SPORTS LIGHTING SYSTEM DESIGN GUIDE SPORTS FLOOD A NEW TEAM WITH THE EXPERIENCE OF A PRO.

SPORTS LIGHTING SYSTEM DESIGN GUIDE SPORTS FLOOD A NEW TEAM WITH THE EXPERIENCE OF A PRO www.americansportslighting.com 2

A NEW TEAM WITH THE EXPERIENCE OF A PRO We are proud to introduce the American Sports Lighting Plug-n-Play System. The Plug-n-Play System is complete from the ground up, including poles from 40 to 120, service platforms, cross arms, pre-wired capabilities, and a remote ballast system. The Plug-n-Play System features the Day- Brite League Lighter floodlight and the new, specification grade, PM2 luminaire. Now any outdoor field, from Baseball to Volleyball recreational to professional can be effectively and economically lit with the Plug-n-Play System. The American Sports Lighting Team makes it easy! With answers to a few basic questions, American Sports Lighting will layout, specify, price, and build a complete system that will meet a project s performance and budget requirements, no matter how large or small. Though newly introduced to the game, American Sports Lighting brings together people with decades of experience and knowledge in sports lighting. Let American Sports Lighting put its unique blend of youthful enthusiasm and dedicated experience to work for you today! The American Sports Lighting Team is ready to provide you with the following information: Application Layout Complete layouts for any outdoor field, including point by points and aiming diagrams. Specifications Complete and detailed specifications for everything from the anchor bolts to the top of the pole. Bill of Materials Clear and concise bills for easy ordering and mistake-free identification on the job site. Quotations Exact pricing to the bill of materials, including any accessories. Quality Components High-quality, durable products delivered directly to the job site complete, correct and on-time. SELECTING THE PLUG-N-PLAY SYSTEM Answers to these few basic questions, which can be easily determined from information in the next few pages, will ensure the American Sports Lighting Plug-n-Play System is properly built for each field: Determine Project Specifics What type of field? What s the level of play (recreational, high school, etc.)? Level of play determines light levels, which helps to determine the type and quantity of luminaires. Are there any site considerations (pole positioning, light trespass, height restrictions, etc.) Determine Pole Mounting Choose from three convenient mountings: anchor base, stub base or direct embed. Determine Luminaire Mounting Style Service Platforms side or top mount Cross Arms side or top mount Determine Installation Plug-n-Play System to be wired on-site? American Sports Lighting to pre-wire for easy plug and play installation Remote Ballast enclosure with pre-wired electrical components; shipped ready for mounting to the pole on-site. 2 Now, let the American Sports Lighting Team take it from here!

CLASS OF PLAY CLASS OF PLAY FOOTBALL SPECTATOR FACILITIES SOCCER SPECTATOR FACILITIES FOOTCANDLES AVERAGE MAINTAINED I PROFESSIONAL ABOVE 5,000 100 COLLEGES II COLLEGES 5,000 OR LESS 50 III NONE 30 TRAINING FACILITIES ELEMENTARY SCHOOLS AMATEUR LEAGUES IV TRAINING FACILITIES SOCIAL 20 ELEMENTARY SCHOOLS RECREATIONAL NON-COMPETITIVE FOOTCANDLES AVERAGE MAINTAINED II COLLEGES 5,000 AND MORE 50 SEMI-PRO PROFESSIONAL AMATEUR LEAGUES SPORTS CLUBS III TRAINING FACILITIES NONE 30 ELEMENTARY SCHOOLS AMATEUR LEAGUES RECREATIONAL SOCIAL 20 IV ELEMENTARY SCHOOLS RECREATIONAL RECREATIONAL FOOTCANDLES CLASS OF SPECTATOR AVERAGE PLAY FACILITIES MAINTAINED INFIELD OUTFIELD I MAJOR LEAGUES ABOVE 5,000 150 100 COLLEGES & SEMI-PRO II AAA & AA 5,000 OR LESS 100 70 SEMI-PRO & COLLEGES AMATEUR LEAGUES III C, D & SEMI-PRO LESS THAN 50 30 5,000 TO AMATEUR, MUNICIPAL NONE & LITTLE LEAGUES TRAINING FACILITIES ELEMENTARY SCHOOLS CLASS OF PLAY TENNIS SPECTATOR FACILITIES FOOTCANDLES AVERAGE MAINTAINED I INTERNATIONAL/NATIONAL 5,000 AND MORE 100 PROFESSIONAL COLLEGES SPORTS CLUBS II COLLEGES 5,000 OR LESS 60 SPORTS CLUBS AMATEUR LEAGUES III BASEBALL AMATEUR LEAGUES NONE 40 ELEMENTARY SCHOOLS IV ELEMENTARY SCHOOLS SOCIAL 30 RECREATIONAL RECREATIONAL TYPICAL APPLICATIONS AND LIGHT LEVELS SOFTBALL BASKETBALL FOOTCANDLES CLASS OF SPECTATOR AVERAGE PLAY FACILITIES MAINTAINED INFIELD OUTFIELD III SEMI-PRO/ LESS THAN 5,000 50 30 COLLEGE TO NONE IV HIGH SCHOOL NONE 30 20 RECREATIONAL CLASS OF PLAY SPECTATOR FACILITIES FOOTCANDLES AVERAGE MAINTAINED I AMATEUR LEAGUES NONE 30 ELEMENTARY SCHOOLS II RECREATIONAL 5,000 OR LESS 20 3

PM2 DAY-BRITE PRO-MAX 2 SPORTS FLOODLIGHT The high performance Day-Brite PM2 features a uniquely designed lamp and reflector system that, by positioning the lamp vertically, maximizes lamp performance for efficient lighting of sporting fields from recreational to professional levels, indoors or out. Precision spun and anodized aluminum two-part reflector system. Upper reflector is mounted directly to the housing, while the lower reflector latches to the upper for easy installation and lamp replacement. Impact-resistant tempered glass lens is silicone sealed to the lower reflector. DIMENSIONS 26-1/2" (673.1 mm) NEMA Type 3, 4, 5, and 6 beam patterns 16-1/2" 1/2 (419.1 mm) (152.4 mm) 6" 5-3/4" (146.1 mm) 30" (762 mm) Heavy-duty die cast aluminum housing positions electrical components for cool operation, allowing installations indoors or out. Formed steel upper housing protects internal components. 23-1/2" (596.9 mm) HOLES SIZED FOR 3/8" HEX BOLT 9-3/4" MTG. CENTER (247.7 mm) Unique integral carrying handle is contractorfriendly and facilitates fast and easy, two-bolt installation with the ballast weight centered directly over cross arm or platform. Socket housing and built-in protractor provide full range of motion for accurate, repeatable aiming. Reflector lock ensures precise repositioning after relamping. Revolutionary socket and upper reflector design positions the lamp vertically, maximizing arc tube lumen output and life compared to horizontal-positioned lamp systems. UL 1598 Listed suitable for wet location and up to 40 C ambient for all wattages listed. EPA = 3.2 ft. 2 WT = 65-70 lbs. 23-1/2" 2" (596.9 mm) 10-1/4" (260.4 mm) 27-3/8" (695.3 mm) BALLAST ASSEMBLY OPTICAL ASSEMBLY PM2 FAMILY LAMP SOURCE UPPER REFLECTOR PM2 M Metal Halide S High Pressure Sodium P Pulse Start (Ballast option must also be specified) BLANK Type 3, 4 or 5 N6 Type 6 WATTAGE 400 400 10X 1000 15X 1500*(1) Footnotes: *(1) Metal Halide only. *(45) Use with 208, 240 and 480 volt. *(46) Use with 120, 277 and 347 volt. VOLTAGE 12 120 20 208 24 240 27 277 48 480 MT 120/208/240/277 General Notes: Mogul base lamp only. All options are factory installed. All accessories are field installed. Warning: Refer to and follow the lamp manufacturer s warnings and instructions. OPTIONS LP Lamp with fixture WDF Wired Double Fuse*(45) WSF Wired Single Fuse*(46) PWC3 3 Pre-Wired Connector PWC6 6 Pre-Wired Connector FINISH BLANK Black BR Bronze GY Gray PM2 FAMILY REFLECTOR OPTIONS PM2 3LV Internal Louver Type 3 4LV Internal Louver Type 4 5LV Internal Louver Type 5 6LV Internal Louver Type 6 REMOTE HOUSING PM2 FAMILY DISTRIBUTION N3 Type 3 N4 Type 4 N5 Type 5 N6 Type 6 REM HOUSING PM2 REM Remote BLANK Type 3, 4, 5 N6 Type 6 UPPER REFLECTOR 4 For more information, i consult your Sports System Specification c i Binder or go to www.americansportslighting.com. ing.com. Data subject to change without notice

180 165 150 135 120 105 90 75 60 45 NADIR 0 30 15 75 60 45 30 15 0 15 30 45 60 75 90 Die cast aluminum housing stands up to extreme environments. Easy access to ballast compartment. The Day-Brite League Lighter is the choice for lighting recreation- LGL Double Slant 2 heatsinked ballast for cooler ballast operation and longer component life. Dark bronze polyester powder finish on housing is corrosion and UV resistant. UL 1598 Listed for wet location at 25 C. EPA = 2.4 ft. 2 WT = 61-68 lbs. Lamp stabilizer grips lamp envelope, centering and stabilizing lamp. Rugged reflector constructed of heavy gauge, precision spun and anodized aluminum. al or competitive facilities requiring an efficient and economical luminaire. Hinged tempered glass lens with heavy-gauge galvanized steel frame. Door hinges downward for convenience. NEMA Type 2, 3, 4, 5, and 6 beam patterns. SPORTS FLOOD LEAGUE LIGHTER TM FLOODLIGHT DIMENSIONS BALLAST ASSEMBLY OPTICAL ASSEMBLY LGL FAMILY LAMP SOURCE LGL M Metal Halide S High Pressure Sodium OPTIONS CUL UL Listed to meet CSA standards WDF Wired Double Fuse *(45) WSF Wired Single Fuse *(46) PT3 3' Cord PT6 6' Cord PWC3 3' Pre-wired Connector PWC6 6' Pre-wired Connector WATTAGE DESIGNATION 1M 1000-1650w Metal Halide 4M 400w Metal Halide 1S 1000w High Pressure Sodium 4S 400w High Pressure Sodium 3" 7/16" DIA. 25/32" DIA. 5-5/16" (134.9 mm) 1" 1-1/4" WATTAGE VOLTAGE 400 400 10X 1000 15X 1500 *(1) 16X 1650 *(1) 12 120 20 208 24 240 27 277 34 347 48 480 MT 120/208/240/277 TYPE REFLECTOR BEAM SPREAD LLG General Duty LLH Heavy Duty (Protective outer aluminum shroud installed over inner reflector) N2 2Hx2V N3 3Hx3V N4 4Hx4V N5 5Hx5V N6 6Hx6V GENERAL E DUTY REFLECTOR R HEAVY DUTY SHROUD 20-3/4" (527.1 mm) m Footnotes: *(1) Metal Halide only. *(45) Use with 208, 240 and 480 volt. *(46) Use with120, 277 and 347 volt. General Notes: Mogul base lamp only. All options are factory installed. All accessories are field installed. Warning: Refer to and follow the lamp manufacturer s warnings and instructions. Accessories (order separately) LLPSF - Post Top Slipfitter for League Lighter VSLL - Vandal Shield League Lighter VLL - Visor for League Lighter LLCL - Concentric Louver (internal) LLCHL - Concentric Half Louver (internal) WGLL - Wire Guard League Lighter 7" (177.8 mm) m) 16-3/8" (415.9 mm) 19-1/8" 1/8" (485.88 mm) For more information, i n consult your Sports System Specification i Binder or go to www.americansportslighting.com. w.ameri rtsligh ting.com m. Data a subject to change without notice 5

SLT SPORTS SYSTEM POLES American Sports Lighting poles are constructed from heavy-duty, single ply sheet steel. Each shaft is formed into a tubular shape with longitudinal welds, producing very strong poles that will withstand years of abuse from the elements without fail. The poles have been carefully engineered and analyzed to perform in wind speeds ranging from 70 to 120 m.p.h. plus a 1.3 wind gust factor. Each of the American Sports Lighting poles, in either anchor base, stub base or direct embed, can accommodate any of the cross arms or platforms, as well as the remote ballast or pre-wired system enclosures. The pole shafts are available galvanized or polyester powder coated for protection from the elements. ANCHOR BASE Anchor base is the traditional mounting method for steel sports system poles. Anchor bolts are cast into a poured concrete foundation, and the foundation is strengthened with steel reinforcing bars (foundation and steel reinforcement by others). Properly sized anchor bolts, designed for each pole size, and positioning templates are provided with each pole to ensure accurate positioning of the pole. HANDHOLE(S) AND COUPLING(S) AS REQUIRED FOR BRACKETS AND FIXTURES TOP SHAFT SLIP TOTAL MIDDLE SHAFT SLIP BASE SHAFT REINFORCED HANDHOLE 18" STUB BASE The unique Stub Base dramatically simplifies on-site installation. The Stub Base has an integrally welded flange plate that mates with the pole structure. The base is dropped into the ground, stubbed out for wiring, and then concrete is poured around it to secure it structurally (concrete supplied by others). The pole and luminaire structure is simply set onto the flange and bolted into place. Slotted bolt holes on both flange plates allow for any fine-tuning in aiming of the assembly. HANDHOLE(S) AND COUPLING(S) AS REQUIRED FOR BRACKETS AND FIXTURES TOP SHAFT SLIP TOTAL MIDDLE SHAFT SLIP REINFORCED HANDHOLE BASE SHAFT 18" GROUND LEVEL REFER TO STUB BASE DETAIL 6 For more information, consult your Sports System Specification Binder or go to www.americansportslighting.com. Data subject to change without notice

DIRECT EMBED Direct embed is yet another traditional method for installing sports lighting poles. Each pole height has been engineered with a pre-determined embedding depth. Once the lighting structure has been assembled, the pole is lifted and dropped into the ground at its pre-determined depth. The hole is then back-filled with concrete to secure the entire structure (concrete supplied by others). TOTAL HANDHOLE(S) AND COUPLING(S) AS REQUIRED FOR BRACKETS AND FIXTURES MIDDLE SHAFT SLIP TOP SHAFT SPORTS FLOOD SLIP REINFORCED HANDHOLE BASE SHAFT 18" GROUND LEVEL EMBED DEPTH REFER TO DIRECT EMBED DETAIL ORDERING MATRIX SLT FAMILY WIND LOAD RATING FINISH SLT WL1 WL2 WL3 WL4 WL5 WL6 WL7 WL8 WL9 WL10 WL11 WL12 WL13 WL14 WL15 GV Galvanized BZ Bronze Powder BK Black Powder WT White Powder GY Gray Powder HEIGHT 040 40 feet 050 50 feet 060 60 feet 070 70 feet 080 80 feet 090 90 feet 100 100 feet 110 110 feet 120 120 feet BASE STYLE AB Anchor Base SB Stub Base EM Direct Embed For more information, i n consult your Sports System Specification i Binder or go to www.americansportslighting.com. w.ameri rtsligh ting.com m. Data a subject to change without notice 7

CAG American Sports Lighting System top-mount platforms mount directly to the top of the pole structure and are secured PLATFORM-TOP MOUNT with bolts through mating plates. They are constructed from heavy-duty tubular steel with strong mesh flooring on the catwalk. Each provides 42" high rails to ensure safe mobility for maintenance personnel during routine servicing. When top-mount platforms are specified, steps and safety cable will be added to the poles to facilitate access to the platforms. CAG-TT-06 EPA = 4.90 Weight = 512 CAG-TT-15 EPA = 11.30 Weight = 800 CAG-TT-09 EPA = 6.29 Weight = 550 CAG-TT-18 EPA = 13.82 Weight = 855 CAG-TT-12 EPA = 8.79 Weight = 702 CAG-TT-21 EPA = 16.32 Weight = 950 CAG-TT-24 EPA = 18.83 Weight = 1060 ORDERING MATRIX CAG FAMILY CRA - Cross Arm Top Mount TT FRAME CONSTRUCTION TUB - Tubular Top Mount NO. of FIXTURES 06 09 12 15 18 21 24 FINISH GV Galvanized BZ Bronze Powder BK Black Powder WT White Powder GY Gray Powder PRE-WIRED OPTION ES1 Pre-Wired System Distribution and Disconnect Box at Pole Base ES2 Pre-Wired System Distribution Box at Pole Top, Disconnect Box at Pole Base 8 For more information, i consult your Sports System Specification c i Binder or go to www.americansportslighting.com. ing.com. Data subject to change without notice

American Sports Lighting System side-mount platforms secure to the side of the pole CAG CAG-SA-04 EPA = 9.33 Weight = 245 CAG-SA-08 EPA = 12.35 Weight = 290 CAG-SA-16 EPA = 29.68 Weight = 680 CAG-SA-12 EPA = 21.61 Weight = 515 structure with heavy-gauge U-bolt brackets. They are available in either tubular or angular steel versions. Both are constructed from heavy-duty steel with strong mesh flooring on the catwalk. Each version provides safety features such as kick rails, helping to ensure that tools aren't accidentally knocked off of the platforms. When side-mount platforms are specified, steps and safety cable will be added to the SPORTS FLOOD PLATFORM-SIDE MOUNT CAG-ST-04 EPA = 5.67 Weight = 378 CAG-ST-08 EPA = 7.18 Weight = 420 CAG-ST-12 EPA = 13.21 Weight = 609 poles to facilitate access to the platforms. CAG-ST-16 EPA = 18.85 Weight = 768 ORDERING MATRIX CAG ST FAMILY CRA - Cross Arm Side Mount NO. of FIXTURES 04 08 12 FRAME CONSTRUCTION 16 ST - Side Mount Tubular Steel SA - Side Angle Mount* FINISH GV Galvanized BZ Bronze Powder BK Black Powder WT White Powder GY Gray Powder PRE-WIRED OPTION ES1 Pre-Wired System Distribution and Disconnect Box at Pole Base * Pre-wiring is not available with SA type. ES2 Pre-Wired System Distribution Box at Pole Top, Disconnect Box at Pole Base For more information, i n consult your Sports System Specification i Binder or go to www.americansportslighting.com. w.ameri rtsligh ting.com m. Data a subject to change without notice 9

League Lighter Sports System CRA top-mount cross arms mount directly to the top of the pole CROSS ARM-TOP MOUNT structure and are secured with bolts through mating plates. They are constructed from heavy-duty tubular steel and offer a great range of mounting quantities from 2 to 18 luminaires. The tubular construction also makes it an excellent choice when specifying pre-wired or remote wired systems. CRA-TT-02 EPA = 1.56 Weight = 64 CRA-TT-08 EPA = 6.70 Weight = 210 CRA-TT-04 EPA = 2.97 Weight = 105 CRA-TT-06 EPA = 4.39 Weight = 146 CRA-TT-10 EPA = 8.12 Weight = 251 CRA-TT-12 EPA = 9.54 Weight = 292 CRA-TT-14 EPA = 12.14 Weight = 362 CRA-TT-16 EPA = 13.55 Weight = 404 CRA-TT-18 EPA = 14.97 Weight = 445 ORDERING MATRIX CRA FAMILY CRA - Cross Arm Top Mount TT FRAME CONSTRUCTION TT - Top Mount Tubular Steel NO. of FIXTURES 02 04 06 08 10 12 14 16 18 FINISH GV Galvanized BZ Bronze Powder BK Black Powder WT White Powder GY Gray Powder PRE-WIRED OPTION ES1 Pre-Wired System Distribution and Disconnect Box at Pole Base ES2 Pre-Wired System Distribution Box at Pole Top, Disconnect Box at Pole Base 10 For more information, i consult your Sports System Specification c i Binder or go to www.americansportslighting.com. ing.com. Data subject to change without notice

Sports System side-mount cross arms secure to the side of the pole structure with CRA CRA-ST-02 EPA = 0.90 Weight = 41 CRA-ST-05 EPA = 3.02 Weight = 103 CRA-SA-02 EPA = 1.35 Weight = 31 CRA-ST-03 EPA = 1.61 Weight = 62 CRA-SA-03 EPA = 2.41 Weight = 45 CRA-ST-06 EPA = 3.73 Weight = 123 CRA-ST-04 EPA = 2.31 Weight = 82 CRA-SA-04 EPA = 3.47 Weight = 59 heavy-gauge U-bolt brackets. They are available in either tubular or angular steel versions. Both are constructed from heavy-duty steel and are an excellent choice when small quantities of luminaires are required. Also, they can be used in conjunction with top-mount cross arms or platforms to economically add luminaire quantities. SPORTS FLOOD CROSS ARM-SIDE MOUNT CRA-SA-05 EPA = 4.53 Weight = 74 CRA-SA-06 EPA = 5.60 Weight = 89 ORDERING MATRIX CRA ST FAMILY CRA - Cross Arm Side Mount NO. of FIXTURES 02 03 04 FRAME CONSTRUCTION 05 06 ST - Side Mount Tubular Steel SA - Side Angle Mount* FINISH GV Galvanized BZ Bronze Powder BK Black Powder WT White Powder GY Gray Powder PRE-WIRED OPTION ES1 Pre-Wired System Distribution and Disconnect Box at Pole Base * Pre-wiring is not available with SA type. ES2 Pre-Wired System Distribution Box at Pole Top, Disconnect Box at Pole Base For more information, i n consult your Sports System Specification i Binder or go to www.americansportslighting.com. w.ameri rtsligh ting.com m. Data a subject to change without notice 11

ES1 PRE-WIRED SPORTS SYSTEM American Sports Lighting 12 Degrees Left 44 Degrees Down Reflector: 3x3 X-Coordinate: 25 Y-Coordinate: 15 American Sports Lighting Order No. 3-Pin Female Receptacle Widely-accepted universal component in the luminaire industry. Mating 3-pin male connector factory-installed in luminaire. Receptacle leads are hardwired to power/drop cord. Factory Pre-Determined Aiming Aiming layouts coordinated with Application Team. Customized label provided at each luminaire location. Pre-determined luminaire aiming coordinates. Label displays luminaire type and luminaire design. Power/Drop Cord Factory installed/wired to each 3-pin female receptacle. Cut to the proper length for the pole structure. Quick-connect plug mates with corresponding plug in distribution box. Distribution and Disconnect Junction Box Completely pre-wired at the factory. Multi-pin coordinator is hardwired to fuse block to accept mating drop cord. Individual dual fusing provided for each luminaire. Factory installed disconnect switch. Mounting hardware provided for attachment to pole. ES1 SPECIFICATION FEATURES Multi-circuit systems available Configured for any voltage & phase Factory Pre-set aiming coordinates Standard components include cages and cross arms Designed to withstand any wind velocity Pole heights can extend to more than 150 feet SYSTEM ES1 Finishes include galvanizing, and power coat paint Factory Pre-wired Bottom-mounted Disconnect/ Distribution Box TOP CONNECTION Individually fused for each luminaire JUNCTION BOX MOUNTING 12 For more information, consult your Sports System Specification Binder or go to www.americansportslighting.com. Data subject to change without notice

American Sports Lighting 12 Degrees Left 44 Degrees Down Reflector: 3x3 X-Coordinate: 25 Y-Coordinate: 15 American Sports Lighting Order No. 3-Pin Female Receptacle Widely-accepted universal component in the luminaire industry. Mating 3-pin male connector factory-installed in luminaire. Receptacle leads are hardwired to power/drop cord. Factory Pre-Determined Aiming Aiming layouts coordinated with Application Team. Customized label provided at each luminaire location. Pre-determined luminaire aiming coordinates. Label displays luminaire type and luminaire design. Disconnect Box Box is UL-listed. Mounts to base of the pole with supplied hardware. Serves as connection between power and drop from the distribution box. Main in-line fuses installed at the factory. Distribution Junction Box Each luminaire lead is hardwired to distribution block. Box is factory-installed on cross arm. Drop-cord is hardwired to the distribution block at the factory. ES2 SPORTS FLOOD PRE-WIRED SPORTS SYSTEM SYSTEM ES2 Top-mounted Distribution Box Factory Pre-set aiming coordinates SPECIFICATION FEATURES Multi-circuit systems available Configured for any voltage & phase Standard components include cages and cross arms Designed to withstand any wind velocity Pole heights can extend to more than 150 feet Finishes include galvanizing and powder coat paint ES2 Factory Pre-wired TOP DISTRIBUTION BOX Bottom-mounted Disconnect Box DISCONNECT BOX For more information, consult your Sports System Specification Binder or go to www.americansportslighting.com. Data subject to change without notice 13

RBE REMOTE BALLAST SYSTEM The American Sports Lighting Plug-n-Play System remote enclosure provides added application flexibility along with simplified system maintenance. Each enclosure is NEMA 3R rated for maximum weatherability.this system is UL Listed. All electrical components are pre-wired at the factory with mating connectors to each luminaire, allowing for easy plug & play installation. Drop cables include Kellums cord grips for safe, secure feed-through up the pole. Unique design allows electrical components to run cool, ensuring long system life. RBE-1 SYSTEM Factory Pre-Wired Simplified Maintenance Plug & Play Installation NEMA 3R rated enclosure is constructed of galvaneal steel and finished in a durable polyester powder coat paint. Enclosure can house electrical components for up to eight luminaire. Enclosure mounts quickly and easily to any American Sports Lighting System pole. Polyethylene jacketed 17 conductor, 14 Ga. wire rated at 600V. Each luminaire individually fused. Wiring capabilities for all voltages in single or three phase systems. The American Sports Lighting System remote enclosure provides added application flexibility along with simplified system maintenance. Each enclosure is NEMA 3R rated for maximum weatherability. UL listed. ORDERING MATRIX RBE FAMILY RBE VOLTAGE 12 120 Volt 20 208 Volt 24 240 Volt 27 277 Volt WATTAGE 10X 1000 watt 15X 1500 watt 16X 1650 watt BALLAST QUANTITY 1 1 Ballast 2 2 Ballasts 3 3 Ballasts 4 4 Ballasts 5 5 Ballasts 6 6 Ballasts 7 7 Ballasts 8 8 Ballasts 14 For more information, if i consult your Sports System Specification c i Bid Binder or go to www.americansportslighting.com. Lihin. Data subject to change without notice

SPORTS FLOOD Visit our web site at www.americansportslighting.com 2001 Beach Street, Suite 800, Fort Worth, Texas 76103 Phone: 1-800-433-7753 Fax: 817-926-5003 E-mail: info@americansportslighting.com American Sports Lighting reserves the right to make changes without notice. 2007 Whitco Poles. For more information, consult your Sports System Specification Binder or go to www.americansportslighting.com. Data subject to change without notice 15

2SPORTS FLOOD Visit our web site at www.americansportslighting.com 2001 Beach Street, Suite 800, Fort Worth, Texas 76103 Phone: 1-800-433-7753 Fax: 817-926-5003 E-mail: info@americansportslighting.com American Sports Lighting reserves the right to make changes without notice. 2007 Whitco Poles, Inc.