SUBMITTAL TRANSMITTAL OCPS CLAY SPRINGS ES REVIEWED SUBMITTAL NUMBER: SUBMITTAL DETAILS: CONTRACTOR/CM:

Transcription

1 OCPS CLAY SPRINGS ES SUBMITTAL DETAILS: SUBJECT: PLUMBING FIXTURES AND TRIM BUILDING REFERENCE: DATE RECIEVED: Oct 21, 2014 DISCIPLINE: Plumbing PRIORITY STATUS: 2-STANDARD SPECIFICATION REF: REVIEWER DUE DATE: 10/31/2014 DWG REF. NONE DWG TITLE: RETURNED ITEMS: NO OF ITEMS: ITEM DESCRIPTI CONTRACTOR/CM: SUBMITTAL TRANSMITTAL SUBMITTAL NUMBER: : WILLIAMS COMPANY : BRAD KUBIN 2301 SILVER STAR RD. ORLANDO, FL, (407) FAX:(407) DATE RETURNED TO CM: 10/23/ Product Literature(s) REVIEW STATUS: REVIEWED REVIEWERS: PRIMARY: SECONDARY: TAD RIVENBARK MATERN ENGINEERING PHN: (407) FAX: (407) trivenbark@matern.net KEVIN KING MATERN ENGINEERING PHN: (407) FAX: (407) kking@matern.net COMMENTS: cc: OWNER : CALVIN WOOLFOLK 6501 MAGIC WAY, BLDG. 200 ORLANDO, FL, (407) FAX:(407) R+B FILE: : X6 RHODES + BRITO ARCHITECTS INC. : 605 E. ROBINSON STREET, SUITE 750 : ORLANDO, FL. : : : FAX PAGE 1 OF 1

2 OCPS CLAY SPRINGS ES SUBMITTAL DETAILS: SUBJECT: PLUMBING FIXTURES AND TRIM DATE RFI RECIEVED: Oct 21, 2014 DISCIPLINE: Plumbing PRIORITY STATUS: 2-STANDARD SPECIFICATION REF: REVIEWER DUE DATE: 10/31/2014 DWG REF. NONE DWG TITLE: SUBMITTAL CONTENTS: NO OF ITEMS: ITEM DESCRIPTION 1 PRODUCT LITERATURE(S) REVIEWERS: PRIMARY: SECONDARY: SUBMITTAL ASSIGNMENT MEMO TAD RIVENBARK SUBMITTAL NUMBER: MATERN ENGINEERING PHN: (407) FAX: (407) trivenbark@matern.net KEVIN KING MATERN ENGINEERING PHN: (407) FAX: (407) kking@matern.net REVIEW STATUS: REVIEWED FURNISHED AS MARKED REVISE AND RESUBMIT RE-SUBMIT WITH ITEMS NOT REVIEWED REJECTED THIS SUBMITTAL IS ISSUED TO YOU FOR YOUR REVIEW. PLEASE RESPOND AND RETURN...WITH THIS COMPLETED SAM TRANSMITTAL...TO MICHELE BUDAY-URDANETA NO LATER THAN: 10/31/2014. PLEASE COMPLETE REVIEW STATUS AT RIGHT COMMENTS: THIS SUBMITTAL WAS REVIEWED BY : (please print) cc: OWNER : CALVIN WOOLFOLK 6501 MAGIC WAY, BLDG. 200 ORLANDO, FL, CONTR/CM: : WILLIAMS COMPANY : BRAD KUBIN 2301 SILVER STAR RD. R+B FILE: : X6

3 Submittal Approval Form PROJECT: CLAY SPRINGS ELEMENTARY SCHOOL October 20, 2014 DATE: SUBCONTRACTOR NAME: Heichel Plumbing, Inc. 647 Business Park Blvd Winter Garden, Fl SUBCONTRATOR ADDRESS: NUMBER AND TITLE OF SPECIFICATION SECTION: Plumbing Fixtures and Trim Contractor s Submittal Stamp Architect/ Engineer s Submittal Stamp 10/20/14

4 SUBMITTAL DATA REVIEW COMMENTS Date: October 22, 2014 MPE Project No: Project: By: Submittal: OCPS-Clay Springs ES J. Walden for Kevin King Plumbing Fixtures & Trim Data No.: Submittal No.: 001 Contractor s I.D.: Heichel Class: Basis of Design (1) Equal (2) Substitution (3) X A No exceptions taken. B Make corrections noted. C Revise and Resubmit. D Submit Specified Item. E Rejected. N Review not required. ACTION CODE THE FOLLOWING COMMENTS SHALL BE CONSIDERED AN INTEGRAL PART OF THE SUBMITTAL DATA REVIEW. REVIEW OF THIS DATA IS ONLY FOR CONFORMANCE WITH THE DESIGN CONCEPT AS GIVEN IN THE CONTRACT DOCUMENTS. THE CONTRACTOR IS RESPONSIBLE FOR: QUANTITIES, FUNCTIONS, DIMENSIONS AND COORDINATION OF THE WORK WITH OTHER TRADES. END OF SUBMITTAL DATA REVIEW COMMENTS Corporate Office: 130 Candace Drive, Maitland, Florida Phone: Orlando Fort Myers Jacksonville Tampa Registered: FLORIDA * GEORGIA* LOUISIANA * NORTH CAROLINA * SOUTH CAROLINA * TEXAS * TENNESSEE * VIRGINIA

5 -- WC-1 -- Spec Seq#: 1

6 Spec Seq#: 2 Z5654-BWL HET Elongated Floor Mounted EcoVantage Flush Valve Toilet System TAG Z5654 HET Series Zurn HET Toilet System designed for optimal performance between Zurn fixture and Zurn flush valve at 1.28 gpf (4.8 Lpf), 1.6 gpf (6.0 Lpf) or Dual Flush volumes to save water gpf (4.8 lpf) or 1.6 gpf (6.0 lpf) or Dual Flush 1.28 gpf offers 20% water savings over 1.6 gpf system Vitreous china Elongated front rim 2-1/8" fully glazed trapway 14" rim height High efficiency siphon jet flush action Shipping Weight: 55 lbs. Z5654 Series Elongated Recommended Trim: Z5955SS-EL Elongated, standard white, open front toilet seat less cover with stainless steel check hinge. Engineering Specification Z5654-BWL EcoVantage High Efficiency Toilet System - Vitreous China, 1.28 gpf [4.8 lpf] or greater high efficiency, 14 height, floor mounted, bottom outlet toilet with siphon jet flushing action and elongated front rim with 1-1/2 top spud. This bowl is designed to perform to industry standards with as little as 1.28 gallons per flush, engineered to provide optimal performance and 20% water savings over conventional 1.6 gpf toilets. *Replaces Zurn Z5650 Z5972-COMB Closet bolt/wax ring kit Note: To ensure system performance: Minimum Running Water Pressure = 25 psi. These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. This space is for Architectural/Engineering Approval EcoVantage is a registered trademark of Zurn Industries See Zurn One Systems for suggested packages. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: EcoVantage and AV are trademarks of Zurn Industries, LLC. REV. DATE: 10/25/10 DWG. NO PRODUCT NO. Z5654-BWL

7 Z5654-BWL HET Elongated Floor Mounted EcoVantage Flush Valve Toilet System TAG Rough-in Spec Seq#: 2 Rough-in dimensions for Z5654 Series Z5654 with top spud, shown with Z6000AV-HET manual valve 1 [25] I.P.S. SUPPLY FINISHED WALL ±1 2 [121±13] FINISHED FLOOR These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. EcoVantage is a registered trademark of Zurn Industries ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: EcoVantage and AV are trademarks of Zurn Industries, LLC.. REV. DATE: 10/25/10 DWG. NO PRODUCT NO. Z5654-BWL

8 AquaVantage AV TAG Exposed Z6000AV-HET Model For Water Closets Model Suffix Options (Check/Specify Appropriate Options) -BG BioCare Handle -H Handle on Front of Flush Valve -L 1" [25] Metal Push Button -L3 3" [76] Metal Push Button -YJ Split Ring Pipe Support -YK Solid Ring Pipe Support -YO Bumper on Angle Stop Other This space is for Architectural/engineering Approval ENGINEERING SPECIFICATION: ZURN Z6000AV-HET AquaVantage AV Exposed Closet Flush Valve - Exposed, quiet diaphragm-type, chrome plated flushometer valve with a polished exterior. Complete with Zurn's 1.28 gpf AquaVantage TPE, chloramine resistant, dual seal diaphragm with a clog resistant, filtered by-pass. The valve is ADA compliant with a non-hold open and no leak handle feature, high back pressure vacuum breaker, one piece hex coupling nut, adjustable tailpiece, spud coupling and flange for top spud connection. Control stop has internal siphon-guard protection, vandal resistant stop cap, sweat solder kit, and a cast wall flange with set screw. Internal seals are made of chloramine resistant materials. The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: AquaVantage is a registered trademark of Zurn Industries, LLC. Rev. A Date: 7/2/09 Dwg. No Product No. Z6000AV-HET

9 Z5950 Commercial Heavy Duty Toilet Seat TAG Spec Seq#: 4 Select your seat and check all options that apply Engineering Specification: Z5955SS-EL Elongated, standard white, open front toilet seat, less cover, with stainless steel check hinge. -AM Anti-microbial protection -AMFR Anti-microbial/Fire Retardant -BK Black -STS Self-sustaining stainless steel check hinge Z5950 Series Z5950 Series Injection molded for rugged, heavy duty use. Highly resistant to cleansers and strong chemicals Stainless steel check hinge Integrally molded bumpers for lasting durability Architectural/Engineering Approval Z5956SS-EL Elongated, extra heavy duty, premium white, open front toilet seat, less cover, with stainless steel check hinge. -ADA 2 Lift -AM Anti-microbial protection -BK Black -STS Self-sustaining stainless steel check hinge Z5957SS White, open front toilet seat, with cover and stainless steel check hinge. -AM Anti-microbial protection -AMFR Anti-microbial/Fire Retardant -BK Black -EL Elongated -RD Round -STS Self-sustaining stainless steel check hinge Z5958SS White, closed front toilet seat, with cover and stainless steel check hinge. -AMFR Anti-microbial/Fire Retardant -EL Elongated -RD Round -STS Self-sustaining stainless steel check hinge Z5959SS-JUV White, open front child s toilet seat, less cover, with stainless steel check hinge. These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. See Zurn One Systems for suggested packages. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: Rev. D Date: 1/28/13 Dwg. No Product No. Z5950

10 -- WC-2 -- Spec Seq#: 5

11 Spec Seq#: 6 Z5665-BWL HET Elongated Floor Mounted, ADA Height EcoVantage Flush Valve Toilet System TAG Z5665 HET Series Zurn HET Toilet System designed for optimal performance between Zurn fixture and Zurn flush valve at 1.28 gpf (4.8 Lpf), 1.6 gpf (6.0 Lpf) or Dual Flush volumes to save water gpf (4.8 lpf) or 1.6 gpf (6.0 lpf) or Dual Flush 1.28 gpf offers 20% water savings over 1.6 gpf system Vitreous china ADA height Elongated front rim 2 1/8" fully glazed trapway High efficiency siphon jet flush action Shipping Weight: 57 lbs. Z5665 Series Elongated Recommended Trim: Z5955SS-EL Elongated, standard white, open front toilet seat less cover with stainless steel check hinge. Z5972-COMB Closet bolt/wax ring kit Note: To ensure system performance: Minimum Running Water Pressure = 25 psi. These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. Engineering Specification Z5665-BWL EcoVantage High Efficiency Toilet System - Vitreous China, 1.28 gpf [4.8 lpf] or greater high efficiency, ADA, floor mounted bottom outlet toilet with siphon jet flushing action and elongated front rim with 1-1/2 top spud. This bowl is designed to perform to industry standards with as little as 1.28 gallons per flush, engineered to provide optimal performance and 20% water savings over conventional 1.6 gpf toilets. *Replaces Zurn Z5660 Z5666-BWL EcoVantage High Efficiency Toilet System - Vitreous China, 1.28 gpf [4.8 lpf] or greater high efficiency, ADA, floor mounted bottom outlet toilet with siphon jet flushing action and elongated front rim with integral bedpan lugs, and 1-1/2 top spud. This bowl is designed to perform to industry standards with as little as 1.28 gallons per flush, engineered to provide optimal performance and 20% water savings over conventional 1.6 gpf toilets. *Replaces Zurn Z5661 This space is for Architectural/Engineering Approval Meets the American Disabilities Guidelines and ANSI A117.1 requirements when installed according to these requirements. EcoVantage is a registered trademark of Zurn Industries See Zurn One Systems for suggested packages. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: EcoVantage and AV are trademarks of Zurn Industries, LLC. REV. A DATE: 4/22/10 DWG. NO PRODUCT NO. Z5665-BWL

12 Z5665-BWL HET Elongated Floor Mounted, ADA Height EcoVantage Flush Valve Toilet System Rough-in Rough-in dimensions for Z5665 Series Z5665 with top spud, shown with Z6000AV-HET valve TAG Spec Seq#: 6 1 [25] I.P.S. SUPPLY FINISHED WALL ±1 2 [121±13] FINISHED FLOOR These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. Meets the American Disabilities Guidelines and ANSI A117.1 requirements when installed according to these requirements. EcoVantage is a registered trademark of Zurn Industries ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: EcoVantage and AV are trademarks of Zurn Industries, LLC.. REV. A DATE: 4/22/10 DWG. NO PRODUCT NO. Z5665-BWL

13 AquaVantage AV TAG Exposed Z6000AV-HET Model For Water Closets Model Suffix Options (Check/Specify Appropriate Options) -BG BioCare Handle -H Handle on Front of Flush Valve -L 1" [25] Metal Push Button -L3 3" [76] Metal Push Button -YJ Split Ring Pipe Support -YK Solid Ring Pipe Support -YO Bumper on Angle Stop Other This space is for Architectural/engineering Approval ENGINEERING SPECIFICATION: ZURN Z6000AV-HET AquaVantage AV Exposed Closet Flush Valve - Exposed, quiet diaphragm-type, chrome plated flushometer valve with a polished exterior. Complete with Zurn's 1.28 gpf AquaVantage TPE, chloramine resistant, dual seal diaphragm with a clog resistant, filtered by-pass. The valve is ADA compliant with a non-hold open and no leak handle feature, high back pressure vacuum breaker, one piece hex coupling nut, adjustable tailpiece, spud coupling and flange for top spud connection. Control stop has internal siphon-guard protection, vandal resistant stop cap, sweat solder kit, and a cast wall flange with set screw. Internal seals are made of chloramine resistant materials. The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: AquaVantage is a registered trademark of Zurn Industries, LLC. Rev. A Date: 7/2/09 Dwg. No Product No. Z6000AV-HET

14 Z5950 Commercial Heavy Duty Toilet Seat TAG Spec Seq#: 8 Select your seat and check all options that apply Engineering Specification: Z5955SS-EL Elongated, standard white, open front toilet seat, less cover, with stainless steel check hinge. -AM Anti-microbial protection -AMFR Anti-microbial/Fire Retardant -BK Black -STS Self-sustaining stainless steel check hinge Z5950 Series Z5950 Series Injection molded for rugged, heavy duty use. Highly resistant to cleansers and strong chemicals Stainless steel check hinge Integrally molded bumpers for lasting durability Architectural/Engineering Approval Z5956SS-EL Elongated, extra heavy duty, premium white, open front toilet seat, less cover, with stainless steel check hinge. -ADA 2 Lift -AM Anti-microbial protection -BK Black -STS Self-sustaining stainless steel check hinge Z5957SS White, open front toilet seat, with cover and stainless steel check hinge. -AM Anti-microbial protection -AMFR Anti-microbial/Fire Retardant -BK Black -EL Elongated -RD Round -STS Self-sustaining stainless steel check hinge Z5958SS White, closed front toilet seat, with cover and stainless steel check hinge. -AMFR Anti-microbial/Fire Retardant -EL Elongated -RD Round -STS Self-sustaining stainless steel check hinge Z5959SS-JUV White, open front child s toilet seat, less cover, with stainless steel check hinge. These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. See Zurn One Systems for suggested packages. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: Rev. D Date: 1/28/13 Dwg. No Product No. Z5950

15 -- WC-3 -- Spec Seq#: 9

16 Spec Seq#: 10 Z5675-BWL HET Children s Floor Mounted EcoVantage Flush Valve Toilet TAG Z5675 HET Series Zurn High Efficiency Toilets and paired performance flush valve systems are designed to exceed industry standards, while using as little as 1.1 gallons of water per flush. Universal high efficiency toilet can be specified with 1.28 gpf [4.8 lpf], 1.6 gpf [6.0 lpf] or dual flush valves. Vitreous china Elongated front rim 2" fully glazed trapway High efficiency siphon jet flush action Zurn product system component compatibility and quality assurance Shipping Weight: 42 lbs Z5675 Series Recommended Trim: Z5959SS-JUV White, open front juvenile toilet seat less cover with stainless steel check hinge. Z5972-COMB Closet bolt/wax ring kit Engineering Specification: Recommended Trim: Z5675-BWL Vitreous china, 1.1 gpf [4.16 lpf] or greater high efficiency, floor mounted, children s toilet with siphon jet flushing action, 10 high elongated front rim, with 1-1/2 top spud. This bowl is designed to perform to industry standards with as little as 1.1 gallons per flush, engineered to provide optimal performance. Note: To ensure system performance: Minimum Running Water Pressure = 25 psi. These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/ CSA B45 requirements. Architectural/Engineering Approval ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: EcoVantage is a registered trademark of Zurn Industries, LLC. See Zurn One Systems for suggested packages. The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information. Rev. A Date: 5/31/12 Dwg. No Product No. Z5675-BWL

17 Spec Seq#: 10 Z5675-BWL HET Children s Floor Mounted EcoVantage Flush Valve Toilet TAG Rough-in dimensions for Z5675 Series [64] [394] [140] [343] 25 [635] 1 [25] I.P.S. SUPPLY FINISHED WALL [121] [87] 5 [127] [292] 10 [254] 7 [181] 10 [254] C/L OUTLET FINISHED FLOOR These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/ CSA B45 requirements. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: EcoVantage is a registered trademark of Zurn Industries, LLC.

18 AquaVantage AV TAG Exposed Z6000AV-HET Model For Water Closets Model Suffix Options (Check/Specify Appropriate Options) -BG BioCare Handle -H Handle on Front of Flush Valve -L 1" [25] Metal Push Button -L3 3" [76] Metal Push Button -YJ Split Ring Pipe Support -YK Solid Ring Pipe Support -YO Bumper on Angle Stop Other This space is for Architectural/engineering Approval ENGINEERING SPECIFICATION: ZURN Z6000AV-HET AquaVantage AV Exposed Closet Flush Valve - Exposed, quiet diaphragm-type, chrome plated flushometer valve with a polished exterior. Complete with Zurn's 1.28 gpf AquaVantage TPE, chloramine resistant, dual seal diaphragm with a clog resistant, filtered by-pass. The valve is ADA compliant with a non-hold open and no leak handle feature, high back pressure vacuum breaker, one piece hex coupling nut, adjustable tailpiece, spud coupling and flange for top spud connection. Control stop has internal siphon-guard protection, vandal resistant stop cap, sweat solder kit, and a cast wall flange with set screw. Internal seals are made of chloramine resistant materials. The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: AquaVantage is a registered trademark of Zurn Industries, LLC. Rev. A Date: 7/2/09 Dwg. No Product No. Z6000AV-HET

19 Spec Seq#: 12 Z5950 Commercial Heavy Duty Toilet Seat TAG Engineering Specification: Z5955SS-EL Elongated, standard white, open front toilet seat, less cover, with stainless steel check hinge. Z5955SS-AM Elongated, standard white, open front toilet seat, less cover, with stainless steel check hinge and antimicrobial protection. Z5956SS-EL Elongated, premium white, open front toilet seat, less cover, with stainless steel check hinge. Z5950 Series Z5950 Series Injection molded for rugged, heavy duty use. Highly resistant to cleansers and strong chemicals Stainless steel check hinge Integrally molded bumpers for lasting durability Options: -BK Black toilet seat -STS Self-sustaining stainless steel check hinge This space is for Architectural/engineering Approval These dimensions and specifications are subject to change without notice. Z5956SS-AM Elongated, premium white, open front toilet seat, less cover, with stainless steel check hinge and antimicrobial protection. Z5957SS-EL Elongated, white, open front toilet seat, with cover and stainless steel check hinge. Z5957SS-RD Round, white, open front toilet seat, with cover and stainless steel check hinge. Z5958SS-EL Elongated, white, closed front toilet seat, with cover and stainless steel check hinge. Z5958SS-RD Round, white, closed front toilet seat, with cover and stainless steel check hinge. Z5959SS-JUV White, open front child s toilet seat, less cover, with stainless steel check hinge. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. See Zurn One Systems for suggested packages. Zurn Plumbing Products Group Commercial Brass and Fixtures Operation 2640 South Work Street Falconer, NY Phone: Fax: REV. A DWG. NO DATE: 8/11/06 C.N. NO PRODUCT NO. Z5950

20 -- UR-1 -- Spec Seq#: 13

21 PO Box 1376 Easton, PA Phone: Fax: Landlord and Tenant Conservation Products Z5798 The Pint gpf Top Spud Ultra Low Consumption Urinal System Z5798 Series The Pint Zurn One ultra low consumption urinal system designed for optimal performance between Zurn fixture and Zurn flush valve to save water while exceeding industry performance standards. 1/8 gpf [0.5 Lpf] Over 85% water savings over standard 1.0 gpf [4.0 Lpf] system Pressure compensating internal flow regulator Oversized footprint to make retrofit easy Vitreous china High efficiency washout flushing action 3/4" top spud 2" I.P.S. outlet flange and rubber gasket with integral trap 14" extended rim height for handicap compliance when installed at proper height Shipping Weight: 72 lbs. Engineering Specification Z EcoVantage High Efficiency Battery-Powered Sensor Urinal System System comes complete with sensor-operated, battery-powered exposed ZEG6003EV high efficiency flushometer valve, control stop assembly, and vitreous china urinal. The system is designed to perform to industry standards with as little as 1/8 gallon per flush. Valve is operated by an infrared convergence-type proximity sensor with smart technology, powered by 4 AA batteries. Valve features an internal flow regulator to maintain constant flow rates independent of line pressures. Vitreous china urinal is supplied with 3/4" top spud, 2" outlet connection, and strainer assembly. Z EcoVantage High Efficiency Hardwired Sensor Urinal System System comes complete with sensor-operated, hardwired exposed ZEG6003EV-HW high efficiency flushometervalve, control stop assembly, and vitreous china urinal. The system is designed to perform to industry standards with as little as 1/8gallon per flush. Valve is operatedby an infrared convergence-type proximity sensor with Z5798 Series 1/8 gpf The Pint EcoVantage flush valve urinal system. smart technology, powered by 6 VDC plug-in or hardwired power converter. Valve features an internal flow regulator to maintain constant flow rates independent of line pressures. Vitreous china urinal is supplied with 3/4" top spud, 2" outlet connection, and strainer assembly. Suffix Options UB Universal retrofit mounting bracket. Time saving urinal mounting bracket allows the urinal to be mounted to existing carrier studs and outlet piping without the need to make any adjustments behind the wall in most applications. See Zurn One Systems for suggested packages. This Space is for Architectural/Engineering Approval USA Landlord Conservation Products PO Box 1376 Easton, PA Phone: Fax:

22 PO Box 1376 Easton, PA Phone: Fax: Landlord and Tenant Conservation Products Rough-in dimensions for Z5798 Series *Z5798 with top spud [64] ±1/2 [130±13] [292] [64] 14 [356] [470] [361] [470] [114] [651] C.L. OUTLET [495] ( [317.5] ADA) FINISHED WALL 24 [610] (17 [432] ADA) 38 [965] (31 [787] ADA) [140] FINISHED FLOOR These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. Meets the American Disabilities Guidelines and ANSI A117.1 requirements when urinal is installed 17" [432 mm] from finished floor. USA Landlord Conservation Products PO Box 1376 Easton, PA Phone: Fax:

23 AquaVantage AV Model TAG Z6003AV-ULF GPF High Efficiency Valve for use with GPF Ultra Low Flow 3/4" Urinals Spec Seq#: 15 Suffix Options (Check/Specify Appropriate Options) -BG BioCare Handle -H Handle on Front of Flush Valve -L 1" [25] Metal Push Button -L3 3" [76] Metal Push Button -YJ Split Ring Pipe Support -YK Solid Ring Pipe Support Other This space is for Architectural/Engineering Approval ENGINEERING SPECIFICATION: ZURN Z6003AV-ULF AquaVantage AV Exposed Urinal Flush Valve- Exposed, quiet diaphragm-type, chrome plated.125 GPF flushometer valve with a polished exterior. Complete with Zurn's AquaVantage TPE, chloramine resistant, dual seal diaphragm with a clog resistant, filtered by-pass. The valve is ADA compliant with a non-hold open and no leak handle feature, high back pressure vacuum breaker, one piece hex coupling nut, adjustable tailpiece, spud coupling and flange for top spud connection. Control stop has internal siphon-guard protection, vandal resistant stop cap, sweat solder kit, and a cast wall flange with set screw. Internal seals are made of chloramine resistant materials. The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: AquaVantage is a registered trademark of Zurn Industries, LLC. Rev. A Date: 2/2/10 Dwg. No Product No. Z6003AV-ULF

24 -- L-1 -- Spec Seq#: 16

25 Spec Seq#: 17 Z x 18 Wall Hung Lavatory TAG Z5340 Series Suffix Options: -PED Vitreous china half pedestal (for use with Z5341 & Z5344 Only) -LS Left Side Soap Hole. -RS Right Side Soap Hole. Recommended Trim: Z8743-PC Grid Strainer. Z8700 Series P-Trap. Z8800 Series Stop with Flexible Supplies. Z NT ADA Trap, Stop, and Supply Protectors. Optional Trim: Z8746-PC ADA Grid Strainer. Z NT ADA Trap, Stop, and Supply Protectors for Offset Grid Strainers. Z5340 Series 20" [508 mm] x 18" [457 mm] Vitreous china Faucet holes for single, 4", or 8" centers Available with right or left side soap hole punching (Single or 4 centers only) Wall hung lavatory provided with wall hanger or for use with concealed arm carrier systems Front overflow Waste: 1-1/4" O.D. Depth: 6-3/8" Shipping Weight: 42 lbs. Engineering Specification: Z x 18 vitreous china wall hung lavatory with single faucet hole. Provided with hanger plate and holes for concealed arm carrier systems. Z x 18 vitreous china wall hung lavatory with 4 center faucet hole. Provided with hanger plate and holes for concealed arm carrier systems. Z x 18 vitreous china wall hung lavatory with 8 center faucet hole. Provided with hanger plate and holes for concealed arm carrier systems. (Not available with the -LS or -RS) These dimensions and specifications are subject to change without notice. Architectural/Engineering Approval Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34 [864mm] from finished floor. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information. See Zurn One Systems for suggested packages. Rev. G Date: 8/20/12 Dwg. No Product No. Z5340

26 Spec Seq#: 17 Z x 18 Wall Hung Lavatory TAG Rough-in dimensions for Z5340 Series Z5341 Lavatory with single faucet hole Z5344 Lavatory with 4" center faucet holes Z5348 Lavatory with 8" center faucet holes AVAT O R I E S 2X SCALE 4 [102] [546] 8 [203] [197] 4 [102] [190] 8 [79] [83] [133] 1 8 [3] [29] [464] [260] [133] Z1 BRACKET (AVAILABLE IN CAST DUCTILE) [418] 20 [508] [464] 17 [432] [37] 2 1 [65] [324] 8 [203] MIN. 6 [152] MAX [190] 27 [686] MIN. 34 [864] (ADA) 31 [787] [848] [827] 8 [203] 10 [254] [368] (Pop-Up Drain) ADA 9 [229] MIN. CLEARANCE FINISHED FLOOR Note: Rough-in for concealed arm carrier, see Zurn Z-1231 Rough-in sheet. These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34 [864mm ] from finished floor. Rev. G Date: 8/20/12 Dwg. No Product No. Z5340

27 CENTERSET METERING Z86300-XL-CP4 TAG Engineering Specifications: Zurn AquaSpec Z86300-XL-CP4 Polished chrome-plated single lavatory, slow-closing metering faucet with an integral shank and a 4-1/8" [105mm] long integral cast spout. Easy adjustable cycle time, preset to 10 seconds at 80 PSI. Unit is furnished with a water-conserving aerator which reduces flow to.25 GPC [1.0 GPM] (complying with ANSI A Standard for flow), 4" [102mm] centers, cast metal chrome plated cover plate, anti-rotation pins, integral shank filter, mounting hardware, and a 1/2 NPSM coupling nut for a standard lavatory riser. Requires less than 5 pounds force to activate per ANSI A Zurn Lead Compliant* XL products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn XL products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code ; Vermont 9 VCA 2470h. Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -CS Check Stops -G 1-1/4" [32mm] Grid Strainer Drain -GH 1-1/4 [32mm] Offset Handicap Grid Drain -IN Institutional Handle - Tamper-Proof and Vandal-Resistant -MY Mixing Yoke -MYCS Mixing Yoke with Check Stops -PT 1-1/4" [32mm] Cast Brass P-Trap with a 7-1/2" [191mm] Long 17-Gauge Wall Bend -3M 0.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Male Spray Outlet -16M 1.0 GPM [3.8 L] Vandal-Resistant Pressure Compensating Male Spray Outlet -21M 1.0 GPM [3.8L] Male Laminar Flow Outlet -22M 1.0 GPM [3.8L] Vandal-Resistant Male Laminar Flow Outlet -24M 0.35 GPM [1.3 L] Pressure Compensating Male Spray Outlet -25M 0.35 GPM [1.3 L] Vandal-Resistant Pressure Compensating Male Spray Outlet ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2011 Zurn Industries, LLC Rev. A Date: 4/28/11 C.N. No Dwg. No Product No. Z86300-XL-CP4

28 Spec Seq#: 19 ML760 GRID DRAIN SPECIFICATIONS 19-HOLE COMMERCIAL GRID DRAIN 1-1/4 Forged Brass Construction 6 17 GA Tailpiece Chrome Plated ML760 Cross Reference D PC FY A Z8743-PC CERTIFICATIONS cupc No. Part Name Material 1 Grid Body Brass 2 Washer Brass 3 Friction Washer Paper 4 Locknut Zinc 5 Tailpiece Brass

29 BRASS TRAP PRODUCT SPECIFICATIONS Spec Seq#: 20 Job Name: Job Location: For Commercial & Residential Applications Contractor: Approval: Tube S-Trap Tube P-Trap with clean out Tube P-Trap less clean out Sink P-Trap Semi-Cast P-Trap with clean out ML10372 ML10362 ML10356,ML10355,ML10357, ML10358, ML10359,ML10360, ML10361,ML10366, ML10367, ML10368, ML10369, ML10370, ML10371 ML10373, ML10374, ML10375 ML10364, ML10365 To Dimensions (inches) Submit Part No. Description A B C D E F ML /2" 20GA Tube P-TrapCP ML /2" 22GA Tube P-Trap CP ML /2" 20GA Tube P-Trap w/deep Flange CP ML /2" 17GA Tube P-Trap CP ML /2" 17GA Tube P-Trap w/deep Flange CP ML /2" 17GA G/J Tube P-Trap BR/Nut CP ML /2" 17GA G/J Tube P-Trap BR/Nut RB ML /2" 17GA Tube P-Trap w/cleanout CP ML /2" 17GA Semi Cast P-Trap BR/Nut w/cleanout CP ML /4" 17GA Semi Cast P-Trap w/cleanout CP ML /4" 22GA Tube P-Trap CP ML /4" 22GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube P-Trap CP ML /4" 20GA Tube P-Trap w/deep Flange CP ML /4" 17GA Tube P-Trap CP ML /4" 17GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube S-Trap w/deep Flange CP ML /2" 22GA Sink P-Trap CP ML /2" 17GA G/J Sink P-Trap BR/Nut CP ML /2" 17GA G/J Sink P-Trap BR/Nut RB Warranty See warranty information for more details MAINLINE reserves the right to make product and material changes at any time without notice. Mainline Brass Trap Spec rev

30 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 21 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

31 -- L-2 -- Spec Seq#: 22

32 Spec Seq#: 23 Z x 18 Wall Hung Lavatory TAG Z5340 Series Suffix Options: -PED Vitreous china half pedestal (for use with Z5341 & Z5344 Only) -LS Left Side Soap Hole. -RS Right Side Soap Hole. Recommended Trim: Z8743-PC Grid Strainer. Z8700 Series P-Trap. Z8800 Series Stop with Flexible Supplies. Z NT ADA Trap, Stop, and Supply Protectors. Optional Trim: Z8746-PC ADA Grid Strainer. Z NT ADA Trap, Stop, and Supply Protectors for Offset Grid Strainers. Z5340 Series 20" [508 mm] x 18" [457 mm] Vitreous china Faucet holes for single, 4", or 8" centers Available with right or left side soap hole punching (Single or 4 centers only) Wall hung lavatory provided with wall hanger or for use with concealed arm carrier systems Front overflow Waste: 1-1/4" O.D. Depth: 6-3/8" Shipping Weight: 42 lbs. Engineering Specification: Z x 18 vitreous china wall hung lavatory with single faucet hole. Provided with hanger plate and holes for concealed arm carrier systems. Z x 18 vitreous china wall hung lavatory with 4 center faucet hole. Provided with hanger plate and holes for concealed arm carrier systems. Z x 18 vitreous china wall hung lavatory with 8 center faucet hole. Provided with hanger plate and holes for concealed arm carrier systems. (Not available with the -LS or -RS) These dimensions and specifications are subject to change without notice. Architectural/Engineering Approval Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34 [864mm] from finished floor. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information. See Zurn One Systems for suggested packages. Rev. G Date: 8/20/12 Dwg. No Product No. Z5340

33 Spec Seq#: 23 Z x 18 Wall Hung Lavatory TAG Rough-in dimensions for Z5340 Series Z5341 Lavatory with single faucet hole Z5344 Lavatory with 4" center faucet holes Z5348 Lavatory with 8" center faucet holes AVAT O R I E S 2X SCALE 4 [102] [546] 8 [203] [197] 4 [102] [190] 8 [79] [83] [133] 1 8 [3] [29] [464] [260] [133] Z1 BRACKET (AVAILABLE IN CAST DUCTILE) [418] 20 [508] [464] 17 [432] [37] 2 1 [65] [324] 8 [203] MIN. 6 [152] MAX [190] 27 [686] MIN. 34 [864] (ADA) 31 [787] [848] [827] 8 [203] 10 [254] [368] (Pop-Up Drain) ADA 9 [229] MIN. CLEARANCE FINISHED FLOOR Note: Rough-in for concealed arm carrier, see Zurn Z-1231 Rough-in sheet. These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34 [864mm ] from finished floor. Rev. G Date: 8/20/12 Dwg. No Product No. Z5340

34 CENTERSET METERING Z86300-XL-CP4 TAG Engineering Specifications: Zurn AquaSpec Z86300-XL-CP4 Polished chrome-plated single lavatory, slow-closing metering faucet with an integral shank and a 4-1/8" [105mm] long integral cast spout. Easy adjustable cycle time, preset to 10 seconds at 80 PSI. Unit is furnished with a water-conserving aerator which reduces flow to.25 GPC [1.0 GPM] (complying with ANSI A Standard for flow), 4" [102mm] centers, cast metal chrome plated cover plate, anti-rotation pins, integral shank filter, mounting hardware, and a 1/2 NPSM coupling nut for a standard lavatory riser. Requires less than 5 pounds force to activate per ANSI A Zurn Lead Compliant* XL products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn XL products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code ; Vermont 9 VCA 2470h. Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -CS Check Stops -G 1-1/4" [32mm] Grid Strainer Drain -GH 1-1/4 [32mm] Offset Handicap Grid Drain -IN Institutional Handle - Tamper-Proof and Vandal-Resistant -MY Mixing Yoke -MYCS Mixing Yoke with Check Stops -PT 1-1/4" [32mm] Cast Brass P-Trap with a 7-1/2" [191mm] Long 17-Gauge Wall Bend -3M 0.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Male Spray Outlet -16M 1.0 GPM [3.8 L] Vandal-Resistant Pressure Compensating Male Spray Outlet -21M 1.0 GPM [3.8L] Male Laminar Flow Outlet -22M 1.0 GPM [3.8L] Vandal-Resistant Male Laminar Flow Outlet -24M 0.35 GPM [1.3 L] Pressure Compensating Male Spray Outlet -25M 0.35 GPM [1.3 L] Vandal-Resistant Pressure Compensating Male Spray Outlet ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2011 Zurn Industries, LLC Rev. A Date: 4/28/11 C.N. No Dwg. No Product No. Z86300-XL-CP4

35 Spec Seq#: 25 ML760 GRID DRAIN SPECIFICATIONS 19-HOLE COMMERCIAL GRID DRAIN 1-1/4 Forged Brass Construction 6 17 GA Tailpiece Chrome Plated ML760 Cross Reference D PC FY A Z8743-PC CERTIFICATIONS cupc No. Part Name Material 1 Grid Body Brass 2 Washer Brass 3 Friction Washer Paper 4 Locknut Zinc 5 Tailpiece Brass

36 BRASS TRAP PRODUCT SPECIFICATIONS Spec Seq#: 26 Job Name: Job Location: For Commercial & Residential Applications Contractor: Approval: Tube S-Trap Tube P-Trap with clean out Tube P-Trap less clean out Sink P-Trap Semi-Cast P-Trap with clean out ML10372 ML10362 ML10356,ML10355,ML10357, ML10358, ML10359,ML10360, ML10361,ML10366, ML10367, ML10368, ML10369, ML10370, ML10371 ML10373, ML10374, ML10375 ML10364, ML10365 To Dimensions (inches) Submit Part No. Description A B C D E F ML /2" 20GA Tube P-TrapCP ML /2" 22GA Tube P-Trap CP ML /2" 20GA Tube P-Trap w/deep Flange CP ML /2" 17GA Tube P-Trap CP ML /2" 17GA Tube P-Trap w/deep Flange CP ML /2" 17GA G/J Tube P-Trap BR/Nut CP ML /2" 17GA G/J Tube P-Trap BR/Nut RB ML /2" 17GA Tube P-Trap w/cleanout CP ML /2" 17GA Semi Cast P-Trap BR/Nut w/cleanout CP ML /4" 17GA Semi Cast P-Trap w/cleanout CP ML /4" 22GA Tube P-Trap CP ML /4" 22GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube P-Trap CP ML /4" 20GA Tube P-Trap w/deep Flange CP ML /4" 17GA Tube P-Trap CP ML /4" 17GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube S-Trap w/deep Flange CP ML /2" 22GA Sink P-Trap CP ML /2" 17GA G/J Sink P-Trap BR/Nut CP ML /2" 17GA G/J Sink P-Trap BR/Nut RB Warranty See warranty information for more details MAINLINE reserves the right to make product and material changes at any time without notice. Mainline Brass Trap Spec rev

37 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 27 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

38 Spec Seq#: 28 Submittal Sheet ADA-compliant undersink protection General Description: MAINLINE EZ Series waste and supply piping covers satisfy ADA compliance requirements. Built-in EZ Grip internal fasteners and internal, EZ Tear-To-Fit trimming feature allow for fast installation without tools. MAINLINE cover kits are designed to fit on all tubular and cast brass P-trap assemblies. Valve cover completely encloses angle valve and supply tube for both handled and keyed type water stops. Material Molded vinyl Nominal Wall 1/8" constant Durometer Shore A UV Protection Will not fade or discolor Durability Virtually indestructible Trimming (EZ Series) Internal EZ Tear-To-Fit trim feature Fasteners (EZ Series) Internal EZ Grip fasteners (reusable) Color China white Paintability Apply Latex paint Burning Characteristics Self extinguished ASTM D sec (ATB) 0 mm (AEB) Bacteria/Fungus ASTM G21 and G22/ Resistance Result: 0 growth Maintenance Use common detergents Shown with Accessory ML105EZ (fits all standard 5" offset wheelchair strainers) NOTE: EZ Tear-To-Fit trim grooves Internal ribs add cushioning and thermal resistance Install over pipes. Press finger recesses to engage internal fasteners. To remove covers, firmly pull seam apart using a strong grip. Accessory ML105EZ is included in ML103EZ kits. Tear-to-fit on internal dimensioned tear lines. #100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies. Model ML101EZ One P-trap cover, one angle valve and supply covers Model ML103EZ One P-trap cover, two angle valve and supply covers, one 5" offset wheelchair strainer cover EZ Series Shown EZ Grip internal fasteners 9" supply tube cover with internal EZ Tear-To-Fit trim grooves Vent slots keep valve dry 10" tailpiece cover 10" waste arm cover with internal EZ Tear-To-Fit trim feature J-bend covers all tubular and cast brass configurations Vent hole keeps P-trap dry Model ML102EZ One P-trap cover, two angle valve and supply covers Model ML105EZ One 5" offset wheelchair strainer cover Manufactured under one or more of the following U.S. or Canadian patents. Other patents pending. 5,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,412 5,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,083 Job/Location Designer MAINLINE reserves the right to make product and material changes at any time without notice.

39 -- L-3 -- Spec Seq#: 29

40 Spec Seq#: 30 Z x 18 Wall Hung Lavatory TAG Z5340 Series Suffix Options: -PED Vitreous china half pedestal (for use with Z5341 & Z5344 Only) -LS Left Side Soap Hole. -RS Right Side Soap Hole. Recommended Trim: Z8743-PC Grid Strainer. Z8700 Series P-Trap. Z8800 Series Stop with Flexible Supplies. Z NT ADA Trap, Stop, and Supply Protectors. Optional Trim: Z8746-PC ADA Grid Strainer. Z NT ADA Trap, Stop, and Supply Protectors for Offset Grid Strainers. Z5340 Series 20" [508 mm] x 18" [457 mm] Vitreous china Faucet holes for single, 4", or 8" centers Available with right or left side soap hole punching (Single or 4 centers only) Wall hung lavatory provided with wall hanger or for use with concealed arm carrier systems Front overflow Waste: 1-1/4" O.D. Depth: 6-3/8" Shipping Weight: 42 lbs. Engineering Specification: Z x 18 vitreous china wall hung lavatory with single faucet hole. Provided with hanger plate and holes for concealed arm carrier systems. Z x 18 vitreous china wall hung lavatory with 4 center faucet hole. Provided with hanger plate and holes for concealed arm carrier systems. Z x 18 vitreous china wall hung lavatory with 8 center faucet hole. Provided with hanger plate and holes for concealed arm carrier systems. (Not available with the -LS or -RS) These dimensions and specifications are subject to change without notice. Architectural/Engineering Approval Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34 [864mm] from finished floor. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: The information contained in this document is subject to change without notice. Please contact Zurn for most up to date information. See Zurn One Systems for suggested packages. Rev. G Date: 8/20/12 Dwg. No Product No. Z5340

41 Spec Seq#: 30 Z x 18 Wall Hung Lavatory TAG Rough-in dimensions for Z5340 Series Z5341 Lavatory with single faucet hole Z5344 Lavatory with 4" center faucet holes Z5348 Lavatory with 8" center faucet holes AVAT O R I E S 2X SCALE 4 [102] [546] 8 [203] [197] 4 [102] [190] 8 [79] [83] [133] 1 8 [3] [29] [464] [260] [133] Z1 BRACKET (AVAILABLE IN CAST DUCTILE) [418] 20 [508] [464] 17 [432] [37] 2 1 [65] [324] 8 [203] MIN. 6 [152] MAX [190] 27 [686] MIN. 34 [864] (ADA) 31 [787] [848] [827] 8 [203] 10 [254] [368] (Pop-Up Drain) ADA 9 [229] MIN. CLEARANCE FINISHED FLOOR Note: Rough-in for concealed arm carrier, see Zurn Z-1231 Rough-in sheet. These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A and CAN/CSA B45 requirements. ZURN INDUSTRIES, LLC. COMMERCIAL BRASS OPERATION 5900 ELWIN BUCHANAN DRIVE SANFORD NC Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: Fax: Meets the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34 [864mm ] from finished floor. Rev. G Date: 8/20/12 Dwg. No Product No. Z5340

42 CENTERSET METERING Z86500-XL TAG Engineering Specifications: Zurn AquaSpec Z86500-XL Polished chrome-plated cast brass faucet body with integral shanks, slowclosing metering cartridges, a 4" [102mm] long integral cast spout, and vandal-resistant ADA compliant color-coded metal handles. Easy adjustable cycle time, preset to 10 seconds at 80 PSI. Unit is furnished with a waterconserving spray outlet which reduces flow to.25 GPC [1.0 GPM] (complying to ANSI A Standard for flow), integral shank filters, mounting hardware and 1/2" coupling nuts for standard lavatory risers. Zurn Lead Compliant* XL products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn XL products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code ; Vermont 9 VCA 2470h. Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix -G -GH -IN -PT -RKR -3M -16M -21M -22M -24M -25M Description 1-1/4" [32mm] Grid Strainer Drain 1-1/4" [32mm] Offset Handicap Drain Institutional Handle- Tamper-Proof and Vandal-Resistant 1-1/4" [32mm] Cast Brass P-Trap with a 7-1/2" [191mm] Long 17-Gauge Wall Bend ADA Compliant Rocker Handle.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Male Spray Outlet 1.0 GPM [3.8 L] Vandal Resistant Pressure Compensating Male Spray Outlet 1.0 GPM [3.8L] Pressure Compensating Male Laminar Flow Outlet 1.0 GPM [3.8L] Pressure Compensating Vandal-Resistant Male Laminar Flow Outlet 0.35 GPM [1.3 L] Pressure Compensating Male Spray Outlet 0.35 GPM [1.3 L] Vandal-Resistant Pressure Compensating Male Spray Outlet ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2011 Zurn Industries, LLC Rev. B Date: 4/28/11 C.N. No Dwg. No Product No. Z86500-XL

43 Spec Seq#: 32 ML760 GRID DRAIN SPECIFICATIONS 19-HOLE COMMERCIAL GRID DRAIN 1-1/4 Forged Brass Construction 6 17 GA Tailpiece Chrome Plated ML760 Cross Reference D PC FY A Z8743-PC CERTIFICATIONS cupc No. Part Name Material 1 Grid Body Brass 2 Washer Brass 3 Friction Washer Paper 4 Locknut Zinc 5 Tailpiece Brass

44 BRASS TRAP PRODUCT SPECIFICATIONS Spec Seq#: 33 Job Name: Job Location: For Commercial & Residential Applications Contractor: Approval: Tube S-Trap Tube P-Trap with clean out Tube P-Trap less clean out Sink P-Trap Semi-Cast P-Trap with clean out ML10372 ML10362 ML10356,ML10355,ML10357, ML10358, ML10359,ML10360, ML10361,ML10366, ML10367, ML10368, ML10369, ML10370, ML10371 ML10373, ML10374, ML10375 ML10364, ML10365 To Dimensions (inches) Submit Part No. Description A B C D E F ML /2" 20GA Tube P-TrapCP ML /2" 22GA Tube P-Trap CP ML /2" 20GA Tube P-Trap w/deep Flange CP ML /2" 17GA Tube P-Trap CP ML /2" 17GA Tube P-Trap w/deep Flange CP ML /2" 17GA G/J Tube P-Trap BR/Nut CP ML /2" 17GA G/J Tube P-Trap BR/Nut RB ML /2" 17GA Tube P-Trap w/cleanout CP ML /2" 17GA Semi Cast P-Trap BR/Nut w/cleanout CP ML /4" 17GA Semi Cast P-Trap w/cleanout CP ML /4" 22GA Tube P-Trap CP ML /4" 22GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube P-Trap CP ML /4" 20GA Tube P-Trap w/deep Flange CP ML /4" 17GA Tube P-Trap CP ML /4" 17GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube S-Trap w/deep Flange CP ML /2" 22GA Sink P-Trap CP ML /2" 17GA G/J Sink P-Trap BR/Nut CP ML /2" 17GA G/J Sink P-Trap BR/Nut RB Warranty See warranty information for more details MAINLINE reserves the right to make product and material changes at any time without notice. Mainline Brass Trap Spec rev

45 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 34 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

46 Spec Seq#: 35 Submittal Sheet ADA-compliant undersink protection General Description: MAINLINE EZ Series waste and supply piping covers satisfy ADA compliance requirements. Built-in EZ Grip internal fasteners and internal, EZ Tear-To-Fit trimming feature allow for fast installation without tools. MAINLINE cover kits are designed to fit on all tubular and cast brass P-trap assemblies. Valve cover completely encloses angle valve and supply tube for both handled and keyed type water stops. Material Molded vinyl Nominal Wall 1/8" constant Durometer Shore A UV Protection Will not fade or discolor Durability Virtually indestructible Trimming (EZ Series) Internal EZ Tear-To-Fit trim feature Fasteners (EZ Series) Internal EZ Grip fasteners (reusable) Color China white Paintability Apply Latex paint Burning Characteristics Self extinguished ASTM D sec (ATB) 0 mm (AEB) Bacteria/Fungus ASTM G21 and G22/ Resistance Result: 0 growth Maintenance Use common detergents Shown with Accessory ML105EZ (fits all standard 5" offset wheelchair strainers) NOTE: EZ Tear-To-Fit trim grooves Internal ribs add cushioning and thermal resistance Install over pipes. Press finger recesses to engage internal fasteners. To remove covers, firmly pull seam apart using a strong grip. Accessory ML105EZ is included in ML103EZ kits. Tear-to-fit on internal dimensioned tear lines. #100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies. Model ML101EZ One P-trap cover, one angle valve and supply covers Model ML103EZ One P-trap cover, two angle valve and supply covers, one 5" offset wheelchair strainer cover EZ Series Shown EZ Grip internal fasteners 9" supply tube cover with internal EZ Tear-To-Fit trim grooves Vent slots keep valve dry 10" tailpiece cover 10" waste arm cover with internal EZ Tear-To-Fit trim feature J-bend covers all tubular and cast brass configurations Vent hole keeps P-trap dry Model ML102EZ One P-trap cover, two angle valve and supply covers Model ML105EZ One 5" offset wheelchair strainer cover Manufactured under one or more of the following U.S. or Canadian patents. Other patents pending. 5,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,412 5,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,083 Job/Location Designer MAINLINE reserves the right to make product and material changes at any time without notice.

47 -- S-1 -- Spec Seq#: 36

48 Spec Seq#: 37 Lustertone Single Bowl Classroom Sinks and Sink Packages Double Ledge Models DRKR and DRKRQ Series Models DRKAD and DRKADQ Series A.D.A. Compliant SPECIFICATIONS GENERAL Highest quality sink bowl seamlessly formed of #18 (1.2mm) gauge, type 304 (18-8) nickel bearing stainless steel. Top Mount. CLASSROOM/ INSTITUTIONAL SINK PACKAGES Models DRKR(Q)2220C, DRKR(Q)2517C, DRKR(Q)3119C, DRKAD(Q)2220C, DRKAD(Q)2517C, and DRKAD(Q)3119C feature a scratch and crack resistant stainless steel sink, Contemporary Hi-Arc faucet and No Lead Flexi-Guard Bubbler. Package includes: (1) LK2439 Two-handle Contemporary Hi-Arc concealed undermount faucet with 45 restricted swing spout and aerator. Outlet height: 10" (254mm); Reach: 6-1/2" (165mm). No spray. (1) LK1141A No Lead Flexi-Guard Bubbler. Pushbutton valve design bubbler meets ANSI and ADA requirements. Designed so that water never comes in contact with leadcontaining materials. Flexi-Guard safety bubbler flexes on impact to prevent accidental injury when getting a drink. Built-in adjustable water volume control. (1) LK35 Duo strainer. Model DRKR(Q)2517C OTHER DRKAD(Q)2517, DRKAD(Q)2220, DRKAD(Q)2522 and DRKAD(Q)3119 drain opening is 3-1/2" (89mm) and located centered left-to-right and off-center front-to-back as illustrated. All other drain opening sizes are 3-1/2" (89mm) and centered in bowl as illustrated. Slotted hole allows for vandal-resistant faucet and bubbler. NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown (see back page). Sink complies with ASME A / CSA B Both the faucet and the bubbler are classified by Underwriters Laboratories Inc. to NSF/ANSI61 for residential use. SEE NEXT PAGE FOR PRODUCT DIMENSIONS. SINKS ARE MADE IN THE USA THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS. THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISIFY A.D.A. STANDARDS MAY NOT BE DESIRABLE. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visti elkayusa.com for most current version of Elkay product specification sheets. Elkay elkayusa.com This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of others producers offerings, be certain these featrues are not overlooked Camden Court Oak Brook, IL Printed in U.S.A Elkay (Rev. 06/10) 1-21J

49 Spec Seq#: 37 Lustertone Single Bowl Classroom Sinks and Sink Packages Double Ledge Models DRKR and DRKRQ Series Models DRKAD and DRKADQ Series A.D.A. Compliant SPECIFICATIONS SINK DIMENSIONS* U-Channel Model Number Quick-Clip Model Number DRKR2220C DRKRQ2220C DRKR2220 DRKRQ2220 DRKR2517C DRKRQ2517C Cutout in Countertop [11/ 2" (38mm) Radius Corners] L W No. of Faucet Holes (see back page) 31/ 2" (59mm) Drain Opening (see above for details) / 2 131/ / 8 213/ 8 187/ 8 (559mm) (495mm) (343mm) (406mm) (194mm) (543mm) (479mm) 4 Centered 27 (686mm) / 2 131/ / 8 213/ 8 187/ 8 (559mm) (495mm) (343mm) (406mm) (194mm) (543mm) (479mm) 2, 2LM or 4 Centered 27 (686mm) / 2 7 5/ 8 243/ 8 163/ 8 (635mm) (432mm) (406mm) (343mm) (194mm) (619mm) (416mm) 4 Centered 30 (762mm) Overall L A W B L C Inside Bowl W D D E Minimum Cabinet Size DRKR2517 DRKRQ / 2 7 5/ 8 243/ 8 163/ 8 (635mm) (432mm) (406mm) (343mm) (194mm) (619mm) (416mm) 2, 2LM or 4 Centered 30 (762mm) DRKR2522 DRKRQ / 8 243/ 8 213/ 8 (635mm) (559mm) (406mm) (343mm) (194mm) (619mm) (416mm) 2, 2LM or 4 Centered 30 (762mm) / / 8 303/ 8 187/ 8 (787mm) (495mm) (559mm) (406mm) (194mm) (772mm) (479mm) 4 Centered 36 (914mm) / / 8 303/ 8 187/ 8 (787mm) (495mm) (559mm) (406mm) (194mm) (772mm) (479mm) 2, 2LM or 4 Centered 36 (914mm) DRKR3119C DRKRQ3119C DRKR3119 DRKRQ3119 DRKAD2220C DRKAD2220 DRKADQ2220C DRKADQ2220 DRKAD2517C DRKADQ2517C / 2 131/ 2 16 (559mm) (495mm) (343mm) (406mm) ** 213/ 8 187/ 8 (543mm) (479mm) 4 Off-Centered 27 (686mm) / 2 131/ 2 16 (559mm) (495mm) (343mm) (406mm) ** 213/ 8 187/ 8 (543mm) (479mm) 2, 2LM or 4 Off-Centered 27 (686mm) / 2 (635mm) (432mm) (406mm) (343mm) ** 243/ 8 163/ 8 (619mm) (416mm) 4 Off-Centered 30 (762mm) DRKAD2517 DRKADQ / 2 (635mm) (432mm) (406mm) (343mm) ** 243/ 8 163/ 8 (619mm) (416mm) 2, 2LM or 4 Off-Centered 30 (762mm) DRKAD2522 DRKADQ (635mm) (559mm) (406mm) (343mm) ** 243/ 8 213/ 8 (619mm) (416mm) 2, 2LM or 4 Off-Centered 30 (762mm) / (787mm) (495mm) (559mm) (406mm) ** 303/ 8 187/ 8 (772mm) (479mm) 4 Off-Centered 36 (914mm) / (787mm) (495mm) (559mm) (406mm) ** 303/ 8 187/ 8 (772mm) (479mm) 2, 2LM or 4 Off-Centered 36 (914mm) DRKAD3119C DRKAD3119 DRKADQ3119C DRKADQ3119 * Length is left to right. Width is front to back. Unless otherwise specified, all sinks which do not have suffix C are less fittings (no faucet, bubbler or drain), but are drilled for faucet, bubbler and drain as illustrated. ** Available in 4" (102mm), 4-1/2" (114mm), 5" (127mm), 5-1/2" (140mm), 6" (152mm) or 6-1/2" (165mm) depths. Please consult your sales representative for other depths or modifications. 5" D D B B 1-3/4" (44mm) R 1-3/4" (44mm) R C A 1-3/4" (44mm) R DRKAD(Q) Series Off-Centered Drain Elkay 1-21J (Rev. 06/10) C A E 1-3/4" (44mm) R E DRKR(Q) and DRKAD(Q) Series Centered Drain 2222 Camden Court Oak Brook, IL elkayusa.com Printed in U.S.A Elkay

50 Spec Seq#: 37 Lustertone Single Bowl Classroom Sinks and Sink Packages Double Ledge Models DRKR and DRKRQ Series Models DRKAD and DRKADQ Series A.D.A. Compliant SPECIFICATIONS HOLE DRILLING CONFIGURATIONS 3" MODELS DRKAD(Q)2517**2 (76mm) DRKAD(Q)2220**2 DRKAD(Q)2522**2 DRKAD(Q)3119**2 2 HOLE CONFIGURATION Off-Centered Drain Centered Drain * * 3" (76mm) MODELS DRKR(Q)22202 DRKR(Q)25172 DRKR(Q) " DRKR(Q)31192 (76mm) 3" (76mm) SLOTTED HOLE (2 PLACES) SLOTTED HOLE (2 PLACES) * * 2LM (LEFT MIDDLE) HOLE CONFIGURATION Off-Centered Drain Centered Drain * * MODELS DRKAD(Q)2517**2LM DRKAD(Q)2220**2LM DRKAD(Q)2522**2LM DRKAD(Q)3119**2LM 3" (76mm) Cent er 1-1/2" (38mm) SLOTTED DIA. HOLE HOLE (1 PLACE) (1 PLACE) MODELS DRKR(Q)22202LM DRKR(Q)25172LM DRKR(Q)25222LM DRKR(Q)31192LM 3" (76mm) Cent er 1-1/2" (38mm) SLOTTED DIA. HOLE HOLE (1 PLACE) (1 PLACE) * * 4 HOLE CONFIGURATION Off-Centered Drain Centered Drain * * MODELS DRKAD(Q)2517**4 DRKAD(Q)2220**4 DRKAD(Q)2522**4 DRKAD(Q)3119**4 4" (102mm) MODELS DRKR(Q)22204 DRKR(Q)25174 DRKR(Q) " DRKR(Q)31194 (76mm) 4" (102mm) 3" 1-1/2" (38mm) DIA. HOLE (3 PLACES) SLOTTED HOLE (1 PLACE) * 1-1/2" (38mm) SLOTTED DIA. HOLE HOLE (3 PLACES) (1 PLACE) * *2-1/2" (64mm) for DRKR(Q)2522 and DRKAD(Q)2522, 2-1/4" (57mm) for all others. **Bowl depths for ADA models: 40 = 4 (102mm), 45 = 4-1/2 (114mm), 50 = 5 (127mm), 55 = 5-1/2" (140mm), 60 = 6" (152mm), 65 = 6-1/2" (165mm). U-Channel Type Mounting System Slotted Hole Quick-Clip Mounting system 1-1/8" (29mm) DIA. Elkay elkayusa.com 2222 Camden Court Oak Brook, IL Printed in U.S.A Elkay (Rev. 06/10) 1-21J

51 Spec Seq#: 38 LABORATORY FAUCET - SINGLE Z825B4-XL TAG Engineering Specifications: Zurn AquaSpec Z825B4-XL Polished chrome-plated single laboratory faucet with integral shank, a quarter turn ceramic disc cartridge and a 5-3/8" [137mm] centerline rigid or swing gooseneck spout. Unit is furnished with a 2.2 GPM [8.3 L] pressure compensating aerator (complying with ANSI A Standard for flow), a 4 [102mm] vandal-resistant color-coded metal wrist blade handle, mounting hardware and a 1/2" NPSM coupling nut for standard lavatory riser. Zurn Lead Compliant* XL products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn XL products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code ; Vermont 9 VCA 2470h Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -AR Anti-Rotation Pins -FC 2.0 GPM [7.6 L] Laminar Flow Control in Base of Spout -G 1-1/4" [32mm] Grid Strainer Drain -HCT Hot/Cold Text Indexes -PT 1-1/4" [32mm] Cast Brass P-Trap with a 7-1/2" [191mm] Long 17-Gauge Wall Bend -140 Restricted 140 j Swing Spout -2F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Aerator -3F 0.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Female Spray Outlet -4F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Laminar Flow Outlet -7F 1.0 GPM [3.8 L] Pressure Compensating Female Spray Outlet -16F 1.0 GPM [3.8 L] Vandal Resistant Pressure Compensating Female Spray Outlet -17F 1.5 GPM [5.7 L] Vandal Resistant Pressure Compensating Female Aerator -18F 1.5 GPM [5.7 L] Vandal Resistant Pressure Compensating Female Laminar Flow -19F 1.5 GPM [5.7 L] Anti-Microbial Pressure Compensating Female Laminar Flow Outlet -21F 1.0 GPM [3.8L] Female Laminar Flow Outlet -22F 1.0 GPM [3.8L] Vandal-Resistant Female Laminar Flow Outlet -23F 1.5 GPM [5.7L] Pressure Compensating Female Aerator ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2009 Zurn Industries, LLC Rev. Date: 11/24/09 C.N. No Dwg. No Product No. Z825B4-XL

52 Spec Seq#: 39 BUBBLER Z83600-XL TAG Engineering Specification: Zurn AquaSpec Z83600-XL Polished chrome plated cast brass self-closing bubbler with an internal filter, an angled stream nozzle, a cast metal push handle, a flexible mouth guard with Biosafe antimicrobial technology, and a manual volume control. Zurn Lead Compliant* XL products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn XL products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code ; Vermont 9 VCA 2470h Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -AR Anti-Rotation Pins -CS Check Stop -PC Polished Chrome Plated Brass Mouth Guard -RKR ADA Compliant Rocker Handle ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2010 Zurn Industries, LLC Rev. B Date: 7/28/10 C.N. No Dwg. No Product No. Z83600-XL

53 Spec Seq#: 40 BASKET STRAINER Z8740-PC TO Z SS TAG Engineering Specification: Zurn Z8740-PC TO Z SS Heavy duty forged basket strainer with matching basket and 1 1/2[38] x 4[102] 20 gauge tailpiece with cast brass locknut and cast brass tailpiece nut. Note: All dimensions are for reference only. Do not use for pre-plumbing PRODUCT MATERIAL DIMENSIONS MASTER WEIGHT NUMBER C ØD CARTON CARTON Z8740-PC CHROME PLATED BRASS 2 1/8[54] 4 1/2[114] Z8741-SS STAINLESS STEEL (SS430) 2 3/4[70] 4 3/8[111] Z SS STAINLESS STEEL (SS430) W/ 17GA. TAILPIECE 2 3/4[70] 4 3/8[111] OPTIONAL ACCESSORIES Suffix Description -LTLBN Less Tailpiece, with zinc locknut and cast brass tailpiece nut ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2010 Zurn Industries, LLC Rev. D Date: 2/12/10 C.N. No Dwg. No Product No. Z8740-PC - Z SS

54 BRASS TRAP PRODUCT SPECIFICATIONS Spec Seq#: 41 Job Name: Job Location: For Commercial & Residential Applications Contractor: Approval: Tube S-Trap Tube P-Trap with clean out Tube P-Trap less clean out Sink P-Trap Semi-Cast P-Trap with clean out ML10372 ML10362 ML10356,ML10355,ML10357, ML10358, ML10359,ML10360, ML10361,ML10366, ML10367, ML10368, ML10369, ML10370, ML10371 ML10373, ML10374, ML10375 ML10364, ML10365 To Dimensions (inches) Submit Part No. Description A B C D E F ML /2" 20GA Tube P-TrapCP ML /2" 22GA Tube P-Trap CP ML /2" 20GA Tube P-Trap w/deep Flange CP ML /2" 17GA Tube P-Trap CP ML /2" 17GA Tube P-Trap w/deep Flange CP ML /2" 17GA G/J Tube P-Trap BR/Nut CP ML /2" 17GA G/J Tube P-Trap BR/Nut RB ML /2" 17GA Tube P-Trap w/cleanout CP ML /2" 17GA Semi Cast P-Trap BR/Nut w/cleanout CP ML /4" 17GA Semi Cast P-Trap w/cleanout CP ML /4" 22GA Tube P-Trap CP ML /4" 22GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube P-Trap CP ML /4" 20GA Tube P-Trap w/deep Flange CP ML /4" 17GA Tube P-Trap CP ML /4" 17GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube S-Trap w/deep Flange CP ML /2" 22GA Sink P-Trap CP ML /2" 17GA G/J Sink P-Trap BR/Nut CP ML /2" 17GA G/J Sink P-Trap BR/Nut RB Warranty See warranty information for more details MAINLINE reserves the right to make product and material changes at any time without notice. Mainline Brass Trap Spec rev

55 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 42 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

56 -- S-2 -- Spec Seq#: 43

57 Spec Seq#: 44 Lustertone Single Bowl Classroom Sinks and Sink Packages Double Ledge Models DRKR and DRKRQ Series Models DRKAD and DRKADQ Series A.D.A. Compliant SPECIFICATIONS GENERAL Highest quality sink bowl seamlessly formed of #18 (1.2mm) gauge, type 304 (18-8) nickel bearing stainless steel. Top Mount. CLASSROOM/ INSTITUTIONAL SINK PACKAGES Models DRKR(Q)2220C, DRKR(Q)2517C, DRKR(Q)3119C, DRKAD(Q)2220C, DRKAD(Q)2517C, and DRKAD(Q)3119C feature a scratch and crack resistant stainless steel sink, Contemporary Hi-Arc faucet and No Lead Flexi-Guard Bubbler. Package includes: (1) LK2439 Two-handle Contemporary Hi-Arc concealed undermount faucet with 45 restricted swing spout and aerator. Outlet height: 10" (254mm); Reach: 6-1/2" (165mm). No spray. (1) LK1141A No Lead Flexi-Guard Bubbler. Pushbutton valve design bubbler meets ANSI and ADA requirements. Designed so that water never comes in contact with leadcontaining materials. Flexi-Guard safety bubbler flexes on impact to prevent accidental injury when getting a drink. Built-in adjustable water volume control. (1) LK35 Duo strainer. Model DRKR(Q)2517C OTHER DRKAD(Q)2517, DRKAD(Q)2220, DRKAD(Q)2522 and DRKAD(Q)3119 drain opening is 3-1/2" (89mm) and located centered left-to-right and off-center front-to-back as illustrated. All other drain opening sizes are 3-1/2" (89mm) and centered in bowl as illustrated. Slotted hole allows for vandal-resistant faucet and bubbler. NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown (see back page). Sink complies with ASME A / CSA B Both the faucet and the bubbler are classified by Underwriters Laboratories Inc. to NSF/ANSI61 for residential use. SEE NEXT PAGE FOR PRODUCT DIMENSIONS. SINKS ARE MADE IN THE USA THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS. THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISIFY A.D.A. STANDARDS MAY NOT BE DESIRABLE. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visti elkayusa.com for most current version of Elkay product specification sheets. Elkay elkayusa.com This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of others producers offerings, be certain these featrues are not overlooked Camden Court Oak Brook, IL Printed in U.S.A Elkay (Rev. 06/10) 1-21J

58 Spec Seq#: 44 Lustertone Single Bowl Classroom Sinks and Sink Packages Double Ledge Models DRKR and DRKRQ Series Models DRKAD and DRKADQ Series A.D.A. Compliant SPECIFICATIONS SINK DIMENSIONS* U-Channel Model Number Quick-Clip Model Number DRKR2220C DRKRQ2220C DRKR2220 DRKRQ2220 DRKR2517C DRKRQ2517C Cutout in Countertop [11/ 2" (38mm) Radius Corners] L W No. of Faucet Holes (see back page) 31/ 2" (59mm) Drain Opening (see above for details) / 2 131/ / 8 213/ 8 187/ 8 (559mm) (495mm) (343mm) (406mm) (194mm) (543mm) (479mm) 4 Centered 27 (686mm) / 2 131/ / 8 213/ 8 187/ 8 (559mm) (495mm) (343mm) (406mm) (194mm) (543mm) (479mm) 2, 2LM or 4 Centered 27 (686mm) / 2 7 5/ 8 243/ 8 163/ 8 (635mm) (432mm) (406mm) (343mm) (194mm) (619mm) (416mm) 4 Centered 30 (762mm) Overall L A W B L C Inside Bowl W D D E Minimum Cabinet Size DRKR2517 DRKRQ / 2 7 5/ 8 243/ 8 163/ 8 (635mm) (432mm) (406mm) (343mm) (194mm) (619mm) (416mm) 2, 2LM or 4 Centered 30 (762mm) DRKR2522 DRKRQ / 8 243/ 8 213/ 8 (635mm) (559mm) (406mm) (343mm) (194mm) (619mm) (416mm) 2, 2LM or 4 Centered 30 (762mm) / / 8 303/ 8 187/ 8 (787mm) (495mm) (559mm) (406mm) (194mm) (772mm) (479mm) 4 Centered 36 (914mm) / / 8 303/ 8 187/ 8 (787mm) (495mm) (559mm) (406mm) (194mm) (772mm) (479mm) 2, 2LM or 4 Centered 36 (914mm) DRKR3119C DRKRQ3119C DRKR3119 DRKRQ3119 DRKAD2220C DRKAD2220 DRKADQ2220C DRKADQ2220 DRKAD2517C DRKADQ2517C / 2 131/ 2 16 (559mm) (495mm) (343mm) (406mm) ** 213/ 8 187/ 8 (543mm) (479mm) 4 Off-Centered 27 (686mm) / 2 131/ 2 16 (559mm) (495mm) (343mm) (406mm) ** 213/ 8 187/ 8 (543mm) (479mm) 2, 2LM or 4 Off-Centered 27 (686mm) / 2 (635mm) (432mm) (406mm) (343mm) ** 243/ 8 163/ 8 (619mm) (416mm) 4 Off-Centered 30 (762mm) DRKAD2517 DRKADQ / 2 (635mm) (432mm) (406mm) (343mm) ** 243/ 8 163/ 8 (619mm) (416mm) 2, 2LM or 4 Off-Centered 30 (762mm) DRKAD2522 DRKADQ (635mm) (559mm) (406mm) (343mm) ** 243/ 8 213/ 8 (619mm) (416mm) 2, 2LM or 4 Off-Centered 30 (762mm) / (787mm) (495mm) (559mm) (406mm) ** 303/ 8 187/ 8 (772mm) (479mm) 4 Off-Centered 36 (914mm) / (787mm) (495mm) (559mm) (406mm) ** 303/ 8 187/ 8 (772mm) (479mm) 2, 2LM or 4 Off-Centered 36 (914mm) DRKAD3119C DRKAD3119 DRKADQ3119C DRKADQ3119 * Length is left to right. Width is front to back. Unless otherwise specified, all sinks which do not have suffix C are less fittings (no faucet, bubbler or drain), but are drilled for faucet, bubbler and drain as illustrated. ** Available in 4" (102mm), 4-1/2" (114mm), 5" (127mm), 5-1/2" (140mm), 6" (152mm) or 6-1/2" (165mm) depths. Please consult your sales representative for other depths or modifications. 5" D D B B 1-3/4" (44mm) R 1-3/4" (44mm) R C A 1-3/4" (44mm) R DRKAD(Q) Series Off-Centered Drain Elkay 1-21J (Rev. 06/10) C A E 1-3/4" (44mm) R E DRKR(Q) and DRKAD(Q) Series Centered Drain 2222 Camden Court Oak Brook, IL elkayusa.com Printed in U.S.A Elkay

59 Spec Seq#: 44 Lustertone Single Bowl Classroom Sinks and Sink Packages Double Ledge Models DRKR and DRKRQ Series Models DRKAD and DRKADQ Series A.D.A. Compliant SPECIFICATIONS HOLE DRILLING CONFIGURATIONS 3" MODELS DRKAD(Q)2517**2 (76mm) DRKAD(Q)2220**2 DRKAD(Q)2522**2 DRKAD(Q)3119**2 2 HOLE CONFIGURATION Off-Centered Drain Centered Drain * * 3" (76mm) MODELS DRKR(Q)22202 DRKR(Q)25172 DRKR(Q) " DRKR(Q)31192 (76mm) 3" (76mm) SLOTTED HOLE (2 PLACES) SLOTTED HOLE (2 PLACES) * * 2LM (LEFT MIDDLE) HOLE CONFIGURATION Off-Centered Drain Centered Drain * * MODELS DRKAD(Q)2517**2LM DRKAD(Q)2220**2LM DRKAD(Q)2522**2LM DRKAD(Q)3119**2LM 3" (76mm) Cent er 1-1/2" (38mm) SLOTTED DIA. HOLE HOLE (1 PLACE) (1 PLACE) MODELS DRKR(Q)22202LM DRKR(Q)25172LM DRKR(Q)25222LM DRKR(Q)31192LM 3" (76mm) Cent er 1-1/2" (38mm) SLOTTED DIA. HOLE HOLE (1 PLACE) (1 PLACE) * * 4 HOLE CONFIGURATION Off-Centered Drain Centered Drain * * MODELS DRKAD(Q)2517**4 DRKAD(Q)2220**4 DRKAD(Q)2522**4 DRKAD(Q)3119**4 4" (102mm) MODELS DRKR(Q)22204 DRKR(Q)25174 DRKR(Q) " DRKR(Q)31194 (76mm) 4" (102mm) 3" 1-1/2" (38mm) DIA. HOLE (3 PLACES) SLOTTED HOLE (1 PLACE) * 1-1/2" (38mm) SLOTTED DIA. HOLE HOLE (3 PLACES) (1 PLACE) * *2-1/2" (64mm) for DRKR(Q)2522 and DRKAD(Q)2522, 2-1/4" (57mm) for all others. **Bowl depths for ADA models: 40 = 4 (102mm), 45 = 4-1/2 (114mm), 50 = 5 (127mm), 55 = 5-1/2" (140mm), 60 = 6" (152mm), 65 = 6-1/2" (165mm). U-Channel Type Mounting System Slotted Hole Quick-Clip Mounting system 1-1/8" (29mm) DIA. Elkay elkayusa.com 2222 Camden Court Oak Brook, IL Printed in U.S.A Elkay (Rev. 06/10) 1-21J

60 Spec Seq#: 45 WIDESPREAD Z831B4-XL TAG Engineering Specifications: Zurn AquaSpec Z831B4-XL Polished chrome-plated widespread with adjustable centers from 6" [152mm] to 20 [508mm], a 5-3/8" [137mm] centerline rigid or swing gooseneck spout and quarter turn ceramic disc cartridges. Unit is furnished with a 2.2 GPM [8.3 L] pressure compensating aerator (complying with ANSI A Standard for flow), 4" [102mm] vandal-resistant color-coded metal wrist blade handles, mounting hardware and 1/2" NPSM coupling nuts for standard lavatory risers. Widespread accomodates installations up to 1-1/8" [29mm] thick. Zurn Lead Free products (-XL), is the line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn Lead Free products (-XL) are manufactured with less than one quarter of one percent (0.25%) total lead content by weighted average. Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -CWO Cold Water Only -FC 2.0 GPM [7.6 L] Laminar Flow Control in Base of Spout -G 1-1/4" [32mm] Grid Strainer Drain -GH 1-1/4" [32mm] Offset Handicap Grid Drain -HCT Hot/Cold Text Indexes -HS Hose and Spray -ICT Inter-connecting Copper Supply Tubes for 8 In-line Centers -P 1-1/4" [32mm] Pop-up Drain -PT 1-1/4 [32mm] Cast Brass P-Trap with a 7-1/2 [191mm] Long 17-Gauge Wall Bend -TW Third Waterway -2F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Aerator -3F 0.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Female Spray Outlet -4F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Laminar Flow Outlet -7F 1.0 GPM [3.8L] Pressure Compensating Female Spray Outlet -16F 1.0 GPM [3.8L] Vandal-Resistant Pressure Compensating Female Spray Outlet -17F 1.5 GPM [5.7L] Vandal-Resistant Pressure Compensating Female Aerator -18F 1.5 GPM [5.7L] Vandal-Resistant Pressure Compensating Female Laminar Flow Outlet -19F 1.5 GPM [5.7 L] Anti-Microbial Pressure Compensating Female Laminar Flow Outlet -20F 1.0 GPM [3.8L] Vandal-Resistant Pressure Compensating Anti-Microbial Female Laminar Flow Outlet -21F 1.0 GPM [3.8L] Female Laminar Flow Outlet -22F 1.0 GPM [3.8L] Vandal-Resistant Female Laminar Flow Outlet ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2009 Zurn Industries, LLC Rev. Date: 4/2/09 C.N. No Dwg. No Product No. Z831B4-XL

61 Spec Seq#: 46 BUBBLER Z83600-XL TAG Engineering Specification: Zurn AquaSpec Z83600-XL Polished chrome plated cast brass self-closing bubbler with an internal filter, an angled stream nozzle, a cast metal push handle, a flexible mouth guard with Biosafe antimicrobial technology, and a manual volume control. Zurn Lead Compliant* XL products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn XL products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code ; Vermont 9 VCA 2470h Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -AR Anti-Rotation Pins -CS Check Stop -PC Polished Chrome Plated Brass Mouth Guard -RKR ADA Compliant Rocker Handle ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2010 Zurn Industries, LLC Rev. B Date: 7/28/10 C.N. No Dwg. No Product No. Z83600-XL

62 Spec Seq#: 47 BASKET STRAINER Z8740-PC TO Z SS TAG Engineering Specification: Zurn Z8740-PC TO Z SS Heavy duty forged basket strainer with matching basket and 1 1/2[38] x 4[102] 20 gauge tailpiece with cast brass locknut and cast brass tailpiece nut. Note: All dimensions are for reference only. Do not use for pre-plumbing PRODUCT MATERIAL DIMENSIONS MASTER WEIGHT NUMBER C ØD CARTON CARTON Z8740-PC CHROME PLATED BRASS 2 1/8[54] 4 1/2[114] Z8741-SS STAINLESS STEEL (SS430) 2 3/4[70] 4 3/8[111] Z SS STAINLESS STEEL (SS430) W/ 17GA. TAILPIECE 2 3/4[70] 4 3/8[111] OPTIONAL ACCESSORIES Suffix Description -LTLBN Less Tailpiece, with zinc locknut and cast brass tailpiece nut ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2010 Zurn Industries, LLC Rev. D Date: 2/12/10 C.N. No Dwg. No Product No. Z8740-PC - Z SS

63 BRASS TRAP PRODUCT SPECIFICATIONS Spec Seq#: 48 Job Name: Job Location: For Commercial & Residential Applications Contractor: Approval: Tube S-Trap Tube P-Trap with clean out Tube P-Trap less clean out Sink P-Trap Semi-Cast P-Trap with clean out ML10372 ML10362 ML10356,ML10355,ML10357, ML10358, ML10359,ML10360, ML10361,ML10366, ML10367, ML10368, ML10369, ML10370, ML10371 ML10373, ML10374, ML10375 ML10364, ML10365 To Dimensions (inches) Submit Part No. Description A B C D E F ML /2" 20GA Tube P-TrapCP ML /2" 22GA Tube P-Trap CP ML /2" 20GA Tube P-Trap w/deep Flange CP ML /2" 17GA Tube P-Trap CP ML /2" 17GA Tube P-Trap w/deep Flange CP ML /2" 17GA G/J Tube P-Trap BR/Nut CP ML /2" 17GA G/J Tube P-Trap BR/Nut RB ML /2" 17GA Tube P-Trap w/cleanout CP ML /2" 17GA Semi Cast P-Trap BR/Nut w/cleanout CP ML /4" 17GA Semi Cast P-Trap w/cleanout CP ML /4" 22GA Tube P-Trap CP ML /4" 22GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube P-Trap CP ML /4" 20GA Tube P-Trap w/deep Flange CP ML /4" 17GA Tube P-Trap CP ML /4" 17GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube S-Trap w/deep Flange CP ML /2" 22GA Sink P-Trap CP ML /2" 17GA G/J Sink P-Trap BR/Nut CP ML /2" 17GA G/J Sink P-Trap BR/Nut RB Warranty See warranty information for more details MAINLINE reserves the right to make product and material changes at any time without notice. Mainline Brass Trap Spec rev

64 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 49 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

65 -- S-3 -- Spec Seq#: 50

66 Spec Seq#: 51 SPECIFICATIONS Lustertone Single Bowl Sink Models LRAD and LRADQ Series A.D.A. Compliant GENERAL Highest quality sink seamlessly formed of #18 gauge, type 304 (18-8) nickel bearing stainless steel. Self-rimming. DESIGN FEATURES LRAD(Q) Bowl Depth: 4", 4-1/2", 5", 5-1/2", 6" or 6-1/2". Coved Corners: 1-3/4" vertical and horizontal radius. Bowl and Faucet Deck Recess: 3/16" below outside edge of sink. Finish: Exposed surfaces are hand blended to a lustrous highlighted satin finish. Underside: Fully undercoated to dampen sound and prevent condensation. OTHER Drain Opening: 3-1/2" (see back for locations). NOTE: Unless otherwise specified, models with one, two, three or OS4 faucet hole option are furnished with 3 faucet holes as shown; models with choice of one, two, three, four or five faucet hole option are furnished with 4 faucet holes standard. SINK DIMENSIONS (INCHES)* Model LRAD(Q) Cutout in Countertop Overall Inside Bowl No. of 3 1 /2" U-Channel Quick-Clip (1 1 /2" Radius 1 1 /2" Dia. Drain Opening Minimum Ship. Model Model L W L W D Corners) Faucet Holes (see back Cabinet Wt. Number Number A B C D E L W 4" Center for details) Size Lbs. LRAD1316 LRADQ ** 12 3 / /8 1, 2, MR2 or 3 Centered /2 LRAD1517 LRADQ / ** 14 3 / /8 1, 2, MR2 or 3 Centered /4 LRAD1522 LRADQ /2 16 ** 14 3 / /8 1, 2, MR2 or 3 Off-Centered Rear LRAD1716 LRADQ ** 16 3 / /8 1, 2, MR2, 3 or OS4 Centered /2 LRAD1720 LRADQ ** 16 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear LRAD1722 LRADQ /2 16 ** 16 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear LRAD1918 LRADQ /2 ** 18 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear /2 LRAD1918L LRADQ1918L /2 ** 18 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Left /2 LRAD1918R LRADQ1918R /2 ** 18 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Right /2 LRAD1919 LRADQ / /2 ** 18 7 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear LRAD2022 LRADQ / ** 18 7 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear /2 LRAD2219 LRADQ / ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear LRAD2219L LRADQ2219L / ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Left LRAD2219R LRADQ2219R / ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Right LRAD2222 LRADQ ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear LRAD2521 LRADQ / /4 ** 24 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear LRAD2521L LRADQ2521L / /4 ** 24 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Left LRAD2521R LRADQ2521R / /4 ** 24 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Right LRAD3122 LRADQ ** 30 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear *Length is left to right. Width is front to back. **Available in 4", 4 1 /2", 5", 5 1 /2", 6" and 6 1 /2" depths. Please consult your sales representative for other depths or modifications. 4" 4" 1-3/4" R D B 1-3/4"R E THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS. THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE. C A ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Elkay Camden Court Oak Brook, IL This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers offerings, be certain these features are not overlooked. Printed in U.S.A Elkay (Rev. 12/09) 1-135G

67 Spec Seq#: 51 Lustertone Single Bowl Sink Models LRAD and LRADQ Series A.D.A. Compliant SPECIFICATIONS DRAIN OPENING LOCATIONS 5" 4-1/2" for LRAD(Q)1522 Off-Centered Rear Centered 5" 5" 5" 5" Off-Centered Left Off-Centered Right HOLE DRILLING CONFIGURATIONS 4" 4" 4" 1 4" 4 4" 4" 4" 2 OS4 4" 4" 4" 4" 4" MR2 5 4" 4" 3 Quick-Clip Mounting System U-Channel Type Mounting System Elkay 1-135G (Rev. 12/09) 2222 Camden Court Oak Brook, IL Printed in U.S.A Elkay

68 Spec Seq#: 52 WIDESPREAD Z831B4-XL TAG Engineering Specifications: Zurn AquaSpec Z831B4-XL Polished chrome-plated widespread with adjustable centers from 6" [152mm] to 20 [508mm], a 5-3/8" [137mm] centerline rigid or swing gooseneck spout and quarter turn ceramic disc cartridges. Unit is furnished with a 2.2 GPM [8.3 L] pressure compensating aerator (complying with ANSI A Standard for flow), 4" [102mm] vandal-resistant color-coded metal wrist blade handles, mounting hardware and 1/2" NPSM coupling nuts for standard lavatory risers. Widespread accomodates installations up to 1-1/8" [29mm] thick. Zurn Lead Free products (-XL), is the line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn Lead Free products (-XL) are manufactured with less than one quarter of one percent (0.25%) total lead content by weighted average. Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -CWO Cold Water Only -FC 2.0 GPM [7.6 L] Laminar Flow Control in Base of Spout -G 1-1/4" [32mm] Grid Strainer Drain -GH 1-1/4" [32mm] Offset Handicap Grid Drain -HCT Hot/Cold Text Indexes -HS Hose and Spray -ICT Inter-connecting Copper Supply Tubes for 8 In-line Centers -P 1-1/4" [32mm] Pop-up Drain -PT 1-1/4 [32mm] Cast Brass P-Trap with a 7-1/2 [191mm] Long 17-Gauge Wall Bend -TW Third Waterway -2F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Aerator -3F 0.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Female Spray Outlet -4F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Laminar Flow Outlet -7F 1.0 GPM [3.8L] Pressure Compensating Female Spray Outlet -16F 1.0 GPM [3.8L] Vandal-Resistant Pressure Compensating Female Spray Outlet -17F 1.5 GPM [5.7L] Vandal-Resistant Pressure Compensating Female Aerator -18F 1.5 GPM [5.7L] Vandal-Resistant Pressure Compensating Female Laminar Flow Outlet -19F 1.5 GPM [5.7 L] Anti-Microbial Pressure Compensating Female Laminar Flow Outlet -20F 1.0 GPM [3.8L] Vandal-Resistant Pressure Compensating Anti-Microbial Female Laminar Flow Outlet -21F 1.0 GPM [3.8L] Female Laminar Flow Outlet -22F 1.0 GPM [3.8L] Vandal-Resistant Female Laminar Flow Outlet ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2009 Zurn Industries, LLC Rev. Date: 4/2/09 C.N. No Dwg. No Product No. Z831B4-XL

69 Spec Seq#: 53 BASKET STRAINER Z8740-PC TO Z SS TAG Engineering Specification: Zurn Z8740-PC TO Z SS Heavy duty forged basket strainer with matching basket and 1 1/2[38] x 4[102] 20 gauge tailpiece with cast brass locknut and cast brass tailpiece nut. Note: All dimensions are for reference only. Do not use for pre-plumbing PRODUCT MATERIAL DIMENSIONS MASTER WEIGHT NUMBER C ØD CARTON CARTON Z8740-PC CHROME PLATED BRASS 2 1/8[54] 4 1/2[114] Z8741-SS STAINLESS STEEL (SS430) 2 3/4[70] 4 3/8[111] Z SS STAINLESS STEEL (SS430) W/ 17GA. TAILPIECE 2 3/4[70] 4 3/8[111] OPTIONAL ACCESSORIES Suffix Description -LTLBN Less Tailpiece, with zinc locknut and cast brass tailpiece nut ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2010 Zurn Industries, LLC Rev. D Date: 2/12/10 C.N. No Dwg. No Product No. Z8740-PC - Z SS

70 BRASS TRAP PRODUCT SPECIFICATIONS Spec Seq#: 54 Job Name: Job Location: For Commercial & Residential Applications Contractor: Approval: Tube S-Trap Tube P-Trap with clean out Tube P-Trap less clean out Sink P-Trap Semi-Cast P-Trap with clean out ML10372 ML10362 ML10356,ML10355,ML10357, ML10358, ML10359,ML10360, ML10361,ML10366, ML10367, ML10368, ML10369, ML10370, ML10371 ML10373, ML10374, ML10375 ML10364, ML10365 To Dimensions (inches) Submit Part No. Description A B C D E F ML /2" 20GA Tube P-TrapCP ML /2" 22GA Tube P-Trap CP ML /2" 20GA Tube P-Trap w/deep Flange CP ML /2" 17GA Tube P-Trap CP ML /2" 17GA Tube P-Trap w/deep Flange CP ML /2" 17GA G/J Tube P-Trap BR/Nut CP ML /2" 17GA G/J Tube P-Trap BR/Nut RB ML /2" 17GA Tube P-Trap w/cleanout CP ML /2" 17GA Semi Cast P-Trap BR/Nut w/cleanout CP ML /4" 17GA Semi Cast P-Trap w/cleanout CP ML /4" 22GA Tube P-Trap CP ML /4" 22GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube P-Trap CP ML /4" 20GA Tube P-Trap w/deep Flange CP ML /4" 17GA Tube P-Trap CP ML /4" 17GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube S-Trap w/deep Flange CP ML /2" 22GA Sink P-Trap CP ML /2" 17GA G/J Sink P-Trap BR/Nut CP ML /2" 17GA G/J Sink P-Trap BR/Nut RB Warranty See warranty information for more details MAINLINE reserves the right to make product and material changes at any time without notice. Mainline Brass Trap Spec rev

71 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 55 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

72 -- S-4 -- Spec Seq#: 56

73 Spec Seq#: 57 Lustertone Single Bowl Classroom Sinks and Sink Packages Double Ledge Models DRKR and DRKRQ Series Models DRKAD and DRKADQ Series A.D.A. Compliant SPECIFICATIONS GENERAL Highest quality sink bowl seamlessly formed of #18 (1.2mm) gauge, type 304 (18-8) nickel bearing stainless steel. Top Mount. CLASSROOM/ INSTITUTIONAL SINK PACKAGES Models DRKR(Q)2220C, DRKR(Q)2517C, DRKR(Q)3119C, DRKAD(Q)2220C, DRKAD(Q)2517C, and DRKAD(Q)3119C feature a scratch and crack resistant stainless steel sink, Contemporary Hi-Arc faucet and No Lead Flexi-Guard Bubbler. Package includes: (1) LK2439 Two-handle Contemporary Hi-Arc concealed undermount faucet with 45 restricted swing spout and aerator. Outlet height: 10" (254mm); Reach: 6-1/2" (165mm). No spray. (1) LK1141A No Lead Flexi-Guard Bubbler. Pushbutton valve design bubbler meets ANSI and ADA requirements. Designed so that water never comes in contact with leadcontaining materials. Flexi-Guard safety bubbler flexes on impact to prevent accidental injury when getting a drink. Built-in adjustable water volume control. (1) LK35 Duo strainer. Model DRKR(Q)2517C OTHER DRKAD(Q)2517, DRKAD(Q)2220, DRKAD(Q)2522 and DRKAD(Q)3119 drain opening is 3-1/2" (89mm) and located centered left-to-right and off-center front-to-back as illustrated. All other drain opening sizes are 3-1/2" (89mm) and centered in bowl as illustrated. Slotted hole allows for vandal-resistant faucet and bubbler. NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown (see back page). Sink complies with ASME A / CSA B Both the faucet and the bubbler are classified by Underwriters Laboratories Inc. to NSF/ANSI61 for residential use. SEE NEXT PAGE FOR PRODUCT DIMENSIONS. SINKS ARE MADE IN THE USA THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS. THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISIFY A.D.A. STANDARDS MAY NOT BE DESIRABLE. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visti elkayusa.com for most current version of Elkay product specification sheets. Elkay elkayusa.com This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of others producers offerings, be certain these featrues are not overlooked Camden Court Oak Brook, IL Printed in U.S.A Elkay (Rev. 06/10) 1-21J

74 Spec Seq#: 57 Lustertone Single Bowl Classroom Sinks and Sink Packages Double Ledge Models DRKR and DRKRQ Series Models DRKAD and DRKADQ Series A.D.A. Compliant SPECIFICATIONS SINK DIMENSIONS* U-Channel Model Number Quick-Clip Model Number DRKR2220C DRKRQ2220C DRKR2220 DRKRQ2220 DRKR2517C DRKRQ2517C Cutout in Countertop [11/ 2" (38mm) Radius Corners] L W No. of Faucet Holes (see back page) 31/ 2" (59mm) Drain Opening (see above for details) / 2 131/ / 8 213/ 8 187/ 8 (559mm) (495mm) (343mm) (406mm) (194mm) (543mm) (479mm) 4 Centered 27 (686mm) / 2 131/ / 8 213/ 8 187/ 8 (559mm) (495mm) (343mm) (406mm) (194mm) (543mm) (479mm) 2, 2LM or 4 Centered 27 (686mm) / 2 7 5/ 8 243/ 8 163/ 8 (635mm) (432mm) (406mm) (343mm) (194mm) (619mm) (416mm) 4 Centered 30 (762mm) Overall L A W B L C Inside Bowl W D D E Minimum Cabinet Size DRKR2517 DRKRQ / 2 7 5/ 8 243/ 8 163/ 8 (635mm) (432mm) (406mm) (343mm) (194mm) (619mm) (416mm) 2, 2LM or 4 Centered 30 (762mm) DRKR2522 DRKRQ / 8 243/ 8 213/ 8 (635mm) (559mm) (406mm) (343mm) (194mm) (619mm) (416mm) 2, 2LM or 4 Centered 30 (762mm) / / 8 303/ 8 187/ 8 (787mm) (495mm) (559mm) (406mm) (194mm) (772mm) (479mm) 4 Centered 36 (914mm) / / 8 303/ 8 187/ 8 (787mm) (495mm) (559mm) (406mm) (194mm) (772mm) (479mm) 2, 2LM or 4 Centered 36 (914mm) DRKR3119C DRKRQ3119C DRKR3119 DRKRQ3119 DRKAD2220C DRKAD2220 DRKADQ2220C DRKADQ2220 DRKAD2517C DRKADQ2517C / 2 131/ 2 16 (559mm) (495mm) (343mm) (406mm) ** 213/ 8 187/ 8 (543mm) (479mm) 4 Off-Centered 27 (686mm) / 2 131/ 2 16 (559mm) (495mm) (343mm) (406mm) ** 213/ 8 187/ 8 (543mm) (479mm) 2, 2LM or 4 Off-Centered 27 (686mm) / 2 (635mm) (432mm) (406mm) (343mm) ** 243/ 8 163/ 8 (619mm) (416mm) 4 Off-Centered 30 (762mm) DRKAD2517 DRKADQ / 2 (635mm) (432mm) (406mm) (343mm) ** 243/ 8 163/ 8 (619mm) (416mm) 2, 2LM or 4 Off-Centered 30 (762mm) DRKAD2522 DRKADQ (635mm) (559mm) (406mm) (343mm) ** 243/ 8 213/ 8 (619mm) (416mm) 2, 2LM or 4 Off-Centered 30 (762mm) / (787mm) (495mm) (559mm) (406mm) ** 303/ 8 187/ 8 (772mm) (479mm) 4 Off-Centered 36 (914mm) / (787mm) (495mm) (559mm) (406mm) ** 303/ 8 187/ 8 (772mm) (479mm) 2, 2LM or 4 Off-Centered 36 (914mm) DRKAD3119C DRKAD3119 DRKADQ3119C DRKADQ3119 * Length is left to right. Width is front to back. Unless otherwise specified, all sinks which do not have suffix C are less fittings (no faucet, bubbler or drain), but are drilled for faucet, bubbler and drain as illustrated. ** Available in 4" (102mm), 4-1/2" (114mm), 5" (127mm), 5-1/2" (140mm), 6" (152mm) or 6-1/2" (165mm) depths. Please consult your sales representative for other depths or modifications. 5" D D B B 1-3/4" (44mm) R 1-3/4" (44mm) R C A 1-3/4" (44mm) R DRKAD(Q) Series Off-Centered Drain Elkay 1-21J (Rev. 06/10) C A E 1-3/4" (44mm) R E DRKR(Q) and DRKAD(Q) Series Centered Drain 2222 Camden Court Oak Brook, IL elkayusa.com Printed in U.S.A Elkay

75 Spec Seq#: 57 Lustertone Single Bowl Classroom Sinks and Sink Packages Double Ledge Models DRKR and DRKRQ Series Models DRKAD and DRKADQ Series A.D.A. Compliant SPECIFICATIONS HOLE DRILLING CONFIGURATIONS 3" MODELS DRKAD(Q)2517**2 (76mm) DRKAD(Q)2220**2 DRKAD(Q)2522**2 DRKAD(Q)3119**2 2 HOLE CONFIGURATION Off-Centered Drain Centered Drain * * 3" (76mm) MODELS DRKR(Q)22202 DRKR(Q)25172 DRKR(Q) " DRKR(Q)31192 (76mm) 3" (76mm) SLOTTED HOLE (2 PLACES) SLOTTED HOLE (2 PLACES) * * 2LM (LEFT MIDDLE) HOLE CONFIGURATION Off-Centered Drain Centered Drain * * MODELS DRKAD(Q)2517**2LM DRKAD(Q)2220**2LM DRKAD(Q)2522**2LM DRKAD(Q)3119**2LM 3" (76mm) Cent er 1-1/2" (38mm) SLOTTED DIA. HOLE HOLE (1 PLACE) (1 PLACE) MODELS DRKR(Q)22202LM DRKR(Q)25172LM DRKR(Q)25222LM DRKR(Q)31192LM 3" (76mm) Cent er 1-1/2" (38mm) SLOTTED DIA. HOLE HOLE (1 PLACE) (1 PLACE) * * 4 HOLE CONFIGURATION Off-Centered Drain Centered Drain * * MODELS DRKAD(Q)2517**4 DRKAD(Q)2220**4 DRKAD(Q)2522**4 DRKAD(Q)3119**4 4" (102mm) MODELS DRKR(Q)22204 DRKR(Q)25174 DRKR(Q) " DRKR(Q)31194 (76mm) 4" (102mm) 3" 1-1/2" (38mm) DIA. HOLE (3 PLACES) SLOTTED HOLE (1 PLACE) * 1-1/2" (38mm) SLOTTED DIA. HOLE HOLE (3 PLACES) (1 PLACE) * *2-1/2" (64mm) for DRKR(Q)2522 and DRKAD(Q)2522, 2-1/4" (57mm) for all others. **Bowl depths for ADA models: 40 = 4 (102mm), 45 = 4-1/2 (114mm), 50 = 5 (127mm), 55 = 5-1/2" (140mm), 60 = 6" (152mm), 65 = 6-1/2" (165mm). U-Channel Type Mounting System Slotted Hole Quick-Clip Mounting system 1-1/8" (29mm) DIA. Elkay elkayusa.com 2222 Camden Court Oak Brook, IL Printed in U.S.A Elkay (Rev. 06/10) 1-21J

76 Spec Seq#: 58 WIDESPREAD Z831B4-XL TAG Engineering Specifications: Zurn AquaSpec Z831B4-XL Polished chrome-plated widespread with adjustable centers from 6" [152mm] to 20 [508mm], a 5-3/8" [137mm] centerline rigid or swing gooseneck spout and quarter turn ceramic disc cartridges. Unit is furnished with a 2.2 GPM [8.3 L] pressure compensating aerator (complying with ANSI A Standard for flow), 4" [102mm] vandal-resistant color-coded metal wrist blade handles, mounting hardware and 1/2" NPSM coupling nuts for standard lavatory risers. Widespread accomodates installations up to 1-1/8" [29mm] thick. Zurn Lead Free products (-XL), is the line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn Lead Free products (-XL) are manufactured with less than one quarter of one percent (0.25%) total lead content by weighted average. Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -CWO Cold Water Only -FC 2.0 GPM [7.6 L] Laminar Flow Control in Base of Spout -G 1-1/4" [32mm] Grid Strainer Drain -GH 1-1/4" [32mm] Offset Handicap Grid Drain -HCT Hot/Cold Text Indexes -HS Hose and Spray -ICT Inter-connecting Copper Supply Tubes for 8 In-line Centers -P 1-1/4" [32mm] Pop-up Drain -PT 1-1/4 [32mm] Cast Brass P-Trap with a 7-1/2 [191mm] Long 17-Gauge Wall Bend -TW Third Waterway -2F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Aerator -3F 0.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Female Spray Outlet -4F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Laminar Flow Outlet -7F 1.0 GPM [3.8L] Pressure Compensating Female Spray Outlet -16F 1.0 GPM [3.8L] Vandal-Resistant Pressure Compensating Female Spray Outlet -17F 1.5 GPM [5.7L] Vandal-Resistant Pressure Compensating Female Aerator -18F 1.5 GPM [5.7L] Vandal-Resistant Pressure Compensating Female Laminar Flow Outlet -19F 1.5 GPM [5.7 L] Anti-Microbial Pressure Compensating Female Laminar Flow Outlet -20F 1.0 GPM [3.8L] Vandal-Resistant Pressure Compensating Anti-Microbial Female Laminar Flow Outlet -21F 1.0 GPM [3.8L] Female Laminar Flow Outlet -22F 1.0 GPM [3.8L] Vandal-Resistant Female Laminar Flow Outlet ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: World Wide Web: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2009 Zurn Industries, LLC Rev. Date: 4/2/09 C.N. No Dwg. No Product No. Z831B4-XL

77 Spec Seq#: 59 BUBBLER Z83600-XL TAG Engineering Specification: Zurn AquaSpec Z83600-XL Polished chrome plated cast brass self-closing bubbler with an internal filter, an angled stream nozzle, a cast metal push handle, a flexible mouth guard with Biosafe antimicrobial technology, and a manual volume control. Zurn Lead Compliant* XL products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn XL products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code ; Vermont 9 VCA 2470h Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -AR Anti-Rotation Pins -CS Check Stop -PC Polished Chrome Plated Brass Mouth Guard -RKR ADA Compliant Rocker Handle ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2010 Zurn Industries, LLC Rev. B Date: 7/28/10 C.N. No Dwg. No Product No. Z83600-XL

78 Spec Seq#: 60 BASKET STRAINER Z8740-PC TO Z SS TAG Engineering Specification: Zurn Z8740-PC TO Z SS Heavy duty forged basket strainer with matching basket and 1 1/2[38] x 4[102] 20 gauge tailpiece with cast brass locknut and cast brass tailpiece nut. Note: All dimensions are for reference only. Do not use for pre-plumbing PRODUCT MATERIAL DIMENSIONS MASTER WEIGHT NUMBER C ØD CARTON CARTON Z8740-PC CHROME PLATED BRASS 2 1/8[54] 4 1/2[114] Z8741-SS STAINLESS STEEL (SS430) 2 3/4[70] 4 3/8[111] Z SS STAINLESS STEEL (SS430) W/ 17GA. TAILPIECE 2 3/4[70] 4 3/8[111] OPTIONAL ACCESSORIES Suffix Description -LTLBN Less Tailpiece, with zinc locknut and cast brass tailpiece nut ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2010 Zurn Industries, LLC Rev. D Date: 2/12/10 C.N. No Dwg. No Product No. Z8740-PC - Z SS

79 BRASS TRAP PRODUCT SPECIFICATIONS Spec Seq#: 61 Job Name: Job Location: For Commercial & Residential Applications Contractor: Approval: Tube S-Trap Tube P-Trap with clean out Tube P-Trap less clean out Sink P-Trap Semi-Cast P-Trap with clean out ML10372 ML10362 ML10356,ML10355,ML10357, ML10358, ML10359,ML10360, ML10361,ML10366, ML10367, ML10368, ML10369, ML10370, ML10371 ML10373, ML10374, ML10375 ML10364, ML10365 To Dimensions (inches) Submit Part No. Description A B C D E F ML /2" 20GA Tube P-TrapCP ML /2" 22GA Tube P-Trap CP ML /2" 20GA Tube P-Trap w/deep Flange CP ML /2" 17GA Tube P-Trap CP ML /2" 17GA Tube P-Trap w/deep Flange CP ML /2" 17GA G/J Tube P-Trap BR/Nut CP ML /2" 17GA G/J Tube P-Trap BR/Nut RB ML /2" 17GA Tube P-Trap w/cleanout CP ML /2" 17GA Semi Cast P-Trap BR/Nut w/cleanout CP ML /4" 17GA Semi Cast P-Trap w/cleanout CP ML /4" 22GA Tube P-Trap CP ML /4" 22GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube P-Trap CP ML /4" 20GA Tube P-Trap w/deep Flange CP ML /4" 17GA Tube P-Trap CP ML /4" 17GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube S-Trap w/deep Flange CP ML /2" 22GA Sink P-Trap CP ML /2" 17GA G/J Sink P-Trap BR/Nut CP ML /2" 17GA G/J Sink P-Trap BR/Nut RB Warranty See warranty information for more details MAINLINE reserves the right to make product and material changes at any time without notice. Mainline Brass Trap Spec rev

80 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 62 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

81 -- S-5/S-6 -- Spec Seq#: 63

82 Spec Seq#: 64 SPECIFICATIONS Lustertone Single Bowl Sink Models LRAD and LRADQ Series A.D.A. Compliant GENERAL Highest quality sink seamlessly formed of #18 gauge, type 304 (18-8) nickel bearing stainless steel. Self-rimming. DESIGN FEATURES LRAD(Q) Bowl Depth: 4", 4-1/2", 5", 5-1/2", 6" or 6-1/2". Coved Corners: 1-3/4" vertical and horizontal radius. Bowl and Faucet Deck Recess: 3/16" below outside edge of sink. Finish: Exposed surfaces are hand blended to a lustrous highlighted satin finish. Underside: Fully undercoated to dampen sound and prevent condensation. OTHER Drain Opening: 3-1/2" (see back for locations). NOTE: Unless otherwise specified, models with one, two, three or OS4 faucet hole option are furnished with 3 faucet holes as shown; models with choice of one, two, three, four or five faucet hole option are furnished with 4 faucet holes standard. SINK DIMENSIONS (INCHES)* Model LRAD(Q) Cutout in Countertop Overall Inside Bowl No. of 3 1 /2" U-Channel Quick-Clip (1 1 /2" Radius 1 1 /2" Dia. Drain Opening Minimum Ship. Model Model L W L W D Corners) Faucet Holes (see back Cabinet Wt. Number Number A B C D E L W 4" Center for details) Size Lbs. LRAD1316 LRADQ ** 12 3 / /8 1, 2, MR2 or 3 Centered /2 LRAD1517 LRADQ / ** 14 3 / /8 1, 2, MR2 or 3 Centered /4 LRAD1522 LRADQ /2 16 ** 14 3 / /8 1, 2, MR2 or 3 Off-Centered Rear LRAD1716 LRADQ ** 16 3 / /8 1, 2, MR2, 3 or OS4 Centered /2 LRAD1720 LRADQ ** 16 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear LRAD1722 LRADQ /2 16 ** 16 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear LRAD1918 LRADQ /2 ** 18 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear /2 LRAD1918L LRADQ1918L /2 ** 18 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Left /2 LRAD1918R LRADQ1918R /2 ** 18 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Right /2 LRAD1919 LRADQ / /2 ** 18 7 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear LRAD2022 LRADQ / ** 18 7 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear /2 LRAD2219 LRADQ / ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear LRAD2219L LRADQ2219L / ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Left LRAD2219R LRADQ2219R / ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Right LRAD2222 LRADQ ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear LRAD2521 LRADQ / /4 ** 24 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear LRAD2521L LRADQ2521L / /4 ** 24 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Left LRAD2521R LRADQ2521R / /4 ** 24 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Right LRAD3122 LRADQ ** 30 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear *Length is left to right. Width is front to back. **Available in 4", 4 1 /2", 5", 5 1 /2", 6" and 6 1 /2" depths. Please consult your sales representative for other depths or modifications. 4" 4" 1-3/4" R D B 1-3/4"R E THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS. THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE. C A ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Elkay Camden Court Oak Brook, IL This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers offerings, be certain these features are not overlooked. Printed in U.S.A Elkay (Rev. 12/09) 1-135G

83 Spec Seq#: 64 Lustertone Single Bowl Sink Models LRAD and LRADQ Series A.D.A. Compliant SPECIFICATIONS DRAIN OPENING LOCATIONS 5" 4-1/2" for LRAD(Q)1522 Off-Centered Rear Centered 5" 5" 5" 5" Off-Centered Left Off-Centered Right HOLE DRILLING CONFIGURATIONS 4" 4" 4" 1 4" 4 4" 4" 4" 2 OS4 4" 4" 4" 4" 4" MR2 5 4" 4" 3 Quick-Clip Mounting System U-Channel Type Mounting System Elkay 1-135G (Rev. 12/09) 2222 Camden Court Oak Brook, IL Printed in U.S.A Elkay

84 Spec Seq#: 65 LABORATORY FAUCET - SINGLE Z825B4-XL TAG Engineering Specifications: Zurn AquaSpec Z825B4-XL Polished chrome-plated single laboratory faucet with integral shank, a quarter turn ceramic disc cartridge and a 5-3/8" [137mm] centerline rigid or swing gooseneck spout. Unit is furnished with a 2.2 GPM [8.3 L] pressure compensating aerator (complying with ANSI A Standard for flow), a 4 [102mm] vandal-resistant color-coded metal wrist blade handle, mounting hardware and a 1/2" NPSM coupling nut for standard lavatory riser. Zurn Lead Compliant* XL products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn XL products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code ; Vermont 9 VCA 2470h Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -AR Anti-Rotation Pins -FC 2.0 GPM [7.6 L] Laminar Flow Control in Base of Spout -G 1-1/4" [32mm] Grid Strainer Drain -HCT Hot/Cold Text Indexes -PT 1-1/4" [32mm] Cast Brass P-Trap with a 7-1/2" [191mm] Long 17-Gauge Wall Bend -140 Restricted 140 j Swing Spout -2F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Aerator -3F 0.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Female Spray Outlet -4F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Laminar Flow Outlet -7F 1.0 GPM [3.8 L] Pressure Compensating Female Spray Outlet -16F 1.0 GPM [3.8 L] Vandal Resistant Pressure Compensating Female Spray Outlet -17F 1.5 GPM [5.7 L] Vandal Resistant Pressure Compensating Female Aerator -18F 1.5 GPM [5.7 L] Vandal Resistant Pressure Compensating Female Laminar Flow -19F 1.5 GPM [5.7 L] Anti-Microbial Pressure Compensating Female Laminar Flow Outlet -21F 1.0 GPM [3.8L] Female Laminar Flow Outlet -22F 1.0 GPM [3.8L] Vandal-Resistant Female Laminar Flow Outlet -23F 1.5 GPM [5.7L] Pressure Compensating Female Aerator ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2009 Zurn Industries, LLC Rev. Date: 11/24/09 C.N. No Dwg. No Product No. Z825B4-XL

85 Spec Seq#: 66 BASKET STRAINER Z8740-PC TO Z SS TAG Engineering Specification: Zurn Z8740-PC TO Z SS Heavy duty forged basket strainer with matching basket and 1 1/2[38] x 4[102] 20 gauge tailpiece with cast brass locknut and cast brass tailpiece nut. Note: All dimensions are for reference only. Do not use for pre-plumbing PRODUCT MATERIAL DIMENSIONS MASTER WEIGHT NUMBER C ØD CARTON CARTON Z8740-PC CHROME PLATED BRASS 2 1/8[54] 4 1/2[114] Z8741-SS STAINLESS STEEL (SS430) 2 3/4[70] 4 3/8[111] Z SS STAINLESS STEEL (SS430) W/ 17GA. TAILPIECE 2 3/4[70] 4 3/8[111] OPTIONAL ACCESSORIES Suffix Description -LTLBN Less Tailpiece, with zinc locknut and cast brass tailpiece nut ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2010 Zurn Industries, LLC Rev. D Date: 2/12/10 C.N. No Dwg. No Product No. Z8740-PC - Z SS

86 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 67 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

87 -- S-8 -- Spec Seq#: 68

88 Spec Seq#: 69 SPECIFICATIONS Lustertone Single Bowl Sink Models LRAD and LRADQ Series A.D.A. Compliant GENERAL Highest quality sink seamlessly formed of #18 gauge, type 304 (18-8) nickel bearing stainless steel. Self-rimming. DESIGN FEATURES LRAD(Q) Bowl Depth: 4", 4-1/2", 5", 5-1/2", 6" or 6-1/2". Coved Corners: 1-3/4" vertical and horizontal radius. Bowl and Faucet Deck Recess: 3/16" below outside edge of sink. Finish: Exposed surfaces are hand blended to a lustrous highlighted satin finish. Underside: Fully undercoated to dampen sound and prevent condensation. OTHER Drain Opening: 3-1/2" (see back for locations). NOTE: Unless otherwise specified, models with one, two, three or OS4 faucet hole option are furnished with 3 faucet holes as shown; models with choice of one, two, three, four or five faucet hole option are furnished with 4 faucet holes standard. SINK DIMENSIONS (INCHES)* Model LRAD(Q) Cutout in Countertop Overall Inside Bowl No. of 3 1 /2" U-Channel Quick-Clip (1 1 /2" Radius 1 1 /2" Dia. Drain Opening Minimum Ship. Model Model L W L W D Corners) Faucet Holes (see back Cabinet Wt. Number Number A B C D E L W 4" Center for details) Size Lbs. LRAD1316 LRADQ ** 12 3 / /8 1, 2, MR2 or 3 Centered /2 LRAD1517 LRADQ / ** 14 3 / /8 1, 2, MR2 or 3 Centered /4 LRAD1522 LRADQ /2 16 ** 14 3 / /8 1, 2, MR2 or 3 Off-Centered Rear LRAD1716 LRADQ ** 16 3 / /8 1, 2, MR2, 3 or OS4 Centered /2 LRAD1720 LRADQ ** 16 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear LRAD1722 LRADQ /2 16 ** 16 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear LRAD1918 LRADQ /2 ** 18 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear /2 LRAD1918L LRADQ1918L /2 ** 18 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Left /2 LRAD1918R LRADQ1918R /2 ** 18 3 / /8 1, 2, MR2, 3 or OS4 Off-Centered Right /2 LRAD1919 LRADQ / /2 ** 18 7 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear LRAD2022 LRADQ / ** 18 7 / /8 1, 2, MR2, 3 or OS4 Off-Centered Rear /2 LRAD2219 LRADQ / ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear LRAD2219L LRADQ2219L / ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Left LRAD2219R LRADQ2219R / ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Right LRAD2222 LRADQ ** 21 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear LRAD2521 LRADQ / /4 ** 24 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear LRAD2521L LRADQ2521L / /4 ** 24 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Left LRAD2521R LRADQ2521R / /4 ** 24 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Right LRAD3122 LRADQ ** 30 3 / /8 1, 2, MR2, 3, 4 or 5 Off-Centered Rear *Length is left to right. Width is front to back. **Available in 4", 4 1 /2", 5", 5 1 /2", 6" and 6 1 /2" depths. Please consult your sales representative for other depths or modifications. 4" 4" 1-3/4" R D B 1-3/4"R E THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS. THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE. C A ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Elkay Camden Court Oak Brook, IL This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers offerings, be certain these features are not overlooked. Printed in U.S.A Elkay (Rev. 12/09) 1-135G

89 Spec Seq#: 69 Lustertone Single Bowl Sink Models LRAD and LRADQ Series A.D.A. Compliant SPECIFICATIONS DRAIN OPENING LOCATIONS 5" 4-1/2" for LRAD(Q)1522 Off-Centered Rear Centered 5" 5" 5" 5" Off-Centered Left Off-Centered Right HOLE DRILLING CONFIGURATIONS 4" 4" 4" 1 4" 4 4" 4" 4" 2 OS4 4" 4" 4" 4" 4" MR2 5 4" 4" 3 Quick-Clip Mounting System U-Channel Type Mounting System Elkay 1-135G (Rev. 12/09) 2222 Camden Court Oak Brook, IL Printed in U.S.A Elkay

90 Spec Seq#: 70 LABORATORY FAUCET - SINGLE Z825B4-XL TAG Engineering Specifications: Zurn AquaSpec Z825B4-XL Polished chrome-plated single laboratory faucet with integral shank, a quarter turn ceramic disc cartridge and a 5-3/8" [137mm] centerline rigid or swing gooseneck spout. Unit is furnished with a 2.2 GPM [8.3 L] pressure compensating aerator (complying with ANSI A Standard for flow), a 4 [102mm] vandal-resistant color-coded metal wrist blade handle, mounting hardware and a 1/2" NPSM coupling nut for standard lavatory riser. Zurn Lead Compliant* XL products are a line of durable, high quality brass faucets and fixtures that are designed and manufactured to comply with state laws and local codes that mandate lead content levels. Zurn XL products are manufactured with *not more than 0.25% lead content when used with respect to wetted surfaces of pipes and pipe fittings, plumbing fitting and fixtures: California Health & Safety Code ; Vermont 9 VCA 2470h Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -AR Anti-Rotation Pins -FC 2.0 GPM [7.6 L] Laminar Flow Control in Base of Spout -G 1-1/4" [32mm] Grid Strainer Drain -HCT Hot/Cold Text Indexes -PT 1-1/4" [32mm] Cast Brass P-Trap with a 7-1/2" [191mm] Long 17-Gauge Wall Bend -140 Restricted 140 j Swing Spout -2F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Aerator -3F 0.5 GPM [1.9 L] Vandal-Resistant Pressure Compensating Female Spray Outlet -4F 2.2 GPM [8.3 L] Vandal-Resistant Pressure Compensating Female Laminar Flow Outlet -7F 1.0 GPM [3.8 L] Pressure Compensating Female Spray Outlet -16F 1.0 GPM [3.8 L] Vandal Resistant Pressure Compensating Female Spray Outlet -17F 1.5 GPM [5.7 L] Vandal Resistant Pressure Compensating Female Aerator -18F 1.5 GPM [5.7 L] Vandal Resistant Pressure Compensating Female Laminar Flow -19F 1.5 GPM [5.7 L] Anti-Microbial Pressure Compensating Female Laminar Flow Outlet -21F 1.0 GPM [3.8L] Female Laminar Flow Outlet -22F 1.0 GPM [3.8L] Vandal-Resistant Female Laminar Flow Outlet -23F 1.5 GPM [5.7L] Pressure Compensating Female Aerator ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2009 Zurn Industries, LLC Rev. Date: 11/24/09 C.N. No Dwg. No Product No. Z825B4-XL

91 Spec Seq#: 71 BASKET STRAINER Z8740-PC TO Z SS TAG Engineering Specification: Zurn Z8740-PC TO Z SS Heavy duty forged basket strainer with matching basket and 1 1/2[38] x 4[102] 20 gauge tailpiece with cast brass locknut and cast brass tailpiece nut. Note: All dimensions are for reference only. Do not use for pre-plumbing PRODUCT MATERIAL DIMENSIONS MASTER WEIGHT NUMBER C ØD CARTON CARTON Z8740-PC CHROME PLATED BRASS 2 1/8[54] 4 1/2[114] Z8741-SS STAINLESS STEEL (SS430) 2 3/4[70] 4 3/8[111] Z SS STAINLESS STEEL (SS430) W/ 17GA. TAILPIECE 2 3/4[70] 4 3/8[111] OPTIONAL ACCESSORIES Suffix Description -LTLBN Less Tailpiece, with zinc locknut and cast brass tailpiece nut ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2010 Zurn Industries, LLC Rev. D Date: 2/12/10 C.N. No Dwg. No Product No. Z8740-PC - Z SS

92 BRASS TRAP PRODUCT SPECIFICATIONS Spec Seq#: 72 Job Name: Job Location: For Commercial & Residential Applications Contractor: Approval: Tube S-Trap Tube P-Trap with clean out Tube P-Trap less clean out Sink P-Trap Semi-Cast P-Trap with clean out ML10372 ML10362 ML10356,ML10355,ML10357, ML10358, ML10359,ML10360, ML10361,ML10366, ML10367, ML10368, ML10369, ML10370, ML10371 ML10373, ML10374, ML10375 ML10364, ML10365 To Dimensions (inches) Submit Part No. Description A B C D E F ML /2" 20GA Tube P-TrapCP ML /2" 22GA Tube P-Trap CP ML /2" 20GA Tube P-Trap w/deep Flange CP ML /2" 17GA Tube P-Trap CP ML /2" 17GA Tube P-Trap w/deep Flange CP ML /2" 17GA G/J Tube P-Trap BR/Nut CP ML /2" 17GA G/J Tube P-Trap BR/Nut RB ML /2" 17GA Tube P-Trap w/cleanout CP ML /2" 17GA Semi Cast P-Trap BR/Nut w/cleanout CP ML /4" 17GA Semi Cast P-Trap w/cleanout CP ML /4" 22GA Tube P-Trap CP ML /4" 22GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube P-Trap CP ML /4" 20GA Tube P-Trap w/deep Flange CP ML /4" 17GA Tube P-Trap CP ML /4" 17GA Tube P-Trap w/deep Flange CP ML /4" 20GA Tube S-Trap w/deep Flange CP ML /2" 22GA Sink P-Trap CP ML /2" 17GA G/J Sink P-Trap BR/Nut CP ML /2" 17GA G/J Sink P-Trap BR/Nut RB Warranty See warranty information for more details MAINLINE reserves the right to make product and material changes at any time without notice. Mainline Brass Trap Spec rev

93 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 73 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

94 -- SH-1 -- Spec Seq#: 74

95 Spec Seq#: 75 Specifications Materials All exposed materials are stainless steel or chrome-plated brass. Valve bodies are cast brass. Standard Equipment In-Wall Shower Valve as Selected For more detailed information refer to tech data for specific valve. Supply Inlets Female supply inlets are 1/2". Optional Equipment Showerhead 1/2" NPT Institutional or deluxe type chrome-plated showerhead with bent arm and flange or wall arm. Flow Control A 2.0 GPM (7.6 LPM) flow control is standard. Actual flow may vary but will not exceed 2.5 GPM (9.5 LPM) max.. Tub Spout Diverter type spout with 1/2" inlet. Model 1C Optional Selections Valves (select one): Hot/tempered and cold supplies EF Equa Flo Pressure Balancing Valve EFT1 Equa Flo Pressure Balancing Valve with Temperature Display C5 Equa-Flo C5 Pressure-Balancing Valve HD HDT1 Equa Flo HD Pressure Balancing HDT1 Equa Flo HD Pressure Balancing Valve with Temperature Display TMV TMVT1 Thermostatic Mixing Valve TMVT1 Thermostatic Mixing Valve with Temperature Display HC Hot and Cold Compression Valve Single tempered/cold supply AZ* Infrared Metering Valve AST Air Metering Valve PM Presto 50B Metering Valve SV Single Compression Valve SVL Single Compression Valve with Lever Handle TT* TouchTime Metering Valve 1 minute TT3* TouchTime Metering Valve 3 minutes Showerhead (select one): Bent Arm and Flange S1 Standard Institutional Showerhead D1 Deluxe Showerhead w/ Ball Joint B1 Brass Showerhead w/ Ball Joint E1 Economy Soft Flow Showerhead J1 Multi-Jet Chrome-Plated Brass Showerhead Wall Arm S Standard Institutional Showerhead SF Deluxe Showerhead w/ Ball Joint BS Brass Showerhead w/ Ball Joint ES Economy Soft Flow Showerhead SX Severe Service Showerhead Plumbing Fixtures Document No Description Built-In Showers with Concealed Supplies * AZ, TT, and TT3 valves require optional 24V Class 2 transformers, available as a separate item from Bradley Page 1 of 1 This information is subject to change without notice. 5/9/2012 1C Built-in Showers with Concealed Supplies Hand-Held Shower Spray Constructed with a 60" stainless steel flexible hose and post style mounting bracket for wall mount or slide bar. Elevated in-line back flow preventer with or without quick disconnect for flexible hose. Diverter Valve Lever handle operation for easy transfer of water flow between fixed and hand held spray. Showerhead Options (select one): (not available with SX, E1, J1, B1, BS or ES) AKV Allen Key Volume Control LBJ Lockable Ball Joint THV T-Handle Volume Control Hand Shower Variations (select one): B24 With 60" Flexible Hose, 24" Metal Slide Bar and Vacuum Breaker E24 With 60" Flexible Hose, 22" Economy Slide Bar and Vacuum Breaker SB With 60" Flexible Hose, 24" Metal Slide Bar, Vacuum Breaker and Quick Disconnect HW With 60" Flexible Hose, Wall Hooks and Vacuum Breaker HS With 60" Flexible Hose, Wall Hooks, Vacuum Breaker and Quick Disconnect A24 With 60" flexible hose, 24" ADA Grab Bar and Vacuum Breaker A36 With 60" flexible hose, 36" ADA Grab Bar and Vacuum Breaker Optional Flow Control: (not available with D1, B1, J1, SF or BS) G 1.5 GPM (5.7 LPM) Flow Control (showerhead and hand shower) Diverter Valve: DV In-Wall Diverter Valve Tub Spout (select one): TS Tub Spout threaded DJ Tub Spout slip joint Supply Stops (select one): (included with EF, HD and TMV valves) ST Stops in Supply for Valves Miscellaneous (select one): AP Anchor Plate for Showerhead SD Wall Mounted Soap Dish BP Back Plate for Showerhead RSD Recessed Soap Dish 2012 Bradley P.O. Box 309, Menomonee Falls, WI Phone: 800.BRADLEY( ) Fax: bradleycorp.com

96 -- EWC-1 -- Spec Seq#: 76

97 Spec Seq#: 77 SP E C I FI C AT I ON S GENERAL Self-contained, double wall hung electric refrigerated, water cooler. Vandal-resistant unit for use in high demand locations where vandalism may occur. Rated for indoor or outdoor use. Stainless steel construction provides vandal-resistant enclosure. Optional perforated stainless steel louver screening prevents objects from being inserted into cooler. Flow regulator provides constant stream from 20 to 105 psi water pressure. Heavy duty push button control is vandal-resistant. ADA COMPLIANT These Water Coolers comply with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children s environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes. NO LEAD DESIGN These Water Coolers are certified to be lead-free as defined by the Safe Drinking Water Act. Elkay Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler. CAPACITIES CHART **GPH of 50 F Drinking Water Room Temperature F Full Glass Ship. Wt. Model Volt./ Base 70 F 80 F 90 F Rated Load Filler Filter Louver Lbs. Number Hertz Rate (21 C) (27 C) (32 C) Watts Amps Option Option Screens (Kg.) VRCTL8SC 120V/ 60Hz No Yes Yes VRCTL8S2JOC 240V/ No Yes Yes 94 50Hz 220- VRCTL8S3JOC 240V/ No Yes Yes 94 60Hz VRCTLDDSC No Yes Yes 56 **Based on 80 F (27 C) inlet water temperature. Rated watts shown are based on operational (run) time, in accordance with A.R.I. Standard 1010 conditions. Specific applications will determine the actual watts consumed per hour. Watts consumed will be based on number of people served per hour (usage), ambient temperatures, and inlet water temperature. COOLING SYSTEM Motor Compressor: Hermetically sealed, reciprocating type, 120 Volt/60 Hz, single phase or Volt/50 Hz or 60 Hz, two phase. Sealed-in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug. Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated. Cooling Unit: Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self extinguishing material. Refrigeration Control: Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively troublefree operation. Two Station Wall Mount Water Cooler Vandal-Resistant, Barrier-Free Access Model VRCTL8SC Model VRCTL8SC Temperature Control: Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements. Easily accessible. CONSTRUCTION Frame: alvanized structural steel chassis supports fountain top and cabinet panels. Cololer Top: Series 300 one piece stainless steel top, polished to a uniform Elkay bright luster finish. Basin has embossed bubbler pad. Vandal-resistant bubbler: Heavy duty, one piece construction. Keyed into position to prevent rotation. Meets UL requirements and all sanitary codes. Cabinet: Cabinet design allows for flush to wall mounting. No recess space is required. Includes bottom cover plate fastened with vandal-resistant screws. Color Selection: Stainless steel furnished as standard. ALSO AVAILABLE Model VRCTLFR8SC Same as model above, which includes frost resistant heating element. Tested to 32 F (0 C) with no wind. Specify for areas where the temperature will occasionally drop to freezing for a short period of time. (Glass filler not available). Model VRCTLFRDDSC also available. Model VRCTLSC8SC Same as VRCTL8S with perforated stainless steel louvers screening prevents objects from being inserted into coolers. VRCTLSCDDSC also available. Protected by Elkay s 5 Year Limited Warranty on the refrigeration system of the unit. Elkay Pressure-Type Water Coolers are designed to operate on 20 psi (138 KPa) to 105 psi (724 KPa) supply line pressure. If inlet pressure is above 105 psi (724 KPa), a pressure regulator must be installed in the supply line. Any damage caused by reason of connecting this product to supply line pressures lower than 20 psi (138 KPa) or higher than 105 psi (724 KPa) is not covered by the warranty. STANDARDS Elkay Electric Air Cooled Water Coolers are listed by Underwriters Laboratories Inc. and comply with both Canadian and U.S. requirements. These units comply with A.R.I. Standard This cooler is certified by WQA to lead-free compliance including NSF/ANSI 61 and 372. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkayusa.com for most current version. Elkay elkayusa.com 2222 Camden Court Oak Brook, IL This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers offerings, be certain these features are not overlooked. Printed in U.S.A Elkay (Rev. 1/13)

98 RELEASE TUBE PULLIN PUSHIN A B C TACH TO IN TO TUBE RELEASE A TUBE POSITION COLLET IN PUSH SECURED IS TUBE IN SIMPLY TINGS OPERATIONOFQUICKCONECTFI LEGEND A=RECOMENDEDWATERSUPLYLOCATION.SHUTOFVALVE(NOTFURNISHED)TOACEPT3/8"O.D.UNPLATEDCOPERTUBE. 3 (76m)MAXIMUMOUTFROMWAL. B=RECOMENDEDLOCATIONFORWASTEOUTLET1-1/2"O.D.DRAIN. C=1-1/2"TRAPNOTFURNISHED D=ELECTRICALSUPLY(3)WIRERECESEDBOX. E=INSUREPROPERVENTILATIONBYMAINTAINING6"(152m)(MIN.)CLEARANCEFROMCABINETLOUVERSTOWAL. F=7/16"BOLTHOLESFORFASTENINGUNI TOWAL. *ADA REQUIREMENT FINISHED REDUCE HEIGHT BY 3" FOR INSTALLATION OF CHILDRENS ADA COOLER FLOOR 10" (254mm) (351mm) (518mm) (313mm) 12-5/16" (127mm) 6-3/4" 20-1/8" 4-1/2" 5" (511mm) (127mm) 20-3/8" (114mm) 13-7/8" (476mm) 25-1/8" (638mm) 27" *(686mm) 5" (62mm) 3-1/2" (89mm) (173mm) B18-3/4" 2-7/16" HEIGHT ORIFICE C 32-15/16" 37-1/2" (837mm) 4-3/4" (121mm) (38mm) (952mm) FD 1-1/2" HEIGHT (810mm) FE (203mm) RIM CL 31-7/8" HEIGHT ORIFICE (1003mm) CL 6-1/2" 39-1/2" EA (166mm) (35mm) (67mm) HOLES) (146mm) (146mm) 2-5/8" 5-3/4" 5-3/4" 1-3/8" (10 5/16" (146mm) (8mm) (35mm) 1-3/8" (459mm) (146mm) 5-3/4" 18-1/16" (473mm) 5-3/4" 18-5/8" HANGE Spec Seq#: 77 Two Station Wall Mount Water Cooler Vandal-Resistant, Barrier-Free Access Model VRCTL8SC 1/4" O.D. TUBE WATER INLET TO COOLER OPERATION OF QUICK CONNECT FITTINGS SIMPLY PUSH IN TUBE TO ATTACH 3/8" O.D. TUBE CONNECT COLD WATER SUPPLY NOTE: WATERFLOW DIRECTION TUBE IS SECURED IN POSITION BUILDING WATER INLET SERVICE STOP (NOT FURNISHED) PUSH IN COLLET TO RELEASE TUBE A B C PUSHING TUBE IN BEFORE PULLING IT OUT HELPS TO RELEASE TUBE ROUGH-IN DIMENSIONS INSTALLER PLEASE NOTE: IMPORTANT THIS WATER COOLER HAS BEEN DESIGNED AND BUILT TO PROVIDE WATER TO THE USER WHICH HAS NOT BEEN ALTERED BY MATERIALS IN THE COOLER WATERWAYS. THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING BUT MAY ALSO OCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A WATER COOLER CREATING AN ELECTROLYSIS WHICH CREATES A METALLIC TASTE OR CAUSES AN INCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS AVOIDABLE BY INSTALLING THE COOLER USING THE PROPER MATERIALS AS SHOWN BELOW. NOTICE THIS WATER COOLER MUST BE CONNECTED TO THE WATER SUPPLY USING A DIELECTRIC COUPLING. THE COOLER IS FURNISHED WITH A NON-METALLIC STRAINER WHICH MEETS THIS REQUIREMENT. THE DRAIN TRAP WHICH IS PROVIDED BY THE INSTALLER SHOULD ALSO BE PLASTIC TO COMPLETELY ISOLATE THE COOLER FROM THE BUILDING PLUMBING SYSTEM. MINIMUM 40 PSI SUPPLY LINE PRESSURE REQUIRED IN SPECIAL CIRCUMSTANCES WHEN BOTH SIDES OF BILEVEL ARE IN USE SIMULTANEOUSLY TO ENSURE ADEQUATE STREAM HEIGHT. DOES NOT APPLY TO NON-REFRIGERATED UNITS. 5/16" (8mm) (10 HOLES) 37-1/2" (952mm) 6-1/2" (166mm) E F 20-3/8" (518mm) 5-3/4" (146mm) 1-3/8" 1-3/8" (35mm) (35mm) 5" (127mm) C L FINISHED FLOOR 1-1/2" (38mm) 2-7/16" (62mm) 10" (254mm) 18-1/16" (459mm) 5-3/4" (146mm) 5-3/4" (146mm) 1-3/8" 1-3/8" (35mm) (35mm) 5" (127mm) C L 3-1/2" (89mm) 4-1/2" (114mm) 5-3/4" (146mm) B D E A F 18-3/4" 25-1/8" (476mm) (638mm) 13-7/8" (351mm) 20-1/8" (511mm) HANGER BRACKET 39-1/2" (1003mm) ORIFICE HEIGHT 32-15/16" (837mm) ORIFICE HEIGHT 2-5/8" (67mm) 31-7/8" (810mm) RIM HEIGHT REDUCE HEIGHT BY 3" FOR INSTALLATION OF CHILDRENS ADA COOLER * 27" (686mm) 8" (203mm) C 4-3/4" (121mm) 18-5/8" (473mm) 12-5/16" (313mm) 6-3/4" (173mm) LEGEND A = RECOMMENDED WATER SUPPLY LOCATION. SHUT OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8" O.D. UNPLATED COPPER TUBE. 3 (76mm) MAXIMUM OUT FROM WALL. B = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/2" O.D. DRAIN. C = 1-1/2" TRAP NOT FURNISHED D = ELECTRICAL SUPPLY (3) WIRE RECESSED BOX. E = INSURE PROPER VENTILATION BY MAINTAINING 6" (152mm) (MIN.) CLEARANCE FROM CABINET LOUVERS TO WALL. F = 7/16" BOLT HOLES FOR FASTENING UNIT TO WALL. * ADA REQUIREMENT Elkay (Rev. 1/13) 2222 Camden Court Oak Brook, IL elkayusa.com Printed in U.S.A Elkay

99 Spec Seq#: 78 PLASTIC TUBULAR PRODUCT GUIDE 2 0F 8 Traps Tube P-Trap 1-1/2" Poly Washers Includes 1-1/2" x 1-1/4" Reducing Washer To Submit Part No. Description Packaging MLP /2" PVC Tube P-Trap With Adapter Box MLA /2" ABS Tube P-Trap With Adapter Box MLP9703BG 1-1/2" PVC Tube P-Trap With Adapter Bag MLA9703BG 1-1/2" ABS Tube P-Trap With Adapter Bag MLP9703WBG 1-1/2" PVC Tube P-Trap With True Blue Washer & Adapter Bag MLA9703WBG 1-1/2" ABS Tube P-Trap With True Blue Washer & Adapter Bag MLP9702B 1-1/2" PVC P-Trap W/Solvent Weld Adapter Bag Tube P-Trap 1-1/4" Poly Washers To Submit Part No. Description Packaging MLP /4" PVC Tube P-Trap Less Adapter Box MLP9701BG 1-1/4" PVC Tube P-Trap Less Adapter Bag MLP9701DFB 1-1/4" PVC Tube P-Trap With Adapter & Deep Flange Bag MLP /4" PVC Tube P-Trap With 1-1/2" Wall Arm Less Adapter Box MLP9700BG 1-1/4" PVC Tube P-Trap With 1-1/2" Wall Arm Less Adapter Bag Tube P-Trap with Econo Nuts 1-1/2" Poly Washers Includes 1-1/2" x 1-1/4" Reducing Washer To Submit Part No. Description Packaging MLP9704AB 1-1/2" PVC P-Trap Econo Nuts With ABS Adapter Bag All dimensions listed are nominal. MAINLINE reserves the right to make product and material changes at any time without notice. Contact your sales representative for more information or visit our website at mainlinecollection.com Mainline Plastic Tubular Product Guide rev

100 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 79 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

101 -- DF-1 -- Spec Seq#: 80

102 Spec Seq#: 81 SPECIFICATIONS GENERAL Self-contained, wall hung electric refrigerated, water cooler. Vandal-resistant unit for use in high demand locations where vandalism may occur. Rated for indoor or outdoor use. Stainless steel construction provides vandal-resistant enclosure. Optional perforated stainless steel louver screening prevents objects from being inserted into cooler. Flow regulator provides constant stream from 20 to 105 psi water pressure. Heavy duty push button control is vandal-resistant. Non-pressurized cooling tank is standard. Non-pressurized water tank is located after bubbler valve, so that tank is subject to line pressure only when push button is pressed. ADA COMPLIANT These Water Coolers comply with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children s environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes. NO LEAD DESIGN These Water Coolers are certified to be lead-free as defined by the Safe Drinking Water Act. Elkay Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler. CAPACITIES CHART **GPH of 50 F Drinking Water Room Temperature F Full Glass Ship. Wt. Model Volt./ Base 70 F 80 F 90 F Rated Load Filler Filter Louver Lbs. Number Hertz Rate (21 C) (27 C) (32 C) Watts Amps Option Option Screens (Kg.) VRC8S 120V/ 60Hz No Yes Yes VRC8S2JO 240V/ No Yes Yes 66 50Hz 220- VRC8S3JO 240V/ No Yes Yes 66 60Hz VRCDS No Yes Yes 32 **Based on 80 F (27 C) inlet water temperature. Rated watts shown are based on operational (run) time, in accordance with A.R.I. Standard 1010 conditions. Specific applications will determine the actual watts consumed per hour. Watts consumed will be based on number of people served per hour (usage), ambient temperatures, and inlet water temperature. COOLING SYSTEM Motor Compressor: Hermetically sealed, reciprocating type, 120 Volt/60 Hz, single phase or Volt/50 Hz or 60 Hz, two phase. Sealed-in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug. Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated. Cooling Unit: Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self extinguishing material. Refrigerant Control: Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free operation. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkayusa.com for most current version of Elkay product specification sheets. Wall Mount Water Cooler Vandal-Resistant, Barrier-Free Access Model VRC8S Model VRC8S Temperature Control: Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements. Easily accessible. CONSTRUCTION Frame: Galvanized structural steel chassis supports fountain top and cabinet panels. Fountain Top: Series 300 one piece stainless steel top, polished to a uniform Elkay bright luster finish. Basin has embossed bubbler pad. Vandal-Resistant Bubbler: Heavy duty, one piece construction. Keyed into position to prevent rotation. Meets UL requirements and all sanitary codes. Cabinet: Cabinet design allows for flush to wall mounting. No recess space is required. Includes bottom cover plate fastened with vandal-resistant screws. Color Selection: Stainless steel furnished as standard. ALSO AVAILABLE MODEL VRCFR8S: Same as model above, which includes frost resistant heating element. Tested to 32 F (0 C) with no wind. Specify for areas where the temperature will occasionally drop to freezing for a short period of time. (No glass filler with this option.) MODEL VRCSC8S: Same as VRC8S with perforated stainless steel louvers screening prevents objects from being inserted into coolers. Protected by Elkay s 5 Year Limited Warranty on the refrigeration system of the unit. Elkay Pressure-Type Water Coolers are designed to operate on 20 psi (138 KPa) to 105 psi (724 KPa) supply line pressure. If inlet pressure is above 105 psi (724 KPa), a pressure regulator must be installed in the supply line. Any damage caused by reason of connecting this product to supply line pressures lower than 20 psi (138 KPa) or higher than 105 psi (724 KPa) is not covered by the warranty. STANDARDS Elkay Electric Air Cooled Water Coolers are listed by Underwriters Laboratories Inc. and comply with both Canadian and U.S. requirements. These units comply with A.R.I. Standard This cooler is certified by WQA to lead-free compliance including NSF/ANSI 61-ANNEX G, AB This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers offerings, be certain these features are not overlooked. Elkay 2222 Camden Court elkayusa.com Oak Brook, IL Printed in U.S.A Elkay (Rev. 4/11) 12-46B

103 *ADA REQUIREMENT F = 7/16" BOLT HOLES FOR FASTENING UNIT TO WALL. E = INSURE PROPER VENTILATION BY MAINTAINING 6" (152mm) (MIN.) CLEARANCE FROM CABINET LOUVERS TO WALL. D = ELECTRICAL SUPPLY (3) WIRE RECESSED BOX. 1-1/4" TRAP NOT FURNISHED C = B DRAIN. O.D. 1-1/4" OUTLET WASTE FOR LOCATION RECOMMENDED = 3 WALL. FROM OUT MAXIMUM (76mm) A TUBE. COPPER UNPLATED O.D. 3/8 ACCEPT TO FURNISHED) (NOT VALVE OFF SHUT LOCATION. SUPPLY WATER RECOMMENDED = LEGEND C (786mm) 30-15/16" (635mm) 25" (543mm) 21-3/8" (467mm) 18-3/8" F A D E (127mm) (254mm) 5" 10" (114mm) 4-1/2" L C MODELS ONLY FILTER SHOWN FOR FILTER (8mm) DIA. (5 HOLES) 5/16" (146mm) 5-3/4" (89mm) 3-1/2" B (35mm) (35mm) 1-3/8" 1-3/8" (62mm) 2-1/2" (146mm) 5-3/4" (184mm) 7-1/4" (18mm) E 11/16" (352mm) 13-7/8" (65mm) 2-9/16" (116mm) 4-9/16" RIM HEIGHT (810mm) 31-7/8" HEIGHT ORIFICE (837mm) 32-15/16" (67mm) 2-5/8" (313mm) 12-5/16" (686mm) 27"* (159mm) 6-1/4" (203mm) 8" (473mm) 18-5/8" (38mm) 1-1/2" FINISHED FLOOR BRACKET HANGER RELEASE TUBE PULLING IT OUT HELPS TO PUSHING TUBE IN BEFORE A B C POSITION TUBE TO ATTACH TO RELEASE TUBE IN COLLET IN PUSH SECURED IS TUBE IN PUSH SIMPLY FITTINGS CONNECT QUICK OF OPERATION Spec Seq#: 81 Wall Mount Water Cooler Vandal-Resistant, Barrier-Free Access Model VRC8S 1/4" O.D. TUBE WATER INLET TO COOLER 3/8" O.D. TUBE CONNECT COLD WATER SUPPLY NOTE: WATERFLOW DIRECTION BUILDING WATER INLET SERVICE STOP (NOT FURNISHED) OPERATION OF QUICK CONNECT FITTINGS SIMPLY PUSH IN TUBE TO ATTACH TUBE IS SECURED IN POSITION PUSH IN COLLET TO RELEASE TUBE ROUGH-IN DIMENSIONS Open space rough-in design permits new installation or replacement of existing fountains and coolers with this Elkay cooler when rough-in is within the outline shown. IMPORTANT! INSTALLER PLEASE NOTE: This water cooler has been designed and built to provide water to the user which has not been altered by materials in the cooler waterways. The grounding of electrical equipment such as telephone, computers, etc., to water lines is a common procedure. This grounding may be in the building but may also occur away from the building. This grounding can cause electrical feedback into a water cooler creating an electrolysis which creates a metallic taste or causes an increase in the metal content of the water. This condition is avoidable by installing the cooler using the proper materials as shown below. NOTICE This water cooler must be connected to the water supply using a dielectric coupling. The cooler is furnished with a non-metallic strainer which meets this requirement. The drain trap which is provided by the installer should also be plastic to completely isolate the cooler from the building plumbing system. A B C PUSHING TUBE IN BEFORE PULLING IT OUT HELPS TO RELEASE TUBE 18-5/8" (473mm) 5/16" (8mm) DIA. (5 HOLES) 5-3/4" (146mm) 1-3/8" (35mm) 1-3/8" (35mm) B 5-3/4" (146mm) 2-5/8" (67mm) HANGER BRACKET 30-15/16" (786mm) FILTER SHOWN FOR FILTER MODELS ONLY 25" (635mm) E D A C L 11/16" (18mm) 7-1/4" (184mm) 2-1/2" (62mm) 4-9/16" (116mm) E 2-9/16" (65mm) 32-15/16" (837mm) ORIFICE HEIGHT 31-7/8" (810mm) RIM HEIGHT 8" (203mm) 6-1/4" (159mm) C 1-1/2" (38mm) 21-3/8" (543mm) F 18-3/8" (467mm) 5" (127mm) 3-1/2" (89mm) 4-1/2" (114mm) 10" (254mm) 13-7/8" (352mm) 27"* (686mm) 12-5/16" (313mm) FINISHED FLOOR LEGEND A = RECOMMENDED WATER SUPPLY LOCATION. SHUT OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8 O.D. UNPLATED COPPER TUBE. 3 (76mm) MAXIMUM OUT FROM WALL. B = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/4" O.D. DRAIN. C = 1-1/4" TRAP NOT FURNISHED D = ELECTRICAL SUPPLY (3) WIRE RECESSED BOX. E = INSURE PROPER VENTILATION BY MAINTAINING 6" (152mm) (MIN.) CLEARANCE FROM CABINET LOUVERS TO WALL. F = 7/16" BOLT HOLES FOR FASTENING UNIT TO WALL. *ADA REQUIREMENT Elkay 12-46B (Rev. 4/11) 2222 Camden Court Oak Brook, IL elkayusa.com Printed in U.S.A Elkay

104 Spec Seq#: 82 PLASTIC TUBULAR PRODUCT GUIDE 2 0F 8 Traps Tube P-Trap 1-1/2" Poly Washers Includes 1-1/2" x 1-1/4" Reducing Washer To Submit Part No. Description Packaging MLP /2" PVC Tube P-Trap With Adapter Box MLA /2" ABS Tube P-Trap With Adapter Box MLP9703BG 1-1/2" PVC Tube P-Trap With Adapter Bag MLA9703BG 1-1/2" ABS Tube P-Trap With Adapter Bag MLP9703WBG 1-1/2" PVC Tube P-Trap With True Blue Washer & Adapter Bag MLA9703WBG 1-1/2" ABS Tube P-Trap With True Blue Washer & Adapter Bag MLP9702B 1-1/2" PVC P-Trap W/Solvent Weld Adapter Bag Tube P-Trap 1-1/4" Poly Washers To Submit Part No. Description Packaging MLP /4" PVC Tube P-Trap Less Adapter Box MLP9701BG 1-1/4" PVC Tube P-Trap Less Adapter Bag MLP9701DFB 1-1/4" PVC Tube P-Trap With Adapter & Deep Flange Bag MLP /4" PVC Tube P-Trap With 1-1/2" Wall Arm Less Adapter Box MLP9700BG 1-1/4" PVC Tube P-Trap With 1-1/2" Wall Arm Less Adapter Bag Tube P-Trap with Econo Nuts 1-1/2" Poly Washers Includes 1-1/2" x 1-1/4" Reducing Washer To Submit Part No. Description Packaging MLP9704AB 1-1/2" PVC P-Trap Econo Nuts With ABS Adapter Bag All dimensions listed are nominal. MAINLINE reserves the right to make product and material changes at any time without notice. Contact your sales representative for more information or visit our website at mainlinecollection.com Mainline Plastic Tubular Product Guide rev

105 Features / Caractéristiques / Características Chrome Plated Loose Key for Vandal Resistance Easy Quarter Turn Operation Inlet 1/2 Nom. Comp. (5/8 O.D.) Outlet 3/8 O.D. Comp. Material: Machined One Piece Brass Body Lead Free (.25% Pb) Plaqué chrome Clé détachée pour protection antivandalisme Commande quart de tour facile Entrée dia. ext. 5/8 po Sortie dia. ext. 3/8 po à compression Matériau : Corps en laiton usiné d une seule pièce Sans plomb (.25% Pb) Spec Seq#: 83 MLQTSCR19CX Acabado en cromo Llave separada para control de vandalismo Funcionamiento fácil, cuarto de vuelta Entrada 5/8 diámetro exterior Salida diámetro exterior de 3/8, a compresión Material: cuerpo de bronce en una pieza Sin plomo (.25% Pb) Operating Specifications / Caractéristiques de fonctionnement / Especificaciones de funcionamiento Temperature: 40 to 140 Fahrenheit Pressure: 125 PSI Maximum Température : 40 F à 140 F Pression : 125 psi maximum Temperatura: de 40 a 140 Fahrenheit Presión: Máxima 125 PSI Compliance / Conformité / Cumplimiento de regulaciones Complies with Lead Free Plumbing Laws Conforme à la réglementation sur le matériel de plomberie sans plomb Cumple con las regulaciones sobre el plomo libre de material de fontanería Cross Reference Referencias adicionales Références SCR19 C SCR19X C KTSCR19 C KTSCR19X C Certifications / Certifications / Certificaciones CUPC CSA NSF61 9 NSF/ANSI 61

106 -- HB-1 -- Spec Seq#: 84

107 Spec Seq#: 85 The Model 24 and B24 are anti-siphon, vacuum breaker protected wall faucets designed for irrigation purposes in mild climate areas. The Model B24 is enclosed in a flush mounted wall box. Both models are designed to blend with modern architecture for installation on or in homes, service stations, churches, motels, drivein restaurants, etc. The Model Y24 is designed to be used on a stand pipe in the lawn and garden, etc. Anti-Siphon Wall Faucets Model 24/B24/Y24 SPECIFICATIONS: VACUUM BREAKER - ANTI-SIPHON: NIDEL Model 34HF with ¾ inch male hose thread ASSE Standard 1011 approved IAPMO listed Canadian Standards Association EPDM PACKING: Prevents leaking. PACKING NUT: Adjustable brass nut with deep stem guard. VALVE SEAT: Standard O size washer. HANDLES: Furnished with polycarbonate wheel handle and loose tee key. Optional: Metal wheel handle. INLETS: Model 24 as shown below. Model B24: 24P- ½ or 24P ¾ only. Model Y24: ¾ FPT. MAX PRESSURE: 125 p.s.i. MAX TEMPERATURE: 120 F SHIPPING WEIGHT: (per unit) MODEL 24 & Y24: 1 lb MODEL B24: 13 lbs (brass or chrome box) 6 lbs (aluminum box) Inlet Descriptions MODEL 24/B24 P-½ Inlet ½ FPT P-¾ Inlet ¾ FPT MODEL 24 Exterior Finish: Standard - Chrome (CH) Optional- Rough Brass (BR) or Polished Chrome (PC) MODEL B24 Exterior Finish: Standard - Chrome (CH) Optional- Rough Brass (BR) or Polished Brass (PB) Other Options: Anodized Aluminum Box (AL) MODEL 24 ONLY CP Inlet COMBINATION ½ COPPER TUBE ½ MPT MODEL 24 ONLY C Inlet COMBINATION ½ COPPER TUBE ¾ COPPER TUBE For Installation / Troubleshooting Instructions go to or call MODEL Y24 Exterior Finish: Standard - Chrome (CH) Optional- Rough Brass (BR) or Polished Chrome (PC) 2011 WOODFORD Mfg Rev. 5/11 Form No

108 Spec Seq#: 85 MODEL 24/B24/Y24 PARTS LIST ITEM PART# DESCRIPTION Washer Screw Washer Operating Stem Packing Support Washer EPDM Packing Packing Nut - Chrome Packing Nut - Brass Wheel Handle - Clear Wheel Handle - Tan Handle Screw - Nickel Handle Screw - Brass 9 34HF-CH 34HF Vacuum Breaker - Chrome 34HF-BR 34HF Vacuum Breaker - Brass Tee Key 11 B24BX Box/Door Assembly - Chrome B24BX-BR Box/Door Assembly - Brass B24BX-PB Box/Door Assembly - Polished Brass B24BX-AL Box/Door Assembly - Anodized Aluminum RK-24 Chrome Repair Kit (Includes items 1-8) RK-H34 Brass Repair Kit (Includes items 1-8) MODEL B24 Rough-In Dimensions END OF THREAD IN MODEL 24 Manufactured under one or more of the following patents: U.S. Patents: 3,414,001; 3,543,786; 4,178,956; 4,316,481; D216,790; D216,791; D277,365; D277,366; Canada Patents: 822,458; 852,529; 865,995 For more information contact... WOODFORD MANUFACTURING COMPANY 2121 Waynoka Road, Colorado Springs, Colorado Phone: (800) Fax: (800) To view our complete product line visit: or sales@woodfordmfg.com A Division Of WCM Industries, Inc.

109 -- HB-2 -- Spec Seq#: 86

110 Spec Seq#: 87 The Model 24 and B24 are anti-siphon, vacuum breaker protected wall faucets designed for irrigation purposes in mild climate areas. The Model B24 is enclosed in a flush mounted wall box. Both models are designed to blend with modern architecture for installation on or in homes, service stations, churches, motels, drivein restaurants, etc. The Model Y24 is designed to be used on a stand pipe in the lawn and garden, etc. Anti-Siphon Wall Faucets Model 24/B24/Y24 SPECIFICATIONS: VACUUM BREAKER - ANTI-SIPHON: NIDEL Model 34HF with ¾ inch male hose thread ASSE Standard 1011 approved IAPMO listed Canadian Standards Association EPDM PACKING: Prevents leaking. PACKING NUT: Adjustable brass nut with deep stem guard. VALVE SEAT: Standard O size washer. HANDLES: Furnished with polycarbonate wheel handle and loose tee key. Optional: Metal wheel handle. INLETS: Model 24 as shown below. Model B24: 24P- ½ or 24P ¾ only. Model Y24: ¾ FPT. MAX PRESSURE: 125 p.s.i. MAX TEMPERATURE: 120 F SHIPPING WEIGHT: (per unit) MODEL 24 & Y24: 1 lb MODEL B24: 13 lbs (brass or chrome box) 6 lbs (aluminum box) Inlet Descriptions MODEL 24/B24 P-½ Inlet ½ FPT P-¾ Inlet ¾ FPT MODEL 24 Exterior Finish: Standard - Chrome (CH) Optional- Rough Brass (BR) or Polished Chrome (PC) MODEL B24 Exterior Finish: Standard - Chrome (CH) Optional- Rough Brass (BR) or Polished Brass (PB) Other Options: Anodized Aluminum Box (AL) MODEL 24 ONLY CP Inlet COMBINATION ½ COPPER TUBE ½ MPT MODEL 24 ONLY C Inlet COMBINATION ½ COPPER TUBE ¾ COPPER TUBE For Installation / Troubleshooting Instructions go to or call MODEL Y24 Exterior Finish: Standard - Chrome (CH) Optional- Rough Brass (BR) or Polished Chrome (PC) 2011 WOODFORD Mfg Rev. 5/11 Form No

111 Spec Seq#: 87 MODEL 24/B24/Y24 PARTS LIST ITEM PART# DESCRIPTION Washer Screw Washer Operating Stem Packing Support Washer EPDM Packing Packing Nut - Chrome Packing Nut - Brass Wheel Handle - Clear Wheel Handle - Tan Handle Screw - Nickel Handle Screw - Brass 9 34HF-CH 34HF Vacuum Breaker - Chrome 34HF-BR 34HF Vacuum Breaker - Brass Tee Key 11 B24BX Box/Door Assembly - Chrome B24BX-BR Box/Door Assembly - Brass B24BX-PB Box/Door Assembly - Polished Brass B24BX-AL Box/Door Assembly - Anodized Aluminum RK-24 Chrome Repair Kit (Includes items 1-8) RK-H34 Brass Repair Kit (Includes items 1-8) MODEL B24 Rough-In Dimensions END OF THREAD IN MODEL 24 Manufactured under one or more of the following patents: U.S. Patents: 3,414,001; 3,543,786; 4,178,956; 4,316,481; D216,790; D216,791; D277,365; D277,366; Canada Patents: 822,458; 852,529; 865,995 For more information contact... WOODFORD MANUFACTURING COMPANY 2121 Waynoka Road, Colorado Springs, Colorado Phone: (800) Fax: (800) To view our complete product line visit: or sales@woodfordmfg.com A Division Of WCM Industries, Inc.

112 Spec Seq#: 88 Stem Locks Woodford Models SL-17, SL-24, SL-65 Stem Locks converts most Woodford wall faucets and wall hydrants into vandal resistant, tee key operated units. Simply remove the handle and packing nut and install the deep locking nut then snap on the cylinder lock. The faucet is now locked and secure. Use key to unlock and use the Tee Key to operate faucet. SL-17 Fits Woodford Models: 14, 16, 17, 19, 22, V22, 30 $45.70 List Price Each - Sold 1 per bag - Bag Contents: 1. Locking Nut 2. Cylinder Lock (Brown) 3. Key (2) 4. Tee Key SL-24 Fits Woodford Models: 24 & 26 $45.70 List Price Each - Sold 1 per bag - Bag Contents: 1. Locking Nut 2. Cylinder Lock (Silver) 3. Key (2) 4. Tee Key SL-65 Fits Woodford Models: 65 & 67 Series Bag Contents: 1. Head Nut 2. Locking Nut 3. Cylinder Lock (Silver) 4. Key (2) 5. Tee Key $54.80 List Price Each - Sold 1 per bag - For more information contact... WOODFORD MANUFACTURING COMPANY 2121 Waynoka Road, Colorado Springs, Colorado Phone: (800) Fax: (800) To view our complete product line visit: or sales@woodfordmfg.com 2012 WOODFORD Mfg. A Division Of WCM Industries, Inc. Rev. 08/12 Form No. SL.105

113 -- WH-1 -- Spec Seq#: 89

114 Spec Seq#: 90 FOR NON-FREEZING AREAS ONLY. The Model 76, B76, and RB76 are backflow protected wall hydrants designed for irrigation purposes in mild climate areas or within temperature controlled malls and plazas. SPECIFICATIONS: PATENTED HIGH FLOW DOUBLE CHECK BACKFLOW PREVENTER NIDEL Model 50HF with ¾ inch male hose thread ASSE Standard 1052 approved Field Testable Two Independent Check Valves Drains automatically when hose is removed No spray back FEATURES: Permanent type brass valve body with hemispherical seating surface. No Lead Solder on all solder joints. Hardened stainless steel stem resists damage. EPDM packing with adjustable packing nut Loose key operates hydrant. Three inlet options (See below) Max Pressure: 125 p.s.i. Max Temperature: 120 F Shipping Weight: Model lbs Model B lbs Model RB lbs For Installation / Troubleshooting Instructions go to or call R Inlet Descriptions P Inlet 3/4 Female Pipe Thread Close Coupled Wall Hydrants With Patented Model 50 High Flow Double Check Backflow Preventer Model 76/B76/RB76 Model 76 Exterior Finish: Standard - Chrome (CH) Optional - Brass (BR) Polished Brass (PB) Model B74 MODEL B76 Square Box & Door Exterior Finish: Standard - Chrome (CH) Optional - Brass (BR) Polished Brass (PB) C Inlet 3/4 Copper Sweat Fitting Patent Pending 1/2 1 5/16 EP Inlet Union Elbow with 3/4 Male Pipe Thread Specify as follows: Wall hydrant shall be Woodford Model 76 (exposed type), B76 or RB76 (concealed box type), with ASSE 1052 approved NIDEL Model 50HF backflow preventer. ¾ inlet and outlet (specify type of inlet). Hardened stainless steel operating stem. Packing nut secured with lock nut. Permanent type valve body with large hemispherical seating surface. Exterior finish to be Chrome Plated (options: Polished Brass or Rough Brass). Loose tee key to be furnished with each hydrant. MODEL RB76 Optional Round Box & Door Exterior Finish: Standard - Chrome (CH) Install through 6 diameter hole. When ordering, specify model number, inlet and finish WOODFORD Mfg Rev. 07/12 Form No

115 Spec Seq#: 90 Woodford Excellence Since 1929 Proudly Made In The U.S.A. Mounting Bracket Included With B76 Adjust and fasten bracket in stud wall. Attach box assembly to bracket for easy installation. May be ordered as separate item: RK-Bracket MODEL 76/B76/RB76 PARTS LIST ITEM PART# DESCRIPTION 1A Tee Key 1B Long Tee Key (Box Models) 2 5/8 3 1/ Packing Nut - chrome Packing Nut - brass Packing 1 3/4 1/2 1 1/16 5 1/ Head Nut Assembly - chrome Head Nut Assembly - brass Yoke Nut & Valve Assembly Model 76 Rough-In Dimensions 2 15/16 4 7/8 3 5/8 1 5/ HF-CH 50HF-BR NIDEL 50HF Backflow Preventer - chrome NIDEL 50HF Backflow Preventer - brass Truss Head Screws (4) 8 74BX Square Box/Door Assembly - chrome standard 9 RB74BX Round Box/Door Assembly - chrome RK-71 Chrome Repair Kit (Includes Items 1-5) Model RB76 Rough-In Dimensions Model B76 Rough-In Dimensions Manufactured under one or more of the following patents: U.S. Patents: 3,414,001; 4,178,956; 4,316,481; 4,532,954; 8,042,565 B2 D216,790; D216,791; D277,365; D277,366; Canada Patents: 852,529; 865,995; 1,146,438 For more information contact... WOODFORD MANUFACTURING COMPANY 2121 Waynoka Road, Colorado Springs, Colorado Phone: (800) Fax: (800) To view our complete product line visit: or sales@woodfordmfg.com A Division Of WCM Industries, Inc.

116 -- IMB-1 -- Spec Seq#: 91

117 SPECIFICATION SUBMITTAL SHEET Spec Seq#: 92 GALVANIZED ICE MAKER OUTLET BOX with Lead Free Domestic Valve Specifications: Furnish and install galvanized ice maker box. Unit shall be Guy Gray product code checked below as manufactured by IPS Corporation. Box Material: G90 Hot Dipped Galvanized Steel (unpainted) 20 gauge box with 20 gauge faceplate Valve & Drain Options: Lead free Domestic Valve with 1/2 MIP/Sweat, CPVC or PEX connection. Valves comply with ASME A Item # Product Description Model # Quantity Lead Free Domestic Valve - 1/2 Sweat Conx. BIM875AB Tamper resistant cover for Models B, BB, WB, FB, & BIM BTRC 6 BIM875D

118 -- WB-1 -- Spec Seq#: 93

119 Spec Seq#: 94 B200 Galvanized Center Drain SPECIFICATIONS Furnish and install recessed 20 Gauge Box and 20 gauge Faceplate Guy Gray washing machine outlet box. Washing Machine outlet box shall be furnished with 2 1/2" MIP/Sweat, Pex or CPVC connection valves and a 1 1/2" or 2" Threaded drain fitting and locknut. Unit shall be Guy Gray product code as manufactured by IPS Corporation in Collierville, TN. Complete product listing on reverse side of spec sheet

120 Spec Seq#: 94 B200 Series Specification Sheet Item # CENTER DRAIN GALVANIZED WASHING MACHINE OUTLET BOXES Model # /2" MIP/Sweat Conx. Valve - 1-1/2" Threaded Drain Fitting B /2" MIP/Sweat Conx. Valve - 2" Threaded Drain Fitting B Top Mount 1/2" MIP/Sweat Conx. Valves - 2" Threaded Drain Fitting BB200TS Domestic Valve w/ 1/2" Pex Conx-2" Threaded Drain B200X Domestic Valve w/ 1/2" CPVC Conx-2" Threaded Drain B200C IPS Corporation 500 Distribution Parkway Collierville, TN

121 -- MS-1 -- Spec Seq#: 95

122 Spec Seq#: 96 MOLDED STONE INTEGRAL DRAIN MOP SERVICE BASIN MOLDED STONE INTEGRAL DRAIN MOP SERVICE BASIN MSBID2424 MSBID2424 Molding done in matched metal dies under heat and pressure resulting in a one-piece homogeneous product Integral drain is molded into a one piece unit and designed to connect to a 3" (76mm) drain pipe with a QIC3XH gasket Stainless steel strainer included Nominal Dimensions: 24" x 24" x 10" (610 x 610 x 254mm) Shipping Weight: 27lbs. (12.3 Kg) Optional Components: QIC32 Quick Drain Connector for 2" pipe. Order separately. QIC3SN Quick Drain Connector for 3" cast iron soil pipe. Order separately 830AA Service Faucet: Chrome plated with vacuum breaker, integral stops, adjustable wall brace, pail hook and 3/4" hose thread on spout 832AA Hose & Hose Bracket 889CC Mop Hanger 833AA Silicone Sealant E77AA24 Vinyl Bumperguard MSG2424 Stainless Steel Wall Guard SEE REVERSE FOR ROUGHING-IN DIMENSIONS Compliance Certifications - Meets or Exceeds the Following Specifications: IAPMO / ANSI Z ASME A / CSA B125.2 CSA B45.5 Made in U.S.A. Customer Service Canada Fiat Products Customer Service United States Revised 6/10

123 Spec Seq#: 96 MOLDED STONE INTEGRAL DRAIN MOP SERVICE BASIN MSBID2424 SILICONE SEALANT SERVICE FAUCET WITH VACUUM BREAKER MOP HANGER SILICONE SEALANT CONCRETE BLOCK TOP VIEW CONCRETE BLOCK SILICONE SEALANT 3 30" (762mm) HOSE BASIN AGAINST CONCRETE BLOCK FRONT VIEW SILICONE SEALANT 36" (914mm) 18" (457mm) 4" (102mm) 8" (203mm) (2) CLEARANCE HOLES FOR 1/2 I.P.S. SUPPLIES NOT LESS THAN 1-1/4 DIA. 24" (610mm) HOSE BRACKET 12" (305mm) STRID1000 STRAINER FINISHED FLOOR 3/4" (19mm) 36" (914mm) DRAIN QIC-3XH 3" (76mm) PIPE (BY OTHERS) SECTION THRU DRAIN CONNECTION 6" (152mm) SUGGESTED INSTALLATION THRU DRAIN PIPE 12" (305mm) 12" (305mm) 24" (610mm) 1-1/2" (38mm) 10" (254mm) 3 24" (610mm) REMOVABLE STAINLESS STEEL STRAINER (STRID1000) 1/2 24" (610mm) ROUGH-IN DETAILS TOP VIEW 3" PIPE BY OTHERS ROUGH-IN DETAILS FRONT VIEW (QIC3XH) NEOPRENE GASKET INTEGRAL DRAIN BODY Installation Note : QIC32 Quick Drain Connector for 2" pipe or QIC3SN Quick Drain Connector for cast iron soil pipe must be ordered separately. IMPORTANT: Roughing-in dimensions may vary 1/2" and are subject to change or cancellation without prior notice. Customer Service Canada Fiat Products 10 Customer Service United States Revised 6/10

124 Spec Seq#: 97 SINK FAUCET Z843M1 TAG Engineering Specifications: Zurn AquaSpec Z843M1 Polished chrome-plated cast brass 8" [203mm] sink faucet with quarter turn ceramic disc cartridges, 3/8" [10mm] short swivel inlets providing adjustable centers from 7-1/4" [184mm] to 8-3/4" [222mm], integral service stops and a 6" [152mm] centerline cast brass spout with chemical resistant atmospheric vacuum breaker, 3/4" hose threaded outlet, pail hook and adjustable wall brace. Unit is furnished with 2-1/2" [64mm] vandal-resistant color-coded brass lever handles. Vacuum breaker is certified to the Uniform Plumbing Code, ASSE and CSA B (Note: Atmoshperic vacuum breaker not intended for continuous pressure applications.) Note: All dimensions are for reference only. Do not use for pre-plumbing OPTIONAL ACCESSORIES Suffix Description -CS Check Stops -HCT Hot/Cold Text Indexes -LSI 2-1/2" [64mm] Long Swivel Inlets -RC Rough Chrome Plated -WHK Wall Hook -5H 5' [152cm] Vinyl Hose -6P Master Carton (Qty. 6) ZURN INDUSTRIES, LLC COMMERCIAL BRASS OPERATION 2640 SOUTH WORK STREET FALCONER NY Phone: Fax: In Canada: ZURN INDUSTRIES LIMITED 3544 Nashua Drive Mississauga, Ontario L4V1L2 Phone: 905/ Fax: 905/ AquaSpec is a registered trademark of Zurn Industries, LLC 2007 Zurn Industries, LLC Rev. H Date: 10/19/11 C.N. No Dwg. No Product No. Z843M1

125 Spec Seq#: 98 MOP HANGER 889-CC FEATURES GENERAL: Model No. 889-CC is 24" long x 3" wide, stainless steel with three (3) rubber tool grips. This is used with the 36" x 24" x 10" Molded-Stone Mop Service Basin with Shelf (MSB-3624) and the 24" x 24" x 10" Molded-Stone Mop Services Basin less Shelf (MSB-2424). NOTES OPTIONS FIAT PRODUCTS A CRANE PLUMBING COMP ANY * Not furnished by Fiat Products. Description for specification purposes only. CR/PL 09/02 Printed in U.S.A.

126 Spec Seq#: 99 HOSE AND HOSE BRACKET 832-AA FEATURES GENERAL: Long flexible, heavy duty 5 /8" rubber hose. Cloth reinforced with 3 /4" brass coupling at one end. Bracket is 5" long x 3" wide, stainless steel with rubber grip. Hose and Hose Bracket are used with the 36" x 24" x 10" Molded-Stone Mop Service Basin with Shelf (MSB-3624) and the 24" x 24" x 10" Molded-Stone Mop Services Basin less Shelf (MSB-2424). NOTES OPTIONS FIAT PRODUCTS A CRANE PLUMBING COMP ANY * Not furnished by Fiat Products. Description for specification purposes only. CR/PL 09/02 Printed in U.S.A.

127 -- MV-1 -- Spec Seq#: 100

128 Spec Seq#: 101 Maxline Point of use Thermostatic Valve Symmons recognizes that safety and reliability are important factors when selecting a Thermostatic Mixing Valve. Maxline s durable design and trusted engineering provide our customers with industry leading scald protection and quality that is synonymous with the Symmons brand. Applications Kitchen and Lavatory faucets Sensor or Metering faucets Tempered water for Roman Tub fillers NOT intended for use on emergency eye wash or shower stations 7 Series Maxline Lead free** brass, bronze, and stainless steel construction Factory tested between 60 F to 140 F (15.6 C to 60 C) Pressure tested up to 125 psi Inlet and Outlet sizes ranging from 3/8 to 3/4 Single valve flow rates up to 14 gpm Thermal motor to quickly respond to changes in inlet temperature Tamper resistant temperature control handle/protective cap Adaptable to multiple installation types Copper sweat IPS PEX Compression (7-210 models only) **According to US Senate bill S.3874, the term lead free is defined as follows: not more than a weighted average of 0.25 percent lead when used with respect to the wetted surfaces of pipes, pipe fittings, plumbing fittings, and fixtures Thermostatic Mixing Valve

129 Spec Seq#: 101 Maxline Stainless steel body Checks/strainers on inlets Checks/strainers on inlets Temperature control handle (flip over to adjust temperature) Cast brass body Temperature control handle (flip over to adjust temperature) Ultra responsive thermal motor Ultra responsive thermal motor Valve Model CK Tamper resistant protective cap Male IPS/sweat connections Valve Model CK-MS Tamper resistant protective cap Also available with PEX or female IPS connections (1/2" only) Flow Rate - gpm (L/min) Pressure Differential Model # Size Connection Min Flow Rate per ASSE psi 10 psi 20 psi 25 psi 30 psi 45 psi 34 kpa 69 kpa 138 kpa 172 kpa 207 kpa 310 kpa CK 3/8 Compression gpm L/min CK-MS 1/2 Male NPT gpm 1/2 Female Sweat L/min CK-F 1/2 Female NPT gpm L/min CK-PEX 1/2 PEX gpm L/min CK-M 3/4 Male NPT gpm L/min CK-FS 3/4 Female Sweat gpm L/min Symmons Industries, Inc., 31 Brooks Drive, Braintree, MA Tel: SYMMONS, (781) Fax: , (781) Copyright 2013 Symmons Industries, Inc., Braintree, Massachusetts /13

130 -- MV-1 WITH S/S CABINET IF NEEDED -- Spec Seq#: 102

131 Spec Seq#: CK Maxline Specification Submittal Model Number CK Modifications -B -D -NI Compliance -ASME A ; CSA B ASSE 1017; CSA B ASSE 1070; CSA B125.3 Connections: 3/8 compression fittings Wall cabinet in white enamel finish including wall mounting bracket 3/8 compression fitting to allow water bypass for hot and cold supply faucet Nickel plated -T Stainless steel cabinet in place of standard white cabinet -W Wall mounting bracket Note: Append appropriate -suffix to model number. Specification Water temperature limiting valve including integral checks and dual stainless steel strainers for double protection against suspended particles in supply lines. Valve made from lead free* metal components (see table 1 for flow rates). Temperature control range: 59 F F (15 C - 45 C) Minimum supply pressure: 20 psi (138 kpa) Maximum supply pressure: 125 psi (862 kpa) Inlet to outlet temperature differential: 10 F (5.55 C) *According to US Senate bill S.3874, the term lead free is defined as follows: not more than a weighted average of 0.25 percent lead when used with respect to the wetted surfaces of pipes, pipe fittings, plumbing fittings, and fixtures Warranty 5 Years - for commercial installations. Refer to for complete warranty information. -CA (AB 1953) -NSF/ANSI 61.9; NSF/ANSI 372 -US S.3874 c Table 1: Flow Rate - gpm (L/min) Valve Model CK Size Connection 3/8 Compression (10 mm) Min. Flow Rate 0.5 gpm (1.9 L/min) 5 psi (34 kpa) 1.0 gpm (3.8 L/min) 10 psi (69 kpa) 2.0 gpm (7.6 L/min) Pressure Differential - psi (kpa) 20 psi (138 kpa) 3.0 gpm (11.4 L/min) 25 psi (172 kpa) 3.5 gpm (13.3 L/min) 30 psi (207 kpa) 4.0 gpm (15.2 L/min) 45 psi (310 kpa) 5.0 gpm (19.0 L/min) 1 Symmons Industries, Inc. 31 Brooks Drive Braintree, MA (800) Fax: (800) Symmons Industries, Inc. gethelp@symmons.com ZV-1153 REV D 05/27/14

132 Spec Seq#: CK Maxline Specification Submittal Dimensions A A B C D Measurements CK 4 1/2, 114 mm 5 1/4, 133 mm 2, 51 mm 2 1/2, 64 mm B C D Note: Dimensions are subject to change without notice. 2 Symmons Industries, Inc. 31 Brooks Drive Braintree, MA (800) Fax: (800) Symmons Industries, Inc. gethelp@symmons.com ZV-1153 REV D 05/27/14

133 -- MV-2 -- Spec Seq#: 104

134 Spec Seq#: 105

135 Spec Seq#: 105

136 -- ESP-1 -- Spec Seq#: 106

137 Spec Seq#: 107 STANCOR SE /230 VOLT SINGLE PHASE DUPLEX OIL MINDER ELEVATOR SUMP PUMP SPECIFICATION The contractor shall furnish and install a Stancor Model SE-40 complete duplex pump and Oil- Minder control system for each elevator sump, as shown on the drawings. The pumping system shall be capable of pumping water while containing oil. The system shall function automatically and shall provide local visual LED indicator lights for EACH of the following events a) the presence of oil in the sump when the pump is signaled to run, b) high liquid in the sump, c) high amps or a locked rotor motor condition, d) electrical power to the panel and e) pump activation. An alarm that occurs only in the event of a high liquid level condition and/or oil detected in the pit shall not be considered equal and will not be accepted. Provide dry contacts for remote monitoring of oil detected, high water/sump level alarm/motor overload. The Oil Monitoring Control System shall have a minimum of 10 years of proven reliability. The sump pumps shall be a Model SE-40, heavy duty submersible type, each capable of pumping 50 5 TDH. The motor shall be rated 4/10 H.P., 1 phase, 60 hertz, 115 or 230 volt, and shall be capable of operating continuously or intermittently and shall include thermal and overload protection. The pump discharge shall have a minimum discharge connection size of 2. The motor housing and fastening bolts shall be constructed of 304 Stainless Steel and the mechanical seals shall be housed in a separate oil-filled compartment. The pump shall have a semi-open non-clogging vortex impeller, and shall be designed for floor mounting complete with support legs. The main float (lead pump on float) will rise (close) when the liquid level increases in the sump pit. Pump #1 contactor should close to allow the pump to discharge the liquid as long as the oil sensor has a resistance to ground lower than the set point (i.e., the oil sensor is in conductive water and normal operation is allowed). The pump relay will open when the liquid level drops below the oil sensor probe tip (pump off). There is a one (1) second time delay after the liquid level drops below the oil sensor probe tip. At this point, the oil sensor probe voltage drops from 5VDC to 15 millivolts DC until the pump-on float rises again, at which point the oil sensor input voltage returns to 5VDC. The 15 millivolt input greatly reduces the potential field and subsequent metal ion exchange, thus preventing build up of foreign matter on the probe surface. When the pump on float rises again the alternator will activate Pump #2. The alternator allows for equal wear on each of the pumps. If water level continues to rise and raises float #2 (high level alarm float / lag pump start float), the lag pump contactor will be energized until water level drops below the oil-minder probe (pump's stop sensor).. If float number #2 rises both pumps are activated. If the water condition continues and the two pumps cannot bring down the water level below float #2 The alarm/rms will activate after the time set point is reached (The point timer, RMS alarm