2 Photocell option available in endcap, tenon or corner assembly. 81.8% Efficiency. Nominal Row Length R4 R8 R12. X FT Must be in 4 increments

Transcription

1

2

3

4

5 SPECIFICATIONS Construction Die-formed, pre-painted steel housing. Extruded aluminum fillers. Die-cast aluminum end caps. Highly specular aluminum end plates. Shielding GrateOptic curved, crenulated diffuser is extruded opal acrylic. dimensions / lamping 6 3 CLM9 (2) T5, T5HO Reflectors Die-formed, highly specular aluminum reflector with a minimum of 98% reflectance Finish Low gloss, white paint standard on fillers and end caps Fixture Length 4, 8, and 12 individual fixture sections for nominal suspension spacing of 4, 8 and 12. Add for each end cap to determine total fixture length. Using internal joiners, 4, 8 and 12 sections can be joined to form longer length fixtures. CONFIGURATIONS performance Corner Assembly (Catalog No. CLM9 CNR) Notes: 1 X (Catalog No. CLM9 CNRX) and T (Catalog No. CLM9 CNRT) configurations are also available as standard options. Consult factory for special configurations. CLM9 (2) T5HO 90.1% Indirect 9.9% Direct Tenon Assembly (Catalog No. CLM9 TNN) 2 Photocell option available in endcap, tenon or corner assembly. 81.8% Efficiency For complete photometric data visit Fixture # of Lamps in Cross Section Lamp Type Shielding CLM9 2 28T5 54T5HO COA Crenulated Opal Acrylic Nominal Row Length X FT Must be in 4 increments Maximum Section Length Voltage Ballast Type R4 R8 R GEB10 <10% THD Electronic S5 SIMPLY5 ADEZ 1,2 Advance Mark 10 dimming ECO10 1 Lutron ECO-10 dimming OSDIM 1,2 Osram 0-10v dimming Reference Ballast Chart on website or consult factory for other options. # of Emergency Modules Blank No No Emergency 1SE 1 1 Section 2SE 2 2 Sections XSE X X Sections Emergency Type Switching Lamp Color Mounting Type Overall Suspension Options Blank No Emergency SCT Single Circuit L/LP No Lamp F1 T-Bar Ceiling (Universal ACG Adjustable Cable or Night Light DCT 4,5 Dual Circuit LP K 80+ CRI Mounting Bracket) Grippers EL 3 Emergency Battery Pack ALC 4,5 Alternate Lamping LP835 LP K 80+ CRI 4100K 80+ CRI F1A T-Bar Ceiling (UMB with Integrated J-Box) APF Alternate Power Feed (F4 mounting only) EC Emergency / Module F2 Hard Ceiling (Horizontal DL Damp Location Label Available with T5: Night Light Circuit J-Box) LP830P K 80+ CRI Circuit EN 3 Emergency Battery Pack with Night Light Circuit LP835P 6 LP841P 6 Notes: 1 Not available in 347 volt. 2 Not available with 28T5. 3 Option EL or EN (Battery Pack): a. is not permitted with dimming in the same row b. must be in the same section as the lamp being operated Premier 3500K 80+ CRI Premier 4100K 80+ CRI Premier Reference Lamp Chart on website or consult factory for other options. F4A Grid Ceiling IDS F4B Grid Ceiling IDS 9 16 F4C Grid Ceiling IDS Clip Screw Slot c. is not permitted in a 4 section d. is limited to one battery pack per section 4 For energy savings, in order to maintain the uniform, luminous aesthetic of the lens, SCT (Single Circuit) paired with dimming, Simply5 or ALC (Alternate Lamping overall suspension overall suspension overall suspension overall suspension overall suspension XX XX overall suspension DPC Daylight Photocell (consult factory) ELH EM through wire with separate feed ELS EM through wire with single feed GLR Fusing (fast blow) GMF Fusing (slow blow) Module Circuit) is recommended over DCT (Dual Circuit). 5 DCT (Dual Circuit) and ALC (Alternate Lamping Module Circuit) are not available with dimming.

6

7 specifications dimensions / lamping Construction Die-formed, pre-painted steel recessed housing. Extruded aluminum surface mounted housing. Extruded aluminum fixedlength suspension yokes. 3 PLM9 (2) T5, T5HO (1) Lamp per diffuser Shielding GrateOptic curved, crenulated diffuser is extruded opal acrylic with opaque painted ends. Reflectors Die-formed, specular aluminum reflectors PLM9 G G Lay-in grid mount Finish Satin anodized finish on suspension yokes. Low gloss, white paint standard on surface mounted housing Fixture Length 4 and 5 individual fixture sections available. Overall fixture lengths are 4 9 and 5 9 respectively. Fixtures mount to 4 grid or specify surface-mounted option PLM9 S S Surface mount performance PLM9 (2) T5HO (1) Lamp (half of fixture shown) 89.1% Indirect 10.9% Direct 88.7% Efficiency For complete photometric data visit Fixture Ceiling Type PLM9 G Lay in grid S Surface mount # of Lamps in Cross Section Lamp Type 2 28T5 54T5HO Available for 5 FT: 80T5HO Nominal Row Length Voltage Ballast Type U4 4 U GEB10 < 10% THD Electronic GEB95 1,3 < 10% THD,.95 BF GEB115 1,3 < 10% THD, 1.15 BF GEB80 2,3 < 10% THD,.80 BF GEB95S 1,3 < 10% THD,.95 BF step dimming GEB80S 2,3 < 10% THD,.80 BF step dimming GEB115S 1,3 < 10% THD, 1.15 BF step dimming ECO10 3 Lutron ECO-10 dimming DMHL 2,3 Lutron Hi Lume dimming OSDIM 2,3 Osram 0-10V dimming Reference Ballast Chart on website or consult factory for other options. Switching Lamp Color General Options Mounting Options SCT L/LP No Lamp DL Damp Location Label CP Chicago Plenum LP K 80+ CRI LP K 80+ CRI LP K 80+ CRI Available with T5: LP830P 3000K 80+ CRI Premier LP835P 3500K 80+ CRI Premier LP841P 4100K 80+ CRI Premier Reference Lamp Chart on website or consult factory for other options. GLR Fusing (Fast Blow) GMF Fusing (Slow Blow) NYC New York City Code Notes: 1 28T5 only. 2 54T5HO only. 3 Not available in 347 volt. 4 54T5HO only. GEB10 ballast only.

8

9 specifications Construction Housing cover is manufactured from cold rolled steel. End caps are die-cast aluminum. dimensions / lamping 3 CLW9 (1) T5, T5HO Shielding GrateOptic curved, crenulated diffuser is extruded opal acrylic. Shielding can be rotated to one of two positions, wall-facing or ceiling-facing Reflectors Die-formed, white, high reflectance aluminum reflector Finish Housing cover is painted white. Select white or painted aluminum finish for the joiner and end caps. Fixture Length Individual fixture lengths in a single section are 2, 3, 4 and 8. For total fixture length, add 1 4 for each end cap. Using internal joiners, 2, 3, 4 and 8 sections can be joined to form longer length fixtures. Lenses are not continuous in a run or 8 unit. The maximum lens length is (for a 4 unit). Lenses are separated by a gap between lamp modules. performance CLW9 (1) T5HO Wall-facing 53.6% Indirect 46.4% Direct 79.3% Efficiency Polycarbonate dust cover fits securely in either position. CLW9 (1) T5HO Ceiling-facing 88.8% Indirect 11.2% Direct 83.3% Efficiency For complete photometric data visit Lens is field-adjustable. Fixture # of Lamps in Cross Section Lamp Type CLW9 1 28T5 54T5HO Available for 3 FT: 21T5 39T5HO Available for 2 FT: 14T5 24T5HO Nominal Row Length 2 FT 3 FT 4 FT 8 FT X FT Maximum Section Length Voltage Ballast Type R2 R3 R4 R GEB10 <10% THD Electronic S5 1 SIMPLY5 ADEZ 1,2 Advance Mark 10 dimming ECO10 1 Lutron ECO-10 dimming OSDIM 1,2 Osram 0-10v dimming Reference Ballast Chart on website or consult factory for other options. # of Emergency Modules Emergency Type Switching Lamp Color End Finish Options Blank No Emergency Blank No Emergency or 1SE 1 Section Night Light 2SE 2 Sections EL 1,3 Emergency Battery XSE X Sections Pack EC Emergency / Night Light Circuit EN 1,3 Emergency Battery Pack with Night Light Circuit SCT Single Circuit ALC 4 Alternate Lamping Module Circuit L/LP LP830 LP835 LP841 No Lamp 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI Available with T5: LP830P 3000K 80+ CRI Premier LP835P 3500K 80+ CRI Premier LP841P 4100K 80+ CRI Premier Reference Lamp Chart on website or consult factory for other options. C110 Painted Aluminum Finish C041 White (Low Gloss) DL Damp Location Label DU Dust Cover ELH EM through wire with separate feed ELS EM through wire with single feed ELS2 Normal feed w/ EM Separate Neutral GLR Fusing (fast blow) GMF Fusing (slow blow) Notes: 1 Not available in 347 volt. 2 Not available with 28T5. 3 Option EL or EN (Battery Pack) is not permitted in 2, 3, 4 section. 4 ALC (Alternate Lamping Module Circuit) is not available with dimming.

10

11

12 Cert no. SCS-COC %