new harsh environment SEALED CONNECTORS nterconnect dual seals for harsh environments ergonomic locking tab for easier mating compatibility AT Series plug wedges ensure a proper seal placement and contact alignment temperature rating: -55 C to 125 C (-67 F to 257 F) dielectric materials have a flammability rating of UL94 HB AT Series receptacle pin contacts 60 contact area
superior performance. AT Series connectors are designed with dual seals and ergonomic locking clip, and can work directly with or replace existing industry products. material specifications general specifications plug/receptacle thermoplastic shell thermoplastic wedge silicone rubber grommet contacts copper alloy pin copper alloy socket nickel-plated finish (optional gold) sealing plugs: all sizes of thermoplastic dielectric withstanding voltage: current leak less than 2 milliamps at 1500 VAC insulation resistance: 1000 megaohms minimum 25 C current ratings: size 16: 1 amps (contact current rating at 125 C continuous) submersion: wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage fluid resistance: connectors show no damage when exposed to most fluids used in industrial application vibration: no unlocking or unmating. Exhibits no mechanical or physical damage after sinusoidal vibration levels of 20G s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. temperature: operative at temperatures from -55 C to +125 C. Continuous at rated current. contact retention: contacts withstand a minimum load of 25 lbs (89N) for size 16 thermal cycle: no cracking chipping or leaking after 20 test cycles from -55 C to +125 C durability: no electrical or mechanical defects after 100 cycles of engagement and disengagement AT Series Deutsch DT Series
new Create a UV/weather-resistant, multi-pin connection with our new line of AT Series connectors. Connector housings feature a silicone elastomer wire seal and are available in 2- to 12-pin configurations. When connected together, an integral latching system ensures a definitive electrical and mechanical connection that meets SAE J200, IP67 and IP69K testing specifications. AT Series receptacle housings are made from a thermoplastic material that offers durability and UV resistance for the receptacle assembly. Each receptacle includes a silicone elastomer wire seal to help prevent environmental ingress. To complete a receptacle assembly, one AT Series receptacle housing, receptacle wedge and receptacle pins are required. All AT Series receptacle assemblies mate directly with Deutsch DT Series plug housings/assemblies. The thermoplastic material is rated to -55 C to 125 C (-67 F to 257 F) and meets UL94 HB rating. 14062200 14066200 14062200 2-way receptacle housing, AT04-2P $0.56 ea $0.51 ea $0.4 ea $0.8 ea 1406200 -way receptacle housing, AT04-P $0.99 ea $0.66 ea $0.56 ea $0.49 ea 14064200 4-way receptacle housing, AT04-4P $1.28 ea $0.88 ea $0.75 ea $0.66 ea 14066200 6-way receptacle housing, AT04-6P $2.2 ea $1.4 ea $1.14 ea $1.01 ea 14068200 8-way receptacle housing, AT04-8P $2.41 ea $1.81 ea $1.54 ea $1.6 ea 14061220 12-way receptacle housing, AT04-12P $.49 ea $2.49 ea $2.12 ea $1.87 ea AT Series receptacle wedges are made from thermoplastic material and are a necessary component in aligning your receptacle pins into proper position within the receptacle housing assembly. One wedge is required per receptacle to complete the assembly. AT Series receptacle wedges DO NOT interchange with Deutsch DT Series receptacles wedges. 14162200 14166200 14162200 2-way receptacle wedge, AW2P $0.09 ea $0.08 ea $0.07 ea $0.06 ea 1416200 -way receptacle wedge, AWP $0.09 ea $0.08 ea $0.07 ea $0.06 ea 14164200 4-way receptacle wedge, AW4P $0.14 ea $0.1 ea $0.11 ea $0.10 ea 14166200 6-way receptacle wedge, AW6P $0.18 ea $0.16 ea $0.14 ea $0.12 ea 14168200 8-way receptacle wedge, AW8P $0.29 ea $0.21 ea $0.18 ea $0.15 ea 14161220 12-way receptacle wedge, AW12P $0.29 ea $0.21 ea $0.18 ea $0.15 ea AT Series receptacle pin contacts complete the electrical connection for a receptacle housing assembly. Three different quality grades of contacts are available. All feature a copper alloy base with either a standard stamped/formed nickel-plate, military solid crimp nickel- or gold-plate. Seal plugs are made of a silicone elastomer and can be used to plug any open or unused receptacle pin position. AT Series pins and seals are interchangeable with Deutsch DT Series receptacle pins and mate directly to Deutsch DT Series plug contacts. 14601422 1460162 14601422 stamped/formed pin, nickel-plated, 14-16 gauge, AT60-14-0122 $0.2 ea $0.18 ea $0.15 ea $0.1 ea 14601622 stamped/formed pin, nickel-plated, 16-18 gauge, AT60-16-0122 $0.2 ea $0.18 ea $0.15 ea $0.1 ea 14602024 solid crimp pin, nickel-plated, 16-18 gauge, AT60-202-16141 $0.4 ea $0.28 ea $0.24 ea $0.21 ea 1460202 solid crimp pin, gold-plated, 16-18 gauge, AT60-202-161 $0.72 ea $0.4 ea $0.7 ea $0.4 ea 14114017 sealing plug, silicone elastomer A114017 $0.40 ea $0.1 ea $0.28 ea $0.20 ea
1406100 14066100 AT Series plug housings are made from a thermoplastic material that offers durability and UV resistance for the plug assembly. Each plug includes one silicone elastomer wire seal and front housing seal to help prevent environmental ingress. To complete a plug assembly, one AT Series plug housing, plug wedge and plug contacts are required. All AT Series plug assemblies mate directly with Deutsch DT Series receptacle housings/assemblies. The thermoplastic material is rated to -55 C to 125 C (-67 F to 257 F) and meets UL94 HB rating. 14062100 2-way plug housing, AT06-2S $0.80 ea $0.50 ea $0.44 ea $0.9 ea 1406100 -way plug housing, AT06-S $1.05 ea $0.74 ea $0.6 ea $0.55 ea 14064100 4-way plug housing, AT06-4S $1.75 ea $0.96 ea $0.82 ea $0.72 ea 14066100 6-way plug housing, AT06-6S $2.46 ea $1.40 ea $1.19 ea $1.05 ea 14068100 8-way plug housing, AT06-8S $2.76 ea $2.47 ea $2.10 ea $1.85 ea 14061210 12-way plug housing, AT06-12S $.1 ea $2.96 ea $2.52 ea $2.22 ea AT Series plug wedges are made from thermoplastic material and are a necessary component in aligning your plug contacts into the proper position within the plug housing assembly. One wedge is required per plug housing to complete an assembly. AT Series plug wedges DO NOT interchange with Deutsch DT Series plug wedges. 14162100 14166100 14162100 2-way plug wedge, AW2S $0.12 ea $0.10 ea $0.08 ea $0.07 ea 1416100 -way plug wedge, AWS $0.12 ea $0.10 ea $0.08 ea $0.07 ea 14164100 4-way plug wedge, AW4S $0.18 ea $0.16 ea $0.1 ea $0.12 ea 14166100 6-way plug wedge, AW6S $0.20 ea $0.19 ea $0.16 ea $0.14 ea 14168100 8-way plug wedge, AW8S $0.29 ea $0.22 ea $0.18 ea $0.16 ea 14161210 12-way plug wedge, AW12S $0.29 ea $0.22 ea $0.18 ea $0.16 ea AT Series plug socket contacts complete the electrical connection for a plug housing assembly. Three different quality grades of contacts are available. All feature a copper alloy base with either a standard stamped/formed nickel-plate, military solid crimp nickel- or gold-plate. Seal plugs are made of a silicone elastomer and can be used to plug any open or unused plug contact position. AT Series socket contacts and seals are interchangeable with Deutsch DT Series plug contacts and mate directly to Deutsch DT Series receptacle pins. 14621422 1462201 14621422 stamped/formed socket, nickel-plated, 14-16 gauge, AT62-14-0122 $0.4 ea $0.29 ea $0.26 ea $0.24 ea 14621622 stamped/formed socket, nickel plated, 16-18 gauge, AT62-16-0122 $0.4 ea $0.29 ea $0.26 ea $0.24 ea 14622014 solid crimp socket, nickel-plated, 16-18 gauge, AT62-201-16141 $0.4 ea $0.5 ea $0.0 ea $0.27 ea 1462201 solid crimp socket, gold-plated, 16-18 gauge, AT62-201-161 $0.87 ea $0.5 ea $0.46 ea $0.41 ea 14114017 sealing plug, silicone elastomer A114017 $0.40 ea $0.1 ea $0.28 ea $0.20 ea
superior design. AT Series connectors and terminals are designed for high performance applications in the heavy-equipment, automotive, agricultural, alternative energy and any other field that demands the ultimate in performance. sealing plugs (optional) contacts are derived from quality copper alloy material. Available in standard stamped/formed nickel-plated and military style solid crimp nickelor gold-plated. Terminals are interchangeable with competitive Deutsch DT Series connectors. rear seal ensures a tight environmental seal at point of wire entry. ergonomically designed clip The increased size and tactile design of our clips allow for easier mating and unmating. recessed sealing area The recessed cavity allows for a secure fitting front seal. front seal The superior design ensures a tight environmental seal when used in conjunction with the recessed cavity of the connector body. wedge with Added Seal Retention The added seal retention feature ensures that the Front Seal does not move out of place.