DigiTemp. Digital Thermometer
|
|
- Walter Gibson
- 6 years ago
- Views:
Transcription
1 DigiTemp R Digital Thermometer (Standard Version)
2 Page 1 The DigiTemp battery-powered digital thermometer is designed to suit a wide range of industrial applications which demand accurate measurement of temperature. The DigiTemp is housed in a robust stainless steel case, sealed to IP67 rating, which is suitable for hostile industrial environments without additional protection. Powered by two standard AA alkaline cells, the DigiTemp gives two years of continuous maintenance-free operation. Installation Ambient conditions : Best measurement accuracy will be achieved if the DigiTemp is operated close to the calibration temperature of 20ºC (68ºF). Avoid siting the DigiTemp where there is extreme vibration. Location and mounting : Thermometers fitted with a rigid stem of 6.35 or 12.7mm diameter are intended to be supported by means of a fixed or sliding gland. Do not overtighten the gland nut. Instruments which are fitted with flexible or semi-rigid minerally-insulated stems are generally supplied with a three-hole mounting flange which allows the thermometer to be either surface or panel-mounted. The fixing centres of the flanges are as indicated in Figure 1 below. Figure 1 - Mounting details for panel (front flange) and surface (back flange) versions. Immersion length : For accurate temperature measurement it is essential that the sensitive portion of the stem (generally the section 19mm from the tip of the stem) is fully immersed in the medium to be measured. It is recommended that the immersion length should be at least three times the length of the sensitive portion of the stem. Process conditions and thermowells : Ensure that the stem material of the DigiTemp (generally stainless steel, 316 grade) is compatible with any chemically aggressive medium that it may come into contact with. If the process medium is under pressure (3.5 bar or greater), for safety reasons the stem of the DigiTemp should be protected by a thermowell ('pocket') designed to suit the process conditions. A wide range of thermowells are available from British Rototherm, please contact the Sales Office for advice. Display units The display reading may be given in degrees Celsius or Fahrenheit according to the position of the internal jumper which is shown in Figure 3. Dials marked with either C or F are available, part numbers DT0039-C ( C) and DT0040-C ( F). Over and under-range indications Should the measured temperature lie below or above the range of the DigiTemp the display will read either Undr or OvEr. The temperature range of the instrument is shown on the label attached to the top of the case.
3 Page 2 Battery replacement The instrument is powered by two alkaline manganese 1.5 volt cells, type LR6 (AA). When these are due for replacement the display will alternate between the temperature reading and message batt. This warning will be given when the battery voltage falls to 2.0 volts (1.0 volt per cell), at which point the battery has approximately two months' life remaining. An internal voltage regulator circuit maintains measurement accuracy until the battery voltage falls to approximately 1.5 volts. Always replace the cells in pairs, do not mix old and new cells. To replace the battery unscrew the front bezel ring and remove the window and sealing gasket. Remove the two nylon-headed screws and lift off the dial. Remove the old cells and fit two "AA" size 1.5V alkaline manganese cells into the battery holder. The correct polarity of the cells is shown in Figure 2 below and is also marked on the battery holder. (The instrument will not be damaged if the cells are fitted incorrectly.) Refit the dial, place the sealing gasket on the front face of the case then centre the window on the gasket. Refit the bezel ring tightly with firm hand pressure. Calibration Figure 2 - Correct battery polarity Each DigiTemp thermometer is fully calibrated during manufacture and certificates of calibration may be requested at time of ordering. It is recommended that the calibration of the thermometer should be checked against a known temperature standard every 12 months or at intervals specified by relevant quality assurance procedures. British Rototherm offers a rapid in-house recalibration service for its temperature measurement products, traceable to national standards. Please contact the Sales Office for details. Procedure Calibration of the DigiTemp thermometer is achieved by adjusting two multi-turn trimmer potentiometers which are located behind the dial. One trimmer (P1) provides adjustment of the zero reading, a second (P2) controls the span. An ice bath reference should be used when setting the zero trimmer to give a reading of 0 C (32 F) and the span adjustments may be made by comparing the readings of the DigiTemp with those of an accurate reference standard thermometer at a higher temperature. (For best accuracy the higher temperature should be close to the upper measurement limit.) If a standard thermometer and high temperature bath are not available the DigiTemp may be checked by immersing the stem in boiling water (100 C, 212 F). 1. Fully immerse the stem in a bath containing a mixture of clean crushed ice and water. Allow time for the stem to settle at the temperature of the ice bath, stir the bath occasionally. Adjust the zero trimmer potentiometer if necessary until a reading of 0.0 C is obtained (32.0 F for the F version). 2. Transfer the stem to a high temperature calibration bath (e.g. 100 C) containing a reference thermometer if available. The tip of the stem should be placed close to that of the reference. Allow sufficient time for the stem temperature to reach that of the bath, then adjust the span trimmer potentiometer (P2) until the display reading matches the reference. 3. Return the DigiTemp stem to the ice bath and check that the 0 C reading has not altered. It may be necessary to repeat the above zero and span adjustments several times until both readings are satisfactory.
4 Page 3 Calibration (continued) 4. Refit the dial, place the sealing gasket on the front face of the case then centre the window on the gasket. Refit the bezel ring tightly with firm hand pressure. CAUTION! Observe correct safety procedures when working with high temperature calibration baths. Figure 3 - Internal view of case showing calibration trimmers and C / F selection jumpers Minimum and maximum reading option The Digitemp may be fitted with an option which stores the maximum and minimum measured temperatures. These temperatures may be displayed or cleared by means of magnetically-operated switches without opening the sealed case. To display the minimum and maximum temperatures : Place a bar magnet on the top right-hand side of the case within the box marked Min - Max on the instrument label. The DigiTemp display will then alternate between the maximum and minimum values as long as the magnet is held in place. The maximum temperature is shown after the display message Hi and the minimum value follows Lo. To reset (clear) the minimum and maximum values : Place a bar magnet on the top left-hand side of the case within the box marked Min-Max Clear on the instrument label. After approximately 5 seconds the minimum and maximum values will be cleared, confirmed by the display message HiLo CLrd. Note that the minimum and maximum readings will also be cleared if the battery is removed. Warranty The Rototherm DigiTemp thermometer is guaranteed to be free of manufacturing defects for a period of one year from the date of purchase. To obtain service under this warranty the instrument should be returned in its original packaging either to British Rototherm or its distributors. This warranty excludes the battery, damage due to battery leakage or misuse. Any details given in this instruction sheet are subject to change without notice.
5 Page 4 Specifications Sensor: Platinum RTD or thermocouple (Type K class 1 as standard, others available to order) Measurement ranges: T/C: -100 to C (-148 to F) 1 resolution RTD: -50 to +200 C (-58 to +392 F) 0.1 resolution (Specific temperature range is dependent on sensor & stem construction) Accuracy: T/C: ±1 C ± 1 digit RTD: ±0.2 C ± 1 digit Stability: T/C: Zero : ±0.05 C per C ambient change Span : ±0.01% of span per C ambient change RTD: Zero : ±0.005 C per C ambient change Span : ±0.003% of span per C ambient change (Figures for T/C variant include CJ compensation) Sensor linearisation: Cold junction compensation : Display: Update interval: Automatic, via software. Automatic (T/C only). 4 digit LCD with 12.7mm (1/2") high characters. C or F selectable by internal jumper 0.6 seconds approximately Temperature Limits: Storage: -20 to 85 C (-4 to 185 F) Ambient Operating: -20 to +60 C (-4 to 140 F) Power Source: Battery Life: Low battery warning: 3V battery, 2 x 1.5V "AA" alkaline cells. 2 years. Display will alternate between temperature reading and BATT Electromagnetic BS EN : 1992 BS EN : 1995 compatibility (EMC): Case: Ingress Protection: 100mm dia. 304 stainless steel case, 316 stainless steel stem. IP67 Details given in this instruction sheet are subject to change without notice. JAG 10/2003 ISO 9001 Certificate No. FM11958 British Rototherm Co. Ltd., Kenfig Industrial Estate, Margam, Port Talbot, West Glamorgan, SA13 2PW, United Kingdom. Telephone: +44 (0) 1656) Facsimile: +44 (0) / rototherm@rototherm.co.uk Web Site:
Mineral Insulated Resistance Thermometers (RTD)
Mineral Insulated Resistance Thermometers (RTD) Electronic Temperature Measurement Data sheet : MIRTD/2012 Contents Page RTD Element Type 2 Conductors & Number of Wires 2 Probe Diameter 3 Length Types
More informationThermocouple Thermometer Models
Thermocouple Thermometer Models 91100-00 (Type J) 91100-10 (Type K) 91100-20 (Type T) Cole-Parmer Instrument Company 625 East Bunker Court Vernon Hills, Illinois U.S.A. 60061-1844 (847) 549-7600 (847)
More informationThermistor Thermometer MODEL NO
Digi -Sense Thermistor Thermometer MODEL NO. 60010-70 Digi -Sense CERTIFICATE OF CONFORMANCE This thermometer was calibrated using equipment traceable to the National Institute of Standards and Technology
More informationCLEARSCAN MECHANICAL RECORDER
Data Sheet CLEARSCAN MECHANICAL RECRDER Supplied by.com Call us on +44 (0)118 916 9420 Email info@247able.com Process Recorders Clearscan Mechanical Recorder Flow, Pressure & Temperature Model CLEARSCAN
More informationBarnant Company (Type J) (Type K) (Type T)
Barnant Company Thermocouple Thermometer Models 600-1000 (Type J) 600-1010 (Type K) 600-1020 (Type T) Barnant Company 28W092 Commercial Avenue Barrington, Illinois U.S.A. 60010-2392 (847) 381-7050 (847)
More informationFilled System Thermometers
illed System Thermometers Model N & NR Mechanical Thermometers ata sheet : ST/2012 The Rototherm range of filled system thermometers offer tough yet accurate instruments with rigid stems for direct mounting
More informationResistance thermometer with digital display Model TR75, battery operation
Electrical temperature measurement Resistance thermometer with digital display Model TR75, battery operation WIKA data sheet TE 60.75 Applications DiwiTherm Machine building, plant and vessel construction
More informationResistance thermometer with digital indicator Model TR75, battery operation
Electrical temperature measurement Resistance thermometer with digital indicator Model TR75, battery operation WIKA data sheet TE 60.75 Applications DiwiTherm Machine building, plant and vessel construction
More informationSingle-Input Thermocouple. Thermometers Type J, K, T
Instruction Manual Single-Input Thermocouple Single-Input Thermocouple Thermometers Type J, K, T Thermometers Type J, K, T 68X001351 Rev0 0717 1065DGMAN_91428-00,-01,-02 TABLE OF CONTENTS 1. INTRODUCTION...
More informationRS MODEL 2030
RS375-2798 MODEL 2030 THERMOCOUPLE THERMOMETER / SIMULATOR FEATURES A high accuracy instrument that will give you confidence in your other instruments. The simulator was designed to simulate a known temperature
More informationOPERATING MANUAL TH-8
OPERATING MANUAL THERMALERT MONITORING THERMOMETER TH-8 Section CONTENTS 1.0 INTRODUCTION 2.0 INITIAL INSTALLATION 3.0 PRECAUTIONS 4.0 DIRECTIONS FOR USE 5.0 REPLACING BATTERIES 6.0 CHECKING CALIBRATION
More informationInstruction Manual. Single-Input Thermistor Thermometer (Model )
Instruction Manual Single-Input Thermistor Thermometer (Model 91428-05) 68X001349 Rev0 0717 1065DGMAN_91428-05 TABLE OF CONTENTS 1. QUICK-START GUIDE... 1 2. INTRODUCTION... 2 3. SAFETY PRECAUTIONS...
More informationIllustrations. Contents. Burns Connection Head. Models #22, #23 & #24 with Battery Powered LCD Indicator Instruction Manual
Burns Connection Head Models #, # & # Burns Connection Head Models #, # & # with Battery Powered LCD Indicator Instruction Manual Contents Introduction General Receiving Specifications General RTD At 0
More informationBudget Series Digital Thermometer. Instruction manual Models 874F/C, 875F/C, 878 and 879
TEGAM is a manufacturer of electronic test and measurement equipment for metrology, calibration, and production test. We also provide repair, calibration, and other support services for a wide variety
More informationEGT MONITOR AND PROBE KIT BG FUEL SYSTEMS McDonald Road Dahlonega, GA (706) A Edition 03
BG FUEL SYSTEMS EGT MONITOR AND PROBE KIT BG FUEL SYSTEMS 1450 McDonald Road Dahlonega, GA 30533 (706) 864-8544 A-1299-0765 Edition 03 INTRODUCTION This versatile hand-held instrument provides highly accurate
More informationClearscan C105 & M105 Pressure & Temperature Recorders
Clearscan C05 & M05 Pressure & Temperature Recorders Choice of Cases This range of temperature and pressure recorders can be built into either of two types of tough steel case. oth have a lockable fronthinged
More informationNuclear Qualified Temperature Switches
The SOR temperature switch utilizes a SAMA Class II thermal system. NOTE: This type of system requires that the entire length of the sensing bulb be exposed to the temperature being measured. Nuclear Qualified
More informationDigital Thermometers Instruction Manual MODELS 868 and 869
Digital Thermometers Instruction Manual MODELS 868 and 869 Instruction Manual PN# 869-901-01CD Publication Date: May 2017 REV. G NOTE: This User s Manual was as current as possible when this product was
More informationOPERATING USER MANUAL for TEMPERATURE RECORDERS
Serial No. OPERATING USER MANUAL for TEMPERATURE RECORDERS MNW-003 Rev. E 03/21/16 Palmer Instruments Inc. 234 Old Weaverville Road Asheville, NC 28804 Toll Free: 800-421-2853 Phone: 828-658-3131 Fax:
More informationDIGI-TEL THERMOMETERS
TEL-TRU MANUFACTURING COMPANY DIGI-TEL THERMOMETERS www.teltru.com ELECTRONIC DIGITAL THERMOMETERS Tel-Tru s DIGI-TEL Thermometers combine the easy, quick visual reference feature of a local indicator
More informationTwin-Temp. Bimetal Thermometers with Thermocouple/RTD Output. For pricing info, call WIKA-USA or visit
Twin-Temp Bimetal Thermometers with Thermocouple/RTD Output For pricing info, call 1-888-WIKA-USA or visit www.wika.com 393 Bimetal Thermometers with Thermocouple/RTD Output Type TT.30, TT.32 TT.50, TT.52
More informationPIECAL 322 Automated Thermocouple Calibrator Operating Instructions. Product Description
PIECAL 322 Automated Thermocouple Calibrator Operating Instructions Product Description Easy to use With the PIECAL 322-1 you can check & calibrate all your thermocouple instruments and measure thermocouple
More informationModel 422 Automated Thermocouple Calibrator Operating Instructions. Product Description
Model 422 Automated Thermocouple Calibrator Operating Instructions Product Description Easy to use With the PIECAL 422 you can check & calibrate all your thermocouple instruments and measure thermocouple
More informationTemp-14 Single Input Thermistor Thermometer
Instruction Manual Temp-14 Single Input Thermistor Thermometer Part of Thermo Fisher Scientific 68X481902 Rev 0 10/08 TABLE OF CONTENTS 1. Quick Start Guide... 1 2. Introduction... 2 3. Safety Precautions...
More informationModel 322 Automated Thermocouple Calibrator Operating Instructions. Product Description. Practical Instrument Electronics
Model 322 Automated Thermocouple Calibrator Operating Instructions Product Description Easy to use With the PIECAL 322 you can check & calibrate all your thermocouple instruments and measure thermocouple
More information(Type J) (Type K) (Type T)
Thermocouple Thermometer Models 91100-00 (Type J) 91100-10 (Type K) 91100-20 (Type T) Cole-Parmer Instrument Co. 625 East Bunker Court Vernon Hills, Illinois U.S.A. 60061-1844 (847) 549-7600 (847) 247-2929
More informationZEAL The Gauge of Quality PRECISION BIMETAL DIAL THERMOMETERS
ZEAL The Gauge of Quality PRECISION BIMETAL DIAL THERMOMETERS TRADE CATALOGUE 2005 ZEAL The genuine article since 1888 Distributer : ANSARI AGENCIES SDN.BHD. 18-A, 1st Floor, Jalan MJ/ 7, Medan Maju Jaya,
More informationPHscan30S Pocket ph Meter Instruction Manual
PHscan30S Pocket ph Meter Instruction Manual BANTE INSTRUMENTS CO., LTD PHscan30S Pocket ph Meter 1 Thank you for selecting the PHscan30S pocket ph meter. This manual provides a step-by-step guide to help
More informationISOCAL - 6 Range Europa Venus Calisto
-45 to 250 C ACROSS RAngE ISOCAL - 6 Range Europa Venus Calisto g 35 x 160mm Calibration Volume g The Most Flexible Temperature Calibrator g S model includes Universal Input Temperature Indicator g Windows
More informationTel-Tru Manufacturing Company World-Class Thermometers
Tel-Tru Manufacturing Company World-Class Thermometers We manufacture thermometers - but we sell service, reliability, product quality and performance. QUALITY AND PERFORMANCE FEATURES: CASE AND BEZEL
More informationTel-Tru Manufacturing Company World-Class Thermometers
Tel-Tru Manufacturing Company World-Class Thermometers We manufacture thermometers - but we sell service, reliability, product quality and performance. QUALITY AND PERFORMANCE FEATURES: CASE AND BEZEL
More informationThis manual covers the following model:
www.skcltd.com chek-mate Air Flowmeter Operating Instructions This manual covers the following model: 375-07550 Purchase Details and Service Record Thank you for choosing an SKC product. Your purchase
More informationTEL-TRU MANUFACTURING COMPANY DIGITAL THERMOMETERS
TEL-TRU MANUFACTURING COMPANY DIGITAL THERMOMETERS www.sandelius.com ELECTRONIC DIGITAL THERMOMETERS Tel-Tru s DIGI-TEL Thermometers combine the easy, quick visual reference feature of a local indicator
More informationfax
INDUSTRIAL THERMOMETERS Industrial thermometers Selecting the correct thermometer for an application is by definition very important, to achieve the maximum accuracy and repeatability of the temperature
More informationTBM. Bi-Metal Thermometer
Description & Features: A general purpose, versatile 1 (25mm) to 6 (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationPressure measurements can easily be taken any time, anywhere. POWER LIGHT
Compact Manometer Pressure measurements can easily be taken any time, anywhere. RoHS Compact and lightweight Portable type with a lightweight of only about 00 g (unit 50 g, battery 50 g) can also be held
More informationMODEL RTO FILLED SYSTEM TEMPERATURE RECORDERS, RPO PRESSURE RECORDERS & RECORDERS CONTROLLERS (ELECTRICAL CONTROL) Instruction Manual
MODEL RTO FILLED SYSTEM TEMPERATURE RECORDERS, RPO PRESSURE RECORDERS & RECORDERS CONTROLLERS (ELECTRICAL CONTROL) Instruction Manual Introduction 1 Specification 1 Description of Operation 1 Receipt of
More informationTEL-TRU Manufacturing Co. DIGI-TEL THERMOMETERS. Replacement for Liquid-in-Glass Thermometers. m
TEL-TRU Manufacturing Co. DIGI-TEL THERMOMETERS Replacement for Liquid-in-Glass Thermometers www.teltru.co m Tel-Tru Manufacturing Company 408 St. Paul St., Rochester, New York 14605 USA Phone: 585.232.1440
More informationWalkLAB Digital Dissolved Oxygen meter HD9030
7,0,7,0,1,6,1,6,5,2,5,2,3,4,3,4 WalkLAB Digital Dissolved Oxygen meter HD9030 Operation Manual 0 INTRODUCTION Your purchase of this WalkLAB Digital Dissolved Oxygen meter marks a step forward for you into
More informationECscan20 Pocket Conductivity Tester Instruction Manual
ECscan20 Pocket Conductivity Tester Instruction Manual BANTE INSTRUMENTS CO., LTD ECscan20 Pocket Conductivity Tester 1 Thank you for selecting the ECscan20 pocket conductivity tester. This manual provides
More informationDST400 Digi-Stem Thermometer User Manual
DST400 Digi-Stem Thermometer User Manual 01/08/13 WD1095 Rev C (02/19/15) Wahl Instruments, Inc. 234 Old Weaverville Road Asheville, NC 28804 Toll Free 800-421-2853 Phone 828-658-3131 Fax 828-658-0728
More informationPIECAL 520B & 521B Thermocouple Source Operating Instructions
PIECAL 520B & 521B Thermocouple Source Operating Instructions (Shown without optional boot) Product Description Easy to use With the PIECAL 520B/521B you can check & calibrate all your thermocouple instruments.
More information3000 SERIES DRY-BLOCK HEAT SOURCE
3000 SERIES DRY-BLOCK HEAT SOURCE USER MANUAL Please read this manual before switching the unit on IMPORTANT safety information inside TABLE OF CONTENTS 1 INTRODUCTION 1 2 SAFETY 2 3 OPERATION 3 3.1 Parts
More informationINSTRUCTION MANUAL DT173 DT175 DIGITAL THERMOMETERS ALWAYS READ THESE INSTRUCTIONS BEFORE PROCEEDING
DIGITAL THERMOMETERS INSTRUCTION MANUAL ALWAYS READ THESE INSTRUCTIONS BEFORE PROCEEDING Thank you for buying one of our products. For safety and a full understanding of its benefits please read this manual
More information51 & 52 Series II. Users Manual. Thermometer. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.
51 & 52 Series II Thermometer Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Users Manual English September 1999 Rev.2, 11/10 1999-2010 Fluke Corporation,
More informationRon 2501 Shackle Type Wireless Dynamometer
Ron Shackle Type Wireless Dynamometer Short delivery time: Usually - business days. High quality Aerospace Steel for increased strength and safety. Exceptionally small dimensions enable minimum headroom
More informationService Procedure D01A
Service Procedure D01A 0Title: RETURN AIR, DISCHARGE AIR, COIL, AND AMBIENT TEMPERATURE SENSOR TEST Where Used: All units equipped with μp-vi Microprocessors and Revision 40xx Software. Purpose: This procedure
More informationINTERNATIONAL METAL ENGINEERING
INDICATING TEMPERATURE TRANSMITTER WITH HART 8080HT UNIVERSAL SETTINGS WITH HART PROTOCOL FOR VARIOUS INPUT SIGNALS 2 WIRE TECHNOLOGY, 4 TO 20mA ANALOG OUTPUT HIGH ACCURACY IN TOTAL AMBIENT TEMPERATURE
More informationDS DC1100 Energy Controller SELF CONFIGURING OPTIMISER/COMPENSATOR WITH BOILER SEQUENCE AND HWS CONTROL
DS 2.042 07/02 TM DC1100 Energy Controller SELF CONFIGURING OPTIMISER/COMPENSATOR WITH BOILER SEQUENCE AND HWS CONTROL DC1100 Specification No. 04-03-105 The DC1100 energy controller is a self configuring
More informationECscan30 Pocket Conductivity/TDS Tester Instruction Manual
ECscan30 Pocket Conductivity/TDS Tester Instruction Manual BANTE INSTRUMENTS CO., LTD ECscan30 Pocket Conductivity/TDS Tester 1 Thank you for selecting the ECscan30 pocket conductivity tester. This manual
More informationTEGAM HTRHSERIES. High Temperature, Relative Humidity/ Temperature Probe Transmitter
TEGAM HTRHSERIES High Temperature, Relative Humidity/ Temperature Probe Transmitter Publication Date: February 2009 Document Number: HTRH-900-01 Rev D NOTE: This User's Manual was as current as possible
More informationTX900. Microwave Leakage Detector. 99 Washington Street Melrose, MA Phone Toll Free
TX900 Microwave Leakage Detector 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Users Manual TX900 Microwave Leakage Detector
More informationSPG-DIGI. Operating Instruction. Please read carefully before use!
WALTER STAUFFENBERG GMBH & CO.KG Im Ehrenfeld 4 D-58791 Werdohl Postfach 1745 D-58777 Werdohl Germany Tel.: +49 (0) 2392 / 916-0 Fax: +49 (0) 2392 / 2505 E-Mail: sales@stauff.com Internet: www.stauff.com
More information7007 Loop Mate 2 Loop / Voltage / Current Simulator
7007 Loop Mate 2 Loop / Voltage / Current Simulator User Manual Time Electronics Ltd Unit 11 Botany Industrial Estate Tonbridge, Kent, TN9 1RH Tel: 01732 355993 Fax: 01732 770312 E-Mail: mail@timeelectronics.co.uk
More informationPeristaltic Cased Tube Pumps
Peristaltic Cased Tube Pumps Operating Manual Verderflex Economy Version 1.0v-01/2014 Print No. 01 45, 500, 1500, 3000, 8000 Verderflex Economy 1.0v-01.2014 Version 1.0v-01/2014 Print-No. 01 Verderflex
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 51 & 52 Series II Thermometer Users Manual English September 1999 Rev.1,
More informationAD592/592-10K Non-Room Sensors in BAPI-Box, BAPI-Box 2 or BAPI-Box 4 BA/592-x-(BB, BB2, BB4) Temperature Sensor Instructions & Operation
592 Theory of Operation The 592 sensor is a two terminal integrated-circuit temperature sensor. The 592 provides an output current directly proportional to absolute temperature. When the temperature of
More information6109A / 7109A. Portable Calibration Baths. Four times more calibration throughput with twice the accuracy of Micro-Baths and dry-block calibrators
6109A / 7109A Portable Calibration Baths Four times more calibration throughput with twice the accuracy of Micro-Baths and dry-block calibrators Portable calibration baths designed for clean process applications
More information1.Safe testing IMPORTANT:
Electricity is dangerous and can cause injury and death. Always treat it with the greatest of respect and care. If you are not quite sure how to proceed, then stop, take advice from a qualified person.
More informationPT100 Temperature Sensor User Manual
Man 239 PT100 Temperature Sensor User Manual Soil Instruments Limited has an ongoing policy of design review and reserves the right to amend these specifications without notice. Man239 - PT100 Temperature
More informationADTFM-im -issue INSTRUCTION MANUAL DIGITAL DIESEL METER ADTFM
-im -issue2-2017 INSTRUCTION MANUAL DIGITAL DIESEL METER INSTRUCTION MANUAL DIGITAL DIESEL METER INTRODUCTION Thank you for purchasing a Macnaught Electronic Turbine Meter The Macnaught digital turbine
More informationDigital Scale HL-WP Series
Digital Scale HL-WP Series HL-1000WP HL-300WP HL-3000WP WM+PD4000754 SAFETY PRECAUTIONS All safety messages are identified by the following, WARNING or CAUTION, of ANSI Z535.4 (American National Standard
More informationAdam Equipment QT SERIES. ADAM EQUIPMENT CO. LTD. pn Rev. D1, July 2002
Adam Equipment QT SERIES ADAM EQUIPMENT CO. LTD. pn. 3938 Rev. D1, July 2002 Adam Equipment Co. Ltd. 2002 Adam Equipment Co. Ltd. 2002 FEATURES Auto shut off Auto zero tracking Auto backlight (optional)
More informationoperating manual DL7 101 DIGITAL THERMOMETER
operating manual DL7 101 DIGITAL THERMOMETER Safety Information This instrument is a portable 3½ digit., compact-sized digital thermometer designed to use external K-type thermocouple as temperature sensor.
More informationBante220 Portable ph Meter Instruction Manual
Bante220 Portable ph Meter Instruction Manual BANTE INSTRUMENTS CO., LTD Bante220 Portable ph Meter 1 Introduction Thank you for selecting the Bante220 portable ph meter. This manual provides a step-by-step
More informationMid-West Instrument. Series 700 "Wet/Wet" Installation and Operating Instructions. Differential Pressure Transmitter
Mid-West Instrument IM_700/A Series 700 "Wet/Wet" Installation and Operating Instructions Differential Pressure Transmitter 6500 Dobry Dr. Sterling Heights, MI USA Toll Free: 800-648-5778 Ph 586-254-6500
More informationSonic Meter. Soni. Operating Manual. Rev. A
Sonic Meter Soni Operating Manual Rev. A Important: Do not attempt to operate this instrument without completely reading this manual and understanding the correct operating procedures. For online technical
More informationOperation Manual MODEL EC331. Microcomputer Based Conductivity /Resistivity & Temperature Pocket Meter EC331
Operation Manual MODEL EC331 Microcomputer Based Conductivity /Resistivity & Temperature Pocket Meter EC331 CONTENTS INITIAL INSPECTION AND ASSEMBLY...2 VISIONPLUS EC331 OVERVIEW...2 A. Meter Description...2
More informationTemperature multi-function calibrator Model CTM
Calibration Temperature multi-function calibrator Model CTM9100-150 WIKA data sheet CT 41.40 for further approvals see page 3 Applications Testing and calibration of all types of temperature measuring
More informationACTUATED THERMOMETERS
TEL-TRU Manufacturing Co. GAS ACTUATED THERMOMETERS www.teltru.co m REMOTE MOUNT GAS ACTUATED THERMOMETERS Tel-Tru s Gas Actuated Thermometers are of a molecular sieve design utilizing inert gas and activated
More informationInstruction Manual. Digital Panel Meter Model 3126 CAUTION. Code Type of T/C Measuring Range Display Range Accuracy
Instruction Manual Digital Panel Meter Model 3126 I-01861 1. Preface Thank you for purchasing our digital panel meter 3126 series. Before use, read this manual carefully and thoroughly, and keep this manual
More informationTemperature Measurement Solutions. Dial Indicating Electronic Industrial RTDs Thermowells Accessories
Temperature Measurement Solutions Dial Indicating Electronic Industrial RTDs Thermowells Accessories At NOSHOK, we pride ourselves on being innovators in the industry by continually offering the latest
More informationParker Hannifin GmbH & Co. KG Tube Fittings Division Europe Am Metallwerk 9, Bielefeld Phone Fax
Parker Hannifin GmbH & Co. KG Tube Fittings Division Europe Am Metallwerk 9, 33659 Bielefeld Phone ++49-521-4048-0 Fax ++49-521-4048-4280 Operating Instruction ServiceJunior SensoControl Please read carefully
More informationCable resistance thermometer Model TR40
Electrical temperature measurement Cable resistance thermometer Model TR40 WIKA data sheet TE 60.40 further approvals see page 11 Applications For direct installation into the process Machine building
More informationHand Held Pull Tester Instruction Manual Order No
Instruction Manual Order No. 63801-9700 Doc. No: TM-638019700 Release Date: 02-21-12 UNCONTROLLED COPY Page 1 of 13 Safety Warnings and Information Read and understand all of the instructions and safety
More informationTMD90A Dual Input Digital Thermometer
TMD90A Dual Input Digital Thermometer User Manual For detailed specifications and ordering info go to www.testequipmentdepot.com TMD90A Dual Input Thermometer Contents Safety Information 2 Symbols Used
More informationElectronic Monitoring Systems
JJ Electronic digital thermometer JJ Multi-channel temperature indicator JJ Temperature sensors JJ KombiTemp Electronic Monitoring Systems and Temperature Sensors DS_Electronic_monitoring_systems_and_temperature_sensors
More informationTBM. Bi-Metal Thermometer
Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationVoltage Output MELT PRESSURE TRANSMITTERS IN SERIES TECHNICAL SPECIFICATIONS
MELT PRESSURE TRANSMITTERS IN SERIES Voltage Output The IMPACT series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350 C). Medium pressure
More informationTime Electronics. Calibration, Test and Measurement. Portable Process and Pressure Calibration Instruments
Time Electronics Calibration, Test and Measurement Portable Process and Pressure Calibration Instruments Calibrators Simulators Sources Pumps Gauges www.timeelectronics.com Loop & Temperature Calibration
More informationMechatronic pressure measurement. Applications. Special features. Description
Mechatronic pressure measurement Diaphragm pressure gauge with electrical output signal Stainless steel, safety version High overload safety up to 400 bar Models PGT43HP.100 and PGT43HP.160 k Applications
More informationModel DS1000/DT20 System
Model DS1000/DT20 System Installation, Commissioning and Operation Manual Alpha Moisture Systems Alpha House 96 City Road Bradford BD8 8ES England Tel: +44 1274 733100 Fax: +44 1274 733200 Email: mail@amsytems.co.uk
More informationDirect immersion resistance thermometer
Direct immersion resistance thermometer PLAIN STEM D100-101-102-103-160-162 CONFIGURATIONS General use RTD Product series PT100WT D100 D101 D102 D103 D160 D162 2 Features assembly The sensor can be immersed
More informationDST600 Series Digi-Stem Thermometers
DST600 Series Digi-Stem Thermometers User Manual 04/12/12 WD1032 Rev L (05/24/16) For use with models: DST600 DST610, DST611, DST620 & DST621 DST640 DST650, DST651, DST660, DST661 Including I, R and P
More informationTBM. Bi-Metal Thermometer
Description & Features: A general purpose, versatile 1 (25mm) to 6 (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationAutoclave Thermocouples (Type 9) and Pt100 Sensors (Type 69)
Autoclave Thermocouples (Type 9) and Pt100 Sensors (Type 69) A range of thermocouple sensors specifically designed to withstand the harsh conditions within autoclaves. Autoclave Load and Drain thermocouples
More informationTA-2 RANGE OF THERMAL ANEMOMETERS
TM 9020023/G/797 SPECIALISTS IN AIR MOVEMENT TECHNOLOGY TA-2 RANGE OF THERMAL ANEMOMETERS Operating instructions 1 Introduction The T A-2 range of thermal anemometers comprises three models, scaled in
More informationTCS 1200 Portable Temperature Calibrator
TCS 1200 Portable Temperature Calibrator Instruction Manual MM 2 CONTENTS DESCRIPTION EMC Information Electrical Safety Environmental Ratings Insert Warning Health & Safety Instructions Guarantee Cautionary
More informationSeries 500. Liquid Level Transmitters. Instruction Manual
Series 500 Liquid Level Transmitters Instruction Manual Contents Section Content Page 1 Introduction 1.1 General Overview 3 1.2 Mounting Options 3 2 Installation Notes 2.1 Transmitters 4 2.1.1 Model 510
More informationCable thermocouple Model TC40
Electrical temperature measurement Cable thermocouple Model TC40 WIKA data sheet TE 65.40 for further approvals see page 11 Applications For direct installation into the process Machine building Motors
More informationODYR-25-1 & SLX-25-1 rev. A VACUUM/BOOST PRESSURE, TEMP, and EGT GAUGE
ODYR-25-1 & SLX-25-1 rev. A VACUUM/BOOST PRESSURE, TEMP, and EGT GAUGE SENSOR CONNECTION: The vac./boost sensor has 1/8 NPT on the end which can be treaded into the intake track, or into a pipe adapter
More informationOPERATING INSTRUCTIONS MESURES. Portable sludge level measuring instrument, battery operated MES. MUDLine TGS
MUDLine TGS Portable sludge level measuring instrument, battery operated OPERATING INSTRUCTIONS MESURES 22, Rue de la Voie des Bans - Z.I. de la Gare - 95100 ARGENTEUIL Tél : (+33) 01 30 25 83 20 - Web
More informationSpecifications - Installation and Operating Instructions Ø5 [127.00] 17/64 [6.91] 1-59/64 [48.89]
Bulletin P-DM-1200 Series DM-1200 DigiMag Digital Differential Pressure and Air Flow Gage Specifications - Installation and Operating Instructions PRESSURE CONNECTIONS 21/64 [8.59] LONG Ø5 [127.00] 4-31/64
More informationMiniature resistance thermometer For sanitary applications Model TR21-A, with flange connection
Electrical temperature measurement Miniature resistance thermometer For sanitary applications Model TR21-A, with flange connection WIKA data sheet TE 60.26 Applications Sanitary applications Food and beverage
More informationConductivity Measurement CLM 280
Technical Information TI 347C/07/en/07.03 51511754 Conductivity Measurement CLM 280 Battery-driven pocket meter for conductivity and resistance measurement Application CLM 280 is a compact pocket meter
More information1 (25mm): Acrylic Others: Glass standard, hermetically sealed
Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationTEL-TRU MANUFACTURING COMPANY. Dual Magnet Thermometer cross section, Weight 1½ oz.
TEL-TRU MANUFACTURING COMPANY SURFACE THERMOMETERS Tel-Tru Surface Thermometers are 2" dial compact thermometers that sense surface temperature. Exposed bimetal coil sensors provide a quick and accurate
More informationIndoor Air Quality Meter
Indoor Air Quality Indoor Air Quality Meter Alnor Model CF910 AIRFLOW TM Model IAQ910 Operation and Service Manual Copyright TSI Incorporated / 2007-2008 / All rights reserved. Address TSI Incorporated
More informationHD 2114P.0 HD 2114P.2 HD 2134P.0 HD 2134P.2
HD 2114P.0 HD 2114P.2 HD 2134P.0 HD 2134P.2 Batteries 4 1.5V type AA batteries Autonomy 200 hours with 1800mAh alkaline batteries Power absorbed with instrument off 20μA Mains models HD2114P.2 and HD2134P.2
More informationSURFACE THERMOMETERS 2301 FEDERAL AVENUE LOS ANGELES, CA FAX. website:
STANDARD DUAL MAGNET MOUNT THERMOMETER SINGLE OR DUAL MAX-MIN LAZY HANDS SURFACE THERMOMETERS FOUR MAGNET INDUSTRIAL RAILROAD THERMOMETER FULLY ENCLOSED SURFACE THERMOMETER DIRECT CONTACT SPOT CHECK SPRING
More information