LPW) MTO 24R-LD4-3-F1-UNV-L8XX-CD1-U MTO 24R-LD4-34-F1-UNV-L8XX-CD1-U Stock 24R-LD4-38-F1-UNV-L8XX-CD1-U MTO 24R-LD4-42-F1-UNV-L8XX-CD1-U Stock 24R-LD4-48-F1-UNV-L8XX-CD1-U MTO 24R-LD4-6-F1-UNV-L8XX-CD1-U Stock 24R-LD4-64-F1-UNV-L8XX-CD1-U MTO 24R-LD4-72-F1-UNV-L8XX-CD1-U MTO 24R-LD4-8-F1-UNV-L8XX-CD1-U MTO 24R-LD4-9-F1-UNV-L8XX-CD1-U *Stocked in both 3K and 4K. Made to order (MTO) requires a typical four week lead time Highway 74 South Peachtree City, A 3269 P: Specifications and of ADF :2:4