OpticaHP Series 2HP Series Accord Series Ovation Series. High Performance T8. Solutions

Transcription

1 OpticaHP Series HP Series Accord Series Ovation Series High Performance T8 Solutions

2 Introduction Enhanced Illumination. Lower Operating Costs Working today to reduce energy costs does not mean that the quality of the lighting has to be sacrificed. Metalux has combined the latest T8 lamp and ballast technology with the newest recessed architectural products that not only enhance the work environment but will lower operating and maintenance costs. The Accord TM, Ovation TM, OpticaHP and HP families provide exciting alternatives to traditional fluorescent recessed lighting products. Each family balances the lighting in the vertical and horizontal zones to give the space a softer, more comfortable feel. The combination of luminaire efficiency and a high performance T8 system allows the flexibility to meet a wide range of light levels with a two lamp system while providing significant reduction in energy usage. T8Index Product Introduction Product Comparison Retrofit Kit OpticaHP HP Ovation Accord

3 Accord TM Distributing light throughout the space, the Accord eliminates uneven distribution and makes the room feel comfortable and inviting. It s smooth curved surfaces and matte white finish provide a design that is attractive but subtle in application. OpticaHP Building on the Metalux Optica Series, the OpticaHP family combines a precision faceted blade design with new high efficient T8 technology to produce optimal performance and aesthetic styling. Ovation TM Carefully balanced design elements combine to provide an efficient and inviting high performance alternative to traditional general lighting. The Ovation utilizes a matte white indirect reflector and a perforated direct lamp shield to provide optimum brightness control. HP Precision formed white or semi-specular louver that creates a soft, even distribution while delivering high efficiency. The HP luminaire is compatible with all of today s popular ceiling systems and is available with a number of options and accessories for increased application versatility.

4 Product Comparison Maximizing Energy Savings High Performance T8 systems allow the flexibility to tune the light output and energy usage by changing the luminaire ballast factor to adapt to needed light levels and energy requirements within an application. Using fewer lamps will help reduce future maintenance and recycling costs. Combine HPT8 Step Dimming Ballasts with Cooper Control products for optimal energy savings. HPT8 Lamp Advantages Higher Lumens Longer Life Higher CRI Rating No Issues with Temperature or Dimming HPT8 Lamping Advantages (4', T8 Lamps) Watt Watt //3 Watt Standard High Performance Energy Saving Initial Lumens Lamp Life,+ 4,+ 4,+ Starting Temp. ( F) - 6 CRI >75 >8 >8 Emergency Yes Yes Limited Dimming Yes Yes Limited Advantages Reduced Energy Consumption Flexible Light Output* Instant and Program Start Designs Parabolic Comparison (3 Lamp vs. Lamp HPT8) Ballast Light Energy Ballast Factor Levels Savings HB8L, HR8L HB8, HR8.88 = HB8N. = HB8H, HR8H.5. *Also available with Step Dimming Ballasts for additional light output control. Standard Parabolic (3) W T8 Lamps, Fixtures Electronic Ballast (.87 Ballast Factor) 83 Watts per Fixture OpticaHP Parabolic () W T8 Lamps, Fixtures Electronic Ballast (. Ballast Factor) 6 Watts per Fixture IES* 6 Based on: Room Size: 5' x 3' Ceiling Height: ' Work Plane:.5' Reflectances: 8/5/ *IES recommends 3 footcandles in open office environments IES* Watts/Sq.ft. Horizontal Footcandles Vertical Footcandles Watts/Sq.ft. Horizontal Footcandles Vertical Footcandles

5 Standard Troffer (4) W T8 Lamps, Fixtures Electronic Ballast (.87 Ballast Factor) Watts per Fixture TM Accord () W T8 Lamps, Fixtures Electronic Ballast (. Ballast Factor) 77 Watts per Fixture 5 Based on: Room Size: 5' x 3' Ceiling Height: ' Work Plane:.5' Reflectances: 8/5/ 4.8 IES* *IES recommends 3 footcandles in open office environments..6 IES* 4 Watts/Sq.ft. Horizontal Footcandles Vertical Footcandles Watts/Sq.ft. Horizontal Footcandles Vertical Footcandles 3

6 Retrofit Kit OpticaHP Retrofit Kit The OpticaHP retrofit kit has been designed to balance performance and energy savings in an environmentally friendly solution. The kit not only offers a visual improvement over traditional parabolics, there will be significant savings from lowered energy consumption and reduced maintenance. The OpticaHP is readily available in unit packs and, in order to optimize savings and further reduce waste, the kits are also available in bulk pack configurations that are recommended for larger jobs. Key Advantages of the OpticaHP Retrofit Kit: Lower Energy Costs: Save up to 4% Compared to Standard 3-Lamp Parabolics Improved Lighting: Even Delivery of Light that Eliminates Shadows Less Waste: Reusing Existing Housing results in Less Handling and a Lower Disposal Cost Pre-Wired Kits: Avoids Additional Time & Expense of Field Wiring OpticaHP Retrofit Kit Installation. Install the Socket Track Flange.. Secure Ballast and Socket Tracks. 3. Attach Supply Wires to Quick Disconnect. 4

7 Lighting before OpticaHP Efficiency: 6.% Input Watts: 86 Lumens/Watt:.5.4 Vertical Illumination: :.5 Lamp Life:, hours CRI (Color Rendering Index): >75 Lighting with OpticaHP Efficiency: 87.6% Input Watts: 53 Lumens/Watt: 88.5 Vertical Illumination: :. Lamp Life: 4,+ hours CRI (Color Rendering Index): >8 SAMPLE NUMBER: OPRK--UNV-HB8L-4 =' Nominal Series OPRK=Optica HP Retrofit Kit Number of Lamps = lamps (Not Included) Wattage (Length) 7=7W T8 (4") =W T8 (48") T8=W T8 (48") () Voltage () V= Volt 77V=77 Volt 347V=347 Volt UNV=Universal Voltage -77 Ballast Type () HB8 L=T8 Electronic Instant Start. Low Ballast Factor >.7.77 HB8 =T8 Electronic Instant Start. HB8 N=T8 Electronic Instant Start. Normal Ballast Factor. HB8 H=T8 Electronic Instant Start. High Ballast Factor.5-. HR8 DIM=T8 Electronic Program Start Step Dimming. HR8 L=T8 Electronic Program Start. HR8 =T8 Electronic Program Start. HR8 H=T8 Electronic Program Start. High Ballast Factor.5-. B=Bulk Pack, Palletized (48" per Pallet) (4" 4 per Pallet) (For large jobs order Bulk Pack for maximum savings and reduced packaging waste) NOTES: () Products also available in non-us voltages and frequencies for international markets. Standard ballast configurations also available. () When utilizing W T8 lamps, must be specified. For complete product data, go to Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. 4. Insert Reflector and attach to Socket Tracks (install lamps). 5. Position Louver Hinges into Existing Slots. 6. Secure Louver by engaging Spring Latches. 5

8 OpticaHP OpticaHP ' x 4' Photometrics Coefficients of Utilization Candela OPG--UNV Electronic Ballast () FT8 W lamps 3 lumens Spacing criterion: (II). x mounting height, ( ).4 x mounting height Efficiency = 87.% Test Report: OPG-FB6W.IES LER = FP-84 Yearly Cost of lumens, 3 hrs at.8 KWH = $.86 Effective floor cavity reflectance % rc 8% 7% 5% 3% % % rw RCR Zonal Lumen Summary Typical VCP Percentages Zone Lumens %Lamp %Fixture Height Along Height Across Room Size (Ft.) x 3 x 3 3 x 6 6 x 3 6 x Angle Along II 45 Across Illuminance Estimator Choose the spacing and ballast factor to determine the average footcandle and watts per square foot values. All calculations are based on the published IESNA Zonal Cavity Method and associated algorithms. Results are calculated from the content of the manufacturer s photometric files. Illuminance Levels (FC) & Watts Per Sq. Ft. (LPD) Based on ft. x ft. Open Room Ballast Factor FC LPD FC LPD FC LPD FC LPD 8' x ' ' x ' ' x ' OPG-FB6W Fixture Spacing SAMPLE NUMBER: OPG-FB6W-UNV-HB8-U Rating Blank= Standard =' OP=Optica HP Series Trim Type G=Grid/Lay-in (Standard) (6) F=Aluminum Flange Trim (7) MZ=Modular Trim Number of Lamps = Lamps Wattage (Length) T8=W T8 (48") (4) =W T8 (48") Cross Blade FB=Faceted Blade Cell Configuration 6= Rows of 6, Cell Louver Finish W=Matte White Option Aluminum Flange Trim (7) Blank=SW (Single White) Type Color S Single N Natural R In Row W White E End of Row Voltage () V= Volt 77V=77 Volt 347V=347 Volt UNV=Universal Voltage -77 (3) GL=Single Element Fuse GM=Double Element Fuse Flex=Flex Installed (Reference Flex ordering information) EL=Emergency Installed (5) Lamps Installed (8) Blank=No Lamps Installed L88=T8 Lamp, W and W, K (4) L884=T8 Lamp, W and W, 4K (4) L88HL=T8 Lamp, W, K, 3 Lumens L884HL=T8 Lamp, W, 4K, 3 Lumens Ballast Type () R=Internal Reflector HB8 L=T8 Electronic Instant Start. HB8 =T8 Electronic Instant Start. HB8 N=T8 Electronic Instant Start. Normal Ballast Factor. HB8 H=T8 Electronic Instant Start. High Ballast Factor.5-. HR8 DIM=T8 Electronic Program Start Step Dimming. HR8 L=T8 Electronic Program Start. HR8 =T8 Electronic Program Start. HR8 H=T8 Electronic Program Start. High Ballast Factor.5-. ACCESSORIES PAL=Job Pack, out of carton PALC=Job Pack, in carton EQ-CLIP-U=T-BAR Safety Earthquake Clips () NOTES: () An EQ Grid Clip is recommended for all /6" ceiling systems. Four required per fixture. () Products also available in non-us voltages and frequencies for international markets. Standard ballast configurations also available. (3) Not available when specifying emergencies, voltage must be specific. (4) When utilizing W T8 lamps, must be specified. (5) Fixtures equipped with EL option may require a 5-/" housing depth. If installing in field, must use low profile battery pack. (6) Louver is recessd by 5/6" in Concealed T or Slot Grid. (7) Specify row configuration, type in catalog number when ordering complete fixture. (8) Other lamp options available. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. 6

9 OpticaHP ' x ' Photometrics Coefficients of Utilization Candela OPG-7FBMW- UNV-EB8-U Electronic Ballast () F7T8 7W lamps 45 lumens Spacing criterion: (II). x mounting height, ( ).4 x mounting height Efficiency = 8.5% Test Report: OPG-7FBMW.IES LER = FP-65 Yearly Cost of lumens, 3 hrs at.8 KWH = $3.6 Effective floor cavity reflectance % rc 8% 7% 5% 3% % % rw RCR Zonal Lumen Summary Zone Lumens %Lamp %Fixture Luminance Data Average Average Average Angle -Deg 45-Deg -Deg In Deg cd/sm cd/sm cd/sm Angle Along II 45 Across SAMPLE NUMBER: OPG-7FBW-UNV-HB8-U Rating Blank= Standard =' OP=Optica HP Series Trim Type G=Grid/Lay-in (Standard) (6) F=Aluminum Flange Trim (5) MZ=Modular Trim Number of Lamps = Lamps Wattage (Length) 7=7W T8 (4") U-5/8=3W T8 (4") Cross Blade FB=Faceted Blade Cell Configuration = Rows of 3, 6 Cell Louver Finish W=Matte White Option Aluminum Flange Trim (5) Blank=SW (Single White) Type Color S Single N Natural R In Row W White E End of Row Voltage () V= Volt 77V=77 Volt 347V=347 Volt UNV=Universal Voltage -77 (3) GL=Single Element Fuse GM=Double Element Fuse WTR=White Reveal Flex=Flex Installed (Reference Flex ordering information) EL=Emergency Installed (4) Lamps Installed (7) L88=T8 Lamp, 7W, K L884=T8 Lamp, 7W, 4K Ballast Type () R=Internal Reflector HB8 L=T8 Electronic Instant Start. (Not available for U-5/8 lamp) HB8 =T8 Electronic Instant Start. HB8 N=T8 Electronic Instant Start. Normal Ballast Factor. HB8 H=T8 Electronic Instant Start. High Ballast Factor.5-. HR8 DIM=T8 Electronic Program Start Step Dimming. HR8 L=T8 Electronic Program Start. HR8 =T8 Electronic Program Start. HR8 H=T8 Electronic Program Start. High Ballast Factor.5-. ACCESSORIES PAL=Job Pack, out of carton PALC=Job Pack, in carton EQ-CLIP-U=T-BAR Safety Earthquake Clips () NOTES: () An EQ Grid Clip is recommended for all /6" ceiling systems. Four required per fixture. () Products also available in non-us voltages and frequencies for international markets. Standard ballast configurations also available. (3) Not available when specifying emergencies, voltage must be specific. (4) Fixtures equipped with EL option may require a 5-/" housing depth. If installing in field, must use low profile battery pack. (5) Specify row configuration, type in catalog number when ordering complete fixture. (6) Louver is recessed by 5/6" in Concealed T or Slot Grid. (7) Other lamp options available. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. 7

10 HP HP ' x 4' Photometrics Coefficients of Utilization Candela HP-W6P Electronic Ballast () FT8/84 lamps 5 lumens Spacing criterion: (II). x mounting height, ( ).4 x mounting height Efficiency = 84.8% Test Report: HP-W6P.IES LER = FP-7 Yearly Cost of lumens, 3 hrs at.8 KWH = $3.4 Effective floor cavity reflectance % rc 8% 7% 5% 3% % % rw RCR Zonal Lumen Summary Zone Lumens %Lamp %Fixture Luminance Data Average Average Average Angle -Deg 45-Deg -Deg In Deg cd/sm cd/sm cd/sm Angle Along II 45 Across Illuminance Estimator Choose the spacing and ballast factor to determine the average footcandle and watts per square foot values. All calculations are based on the published IESNA Zonal Cavity Method and associated algorithms. Results are calculated from the content of the manufacturer s photometric files. Illuminance Levels (FC) & Watts Per Sq. Ft. (LPD) HPGX-W6P Based on ft. x ft. Open Room Fixture Spacing Ballast Factor FC LPD FC LPD FC LPD FC LPD 8' x ' ' x ' ' x ' SAMPLE NUMBER: HPGX-W6P-UNV-HB8H-U Rating Blank= Standard NY=New York City Rated ATW-SW4= Chicago Rated HR=Heat Removal () =' H=High Performance P=Paralux Louver =" Louver Depth Trim Type G=Grid/Lay-in (Standard) G or T=Concealed T G or T=Slot Grid () F=Aluminum Flange Trim (5) MZ=Modular Trim AX=Air Supply Floating Louver X=Blank Side/Floating Louver - Non-Air Supply (Omit A) AVX=Air Supply Floating Louver with Directional Air Vane (Add V) Number of Lamps or 3 lamps Wattage (Length) T8=W T8 (48") (5) =W T8 (48") Louver Color W=White (Standard) S=Silver Cell Configuration 6= Rows of 6, Cell (' x 4') 36=3 Rows of 6, 8 Cell (' x 4') Louver Finish P=Painted White (Standard) I=Semi-Specular/Haze (Low Iridescent) (Silver Only) Option Aluminum Flange Trim (7) Blank=SW (Single White) Type Color S Single N Natural R In Row W White E End of Row Voltage (3) V= Volt 77V=77 Volt 347V=347 Volt UNV=Universal Voltage -77 (4) GL=Single Element Fuse GM=Double Element Fuse WTR=White Reveal Flex=Flex Installed (Reference Flex ordering information) EL=Emergency Installed (6) Lamps Installed (8) Blank=No Lamps Installed L88=T8 Lamp, W and W, K (5) L884=T8 Lamp, W and W, 4K (5) L88HL=T8 Lamp, W, K, 3 Lumens L884HL=T8 Lamp, W, 4K, 3 Lumens Ballast Type (3) HB8 L=T8 Electronic Instant Start. HB8 =T8 Electronic Instant Start. HB8 N=T8 Electronic Instant Start. Normal Ballast Factor. HB8 H=T8 Electronic Instant Start. High Ballast Factor.5-. HR8 DIM=T8 Electronic Program Start Step Dimming. Ballast Factor.88 HR8 L=T8 Electronic Program Start. HR8 =T8 Electronic Program Start. HR8 H=T8 Electronic Program Start. High Ballast Factor.5-. RIF=Radio Interference Suppressor GA/REP= Gauge Riveted Endplates. For use in New York City. RLS=Rotor-Lock Socket (T8 Lamps Only) (Additional options available) ACCESSORIES PAL=Job Pack, out of carton PALC=Job Pack, in carton EQ-CLIP-U=T-BAR Safety Earthquake Clips () NOTES: () Integral end plate grid lock feature not available in heat removal. () An EQ Grid Clip is recommended for all /6" ceiling systems. Four required per fixture. (3) Products also available in non-us voltages and frequencies for international markets. Standard ballast configurations also available. (4) Not available when specifying emergencies, voltage must be specific. (5) When utilizing W T8 lamps, must be specified. (6) Fixtures equipped with EL option may require a 5-/" housing depth. If installing in field, must use low profile battery pack. (7) Specify row configuration, type in catalog number when ordering complete fixture. (8) Other lamp options available. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. 8

11 HP ' x ' Photometrics Coefficients of Utilization Candela HP-7WP Electronic Ballast () F7T8/TL8 lamps 45 lumens Spacing criterion: (II). x mounting height, ( ).3 x mounting height Efficiency = 8.% Test Report: HP-7WP.IES LER = FP67 Yearly Cost of lumens, 3 hrs at.8 KWH = $3.58 Effective floor cavity reflectance % rc 8% 7% 5% 3% % % rw RCR Zonal Lumen Summary Zone Lumens %Lamp %Fixture Luminance Data Average Average Average Angle -Deg 45-Deg -Deg In Deg cd/sm cd/sm cd/sm Angle Along II 45 Across SAMPLE NUMBER: HPGX-7WP-UNV-HB8H-U Rating Blank= Standard NY=New York City Rated ATW-SW4= Chicago Rated HR=Heat Removal () =' H=High Performance P=Paralux Louver =" Louver Depth Trim Type G=Grid/Lay-in (Standard) G or T=Concealed T G or T=Slot Grid () F=Aluminum Flange Trim (5) MZ=Modular Trim AX=Air Supply Floating Louver X=Blank Side/Floating Louver - Non-Air Supply (Omit A) AVX=Air Supply Floating Louver with Directional Air Vane (Add V) Number of Lamps lamps Wattage (Length) 7=7W T8 (4") U-5/8=3W T8 (4") Louver Color W=White (Standard) S=Silver Cell Configuration = Rows of 3, 6 Cell (' x ') =3 Rows of 3, Cell (' x ') Louver Finish P=Painted White (Standard) I=Semi-Specular/Haze (Low Iridescent) (Silver Only) Option Aluminum Flange Trim (5) Blank=SW (Single White) Type Color S Single N Natural R In Row W White E End of Row Voltage (3) V= Volt 77V=77 Volt 347V=347 Volt UNV=Universal Voltage -77 (4) GL=Single Element Fuse GM=Double Element Fuse WTR=White Reveal Flex=Flex Installed (Reference Flex ordering information) EL=Emergency Installed (6) Lamps Installed (7) Blank=No Lamps Installed L88=T8 Lamp, 7W, K L884=T8 Lamp, 7W, 4K Ballast Type (3) HB8 L=T8 Electronic Instant Start. HB8 =T8 Electronic Instant Start. HB8 N=T8 Electronic Instant Start. Normal Ballast Factor. HB8 H=T8 Electronic Instant Start. High Ballast Factor.5-. HR8 DIM=T8 Electronic Program Start Step Dimming. HR8 L=T8 Electronic Program Start. HR8 =T8 Electronic Program Start. HR8 H=T8 Electronic Program Start. High Ballast Factor.5-. RIF=Radio Interference Suppressor GA/REP= Gauge Riveted Endplates. For use in New York City. RLS=Rotor-Lock Socket (T8 Lamps Only) (Additional options available) ACCESSORIES EQ-CLIP-U=T-BAR Safety Earthquake Clips () PAL=Job Pack, out of carton PALC=Job Pack, in carton NOTES: () Integral end plate grid lock feature not available in heat removal. () An EQ Grid Clip is recommended for all /6" ceiling systems. Four required per fixture. (3) Products also available in non-us voltages and frequencies for international markets. Standard ballast configurations also available. (4) Not available when specifying emergencies, voltage must be specific. (5) Specify row configuration, type in catalog number when ordering complete fixture. (6) Fixtures equipped with EL option may require a 5-/" housing depth. If installing in field, must use low profile battery pack. (7) Other lamp options available. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information.

12 Ovation Ovation ' x 4' Photometrics Coefficients of Utilization Candela RDI-RP Electronic Ballast () F/83/XP3 lamps 3 lumens Spacing criterion: (II). x mounting height, ( ).4 x mounting height Efficiency = 7.7% Test Report: RDIRP.IES LER = FL6 Yearly Cost of lumens, 3 hrs at.8 KWH = $3.3 Effective floor cavity reflectance % rc 8% 7% 5% 3% % % rw RCR Zonal Lumen Summary Zone Lumens %Lamp %Fixture Luminance Data Average Average Average Angle -Deg 45-Deg -Deg in Deg cd/sm cd/sm cd/sm Angle Along II 45 Across Illuminance Estimator Choose the spacing and ballast factor to determine the average footcandle and watts per square foot values. All calculations are based on the published IESNA Zonal Cavity Method and associated algorithms. Results are calculated from the content of the manufacturer s photometric files. RDI-RP Fixture Spacing Illuminance Levels (FC) & Watts Per Sq. Ft. (LPD) Based on ft. x ft. Open Room Ballast Factor FC LPD FC LPD FC LPD FC LPD 8' x ' ' x ' ' x ' SAMPLE NUMBER: RDI-RP-UNV-HB8-U =' Series RDI=Ovation Series (Recessed Direct/Indirect) Trim Type Leave Blank=Grid/Lay-in (Standard) Lamp Position Leave Blank=Center Mounted Lamps (Standard) S=Side Mounted Lamps ASY=Asymmetric Number of Lamps = Lamp = Lamp 3=3 Lamp Wattage T8=W T8 (48") (7) =W T8 (48") Lamp Shield X=Solid Matte White RP=Round Perforated White Steel RP/TBW=Round Perforated White Steel w/thin Blade White Baffle () RP/PLI=Round Perforated White Steel w/semi-specular Parabolic Baffle () RP/PLMI=Round Perforated White Steel w/specular Parabolic Baffle () RPD=Round Perforated Steel Below Ceiling Lamp Shield (4) RPD/TBW=Round Perforated Steel Below Ceiling Lamp Shield w/thin Blade White Baffle FLS=Frosted Lamp Shield () SLS=Split Lamp Shield () Debris Shield (5) /DS=Debris Shield Voltage () V= Volt 77V=77 Volt 347V=347 Volt UNV=Universal Voltage -77 (3) GL=Single Element Fuse GM=Double Element Fuse Flex=Flex Installed EL=Emergency Installed Lamps Installed (6) Blank=No Lamps Installed L88=T8 Lamp, W and W, K (7) L884=T8 Lamp, W and W, 4K (7) L88HL=T8 Lamp, W, K, 3 Lumens L884HL=T8 Lamp, W, 4K, 3 Lumens Ballast Type () HB8 L=T8 Electronic Instant Start. HB8 =T8 Electronic Instant Start. HB8 N=T8 Electronic Instant Start. Normal Ballast Factor. HB8 H=T8 Electronic Instant Start. High Ballast Factor.5-. HR8 DIM=T8 Electronic Program Start Step Dimming. HR8 L=T8 Electronic Program Start. HR8 =T8 Electronic Program Start. HR8 H=T8 Electronic Program Start. High Ballast Factor.5-. NOTES: () ' x ' and ' x 4' Center Lamp Shield models only. () Products also available in non-us voltages and frequencies for international markets. Standard ballast configurations also available. (3) Not available when specifying emergencies, voltage must be specific. (4) Not available with emergency battery pack. (5) Only compatible with X, FLS and RP lamp shields. (6) Other lamp options available. (7) When utilizing W T8 lamps, must be specified. (8) An EQ Grid Clip is recommended for all /6" ceiling systems. Four required per fixture. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. RLS=Rotor-Lock Socket (T8 Lamps Only) RIF=Radio Interference Suppressor REP=Riveted Endplates LSC=Lamp Shield Cable ST=Semi-Specular Tannenbaum (other options available) PALC=Palletized Fixtures in Carton ACCESSORIES EQ=T-BAR Safety Earthquake Clips (8) DF-4-W=Drywall Frame Kit (Order Individually as Accessory)

13 Ovation ' x ' Photometrics Coefficients of Utilization Candela RDI-7RP Electronic Ballast () FO7/K lamps 3 lumens Spacing criterion: (II).3 x mounting height, ( ).4 x mounting height Efficiency = 64.6% Test Report: RDI7RP.IES LER = FP Yearly Cost of lumens, 3 hrs at.8 KWH = $ Effective floor cavity reflectance % rc 8% 7% 5% 3% % % rw RCR Zonal Lumen Summary Zone Lumens %Lamp %Fixture Luminance Data Average Average Average Angle -Deg 45-Deg -Deg in Deg cd/sm cd/sm cd/sm Angle Along II 45 Across SAMPLE NUMBER: RDI-7RP-UNV-HB8-U =' Series RDI=Ovation Series (Recessed Direct/Indirect) Trim Type Leave Blank=Grid/Lay-in (Standard) Lamp Position Leave Blank=Center Mounted Lamps (Standard) S=Side Mounted Lamps ASY=Asymmetric Number of Lamps = Lamp = Lamp 3=3 Lamp Wattage 7=7W T8 (4") Lamp Shield X=Solid Matte White RP=Round Perforated White Steel RP/TBW=Round Perforated White Steel w/thin Blade White Baffle () RP/PLI=Round Perforated White Steel w/semi-specular Parabolic Baffle () RP/PLMI=Round Perforated White Steel w/specular Parabolic Baffle () RPD=Round Perforated Steel Below Ceiling Lamp Shield (4) RPD/TBW=Round Perforated Steel Below Ceiling Lamp Shield w/thin Blade White Baffle FLS=Frosted Lamp Shield () SLS=Split Lamp Shield () Debris Shield (5) /DS=Debris Shield Voltage () V= Volt 77V=77 Volt 347V=347 Volt UNV=Universal Voltage -77 (3) GL=Single Element Fuse GM=Double Element Fuse Flex=Flex Installed EL=Emergency Installed Lamps Installed (6) L88=T8 Lamp, 7W and W, K L884=T8 Lamp, 7W and W, 4K Ballast Type () HB8 L=T8 Electronic Instant Start. HB8 =T8 Electronic Instant Start. HB8 N=T8 Electronic Instant Start. Normal Ballast Factor. HB8 H=T8 Electronic Instant Start. High Ballast Factor.5-. HR8 DIM=T8 Electronic Program Start Step Dimming. HR8 L=T8 Electronic Program Start. HR8 =T8 Electronic Program Start. HR8 H=T8 Electronic Program Start. High Ballast Factor.5-. NOTES: () ' x ' and ' x 4' Center Lamp Shield models only. () Products also available in non-us voltages and frequencies for international markets. Standard ballast configurations also available. (3) Not available when specifying emergencies, voltage must be specific. (4) Not available with emergency battery pack. (5) Only compatible with X, FLS and RP lamp shields. (6) Other lamp options available. (7) An EQ Grid Clip is recommended for all /6" ceiling systems. Four required per fixture. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. RLS=Rotor-Lock Socket (T8 Lamps Only) RIF=Radio Interference Suppressor REP=Riveted Endplates LSC=Lamp Shield Cable ST=Semi-Specular Tannenbaum (other options available) PALC=Palletized Fixtures in Carton ACCESSORIES EQ=T-BAR Safety Earthquake Clips (7) DF--W=Drywall Frame Kit (Order Individually as Accessory)

14 Accord Accord ' x 4' Photometrics Coefficients of Utilization Candela AC--UNV-EB8 Electronic Ballast () FT8/8 Lamps 3 Lumens each Spacing criterion: (II).3 x mounting height, ( ).5 x mounting height Efficiency 84.% Test Report: AC--UNV-EB8.IES LER = FL8 LPW Yearly Cost of lumens, 3 hrs at.8 KWH = $. Effective floor cavity reflectance % rc 8% 7% 5% 3% % % rw RCR Zonal Lumen Summary Zone Lumens %Lamp %Fixture Luminance Data Average Average Average Angle -Deg 45-Deg -Deg In Deg cd/sm cd/sm cd/sm Angle Along II 45 Across Illuminance Estimator Choose the spacing and ballast factor to determine the average footcandle and watts per square foot values. All calculations are based on the published IESNA Zonal Cavity Method and associated algorithms. Results are calculated from the content of the manufacturer s photometric files. Illuminance Levels (FC) & Watts Per Sq. Ft. (LPD) Based on ft. x ft. Open Room Ballast Factor FC LPD FC LPD FC LPD FC LPD 8' x ' ' x ' ' x ' AC- Fixture Spacing SAMPLE NUMBER: AC--UNV-HB8-U Rating Blank= Standard NY=New York Rated ATW-SW4= Chicago Rated =' Series AC=Accord Series Type A=Air (optional) Number of Lamps (Not included) = Lamp Wattage (Length) T8=W T8 (48") (3) =W T8 (48") Shielding Blank=Frosted Acrylic SQP=Lens with Square Pattern Insert RDP=Lens with Round Pattern Insert Voltage () UNV=Universal Voltage -77 GL=Single Element Fuse GM=Double Element Fuse Flex=Flex installed EL=Emergency Installed Lamps () L88=T8 Lamp, W and W, K (3) L884=T8 Lamp, W and W, 4K (3) L88HL=T8 Lamp, W, K, 3 Lumens L884HL=T8 Lamp, W, 4K, 3 Lumens Ballast Type () HB8 L=T8 Electronic Instant Start. PALC=Job Pack, in carton HB8 =T8 Electronic Instant Start. HB8 N=T8 Electronic Instant Start. Normal Ballast Factor. HB8 H=T8 Electronic Instant Start. High Ballast Factor.5-. HR8 DIM=T8 Electronic Program Start Step Dimming. HR8 L=T8 Electronic Program Start. HR8 =T8 Electronic Program Start. HR8 H=T8 Electronic Program Start. High Ballast Factor.5-. NOTES: () Products also available in non-us voltages and frequencies for international markets. Standard ballast configurations also available. () Other lamp options available. (3) When utilizing W T8 lamps, must be specified. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information.

15 Accord ' x ' Photometrics Coefficients of Utilization Candela AC-7 Electronic Ballast () F7T8/TL84 lamps 4 lumens Spacing criterion: (II). x mounting height, ( ).4 x mounting height Efficiency 84.3% Test Report: AC-7.IES LER = FL-6 LPW Yearly Cost of lumens, 3 hrs at.8 KWH = $3.47 Effective floor cavity reflectance % rc 8% 7% 5% 3% % % rw RCR Zonal Lumen Summary Zone Lumens %Lamp %Fixture Luminance Data Average Average Average Angle -Deg 45-Deg -Deg In Deg cd/sm cd/sm cd/sm Angle Along II 45 Across SAMPLE NUMBER: AC-7-UNV-HB8-U Rating Blank= Standard NY=New York Rated ATW-SW4= Chicago Rated =' Series AC=Accord Series Type A=Air (optional) Number of Lamps (Not included) = Lamp Wattage (Length) 7=7W T8 (4") Shielding Blank=Frosted Acrylic SQP=Lens with Square Pattern Insert RDP=Lens with Round Pattern Insert Voltage () UNV=Universal Voltage -77 GL=Single Element Fuse GM=Double Element Fuse Flex=Flex installed EL=Emergency Installed Lamps () L88=T8 Lamp, 7W, K L884=T8 Lamp, 7W, 4K Ballast Type () HB8 L=T8 Electronic Instant Start. PALC=Job Pack, in carton HB8 =T8 Electronic Instant Start. HB8 N=T8 Electronic Instant Start. Normal Ballast Factor. HB8 H=T8 Electronic Instant Start. High Ballast Factor.5-. HR8 DIM=T8 Electronic Program Start Step Dimming. HR8 L=T8 Electronic Program Start. HR8 =T8 Electronic Program Start. HR8 H=T8 Electronic Program Start. High Ballast Factor.5-. NOTES: () Products also available in non-us voltages and frequencies for international markets. Standard ballast configurations also available. () Other lamp options available. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. 3

16 Cooper Lighting, LLC. Customer First Center Highway 74 South Peachtree City, GA 6 P: F: International Sales, USA Cooper Lighting, LLC. Highway 74 South Peachtree City, GA 6 P: F: Canada Cooper Lighting, LLC. 5 McLaughlin Road Mississauga, Ontario L5R B8 P: F: The Cooper Lighting Family Halo Metalux Lumark Sure-Lites Neo-Ray Corelite Portfolio Iris Shaper io Lumière Invue McGraw-Edison Streetworks Fail-Safe PDS MWS RSA Ametrix Domestic Facilities Cranbury, New Jersey Elk Grove Village, Illinois Irving, Texas Ontario, California Peachtree City, Georgia Canadian Facility Calgary, Alberta TE 7V Mississauga, Ontario L5R B8 Cooper Lighting and Metalux are valuable trademarks of Cooper Industries in the United States and other countries. You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries. Cooper Industries plc 6 Travis, Ste. 56 Houston, TX 77- P: ADF Printed in USA