Sliding Door Fittings, Roller Shutters Folding Sliding Door Fittings
|
|
- Winifred Cain
- 5 years ago
- Views:
Transcription
1 Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking Folding door stop: With concealed hinges and opening angles of or 165 Door width: Max. 300 mm, perform stop test with wider doors Installation: For screwing into 32 mm series drilled holes, control arm can be mounted on the left or right Application Installation Both doors must have the same width 1 Door 2 Doors Stop with concealed hinges and opening angles of or 165 Corner cabinet with 2 doors, stop with concealed hinges with opening angle of 165 Corner mounting: The butting edges of the doors are mitred at 45. The doors can be opened independently, if desired. Mount control arm to door Mark a using the control arm with the door closed Mark b using the control arm with the door fully open Fit mounting plate so that the control arm pivot point is at intersection c With control arm : Attach control arm to mounting plate and secure with cap nut With control arm 165 : Screw on control arm with mounting plate FF.4
2 Control arm , lateral mounting with concealed hinges and opening angles of Cap nut Bearing Folding door stop: Concealed hinges with opening angles of Installation depth: Min. 320 mm Control arm Supplied with 1 Control arm with door bearing made of nickel plated steel Mounting plate 1 Plastic mounting plate Door bearing 1 Plastic bearing 1 Plastic cap nut Length mm Cat. No Packing: 1 or 50 pcs. Fitting to door x = Door overlay Control arm 170, lateral mounting with concealed hinges and opening angle of 170 Mounting plate Folding door stop: Concealed hinges with opening angle of 170 Installation depth: Min. 330 mm Press-in Sleeve Door bearing Control arm Supplied with 1 Nickel plated steel control arm 1 Nickel plated steel mounting plate 1 Screw for mounting plate 1 Nickel plated door bearing 1 Plastic press fit dowel Ø10 x 13 mm Fitting to door Screw Please order separately: Concealed hinges, rolled hinges, folding door handle and adapter for fitting handles to folding doors. Length mm Cat. No Packing: 1 or 50 pcs. FF.5
3 Fold 20 VF 4T, door weight up to 10 kg Door height: Max. 1,000 mm Door width: Max. 500 mm Door thicknesses: Max. 20 mm Running gear: Top running, 2 rollers Version: Attached at the side Fitted door leaves can be combined to door leaf pairs using detachable panel to panel hinges with removable pin One-man installation possible even with large door leaves For door heights up tp 1,000 mm Installation Running track dimension Door offset FF.6
4 Set Cat.No. Complete fitting set for 2 pairs of doors without running track Packing: 1 set Set consisting of: Material Finish For 1 pair of doors Cat. No. Running gear, left, top running, 2 rollers, Steel Burnished 1 pc friction bearing mounted, incl. screws Running gear, right, top running, 2 rollers, friction bearing mounted, incl. screws Steel Burnished 1 pc Concealed hinge, with 1 screw hole, for Ø35 mm cup drilling Zinc alloy Nickel plated 2 pcs Panel to panel hinge, can be detached, with removable steel pin Zinc alloy Nickel plated 4 pcs Packing: 20 pcs. Please order running track and additional components separately. Running track Material Finish Length mm Cat. No. Running track, not drilled Aluminium Bright 5, Packing: 20 pcs. Additional components Material Finish Cat. No. Panel to panel hinge, cranked, Steel Galvanized with fixed steel pin Packing: 20 pcs. FF.7
5 Fold 40 MF/VF flex, door weight up to 40 kg Area of application: For folding sliding doors that are free sliding or mounted to the cabinet on one side with concealed hinges Door height: Max. 2,500 mm Door width: Max. 500 mm Door thickness: mm Vertical door gap width: 1 4 mm Height adjustment: ±2 mm at running gear using screw Running gear: 3 rollers, with plastic coated ball bearing mounted rollers Easy height adjustment using adjusting screw Installation option 1: Mounted to one side of cabinet Installation option 2: Free sliding Installation option 3: Several pairs of doors connected, free sliding or mounted to one side of cabinet When mounting doors dimensions specified observed accordingly.! Outer runner " Centre runner Illustration shows installed free sliding doors Illustration shows mounted to one side of cabinet Dimensions for centre runner " FF.
6 Set consisting of: Material Finish Cat. No. Top running gear, end door Steel Nickel plated Top running gear, centredoor Steel Nickel plated Bottom guide, end door Steel Nickel plated Bottom guide, centre door Steel Nickel plated Panel to panel hinge Zinc alloy Nickel plated Hinge connection, centre Steel Nickel plated Packing: 1 pc. Mounted to 1 side of cabinet Free sliding 2-leaf 3-leaf 4-leaf 5-leaf 6-leaf 1 pair of doors 2 pairs of doors 3 pairs of doors Top running gear, end door 1 pc. 1 pc. 1 pc. 2 pcs. 2 pcs. 2 pcs. Top running gear, centredoor 1 pc. 1 pc. 2 pcs. 2 pcs. 1 pc. 2 pcs. Bottom guide, end door 1 pc. 1 pc. 1 pc. 2 pcs. 2 pcs. 2 pcs. Bottom guide, centre door 1 pc. 1 pc. 2 pcs. 2 pcs. 1 pc. 2 pcs. Panel to panel hinge 3 pcs. 3 pcs. 6 pcs. 6 pcs. 9 pcs. 3 pcs. 6 pcs. 9 pcs. Hinge connection, centre 1 pc. 1 pc. 2 pcs. 2 pcs. 1 pc. 2 pcs. Order required door configuration individually according to "Supplied with" table. Please order running and guide tracks separately. Tracks Material Finish Length mm Cat. No. Single top running track, for screw fixing Aluminium Bright 2, , Bottom guide track, for screw fixing Aluminium Bright 2, , FF.9
7 Fold 40 MF/VF 1T, door weight up to 40 kg Area of application: Folding sliding doors mounted to cabinet on one side with concealed hinges Door height: Max. 2,500 mm Door width: Max. 500 mm Glass thickness: 4 mm Vertical door gap width: 2 mm Height adjustment: ±2 mm on running gear using screw Running gear: 3 rollers, with plastic coated, ball bearing mounted rollers Easy height adjustment using adjusting screw Installation dimension Installation Required number of concealed hinges GH (glass height) = frame height mm FF.90
8 For 1 pair of doors Material Finish Packing Cat. No. A Top running gear, 1 pc. Steel Nickel plated 1 pc B Bottom guide 1 pc. Steel Nickel plated 1 pc C Panel to panel hinge Depending on door height Steel Nickel plated 1 pc D Frame mounting angle, small pcs. Steel Galvanized pcs E Frame mounting angle, large pcs. Steel Galvanized pcs F Buffer 4 pcs. Plastic Black 4 pcs Please order hinge, mounting plate and securing bracket to prevent cabinet from tipping separately. FF.91
9 G 1st top and bottom insert for door overlay 25 mm G 2nd top and bottom insert for door overlay 20 mm G 3rd top and bottom insert for door overlay 15 mm I 1st insert for bottom only, for door overlay 25 mm I 2nd insert for bottom only, for door overlay 25 mm I 3rd insert for bottom only, for door overlay 25 mm For 1 pair of doors Material Finish Packing Cat. No. 3 pcs. Plastic Grey 3 pcs pcs. Plastic Grey 3 pcs pcs. Plastic Grey 3 pcs pc. Plastic Grey 1 pc pc. Plastic Grey 1 pc pc. Plastic Grey 1 pc H Insert, centre Depending on door height Plastic Grey 2 pcs J Set of fixing screws for attaching fittings to aluminium frame 1 set 1 set Please select parts number G and I that complies your requeirements. FF.92
10 Material Finish Packing Cat. No. Top running track, for screw fixing Aluminium Bright 2,000 mm ,000 mm Bottom guide track, for screw fixing Aluminium 2,000 mm Aluminium frame profile, for screw fixing with frame mounting angle 3,000 mm Aluminium Silver coloured anodized 2,500 mm ,500 mm Bar profile, for subdividing doors Aluminium Silver coloured anodized 2,500 mm ,500 mm Traverse profile, for fixing the bar profile Aluminium Silver coloured anodized 2,500 mm Traverse profile, for fixing the bar profile Steel Galvanized 2 pcs. 3,500 mm Glass retaining profile for stabilisation and as clatter prevention for the inserted panel of glass Plastic Transparent 3,000 mm Please order securing bracket to prevent cabinet from tipping FF.93
Hinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationSliding Door Fittings, Roller Shutters Vertical Sliding Door Fittings
Vertico 16 VF, door weight up to 15 kg, for 2 bi-parting doors Door height: 300 600 mm Door thickness: Min. 16 mm Side panel thickness: Min. 1 mm Running gear: Top and bottom running, 4 rollers, with ball
More informationSliding Door Fittings, Roller Shutters
Sliding Door Fittings, Roller Shutters Contents Sliding Timber Door Fittings Finetta Flatfront Foldfront Mobilus Classic Sliding door system Automatic sliding door system Planomix Planofit Straightening
More informationSliding Door Fittings Contents
Contents Furniture Solutions Information Timber Door Fittings Glass Door Fittings Frame Door Fittings Accessories Folding Sliding Door Fittings Vertical Sliding Door Fittings Architectural Solutions Information
More informationSliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings
Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used
More informationFolding and sliding door systems
Folding and sliding door systems Folding door systems Information Folding doors combining the advantages of classical revolving doors with the practical functioning and elegance of sliding doors. They
More informationHinges and Flap Fittings
Hinges and Flap Fittings Contents Concealed Hinges Duomatic Premium Concealed hinge Duomatic Concealed hinge Metallamat Concealed hinge Metalla Concealed hinge Push Latch for push to open hinge Metalla
More informationHinges and Flap Fittings
Hinges and Flap Fittings We offers a wide range of options the term is functionality and quality. Contents Concealed Hinges DUOMATIC Concealed hinge DUOMATIC PUSH Concealed hinge PUSH Door opening system
More informationHinges and Flap Fittings Application Matrix
Application Matrix Model Opening angle Application Page Soft close Opening Integrated Optional With handle Without handle Screws Without tools Duomatic Concealed hinges Premium 110 Standard.11 / / / /
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationDoor Hinges Concealed Hinges
Concealed mortise hinge For installation in wall recesses For flush wooden or metal doors Suitable for DIN left hand and DIN right hand Certified for fire resistant and smoke control doors in compliance
More informationHanging Cabinets & Accessories
.0 Hanging Cabinets & Accessories.1 Blum AVENTOS HK-Stay lift for wooden fronts or wide alu frames Material: Steel mechanism, plastic cover caps Finish: Mechanism galvanized, cover cap grey Adjustment:
More informationWindow Fittings Sliding/Folding Fittings
Folding window fitting Fold 35 Features For timber door frames For 2- to 6-leaf folding doors Floating suites possible Full corrosion resistant construction, ideal for coastal applications Concealed channel
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationStorage Fittings 1 º q µ ³ ³ Â É 1.1
1.0 Storage Fittings 1 1.1 1 ARENA Plus anti-slip finish welcome to the quiet kitchen Kesseböhmer developed the special ARENA Plus coating which prevents pots and pans, crockery and groceries slipping
More informationSliding Door Fittings For wooden doors
Sliding Door Fittings For wooden doors Infront EKU clipo 10 S-IF For door weight up to 10 kg The single top running track can be installed by Screw fixing into groove or Clamping into groove with swivel
More informationCONTENTS. Sliding Door Fittings Information. Sliding door fittings from Häfele. Sliding door application for Classic 40-J/80-J/120-J
Information CONTENTS Sliding door fittings from Häfele...3 Soft and self closing systems from Häfele...4 Sliding door fitting Classic 40-P/80-P/120-P SLIDO... Sliding door fitting Classic 40-P/80-P/120-P
More informationFrontal Covers 9 º qâ Ê ³ n 9.1
.0 Frontal Covers.1 Furniture handles and knobs Furniture handles combine functionality and design and give a individual and personal touch to each piece of furniture. Häfele provides a huge range of furniture
More informationVersion C > (recommended max. width) Version D > (recommended max. width) Version E
Classic 40-L to 120-L Sliding door fitting from Area of application: For 1-leaf and 2-leaf sliding doors : Tempered safety glass For glass thickness: Tempered safety glass: 8 and 10 Adjustment facility:
More informationHinges. Various hinges. Stainless steel hinge with removable pin. Removable pin hinges with nylon washers. Removable pin.
Stainless steel hinge with removable pin Removable pin. Part number Material Finish Weight (g) 52-1-3877 304 stainless steel gloss 60 94.5 1.5 4 50 ø 6 ø 5 20 42 10 45 () 74.5 5.5 Removable pin hinges
More informationLocks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
More informationSliding and Folding Door Fittings Louvre Door Fittings
Sliding louvre door fitting Frontslide 60/A Ceiling and top wall mounting Basic option Option 1 For sliding louvre doors made of wood, metal or aluminium Guide with zero clearance Space saving Sliding
More informationLocking and Security Information
Information Profile cylinder Locking cylinders are catergorized according to a) Front view b) Side view Profile cylinder Double cylinder Single cylinder Thumbturn cylinder The definition of important components
More informationSolu. Stainless steel legs. Product Catalogue HARDWARE. Combining Design And Engineering Excellence. Furniture Hardware
HARDWARE Combining Design And Engineering Excellence Stainless steel legs Product Catalogue Solu 2013.10 Updated Aluminium Frame Door And Edge Profiles Handle Free Solutions Solu offer a range of metal
More informationFolding door systems: WingLine L
s: WingLine L All the benefits at a glance Experiencing folding doors in a new way. WingLine L lets you produce folding sliding doors in a completely new dimension of convenience. The revolutionary Push
More informationSteel drawer system with wide appeal: MultiTech
Steel drawer system with wide appeal: MultiTech Suary Range suary 4-5 Assembly aids 23-25 Technical information Planning dimensions 26-30 / 36-39 Assembly / adjustment / removal 31-35 Quality criteria
More informationEA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60
EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationHAWA CONCEPTA & FOLDING CONCEPTA
2018 www.hafele.com.au HAWA CONCEPTA & FOLDING CONCEPTA NEW GENERATION III New thinking for new rooms Hawa and EKU have become Hawa Sliding Solutions. As a global technology and market leader, we discover
More informationCabinet interiors Summary of ranges
Cabinet interiors Summary of ranges Fitting systems for kitchens Summary 888-889 Fitting systems for bathrooms Summary 1052-1053 Fitting systems for wardrobe interiors Range summary 1068-1069 Fitting systems
More informationKitchen and Bath Organization
Ironing Boards...873 874 Pull-Out Table Systems...875 876 Foldaway Systems...877 878 Corner Systems...879 896 Base Cabinet Pull-Out Systems...897 905 Basket Storage Systems...906 910 Pantry Pull-Out Systems...911
More informationConspicuously inconspicuous: Sensys in obsidian black
Conspicuously inconspicuous: Sensys in obsidian black Perfect camouflage on exclusive materials and dark surfaces As intelligent as nature Good camouflage is worth a lot. Numerous creatures mimic their
More informationHettich lager sortiment
Hettich lager sortiment Finest quality workmanship Our promise to you, our customers, is outstanding quality. In every single Hettich product. How do we keep this promise? With the passion, expertise and
More informationFolding door system: WingLine L
: WingLine L Your contact: Hettich Marketing- und Vertriebs GmbH & Co. KG Gerhard-Lüking-Str. 10 602 Vlotho Germany P.O. Box 1743 591 Vlotho Phone: +49 5733 798 0 Fax: +49 5733 798 201 E-mail: info@de.hettich.com
More informationOFFICE & WARDROBE HANGING RAILS AND FITTINGS 696 HANGERS AND STORAGE 700 DESK CABLE COVERS 705 FURNITURE LEGS 706 DESK LOCKS 707 CASTORS 711
OFFICE & WARDROBE HANGING RAILS AND FITTINGS 696 HANGERS AND STORAGE 700 desk KEYBOARD TRAY 704 DESK CABLE COVERS 705 FURNITURE LEGS 706 DESK LOCKS 707 CASTORS 711 FILE ACCESSORIES 714 CD & DVD HOLDER
More informationKITCHEN FITTINGS
www.hafele.com KITCHEN FITTINGS Häfele Group since 1923 Häfele Worldwide Häfele is an internationally organized family owned and operated business with headquarters in Nagold, Germany. It was founded in
More informationK17.13 DOOR STAYS K17 DOORS
K17 DOORS K17.13 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door stays n 684(C)-500...K17.13.03 1.1.
More informationFurniture Fittings Locks and Catches
Dead bolt rim lock Spring bolt rim lock Backset D 25 mm, short bolt travel Backset D 25 mm Cylinder housing length Area of application: For cylinder cores that are inserted from the : Nickel plated Cylinder
More informationHinges Drawer Slides Drawer Systems Accessories
NÜVO Conceived and designed in Europe Hinges Drawer Slides Drawer Systems Accessories NÜVO A u g u s t 2 0 1 3 e d i t i o n LIFETIME WARRANTY HINGES NÜVO 8mm Dowels Screw-in S Self-Close 11 mm Ø 8 mm
More informationEA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60
EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in
More informationH A W A. Folding Concepta 25. Flush when closed, completely open. Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door.
Flush when closed, completely open. Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door. D e s c r i p t i o n Flush cabinet fronts open fully end to end with HAWA-Folding Concepta
More informationSlido Classic 80-N & Smuso Soft Close
Slido Classic 80-N & Smuso Soft Close sliding door solutions from Häfele Slido Sliding Door Fittings Slido - Sliding door fittings from Häfele Häfele supplies sliding doors for any application under the
More informationAccessories. The extensive accompaniment for glass doors.
The extensive accompaniment for glass doors. CONTENTS Materials and surface finishes 138 Product information Door rails 139-140 Door holders 141 Hinges - special applications 142 Door stop and strike plates
More informationC12.11 SALTO 4208 C12 SIDE HUNG WINDOWS
C12 SIDE HUNG WINDOWS C12.11 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationFURNITURE TECHNOLOGY A HOLISTIC VIEW. ELECTRIFYING.
BUILDING. OPENING. OUTFITTING. FURNITURE TECHNOLOGY A HOLISTIC VIEW. ELECTRIFYING. www.hafele.com INTERZUM HIGHLIGHTS NEW PRODUCTS 2017 TABLE OF CONTENTS Introduction Furniture A holistic view... 1 Building
More informationG11.11 INVISITOP FOR BOTTOM HUNG WINDOWS
G11 FAN LIGHT WINDOWS G11.11 50141 FOR BOTTOM HUNG WINDOWS 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationTHE ELEGANCE OF OPENING.
2 SLIMMER LIGHTER SIMPLER THE ELEGANCE OF OPENING. FLAPS FOR MAXIMUM FREEDOM IN MOTION. ENGINEERED BY HÄFELE. The fittings of the Free family give flaps new freedom in movement. This opens up more opportunities
More informationHigh quality hinge with integrated dampening. sensys.
High quality hinge with integrated dampening. sensys. Technik für Möbel 2 sensys. Perfect design, perfect action Hettich s first hinge with integrated dampening sensys marks the latest generation in hinge
More informationConspicuously inconspicuous: Sensys hinge in obsidian black
Conspicuously inconspicuous: Sensys hinge in obsidian black Hettich NZ Ltd 18 Barmac Place East Tamaki, Auckland Free phone 0800 438 842 Free fax 0800 7 847 sales_nz@hettich.co.nz hettich.com shop.hettich.com
More informationMH3. Door Stops (Floor Mounts) Door Stops (Wall Mounts) Door Holders (Door Mounts)
CH-202NS...MH20 DB-008...MH11 DB-036a...MH11 DC-011...MH23 DC-018...MH21 DC-063...MH23 DC-070...MH12 DG-106N...MH21 DG-109...MH21 DG-110...MH21 DG-111...MH21 DP-042...MH23 DP-042L...MH23 DS-003...MH 4
More informationFurniture Fittings Hinges and Flap Fittings
Glass door hinge Area of application: For inset glass doors Glass door height: Max 1,200 mm Glass door width: Max 400 mm For door weight: Max 10 kg Material: Zinc alloy, steel, PVC Glass thickness: 6-10
More informationSturdy hinge with added value. SlideOn
Sturdy hinge with added value. SlideOn SlideOn easy to use, great performance SlideOn is extremely easy to fit, simply sliding on in seconds flat. Combining SlideOn with Hettich Direkt mounting plates
More informationTIOMOS HINGES TIOMOS HINGE SYSTEM. The hinge system for the door to the future.
TIOMOS HINGES TIOMOS HINGE SYSTEM The hinge system for the door to the future. www.grassusa.com The hinge system for the door to the future: Maximum Stability. Integrated Soft-close. Total Design. Our
More informationCabinets PROLINE. Modifications. Overview Cabinets Climate Control Cases Subracks/ 19" chassis Modules...
Overview... 0 Cabinets Cabinets... 1 Climate Control... 2 Cases... 3 Subracks/ 19" chassis... 4 Modules... 5 41003002 Systems... 6 Power supply units... 7 Backplanes... 8 41096005 41096010 Grid Assembly
More informationHandles Hinges Furniture
Handles Hinges Furniture ECO TYPE MI-109 Soft Closing Hinge With Cam Adjustment (50,000 Opening Cycles) MI-119 Soft Closing Hinge (0,000 Opening Cycles) HYB-5/8 Short Arm Soft Closing Hinge SHG2-09/SPG
More informationFurnital srl via Manzoni Montano Lucino (Co) - Italy Tel Fax
Furnital srl via Manzoni 11 22070 Montano Lucino (Co) - Italy Tel. +39 031 605386 Fax. +39 031 4721516 info@furnital.it www.furnital.it THE COMPANY profile Furnital would like to be considered as a valuable
More informationThe fast assembly concealed hinges for all applications: Intermat and Sensys
The fast assembly concealed hinges for all applications: Intermat and Sensys Hettich New Zealand 18 Barmac Place East Tamaki, Auckland Phone: (64) 9274 4036 Free Phone: 0800 4 38 84 24 Fax: (64) 9274
More informationKitchen Fittings Waste Bins
Single waste bin, capacity 1 litres Carcase width: Min. 400 mm Version: For left and right hand use Installation: Screw fixing to side panel Steel housing plastic coated white, plastic bin light grey,
More informationQuadro V6 IW21 full extension drawer slide
Quadro V6 IW full extension drawer slide Quadro V6 IW full extension drawer slide Meets or exceeds ANSI/BHMA 56.9 grade requirements Dynamic load capacity up to 75 lbs* (total, drawer incl. contents) Choose
More informationJdB cassette. Version 1.03 Sun Protection AVZ 3J.1
Version 1.0 Sun Protection AVZ J.1 J.2 Sun Protection AVZ Version 1.0 4211 424-000 Alu wall bracket JdB 95 mm Mill finish 4211 424-006 Idem RAL 9010 pure white 4211 424-755 Idem (* = Textured) RAL 7016
More informationSliding Systems for. Glass Doors and Wooden Doors. MANTION slidingsystems. The French touch makes the difference. d ep uis
Sliding Systems for Glass oors and Wooden oors MAE IN FRANCE d ep uis 1 92 0 MANTION slidingsystems The French touch makes the difference. Content P.3 P.5 P.7 P.9 P.11 P.13 STRAIGHT SLIING OORS for glass
More informationAVENTOS. Mitred and rebated applications.
AVENTOS Mitred and rebated applications www.blum.com AVENTOS Mitred and rebated applications Mitred application AVENTOS HF bi-fold lift system Rebated application AVENTOS HF bi-fold lift system Mitred
More informationGRASS StUDIo DWD-xP. exclusively by Häfele.
GRASS StUDIo DWD-xP exclusively by Häfele. www.hafele.co.nz GRASS CAtAloGUe / 2016 GRASS StUDIo DWD-xP StUDIo Drawer Systems - Versatile and Comprehensive. the GRASS StUDIo DWD-xP Drawer System is a product
More informationTelescopic slides 603
603 Technical information for telescopic slides Construction: consist of two or more ball-bearing supported guide rails mounted one inside another that can be pulled out like a telescope. The load rating
More informationC14.12 WINDOW STAYS C14 SIDE HUNG WINDOWS
C14 SIDE HUNG WINDOWS 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays series 681-.. and n 684-12....03
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationSita. Model no. 189 Champagne finish, Highlights Timber oak finish. Tested for Harmful. Emission Tested CERTIFIED
Model no. 189 Champagne finish, Highlights Timber oak finish Tested for Harmful Emission Tested CERTIFIED 1 Tested for Harmful Emission Tested CERTIFIED 2 Wardrobes with bi-fold-panorama doors Interior:
More informationGRASS Drawer Program. September New Product Release
GRASS Drawer Program September 2007 New Product Release Grass Nova Pro Drawer Runners Even Better Sliding It doesn t slide - it glides. Grass Nova Pro drawers run silently and silky smooth, for the life
More informationWaste Bins 5 ³ ² 5.1
Waste Bins.1 Single waste bin, capacity 1 litres Carcase width: Min. 400 mm Version: For left and right hand use Installation: Screw fixing to side panel Steel housing plastic coated white, plastic bin
More informationwww.hafeleindia.com www.hafeleindia.com STILE DOOR HARDWARE BY HAFELE An office that is too noisy can be unnerving. With the popularity of predominantly open commercial spaces, there is a growing need
More informationUS FUTABA ESTABLISHED 1983 NEW IN THIS SECTION OFFICE LINE. Short Type 4 5-1/8" ( mm) 23.5 Ø /4" 45 mm. 1-3/16" 30 mm 5/8" 15.
0 5 1-3/4" 1-3/16" 30 5/8" 15.8 15 ESTABLISHED 1983 31/64" 1 Ø 100 Ø + 1/" 1" 1/8" NEW IN THIS SECTION " Short Type 4 5-1/8" (100 130 ) Ø =, & 80 11 13 0 Ø 6 Extra Heavy Duty Adjustable Floor Leveler (Page
More informationIndustrial and Stainless Steel Track and Hardware Pg 53. Straight Sliding Industrial wood. Door Hardware metal
Contents Introduction to P C Henderson Pg 2 Commercial Straight Sliding Systems Pg 3 Husky Husky Pacer Pacer Flexirol Commercial Folding Systems Pg 14 Husky Pacer Centerfold Pacer Endfold Pacer Endfold
More informationFLAIR FRAMELESS CLEAN EASY RISING BUTT HINGE MECHANISM FOR SMOOTH MOVEMENT. HEIGHT 1950mm 6GLASS THICKNESS MAGNETIC CLOSURE
FLEXIBILITY IS KEY TO THE FLAIR CONCEPT. THIS CLEVERLY DESIGNED RANGE IS BOTH WETROOM AND APPLICATION 1950 MAGNETIC CLOSURE RISING BUTT HINGE MECHANISM FOR SMOOTH MOVEMENT CLEAN EASY COATING REVERSIBLE
More informationC.4.CHRONO TILT AND TURN
C.4. Contents General characteristics................... Base set n 31111, 31112 and 31113...... Centre locking set n 30140-30........... Selection of rods n 30000-................ page C.4.2 C.4.5 C.4.6
More information9.3 Fittings for wardrobe interiors 9.3.0
9.3 Fittings for wardrobe interiors 9.3.0 Interior fittings for wardrobes 9.3 Fittings for wardrobe interiors Interior fittings for wardrobes 9.3.1 Range summary 9.3 Fittings for wardrobe interiors i Rota
More informationHELM Hardware for Sliding Gates. Sliding hardware
HELM Hardware for Sliding Gates Sliding hardware HELM Hardware for Sliding Gates Contents General Information General Information Page 3 Hardware for Sliding Gates General Information, HELM 00 - HELM 700
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationImportant information
Important information Intellectual property Titus International reserves all intellectual property rights worldwide for all information contained in this brochure. Responsibility It is the responsibility
More informationB12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS
B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationPart-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A
*Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT
More information4.1. Programme overview Group 4. Top-running, flush sliding-door fitting InLine P
i Programme overview Group 4 Top-running, flush sliding-door fitting InLine P 4. - 4.9 Top-running sliding-door fitting TopLine with Easys 4.10-4.17 Top-running sliding-door fitting TopLine 35 4.18-4.5
More informationThe Essentials Architectural Hardware. The Essentials Architectural Hardware. Electronic Locking Systems - DT Lite (Residential Version)
Electronic Locking Systems - DT Lite (Residential Version) Contemporary Door Knobsets DT Lite is an Electronic Identifi cation and Locking System for secure and simple access. The access cards are easy
More informationSISO GLASS. fittings. - high quality furniture fittings
SISO GLASS fittings - high quality furniture fittings - high quality furniture fittings SISO A/S MILEPARKEN 11 DK - 270 SKOVLUNDE (COPENHAGEN) DENMARK PHONE: (+5) 5 80 900 FAX: (+5) 5 80 DISTRIBUTOR SAUNA
More informationLock Junior Office Classic 48 50
junior office classic Junior Office Classic convince with timeless classic design. Engineered for high frequented doors, they achieve a large stress capacity. The numerous types fulfill variable requirements.
More informationKINVARO KINVARO LIFTER SYSTEMS. Modern design, innovative technology and ease of operation for wall cabinetry.
KINVARO KINVARO LIFTER SYSTEMS Modern design, innovative technology and ease of operation for wall cabinetry. www.grassusa.com Exclusive lifter systems Kinvaro provides the perfect solution for every application.
More informationFeatures and Benefits
Features and Benefits Max door panel weight is 75kg Max overall unit height is 2700mm Max door panel width is 900mm No drilling required for flushbolts or locking systems Concealed bottom channel for improved
More informationATELIER F/R - Business Line
Functional and secure: A quality product for high frequency doors. CONTENTS Technical details - 9 Materials and surface finishes 80 Product information Locks 81-8 Maxi-locks and panic function 8 Hinges
More informationSLIDING & FOLDING DOOR SERIES ARCHITECTURAL HARDWARE
SLIDING & FOLDING DOOR SERIES ARCHITECTURAL HARDWARE 2003 2013 148 SLIDING DOOR FITTINGS SGSF-SGWS0 Silent Sliding Door Hanger Set *Pre order with minimum MOQ required Features For 1- and 2-leaf sliding
More informationPro-Line II Filing Frame
Pro-Line II Filing Frame Efficiency in the office. The Pro-Line II filing frame is the perfect solution for professional equipment of office cabinets. It combines innovative technology with highly functional
More informationDouble action door rails
The solution for heavy doors. Convincing in quality and design. CONTENTS Technical details 26-29 Materials and surface finishes 290 Product information 105 mm door rails: 55/65 mm pivot point 291-292 22/24
More informationConcealed hinges. Premium hinge systems for cabinet doors. blum.com
Concealed hinges Premium hinge systems for cabinet doors blum.com Quick reference Simple planning and ordering lum offers many on-line tools to help you with your kitchen planning and ordering. Planning
More informationMisura. Tested for Harmful proofed Emission Tested proofed CERTIFIED
Tested for Harmful proofed Emission Tested proofed CERTIFIED - 1.01.019 Please specify the05.0.018 exact colour combination of front and carcase colour for each order! 1 Carcase and front colours Designs:
More informationRoller runner systems FR
Roller runner systems FR Technik für Möbel 191 Roller runner system FR 30 with one-sided captive guide rail for screw-on assembly 5 runner lengths 300-500 mm Finish: white Load capacity 55 lbs K.C.M.A.
More informationPro-Line II Filing Frame
Pro-Line II Filing Frame Efficiency in the office. The Pro-Line II Filing Frame is the perfect solution in regards to the professional equipment of office cabinets. It combines innovative technology with
More informationOrdering information for face frame and panel
Ordering information for face frame and panel Well suited for small wall cabinets Cabinet height from 238 (9-3/8") to 60 (24") Interior depth minimum 27 (5") 3b 4a 4b 5 Closes silently and effortlessly
More informationC13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationA70 ARCADE ENDFOLD & CENTREFOLD FOLDING DOORS ALUMINIUM SECTIONS BOTTOM ROLLER TIMBER DOORS
CI/SfB (31.54) Xt7 A R C A D E ENDFOLD & CENTREFOLD A70 E A C H D O O R W E I G H T M A X 7 0 k g ISSUE 1 ARCADE FOLDING DOORS ALUMINIUM SECTIONS BOTTOM ROLLER TIMBER DOORS H E N D E R S O N APPLICATION
More informationWeld-on Hinges Weld-on Hinges
54 53 Weld-on Hinges 7004.00 Satin Brass Washer Pin Grease Nipple Weld-on Hinges 7004.90 Aluminium Satin Stainless Washer Stainless Pin Grease Nipple 55 Weld-on Hinges 7005.00.080, 7005.00.100 Satin Brass
More informationHINGES Weld-on Hinges Steel. Weld-on Hinges Steel. MATERIAL Steel. FINISH Raw. FEATURES Brass Washer Steel Pin Grease Nipple
47 48 Weld-on Hinges 7004.00 Raw Brass Washer Pin Grease Nipple Weld-on Hinges 7010.00 Raw Brass Washer Pin 49 Weld-on Hinges 7005.00.080, 7005.00.100 Raw Brass Washer Brass Pin Grease Nipple 7005.00.080
More informationA12.11 SALTO 4008 A12 TURN-TILT WINDOWS
A12 TURN-TILT WINDOWS A12.11 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More information