Lighting Systems Argus-7
|
|
- Felix Banks
- 5 years ago
- Views:
Transcription
1 Page 1 of (3.5cm) 1.7 (4.3cm) 4 5 Rectilinear (4.6cm) Extruded Linear Louver.5 (.64cm) 5. (1.7cm) 9. (.86cm) 1 1. (3.5cm) 1.7 (4.3cm) 4 5 Tapered (4.6cm).75 (.7cm) Feature Specifications Electrical Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off. Connections: Wiring is via 18 gauge wire. All electrical connections for standard configurations are plug-and-play via 6-wire cannon plug connections. Connections are seated in end castings of fixtures, allowing for simultaneous mechanical/ electrical coupling. Connectors are male/female therefore modules are directional, starting from the power feed end set. Male Female All static ballasts have the following features: Electronic Class A sound rating High Power Factor Metal can 5. (1.7cm) (6.35cm) Emergency Battery Pack: 9 minute operation, 7 lumens for 54W and 5 lumens for 8W. EM pack fixtures ship with a 4th wire as standard. Use 4 wire power feed end set and order a 4th through wire in all non-em pack fixtures in that run. Dimming (Standard Control Option): Advance Mark 1 standard (no additional wires required) for T5HO fixtures. T5HO lamps can be dimmed down to 1%. T5 (non-ho) lamps use ULT Super-Dim 1 ballasts and can be dimmed down to 1%. A 5-wire power feed will be required for T5 (non-ho) dimming. Features 1. Housing: High purity extruded aluminum, a portion from recycled material. Mitered end caps [3" (7.6cm) rectilinear end cap and 3.69" (6.37cm) tapered end cap]. No exposed fasteners or hardware.. ing: Two T5 fluorescent lamps per 4-foot section. s not included. 3. Reflector: Precision die-formed premium anti-iridescent, highly reflective aluminum. 4. : Electronic. Meets ANSI starting, end-of-life protection and sound rating specifications. Low THD. Use ballasts with maximum height of 1.7" (4.3cm) and maximum depth of 1." (3.5cm). 5. Shielding: Extruded aluminum with die formed linear louver slots, finished to match housing. Mountings Cable suspension is on and centers and consists of a 4-1/" (11.43cm) diameter canopy finished white enamel. A 1/16" (.16cm) diameter stainless steel aircraft cable accomplishes suspension and is adjustable from 1" (3.48cm) to 36" (91.44cm). Power feed is 18-gauge SJT white jacket. For special circuiting consult factory. For mounting locations on a wall mounted fixture type, see specification sheet Argus-6 to Argus-33. Powder coated, baked enamel, white, black or aluminum, as specified. Custom colors available, consult factory. Labels UL, cul and I.B.E.W. Power Tray: Code-gauge, die-formed steel, pre-paint white enamel finish. Accepts ballasts up to 1.7 (4.3cm) wide by 1. (3.5cm) high. Power Feeds: Standard 18/3 power feed is rated for 1 amps. X4 power feed is 18/4 and is rated for 7 amps. Observe amperage limitations and provide additional Intermediate Power Cables, as required. When providing an additional power feed, the through wiring from the previous module must be disconnected from the cannon plug and capped. Dual Switching and Tandem Switching: Dual switched and Tandem switched fixtures ship with a 4th wire as standard. Use 4 wire power feed. Job Name: Cat. No.: (s): Notes:
2 Page of 5 Module Ordering Information Family A A = Argus Mounting P = Pendant W = Wall Series R = Rectilinear T = Tapered ing & Distribution = -, Open Top Shielding E E = Extruded Linear Louver See Chart Below Z = s not installed 4 = 4-Foot 8 = 8-Foot Voltage 1 = 1V = 77V U = UNV (1V-77V) 3 = 347V A = Aluminum On-Board Control 1 ST ST = Standard (none) (Blank) 4 = 4 through wires C = Dust Cover E = EM Pack S = Step Dim T = Tandem Switch 3 1 Standard fixtures ship with no On-Board Control systems. For explanation of On-Board Control features, see specification sheet: Argus-Control. For step dimming, use ballast F or G and option S. Step dimming is not available in 4' fixtures with an odd number of lamps. Order 4 wire power feed. 3 Tandem Switch available in 8-foot fixtures only. Tandem switch available in standard control only. NOTE: Voltage 1 or must be selected when using Dimming or EM Packs. Ordering Instructions 1. Determine run length.. Order the appropriate number of MODULES for the complete run. 3. Order one POWER FEED END SET for each run. 4. Order one CABLE ASSEMBLY per MODULE minus one per run. 5. For runs that exceed conductor ampacity ratings order the appropriate number of SINGLE CABLE & CORD SETS. Specifications Code Type Factor Start Type THD % F T5 1. Program <1 F* T5 Step Dim.95 Program <1 G T5HO 1. Program <1 G* T5HO Step Dim.95 Program <1 I Dim T5 1./.1 Program <1 J Dim T5HO 1./.5 Program <1 Other BF available, consult factory * For step dimming, use ballast F or G and option S. Feature T = Tandem Switching One- Plan View A B Tandem Switch fixtures ship with a 4th wire. Be sure to order the appropriate quantity of wires in the power feed. E = Emergency Battery Pack Hot A/C B. Hot A/C B. Common Unswitched EM B. Common Wall Switch Switched EM B. Standard Emergency wiring is to have Battery Pack operating a single lamp. All EM fixtures are wired as switched and include 4th through wire for the wall switch (see diagrams). All non-em pack fixtures and power feeds in that run should be ordered to include a dedicated 4th through wire to carry the hot power all the way through the run to the EM pack. (Option 4)
3 Page 3 of 5 Power Feed End Set Ordering Information End Set EC 36 EC = End Cap Set Power Feed End Set Order one per continuous run 36 = 36" A = Aluminum Blank = none 4 = 4 Wires 5 = 5 Wires 6 = 6 Wires Ceiling Grid Kit (For use when cable assemblies are being mounted directly on up to 15/16" inverted tee or 9/16" slot tee.) Both CGKP and CGK ship with two types of clips (inverted and slot T). For mounting fixtures directly to the T grid, order one CGKP per power suspension point and one CGK per non- powered suspension point. The CGKP will include a special canopy with flex coupler, grid clips and additional clips to mount the junction box to the top of the grid nearby. J-Box and flex conduit provided by others. L W Rectilinear L - 9. (.86cm) W - 3 (7.6cm) H (4.6cm) H L W Tapered L (6.35cm) W (9.1cm) H (4.6cm) H Ceiling Grid Kit, Power: CGKP Ceiling Grid Kit: CGK Cable/Cord Assembly Ordering Information Family AP C = Cable CC = Cable with Cord = 36" Blank = none 4 = 4 Wires 5 = 5 Wires 6 = 6 Wires Corner Block Ordering Information* Corner Dimension 1 = 1" 4 = 4" 1" (3.48cm) Angle 9 9 = 9 A = Aluminum See NOTE Below 4" (6.96cm) 1" Corner Cable Assembly Order one per fixture, minus one per run. Cable/Cord Assembly When required for supplemental power feed. 4" Corner Supplemental Power Feed Requirements Consult and data to determine input watt requirements for ballast used on project to determine loading for each run. To determine ampacity, multiply the total number of ballasts by the input wattage per ballast and divide the total watts by the system voltage. 1 Amps for 3-wire end sets, 7 Amps for 4-wire and 5-wire end sets, maximum. Because most ceilings are white, all canopies ship as white unless specifically ordered otherwise. Regardless of canopy or end cap finish, power cord will be 18-gauge SJT white jacket unless specifically ordered otherwise. Inline Joiner Block Ordering Information* 4 = 48" 8 = 96" A = Aluminum See NOTE Below * will be required at each joint in the run. For suspension ordering purposes, consider each corner blocks and inline joiner as another fixture in the run. Corner blocks and inline joiners are unlit. NOTE: Argus Corner Blocks and Inline Joiner Blocks ship with the maximum # of wires, so they will work in any wiring configuration. Corner Blocks are field reversible.
4 Page 4 of 5 Sample Fixture s & Mounting Locations 4-Foot Indivdual 8-Foot Individual 1-Foot Run 4-Foot 8-Foot Module Module End Set Cable Joiner 4-Foot Indv Foot Indv Foot Run Foot Run 1 1 -Foot Run Foot Run Foot Run -Foot Run 4-Foot Run NOTE: For overall run length, combine mounting distance and end cap length dimensions. Rectilinear end cap length: 3" (7.6cm) each. Tapered end cap length: 3.69" (9.37cm) each. Example 1: Mounting distance for a 4-foot run is 48". The overall run length for rectilinear fixture is 54"=3"+48"+3" and for tapered fixture is 55.38"=3.69"+48"+3.69". Example : Mounting distances for a -foot run are 96", 96" and 48". The overall run length for rectilinear fixture is 46"=3"+96"+96"+48"+3" and for tapered fixture is 47.38"=3.69"+96"+96"+48"+3.69" Sample Pattern Corner Block APx49W 4" (6.96cm) 96" (43.84cm) 1" (3.48cm) Corner Block APx19W
5 Page 5 of 5 Performance Two- Fixture with Open Top Candlepower Curve Report No.: LLI187H.ies s: Philips -F54T5/835/HO Lumens: 5 Efficiency: 77.4 Cat. No.: APREGQ4UWST 5 C Rating Candlepower Zone Degree Candelas Room Cavity Ratio Coefficients Of Utilization % Effective Ceiling Cavity Reflectance % Wall Reflectance % Floor Cavity Reflectance Distribution Zone Lumens % % Luminaire and Ordering Combinations Design Type Factor (BF) THD (%) Rated Wattage Rated Output* Color (Kelvin) IES Output (Lumens) Input Watts Efficiency (lum/watt) Life (Hours) FM/FN/FO T5 1 <1 8 6 M-3 N-35 O Program FM/FN/FO T5 Step DIM.95 <1 8 6 M-3 N-35 O N/A Program GP/GQ/GR T5HO 1 < P-3 Q-35 R Program GP/GQ/GR T5HO Step DIM.8 <1 8 6 P-3 Q-35 R N/A Program GV/GW/GX T5HO 1 < V-3 W-35 X Program IM/IN/IO T5 DIM 1. /.1 <1 8 6 M-3 N-35 O-41 6 / / N/A Program JP/JQ/JR T5HO DIM 1. /.3 < P-3 Q-35 R-41 5 /15 63 / N/A Program JV/JW/JX T5HO DIM 1. /.3 < V-3 W-35 X /89 63 / N/A Program Start Type Notes: *5 C Rating T5, T5HO, T5 DIM and T5HO DIM data is per 1 lamp on a two lamp system at 77 VAC. T5 Step DIM data is per lamp on a two lamp system at 77 VAC. Data is based on Philips Advance Specifications. s are not included with fixture. Average Rated Life (Hrs) BF Program Start.88 BF Program Start Instant Start Hours Per Start Life Table using program start and instant start ballasts.
HP90 Recessed 2'X2' Fluorescent; T8, T5, T5HO or TT5
Page 1 of 5 Emergency Pack 1 5" (127mm) 24" (610mm) 2-1/2" (64mm) 2" X 2-1/2" Wiring access plate with (2) 7/8" dia. K.O.'s Ordering Information HP90 H9 Direct/Indirect Recessed Fluorescent Body Style
More informationVerve IV. Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic louver.
FLUORESCENT BAFFLE/LOUVER radial blade baffle flat blade baffle flat blade parabolic louver DIMENSIONAL DATA FEATURES Suspended linear direct/indirect fluorescent with radial or flat baffle or parabolic
More informationSeem 6. Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic.
Seem 6 FLUORESCENT GRID parabolic louver DIMENSIONAL DATA grid 5.53" 14.6mm FEATURES Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted
More informationSeem mm 4.50" 4.00" 101.6mm. Narrow 4" linear fluorescent allows for both individual or continuous runs.
FLUORESCENT recessed companion wall mount companion DIMENSIONAL DATA FEATURES Narrow 4" linear fluorescent allows for both individual or continuous runs. Frosted acrylic flush lens provides even illumination,
More informationNera. detail. fixture information. Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3 and 4 x4.
LED bottom detail inside lens detail white finish palladium finish 2016 DIMENSIONAL DATA FEATURES Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3
More informationES44-LED SERIES DIRECT OR INDIRECT HIGH EFFICIENCY LED - RECESSED, SURFACE, WALL OR SUSPENDED
ES44-LED SERIES DIRECT OR INDIRECT HIGH EFFICIENCY LED - RECESSED, SURFACE, WALL OR SUSPENDED PERFORMANCE CHARACTERISTICS Optical Efficiency: 90.5% max Lumens per watt: 180 max Lumen output: 2200Lm/ft
More informationRecessed. HP90 Fluorescent 1x4
Recessed HP90 Fluorescent 1x4 Project: Location: Cat.No: Type: Lamps: Notes: Qty: The Philips Day-Brite / Philips CFI HP90 Recessed Fluorescent combines a recessed contoured body with an enclosed linear
More informationBionic Perimeter Standard C o v e & P e r i m e t e r
Type Job Name Catalog Number Bionic Perimeter Standard C o v e & P e r i m e t e r 5 7 /16" 110mm 6 7 /16" 170mm 8 7 /16" 221mm Flush Regress 3" Regress ordering - BIO-PSTD (STANDARD) series/ style lamp
More informationRecessed. HP90 Fluorescent 2x4
Recessed HP90 Fluorescent 2x4 Project: Location: Cat.No: Type: Lamps: Notes: Qty: The Philips Day-Brite / Philips CFI HP90 Recessed Fluorescent combines a recessed contoured body with an enclosed linear
More information131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 131 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x.0l x 4.0Dp (0 x 1220 x 100) LAMP 1 or 2 lamp
More information003 3 foot foot RUN Nominal Length* * For actual lengths see
M125 Project: Type: Qty: Series Lamping Shielding Mounting Nominal Length Finish Voltage Options Series Lamping Shielding Mounting Nominal Length Finish Voltage Options M125 (M125/9 Direct) Multi-Mount
More informationseem 4 grid features dimensional data performance
grid seem features Narrow " aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted acrylic flush lens provides even illumination, high performance
More informationNotes: (1) not recommended with staggered lamping (2) Not available with T8 lamping.
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 3 5/8" 92mm 2 1/4 57mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH (FT)
More informationNotes: Indirect. 5 1/2" 140mm. 5 1/32 128mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct / Indirect Direct Indirect 5 1/2" 14mm 5 1/2" 14mm 5 1/2" 14mm SHOWN WITH LENS OPTION 5 1/32 128mm ORDERING CODE 5 1/32 128mm 5
More informationLINERO L_6A Suspended Linear
Project Name Date Type LINERO L_6 -/8 (28.6mm) -9/6 (39.7mm) -/8 (28.6mm) -3/6 (39.7mm) 6-9/6 (66.2mm) 6-7/8 (74.6mm) Key Features One piece die-formed 8 gauge steel housing Highly reflective die-formed
More information2 LED Designer Series
LED Designer Series When appearance is most important, TCP s LED Designer Series turns any location into something truly exceptional. Limitless options for the following applications: Offices Restaurants
More information131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x 48.0L x 4.0Dp (300 x 1220 x 100) LAMP 1 or 2 lamp
More informationApollo 8. lamping. patient bed pair example. 8" wide recessed patient bed light with exam function available in 2', 3' & 4' lengths.
FLUORESCENT RECESSED PATIENT BED LIGHT SYSTEM apollo 8 ambient only integral LED apollo 1 & 2 companion DIMENSIONAL DATA FEATURES 8" wide recessed patient bed light with exam function available in 2',
More information2 1 /8" 2 1 /8" Use guide below to order complete fixture runs from four feet to three-hundred feet in increments of four.
LIGHTDUCT DIMINUTIVE INDIRECT Pendant Mount - Modular AVAILABLE FIXTURES 6 X 2 Rounded LDM1-1 LDM1-2 LDM1-3 Housing AA 6063 T6 extruded aluminum forming a x rounded channel. Die-cast end plate attaches
More information98PF-P-I Perforated Pendant Indirect. Ordering Guide. Key Features 98-P-I-PF. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 98 9800 Housing Style PF Perforated Mounting P Pendant Fixture distribution I Indirect Row length (in feet) Enter in foot
More informationSDx Pendant Semi-Direct
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 18 SDx Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
More informationEDGE EX33 3 x 3 Suspended Direct Linear
Project Name Date Type 3-1/4 (82.6mm) 3 x 3 Suspended Direct Linear 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring
More informationPlease consult factory for other lumen packages
Project Type Notes 2'x6' ceiling kit shown 4'x4' ceiling kit shown Linear version shown Flush 0.5 StepLens 2 StepLens PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY LENS
More information72-P-SD. MOD 72 Pendant Semi-Direct. Ordering Guide. Key Features 72-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 72 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
More informationRECESSED ASYMMETRIC MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 5" SHOWN WITH LENS OPTION 3 13/32 ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3
More informationEDGE EX3I 3 Suspended Indirect Linear
Project Name Date Type 5-/2 (40mm) EDGE EX3I 3 3-/2 (88.4mm) Key Features 6063-T6 Extruded aluminum housing Highly reflective = white painted reflector Room side maintance for LED system 5-year limited
More informationEDGE EX44 4 x 4 Suspended Direct Linear
Project Name Date Type 4 (101.6mm) EDGE EX44 4 x 4 Suspended Direct Linear 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationNotes: 3 13/32. (5) Please consult factory (6) Available with T8 lamp only
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct Indirect 3 13/32 ORDERING CODE 3 13/32 SHOWN WITH LENS OPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT
More informationNMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent
More informationAvenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
Avenue A FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm
More informationSeem 4. Narrow extruded aluminum 4" linear direct/indirect LED with Pop-lens options.
LED DIRECT/INDIRECT flush lens top & bottom pop-up lens & pop-down lens pop-up lens & flush lens bottom end detail single point corner suspension linear direct only companion wall to ceiling corner companion
More information2LP3GA217R-33FL-UNV-1/2-EBHE-LPT835HL
Recessed Project: Location: Cat.No: LP3 paralouver 2x2 Type: Lamps: Notes: Qty: 2 Lamp, T8, T5, or T5HO 9 or 16 cell The Philips Day-Brite / Philips CFI LP3 paralouver recessed is designed to provide the
More informationEDGE EX3B-WW 3 Suspended Bidirectional Linear Wall Wash
Project Name Date Type 5-3/8 (136.5mm) EDGE EX3B-WW 3 7/16 (11.1m) 3-1/2 (88.9mm) 11/16 (17.5m) Key Features 6063-T5 Extruded aluminum housing Extruded aluminum module with miro reflector for perfect wall
More informationEDGE EX2 2 Direct Suspended Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX2 2 Direct 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring access available
More informationFinelite, Inc Whipple Road Union City, CA / Fax: 510 /
10 Industry Best Year LED Warranty Date Project Type Comments Flush Diffuser Flat Diffuser with Regressed DESCRIPTION High Performance 2" Aperture (HP-2 R) is a patented, linear recessed LED luminaire
More informationCiros P-ID-5200 Pendant-Mounted Indirect/Direct
Type: Project: Ciros P-ID-5200 Pendant-Mounted Indirect/Direct 2 5/8" (67) 2 5/8" (67) Specifications 10 1/2" (267) 10 1/2" (267) U.S. Patent No. D431,086 HOUSING. Two-sided housing, 6063 T6 extruded aluminum.
More informationEX3B. Project Name _ K 4000K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EX3B Project Name Date Type SUSPENDED BIDIRECTIONAL LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationEDGE EX1 1 Suspended Direct Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended Direct Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationPENDANT MOUNT - DIRECT. Project. Type. Notes
Project Type Notes CABLE 4 5 /32 STEM 4 5 /32 PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.3 W/ft 122 lm/w 5 lm/ft 4.3 W/ft 117 lm/w 75 lm/ft 6.8 W/ft 19 lm/w
More informationsolana semi-indirect indirect Low profile pendant with adjustable optics
semi-indirect indirect pendant Low profile pendant with adjustable optics Indirect lighting reduces glare and harsh shadows creating a comfortable environment and improving human performance. Lam Lighting
More information44-P-D. MOD 44 Direct Pendant. Ordering Guide. Key Features 44-P-D. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution D Direct Row length (in feet) Enter in foot increments. Note fixture lengths
More informationPTP Series PTPL-24-DI
DATE NOTES PTP Series PTPL-24-DI LED Luminaire PROJECT TYPE HOUSING: Die-formed, 20-gauge, cold rolled steel housing. Joiner ends are notched for continuous appearance in row-mounted applications. REFLECTOR:
More informationProject. Type. Notes. C custom UNV universal BI bi-level dimming +NL(#) night light circuit (7) O other (6) +GTD(#) generator transfer device (7)
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K 5 1 /2 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.3 W/ft 122 lm/w 5 lm/ft 4.3 W/ft 117 lm/w 75 lm/ft 6.8 W/ft 19 lm/w 1 lm/ft 9.5 W/ft 15
More informationProject. Type. Notes. (3) D dimming (0-10V) 5% standard
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4000K 5 1 /2 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 400 lm/ft 3.3 W/ft 122 lm/w 500 lm/ft 4.3 W/ft 117 lm/w 750 lm/ft 6.8 W/ft 109 lm/w 1000 lm/ft
More informationEDGE EX3 3 Suspended Direct Linear
Project Name Date Type 5-3/8 (36.5mm) EDGE EX3 3 Suspended Direct Linear 3-/2 (88.9mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring access
More informationMHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
More informationModel Size # Lamps Lamp Type Voltage Options RDI-C 2X MV. T5 Lamps 14= F14T5 24 = F24T5HO. T8 Lamps 17 = F17T8
RDI-C 2x2 Series Center Basket Application: This attractive 2 x2 Direct/Indirect Center Basket Troffer Unit combines the energy efficient performances of electronic ballast with soft low-glare contemporary
More informationnar o (năr ō) adj. small or slender in width, especially compared with length <linear fluorescent lamp, golf club, fettuccine, kate moss>
nar o (năr ō) adj. small or slender in width, especially compared with length don t worry, our design skills far exceed our spelling aptitude.
More informationPENDANT MOUNT - DIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K CABLE 2 1 /4 STEM 2 1 /4 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft
More informationEDGE EX4B 4 Suspended Bidirectional Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX4 4 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Room-Side Maintenance
More informationSURFACE MOUNT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K 3 5 /8 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft 1.4 W/ft 96 lm/w
More information15/16" Grid (G) Ceiling. 4 = 4 ft 6 = 6 ft 8 = 8 ft. AC = Cable PD = Pendant G = Grid MG = Mini Grid
DATE NOTES PTP Series PTPL-44-D LED Luminaire PROJECT TYPE HOUSING: Die-formed, 20-gauge, cold rolled steel housing. REFLECTOR: Highly reflective, die-formed steel finished in baked white enamel is standard.
More informationEDGE EX1B 1 Suspended Bidirectional Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended idirectional Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationMHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
More information10 Year LED Warranty
FULLY ILLUMINATED CORNERS AVAILABLE 10 Industry Best Year LED Warranty Date Project Type Comments W x D Flat Endcap Scan QR Code to view video DESCRIPTION The creates a wash of ambient and vertical illumination
More informationMHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
More informationavenue features dimensional data performance Narrow 3" slot T5 fluorescent with opaque satin lens.
features Narrow 3" slot T5 fluorescent with opaque satin lens. Shielding options include corrugated, solid regressed trim, concave louver as well as flush lens. Drywall installation is availale, which
More informationSURFACE - LINEAR - FLUSH
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K SO Spotless Lens Mini Driver ML Mini Driver B Blank SO lens Option only Micro louver Option only NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 2 lm/ft
More informationPENDANT MOUNT. Project. Type. Notes
Project Type Notes CABLE 5 1 /32 STEM 5 1 /32 PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.6 W/ft 18 lm/w 75 lm/ft 7.4 W/ft 11 lm/w 1
More informationEX3. Project Name _ K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EDGE EX3 Project Name Date Type SUSPENDED DIRECT LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationLSLHFL. Litespeed LHF LED Recessed Troffer. Ordering Guide. Key Features LITESPEED. Fixture Type: Project Name: Quick Find litecontrol.
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series LHFL LHF LED Ceiling Type G 15/16 Grid Ceiling NG 9/16 Narrow Face Grid Ceiling SS 9/16 Screw Slot Grid Ceiling DW Drywall
More informationRegressed Optic. Sheetrock. Finelite, Inc Whipple Road Union City, CA (510) Fax: (510)
High Performance Grazer (HP-WG) 10 Industry Best Year LED Warranty Date Project Type Comments 6"W x 6"D Flat (Standard) Endcap DESCRIPTION The High Performance Grazer (HP-WG) is a perimeter luminaire that
More informationRECESSED ASYMMETRIC MOUNT. Project. Type. Notes TECHZONE TM AND LOGIX TM COMPATIBLE
Project Type Notes 5 1/32" PERFORMANCE PER LINEAR FOOT AT 4000K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 750 lm/ft 7.5 W/ft 97 lm/w * Based on a 4 foot luminaire using one driver Please consult factory
More informationBruno BRM4-1 BRM4-2 BRM4-3. parabolic baffle. Each available with optional acrylic opal overlay.
Indirect / Direct T8 SPECIFICATIONS Pendant Mount Modular / 8 X 2 Rectangular CATALOG NUMBER FT Examples: 2 32 SPR 40FT R8 277 GEB0 DCT LP835 F/8 SCEP 3 32 SPR 32FT R8 277 GEB0 SE EL DCT LP835 F/2 AVAILABLE
More informationPRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW
Project Type Notes END VIEW 3 7/16" 87mm 3 15/16" 1mm ORDERING GUIDE CONTROL SENSORS S PRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW AIR Wall S satin lens 3 3 T5 T5 1 1 lamp AP
More informationseem 4 suspended led features dimensional data mounting information performance Narrow extruded aluminum 4 linear direct LED.
suspended led features Narrow extruded aluminum 4 linear direct LED. Individual units and continuous runs in 1 increments. Continuous frosted acrylic lens provides uninterrupted illumination, without pixels
More informationFixture Spec Sheet HFA2 Series 4/15/2011
HIGH BAY FLUORESCENT FOUR LAMP DESCRIPTION Factory Installed Option J HFA2 series high-bay fluorescent fixture is a great energy saving alternative to traditional HID high-bay fixtures. This fixture operates
More information44-P-SD. MOD 44 Pendant Semi-Direct. Ordering Guide. Key Features 44-P-SD. Fixture Type: Project Name: Quick Find litecontrol.com
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 44 MOD Mounting P Pendant Fixture distribution SD Semi-Direct Row length (in feet) Enter in foot increments. Note fixture
More informationSURFACE ASYMMETRIC MOUNT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 400 lm/ft 3.7 W/ft 109 lm/w * Based on a 4 foot luminaire using one driver Please consult factory for
More informationNotes: 4" 102mm. (1) Compatible with Redwood systems
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 4" 102mm ORDERING CODE 3 13/32 87mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 VERSION 3 NOM. LUMENS/FT
More informationSURFACE MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
1.8.263.AXIS PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 3 15/16" 1mm 3 7/16" 87mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 14 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
More informationFINELITE 10 Year LED Warranty
10 Industry Best Year LED Warranty 20I2 Refer to spec page for details High Performance Aperture (HP-4) - Date Project Type Comments Flush Diffuser Flat Diffuser with Regressed DESCRIPTION High Performance
More informationNotes: 2 3/8" 60mm. (1) One lamp with satin lens only (2) Not available for T8 Add 9 per lamp. Specify quantity Requires 120V or 277V
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 2 3/8" 60mm ORDERING CODE 9 3/4 248mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
More informationHighbay Fluorescent - 3 or 4 Lamp Curved Profile Design
- 3 or 4 Lamp Curved Profile Design Description HFB3 series high-bay fluorescent fixture is a great energy saving alternative to traditional HID highbay fixtures. This fixture operates three or four lamps
More informationCatalog No. SHIELDING
I T E C T U R A L A R C H S E N S O R S PROJECT INFORMATION Project Name Catalog No. Type Date FEATURES Crisp shape with clean, elegant lines Direct/Indirect lighting elements Up to 3T8, T5 or T5HO lamps
More informationWALL MOUNT - DIRECT/INDIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K 4 5 /32 5 1 /2 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY UPLIGHT DOWNLIGHT 4 lm/ft 4 lm/ft 6.7 W/ft 124 lm/w 4 lm/ft 5 lm/ft 7.6 W/ft 123 lm/w 4 lm/ft
More informationPENDANT FORMS - DIRECT
Project Type Notes Direct Lens DML Direct Louver lank 1 3 /16 1 3 /16 1 3 /16 A configuration drawing is required Factory is available for assistance See page 2 for example of how to specify 2 Mini Driver
More informationFINA F48 48 Direct and Uplight Architectural Round
Project Name Date Type 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with
More information2 Photocell option available in endcap, tenon or corner assembly. 81.8% Efficiency. Nominal Row Length R4 R8 R12. X FT Must be in 4 increments
SPECIFICATIONS Construction Die-formed, pre-painted steel housing. Extruded aluminum fillers. Die-cast aluminum end caps. Highly specular aluminum end plates. Shielding GrateOptic curved, crenulated diffuser
More informationBruno. dimensions / lamping. specifications. Die-formed cold-rolled steel housing. Die-cast aluminum flat or sculptured end cap.
Bruno Responding to a present-day penchant for classic rectilinear forms, Peerless Bruno moves front and center with its pure, low-profile shape and superlative indirect optics. Unique downlight design
More informationNotes: 2 13/16" 71mm. +GTD(#) generator transfer device (3)
1.8.263.AXIS PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW Round Wedge 3" 76mm 2 13/16" 71mm 3 7/8" 98mm 3 11/16" 94mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 PRODUCT SPECIFICATIONS
More informationPENDANT ASYMMETRIC MOUNT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY Direct/Indirect Direct Indirect UP DOWN 65 lm/ft 4 lm/ft 8.7 w/ft 119 lm/w * Based on a 4 foot luminaire
More informationProject: Type: Qty: Height Lamping Finish Voltage Options. Series MTRQ /8" (1252mm) /16" (551mm) Options
Project: Type: Qty: _ Series Height Lamping Finish Voltage Options Series Height Lamping Finish Voltage Options MTR Square Column 2 2 ft. 4 4 ft. 6 6 ft. Metal Halide 2H050 (2x)50w 2H070 (2x)70w T8 2T8
More informationFULL BLEED APPLICATION SHOT RENDERING
KM FULL BLEED APPLICATION SHOT RENDERING K1 M1 KM ANATOMY POWERFUL PERFORMANCE K1 1.50 High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design. 0.75 optional aperture 7.00
More informationFINA F48B 48 Direct and Uplight Architectural Round
Project Name Date Type FINA F48B 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish
More informationFINA F36B 36 Bidirectional Architectural Round
Project Name Date Type FINA F36B 36 Bidirectional 4-1/2 4-7/8 (114.3mm) (123.8mm) 33-15/16 (862mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with 1/4 trim Aluminum
More informationAvenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm 4.3" 109.22mm
More informationPENDANT ASYMMETRIC MOUNT - DIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K 3 3 /8 3 3 /8 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 5 lm/ft 4.5 W/ft 11 lm/w 6 lm/ft 5.5 W/ft 19 lm/w 75 lm/ft 6.9 W/ft 16 lm/w 1 lm/ft 9.4 W/ft
More informationRPX. Specular louver Semispecular RSX. louver. FUS GLR fuse for each ballast IDS
Photometric Drawing for (1) 28W T5 Lamp CATALOG NUMBER FIXTURE OVERALL ROW LENGTH MAX SECTION LENGTH SHIELDING LAMPING (SEE CROSS SECTION) VOLTAGE OPTIONS* EF1P Enform 1 Pendant # # must be specified in
More informationPENDANT ASYMMETRIC MOUNT - DIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K 3 3 /8 3 3 /8 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 5 lm/ft 4.5 W/ft 11 lm/w 6 lm/ft 5.5 W/ft 19 lm/w 75 lm/ft 6.9 W/ft 16 lm/w 1 lm/ft 9.4 W/ft
More informationapollo 8 patient bed light with LED options features dimensional data performance
patient bed light with LED options features 8" wide recessed patient bed light with LED options available in 4' & 5' lengths. T5 or T8 lamps provide reading and ambient illumination, additional T5HO lamps
More informationScan QR Code to view video
10 Industry Best Year LED Warranty Date Project FULLY ILLUMINATED CORNERS AVAILABLE Type Comments W x D Flat Endcap Scan QR Code to view video DESCRIPTION The High Performance is a luminaire that creates
More informationAvenue B. Grid Mount (Regress Trim Shown) Flush Lens. Drywall Flange (Regress Trim Shown) Narrow 3" slot LED with frosted satin lens.
LED corrugated regress trim solid regress trim flush lens DIMENSIONAL DATA Grid Mount (Regress Trim Shown) FEATURES Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid
More informationFixture Spec Sheet HFB3 Series 4/15/2011
HIGH BAY FLUORESCENT FOUR LAMP DESCRIPTION HFB3 series high-bay fluorescent fixture is a great energy saving alternative to traditional HID high-bay fixtures. This fixture operates four lamps and as a
More informationRECESSED WALL WASH MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 13/32 4 3/8" 4" IC culus Listed Type I.C. SHOWN WITH LENS OPTION ORDERING CODE 2 15/16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PRODUCT SPECIFICATIONS
More informationNotes: Please specify
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS NARROW 2 1/8" 54mm 6 152mm WIDE 2 1/8" 54mm ORDERING CODE 8 3/4 222mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS (1)
More informationBSS610 GENERAL INFORMATION - FIXTURE HOUSING
BSS610 GENERAL INFORMATION - FIXTURE HOUSING 2 wide multi-axis direct LED luminaire system Project: Type: FEATURES Create an endless variety of multi-directional fixture runs and geometric shapes with
More informationLED Flat Panel Luminaires
LED Flat Panel Luminaires Great Features/Benefits TCP s LED Flat Panel Luminaires feature a slim, low-profile design with full panel diffusion and superior uniformity. These DLC Premium listed flat panels
More informationNotes: 4 3/4" 121mm. (1) Compatible with Redwood systems
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 4 3/4" 121mm 5 1/32 128mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 VERSION 3 NOM.
More informationWALL MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS END VIEW 9" 229mm 3 3/4" 95mm 4 3/4 121mm 7 1/8 181mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 CENTER OPTICS
More information