Lift & Flap Systems Standard / SERVO-DRIVE Ideal for wall cabinets with divided fronts abinet height 480 up to 040 mm abinet width up to 800 mm Silent and effortless closing, thanks to BLUMOTION Light operating forces Variable stop Tool-free assembly -dimensional front adjustment of both fronts Simple, infinitely variable lift mechanism entre hinge with finger safety feature Power factor LF = abinet height KH (mm) x combined weight of both fronts and handle (kg) Suits Standard Suits SERVO-DRIVE Suits Standard / SERVO-DRIVE Order Information Lift mechanism set Power factor LF 600-5500 0F00.05 550-050 0F500.05 9000-750 0F800.05 omposed of: Lift mechanism set (symmetrical) chipboard screws 4 x 5mm ode --0 --50 --80 Telescopic arm set abinet height KH** 480-570mm 560-70mm 700-900mm 760-040mm 0F00.0 0F500.0 0F800.0 0F900.0 ode -0-0 -0-50 -0-80 -0-90 over cap set Material olour Light Grey White 0F8000 0F8000-W ode -0-005 -0-007 over cap set for SERVO-DRIVE Material olour Light Grey F8000 White F8000-W a, x SERVO-DRIVE cover plate left b, x over cap large right c, x over cap round d, x SERVO-DRIVE switch e, 6 x Blum distance bumper, 5mm 4 5 Hinge Set - INSERTA / EXPANDO / Knock In Description ode INSERTA / EXPANDO / 78Z550T0-08-78Z55 Knock In 0, x LIP top 0 unsprung hinges INSERTA, x LIP top centre hinges Knock In 4,5,, 6 x Horizontal cam mounting plate Knock In, x ruciform mounting plates EXPANDO 0 4 5 0 6 Hinge Set - Description 78Z5500T0 0, x LIP top 0 unsprung hinges, x LIP top centre hinges 4,5,, 6 x Horizontal cam mounting plate, x ruciform mounting plates ode -08-78Z550 SERVO-DRIVE set Material olour ode Light Grey FA000 --000 RAL 707 6a, x Drive unit 6b, x 500mm Distribution cable 6c, x onnection node 6d, x able end connector Blum recommend two syncronised drive units for a power factor over 750 ode --00 --0 Page Instructions Overview - Devices Planning - symmetrical/asymetrical Accessories. DRAWERS, HINGES & ASSEMBLY DEVIES D Planning - SERVO-DRIVE switch and bumper.6, Removal& Adjustment - SERVO-DRIVE.4/.5,Removal, Adjustment & SafetyWarning.6 Blum Warranty. Dimension data and specifications may change without notification..40 A.0
Standard / SERVO-DRIVE Order Information 7 8 9 SERVO-DRIVE Transformer Description ode 7W/40V Z0NE050.0-44-050 Transformer unit housing Description ode Panel fixing Z0NG00-44-055 able & Plug Description ode Australian Plug Z0M00K -44-05 Accessories Optional items Opening angle stop Description ode Maximum of 04 opening angle 0F705-0-04 Maximum of 8 opening angle 0F70-0-08 able Holder Material ode Z0K0009-44-007 For securing the distribution cable Alternative to transformer housing 8 Transformer Base Housing Material ode Z0NG000-44-05 May be required depending upon access to power source Distribution able & able End Protector Length ode 8m Z0K800AE -44-080 For cutting to length an be used as a distribution, bracket profile and communications cable x Distribution cable x able end protectors May be required to connect to main distribution cable onnecting Node & able End Protector Material olour ode Black/ Orange Z0V00E.0-44-079 LINOLN SENTRY DRAWERS, HINGES & ASSEMBLY DEVIES. A.
Standard / SERVO-DRIVE Planning - Symmetrical (equal) Drilling position * Drilling depth 5 mm ** Alternative drilling Space requirement 4 x chipboard screws Ø 4 x 5 mm Drilling for SERVO-DRIVE distribution cable, left only abinet height KH H 480-549 mm KH x 0. - 8 mm 550-040 mm KH x 0. - 57 mm Front assembly KH = abinet height LIP top 0 hinge KH = abinet height Opening Angle Stop Y Without FHo x 0.44 + 8 mm 04 FHo x 0.4 + 4 mm 8 0 mm LIP top centre hinge F Gap () LIP top 0 special hinge SFA Front overlay of the side panel Drilling Distance TB Drilling Distance TB X abinet height KH -7-5H00V, -7-7H00, -7-7H00E 480-549 mm 70 mm 550-040 mm 47 mm Front Overlay FA 5 6 7 8 9 0 4 5 6 7 0 4 5 6 4 5 6 6 4 5 6 9 4 5 6 Mounting Plate entre Gap F 4 5 6 0 6 5 4 6 9 Mounting Plate Front assembly INSERTA/EXPANDO.4 DRAWERS, HINGES & ASSEMBLY DEVIES Dimension data and specifications may change without notification.
Standard / SERVO-DRIVE Planning - Asymmetrical (unequal) Drilling position * Drilling depth 5 mm ** Alternative drilling Space requirement 4 x chipboard screws Ø 4 x 5 mm Drilling for SERVO-DRIVE distribution cable, left only Theoret. cabinet height TKH H 480-549 mm KH x 0. - 8 mm 550-040 mm KH x 0. - 57 mm Front assembly TKH = FHo (mm) x (incl. gaps) TKH Theoretical cabinet height KH abinet height FHo Upper front height FHu Lower front height LIP top 0 hinge KH = abinet height Opening Angle Stop Y Without FHo x 0.44 + 8 mm 04 FHo x 0.4 + 4 mm 8 0 mm LIP top centre hinge F Gap () LIP top 0 special hinge SFA Front overlay of the side panel Drilling Distance TB Drilling Distance TB Theoret. cabinet height TKH X -7-5H00V, -7-7H00, -7-7H00E 480-549 mm FHo / + 70 mm 550-040 mm FHo / + 47 mm Front Overlay FA 5 6 7 8 9 0 4 5 6 7 0 4 5 6 4 5 6 6 4 5 6 9 4 5 6 Mounting Plate entre Gap F 4 5 6 0 6 5 4 6 9 Mounting Plate Front assembly INSERTA/EXPANDO Theoret. cabinet height TKH = Front height top FHo (mm) x (incl. gaps) Blum recommends the more powerful lift mechanism for overlapping areas. LINOLN SENTRY DRAWERS, HINGES & ASSEMBLY DEVIES.5 A.
Planning /, removal and adjustment Planning Blum distance bumper (SERVO-DRIVE application only) * From cabinet front edge for fronts that protrude below SERVO-DRIVE switch Insert Blum distance bumper (do not glue) Lift mechanism Recommendation for aluminium frames: onsider drilling for the Blum distance bumper in the cabinet side. A trial application must be carried out when fixing to the front Lift mechanism WARNING Telescopic arm could spring up and cause injury. Telescopic arm could spring up and cause injury Remove the telescopic arm rather than pushing it down Top front Bottom front.6 DRAWERS, HINGES & ASSEMBLY DEVIES Dimension data and specifications may change without notification.
, removal and adjustment Bottom front Lift mechanism Setting Lift mechanism Note: Perform the reference run for SERVO-DRIVE after setting the lift mechanism! Setting Front Top hinge LINOLN SENTRY DRAWERS, HINGES & ASSEMBLY DEVIES A..7
, removal and adjustment Front entre hinge Front Shorten the telescopic arm Telescopic arm Lengthen the telescopic arm Removal.8 DRAWERS, HINGES & ASSEMBLY DEVIES Dimension data and specifications may change without notification.
, removal and adjustment Front Removal WARNING Telescopic arm could spring up and cause injury. Opening angle stop -0-04 or -0-08 Telescopic arm could spring up and cause injury Remove the telescopic arm rather than pushing it down Additional 5th chipboard screw Ø 4 x 5 mm LINOLN SENTRY DRAWERS, HINGES & ASSEMBLY DEVIES.9 A.