D2HW. Sealed Ultra Subminiature Basic Switch. Ordering Information

Transcription

1 Sealed Ultra Subminiature Basic Switch Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action. The case dimensions are 78% of conventional, contributing to down-sizing of mechanical modules. Extra-long stroke even without levers. (OT: 1.4 mm) Made of environment-friendly materials. ll are lead-free, including molded lead. Ordering Information Model Number Legend Mounting Structure : Without posts (base-mounting) BR: Posts on right BL: Posts on left C: M3-screw mounting 2. Ratings 2: 1 m at 5 VDC to 2 at 12 VDC 3. ctuator : Pin plunger 1: Hinge lever 2: Long hinge lever 3: Simulated roller lever 6: Leaf lever 7: Simulated leaf lever 8: Long leaf lever 4. Contacts 1: SPDT 2: SPST-NC (Molded lead only.) 3: SPST-NO (Molded lead only.) 5. Terminals D: Straight PCB terminals DR: Right-angled PCB terminals DL: Left-angled PCB terminals H: Solder terminals M: Molded lead s downwards MR: Molded lead s on right-side ML: Molded lead s on left-side

2 List of Models PCB-mounted Models ctuator Terminals Contact form Model With posts on right With posts on left Without posts Pin plunger For PCB Straight SPDT D ngled -BR21DR -BL21DL --- Hinge lever Straight D Long hinge lever ngled -BR211DR -BL211DL --- Straight D ngled -BR221DR -BL221DL --- Simulated roller lever e Straight D ngled -BR231DR -BL231DL --- Models with Solder Terminals or Molded Lead Wire Terminals ctuator Terminals Contact form Model With posts on right With posts on left M3-screw mounting Pin plunger Solder SPDT -BR21H -BL21H -C21H Molded lead Downwards SPDT -BR21M -BL21M -C21M SPST-NC -BR22M -BL22M -C22M SPST-NO -BR23M -BL23M -C23M Right-side SPST-NC -BR22MR -BL22MR -C22MR SPST-NO -BR23MR -BL23MR -C23MR Left-side SPST-NC -BR22ML -BL22ML --- SPST-NO -BR23ML -BL23ML --- Hinge lever Solder SPDT -BR211H -BL211H -C211H Molded lead Downwards SPDT -BR211M -BL211M -C211M SPST-NC -BR212M -BL212M -C212M SPST-NO -BR213M -BL213M -C213M Right-side SPST-NC -BR212MR -BL212MR -C212MR SPST-NO -BR213MR -BL213MR -C213MR Left-side SPST-NC -BR212ML -BL212ML --- SPST-NO -BR213ML -BL213ML --- Long hinge Solder SPDT -BR221H -BL221H -C221H lever Molded lead Downwards SPDT -BR221M -BL221M -C221M SPST-NC -BR222M -BL222M -C222M SPST-NO -BR223M -BL223M -C223M Right-side SPST-NC -BR222MR -BL222MR -C222MR SPST-NO -BR223MR -BL223MR -C223MR Left-side SPST-NC -BR222ML -BL222ML --- SPST-NO -BR223ML -BL223ML ---

3 ctuator Terminals Contact form With posts on right Model With posts on left M3-screw mounting Simulated Solder SPDT -BR231H -BL231H -C231H roller lever Molded lead Downwards SPDT -BR231M -BL231M -C231M SPST-NC -BR232M -BL232M -C232M SPST-NO -BR233M -BL233M -C233M Right-side SPST-NC -BR232MR -BL232MR -C232MR SPST-NO -BR233MR -BL233MR -C233MR Left-side SPST-NC -BR232ML -BL232ML --- SPST-NO -BR233ML -BL233ML --- Leaf lever Solder SPDT -BR261H -BL261H -C261H Molded lead Downwards SPDT -BR261M -BL261M -C261M SPST-NC -BR262M -BL262M -C262M SPST-NO -BR263M -BL263M -C263M Right-side SPST-NC -BR262MR -BL262MR -C262MR SPST-NO -BR263MR -BL263MR -C263MR Left-side SPST-NC -BR262ML -BL262ML --- SPST-NO -BR263ML -BL263ML --- Simulated leaf Solder SPDT -BR271H -BL271H -C271H lever Molded lead Downwards SPDT -BR271M -BL271M -C271M SPST-NC -BR272M -BL272M -C272M SPST-NO -BR273M -BL273M -C273M Right-side SPST-NC -BR272MR -BL272MR -C272MR SPST-NO -BR273MR -BL273MR -C273MR Left-side SPST-NC -BR272ML -BL272ML --- SPST-NO -BR273ML -BL273ML --- Long leaf lever Molded lead Downwards SPDT -BR281M -BL281M -C281M SPST-NC -BR282M -BL282M -C282M SPST-NO -BR283M -BL283M -C283M Right-side SPST-NC C282MR SPST-NO C283MR Note: The length of standard lead s (VSS.5) for molded lead is 3 cm. Specifications Ratings Rated voltage 12 VDC 2 24 VDC 1 42 VDC.5 Resistive load

4 s Operating speed Item Operating frequency Insulation resistance Contact resistance (initial value) Dielectric strength Vibration resistance Shock resistance Life expectancy Degree of protection Degree of protection against electric shock 1 mm to 5 mm/s (for pin plunger ) 3 operations/min Specification 1 MΩ min. (at 5 VDC) 1 mω max. (molded lead : 15 mω max.) 6 VC, 5/6 Hz for 1 min between terminals of the same polarity 1,5 VC, 5/6 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts Malfunction: 1 to 55 Hz, 1.5-mm double amplitude Malfunction: 3 m/s 2 max. Mechanical: 1,, operations min. (3 operations/min) Electrical: 1, operations min. (2 operations/min) IP67 for molded lead IP5 for terminal Class I Proof tracking index (PTI) 175 mbient operating temperature 4 to 85 C (with no icing) mbient operating humidity 95% max. (in temperature range 5 to 35 C) Weight pprox..7 g (for pin plunger with terminals) Contact Specifications Item Specification Material Gap (standard value) Minimum applicable load (see note) Specification Crossbar Gold alloy.5 mm 1 m at 5 VDC Note: Minimum applicable loads are indicated by N standard reference values. This value represents the failure rate at a 6% (λ6) reliability level. The equation λ6=.5 1 6/operations indicates that a failure rate of 1/2,, operations can be expected at a reliability level of 6%. Contact Form SPDT Contacts SPST-NC Contacts (Molded Lead Wire Models) SPST-NO Contacts (Molded Lead Wire Models) COM NO NC (Blue) (Red) COM NC (Red) COM NO (Blue) Note: Lead colors are indicated in parentheses.

5 Dimensions Mounting Structure and Reference Positions for Operating s Note: ll units are in millimeters unless otherwise indicated. The reference positions used for FP,, and TTP values are as shown below for each type of mounting. - Models without Posts -B Models with Posts -C M3-screw Mounting Models 1.7 dia. 1.7 dia. 3.1 dia. 3.3±.15 Reference position Reference position Reference position Mounting Hole Dimensions (Reference) dia. hole 2.6 (depth: 5 mm min.) Mounting Hole Dimensions (Reference) dia. hole (depth: 1.5 mm min.) M3 tap Terminals Straight PCB Terminals ngled PCB Terminals Solder Terminals 3.5 Three-.6 Three-.6 (3.1) Three-2 PCB Cutout Dimensions (Reference) PCB Cutout Dimensions (Reference) Three, dia. hole dia. hole (depth: 5 mm min.) 2.6 Molded Lead Wires Downwards Three, 1 +.1dia. hole Molded Lead Wires on Left-side Molded Lead Wires on Right-side COM VSS.5 NO VSS.5 (Blue) NC VSS.5 (Red)

6 Dimensions and Operating s Note: 1. ll units are in millimeters unless otherwise indicated. 2. Dimensions not indicated in the above diagrams have a tolerance of ±.2 mm. 3. The operating characteristics are for operation in the direction ( ). Pin Plunger Models without Models with posts posts and M3-mounting dia. OF max..75 N {76 gf} RF min..1 N {1 gf} OT min. (1.4 mm) MD max..25 mm 11.2 mm 7.2 mm 1.4±.2 mm 6.4±.2 mm TTP max. 9.1 mm 5.1 mm Hinge Lever t =.3 stainless Models without Models with posts - 21 posts and M3-mounting OF max..75 N {76 gf} RF min..7 N {7 gf} OT min. (1.6 mm) MD max..5 mm 12.8 mm 11.5±.5 5mm 8.8 mm 75± 7.5±.5mm TTP max. 1 mm 6 mm Long Hinge Lever - 22 Simulated Roller Lever R t =.3 stainless t =.3 stainless OF max. RF min. OT min. MD max. TTP max. Models without posts.5 N {5 gf}.3 N {3 gf} (2.5 mm).8 mm 15.5 mm 13.3±.83± 8mm 11 mm Models without posts Models with posts and M3-mounting 11.5 mm 93± 9.3±.8mm 7 mm Models with posts and M3-mounting OF max..65 N {66 gf} RF min..5 N {5 gf} OT min. (1.9 mm) MD max..5 mm 16.5 mm 12.5 mm 15.2±.5 mm 11.2±.5 mm TTP max mm 9.5 mm

7 Leaf Lever - 26 Simulated Roller Lever - 27 Long Leaf Lever dia. 2R 2.85±1 t =.2 stainless t =.3 stainless t =.3 stainless 3.3±.15 COM VSS.5 NO VSS.5 (Blue) NC VSS.5 (Red) OF max. RF min. OT min. MD max. TTP max. OF max. RF min. OT min. MD max. TTP max. OF max. RF min. OT min. MD max. TTP max. Models with posts and M3-mounting 1.8 N {183 gf}.2 N {2 gf} (1.8 mm).2 mm 9.3 mm 74± 7.4±.5mm 5.8 mm Models with posts and M3-mounting 1.8 N {183 gf}.2 N {2 gf} (2. mm).5 mm 12.5 mm 1.8±.5 mm 8.9 mm Models with posts and M3-mounting.9 N {92 gf}.5 N {5 gf} (2.8 mm).7 mm 19 mm 15.4±1.5 mm 12.8 mm

8 Precautions Cautions Degree of Protection Do not use this product in water. lthough molded lead satisfy the test conditions for the standard given below, this test is to check the ingress of water into the switch enclosure after submerging the Switch in water for a given time. Satisfying this test condition does not mean that the Switch can be used in water. IEC Publication 529, degree of protection IP67. Do not operate the Switch when it is exposed to water spray, or when water drops adhere to the Switch surface, or during sudden temperature changes, otherwise water may intrude into the interior of the Switch due to a suction effect. Prevent the Switch from coming into contact with oil or chemicals. Otherwise, damage to or deterioration of Switch materials may result. Do not use the Switch in areas where it is exposed to silicon adhesives, oil, or grease, otherwise faulty contact may result due to the generation of silicon oxide. Terminal Connection When soldering the lead to the terminal, first insert the lead conductor through the terminal hole and then conduct soldering. Make sure that the capacity of the soldering iron is 3 W maximum. Do not take more than 3 s to solder the switch terminal. Improper soldering involving an excessively high temperature or excessive soldering time may deteriorate the characteristics of the Switch. When soldering the lead to the PCB terminal, pay careful attention so that the flux and solder liquid level does not exceed the PCB level. Side-actuated (Cam/Dog) Operation When using a cam or dog to operate the Switch, factors such as the operating speed, operating frequency, push-button indentation, and material and shape of the cam or dog will affect the durability of the Switch. Confirm performance specifications under actual operation conditions before using the Switch in applications. Correct Use Mounting Turn OFF the power supply before mounting or removing the Switch, wiring, or performing maintenance or inspection. Failure to do so may result in electric shock or burning. For M3-screw mounting, use M3 mounting screws with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of.29 N m {3 kgf cm}. Exceeding the specified torque may result in deterioration of the sealing or damage. For with posts, secure the posts by thermal caulking or by pressing into an attached device. When pressed into an attached device, provide guides on the opposite ends of the posts to ensure that they do not fall out or rattle. Mount the Switch onto a flat surface. Mounting on an uneven surface may cause deformation of the Switch, resulting in faulty operation or damage. Operating Body Use an operating body with low frictional resistance and of a shape that will not interfere with the sealing rubber, otherwise the plunger may be damaged or the sealing may deteriorate. Handling Do not handle the Switch in a way that may cause damage to the sealing rubber. When handling the Switch, ensure that uneven pressure or, as shown in the following diagram, pressure in a direction other than the operating direction is not applied to the ctuator, otherwise the ctuator or Switch may be damaged, or the service life may be reduced. Wiring Molded Lead Wire Models When wiring molded lead, ensure that there is no weight on the or that there are no sharp bends near the parts where the is drawn out. Otherwise, damage to the Switch or deterioration in the sealing may result. Using Micro Loads Even when using micro load within the operating range, inrush currents or surges may decrease the life expectancy of the Switch. Therefore, insert a contact protection circuit where necessary. LL DIMENSIONS SHOWN RE IN MILLIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by Cat. No. B15-E1-3 RFD electronic gmbh * n der Kanzel 2 * Gaukönigshofen * Telefon 9337 / * 9337 /