Laboratory Equipment. Tel: +44 (0) u Fax: +44 (0) u

Laboratory Equipment 78 Load Measurement 78 Drying and Weighing 79 Test Sieves 80 Sieve Shakers 81 Laboratory Hardware 82 Glass and Plastic Ware 82 Temperature Measurement 82 General 85 Mobile Laboratories 130 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

78 Laboratory Equipment - Load Measurement Load Rings Calibrated in Compression Typical load measurement applications for load rings Clamped Boss Load Rings u u u Repeatability within 0.2% of indicated load Accuracy within ±1% of indicated load Works calibrated ELE Clamped Boss Load Rings are available in the range 1 kn to 50 kn. The available capacities and performance of ELE load rings satisfy the requirements for accurate load measurement for a wide range of testing applications. The repeatability and accuracy of all clamped boss rings comply with the requirements of NIS 0415 Accreditation for the Calibration of Force Measuring Rings and Load Cells used in Soil Testing. The repeatability of all load rings is within 0.2% of indicated load and accuracy is ±1% of indicated load over the upper 80% of the working range, at the calibration loads. All clamped boss load rings are calibrated in kn and supplied with a calibration chart. Complete with a detachable nipple, all rings are supplied in a protective foam moulding. Capacity Typical design sensitivity number kn kgf lbf N/div kgf/div lbf/div Overall height mm Approx weight kg EL78-0060 2.0 200 450 1.3 0.13 0.30 248 3.2 EL78-0160 3.0 300 650 2.0 0.20 0.43 248 3.3 EL78-0260 4.5 450 1000 Complete with a detachable nipple, all rings, are 3.0 0.30 0.66 248 3.5 supplied EL78-0460 in a protective foam 10.0 moulding. 1000 2250 7.7 0.77 1.73 248 4.6 EL78-0760 28.0 2800 6000 25.5 2.54 5.45 248 5.4 EL78-0860 50.0 5000 11200 45.5 4.54 10.18 248 7.9 131 For 24/7 online ordering, payment & order tracking go to www.ele.com

78 Laboratory Equipment - Load Measurement Electronic Balances Catalogue Capacity Resolution Pan Size Mains and Battery Dimensions (l x w x h) EL78-5335/01 250 g x 0.1 mg 100 mm dia 470 x 185 x 280 mm 12 kg EL78-5405/01 450 g x 0.001 g 125 x 125 mm 300 x 205 x 90 mm 6 kg EL78-5447/01 2500 g x 0.01 g 160 x 160 mm 260 x 170 x 90 mm 6 kg EL78-5456/01 4500 g x 0.01 g 160 x 160 mm 260 x 170 x 90 mm 6 kg EL78-5457/01 8000 g x 0.1 g 225 x 300 mm YES 340 x 320 x 125 mm 4 kg EL78-5477/01 16000 g x 0.5 g 225 x 300 mm YES 340 x 320 x 125 mm 4 kg EL78-5485/01 20000 g x 0.1 g 340 x 300 mm 314 x 460 x 125 mm 18 kg EL78-5527/01 32000 g x 1.0 g 225 x 300 mm YES 340 x 320 x 125 mm 6 kg EL78-5655/01 60000 g x 5.0 g 425 x 525 mm YES 700 x 425 x 950 mm 15 kg EL78-5666/01 75000 g x 20.0 g 310 x 300 mm YES Base 300 x 310 x 50 mm Indicator 80 x 270 x 30 mm 5 kg For 220 240 V AC, 50 60 Hz, 1 ph. 132 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

78 Laboratory Equipment - Load Measurement Mechanical Balances EL78-7090 Harvard Trip Balance EL78-7140 Triple Beam Balance EL78-7600 Heavy-duty Solution Balance number Capacity Resolution Pan size (diameter) Overall dimensions (l x w x h) EL78-7090 Harvard Trip Balance 2000 g 0.1 g 2 x 150 mm 152 x 356 x 254 mm 2.7 kg EL78-7110 Set of s for EL78-7090 2.5 kg EL78-7140 Triple Beam Balance 2610 g 0.1 g 150 mm 470 x 180 x 150 mm 3.2 kg EL78-7600 Heavy-duty Solution Balance 20000 g 1.0 g 280 mm 279 x 864 x 279 mm 20.0 kg 133 For 24/7 online ordering, payment & order tracking go to www.ele.com

78 Laboratory Equipment - Drying and Weighing Rapid Drying Hotplate A hotplate offers an alternative method of drying materials in bulk. Even heat distribution is not as good as an enclosed chamber, however sensible use of the hotplate will often enable test requirements to be met satisfactorily. Specification Construction Nominal diameter Cast-iron top and base ventilated sheet-steel body 200 mm Maximum temperature 500ºC Rated power 2000 W 5 kg EL78-2950/01 Hotplate fitted with a Simmerstat heat control unit. For 220 240 V AC, 50-60 Hz, 1 ph. Digital Hotplate EL78-2950/01 Hotplate Specification Dimensions Construction Maximum temperature 300 x 1ºC Rated power 520 x 360 x 130 mm Robust metal with anodised aluminium plate heated surface 1500 W EL78-3104/01 Digital Hotplate EL78-3104/01 Digital Hotplate fitted with digital setting of plate temperature controlled via microprocessor. Includes digital temperature indication. Temperature display resolution of ±1 C. For 220 240 V AC, 50 Hz 1ph. 134 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

78 Laboratory Equipment - Drying and Weighing Large Capacity Drying Oven These ovens are designed for drying large quantities of soils and aggregate samples and maintain temperature in accordance with BS1377. Constructed from mild steel with a coated exterior and an aluminium coated steel chamber, the ovens are fitted with a thermostatic control and feature fan-circulation for even temperature distribution throughout the interior. A safety overheat thermostat is fitted as standard and the units are supplied with the temperature indicator pre-set to 105 110 C. Note: these ovens have a 2-year warranty. Specification Capacity Dimensions (l x w x h) External Internal Fluctuation Rated power heater elements Shelves supplied 3 Shelf positions 4 EL78-0110/01 225 litre Drying Oven. For 220 240 V AC, 50-60 Hz, 1 ph. Accessory 225 litres 540 x 1040 x 940 440 x 920 x 600 ± 0.75 C 2000 W 80 kg EL78-1245 Dial Thermometer. 0 300 C, 40 mm diameter dial with collar fixing for door. General Purpose Ovens These ovens meet the requirements of BS 2648, 598, 1377 and 1924. The exterior is constructed from sheet steel finished in powder coated paint. The chambers are made from aluminium clad mild steel, fitted with shelf runners and wire grid shelves. All units are fan circulated and fitted with direct reading thermostat and overheat thermostat. EL78-0110/01 225 litre Drying Oven EL78-1215/01 50 litre Drying Oven EL78-1215/01 50 litre Drying Oven. For 220 240 V AC, 50-60 Hz, 1 ph. EL78-1225/01 100 litre Drying Oven. For 220 240 V AC, 50-60 Hz, 1 ph. EL78-1235/01 150 litre Drying Oven. For 220 240 V AC, 50-60 Hz, 1 ph. Specification EL78-1215 Series EL78-1225 Series EL78-1235 Series Capacity 50 litres 100 litres 150 litres Dimensions (l x w x h) External Internal 570 x 610 x 580 330 x 490 x 330 700 x 610 x 700 460 x 490 x 450 780 x 610 x 800 540 x 490 x 550 Temperature range 40 to 250 C 40 to 250 C 40 to 250 C Fluctuation ± 0.75 C ± 0.75 C ± 0.75 C Rated power heater elements 1000 W 1200 W 1500 W Shelves supplied 2 3 3 Shelf positions 3 4 5 26 kg 44 kg 60 kg 135 For 24/7 online ordering, payment & order tracking go to www.ele.com

79 Laboratory Equipment - Test Sieves Test Sieves Particle Size Analysis Particle Size Analysis is probably performed in most, if not all, laboratories engaged in testing materials for civil engineering applications. The range of sieves offered include ISO, EN, BS and ASTM sieves. Woven wire test sieves are manufactured from stainless steel mesh. Perforated plate test sieves are manufactured from tinned steel plate. All test sieves, unless otherwise indicated, are supplied with full-depth frames. Woven Wire Mesh Sieves British Standard Sieves BS 410/ISO 3310 Aperture size Frame diameter 200 mm 300 mm 38 µm EL79-0040 EL79-2040 45 µm EL79-0050 53 µm EL79-0060 63 µm EL79-0070 EL79-2070 75 µm EL79-0080 EL79-2080 80 µm EL79-0085 EL79-2085 90 µm EL79-0090 EL79-2090 100 µm EL79-0095 EL79-2095 106 µm EL79-0100 125 µm EL79-0110 EL79-2110 150 µm EL79-0120 EL79-2120 160 µm EL79-0125 180 µm EL79-0130 EL79-2130 200 µm EL79-0135 EL79-2135 212 µm EL79-0140 EL79-2140 250 µm EL79-0150 EL79-2150 300 µm EL79-0160 EL79-2160 315 µm EL79-2165 355 µm EL79-0170 EL79-2170 400 µm EL79-0175 EL79-2175 425 µm EL79-0180 EL79-2180 500 µm EL79-0190 EL79-2190 600 µm EL79-0200 EL79-2200 630 µm EL79-2205 710 µm EL79-0210 800 µm EL79-0215 850 µm EL79-0220 EL79-2220 1.00 mm EL79-0230 EL79-2230 1.18 mm EL79-0240 EL79-2240 1.25 mm EL79-0245 EL79-2245 1.40 mm EL79-0250 1.60 mm EL79-0255 EL79-2255 1.70 mm EL79-0260 EL79-2260 2.00 mm EL79-0270 EL79-2270 2.36 mm EL79-0280 EL79-2280 2.50 mm EL79-0285 EL79-2285 2.80 mm EL79-0290 EL79-2290 3.35 mm EL79-0300 EL79-2300 4.00 mm EL79-0310 EL79-2310 4.75 mm EL79-0320 EL79-2320 6.70 mm EL79-0340 Special Note: Sizes and models highlighted in this colour comply to ISO 3310. Sizes and models highlighted in this colour comply to EN933-2. 136 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

79 Laboratory Equipment - Test Sieves Perforated Plate Sieves (Square Hole) British Standard Sieves BS 410/ISO 3310 Aperture size Frame diameter 200 mm 300 mm 4.00 mm EL79-1500 EL79-2500 4.75 mm EL79-1510 EL79-2510 5.00 mm EL79-1515 EL79-2515 5.60 mm EL79-2520 6.30 mm EL79-1525 EL79-2525 6.70 mm EL79-1530 EL79-2530 8.00 mm EL79-1540 EL79-2540 9.50 mm EL79-1550 EL79-2550 10.0 mm EL79-1555 EL79-2555 11.2 mm EL79-2560 12.5 mm EL79-1565 EL79-2565 13.2 mm EL79-1570 EL79-2570 14.0 mm EL79-1575 EL79-2575 16.0 mm EL79-1580 EL79-2580 19.0 mm EL79-1590 EL79-2590 20.0 mm EL79-1595 EL79-2595 22.4 mm EL79-2600 25.0 mm EL79-1605 EL79-2605 28.0 mm EL79-1615 EL79-2615 31.5 mm EL79-1630 EL79-2630 37.5 mm EL79-1640 EL79-2640 40.0 mm EL79-2645 45.0 mm EL79-2650 50.0 mm EL79-1655 EL79-2655 53.0 mm EL79-2660 63.0 mm EL79-1670 EL79-2670 75.0 mm EL79-1680 EL79-2680 80.0 mm EL79-2684 90.0 mm EL79-2690 125 mm EL79-2710 Special Note: Lids and Receivers ISO and BS Sieves Sieve diameter 200 mm 300 mm Lid EL79-0010 EL79-2010 Receiver EL79-0020 EL79-2020 Washing Sieve Sizes and models highlighted in this colour comply to ISO 3310. Sizes and models highlighted in this colour comply to EN933-2. EL79-7001 75 µm Washing Sieve. 200 mm diameter, 200 mm deep. 137 For 24/7 online ordering, payment & order tracking go to www.ele.com

79 Laboratory Equipment - Test Sieves Test Sieves ASTM E11 sieves are similar in construction to those used in the British Standard range. Woven Wire Mesh Sieves Two frame sizes are available as standard, 8 inch or 12 inch diameter. Aperture size Alternative designation Frame diameter 8 inch 12 inch 38 µm No. 400 EL79-5300 EL79-6100 45 µm No. 325 EL79-5290 EL79-6090 53 µm No. 270 EL79-5280 EL79-6080 63 µm No. 230 EL79-5270 EL79-6070 75 µm No. 200 EL79-5260 EL79-6060 90 µm No. 170 EL79-5250 EL79-6050 106 µm No. 140 EL79-5240 EL79-6040 125 µm No. 120 EL79-5230 EL79-6030 150 µm No. 100 EL79-5220 EL79-6020 180 µm No. 80 EL79-5210 EL79-6010 212 µm No. 70 EL79-5200 EL79-6000 250 µm No. 60 EL79-5190 EL79-5990 300 µm No. 50 EL79-5180 EL79-5980 355 µm No. 45 EL79-5170 EL79-5970 425 µm No. 40 EL79-5160 EL79-5960 500 µm No. 35 EL79-5150 EL79-5950 600 µm No. 30 EL79-5140 EL79-5940 710 µm No. 25 EL79-5130 EL79-5930 850 µm No. 20 EL79-5120 EL79-5920 1.00 mm No. 18 EL79-5110 EL79-5910 1.18 mm No. 16 EL79-5100 EL79-5900 1.40 mm No. 14 EL79-5090 EL79-5890 1.70 mm No. 12 EL79-5080 EL79-5880 2.00 mm No. 10 EL79-5070 EL79-5870 2.36 mm No. 8 EL79-5060 EL79-5860 2.80 mm No. 7 EL79-5050 EL79-5850 3.35 mm No. 6 EL79-5040 EL79-5840 4.00 mm No. 5 EL79-5030 EL79-5830 4.75 mm No. 4 EL79-5020 EL79-5820 5.60 mm No. 31/2 EL79-5010 EL79-5810 6.30 mm 1/4 in. EL79-5000 EL79-5800 6.70 mm 0.265 in. EL79-5490 EL79-6190 Woven Wire Mesh Sieves Aperture size Alternative designation Frame diameter 8 inch 12 inch 8.00 mm 5/16 in. EL79-5500 EL79-6200 9.50 mm 3/8 in. EL79-5510 EL79-6210 11.2 mm 7/16 in. EL79-5520 EL79-6220 12.5 mm 1/2 in. EL79-5530 EL79-6230 13.2 mm 0.530 in. EL79-5540 EL79-6240 16.0 mm 5/8 in. EL79-5550 EL79-6250 19.0 mm 3/4 in. EL79-5560 EL79-6260 22.4 mm 7/8 in. EL79-5570 EL79-6270 25.0 mm 1 in. EL79-5580 EL79-6280 26.5 mm 1.06 in. EL79-6290 31.5 mm 11/4 in. EL79-6300 37.5 mm 11/2 in. EL79-5610 EL79-6310 45.0 mm 13/4 in. EL79-6320 50.0 mm 2 in. EL79-5630 EL79-6330 53.0 mm 2.12 in. EL79-6340 63.0 mm 21/2 in. EL79-5650 EL79-6350 75.0 mm 3 in. EL79-5660 EL79-6360 90.0 mm 31/2 in. EL79-6370 100 mm 4.0 in. EL79-6380 125 mm 5.0 in. EL79-6400 Lids and Receivers ISO and BS Sieves Diameter 8 inch 12 inch Lid EL79-5400 EL79-6150 Receiver EL79-5410 EL79-6160 Sieve Brushes EL79-7200 Sieve Brush. Double-ended, brass and nylon bristle. EL79-7210 Sieve Brush. Nylon, double-ended. Sieve Brushes EL79-7000 75 µm Washing Sieve. 8 in diameter x 8 in deep. 138 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

80 Laboratory Equipment - Sieve Shakers Sieve Shaker Hand sieving of a large number of samples can often be tedious and sometimes lead to inaccuracy of results. The following machine provides a wide choice of options for the busy laboratory. ELE Sieve Shaker EN 932-5 The ELE sieve shaker is powered by an electromagnetic drive that has no rotating parts to wear making it maintenance free and extremely quiet in operation. The unit features a triple Vertical-Lateral-Rotary vibrating action that moves the sample over the sieve producing faster more efficient sieving, while the rapid vertical movements also help keep the apertures from blinding. The shaker is ideal for laboratory or on site use. It is robust, compact and sufficiently lightweight to be portable. The separate digital microprocessor controlled console unit incorporates a keypad for setting the sieving program and is isolated from any effects of vibration from the shaker. As standard the shaker includes, timer 0-999 minutes, adjustable vibration intensity and adjustable intermittent or continuous operation. EL80-0200/01 ELE Sieve Shaker The unit accepts up to ten 200 mm or 8 inch, full height, diameter sieves and lid and receiver, or up to six 300 mm or 12 inch diameter sieves and lid and receiver. EL80-0200/01 ELE Sieve Shaker complete as specified. Dimensions (l x w x h) 380 x 440 x 1085 mm. 65 kg. For 220 240 V AC, 50 Hz 1ph. 139 For 24/7 online ordering, payment & order tracking go to www.ele.com

81 Laboratory Hardware - Laboratory Hardware Laboratory Hardware The laboratory hardware listed provides a comprehensive range of products suitable for most general test applications. Stand, Bosshead and Clamp EL81-0094 Support Assembly. Comprising retort stand, bosshead and clamp. Spatulas EL81-0094 Support Assembly EL81-0100 EL81-0120 EL81-0140 EL81-0180 Spatula. 100 mm blade with wooden handle. Spatula. 150 mm blade with wooden handle. Spatula. 200 mm blade with wooden handle. Chattaway Spatula. 125 mm long. Scoops and Shovels EL81-0200 EL81-0220 EL81-0222 EL81-0240 Scoop. 70 x 110 x 40 mm, cast aluminium with handle. Scoop. 120 x 190 x 70 mm, cast aluminium with handle. Scoop. 250 mm long x 125 mm dia. stainless steel, 5 kg capacity. Shovel. With flat blade 250 x 300 mm. 3 kg. EL81-01 series Spatulas Trowels and Floats EL81-0310 Trowel. Gardeners type, stainless steel blade. EL81-0335 Trowel. Gauging with steel blade 200 mm long, complies with BS 4550. EL81-0340 Float. Plasterer s type, with steel blade 280 x 115 mm. 450 g. Scoops and Trowels 140 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

81 Laboratory Equipment - Laboratory Hardware Rubber Tubing Internal diameter Outside diameter EL81-0375 6.5 mm 16.5 mm Rubber tubing is priced per metre. EL81-0375 is suitable for vacuum applications. Watches and Clocks EL81-0375 Rubber Tubing EL81-0518 EL81-0521 Timer Clock. Battery-operated. Easy to read digital display of hours, minutes and seconds. Timer counts down and sounds beeping tone. Clock functions independently of timer. Supplied complete with battery. Dimensions 13 x 64 x 58 mm (l x w x h). Stop Watch. LCD quartz watch, features alarm, time/calendar display, 30 minute count in 1/100 sec. Battery-operated. Dimensions 20 x 60 x 80 mm (l x w x h). EL81-0518 Timer Clock Miscellaneous Laboratory Hardware Size/capacity EL81-0480 Crucible Tongs. Straight, 200 mm long 100 g EL81-0500 Heavy-duty Rubber Gloves 700 g EL81-0508 Heat-resistant Gloves, with gauntlet 500 g EL81-0594 Chisel, masonry type 300 x 20 mm 1 kg EL81-0588 Vernier Callipers 200 x 0.02 mm 100 g EL81-0590 Vernier Callipers, LCD 200 x 0.01 mm 100 g EL81-0705 Wire Brush 300 g EL81-0710 Trimming Knife 130 mm long 150 g EL81-0715 Straight Edge 455 mm long 600 g EL81-0805 Engineer s Steel Rule 300 mm 100 g EL81-4765 Polythene Bag, pack of 100 380 x 254 mm 2.5 kg EL81-4775 Polythene Bag, pack of 50 450 x 1000 mm 10.5 kg EL81-5100 Rubber Bucket 9 litres (2 gal) 3 kg 141 For 24/7 online ordering, payment & order tracking go to www.ele.com

81 Laboratory Equipment - Laboratory Hardware Moisture Content Tin and Sample Containers EL81-2979 Moisture Content Tin. Tin plate, (unnumbered). 90 mm diameter x 20 mm deep. 90 g capacity. EL81-3000 Sample Container. Tinned Steel. Lever Lid, 0.5 litres. EL81-3040 Sample Container. Tinned Steel. Lever Lid, 2.5 litres. EL81-3060 Sample Container. Tinned Steel. Lever Lid, 10 litres. EL81-3500 Sample Container. Plastic, Snap-on lid, 1 litre. EL81-3540 Sample Container. Plastic, Snap-on lid, 10 litres. EL81-3545 Transport/storage Container. 22 (approx) litres. 18 g 100 g 200 g 600 g 100 g 600 g 1 kg Sample Trays Wire Baskets Dimensions EL81-4020 EL81-4030 EL81-4080 Sample Tray. Heavy-duty, galvanised steel, nesting 306 x 306 x 38 mm. Sample Tray. Heavy-duty, galvanised steel, nesting 406 x 406 x 50 mm. Sample Tray. Heavy-duty, galvanised steel, nesting 610 x 610 x 63 mm. 1.10 kg 1.60 kg 2.60 kg EL81-4819 Wire Basket. BS 812 Type 1, EN 1367-2, 65 mm dia x 80 mm deep, 150 µm wire mesh. EL81-4821 Wire Basket. BS 812 Type 2, EN 1367-2, 95 mm dia x 120 mm deep, 600 µm wire mesh. EL81-4823 Wire Basket. BS 812 Type 3, EN 1367-2, 95 mm dia x 120 mm deep, 1.18mm wire mesh. EL81-4825 Wire Basket. BS 812 Type 4, EN 1367-2, 120 mm dia x 120 mm deep, 3.35 mm wire mesh. EL81-4160 EL81-4230 EL81-4700 Sample Tray. Heavy-duty, galvanised steel, nesting 910 x 910 x 76 mm. Sample Tray. Heavy-duty, galvanised steel, nesting 1200 x 1160 x 50 mm. Sample Tray. Stainless steel spinning, without seams 305 mm diameter x 50 mm. 8 kg 12.50 kg 1.0 kg Beakers and Bowls EL81-4779 EL81-5020 Beaker. 500 ml capacity, aluminium. Bowl. 2.5 (approx) litre capacity, stainless steel. EL81-5040 Bowl. 5 (approx) litre capacity, stainless steel. EL81-5060 Bowl. 11 (approx) litre capacity, stainless steel. 142 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

82 Laboratory Equipment - Glass and Plastic Ware Glass and Plastic Ware Beakers and Covers EL82-0120 EL82-0140 EL82-0200 EL82-0220 EL82-0260 Beaker, borosilicate glass, squat form. Beaker, borosilicate glass, squat form. Beaker, borosilicate glass, squat form. Beaker, borosilicate glass, squat form. Beaker Cover, watch glass. Borosilicate glass, 100 mm dia. Capacity 100 ml 250 ml 600 ml 1000 ml Pipettes and Burettes Capacity EL82-1240 Graduated Pipette, Type 1, Class B, BS 700 0.10 ml sub-divisions. 10 ml (nominal) Measuring Cylinders, BS EL82-0380 EL82-0420 EL82-0460 EL82-0500 EL82-1840 EL82-1860 Measuring Cylinder, soda glass, spouted, BS EN 4788. Measuring Cylinder, soda glass, spouted, BS EN 4788. Measuring Cylinder, soda glass, spouted, BS EN 4788. Measuring Cylinder, soda glass, spouted, BS EN 4788. Measuring Cylinder, plastic with spout, graduated to BS 5404. Measuring Cylinder, plastic with spout, graduated to BS 5404. Capacity 100 ml 250 ml 500 ml 1000 ml 100 ml 250 ml EL82-1260 Graduated Pipette, Type 1, Class B, BS 700 0.25 ml subdivisions. 25 ml (nominal) EL82-1300 Bulb Pipette, BS 1583. 50 ml EL82-1440 Burette, soda glass with singlebore stopcock, BS EN ISO 385 Class B, 0.10 sub-divisions. 50 ml (nominal) Evaporating Dishes EL82-1970 EL82-2000 Evaporating Dish, shallow form with spout, porcelain 100 x 40 mm nominal diameter x height. Evaporating Dish, shallow form with spout, porcelain 150 x 45 mm nominal diameter x height. EL82-1880 EL82-1900 Measuring Cylinder, plastic with spout, graduated to BS 5404. Measuring Cylinder, plastic with spout, graduated to BS 5404. 500 ml 1000 ml EL82-2010 Evaporating Dish, shallow form with spout, porcelain 200 x 55 mm nominal diameter x height. 143 For 24/7 online ordering, payment & order tracking go to www.ele.com

82 Laboratory Equipment - Glass and Plastic Ware Funnels and Flasks EL82-1000 EL82-1020 EL82-1040 EL82-1060 EL82-1120 EL82-1140 EL82-2350 EL82-2200 EL82-2660 Desiccators Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B. Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B. Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B. Volumetric Flask, soda glass, stoppered to BS ISO 1042 Class B. Conical Flask (Erlenmeyer), borosilicate glass, wide mouth graduated, 100 ml sub-divisions (nominal). Conical Flask (Erlenmeyer), borosilicate glass, wide mouth graduated, 50 ml sub-divisions (nominal). Filter Flask, conical type with integral side arm. Buchner Funnel, size no. 5 accepts 110 mm diameter filter paper. Funnel, polythene, 200 mm diameter. EL82-2100 EL82-2110 EL82-2170 EL82-2180 Capacity 100 ml 250 ml 500 ml 1000 ml 500 ml 250 ml 1000 ml Desiccator, non-vacuum type, 200 mm internal diameter borosilicate glass. Supplied with perforated zinc disc. Desiccator Cabinet, non-vacuum, internal dimensions 300 x 300 mm acrylic plastic. Supplied with 1 shelf and 2 desiccant trays. Desiccator, vacuum type, 280 mm internal diameter, soda glass. Supplied with perforated zinc disc and stopcock. Safety Cage for EL82-2170. Bottles and Crucibles EL82-1540 Weighing Bottle, glass with stopper, 25 x 50 mm diameter x height. EL82-2500 Wash Bottle, polythene, 500 ml capacity. EL82-3060 Reagent Bottle, 1000 ml, amber glass plastic stopper. EL82-3145 Polythene Bottle, wide neck, screw cap, 1 litre. EL82-3149 Polythene Bottle, wide neck, screw cap, 5 litres. EL82-3320 Porcelain Crucible, 30 ml capacity complete with lid. Syringe and Stirring Rod EL82-2820 Syringe with rubber bulb. 500 g. EL82-4005 Volumetric Flasks Glass Stirring Rod, 7 mm diameter x 200 mm long. Pack of 10. 144 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

82 Laboratory Equipment - Temperature Measurement Hydrometers, Aggregate Testing BS 812, EN 1367-2, ASTM C88, AASHTO T104 EL82-3505 Hydrometer, type L50, ASTM C 88 graduated 1150 to 1200 relative density (used with sodium sulphate method). EL82-3510 Hydrometer, type L50, ASTM C 88 graduated 1250 to 1300 relative density (used with magnesium sulphate method). Portable Dial-type Thermometers Hydrometers EL82-5243 EL82-5244 EL82-5245 EL82-5246 EL82-5247 EL82-5248 Portable Thermometer, 64 mm diameter dial with a 650 mm long stem. Portable Thermometer, 25 mm diameter dial with a 90 mm long stem and protective sheath. Portable Thermometer, 25 mm diameter dial with a 100 mm long stem and protective sheath. Portable Thermometer, 50 mm diameter dial with a 200 mm long stem and protective sheath. Portable Thermometer, 50 mm diameter dial with a 180 mm long stem. Portable Thermometer, complies with BS 598 for temperature measurement of bituminous mixes prior to and during laying. Graduated in 2ºC divisions with a stem length of 300 mm and accurate to ± 2ºC. Non Hazardous Glass Thermometers Range C +50 to +250 30 to +60 0 to +250 20 to +60 100 ml 0 to +250 Range C Divisions Immersion EL82-5005 10 to +260 1.0ºC 76 mm EL82-5270 1 to +51 0.1ºC Total EL82-5272 1 to +101 0.2ºC Total EL82-5274 10 to +210 1ºC Total General-purpose Thermometers Portable Dial Thermometers Range ºC EL82-5311 Surface Thermometer, 0 to +160 flat surface type with approximately 64 mm diameter dial. Accuracy ± 3ºC. EL82-5310 Maximum and Minimum Thermometer. Non hazardous. 40 to +50 145 For 24/7 online ordering, payment & order tracking go to www.ele.com

82 Laboratory Hardware - Temperature Measurement Digital Thermometers Hand-held Digital Thermometers u u Splash-proof membrane circuitry Complete with probes and case This Hand-held Digital Thermometer is ideal for laboratory or site use. The unit provides for Celsius and/ or Fahrenheit display to a clear LCD, powered by a standard 9 V PP3 battery or equivalent. The thermometer is supplied complete with surface probe, penetration probe, battery and case. EL82-5442 Digital Thermometer Specification Range Resolution and accuracy Cold junction (automatic) 0 to 45ºC 500 g 75 to +1200ºC or 30 to +199.9ºC or 75 to +1999ºF 1ºC ( 75 to +1200ºC), 0.2% ± 0.1ºC, 0.1ºC ( 30 to +199.9ºC) 0.2% ± 1.0ºC, 1ºF ( 75 to +1999ºF), 0.2% ± 2.0ºF EL82-5442 Digital Thermometer. 75 C to +1200ºC. Accessory EL82-5440/10 Thermocouple Wire. 3 metre length, suitable for EL82-5440 Digital Thermometer. The thermocouple is NiCr/NiAi PTFE covered with a naked exposed junction. Supplied with a coupling unit the maximum reading is 250ºC with a tip diameter of 0.5 mm. (Pack of 5). Digital Pocket Thermometer EL82-5440/10 Thermocouple Wire Specification Dimensions (l x w x h) Range Resolution Accuracy 150 x 45 x 19 mm 49.9 to 199.9ºC 0.1ºC ±0.4ºC 105 g EL82-5420 Digital Pocket Thermometer. The stainless steel probe carries a highly accurate platinum sensor and when not in use folds back into the side of the instrument. With a clear 8 mm high LCD display this instrument is powered by a standard 12 V MN21 battery or equivalent. EL82-5420 Digital Pocket Thermometer 146 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

82 Laboratory Equipment - General Chemicals, Test and Reference Materials EL82-7031 Paraffin Wax. No hazard (congealing point approx 49ºC). 5 kg block. EL82-7091 Silica Gel. Coarse. No hazard. 500 g. EL82-7171 Sodium Sulphate. Anhydrous. No hazard. 3 kg. EL82-7341 Mould Oil. No hazard. 25 litre drum. EL82-7401 Standard Sand. 600/300 µm, Fraction C. No hazard. 25 kg. EL82-7441 Standard Sand. ASTM. No hazard. 25 kg. EL82-7451 Standard Sand. 850/600 µm. No hazard. 25 kg. Vacuum Pumps EL82-7700 Filter Pump Specification Construction Ultimate vacuum Water supply pressure required Moulded plastic body 12 to 15 torr (12 to 15 mm Hg) 14 kpa 200 g EL82-7720/01 Vacuum Pump Specification Type Pump Ultimate vacuum Displacement Electrical supply Single stage Oil filled rotary 4 x 10 2 mbar 42 litres per minute (2.4 m 3 /hour) 220 240 V AC, 50-60 Hz, 1 ph 12.7 kg Accessories Rubber Tubing see EL81-0375 EL82-7720/12 Water Trap Filter Papers Box of 100 Spare EL82-7720/10 Vacuum Oil. 4 litre. Fast EL82-7861 Medium EL82-7901 Slow EL82-7931 Filter Paper no. 55 x 400 mm diameter. Filter Paper no. 74 x 150 mm diameter. Filter Paper no. 95 x 110 mm diameter. Filter Papers EL82-7720/01 Vacuum Pump and EL82-7700 Filter Pump 147 For 24/7 online ordering, payment & order tracking go to www.ele.com

82 Laboratory Equipment - General Water Baths Specification EL82-8500/01 EL82-8600/01 Capacity 12 litres 18 litres Working area 210 x 300 mm 390 x 300 mm Tray Yes Yes Max water depth 130 mm 130 mm Controller Digital Digital Temperature Range ºC Stability ºC Electrical supply 0 to 99.9 ± 0.1 220 240 V AC, 50-60 Hz, 1 ph Rated power kw 1.5 1.5 8.1 kg 9.2 kg Distilled Water Still 0 to 99.9 ± 0.1 220 240 V AC, 50-60 Hz, 1 ph Specification Dimensions (l x w x h) Boiling chamber Condenser Output Electrical supply Rated power 590 x 530 x 940 mm Glass Borosilicate glass 3.5 litres/hr when permanently connected to water supply 220 240 V AC, 50-60 Hz, 1 ph 2.75 kw 12 kg EL82-8020/01 Distilled Water Still EL82-8020/01 Distilled Water Still Masonry Saw Specification Dimensions (l x w x h) Cutting depth with 300 mm diameter blade Electrical supply Rated power 1195 x 705 x 1350 mm 110 mm 220-240 V AC, 50 Hz, 1 ph, separate fused power supply and switching required 2200 W 120 kg EL82-8950/01 Masonry Saw Accessories EL82-8950/12 Diamond Blade. Wet cutting. Blade diameter 350mm, depth of cut 110 mm. EL82-8950/01 Masonry Saw 148 Tel: +44 (0) 1525 249 200 u Fax: +44 (0) 1525 249 249 u Email: ele@eleint.co.uk

83 Laboratory Equipment - General Air Compressors number EL83-1730/01 EL83-1735/01 Dimensions 483 x 457 x 864 1321 x 457 x 914 (l x w x h) (mm) Free air delivery 2.0 cfm 6.0 cfm Receiver capacity 50 litres 116 litres Maximum pressure 1000 kpa 1380 kpa Continuous 700 kpa 1000 kpa working pressure Electrical supply 220 240 V AC 1 ph 50 Hz 220 240 V AC 1 ph 50 Hz Water Trap No Yes 57 kg 149 kg Dial Gauges number Dia. mm Travel mm Grad. mm Scale Anvil Back type EL83-5416 57 25 0.01 RH Ball C EL83-5451 57 10 0.002 RH None B EL83-5456 57 10 0.01 RH Ball A Key: RH scale clockwise rotation LH scale anticlockwise rotation Back type see diagram Back type A B C EL83-17 series Air Compressor Furnaces Muffle furnaces are widely used for determining various properties of construction materials. Note: EL83-4140/01 complies with the following Standards: EN13454-2 BS 1016:4;; ISO 344, 1171; ASTM D2361,D2795, D3714. number Dimensions (l x w x h) External Work chamber Internal volume EL83-4140/01 740 x 430 x 650 mm 455 x 170 x 90 mm 6.9 litres Maximum temperature 1100ºC Electrical supply 220 240 V AC, 50-60 Hz, 1 ph Power supply 3900 W 63 kg EL83-4140/01 Muffle Furnace 149 For 24/7 online ordering, payment & order tracking go to www.ele.com