Sheetmetal
The Lucky Sucker TC Softail Conversion Are you ready to turn your run of the mill, everyday Softail into something cool that will turn heads and grab attention? With the Lucky Sucker conversion, the transformation from stock to custom can be done easily and quickly. The Lucky Sucker consists of a custom gas tank, tank adapter, a solo seat kit, swingarm mounted 'rigid-style' rear fender and fender struts. These parts are as 'bolton' as you can get and will transform your bike as drastically. Each part was designed to work together or can be used as stand-alone components, giving you the creative lead while building your custom vision without breaking the bank. Custom Gas Tank The Lucky Sucker tank is designed for easy bolt-on installation when used with the tank adapter CCI #641905 (sold separately) on any 00-Up EFI or carbureted Twin Cam Softails or custom applications (EFI models requires the use of a Harley Davidson OEM fuel pump #75268-07D). An Indian Larry dished style tank and Cole Foster bobber tank are also available for use with the Lucky Sucker tank adapter. 641900 Lucky Sucker Gas Tank for Carbureted models..........$299.99 641906 Lucky Sucker Gas Tank for EFI Models..................$299.99 641911 Indian Larry Style Dished Tank 3.5 Gal for EFI models.......$499.99 641912 Indian Larry Style Dished Tank 4.5 Gal for EFI models.......$499.99 641913 Indian Larry Style Dished Tank 3.5 Gal for Carbureted models....................................................$439.99 6419 Indian Larry Style Dished Tank 4.5 Gal for Carbureted models....................................................$439.99 600158 Cole Foster Bobber Tank for EFI models................$299.99 641908 Lucky Sucker replacement gas cap......................$19.99 Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust. Softail Tank Adapter This part makes installing a custom gas tank onto your 00-Up Twin Cam Softail as easy as removing the stock tank and bolting this adapter on. The adapter bolts-on to the stock mounting points and has a mount built into it for the OEM ignition switch. You can bolt the Lucky Sucker tank directly onto it or you can fabricate your own with the builders kit that will allow you place the tank mounts and ignition switch where-ever you like. 641905 Lucky Sucker Gas Tank Adapter........................$89.99 641910 Lucky Sucker tank adapter builders kit..................$69.99 Rigid-Style Rear Fender & Struts The perfect way to give your Softail that Old School rigid look. Designed to fit Softail models from 00-Up and custom applications. Installation of the fender will require the separate purchase of a set of chrome or raw fender struts or you can custom build your own. 641907 Lucky Sucker 9 wide rigid-style fender (200 mm rear tires)....................................................$189.99 641901 Lucky Sucker 7.25 wide rigid-style fender (150 mm rear tires)....................................................$169.99 641902 Lucky Sucker rigid-style fender struts, chrome (pr).......$49.99 641903 Lucky Sucker rigid-style fender struts, raw (pr)...........$34.99 Note: Minor frame modification is required. The Lucky Sucker Softail Solo Seat Kit The perfect accessory to the rigid fender kit since your stock seat will no longer fit. This seat completes the transformation of your Softail to a pure rigid-look. The seat is solid mounted to keep you as low to the ground as possible. Seat kit comes complete with a raw steel seat pan and all necessary mounting brackets and hardware. Designed to fit FX Softail models (except Deuce) from 00-06 and FL Softail models from 00-Up. 641904 Lucky Sucker Solo Seat kit............................$179.99 Note: Upholstry is required..02 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL 641900 Before SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL 641904 EXHAUST INTAKE 641911 ENGINE GASKETS 641903 TRANSMISSION & CLUTCH DRIVELINE 641907 WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES 600158 GENERAL 641905 CROSS REFERENCE www.customchrome.com.03
11523 620100 Steeler Front Fenders Super-smooth radiused bends without steps and a low-profile are the mark of the these fenders. Each heavy-duty fender is 18 gauge steel and non-drilled to permit maximum custom positioning. 11523 4 3/4"-wide for custom applications....................$99.99 11524 6"-wide for FL and FXST models........................$99.99 Note: Always be sure to check for fitment and clearance before painting. 620101 620102 600631 Doss Dixie Fenders Master bike builder Rick Doss comes back with yet another hot style for your custom machine. Fenders are made from 18 gauge cold rolled steel and are ready for fit and paint. All you need is your imagination! Front Fenders 620100 4 3/4"-wide..........................................$129.99 620101 6"-wide.............................................$129.99 Rear Fenders 620102 7 1/4"-wide..........................................$9.99 620103 9"-wide.............................................$9.99 Note: Always be sure to check for fitment and clearance before painting. Roller 600630 Forty Tombstone Custom Front Fenders Custom steel fenders for use with 21x3.5 front wheels. Fenders come non-drilled for custom applications. Mounts are 9 wide. 600630 Outlaw 21x5.50 front fender - 40 Length........... $125.99 600631 Gunfire 21x5.50 front fender - 29.75 Length........ $125.99 Note: Always be sure to check for fitment and clearance before painting. Custom Steel Front Fenders Construction starts with two pieces of heavy-gauge steel which are formed and welded into shape. Finally, the fender is sanded and finished out, making it primer ready. Used by many of the top bike builders for their unmistakable style and superior quality. Designed for custom applications. Be sure to check installation and fit before painting. 4 3/4"-Wide Fenders 13794 Forty................................................$99.99 13795 Roller...............................................$99.99 13796 Tombstone..........................................$99.99 6"-Wide Fenders 11526 Tombstone..........................................$99.99 11531 Roller...............................................$99.99 Note: Always be sure to check for fitment and clearance before painting..04 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS 605712 FOOT 6057 HAND LIGHTING 605715 ELECTRICAL EXHAUST Touring Front Fenders These front fenders are a direct replacement front fender for Street Glide & Road Glide models and will fit any Touring models when you want to eliminate the fender lights and trim. Comes in two styles Smooth or Ribbed. The ribbed fenders have a three rib pattern with the middle one longer than the outer two. They are a stamped steel construction and measure 6-1/2 wide and come pre-drilled. Fits all 94-13 Touring models. Front Fenders for 16 and 18 Wheels 605712 Smooth front fender......................................................................................................... $249.99 605713 Ribbed front fender.......................................................................................................... $249.99 Front Fender for 21 Wheels: 6057 Smooth front fender......................................................................................................... $249.99 605715 Front Fender with Ribs in Rear................................................................................................ $249.99 Note: Always be sure to check for fitment and clearance before painting. INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.05
629730 629732 629731 629733 Custom Fenders for Touring Models with 21x3.5 Wheels These versions of our popular front fenders come with some added width and extended mounting tabs to accommodate taller 21 wheels on Touring models. Fitment must be checked before paint, recommended for 120/70-21 tires. 629730 Steeler 6 fender.............................................................................................................. $1.99 629731 Forty 6 fender................................................................................................................ $1.99 629732 Roller 6 fender............................................................................................................... $1.99 629733 Tombstone 6 fender........................................................................................................... $1.99 Note: Always be sure to check for fitment and clearance before painting. 654009 654183 Ness Big-Wheeler Front Fender Great styling for the front of your Touring model A must when using a 21 x 3.50 on 97-99 Touring models A direct replacement fender for all 00-13 Touring models This fender will drastically improve the looks of the front end of your bike. 631080 Big-Wheeler Front Fender, Made of Fiberglass.........$249.99 Note: Always be sure to check for fitment and clearance before painting. Arlen Ness Wrapper Front Fenders for Touring Models These fenders wrap perfectly around that 23 or 26 custom wheel on your Bagger. They are a direct bolt-on for 87- Touring models and no fender spacers are required. Available in a Carbon Composite or Fiberglass construction. For all -Up Touring models 654183 26 inch Wrapper front fender, Carbon composite.......$399.99 654182 23 inch Wrapper front fender, Carbon composite.......$399.99 For all 87-13 Touring models 654081 26 inch Wrapper front fender, Composite..............$299.99 654009 23 inch Wrapper front fender, Fiberglass...............$299.95 Note: Always be sure to check for fitment and clearance before painting..06 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS FOOT HAND Quickbob Front Fender This fender compliments our ever popular Quickbob and Fatbob rear fender kits. It fits 1980 and later FXST, FXSTC and FXWG models. 699022 Quickbob front fender...............................$159.99 Note: Always be sure to check for fitment and clearance before painting. Front Fenders for 4-Speed Models Our replacement steel fenders fit all 4-speed FL models from 81-84, and have all of the correct holes and dimples for fender trim and tip lights. 240380 81-84 style (replaces OEM 59093-79)................ $99.99 Note: Always be sure to check for fitment and clearance before painting. LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE Steel Front Fender for Fat Boy Models Get the great Fat Boy look on your Heritage Softail model, or replace damaged fenders on Fat Boy models from 90-13. Replaces OEM 59139-89. 78312 Steel Front Fender....................................$81.99 Note: Always be sure to check for fitment and clearance before painting. Front Fenders for Heritage Softail Models Replacement fender without holes and dimples for custom applications, i.e. early style fender tips. Heavy-duty braces are riveted to fender shell. Fits Heritage Softail models from 86-13, as well as all Fat Boy models when a full fender is desired. 13251 Smooth-style fender.............................. $109.99 Exact duplicate of Original Equipment fender with all holes and dimples for stock lighted fender tips as well as upper and lower trim. Heavy-duty braces are riveted to fender shell. Fits Heritage Softail models from 86-13, as well as all Fat Boy models when a full fender is desired. 13255 Stock replacement fender (repl. OEM 59129-86)...... $99.99 Note: Always be sure to check for fitment and clearance before painting. GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Ness Cafe Front Fender This sleek front Cafe fender is made out of durable A.B.S. plastic ready for primer and paint. The mounting holes are undrilled to permit use on Narrow Glide front forks with 19" or 21" wheels. 05007 Ness Cafe Front Fender................................$69.99 Note: Always be sure to check for fitment and clearance before painting. Front Fender for Early Touring Models A precisely-crafted reproduction of the 54-84 4-speed Dresser front fender with properly rolled edges and structural reinforcement. Will also fit Touring models from 80-13. 13193 Early Touring Fender.............................. $109.99 Note: Always be sure to check for fitment and clearance before painting. INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.07
266 Custom Fender for Wide Glide Front Ends A bolt-on version that completely replaces the stock front fender on Dyna Wide Glide, Softail and 4-speed FXWG models from 80-06 (except Heritage Softail, Fat Boy and Springer Softail models). Styled with an added accent bead around its entire edge. These fenders include polished aluminum spacer blocks, and fit with 19" or 21" wheels only. May require drilling. 6 wide. 13183 Custom fender.............$139.99 Note: Always be sure to check for fitment and clearance before painting. 19652 Fenders for Narrow Glide Models Original-style front fenders for FX, FXR, Sportster and Dyna Glide models from 73-03. Unpainted and include chrome brackets and the rivets necessary to install them. 19652 Fender (repl. OEMs 59007-73TB, 59111-74)...................$59.99 Note: Always be sure to check for fitment and clearance before painting. Front Fenders for Wide Glide and Softail Models A trim, tire-hugging fender with chrome brackets, ready-to-paint. A reproduction of the Original Equipment front fender on FXST, FXSTC and 4-speed FXWG models from 80-07 and Dyna Wide Glide models 80-05. Replaces OEM 59924-80. 266 Fender with chrome mounting bracket.....................$42.99 26350 Fender with raw steel mounting bracket................... $39.99 Wide Glide Front Fender for 35mm Forks Custom front fender for the 35mm front forks on FX, FXR and Sportster models from 73-E87. Unpainted, and complete with integral chrome-plated brackets. For use with 18", 19" or 21" wheels. Replaces OEM 59031-83. 26163 Fender with Chrome Brackets $45.99 Note: Always be sure to check for fitment and clearance before painting. Custom Skirted Fender with Flip Based loosely on the skirted early K model front fender, this timeless classic has been updated to fit all 35mm and 39mm front forks from 73-13. Unpainted (5 3/4 wide). 13196 Custom skirted fender.......$112.99 Note: Fender should not be used on bikes equipped with highway bars. Always be sure to check for fitment and clearance before painting. Springer Front Fender for Big Twins Accurate, faithful reproduction of the original fender. Complete with braces and fender edge reveal. Fits all Big Twins from 37-48. Replaces OEM 59000-36 (measures 7 1/2 wide). 26520 Springer front fender.......$109.99 Note: Always be sure to check for fitment and clearance before painting. Narrow Front Fenders These replacement narrow front fenders fit FX, FXR, Sportster and Dyna Glide models from 73-99 with 35mm or 39mm front forks. Available chrome or unpainted with chrome brackets. For use with narrow 18", 19" and 21" rims. Replaces OEM 59031-83. 240331 Chrome fender and bracket..... $50.99 240383 Raw fender and bracket......$31.99 Note: Always be sure to check for fitment and clearance before painting..08 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Narrow Front Fender for FL Models Custom, unpainted steel narrow FXWGstyle front fender for all 4-speed FL model forks from 49-84. Includes chrome mounting brackets, the fender profile is designed to clear 18", 19" and 21" tires. 26159 Narrow Front Fender.........$54.99 Note: Always be sure to check for fitment and clearance before painting. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS Khrome Werks Lower Front Fender Trim Pieces These American-made lower fender trims follow the contour of the Original Equipment front fenders. Designed to replace the stock parts on many models from 86-07 Each trim comes complete with all required mounting hardware. 31560 Fits FLT, FLHT, FLHS and Road King models from 86-07 (repl. OEM 59231-86) shown.............$31.99 31600 Fits all Heritage Softail models from late 86-07 (repl. OEM 59235-86).........................$31.99 Chrome Lower Fender Trim A reproduction of the lower trim installed on FL models from 68-75, but completely chrome-plated without the black accents. Fits all FL, FLT, FLHT and FLHS models from 49-85. Comes complete with chrome mounting hardware. 26585 Replaces OEM 59233-68......$20.99 Hooded Skull Fender Ornament Chrome with a satin black hood Universal mount will fit most front fenders Includes a rubber mounting gasket and hardware (requires drilling fender for installation) 621124 Hooded skull fender ornament, sold each................. $27.99 FOOT HAND LIGHTING ELECTRICAL 26589 EXHAUST 26588 Vintage V Style Fender Tips and Trim Reproductions of the chrome front and rear fender tips and stainless steel trim pieces. The fender tips are die-cast in the V design used as Original Equipment from 59-66. The front fender side trim and front fender lower edge trim are formed in stainless steel. Each part includes hardware, and fits all FL front fenders from 49-86 and all FL rear fenders from 58-86. 26586 Front fender trim set (includes CC # s 26588 and 26595)............$29.99 26588 Front fender tip V design (indexed for side spears) as used from 59-66 (repl. OEM 59216-59).........$18.99 26595 Front fender side spear set as used from 57-73 (repl. OEMs 59205-57 and 59206-57)...............$16.99 26589 Rear fender tip V design as used from 59-66 (repl. OEM 59887-59)............................$18.99 Skull Head Fender Trim Quality die-cast trim piece is contoured to match the front fender on FL, FLT, FLHT models 80-13 and many custom applications. Features a highly detailed skull head logo with gold trim and 12 volt illuminated eyes. 240078 Chrome with gold trim and illuminated eyes..................................... $53.99 240071 Eagle Head Fender Ornament This die-cast fender ornament is highly detailed and come with illuminated eyes. The illuminated version is internally lit with 2 independent 12V light bulbs which can be connected to the turn signals or running lights. Fits FL, FLT and FLHT models 80-13 and many custom applications. 240071 Illuminated eyes with gold accented beak..................................$24.99 27824 Replacement bulb, 12V 2W (box of 10).........................................$0.60 INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES Chrome Front Fender Trim Bumper Chrome front fender trim bumper for FLT 93-Up models (except 98-Up FLTR and Trike models), replaces OEM 91085-83C. 688660 Fender trim bumper fits FLT 93-Up........................... $52.99 Indian Head Fender Lamp For a vintage look on your bike just add our fender lamp that features a molded Indian Head face in the white plastic lamp lens. Perfectly fits the curvature of most full front fenders used with 16" front wheels. 27512 Chrome housing............................................................$55.99 275 Replacement white lens...................................................... $4.99 www.customchrome.com.09 GENERAL CROSS REFERENCE
605717 605719 605716 605718 Custom Rear Fenders for Touring Models These custom skirted rear fenders features built in saddlebag filler panels which cover the fender struts and the gap between the fender and saddlebags. Available with an optional recessed & curved license plate and a chrome LED 3 function taillight (Turn Signals, Running & Brake Lights) and in a smooth or ribbed design. They come pre-drilled and mount to the stock fender location. Fits all 09-Up Touring models. Note: Some models will require a custom taillights, turn signals and or running light. Will work with accessory 2 & 4 point docking systems. Always be sure to check for fitment and clearance before painting. 605716 Ribbed fender with curved LED license plate assembly............................................................................ $499.99 605717 Smooth fender with curved LED license plate assembly............................................................................ $499.99 605718 Ribbed fender without curved license plate recess................................................................................ $399.99 605719 Smooth fenders without curved license plate recess............................................................................... $399.99 Roller Tombstone Steeler Custom Rear Fenders Wide to super-wide steel rear fenders are designed for custom applications. Be sure to check installation and fit before painting. Steeler 13785 7 1/4"-wide.................................................................. $139.99 13786 8 1/2"-wide.................................................................. $139.99 13787 9"-wide..................................................................... $139.99 Tombstone 13788 7 1/4"-wide.................................................................. $139.99 13789 8 1/2"-wide.................................................................. $139.99 13790 9"-wide..................................................................... $139.99 Roller 13791 7 1/4"-wide.................................................................. $139.99 13792 8 1/2"-wide.................................................................. $139.99 13793 9"-wide..................................................................... $139.99 Note: Always be sure to check for fitment and clearance before painting. Desperado Rear Fender You may have noticed it s simplicity yet distinctive design. This rear fender is truly one of a kind. Measures 9"-wide with 400mm-radius Especially made for 16" and 18" wheels For up to 200 series tires Made of raw, heavy 18-gauge steel 699900 Desperado fender...........$9.99 Note: Always be sure to check for fitment and clearance before painting..10 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
78345 APPAREL SEATS & BAGS FOOT 78347 HAND Replacement Rear Fenders for Softail Models Accurate reproductions of their Original Equipment counterparts. They re pre-drilled for the fender struts and license plate mount, and have the taillight mount in place. They fit all Softail models from 84-99. Available with or without provisions for the turn signal bar. 78345 Without mounting holes for turn signal bar (repl. OEM 59596-89)...................................................$89.99 78347 With mounting holes for turn signal bar (repl. OEM 59126-86).....................................................$89.99 240469 Vintage rear fender without taillight and turn signal mounts.....................................................$89.99 Note: Always be sure to check for fitment and clearance before painting. 88185 LIGHTING ELECTRICAL EXHAUST INTAKE 88180 620101 620102 620100 Doss Dixie Fenders Master bike builder Rick Doss comes back with yet another hot style for your custom machine. Fenders are made from 18 gauge cold rolled steel and are ready for fit and paint. All you need is your imagination! Front Fenders 620100 4 3/4"-wide..........................................$129.99 620101 6"-wide.............................................$129.99 Rear Fenders 620102 7 1/4"-wide..........................................$9.99 620103 9"-wide.............................................$9.99 Note: Always be sure to check for fitment and clearance before painting. Roll-Your-Own Custom Blank Steel Fenders Fabricate your own custom fenders with these blank steel fenders. Made just for the custom bike builder or experienced metalworker. Permit you to cut, style and create your own front and/or rear fenders. Raw steel finish in smooth-side and round-top versions. Compatible with wheels from 16" up to 21". Fenders width is measured from inside edge to inside edge. Smooth-Side Front Fenders with 13 3/8" Radius 88171 Measures 6"-wide, accepts 16" wheels............... $99.99 Smooth-Side Rear Fenders with 13 3/8" Radius 88172 Measures 7 1/4"-wide, accepts 16" wheels............ $99.99 88173 Measures 8 1/2"-wide, accepts 16" wheels........... $119.99 88174 Measures 9"-wide, accepts 16" wheels.............. $124.99 88175 Measures 10 1/2"-wide, accepts 16" wheels......... $129.99 88176 Measures 11"-wide, accepts 16" wheels............. $134.99 Smooth-Side Rear Fenders with 15 3/4" Radius 88184 Measures 7 1/4"-wide, accepts 16" wheels............ $99.99 88185 Measures 8 1/2"-wide, accepts 16" wheels........... $119.99 88186 Measures 9"-wide, accepts 16" wheels.............. $124.99 88187 Measures 10 1/2"-wide, accepts 16" wheels......... $129.99 88188 Measures 11"-wide, accepts 16" wheels............. $134.99 Note: Round-Top fenders are flat along the weld. Round-Top Rear Fenders with 13 3/8" Radius 88177 Measures 4 3/4"-wide, accepts 19" to 21" wheels..... $99.99 88178 Measures 6"-wide, accepts 16" to 18 " wheels........ $99.99 Smooth-Side Front Fenders with 15 3/4" Radius 88179 Measures 7 1/4"-wide, accepts 16" to 18" wheels..... $99.99 88180 Measures 8 1/2"-wide, accepts 16" to 18" wheels.... $119.99 88181 Measures 9"-wide, accepts 16" to 18" wheels....... $124.99 88182 Measures 10 1/2"-wide, accepts 16" to 18" wheels... $129.99 88183 Measures 11"-wide, accepts 16" to 18" wheels...... $134.99 Note: Always be sure to check for fitment and clearance before painting. ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.11
688688 641907 641903 688689 641902 Rigid-Style Rear Fender & Struts The perfect way to give your Softail that Old School rigid look. Designed to fit Softail models from 00-09 and custom applications. Installation of the fender will require the separate purchase of a set of chrome or raw fender struts or you can custom build your own. 641901 Lucky Sucker 7.25 wide rigid-style fender (150 mm rear tires)................................................... $169.99 641907 Lucky Sucker 9 wide rigid-style fender (200 mm rear tires)................................................... $189.99 641902 Lucky Sucker rigid-style fender struts, chrome (pr)...... $49.99 641903 Lucky Sucker rigid-style fender struts, raw (pr).......... $34.99 Note: Always be sure to check for fitment and clearance before painting. Some frame modification required. Chopped and Stock Rear Fenders for Late Sportsters As seen on our Café Sporty! Turn your XL into a café racer, chopper or whatever you see fit. 688688 Chopped rear fender for XL 04-Up.....................$109.99 688689 Stock rear fender for XL 04-Up........................$129.99 Note: Always be sure to check for fitment and clearance before painting. Some models may require some modifications. 13208 13209 Shorty Rear Fender for 07- Softails This fender bolts right onto 07- Softails with a stock 200mm rear tire. We chose to leave the end like the bobbed look of a hinged fender with the back portion taken off but you are welcome to take a grinder to it and give it your personal touch! 699899 Shorty Softail fender................................ $139.99 Note: Always be sure to check for fitment and clearance before painting. Sport Bob Rear Fender Kits for Sportster Models These exclusive fender kits include a new ABS plastic fender extension for the front of the fender, a Cateye taillight assembly with mounting bracket and the extra pop rivets necessary to reinstall your circuit breaker clips. 13209 Fits Sportster models from 94-03..................... $164.99 13208 Fits Sportster models from 82-93..................... $135.99 Note: Always be sure to check for fitment and clearance before painting..12 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL Quickbob Rear Fender for FX Models Custom rear fender for an easy, affordable conversion to the Fat Bob look. Fits stock 4-speed FX frames and uses the stock width fender struts. Cannot be used as a replacement fender for FXWGs. Heavy-gauge metal for lasting service. 13188 Fits FX models from 73-85 (except FXWG, FXST)..........$89.99 Note: Always be sure to check for fitment and clearance before painting. SEATS & BAGS FOOT HAND Custom Fat Bob Rear Fenders Original style universal and custom application fenders. Available with left or right-hand chain cutaway without taillight mount. Fenders measure approx. 38"-long, 7"-wide and 5 1/2"- deep. Fenders are unpainted. Left Chain Cutaway Fits all Big Twin models and bikes with the chain on the left side. 13178 Without taillight mount...............................$75.99 Right Chain Cutaway Fits Sportster models in custom frames and bikes with the chain on the right side. 13179 Without taillight mount...............................$75.99 Note: Always be sure to check for fitment and clearance before painting. Custom Rear Fender for Softail Models A duplicate of the fenders fitted to Heritage Softail models, but is smooth with only fender strut holes in it for custom taillights. It s ready to use as a replacement item or for FX Softail models converting to full fenders. 13211 Fits all Softail models from 84-96 as a custom fender.. $111.99 Note: 97 and newer models require modification and/or relocation of OEM fuse box. Always be sure to check for fitment and clearance before painting. LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS Fat Bob Fender and Taillight Kit for FXR Models Custom Fat Bob styling. 3-piece kit includes Fat Bob fender, Fat Bob taillight and deluxe taillight bracket. Features flush-mount taillight positioning. Bolts easily to all stock fender struts. Compatible with Original Equipment sissy bar kits. 13250 Fits all FXR models from 82-94........................$179.99 Note: Always be sure to check for fitment and clearance before painting. Rear Fender Extension for Softail Models Improves the overall appearance of this area on the bike. It is made in the USA from black, paintable high-impact A.B.S. plastic, and when painted to match the fender and properly installed, this fender extension gives the appearance of the fuller and rounder long fenders used on rigid framed Big Twins. 13228 Fits all 5-speed Softail models from 86-99............ $49.99 Note: It will be necessary to drill mounting holes and circuit breaker clip holes for installation. Always be sure to check for fitment and clearance before painting. TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Rear Fender for FXR Models Stock replacement rear fender for FXR models from 82-99 (except FXRT models). Unpainted steel. 240425 Replaces OEM 59634-81A.......... $74.99 Note: Always be sure to check for fitment and clearance before painting. Custom Rear Fenders for Softail Models Early-style reveal stamped in the rear tips. Installation requires the removal of 5" from the struts. Two decorative end caps are supplied to finish off the shortened struts. Fit all 5-speed Softail models from 86-99. 13254 With no taillight mount........................... $110.99 Note: 97-10 models require modification and/or relocation of OEM fuse box. The stock turn signals must be relocated, and the saddlebags on FLSTC models cannot be reinstalled due to the shortened fender struts. Always be sure to check for fitment and clearance before painting. INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.13
Hinged Rear Fenders for FL Swingarms These two-piece hinged fenders fit all 4-speed Big Twin FL frames from 58-84. They also fit FX models if FL struts are used and can be adapted to FXWGs. A slight dent must be made in the front right lower corner of the fender to clear the FXE battery box. Unpainted steel. 13186 With no taillight mount (repl. OEM 59604-65A).........$116.99 Note: Always be sure to check for fitment and clearance before painting. 13187 13191 One-Piece Rear Fenders for FL Models Accurate reproductions of the one-piece rear fenders on 4-speed FL models from 80-84. One version is smooth with no taillight or turn signal mounts, and the other has the 73-98 taillight mount (but no turn signal mounts). Fender strut mounting holes are already drilled. 13189 With no taillight or turn signal mounts................$117.99 13212 With 73-98 taillight mount but no indentations for the turn signal mounting bar.................................$123.99 Note: Always be sure to check for fitment and clearance before painting. 26524 25933 25932 25931 Rear Fenders for FX Models Detailed reproductions of the Original Equipment 4-speed FX rear fenders from 73-85. Available with or without mounting bracket for 73-98 taillight assembly. 25931 Original style with light mount.........................$69.99 25932 Original style without mount..........................$68.99 25933 Custom bobbed, overall length 41.5...................$76.99 Note: Taillight, visor and license mounting bracket are not included and are shown for illustration purposes only. Always be sure to check for fitment and clearance before painting. Rigid Rear Fender for Big Twin Models An accurate reproduction of the rigid mounted rear fenders used on 36-57 models. Fenders come unpainted and with brackets ready to bolt-on. 13187 Fits 36-48 Big Twin models repl. OEM 59604-39.........$176.99 13191 Fits 37-46 45 models.................................$169.99 26524 Fits 49-57 Big Twin models repl. OEM 59612-41.........$9.99 Note: Always be sure to check fitment and clearance before painting.. *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS 13530 FOOT Wide Fenders for Rigid Frames Custom flat fenders made of heavy-duty -gauge steel in wide widths. 95073 7 1/2"-wide...........................................$29.99 95074 8 1/2"-wide...........................................$35.99 95075 9"-wide..............................................$38.99 Note: Always be sure to check fitment and clearance before painting. 13531 HAND LIGHTING ELECTRICAL 12459 EXHAUST 12457 Universal Steel Rear Fenders Available in 5" or 6" widths. Great for trailers too. 12457 5" wide..............................................$29.99 12459 6" wide..............................................$42.99 Note: Always be sure to check fitment and clearance before painting. OneTonHo and TwoTonHo Custom Rear Fenders Designed specifically for wide rigid frames. Fenders feature internal wiring loom and a belt cutout. The TwoTonHo has built-in fender supports pre-drilled for turn signals while the OneTonHo has no supports. 13520 7 1/2"-wide OneTonHo........................... $139.99 13526 8 1/2"-wide OneTonHo........................... $139.99 13530 9"-wide TwoTonHo.............................. $9.99 13531 9"-wide OneTonHo.............................. $139.99 For Santee 200-Series Rigid Frames 08680 9"-wide custom OneTonHo....................... $9.99 Note: Always be sure to check fitment and clearance before painting. INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE Two Eight WHEELS TIRES & BRAKES CHASSIS 13377 SHEETMETAL Ultra-Wide Custom Fenders Made of 18-gauge steel, these 10 1/2"-wide fenders fit Avon 230-250 series tires. Undrilled for custom applications. 16951 10.5 - wide Two Eight..............................$9.99 Note: Always be sure to check fitment and clearance before painting. Custom Rear Fenders for Santee Rigid Frames Plain steel straps support the rear fender on your wide-tired Santee-framed chopper. For Santee 180-Series Rigid Frames 13377 8 1/2"-wide rear fender with plain steel strap supports................................................. $139.99 16955 8 1/2"-wide without support....................... $9.99 For Santee 200-Series Rigid Frames 16956 9"-wide without support.......................... $9.99 Note: Always be sure to check fitment and clearance before painting. INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.15
Universal Fender Strut Kit by TC Bros Universal fender strut kit for choppers and bobbers. Kit includes: 4 CNC machined steel bungs with 3/8-16 threaded hole and two 12 long 1/2 diameter steel rods. Everything is made from 1018 mild steel for easy welding! 660915 Fender strut kit.......................................$29.99 Threaded Bungs by TC Bros These bungs can be used to mount fenders, tanks, and virtually anything that you want to bolt to your frame. CNC machined from from 3/4 OD 1018 cold rolled steel. 5/16-18 threaded hole, 1.75 overall length. Includes bolts and rubber washers to protect your paint. Sold in quantities of 4. 6609 Threaded bungs......................................$19.99 K&N Reinforced Rubber Fender Washers 1"-diameter round rubber washers have dozens of uses, in addition to the obvious. Allows clean scratch-free, well-cushioned installations. Card of 12 packs of 10. 22170 Fender washers, price per pack of 10....................$6.58 Universal Mounting Bracket/Gusset by Vulcan Engineering Milled from 1018 CF Steel, Not stamped! 3/16 Thick with a 3/8 hole. Perfect for mounting custom exhaust or as a brake anchor mount or any other applications you can come up with. Made in the USA. Sold each. 668256 Universal bracket/gusset (3/16 thick w/ a 3/8 hole)......$8.99.16 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL 26517 SEATS & BAGS 26518 FOOT 26522 Chrome Fender Strut Sets Chrome rear fender struts for 4-speed Big Twin, Sportster and K models from 54-86. All sets are formed from high-grade steel and pre-drilled with the correct mounting holes before polishing and plating. Can be used to mount custom, reproduction or Original Equipment fenders. 26517 Fit FX models from 72-85 2 holes (not countersunk)....$79.99 26518 Fit FL models from 58-84...............................$79.99 78315 Fit FL models from 58-84 (turn signal holes have been removed)............................................$69.99 78319 Fit FXWG from 80-86 (turn signal holes have been removed).....................................................$73.99 26522 Fit Sportster and K models from 54-78 (turn signal holes have been removed).......................................$79.99 Note: Hardware is not included. Chrome Fender Struts for Sportster Models Chrome-plated die-cast aluminum replacements for the Original Equipment parts. Fit 4-speed Sportster models from 82-89 (replaces OEMs 59950-81 and 59951-81). Sold in sets 78055 Fits 82-89 XL models............................... $84.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE Chrome Fender Struts for Softail Models These stock replacement struts fit all FL Softail models from 86-99. Replaces OEMs 59964-86 and 59969-86. Sold in sets 78303 Softail Fender Struts................................ $85.99 ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Billet Machine Gun Fender Struts by Vulcan Engineering Here is a cool set of fender struts to help you mount that rear fender on your latest project. They are CNC-Machined from billet aluminum and then chrome-plated. Fender struts measure 10 5/8 from mounting holes center to center. Sold as a pair 668254 Machine Gun Rigid Fender Struts.....................$129.99 Skull Strut Covers Polished cast aluminum fender strut cover set has handcarved and molded 3D skulls that put a whole new accent on your bike! Fits all Softail models (except Deuce models) from 86-07. Sold in pairs 33155 Skull Strut Covers................................. $169.99 Note: Covers may interfere with saddlebags on some models. SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.17
648026 653125 648025 Big Bags by Arlen Ness Newly redesigned version of their highly popular Big Bags. Makes full use of the saddlebag interior unlike the extension kits which do not add additional interior space. Big Bags accept OEM lids and mounting hardware. Constructed from hi-strength fiberglass. Smooth finish inside and out. We recommend using the Bagger-Tail fender kit (CCI #648026) when installing Arlen s Big Bags. Sold in pairs with no lids or hardware. 648025 Fits all FLT models 93-13............................ $1,299.99 Note: Please check fit and finish prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs.rear Fender Kits for Touring Models FLH/FLT Rear Fender Kits New Bagger-Tail fenders from Arlen Ness are a direct replacement for the OEM fender on 02-08 Touring models. Pre-drilled bolt-on fenders give your bike a clean unique look while filling in the gap between the fender and saddlebags. Fenders can be used with either a stock width rear tire or up to a 200mm rear tire. Supplied with a Ness/RWD license/taillight assembly with turn signals that plug into the factory harness. We recommend using the Bagger-Tail fender kit with either the Ness saddlebag extension (CC part #05800) or with Arlen s Big Bags and using the Duck-Tail fender kit with stock saddlebags. Note: Please check fit and finish prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs. 648026 Bagger-Tail fender kit, 97-08..........................$799.99 653125 Bagger-Tail FLT fender kit, 09- FLT...................$799.99 Note: Please check fit and finish prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs..18 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
603080 APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER 670675 BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST. Silhouette INTAKE ENGINE Bare Bones Solo Sorrento Villian GASKETS TRANSMISSION & CLUTCH PYO/Bagger Nation Custom Stretched Gas Tank for Touring Models Paul has created what he feels is the finest stretched tank design available. Flowing and elegant lines that perfectly compliment the stance of your Bagger. This tank is a 6 gallon one-piece stretched unit and if the tank wasn t enough Paul also designed a custom steel dash with a cool pop-up gas cap for this tank. Tank kits include a 6 gal. tank, custom low-profile steel dash, rubber trim and any necessary mounting brackets. Available for 03-Up FLHT/FLTR models. ( Stock seat may need to be modified or custom seat has to be made ) 603080 PYO/Bagger Nation stretched gas tank for 08- FLHT/FLTR models............................................................... $769.99 603081 PYO/Bagger Nation stretched gas tank for 03-07 FLHT/FLTR models............................................................... $769.99 Replacement Parts 603082 PYO/Bagger Nation replacement stretched dash for 08- FLHT/FLTR models....................................................... $99.99 603083 PYO/Bagger Nation replacement stretched dash for 03-07 FLHT/FLTR models....................................................... $99.99 603084 Replacement pop-up gas cap.................................................................................................. $35.99 603074 Replacement rubber gasket for 603084.......................................................................................... $3.99 603077 Replacement hardware kit for 603080........................................................................................... $4.99 603078 Replacement hardware kit (excluding filler neck) for 603081.................................................................... $.99 603079 Replacement filler neck for 603081............................................................................................. $39.99 Optional Le Pera Seats These seats were designed by Le Pera to be used exclusively with the PYO/Bagger Nation Stretched Gas Tanks For 08- FLHT/FLTR models 643222 Silhouette seat for use with CCI part #603080 on all 08-Up FLHT/FLTR models..................................................... $386.99 643223 Bare Bones Solo seat for use with CCI part #603080 on all 08-Up FLHT/FLTR models................................................ $301.99 643226 Sorrento 2-up seat for use with CCI part #603080 on all 08-Up FLHT/FLTR models.................................................. $596.99 643227 Villain seat for use with CCI part #603080 on all 08-Up FLHT/FLTR models......................................................... $596.99 For 02-07 FLHT/FLTR models 643224 Silhouette seat for use with CCI part #603081 on all 02-07 FLHT/FLTR models...................................................... $386.99 643225 Bare Bones Solo seat for use with CCI part #603081 on all 02-07 FLHT/FLTR models................................................. $288.99 DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.19
601298 601297 7 Gallon Stretched Tank for Touring Models These new custom 7 gal stretched tanks bolt to the frame via stock mountings, the one piece steel construction has a curved bottom design to add that great custom look. They measure approximately 18 wide x 25 long and require a custom seat to be fitted. EFI version tanks come with a custom dash with hidden filler opening & accepts the stock OEM fuel-pumps. Carbureted version (not shown) comes with a center screw in type bung, gas cap sold separately. Hardware & rear mounting brackets included. 629390 Stretched 7 gallon tank, no dash, screw bung fits carbureted Touring models 96-06................................$519.99 629391 Stretched 7 gallon tank, raw dash fits EFI Touring models 03-07....................................................$629.99 629392 Stretched 7 gallon tank, raw dash fits EFI Touring models 08-....................................................$629.99 629393 Chrome dash for EFI Touring tank.....................$129.99 Custom One-Piece Stretched Tanks for Twin Cam Softail Models These tanks are stretched 2" and have all the tabs to mount your stock dash. They accept late model screw-in gas caps and also have provisions for the stock fuel gauge. They re available for both fuel injected and carbureted models. 601297 Fits carbureted Softail models from 00-03, 5 gallons.... $439.99 601298 Fits fuel injected Softail models 00-05 (except Deuce models, 04-06 carbureted models)................................$469.99 Note: All fuel tanks should be test fitted and pressure tested before painting. Installation of this tank may require a custom seat due to their longer lengths. ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER 670675 BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST..20 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
Caps and Dash not included APPAREL SEATS & BAGS FOOT HAND 1982-1996 Screw-In Stretched Flatside Fat Bob Tanks for Softail Models Stretched tanks are one of the hottest custom bike trends. We start with our best selling 5 gallon tanks and weld on custom formed steel extensions. The extensions add over two inches to the length of the tank and create a smooth flowing look by filling the void between the seat and where the tank normally ends. Manufactured of heavy gauge steel on new tooling, each tank is hand inspected and pressure tested to ensure quality and a perfect fit. Designed for use with a stock dash, tank panel, late model (13/16" thread) petcock and most standard width seats. Available with bungs for 82-95 screw-in gas caps. Fit Softail models from 84-99 and most frames with mounts for flatside tanks. Gas caps must be purchased separately. 46188 5 gallon Screw-in style cap, stretched tank.............$251.99 Note: Stretched portion of tank does not hold fuel. Some wide or touring seats may require modification. All fuel tanks must be test fitted, pressure tested, and pre-sealed before painting. Tanks shown painted for illustration purpose only, tanks require finish body work. 15676 Custom One-Piece Smooth-Top Stretched Tanks for Softail Models Our 2" stretch tanks are new stampings rather than using welded tips to achieve stretch. They come with single flush-mount locking gas caps (included), or for stock-style screw-in gas caps (not included). Single cap tanks have inlet offset to the right side. For the extreme custom Softail models, the 4" stretch tanks have welded wings on the 2" stretch tanks for the ultimate long, low look. Bike builders should note that these tanks, while simply bolting on stock tank mounts on the frame, will require minor finishing (especially with welded tip extensions), and probably a custom seat to fit the rear contours of the extended tank. Fit models from 84-99. 4.2 gallon capacity. 15286 2" stretch with single flush locking cap............. $319.99 15676 4" stretch for single screw-in cap (cap not included).. $424.99 15687 4" stretch with single flush locking cap............. $429.99 One-Piece Tank Hardware Kit Softail Models 610003 Works with all tanks listed above.................... $29.99 LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS One-Piece Stretched Gas Tanks for Softail Models Smooth top gas tanks come with a single center-mounted aircraftstyle gas cap, and are stretched to 2". Made of heavy-gauge steel and inspected and pressure-tested to ensure quality as well as a perfect fit. Replacement bolt-in aircraft-style gas cap available. 15787 2" stretched, fits all Softail models from 84-99, holds 4.2 gallons........................................... $389.99 Note: This gas tank requires modifications on the seat or a custom seat due to the longer length. SHEETMETAL INSTRUMENTS & GAUGES GENERAL Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust. CROSS REFERENCE www.customchrome.com.21
3.5 Gallon Hand Shift Gas Tanks Two versions of the obsolete hand shift style 3.5 gallon gas tank sets. Accurate placement of the shifter gate lugs and shut-off rod hole centers ensures troublefree service. Available in two versions. One is a totally accurate reproduction of the original, rod-style gas shut-off equipped tank used from 48-65. The other is based on the same tank, but eliminates the early style gas shut-off rod system and replaces it with the tank bottom fitting for the late 13/16" external-thread petcock. Both tanks accept the correct cam-style gas caps and are designed to accept the stock shifter guide. (Sold separately.) 25568 Original style with rod shut-off (shown)...............................$219.99 25569 Updated style for 75-07 petcock......................................$219.99 15602 Flatside Gas Tanks with Screw-Type Gas Caps Designed to accept 82-95 screw in caps. Each tank is formed on all-new tooling to ensure quality. Tanks are designed to work with stock and most aftermarket frames with flatside brackets and single large diameter instruments, dashes, trim panels and 13/16" petcocks. Fit Softail models from 84-99 and most aftermarket frames with mounts for flatside tanks. Gas caps must be purchased separately. 15298 5 gallon.............................................$205.99 15294 6 gallon.............................................$184.99 Note: Due to the slightly different contour of the 6-gallon tanks, flexible steel, leather or plastic tank panels should be used. All fuel tanks must be test fitted, pressure tested, and pre-sealed before painting. Tanks shown painted for illustration purpose only, tanks require finish body work. ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER 670675 BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST. 15296 Fat Bob Gas Tanks Tanks are designed with accurate, precision-placed mounting plates and stud bosses. For increased durability, low-temperature welding is used throughout the tank. Accepts either the dash for Low Rider models or the Fat Bob dash for FL and FXWG models. Features late 13/16" external-thread fuel valve connections for Original Equipment style gas valves (CC # s 25245, 25243) or high volume versions. Available to accept either pre-1982 cam-style gas caps or later model screw-in style gas caps. They are shipped with a dash spacer kit to accommodate the increased height. Fit all Original Equipment and aftermarket 4-speed Big Twin frames thru 84 (except FXST models). Tanks with Cam-Style Bungs 15289 3.5 gallon...........................................$9.99 25549 5.0 gallon...........................................$9.99 Tanks with Screw-Style Bungs 15295 3.5 gallon...........................................$9.99 15296 5.0 gallon...........................................$176.99 15602 6.0 gallon...........................................$217.99 Gas Tank Accessories 25548 Rubber grommet with a steel insert for use in mounting Fat Bob tanks. Helps to isolate the tanks from vibration. Pack of 10 (repl. OEM 111)......................................$0.65 Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust..22 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS FOOT HAND LIGHTING Custom Smooth-Top Gas Tanks for FXR Models Our 2" stretch tanks are new stampings rather than using welded tips to achieve stretch. They come with flush-mount locking gas cap (included). Single cap tanks have inlet offset to the right side. Tanks fit all models from 82-99 and have a 4.0 gallon capacity. Models with stock turn signals mounted to the top triple tree must relocate them to avoid contact with the tank. 15696 2" stretch with single flush locking cap............. $381.99 ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES Fat Bob Gas Tank for FXR Models Classic Fat Bob look for all FXR models from 82-99. It has the appearance of split tanks, but is really a one piece welded tank with twin screw type filler necks, and 13/16" external thread gas valve fitting. Bolts directly to the stock mounts and accepts all FL-style dash assemblies (except Cateye) when the appropriate dash base is used. Included with each tank is a CC #19095 superflex speedo cable and a chrome tank divider panel. The tanks are even equipped with internal emission control system connections, for use on vehicles WITH fuel tank emission devices (i.e., California models). 25551 4-gallon Fat Bob gas tank for FXR models........... $261.99 Note: CC #25551 tanks require removal of solder from vent tube prior to installation on vehicle when connecting fuel tank emissions control devices. CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust. CROSS REFERENCE www.customchrome.com.23
19639 629440 629442 650246 King Tanks for Early Sportster Models 2"-wider than the Standard tank... enough to give extra mileage and just wide enough to make them look great. These high tunnel tanks are equipped with stock mounts but do not include mounting hardware. They have a 3.1 gallon capacity. 3/8" NPT Fuel Inlet. 19639 Fits all models from 55-78................ $132.99 25574 Fits all models from 79-81................ $119.99 650246 Fits all models from 82-92................ $119.99 EFI Tanks for Late Sportsters Whether you need to replace a damaged tank or just want to add some style to your ride, we have the tank for you. These tanks accept the stock fuel pump and come with or without indents and are available with OEM style screw in caps (sold separately) or our raised custom cap (included). 629440 EFI 3.3 gal OEM style tank, screw bung for 07- XL models......$219.99 629441 EFI 3.3 gal OEM style tank, custom cap for 07- XL models..... $239.99 629442 EFI indented 3.3 gal OEM style tank, screw bung for 07- XL models........................................................... $255.99 629443 EFI indented 3.3 gal OEM style tank, custom cap for 07- XL models............................................................$287.99 641908 Replacement custom gas cap.................................. $19.99 15670 Stretched One-Piece Fat Bob Gas Tanks for Sportster Models Features a 2"-stretch 3.5 gallon capacity Available in smooth-top versions ONLY Single or dual screw-in caps (not included) Single or dual flush aircraft-style caps with locks are included Smooth-Top for Late Models Fit all Sportster models from 82-03 (except XL1200S models). 15670 With dual screw-in bungs................ $349.99 15673 With a single screw-in bung.............. $349.99 15218 With dual flush locking caps............. $369.99 15219 With a single flush locking cap........... $369.99 Stretched 4 Gallon Tank for Late Sportsters If you are looking for more range or just want to set your Sporty apart from all the others this is the tank for you. Accepts the stock fuel pump, available with or without indents. Some seats may require slight modification (stock solo seat works). 629444 Stretched 4 gal tank, screw bung fits XL models 07-Up.............. $389.99 629446 Stretched 4 gal tank, screw bung, indented fits XL models 07-..... $399.99 Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust..24 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS Custom Chrome Custom Low Tunnel Gas Tank This 2.8 gallon custom tank features a 1 1/2"-high tunnel with universal style mounts for custom applications. Accepts 3/8" NPT threaded petcock. Tank measures 15 1/2"-long x 9"-wide x 7"-high with a 1 1/2" tunnel. 260121 Unpainted steel (Bajonett)............................$99.99 Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. Peanut Tank for Sportster Models A quality reproduction of the Original Equipment 2.4 gallon gas tank. 12724 Fits early Sportster and K models from 55-78........ $89.99 Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. FOOT HAND LIGHTING ELECTRICAL EXHAUST 632933 INTAKE 651261 Smooth-Bottom Tanks for Sportster Models An updated design with a 3.3 gallon capacity and rounded lower edges. Very similar to the latest factory design, but with petcock locations and mounts for early or late frames. Includes mounting hardware. 15664 Fits Sportster models from 82-94................... $192.99 ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE XL Flat Bottom Standard & King Sportster Tanks by Paughco Traditional Sportster Standard & King tanks. but modified for universal applications with horseshoe front mounts and tab rear mounts. They are equipped with a bung to accept late model 22mm petcocks and screw-in style gas caps. Made in the USA. 632933 XL Flat Bottom Gas Tank. 2.9 gals......................$212.99 6548 XL 95-03 Flat Bottom King Tank 2.9 gallon.............$209.99 6549 XL 04-06 Flat Bottom King Tank 2.9 gallon.............$249.99 651261 XL Flat Bottom Gas Standard Tank. 2.2-gallon..........$199.99 ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER 670675 BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST. Rubber Mounted 'King' Tanks for Sportster Models Classic good looks of the original Peanut tank, but with increased capacity for an extended cruising range. We took our best-selling 3.25-gallon capacity King tank and added rubber mounts to the front and rear. By isolating the tank, we ve reduced stress on the tank mounts for increased durability. Require vented screw-type gas caps. 25573 Fits Sportster models from 82-94.....................$9.99 Note: Fuel inlet is located on left. WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.25
600154 Detail of Gas Cap 600155 Custom Stretched Gas Tank Uniquely-styled tank provides an affordable option in defining your ultimate hand-built custom chopper. Features a long, tapered shape with a raised custom fuel bung. Includes two different caps; 5-bullet style and smooth. Shipped with custom mounting brackets to weld to the frame. Fuel capacity is approximately 3.5 gallons. Tank measurements: Length - 23, Width - 12, Height - 8.5, Tunnel length 21 7/8 88120 Fits most aftermarket frames with a minimum of a 3" stretch in the backbone and a 4" stretch in the front downtubes (frame backbone diameters cannot exceed 2")................$299.99 689990 Replacement 5 bullet pop-up gas cap...................$49.99 689991 Replacement smooth pop-up gas cap...................$49.99 600157 Custom Bobber Style Gas Tanks by Cole Foster An absolutely beautiful new tank designed with the keen styling of Cole Foster - Salinas Boyz Customs. The tanks feature a mini pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted to any custom application. They use the existing stock rubber mounts or are included as needed. Fuel capacity is 2.35 gallons. 600155 Fits Evolution Softail models from 84-99 and 4-speed FX and FL models and custom applications.......................$260.99 Note: These applications require the front frame dash mount to be cut off and rear screw hole modified. 600157 Fits carburated Twin Cam 88 Softail models from 00-06.....$260.99 600154 Fits Sportster models from 82-03......................$260.99 Replacement Gas Caps 47775 Stainless Steel........................................$42.99 47777 Chrome.............................................$42.99 Fuel Tank Liner Kit Northern Fuel Tank Liner is easy to use and effective. It internally seals the multitude of small leaks that often form due to age and rust. It is designed to seal new or existing fuel tanks with minor leaks. The coating is very flexible and does not crack. This gives the repair a much longer life. The polymer was specifically chosen because of its tight adhering qualities. Northern Fuel Tank Liner is resistant to methanol, alcohol and other fuel additives. Northern Fuel Tank Liner levels out to the surface uniformly. You will not get a wide variation in thickness as with some other coatings. Northern Fuel Tank Liner is thicker and usually requires only one coat. Holes up to 1/32nd may be coated and sealed safely. Rust is sealed in so that it cannot flake off. 670675 Fuel tank liner kit..................................... $39.99 670676 Fuel tank liner pint.................................... $22.99 670677 Fuel tank cleaner pint.................................. $8.99 670678 Fuel tank prep pint.................................... $16.99.26 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS 651260 FOOT HAND LIGHTING 6545 ELECTRICAL EXHAUST 651259 INTAKE ENGINE 670800 GASKETS Indian Larry Dished Tanks The same tanks used on the Indian Larry bike in the build-off series. Old School looks with modern production techniques bring you the cool style you want at an affordable price. Easy mounting by drilling of the backbone and can be adapted to many styles of stock and custom frames. Uses cam lock gas cap (not included). 22mm Fuel Inlet. 670800 3.0 Gallon.......................................... $369.99 670801 3.5 Gallon.......................................... $369.99 651259 4.5 Gallon.......................................... $363.99 651260 5.0 Gallon.......................................... $363.99 Indian Larry Dished Tank for Sportsters We ve taken one of the coolest tanks in our line, added the correct mounts and made it a bolt on application to transform the looks of your Sportster! Accepts the stock EFI fuel pump and mounts to the stock tank mounting points. 6545 Dished tank 3.5 gallon for 07- XL models......... $424.99 6546 Dished tank 4.5 gallon for 07-13 XL models......... $424.99 6547 Dished tank 5 gallon for 07- XL models........... $424.99 TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER 670675 BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST. INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.27
675705 601800 675701 601803 Stretched Super Cruiser Steel Gas Tanks for Custom Applications Made of heavy-gauge steel for maximum strength and durability. Designed to use pop-up caps or bolt-in cap kits. Tank must be fitted to frame before painting. Available in a 3.5 gallon with 2" or 5" stretch. 601800 3.5 gal. tank with 2" stretch made for pop-up cap, L- 23.5, W- 13.5, H - 9.........................................$269.99 601801 3.5 gal. tank with 2" stretch made for bolt-in cap, L- 23.5, W- 13.5, H - 9.........................................$264.99 601802 3.5 gal. tank with 5" stretch made for pop-up cap, L- 25.25, W-, H - 8.......................................$275.99 601803 3.5 gal. tank with 5" stretch made for bolt-in cap, L- 25.25, W-, H - 8...........................................$269.99 Custom Pop-Up Gas Caps 47775 Stainless Steel........................................$42.99 47777 Chrome.............................................$42.99 Aircraft-Style Bolt-In Gas Caps Comes with mounting ring, gasket, screws and cap. 08661 Locking vented cap kit................................$42.99 08660 Non-locking vented cap kit............................$39.99 675704 Pro Image I & II Chopper Gas Tanks The latest and greatest one-piece chopper gas tanks available! Fabricated from heavy-gauge steel with 4.1 or 4.7 gallon capacities. Compliments chopper frames with 4" downtube stretch and 3" backbone stretch. Backbone outer diameter cannot exceed 1 3/4". Available with flush or raised cap. Includes rubber mounted weldon brackets. Pro Image I Chopper Gas Tanks 675701 4.7 gallon with flush cap, L - 23.5, W - 13............$399.99 Pro Image II Chopper Gas Tanks 675704 4.1 gallon with flush cap, L - 23.5, W - 12, H - 10.....$399.99 675705 4.7 gallon with raised cap.............................$399.99 Special Flush Mount Pop Up Gas Cap 675706 Fits CCI 675701, 675704, and 675705....................$54.99 651285 Custom Narrow Axed style Gas Tank by Paughco This tank features a low tunnel with straight mounting tabs on both the front and rear, single early cam style gas cap with dual threaded 1/4 fuel outlets. Made in the USA. 651285 2.2 gallon Axed Harley-Style Custom tank with single gas cap....................................................$189.99 ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER 670675 BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST..28 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE 632930 632931 ENGINE Mini Mustang Gas Tanks by Paughco These small gas tanks look awesome! Great lines, and only 16 1/2 long, 9 wide and 7 deep. For custom applications with 2 mounting styles available. The Narrow Mini Mustang tank has a capacity of 2.4 gals., with tunnel measuring 2 1/4 wide x 2 1/2 deep and front/rear mount tabs. Total length tab center to tab center is 17. The Frisco Mini Mustang tank has a capacity of 2.2 gals. and features a Frisco style front mount. Tunnel measures 3 wide x 1 1/2 deep, and total length tab center to tab center is 15 1/2. Both tanks have 2, 1/4 NPT petcock outlets; petcocks sold separately. Made in Nevada, USA by the crew at Paughco. 632930 Mini Mustang Gas Tank. Narrow. 2.4 gals............ $194.99 632931 Mini Mustang Gas Tank. Frisco. 2.2 gals............. $204.99 632252 1/4 NPT Petcock. No reserve.......................... $38.99 632253 1/4 NPT Petcock. With reserve........................ $56.99 GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS 3.3 Gallon Mustang Tank This one piece tank is perfect for a variety of custom applications. It has rounded mounting plates front and rear that are welded in place. It features a twin cap look, but the left neck is non-functional, for appearance only. The 3.3 gallon capacity tank fills on the rightside only. Tunnel measures 2 1/2"-high x 2 3/4"-wide. Tank measures 18 1/2"-long x 12"-wide. 2603 Unpainted steel, 3.3 Mustang Tank....................$103.99 Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. Mustang Gas Tank with Pop-Up Cap Comes with a center-mounted single pop-up gas cap and has a capacity of 3.3 gallons. Tank measures 16 1/2"-long x 11"-wide at widest point. Total length from tip-to-tip of mounting brackets is approximately 20". Tunnel is approximately 2 3/4"-wide x 2 1/2"-deep. Features a 3/8" NPT gas outlet (use CC # s 12726 or 12727 petcocks) on the center of the bottom right side as well as two 1/4" gas outlets (use CC # s 632252 or 632253 petcocks) on both sides near the rear of the tank to be used as a crossover line or, for multiple choices in routing your gas lines. Petcocks sold separately. 632165 Mustang tank with pop-up cap.................... $169.99 Special Flush Mount Pop Up Gas Cap 675706 Fits CCI 675701, 675704, and 675705................. $54.99 Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.29
651251 Mustang and Axed Harley-Style Custom Gas Tanks by Paughco Available in two popular styles that will bolt right to the stock frame mounts on 57-03 Sportsters and have an early cam-style gas cap bung. Made in the USA. Fits Sportster Models from 82-94; with a 22mm threaded fuel bung on the right-side of the tank 651251 4.2-gallon Axed Style Custom tank with single gas cap for 82-94 XL................................. $199.99 651252 3-gallon Mustang Style tank with single gas cap for 82-94 XL.................................... $199.99 Fits Sportster Models from 95-03; with a 22mm threaded fuel bung on the left-side of the tank 651253 4.2-gallon Axed Style Custom tank with single gas cap for 95-03 XL................................. $199.99 651254 3-gallon Mustang Style tank with single gas cap for 95-03 XL.................................... $199.99 651252 ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER 670675 BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST. 632251 651241 Narrow Mustang Style Tank This sleek looking gas tank features dual bung type caps, holds 2.2 gallons of gas and measures 16 1/2 long, 9 wide and 7 deep. Tunnel is 2 1/2 wide x 2 1/4 deep. Center line hole-to-hole on mounting tabs is 17 1/2. Tank has two 1/4 gas outlets (use our #632252 or 632253 petcocks). This is a sweet looking tank and goes great with narrow springers or our girder set-up. Gas caps and petcocks not included. Made in USA by Paughco. 632251 2.2 gal dual cap narrow mustang type tank............$205.99 651241 2.2 gal single cap narrow mustang tank................$189.99 Wasp Custom Chopper Gas Tank Building a trick chopper but haven t found the prefect tank for it yet? Look no further! This 2.2 gallon tank with it s tear drop shape is perfect for any retro scoot. Available with one or two cam style bungs, TIG welded with the petcock bung on the right side. 651017 Wasp chopper tank..................................$3.99 651018 Wasp chopper tank dual cap..........................$9.99.30 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS FOOT Universal Tank Mounting Kit for Builders Building your own tank you say, well how are you going to mount it? This complete set of tank mounts comes with not only the straps and rubber mounting parts to go on the frame, but also the machined blocks that are welded into the fuel tank for them to bolt to. 699985 Universal Tank Mounting Kit..........................$72.99 Universal Fat Bob Gas Tank Quickmount Kit A precise and effortless way to mount Original Equipment or aftermarket Fat Bob tanks to custom or Original Equipment frames that have had the gas tank brackets removed. It permits the builder to temporarily attach the one-piece bracket for a quick visual check of tank placement on custom applications, and once a tank position is selected, the entire bracket assembly may be welded in place for a stronger-than-stock, precision system of support. 25048 Universal Fat Bob Gas Tank Quickmount Kit................................... $47.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE Custom Hardware Kit for Flatside Tanks Chrome-plated beveled washers and countersunk mounting screws provide a custom look. They replace the cad-plated Original Equipment screws and washers. 25590 Fits all Softail models from 91-99............................$15.99 Mounting Kit for Fat Bob Tanks Hardware kit includes bolts, nuts, washers and spacers for mounting Fat Bob tanks on 4-speed style Big Twin frames through 84 and most customs. 260113 Mounting Kit for Fat Bob Tanks.......................... $6.99 ENGINE GASKETS Universal Tank Mount by Vulcan Engineering Milled from 1018 CF Steel, Not stamped! 1/4 Thick with mounting holes for use with standard rubber tank mounts. Perfect for mounting custom gas tanks or any other applications you can come up with. Made in the USA. Sold each. 668257 Universal tank mount........$10.99 TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES Rubber Mounts for Flatside Gas Tanks Accurate reproductions of the Original Equipment parts used to mount flatside gas tanks to 4-speed FX models 85-86, and Softail models from 84-99. Pack of 6. Replaces OEMs 147, 5775. 25577 Flatside Rubber Mounts, price each.............................$2.50 Mounting Kit for Fat Bob Tanks A must when installing CC or Original Equipment Fat Bob tanks on 4-speed frames through 84. Special washers in kit prevent possible thread damage to rear mounting holes and keep tanks from resting against heads. 26446 Mounting Kit for Fat Bob Tanks.............................$9.99 Another must for installing Fat Bob tanks. One of our mechanics came up with this little item. It s actually the chain guard mounting grommet, but it works great in the front Fat Bob tank mount holes to isolate the tanks from vibration. 25548 Rubber grommet with a steel insert for use in mounting Fat Bob tanks. Helps to isolate the tanks from vibration. Pack of 10 (repl. OEM 111).......................$0.65 Custom Mounting Kit for Flatside Tanks A complete kit that can be used to update your existing flatside tank mounts, or used on newly-constructed bikes instead of purchasing Original Equipment parts. The beveled washers and countersunk mounting screws are chrome-plated, and provide a custom look. 25550 Fits 84 Softail models, and all models with split tanks from 85-99.................... $49.99 CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.31
Flush Mount Pop-up Caps for Sportsters These are the sleekest gas caps around! The flawless pop-up mechanism is easy to handle and the added trim ring provides paint protection and great looks. Sold each. Will not fit 04-10 XL1200C. Caps for 98up XL with 3.3 Gal tanks 688662 Flush mount cap 3.3 gal, chrome.......... $70.99 688663 Flush mount cap 3.3 gal, black............ $70.99 Caps for 98up XL with 2.1 and 4.5 Gal tanks 688664 Flush mount cap 2.1 & 4.5 gal, chrome..... $70.99 688665 Flush mount cap 2.1 & 4.5 gal, black....... $70.99 688663 600247 600244 651859 651858 600240 600241 15850 15851 Low Profile Stainless Steel Gas Cap Sets These polished gas caps feature an extremely low-profile with either a peaked or domed top design. They fit all models with screw-type gas tanks from late 96-Up. Sold in matched sets with left and right hand threads. 15850 Peaked set....................................................... $47.99 651858 Black, Peaked set................................................. $47.99 15851 Domed set....................................................... $47.99 651859 Black, Domed set................................................. $47.99 Renegade Bandit Stainless Steel Gas Cap Sets with Paint Protectors by Landmark Never chip or scratch your paint again. Durable alloy paint protector screws into the stock filler neck offering a permanent air tight seal. The polished stainless gas cap threads into the protector. Fit all models with screw-top tanks. For Models from L96- Bandit Price Renegade Price 16502 $119.99 16504 $119.99 Matched cap set with left and right-hand threads 16503 $59.99 16505 $59.99 Single vented gas cap Note: In mid-96 the OEM tank design changed. The gas tank bung on these later models DOES NOT have any welding bead above the sheet metal surface of the tank. For Models from 82-E96 Bandit Price Renegade Price 16491 $119.99 16493 $119.99 Matched cap set with left and right-hand threads 16492 $59.99 16494 $59.99 Single vented cap Screw-In Style Pop-Up Gas Caps Give your gas tank a custom look without having to cut, weld or re-paint! These caps simply screw into your existing tank bungs. They fit in nearly flush when closed; opens easily with just a 1/4 turn of the center of the cap. Billet aluminum construction with either a chrome-plated or wrinkle black finish. Available for a wide variety of models & years. Fits 96-Up Models 600240 Pop-Up gas cap set includes one vented & one dummy cap, chrome.................... $59.99 600247 Pop-Up Gas cap set includes one vented & one dummy cap, wrinkle black.............. $59.99 600244 Pop-Up gas cap set includes one vented & one non-vented gas cap, chrome............. $59.99 653087 Pop-Up gas cap set includes one vented & one non-vented gas cap, wrinkle black........ $59.99 600245 Vented Pop-Up gas cap, chrome (sold each)........................................ $30.99 653089 Vented Pop-Up gas cap, wrinkle black (sold each)................................... $29.99 600246 Non-vented Pop-Up gas cap, chrome (sold each)........................................ $30.99 653091 Non-vented Pop-Up gas cap, wrinkle black (sold each)................................... $29.99 Fits 82-95 Models 600241 Pop-Up gas cap set includes one vented & one non-vented gas cap, chrome............. $60.99 653086 Pop-Up gas cap set includes one vented & one non-vented gas cap, wrinkle black........ $59.99 600242 Vented Pop-Up gas cap, chrome (sold each)........................................ $30.99 653088 Vented Pop-Up gas cap, wrinkle black (sold each)................................... $29.99 600243 Non-vented Pop-Up gas cap, chrome (sold each)........................................ $30.99 653090 Non-vented Pop-Up gas cap, wrinkle black (sold each)................................... $29.99 Replacement Parts 603075 Replacement o-ring for Pop-Up gas caps................................................ $2.99.32 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL 688531 688530 Dual Flush Locking Gas Cap Set Dual flush locking gas caps for use with most aftermarket gas tanks that accept flushmounting gas caps. 15639 15639 Replacement dual flush locking caps................. $51.99 SEATS & BAGS FOOT HAND Deluxe Scalloped Gas Caps Chrome deluxe gas caps with scalloped edges. Available vented or non-vented for most Big Twin and Sportster models. Also fits most after-market replacement gas tanks. For 41-73 models 260030 Vented...............................................$15.99 260031 Non-Vented..........................................$15.99 For 82-95 models 688530 Deluxe gas cap set chrome (one vented and one non-vented cap).................................................$38.99 688531 Deluxe vented gas cap chrome.........................$19.99 688532 Deluxe non-vented gas cap chrome.....................$19.99 688536 Deluxe gas cap set black (one vented and one non-vented cap).....................................................$38.99 688537 Deluxe vented gas cap black...........................$19.99 688538 Deluxe non-vented gas cap black.......................$19.99 For 96- models 688533 Deluxe gas cap set chrome (one vented and one non-vented cap).................................................$38.99 688534 Deluxe vented gas cap chrome.........................$19.99 688535 Deluxe non-vented gas cap chrome.....................$19.99 688539 Deluxe gas cap set black (one vented and one non-vented cap).....................................................$38.99 688540 Deluxe vented gas cap black...........................$19.99 688541 Deluxe non-vented gas cap black.......................$19.99 Spinner Style Gas Caps Give your bike a touch of hot rod with these spinner style gas caps. Available in chrome or black finish for most model years. Dummy caps to replace the fuel gauge on 00-Up models are also available. Sold each. Screw in style 96-Up 688298 Spinner cap, 96-Up, vented, chrome................. $49.99 688299 Spinner cap, 96-Up, non-vented, chrome............. $49.99 688302 Spinner cap, 96-Up, vented, black................... $49.99 688303 Spinner cap, 96-Up, non-vented, black............... $49.99 688304 Spinner cap dummy left, 00-Up, chrome............. $49.99 688305 Spinner cap dummy left, 00-Up, black................ $49.99 Screw in style 82-95 688296 Spinner cap, 82-95, vented, chrome.................. $49.99 688297 Spinner cap, 82-95, non-vented, chrome............. $49.99 688300 Spinner cap, 82-95, vented, black.................... $49.99 688301 Spinner cap, 82-95, non-vented, black............... $49.99 Cam style 688292 Spinner cap, cam style, 65-72, vented, chrome........ $49.99 688293 Spinner cap, cam style, 65-72, non-vented, chrome.... $49.99 688294 Spinner cap, cam style, 65-72, vented, black.......... $49.99 688295 Spinner cap, cam style, 65-72, non-vented, black...... $49.99 LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE 260005 WHEELS TIRES & BRAKES 651853 CHASSIS 26580 Steel Gas Caps Perfect mechanical reproductions of the Original Equipment parts. The low-pressure relief vent is properly recessed in the cap to clear the filler neck vent tube. For screw-style tanks from 83-95. Chrome 26580 Set of left and right caps..............................$21.99 26582 Right side cap only (vented)...........................$10.99 26581 Left side cap only (non-vented)........................$11.49 Black 651862 Black set of left and right caps.........................$21.99 651853 Black right side cap only (vented)......................$10.99 651861 Black left side cap only (non-vented)................. $10.99 651863 Early-Style Gas Caps for Late 65-72 Chrome gas caps for Big Twin and Sportster models from 65-72 (except FLT and FXR models). Chrome 260003 Vented Early-Style Gas Cap.......................... $8.99 260005 Gas cap set. Includes one vented and one non-vented $16.99 Black 651863 Black gas cap set. Includes one vented and one non-vented.................................................. $11.99 651864 Black vented....................................... $6.49 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.33
260023 Screw-in Gas Caps with Aircraft Look Now you can enjoy the high-tech aircraft cap look without the hassle of re-working your existing tanks. These screw-in gas caps are chrome plated, solid billet aluminum and have actual countersunk stainless Allen head fasteners around the outside edge. Center lever raises and lowers just like other aircraft caps, except turning it removes the entire cap, not just the center plug. No modification required, fits 83-95 (except FLT and fuel gauge cap). Caps are non-locking. 260023 Gas cap set. Includes one vented and one non-vented....$44.99 260022 Vented (right side, right hand threads)..................$21.99 Skull Locking Gas Caps Black locking gas caps with a chrome skull on the lock cover. Sold with two keys as a set or individually. 688700 Skull locking gas cap vented 82-95......................$24.99 688701 Skull locking gas cap non-vented 82-95.................$24.99 688702 Skull locking gas cap set 82-95.........................$48.99 688703 Skull locking gas cap vented 96-Up.....................$24.99 688704 Skull locking gas cap non-vented 96-Up.................$24.99 688705 Skull locking gas cap set 96-Up.........................$48.99 08661 Original-Style Cam-Style Gas Caps A variety of replacement and custom gas caps. Available vented for single cap gas tanks and the right side of Fat Bob gas tanks, or without a vent for the left side of Fat Bob tanks. They fit Original Equipment and replacement tanks with cam-style bungs. Polished Stainless Steel Late-Style Caps 26574 Plain cap set, includes left and right caps for Fat Bob tanks......................................................$29.99 26570 Vented cap ONLY.....................................$.99 26571 Non-vented cap ONLY................................$.49 Chrome Original-Style Gas Caps 26499 Plain cap set, includes left and right caps for Fat Bob tanks......................................................$11.99 12725 Plain vented cap ONLY.................................$9.99 26021 Plain non-vented cap ONLY............................$7.99 19478 19474 Late-Style 19480 19479 Gas Cap Gaskets Quality replacement rubber gaskets that fit Original Equipment and aftermarket gas caps. Sold in packs of 10. 19474 For threaded style gas caps on all models from 82-06.....$1.60 19478 3.5 or 5.0 gallon 41-82 right side and all 58-82 single tanks......................................................$2.00 19479 3.5 and 5.0 gallon right side tanks from 36-76............$0.45 19480 3.5 and 5.0 gallon left side tanks from 65-82.............$1.00 Aircraft-Style Gas Cap Sets Low profile high-tech gas caps. Designed to be used with aircraft-style custom tanks. Weld-In Cap Kits Kits include weld-in bungs and caps. Locking 08673 Gas cap set, vented and non-vented................ $59.99 Non-Locking 08672 Gas cap set, vented and non-vented................ $59.99 08676 Vented cap kit ONLY.............................. $29.99 Bolt-In Cap Kits Kits include mounting rings, gaskets, screws and caps. Locking 08663 Gas cap set, vented and non-vented................ $59.99 08661 Locking vented cap kit............................ $42.99 Non-Locking 08662 Gas cap set, vented and non-vented................ $59.99 08660 Non-locking vented cap kit........................ $39.99 Replacement Parts 08667 Non-vented cap without lock ONLY................. $21.99 08669 Non-vented cap with lock ONLY.................... $24.99 08664 Vented cap without lock ONLY..................... $24.99 08668 Vented cap with lock ONLY........................ $26.99 08682 Vented bolt-in trim ring (sold each)................. $15.99 08670 Non-vented bolt-in trim ring (sold each)............ $.99 08666 Bolt-in cap trim ring gasket (pack of 10)............. $0.90 08677 Chrome mounting screws (pack of 12)............... $1.00 260231 Filler cap set, without lock. Includes vented and non-vented................................................. $42.99 260233 Filler cap set, with lock. Includes vented and non-vented................................................. $42.99 Note: Aircraft Caps Available with or without Locks for Either Bolt-In or Weld-In Applications.34 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS FOOT Custom Flamed Gas Caps These flamed gas caps fit 84-95 screw style bungs and are available as a set or individually. Black and chrome finish. 688243 Flame gas cap set........................ $65.99 688244 Flame gas cap right hand vented......... $33.99 688245 Flame gas cap left hand non-vented...... $33.99 Custom Mini Gas Cap Kit The gas cap is CNC-Machined from billet aluminum with a knurled edge with a satin/raw finish (gas cap has an O.D. of 1.75 ). Kit comes complete with gas cap and steel weld-in bung. 641909 Mini weld-in gas cap..................$39.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE 19037 ENGINE Custom Skull Gas Caps These gas caps match many of the other custom skull design parts in the catalog. They come in chrome skull with black eyes or black skull with chrome eyes and fit 84-95 screw style bungs. 688237 Skull gas cap set chrome.................. $65.99 688238 Skull gas cap set black.................... $65.99 688239 Skull gas cap right hand vented chrome.... $33.99 688240 Skull gas cap left hand non-vented chrome. $33.99 688241 Skull gas cap right hand vented black...... $33.99 688242 Skull gas cap left hand non-vented black... $33.99 19006 Live To Ride Gas Cap Covers Covers with chrome eagles feature a A Way of Life banner. Gold eagles have Eagle Spirit banners. They attach with double-sided foam tape and fit all late model gas caps (except molded plastic caps). A Way of Life 19006 Chrome eagle (sold each)........................................$10.99 Eagle Spirit 19037 Gold eagle (sold in pairs)........................................$33.99 GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES 47715 CHASSIS Custom Pop-Up Gas Caps Vented gas caps that don t protrude from the surface of the gas tank at all! To access the filler, you press and twist... the cap pops up, then unscrews normally For custom weld-in applications ONLY Sold each 47715 Stainless steel bung and cap.............. $99.99 Replacement Pop-Up Caps ONLY 47775 Stainless Steel........................... $42.99 47777 Chrome................................ $42.99 3-Dimensional Gas Cap Covers Distinctive covers are sandcast from hand-carved originals. Designed to fit over OEM style caps. Glue them on with 5-minute epoxy, or use silicone adhesive (not included). Sold each. 37863 Skull........... $38.99 37868 Flame.......... $27.99 Polished Aluminum Skull Gas Cap Cover Multiple skull design cast from an original hand-carved mold. Attaches to OEM style gas caps with epoxy (not included). Sold each. 37735 Polished Aluminum Skull Gas Cap Cover................ $21.99 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.35
25253 25246 25252 Fuel Tank Outlet Plug Used to plug the outlet on fuel tanks that use either fuel-injection or petcock adapter #62842-00. Also for use on aftermarket fuel tanks that have dual fuel outlets when only one is required. Polished chrome finish and includes o-ring. 643239 Polished chrome fuel tank outlet plug.........................$8.99 OFF 603558 ON RES DOWN OFF 603530 ON RES STRAIGHT Chrome Replacement Petcocks Chrome-plated duplicates of the stock gas valves used from 75-06. Available in three different outlet tube options, straight down, left-hand or right-hand for applications at the front, rear, or either side of the gas tanks. Complete with a chromed 13/16" nut and nylon mesh filter screen. 25246 Straight down spigot........$.99 25252 Left-side spigot..............$17.99 25253 Right-side spigot.............$.99 12731 Replacement 3-hole Viton seal (fits latest design with.260" fuel tubes).............................$1.50 Replacement Filter Screens 260373 Fits OEM pre-75.................$3.99 OFF ON RES OFF ON RES 12726 12727 BACKWARD FORWARD Petcock Adaptor Allows the use of a 22mm petcock in a fuel tank designed for Delphi fuel injection. Accepts any petcock that installs using a 22mm nut, chrome finish and includes o-ring. Sold each 643240 22mm petcock adaptor........$9.99 Click-Slick Petcocks by Goland Products Manufactured from 360 brass with stainless steel ball bearings and components Stainless steel internal ball bearings provide virtually friction-free movement of the petcock handle Available in either a brass or chromeplated finish Features quick detents with a 90º movement from on to off to reserve Made in the USA Chrome Click-Slick Petcocks with 22mm Threads for Fuel Tanks from 75-06 603530 Rear Facing................$109.99 603531 Downward facing..........$109.99 603532 Forward facing.............$109.99 603533 Straight facing.............$109.99 Click-Slick Petcocks with 3/8 -NPT Threads for Fuel Tanks Pre-75 603535 Rear Facing................$109.99 603536 Downward facing..........$109.99 603537 Forward facing.............$109.99 603538 Straight facing.............$109.99 Black Oxide Click-Slick Petcocks with 22mm Threads for Fuel Tanks from 75-06 603556 Rear Facing................$112.99 603557 Downward facing..........$112.99 603558 Forward facing............$112.99 603559 Straight facing............$112.99 Click-Slick Petcocks with 3/8 -NPT Threads for Fuel Tanks Pre-75 603551 Rear Facing...............$112.99 603552 Downward facing.........$112.99 603553 Forward facing............$112.99 603554 Straight facing.............$112.99 Weld-In EFI Plate for Custom Tanks Covert any custom tank to EFI by welding this plate into the base of the tank. Then bolt in an (OEM 75268-07) Sportster type fuel pump (not included) and you are ready to go. Plate dimensions are approximately 8.5 x 5.25 total width and length. Minimum width and length of space required for the pump 6.25 x 2.75 653105 Weld in plate for fuel pump.$59.99 25245 25243 Chrome Petcocks Engineered and designed to eliminate all internal O-rings. The innercore design insures against gas leakage while providing maximum flow. Features a filter screen, reserve setting, and chrome body. 12726 Fits OEM and custom tanks thru 74 with internal 3/8" NPT connection........................... $15.99 12727 3/8 NPT Petcock w/90 degree outlet. With reserve..........$15.99 25245 Fits OEM and custom tanks 75-82 with external 13/16" nut connection................ $.99 25243 Same fit as CC #25245 but with 90 barb........................$.99.36 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
27050 27051 APPAREL 632253 SEATS & BAGS 668376 FOOT Accel High-Flow Petcocks American-made high-flow petcocks feature chrome-plated bodies and 5/16" O.D. hose barbs. Other features include a reserve function, 100 micron filtering screens, and easy-to-grasp handles. Bodies are engineered to prevent leakage, yet deliver maximum fuel flow for high-performance applications. Two of the petcocks have a swiveling banjo which rotates 180 for custom hose routing. Fit all Original Equipment or aftermarket tanks with 22mm bungs. 27051 Petcock with rotating barb............................$99.99 27050 Petcock with straight down barb.......................$79.99 668376 Petcock with vertically rotating barb....................$99.99 632252 1/4 Petcocks for Custom Tanks These petcocks are available with or without the reserve feature, and fit any custom gas tank such as our aluminum peanut tank (#632501) and Paughco gas tanks that take 1/4 petcocks. 632252 1/4 NPT Petcock. No reserve........................ $38.99 632253 1/4 NPT Petcock. With reserve..................... $56.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE Viton Seals for Petcocks Viton material eliminates the swelling problems associated with the various fuels available today. The 3-hole design (not shown) fits petcocks with.260"-diameter fuel tubes. Pack of 10. 12728 4-hole seal...................$1.30 12731 Replacement 3-hole Viton seal (fits latest design with.260" fuel tubes).............................$1.50 19882 15093 K&N Nylon Inline Fuel Filters Fit 1/4" fuel line. 19882 Large (card of 12).............$6.75 15093 Small (card of 12).............$6.75 Wing Type Fuel Valve This classic was used on early Sportsters but it can be used on any tank with a 3/8 NPT petcock outlet. 688254 Wing type fuel valve...... $18.99 GASKETS TRANSMISSION & CLUTCH DRIVELINE 651854 WHEELS TIRES & BRAKES CHASSIS 18240 18255 See-Flow Glass Fuel Filters A custom in-line fuel filter for 1/4" or 5/16" line. SHEETMETAL Vacuum Petcock Bypass Kit Bypass the Original Equipment vacuum operated petcock. Easy to install. Fits most Big Twin and Sportster models from 98-06 (except fuel injected models). 25257 Vacuum Petcock Bypass Kit...$17.99 Chrome Fuel Filter Small size, but packs big protection for your motor. Easily cleaned, reusable screen. Chrome 18255 For 5/16" fuel line.............$8.99 18256 For 1/4" fuel line..............$6.99 Black 651855 For 5/16" fuel line.............$6.99 651854 For 1/4" fuel line..............$6.99 Chrome 18240 Complete filter for 1/4" line........................ $9.99 18239 Complete filter for 5/16" line........................ $9.99 Black 651856 Black filter for 1/4 line..... $9.49 651857 Black filter for 5/16 line.... $9.49 Replacement filter element 18241 Replacement element..... $2.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.37
6033 6026 6176 6175 EFI Fuel Line Kits by Goodridge USA These durable and attractive kits feature your choice of either clear or black PVC coated, Teflon lined, stainless steel braided hoses with chrome plated steel valves and hardware. Kits come complete with fuel line, necessary hardware and replacement o-rings. Clear coated Braided Stainless Steel 6176 Fits all 02-06 Touring models and 04-Up Dynas............... $42.99 6178 Fits all 08-Up Touring models $68.99 6180 Fits all 07-Up Sportster models........................... $68.99 Black PVC coated Braided Stainless Steel 6175 Fits all 02-06 Touring models and 04-Up Dynas............... $42.99 6177 Fits all 08-Up Touring models $68.99 6179 Fits all 07-Up Sportster models........................... $68.99 6031 6032 Hi-Flow Braided Fuel Line Crossovers by Goodridge These durable and attractive pre-made lines feature clear-coated stainless braided hose and chrome-plated steel compression fittings for easy installation. They are also available in a universal fitment for custom applications with 1/8 NPT ports in the bottom of the gas tank. Model Specific Pre-Made Fuel Line Crossovers 6026 Fits all FL/FX Softail models from 86-99.......................$28.99 6030 Fits all FL/FX Softail models from 00-Up.......................$28.99 6027 Fits all FXSTD Deuce models from 00-07.......................$28.99 6028 Fits all FXD Dyna models from 99-05............................$26.99 6029 Fits all FLH/FLT Touring models from 97-07.......................$28.99 Universal Pre-Made Fuel Line Crossovers 6033 9 Universal fuel line crossover with 1/8 NPT fittings..............$23.99 6034 6 Universal fuel line crossover with 1/8 NPT fittings..............$22.99 Replacement Parts 6031 6-pack small repl. seals for CCI # 6027, 6028, 6029, 6030.............................$2.99 6032 6-pack large repl. seal for CCI # 6026.......................$2.99 Quick Disconnect Fuel Crossover by Goodridge The stainless braided hose is compatible with gasoline, coolants, and ethanol. The hose finishers feature a stainless gear drive hose clamp for a reliable, long lasting seal. Chrome plated quick disconnect features durable viton o-rings to prevent leakage, stainless shut off valves eliminate fuel loss during tank removal, and QD assembly is rated at 250 PSI Universal design fits most models 6248 Crossover fuel line. $97.99 6249 Replacement o-rings (2 pack).............. $1.75 Steel Braided Fuel Line Kit This kit can be used to replace the fuel crossover line (between tanks) or fuel feed line (between petcock and carburetor). Fits all models with 1/4" I.D. fuel lines. Kits include 16" braided hose and a pair of chrome end caps. 270565 Steel Braided Fuel Line Kit....$15.99 Goodridge High Pressure Braided Fuel Line Kit for Fuelies Finally! Great looking fuel lines for your fuel-injected bike. Cleans up the last area to set off your custom paint job. 969 Fits all fuel injected models from 95-99........................................ $165.99.38 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS FOOT Inferno Dash Chrome-plated, die-cast metal dash matches the styling of the wide range of Inferno accessories. Complete with mounting hardware and rubber trim. Fit all Big Twin models (except Dyna Wide Glide models) from 68-95 equipped with Fat Bob tanks and a pre-96 FL-style speedometer. 27401 Long Inferno dash...................................$199.99 Long Mirage Dash Cover for Fat Bob Tanks Die-cast dash has a chrome-plated finish. Includes two extra-long trim pieces, a longer tripmeter reset knob and our unique rear hold-down. For all Big Twin models 68-95 with two-piece Fat Bob or flatside gas tanks and Fat Bob speedometers (except Dyna Wide Glide models). 26015 Complete dash kit...................................$9.99 Replacement Parts 26001 Trim rubbers (sold in pairs)..............................$4.99 Arlen Ness Flow Dash for Touring Models The latest design from Ness looks great on 08-Up Road Glide or Street Glide models. This unique design will bring life to your tank and give it a custom look. Constructed of heavy ABS plastic for premium quality and durability, comes ready to paint. 654008 Fits all 08- Road Glide and Street Glide models.... $159.95 HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE Arlen Ness Winged Dash & Tank Extension for Touring Models This new tank extension gives you the look of a sleek custom tank at a fraction of the cost. No cutting, grinding or welding necessary. This piece bolts directly onto your stock 09-Up Road Glide or Street Glide gas tank. Constructed from high quality composite materials for maximum strength. Each piece comes primed and ready to paint. Installation will require the use of a custom seat modification the factory seat. 6531 Fits all 09- Road Glide and Street Glide models.... $399.95 Note: Requires the use of a custom seat or modification to the OEM seat! WHEELS TIRES & BRAKES CHASSIS SHEETMETAL The Stash Dash for Touring Models This dash is the perfect replacement for the stock unit on you Bagger. It not only cleans-up and improves the profile of the gas tank but it also has a inner compartment which houses the gas cap and has a storage area for paperwork or other small items. It is available in either a chrome-plated finish or raw steel so you could paint it to match. It is designed to fit all 97-07 FLHT, FLHTC, FLHX, and FLTR models. Installation of this dash will require the use of a 97-later style Road King/ Street Glide seat. 610360 Chrome Stash Dash for Touring Models................$349.99 Custom Dash for Stretched Tanks Durable and paintable ABS plastic dashes with unique design for custom stretched tanks. 13239 Custom Dash with lamp lenses..$76.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.39
632040 632041 Gas Tank Knee Pads These universal fit rubber knee pads affix to your tank with double sided adhesive (included) and give tanks a very cool old school look! Available in 2 sizes to match most any tank configuration out there. The smaller size measures approx. 7 long x 3 1/2 tall at the highest point. The larger version measures approx. 7 long x 4 tall at the highest point. Stick these puppies on your tank and stand out from the crowd! Sold as pairs. 632040 Gas tank knee pads-small.....$21.99 632041 Gas tank knee pads-large....$29.99 Skull Lower Tank Panel Multiple skull design cast from an original hand carved mold. 37734 Fits most Fat Bob cast dashes from 65-99.......................$42.99 Chrome Skull Nut Cover Made in the USA by Wild 1 Mfg. to cover the hardware that holds the dash in place. Kits include red rhinestones for the eyes. Fits the cast dash on models without a dash-mounted choke cable. 19971 Chrome Skull Nut Cover......$17.99 Dash Center Mounting Bolt and Stud Includes chrome-plated center screw with stud and hardware. Fits Big Twins from 47-67 as original part replacement or can be used on custom applications where choke wire is not brought through dash. Sold each. 26162 Dash Center Mounting Bolt and Stud.........................$5.99 Dash Panels for Fat Bob Tanks Fits FX and Low Rider models with Fat Bob gas tanks from 77-84. 26348 Plain Dash Panel (repl. OEM 61647-77T)........................$25.99 Chrome Tank Panel New-style, show-chromed tank panel for Softail and FXWG models from 83-95. 84747 Chrome tank panel..........$35.99 Dash Panel for Fat Bob Gas Tanks Fits Fat Bob gas tanks when dash or instruments are not mounted on tanks. 26344 Plain Dash Panel for Fat Bob Gas Tanks.......................$23.99 Chrome Tank Panel Fits most models with split tanks, cast dash and a frame-mounted seat from 68-99. Replaces OEM 61118-81. 18439 Chrome Tank Panel..........$27.99 Steel Chrome Dash for FX Models Stamped steel, chrome-plated instrument housing for tank mounted gauges on FX models from 77-84. Includes thick style tank-to-housing trim rubber and warning light hole plugs for custom applications. 26339 Dash cover..................$39.99 26338 Replacement trim rubber (repl. OEM 601-82)....................$4.99 26308 Hole plugs (pack of 10)........$1.50 Chrome Dash Kit All the chrome parts in one convenient kit to help you convert to the dash used on several models 77-84. Will not work with flatside gas tanks. 91339 Chrome Dash Kit.............$55.99.40 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS 310195 FOOT Chrome Dash and Speedometer Kits Includes a speedometer with 89-04 face, chrome dash, lenses, rubber trim, mounting hardware, ignition switch with two keys and base plate with lights. Fit many models with Sport Bob and Fat Bob tanks thru 95. 26480 2240:60 ratio for front wheel speedometer drive models with selfcancelling turn signals from 84-95...........................$229.99 26481 2240:60 ratio for front wheel speedometer drive models without self-cancelling turn signals from 84-90......................$229.99 310192 310193 Chrome Die-Cast Dash Kit for Fat Bob Tanks Kits include chrome die- cast dash with trim rubber and lenses, speedometer, ignition switch and base plate assembly with hardware. Ideal for ground-up assembly or Fat Bob tank conversions. Available with 1:1 drive ratios. 310175 1:1 ratio kit. Fits FL models 62-80, FX models 71-72 and FXWG models 80-83............ $189.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS 310194 Rubber Dash Trim This handy item is designed to replace the rubber dash trim on 87-94 FXR models and the nacelle trim on 87-94 FLHS models. The trim is also a perfect match for Custom Chrome Rick Doss ABS dashes and many other protective uses.50"-long. 13232 Replaces OEM 61117-86.... $4.99 TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES Dash Kit with Integral Tach Features a 120 mph speedometer with built-in coil driven tachometer that works with all Harley 12 volt systems. Kit includes speedometer, two-light chrome dash cover, base plate with hardware, and ignition switch with keys. 310139 2:1 speedo/tach dash kit.....$190.99 Note: 91-03 self-canceling turn signals will not self cancel. 91-03 models use a distance counting reed switch to selfcancel turn signals. The turn signals will operate normally, but will not self cancel. See Section 15 for more Speedometers and Gauges Chrome Dash and Mounting Kits These chrome kits contain the dash mounting and trim parts required for Fat Bob tanks in a single, easy-to-order package - simply choose from our great variety of large diameter speedometers to complete the installation. Each kit comes complete with chrome dash cover, base plate assembly with hardware and ignition switch with keys. 310192 Cateye dash and mounting kit.......................... $88.99 310193 Two-light dash and mounting kit............................$94.99 310194 Three-light dash and mounting kit............................$93.99 310195 Late-style dash and mounting kit...........................$124.99 Note: Not compatible with flat side tanks. Custom Dash Cover This custom dash cover has had the indicator lights and switch hole removed for a clean custom look. Designed for use with large diameter FL style speedometer and Fat Bob tanks. Perfect for custom FX and FL applications with remote mounted indicator lights and ignition switches. Fits all Big Twin 4-speed models. 3106 Dash only (fits all two-light base plates)................... $35.99 CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.41
26188 25972 Two-Light and Three-Light Dashes for Fat Bob Tanks Show-chrome dash covers complete with lenses and trim rubber. Replacement lenses and trim rubber also available separately. 26188 2-light dash.................$42.99 25972 3-light dash.................$39.99 26180 Replacement trim rubber......$4.99 Classic Cast Dashes Heavy-duty zinc die-cast dashes are beautifully chrome-plated duplicates of their Original Equipment counterparts. Complete in every detail, each dash also includes the lenses, light divider, and trim rubbers. May be installed on most 4-speed frames and Softail models when the appropriate dash base is used. 26187 Fits all models 68-90 (replaces OEM 71241-68B)..................$69.99 26186 Fits all models with self-cancelling turn signals from 91-95 (except Dyna Wide Glide models) replaces OEM 71241-91...............$69.99 Replacement Parts These pieces will fit Original Equipment dashes as well as the dashes listed above. 26239 Lens kit: Includes lenses, divider and hardware....................$9.99 26240 Trim rubbers (pair) replaces OEM 71295-68.....................$4.99 26238 Cast dash mounting plate....$44.99 Three-Light Dash Mounting Plate Includes wiring and sockets. 25971 Fits CC dash #25972..........$39.99 26191 Replacement dash base light sockets (pack of five)................$22.99 Cateye Dash for Fat Bob Tanks Show-chrome cateye-style dash with lenses. Replacement lenses are sold each. 26189 Cateye dash.................$39.99 26356 Cateye red lens-plastic.........$4.49 Plain Dash Mounting Plate Basic mounting plate for use with Fat Bob dash covers #25972 and #26188 when dash lighting is not desired. 25235 Without dash lights..........$.99 Late-Style Cast Dash Mounting Plate A complete mounting kit for many models with cast dashes from 68-99 (except Dyna Wide Glide models). Includes all the hardware and spacers necessary to fit both the standard early-style Fat Bob tanks and the later-style flatside Fat Bob tanks. Also included are the circuit breaker clips, the rubber strip for mounting circuit breakers with flatside tanks, ignition switch mounting screws, three insulated terminal studs and five light sockets with bulbs. Everything necessary for a quick and easy installation. Cast dash cover not included. 26238 Cast dash mounting plate....$44.99 26191 Replacement dash base light sockets (pack of five)................$22.99.42 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS Trimlok Dash Trim Easy-to-install, while providing style and protection. Genuine Trimlok steel reinforced vinyl trim is cut to length to fit all stamped steel two and three-light dashes. Available in pre-cut 27 inch and 10 foot lengths in plain black. 26181 Black (27"-long).......................................$4.99 26241 Black (10 feet-long)....................................$1.00 Odometer Reset Cable for FX Models Complete odometer reset cable assembly for all 4-speed FX models (except FXWG) 73-84. Includes chrome knurled knob, rubber grommet, washer, spring and flexible cable. Fully assembled, ready to install. 26445 Replaces OEM 67210-73T........................... $10.90 FOOT HAND LIGHTING ELECTRICAL Hi-Beam Indicator Lamp Original style, multi-piece high beam indicator lamp assembly with replaceable bulb included. Fits FX models from 73-74, as well as Sportster models from 68-73. Can also be used to replace the one-piece throwaway indicator lamp used on FX models from 75-85. 26444 Replaces OEM 67891-68............................. $8.99 EXHAUST INTAKE ENGINE Trim Rubber for Low Rider Dash Thick style, black rubber trim for FX dual gauge housings. Neatly fills the open space between the tanks and the instrument housing while isolating the gauges from vibration. 26338 Replacement trim rubber (repl. OEM 601-82)...........$4.99 26356 310154 GASKETS TRANSMISSION & CLUTCH Dash Switch Decal Fits FL models from 68-84, FX models from 71-72, FXWG models from 80-86, and Softail models from 84-99. Sold in pack of 5. 310136 Replaces OEM 71300-79..................... $2.00 26352 26353 26354 Replacement Lenses for Fat Bob Dash Covers Can be used to restore Original Equipment dashes or as replacement parts for CC dashes. Sold each. 26356 Cateye red lens-plastic............................... $4.49 26354 3-light dash red lens (2 used) plastic................. $5.99 26353 3-light dash blue lens (1 used) plastic................ $5.99 26352 2-light dash red lens GEN / OIL plastic............... $4.99 310154 Cateye dash lens, green............................. $4.49 DRIVELINE WHEELS TIRES & BRAKES CHASSIS Instrument Light Socket Assemblies OEM style replacement light socket assemblies include socket with wire and bulb. Available for most Big Twins and Sportster models 76-97. Sold in 5 packs. 310113 Steel, 1 wire type.............$4.80 Chrome Dash Cover Screws Complete 4-piece set of chrome plated, buttonhead panel screws. Fit all Low Rider and FXEF dashes 77-84. Set of 4. 26441 Chrome Dash Cover Screws.......................... $3.99 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.43
Chin Fairing Big Twin models Constructed of high-impact A.B.S. plastic, this chin fairing is easily painted to match any bike. Mounting is achieved with large cushioned clamps, and it will even clear stock or aftermarket highway peg kits. Includes mounting hardware and instructions 55058 Fits all FXR models from 82-94 and Softail models from 87-99 (except Fat Boy and Heritage Softail models)..........$124.99 55059 Fits all Dyna Glide models from 91-05..................$6.99 Arlen Ness Side Covers for FXR Models Fit all FXR models from 82-94, (and 99 FXR II and FXR III models) and replace the Original Equipment parts. Manufactured from high impact black A.B.S. plastic which can be painted to match any bike. When installed, they fit between the frame tubes in the area below the seat and cover the brake and electrical components. Sold in pairs. 28258 Plain Side Covers......................................$99.99 Chin Fairing for Evolution Sportster Models Constructed of high impact A.B.S. plastic, this chin fairing is easily painted. Mounts with large cushioned clamps. Although it s designed to fit all Evolution Sportster models from 86-03, it can be modified to fit on earlier models. Includes hardware and instructions. 55008 Unpainted chin fairing...............................$124.99 Chrome Side Covers for FXR Models Perfectly chrome-plated steel side covers to replace the standard plastic covers. Fit all FXR models from 82-94. 25263 FXR Side Covers.......................................$75.99 16051 Well-nuts blind fasteners (repl. OEM 8099) pack of 10.....$1.30 Chrome Ignition Module Cover Chromed steel cover replaces the standard black metal cover on Sportster models from 82-03. 25254 Replaces OEM 66328-82T..............................$11.99.44 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL 693806 693803 SEATS & BAGS FOOT HAND LIGHTING 693818 ELECTRICAL EXHAUST INTAKE 693822 Oil Cooler Kit by Pegasus Performance This billet oil cooler kit comes with braided steel hose, chrome hose ends, fittings and billet frame clamps. Installation on Twin Cam models requires the purchase of an oil filter adapter kit and additional fittings. Mounts to the downtubes on Softail and Touring models. Made in the USA. 693818 Polished billet oil cooler kit...........................$239.99 693819 Black anodized billet oil cooler kit.....................$269.99 Oil Cooler Adapter for Twin Cams 693822 Oil cooler adapter....................................$9.99 693804 693805 Billet Re-Useable Oil Filters by Pegasus Performance Finally a re-useable oil filter for your Twin Cam or EVO engines. CNC-Machined from billet aluminum and available in either a Polished, Satin, Black anodized, and Black anodized with highlighted fins. It has a special removable/washable micronic 304 Stainless Steel mesh filter and 3 high-power magnets grab any metal particles before they even get to the filter. This filter also increases overall horsepower by 3%-5% by keeping the engine cooler and allowing the oil to flow more freely, which reduces oil temperature as well as oil levels in the engines sump thereby reducing oil/flywheel obstruction. Bottom line this oil filter, filters better than any paper filter on the market, never needs to be replaced, and is an environmentally green product. Fits all Twin Cam and Evolution engines. Made in the USA. 693806 Polished.......................................... $6.99 693803 Satin............................................. $6.99 693804 Black Anodized................................... $6.99 693805 Black Anodized with highlighted fins............... $9.99 Replacement Parts 693807 Replacement oil filter cartridge..................... $58.99 693808 Replacement O-ring................................. $2.49 ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES Super Mini Oil Cooler Kit Kit includes clamps, hose ties, and oil line. Black only. Measures 5"-high x 2"-wide x 1"-thick. 26412 Super Mini Oil Cooler Kit........................... $38.99 GENERAL CROSS REFERENCE www.customchrome.com.45
KEEP YOUR COOL EVEN IN STOP AND GO TRAFFIC UltraCool Oil Cooling System Features Heavy Duty Design All steel housing for increased durability Sturdy ABS grill deflects road debris from fans Heavy-duty 1/8 inch thick mounting bracket Custom Oil Adapter Solid aluminum construction with a silicone coated gasket 6-bolt pattern for a leak free installation Built in thermal switch to help maintain the proper oil operating temperature Dual Fan Technology Compact yet powerful blade design for maximum air Powerful dual 90CFM fans Fans are rated to IP55 standards to resist dust and moisture invasion Braided Stainless Steel Oil Lines Assembled from 304 stainless braiding with PTFE silicone tubing AN-6 fittings for maximum oil flow LED Indicator Light Dash mounted LED for high visibilty. A clear indication your fans are working. Another UltraCool exclusive. Heat Exchanger Highly efficient 17-row design for maximum oil cooling.46 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS FOOT HAND 642205 LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE 642202 GASKETS 642210 UltraCool Oil Cooling Systems Most riders will agree that when you are stuck in stop-n-go traffic or riding on those hot summer days, is when your bike will start to build up excessive amounts of heat leading to loss of performance, shortened engine longevity as well as discomfort to the rider. The goal is to maintain your engines oil temperature. The way to do this is to let your engine get up to 210-220 to burn off the condensation in the crank cases. Then turn on the fan to drive the temperature down to 190 at that time the fan will turn off. As the temperature goes up to 210 the fan turns on to keep your engine cool. An oil cooler should be built to last, Made from top quality materials. UltraCool uses all stainless steel bolts and nylock nuts. The covers are a steel construction with an ABS plastic grill that can take the abuse from the rocks and debris from the road. The custom made oil filter adapter is machined from 6061 aluminum. The cooling fans are water resistant and dust proof and the thermal switch is rated at 100,000 cycles of service. Touring Models 642202 Fits 09-15 FLH/FLT models (except for Trikes) chrome.....................$399.99 642203 Fits 09-15 FLH/FLT models (except for Trikes) black.......................$399.99 642200 Fits 99-08 FLH/FLT models (except for Trikes) chrome.....................$399.99 642201 Fits 99-08 FLH/FLT models (except for Trikes) black.......................$399.99 642208 Fits 09-15 Trike models, chrome........................................$399.99 642209 Fits 09-15 Trike models, black..........................................$399.99 642206 Fits 99-08 Trike models, chrome........................................$399.99 642207 Fits 99-08 Trike models, black..........................................$399.99 Dyna Models 642204 Fits 93-15 FXD models, (non ABS) chrome...............................$399.99 642205 Fits 93-15 FXD models, (non ABS) black.................................$399.99 Softail Models 642210 Fits 00-15 Softail models, chrome.......................................$499.99 642211 Fits 00-15 Softail models, black.........................................$499.99 www.customchrome.com.47 TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE
631990 650229 631991 Custom Oil Tanks for Twin Cam 88 Softail Models These oil tanks are a perfect way to give your new Softail an old school look. Chromed steel construction with built-in battery box. There are two styles to choose from, and they fit all Softail models from 00-06. Oil fittings not included. 631990 Round.............................................$289.99 631991 Domed............................................$269.99 632062 Bobber-Style Oil Tanks with Battery Box Here is a old school oil tank for your next bobber bike project. Chrome steel tanks with built-in battery boxes come with front rubber mount and tank cap included. They fit Big Twin rigid frames from 36-57 and most custom rigid frames on the market today, also 84-99 Softail models. Lines come out of the bottom of the tank for a nice clean look. Oil fittings not included. 632062 Domed oil tank.... $299.99 650223 650230 Chrome Round Oil Tanks for Softail Models by Santee Fits 86-99 stock Softail frames and Santee Softail style frames. Available in a Round or Domed version with either a side or center fill with built in battery box. 3.5 Qts. Oil fittings not included. Round Oil Tanks 650228 Chrome Round side fill.............................. $399.99 650229 Chrome Round center fill............................ $399.99 Domed Oil Tank 650230 Chrome Domed center fill........................... $399.99 650237 Chrome Oil Tanks for Softail Models by Santee Fits 89-99 stock Softail frames and Santee Softail style frames. Winged version with either a side or center fill. Winged Oil Tanks 650222 Chrome Winged side fill............................ $399.99 650223 Chrome Winged center fill.......................... $399.99 Chrome Winged Oil Tanks for Twin Cam Softail Models by Santee Fits 00-Up Twin Cam Softails. Available with either a side or center fill spout. Replaces OEM #62498-00A. Does not utilize OEM dipstick. Oil plug is included. Winged Oil Tanks 650237 Chrome Winged side fill.............................$379.99 Standard Oil Tanks Fits 00-Up Twin Cam Softails. Replaces OEM #62498-00A. 650245 Chrome side fill......................................$189.99 Oil Tank for Softail Models A perfect chrome replacement for the Original Equipment oil tank. Fits all Softail models from 89-99. 78307 Replaces OEM 62498-89A................. $169.99.48 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL SEATS & BAGS Chrome Oil Tank for FXR Models A complete chrome oil tank assembly for all FXR models from 82-90 (except 86-up FXR Super Glide models). Adds sensational style and simplifies oil draining through the addition of a second drain hole on the left rear of the tank. Included with the tank is a remote drain hose fitting kit which allows it to be drained from the kickstand side through a rubber hose which, when not in use, plugs onto a frame mounted dummy fitting which is included in the kit. Machine polished and then triple chrome-plated. Replaces OEMs 62406-81, 62406-86 and 624-86. 28104 Oil tank and remote drain kit (this tank has no oil level "sight" glass)...............................................$129.99 16051 Well-nuts blind fasteners (repl. OEM 8099) pack of 10.....$1.30 651266 650231 Custom 3 qt. Barrel Style Oil Tanks by Santee These Chrome steel oil tanks were styled after the classic Barrel tanks on choppers from the 60 s and 70 s. They have a universal mounting system so they will fit just about anything and are available with or without a spin-on filter. Kits include 3 rubber mounts and tank cap. Oil fittings not included. 650231 3 qt. round oil tank............................... $349.99 650232 3 qt. round oil tank with spin-on filter.............. $409.99 650235 FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE 78305 78301 Chrome Replacement Oil Tanks Duplicates of the Original Equipment oil talks finished in brilliant chrome. 78301 Fits 4-speed FL and FX Big Twin models from 82-86 (repl. OEM 62504-82)...........................................$9.99 78305 Fits 4-speed FL and FX Big Twin models from 65-E82 (repl. OEM 62504-65A)..........................................$124.99 Chrome Wrap-Around Oil Tank by Santee These 4 qt. oil tanks will fit rigid frames and 58-64 swingarm frames with kickstart and steel primaries, but will NOT fit models with aluminum primaries or 79-84 4-speed transmissions. 650235 Chrome center fill oil tank......................... $259.99 651266 Chrome side fill oil tank with spin-on oil filter....... $349.99 650219 GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS 650218 SHEETMETAL Oil Tanks for XL Rigid Frames by Paughco This oil tank is for use with rigid Sportster frames manufactured by Paughco. Drain plug sold separately. Made in USA by Paughco. 632247 Oil tank for use w/paughco XL rigid frames.............$196.99 632248 Oil tank drain plug....................................$10.99 Custom Oil Tanks for FL/FX Models and Santee 4-speed Swingarm Frames 3.5 qt. chrome oil tanks for 65-86 FL and FX 4-speed models, that provide easy access to the battery, and bolt to the stock mounts. They will also fit Santee 4-speed swingarm frames. Kits include oil tank and 2-pc. front mounting bracket for an easy installation. 650218 Chrome side fill.................................. $379.99 650219 Chrome side fill with spin-on filter............... $399.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.49
651265 651264 Chrome 3-Quart Wrap-Around Oil Tank by Santee These 3-quart oil tanks use the small kickstart Sportster battery and fit rigid frames and 58-64 swingarm frames with aluminum primaries and 79-84 4-speed transmissions with steel primaries. 651264 Chrome 3-quart side fill oil tank.......................$269.99 651265 Chrome 3-quart center fill oil tank.....................$279.99 Chrome Oil Tanks for Sportster Models Great looking parts that add a bright splash of chrome to the right side of Sportster models. Accurate reproductions of the Original Equipment parts, they replace the stock black units perfectly. The ideal complement for our chrome ignition module and battery covers. 12588 Fits Sportster models from 83-93 (repl. OEM 62475-83).... $139.99 688557 Fits Sportster models from 97-03....................... $139.99 650233 Custom Wrap-Around Oil Tanks for Big Twins by Santee 3.5 qt. custom wrap-around oil tanks. Available with or without spin-on oil filter and in either a side or center fill. When used with an FXE battery they ll fit rigid and 58-64 swingarm frames, and will also clear 79-84 4-speed transmissions. Includes oil line fittings. Side Fill 650233 Custom 3.5 qt. oil tank...............................$309.99 650234 Custom 3.5 qt. oil tank with spin-on filter..............$359.99 Chrome Oil Tank Cover for XL Models 94-03 This chrome oil tank cover set is made of stamped steel and fits over the oil tank on 94-03 Sportster models without disassembly. 688198 Oil tank cover set, chrome fits 94-03 XL models......... $79.99 26397 Wrap-Around Oil Tank for Electric Start Sportster Models This 3 1/2 quart oil tank will accept the stock FXE electric start battery. It also fits all 67-78 stock electric start Sportster models, and is adaptable to many custom frames (on 73-78 stock frames, the removal of the rear frame support struts may be required).comes complete with a cap, oil line fittings, and mounting hardware. 12599 Chrome oil tank.....................................$265.99 2704 Oil Tank Mounting Kits For Softail Models Includes chrome front and rear brackets to mount oil tanks to most aftermarket and Original Equipment Softail frames. 26397 Complete oil tank mounting kit....................... $25.99 2704 Rear bracket only, chrome (replaces OEM 62704-84)..... $22.99 2707 Front bracket only, chrome (replaces OEM 62707-84)..... $8.99.50 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
27101 SHEETMETAL Cap Detail APPAREL SEATS & BAGS 27100 688100 FOOT Chrome Oil Tank Dipsticks Chrome-plated replacements for Original Equipment dipsticks. 27100 With short dipstick for Softail models from 84-99 and Sportster models from 82-99 (repl. OEM 62595-82A)...............$8.99 27101 With long dipstick for FL models from 70-84, FX models from 71-85, FXR models from 82-83, FLT models from 80-86 and XLCH models from 70-78 (repl. OEM 62625-70A)..........$8.99 688101 Skull Dipsticks These skull themed oil dipsticks are exact replacements for the OEM dipstick. 688100 Skull dipstick for 00-Up Softail models............... $39.99 688101 Skull dipstick for 00-06 Touring models.............. $37.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE Oil Tank Plug Chrome-cap oil tank super plug for all Original Equipment side-fill oil tanks from 65-99 and most custom tanks. 25674 Replaces OEM 62644-84T...............................$5.99 ENGINE GASKETS 651262 Oil Temperature Dipstick for Late Sportsters Available with either a white face and black letters or a black face with white letters. Replaces the stock oil dipstick. Will not fit XR1200 models. Sold each. 688199 Oil temperature dipstick 04- XL models, white face. $49.99 688200 Oil temperature dipstick 04- XL models, black face.. $49.99 TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES 93924 CHASSIS SHEETMETAL 651263 Replacement Oil Tank Caps by Paughco Replacement oil tank caps for most side and center fill oil tanks. Made in the USA. 651262 Chrome-plated 1 1/16-24 threaded cap for top fill oil tanks.....................................................$31.99 651263 Chrome-plated push-in rubber filler plug for side fill oil tanks.....................................................$16.99 939 Chrome Oil Tank Plugs with Dipstick Chrome-plated replacement oil tank plugs with dipsticks. 939 Fits Dyna Glide models from 91-99 (repl. OEMs 62681-92A and 62685-95A).................................... $29.99 93924 Fits FLT, FLHT, FLHS and Road King models from 93-99 (repl. OEMs 62640-93 and 62607-93)...................... $22.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.51
Chrome Oil Filter Housing for Evolution Big Twins Models Replace that original equipment black or silver painted oil filter housing with a nice clean looking chrome aluminum die cast one. For custom slip-over steel braided or rubber oil line applications. Accepts all Harley style spin-on oil filters. Includes chrome oil line fittings. 20302 Fits Evolution Big Twin models 92-99...................$35.99 Billet Oil Filter Mount by Pegasus Performance Machined from T6 aircraft aluminum, this oil filter mount bolts directly on your EVO style engine. The oil line holes have 1/8-27 NPT threads to accept either barbed fittings or stainless oil line fittings (sold separately). 693821 Billet EVO oil filter mount, polished...................$2.99 Aluminum Oil Tank Drain Valves Made from 6061 aluminum that has been heat-treated to T6. They permanently replace the stock drain plug and fit all stock or aftermarket oil tanks with 5/8"-18 threads for dramatically simpler oil changes. Attach a piece of 1/2" I.D. hose to the spigot and turn counter-clockwise with a wrench until oil flows into your catch pan. Natural finish. Sold each. 18227 Oil Tank Drain Valve.................................. $31.99 Generator Oil Filter Adapter This adaptor allows you to install an oil filter in place of the generator on 36-69 motors as well as our Pandemonium or S&S Shovelhead engines with generator/alternator bottoms. Use OEM 63796-77A or equivalent aftermarket oil filter. Chrome finish. 632025 Generator oil filter adapter...........................$1.99 Chrome Oil Tank Cap Assembly For stock oil tanks on all 4-speed Big Twin models (except Softail models) thru 82 and 67-E78 Sportster models with electric start. 12352 Replaces OEM 62610-52TA............................ $28.99 25334 Oil tank gasket 66-82 (pack of 10) replaces OEM 62628-66.................................................. $0.85.52 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL 270019 25247 Spin-On Oil Filter Kit A high-tech replacement for your canistertype oil filters. It s approximately the same size as the stock unit and accepts CC #25250 chrome spin-on filter to eliminate leaks. Makes filter changes clean and easy. Comes with both threaded and slip-on fittings. Uses our mounting brackets sold separately. 26650 Spin-on filter kit............... $56.99 25250 Chrome oil filter (replaces OEM #63796-77A).................... $8.99 Filter Not Included SEATS & BAGS FOOT HAND 25248 LIGHTING Oil Filter Kits Full flow automotive style spin-on oil filter kits. Each of these custom kits includes a chromed heavy-gauge steel bracket, chrome disposable oil filter, and all required hoses and clamps for installation. 25247 Fits all 70-78 Big Twins without front motor mounted rectifier/regulator (mounts on top of front motor mount)...................... $57.99 25248 For all Sportster models 57-77 (mounts to left front motor mount location).............. $55.99 270019 Fits frame tubes, excellent for custom applications........................................ $51.99 25250 Chrome oil filter (replaces OEM #63796-77A)...................................... $8.99 26653 26654 26655 Oil Filter Mounting Brackets Chrome steel brackets to mount accessory oil filters. Designed for use in conjunction with CC # s 26650 or 26652 oil filter kits. Available for rigid and swingarm 4-speed Big Twin frames from 40-86. 26653 Fits 40-57 rigid frames (repl. OEM 63860-50)........................$9.99 26654 Fits 58-64 swingarm frames (repl. OEM 63860-58A).................$9.99 26655 Fits 65-86 4-speed frames (except Softail models)...................$9.99 ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH Heavy-Duty Rubber Mounts Replacement rubber mount is used for mounting Harley battery boxes and oil tanks. Made of quality rubber with 1/4"-20 x 1/2" long threaded studs and steel plates. This mount also works great for mounting many custom parts. Replaces OEM 62563-65. Pack of 10. 16055 Heavy-Duty Rubber Mounts................ $2.80 DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL 16050 Rubber Vibration Resistant Mounting Studs This is just the answer for custom builders. These studs are perfect for mounting gas and oil tanks. Sold in packs of 5 (unless otherwise noted). 16050 1/4"-20 x 1/2" stud both ends.............. $1.80 Filter Pac Custom oil filter and regulator mount designed to clean-up front lower mount area. Attaches to the front of the engine. Includes a chrome billet aluminum base plate, chrome hose fittings and a chrome oil filter. Utilizes stock regulator. Fits all Softail and 4-speed Big Twin models from 75-99. 25270 Complete Filter Pack Kit........................................ $64.99 26109 Replacement chrome oil filter (replaces OEM 63782-80)............ $6.99 25543 Replacement Black Oil Filter (Replaces OEM 63810-80)............. $6.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.53
688250 688251 Crimp Hose Clamps OEM style hose clamps. Note: Diameters listed are before crimping. Sold in packs of 50. 260482 17/32" (.531) diameter. Fits 1/4" I.D. reinforced rubber fuel line and vent hoses (repl. OEM 100)...................... $0.32 260483 19/32" (.594) diameter. Fits 5/16" I.D. rubber remote brake reservoir hose (repl. OEM 10038)....................... $0.32 260484 11/16" (.687) diameter. Fits 3/8" I.D. reinforced rubber oil and vent hoses (repl. OEM 10020A)......................... $0.32 260485 13/16" (.812) diameter. Fits all tank drain hoses (repl. OEM 10086)............................................... $0.32 Oil Line Retainers for Twin Cam Models Every time the oil lines are removed from the oil tank these retainers should be replaced in order to avoid any leakage. 688250 Oil line retainers (pr) to engine OEM 63632-00......... $.99 688251 Oil line retainers (pr) to tank OEM 63783-00............ $.99 020538 Oil Line Fittings Chrome fittings used for oil tank, oil pump, oil coolers, carb fuel inlet, etc. Sold in 5 pack. 020531 Straight fitting. 3/8" hose to 1/8" NPT. Replaces OEM 63533-41.........................................................$1.60 020533 Straight fitting. 5/16" hose to 1/8" NPT.....................$4.00 020535 Straight fitting. 5/16" hose to 1/4" NPT.....................$3.80 020536 90 fitting. 5/16" hose to 1/8" NPT. Replaces OEM 62375-57..$6.80 020538 Plug 1/8" NPT (repl. OEM 42311-58)......................$3.00 020539 Pipe plug, 1/4" NPT.......................................$3.60 12533 12534 Original-Style Oil Pump Fittings Original-style fittings used with some custom oil tanks to convert nipples so stainless-steel braided lines may be used. Set of 3. 12533 Fit nylon and braided hose..............................$7.99 12534 Fit steel and braided fixed-end lines................... $12.99 633244 633245 Chrome Oil Fitting 1/4 NPT x 90 and Hose Barb 1/4 NPT x 3/8 Oil line fittings and hose barbs to connect oil lines to Santee oil tanks (CCI# 631990-91) Oil line fitting 633244 1/4 NPT x 90...........................................$7.49 Hose Barbs 633245 1/4 NPT x 3/8...........................................$5.99 20234 84753 20235 Oil Line T-Piece and Fittings Brass T-piece with 3/8" spigot and chrome-plated oil line fittings with 1/8" NPT thread and 3/8" spigot. Sold each. 84753 Brass T-piece...........................................$8.99 20235 Chrome hose fitting, 3/8" hose. (repl. OEM 63533-41) Sold each......................................................$4.99 20234 Elbow, 90.............................................$4.99.54 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
270609 APPAREL 270608 SEATS & BAGS Custom Hose Clamps Fits over oil and fuel lines. Available with chrome or blue anodized finish. Sold in 6 packs. 270600 Chrome. Fits 3/8" and 5/16" I.D. hoses (up to 5/8" O.D.).......$25.99 270604 Blue. Fits 3/8" and 5/16" I.D. hoses (up to 5/8" O.D.).............$24.99 270601 Chrome. Fits 1/4" I.D. hose (up to 1/2" O.D.)...................$24.99 270605 Blue. Fits 1/4" I.D. hose (up to 1/2" O.D.)........................$24.99 270607 270606 Custom Hose Clamps These custom hose clamps feature a great look with reliable function. Under each custom hose cover is a weather resistant worm-drive hose clamp. Sold in packs of 6. 270606 3/8"-diameter. Slotted........$25.99 270607 1/4"-diameter. Slotted........$25.99 270608 3/8"-diameter. Grooved......$24.99 270609 1/4"-diameter. Grooved......$24.99 Mini Hose Clamps Quality clamps for all 7/32" to 5/8" O.D. hose. 19883 Card of 24................ $19.99 19878 Box of 10.................. $6.99 380305 FOOT HAND LIGHTING ELECTRICAL 380300 380351 Hose Separators Triple Hose Separator Available in plain or ball milled to match our 380303 other custom accessories, these die-cast hose separators will fit 3/8" or 5/16" I.D. rubber or stainless steel oil and fuel lines on Big Twin and Sportster models. Sold each. 380353 380301 380352 380302 Plain Price Ball Milled Price 380300 $7.99 78396 $7.49 Chrome 380301 $7.99 380351 $7.49 Polished 380302 $6.99 380352 $6.99 Blue 380303 $7.99 380353 $7.49 Black Keep lines neatly bundled with these separators fit 3/8" or 5/16" rubber or stainless steel hoses. Secures with flush sockethead screws. 380305 Chrome................... $9.99 380355 Chrome ball milled......... $9.99 EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.55
25460 Oil Pressure Switch Quality replacement oil pressure switch for XL and K models 54-76 and Big Twin (except Evo) 41-84. Replaces OEM 26552-72, sold each. 688594 Oil pressure switch (repl. OEM 26552-72)...................$10.99 Oil Pressure Switch Wrench Avoid scratching or damaging your oil pressure switch during installation or removal with this handy two piece tool. 688722 Oil pressure switch wrench....$17.99 25464 25463 Accel Oil Pressure Switches American-made units with heavy-duty contacts, brass ferrule, thermoplastic insulator and a bright finish. Fits Sportster and K models from 54-76 and Big Twins from 41-84 (except Evolution models). 25460 Replaces OEM 26552-72......$15.99 Fits Sportster models from 77-03 25463 Replaces OEM 26554-77......$16.99 Fits Evolution Big Twin models from 84-99 (except models with electric oil pressure gauge) 25464 Replaces OEM 26561-84......$13.99 177 Oil Pressure Switches Replacement switch has heavy-duty contacts and thermoplastic insulator. Made in the USA. Fits FXD 99, Big Twin 99-13 (except models with electric oil pressure gauges). 177 Oil pressure switch. Replaces OEM 26561-84................. $10.99 688635 Twin Cam Oil Pressure Switch Oil pressure switch for all Twin Cam models and V-rod models 02-Up. Sold each. 688635 Oil pressure switch (repl. OEM 26561-99)....................$5.99 Turn Your Stock Softail into a Slim & Stylish Bobber SEE DETAILS ON PAGE.02 Before Choose 1 of 3 Custom Tanks! Conversion tank frame adapter, rear fender, struts, and solo seat After Find your local Custom Chrome Dealer at www.customchrome.com.56 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.
APPAREL 6036 6050 SEATS & BAGS 6004 FOOT 6048 HAND 6049 LIGHTING RevTech Custom Oil Lines Pre-assembled oil lines are perfect for custom applications. They feature chrome-plated steel fittings and -6 stainless steel braided hose. 6035 8 pre-assembled universal S/S braided oil line...........$23.99 6036 9 pre-assembled universal S/S braided oil line...........$31.99 6037 10 pre-assembled universal S/S braided oil line.........$31.99 6038 11 pre-assembled universal S/S braided oil line.........$25.99 6039 13 pre-assembled universal S/S braided oil line.........$33.99 6040 15 pre-assembled universal S/S braided oil line.........$26.99 6041 16 pre-assembled universal S/S braided oil line.........$26.99 6042 17 pre-assembled universal S/S braided oil line.........$27.99 6043 18 pre-assembled universal S/S braided oil line.........$35.99 6044 20 pre-assembled universal S/S braided oil line.........$28.99 6045 22 pre-assembled universal S/S braided oil line.........$28.99 6046 24 pre-assembled universal S/S braided oil line.........$38.99 6047 26 pre-assembled universal S/S braided oil line.........$38.99 6048 Replacement nut, 2-pack...............................$6.99 6049 Replacement seals, 6-pack..............................$5.99 6050 Hose to nipple adapter, 1/8 NPT male to -6 hose barb, sold each......................................................$3.99 Goodridge All Black 210 Oil Line Kits All black oil line kits for V-Twins. Featuring our premium black braided oil hose. Hose has outer fabric braided cover with stainless braided core, coated with a neoprene inner lining. Kits ship complete with black anodised hose clamps. 6004* 6 ft 210 Oil Line Kit................................ $78.99 6005** 12ft 210 Oil Line Kit............................... $2.99 6006 210 Black Braided Oil Hose, 6ft...................... $47.99 6007 210 Black Braided Oil Hose, 12ft..................... $99.99 6008 3/8 Black Hose Finishers - 6 Pak..................... $31.99 6009 3/8 Black Hose Finishers - 10 Pak.................... $47.99 *Contains 6 ft of 210 hose and 4ea Black Hose Finishers **Contains 12 ft of 210 hose and 8ea Black Hose Finishers ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES 260530 CHASSIS Goodridge Custom Stainless Steel Oil Line and Fittings Custom oil lines are made simple with Goodridge s new do-ityourself reusable oil line components. This new system utilizes the same chrome steel fittings Goodridge is known for, but in a userfriendly format that allows you to make your own kit. These ground breaking fittings are coupled with their stainless steel braided PTFE lined hose and can be used to assemble oil line kits for virtually any Big Twin on the road. 610250 12Ft roll 6 stainless Teflon hose.......................$107.99 610251 Chrome oil tank stub fitting...........................$40.99 610252 Chrome straight oil fitting 1/8 NPT.....................$30.99 610254 Chrome 90 degree oil fitting 1/8 NPT...................$37.99 Stainless Steel Braided Hose Sold in 25 ft. rolls. 260530 1/4" ID x 25....................................... $79.99 260532 5/16" ID x 25...................................... $87.99 260534 3/8" ID x 25....................................... $99.99 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE www.customchrome.com.57
KEEP YOUR COOL EVEN IN STOP AND GO TRAFFIC UltraCool Oil Cooling Systems Stop Overheating in Stop-n-Go Traffic Excessive heat build up leads to loss of performance, shortened engine longevity and discomfort for the rider Powerful Dual 90 CFM Fans Built in thermal switch automatically turns fans on at 210 degrees to maintain engine temperature Top Quality Construction and Components All steel housing, 304 stainless braided oil lines, IP55 rated Fans, Solid aluminum custom oil adapter, 17 Row heat exchanger* SEE DETAILS ON PAGE.47 *Various model specific systems available - See fitment and part numbers on page.47.58 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.