Motor Vehicle Engineering 25 It deals with the design and maintenance of a motor vehicle and its accessories. The main courses in this stream are: IC Engine & Reciprocating Machine Motor Vehicle Engineering Automotive Maintenance Construction Equipment 26 1
Railway Engineering 27 It deals with design, manufacture, operation, management, control and maintenance of all forms of railway and related equipments and industrial systems. The profession plays a vital role in the establishment and sustainable operation of transport systems to boost the economy of the country in all aspects. The main courses in this stream are: Fundamentals of Railway systems Engineering Rail Motive Power Rail Vehicle Design 28 2
The main courses in this stream are: Fundamentals of Railway systems Engineering Rail Motive Power Rail Vehicle Design 29 5. Facilities Computing Facilities Two computer centers one for postgraduate program and the other for undergratuate. The two computer centers have 30 computers each. The following softwares are available: Algor FEM Analysis Ansys (FEA), Fluent CFD PROE Engineer,Solid works,catia,visual Studio Matlab Flex, Flint and LPA prolog expert system development tools. 30 3
Computer center in the department 31 The Mechanical Engineering Department has the following fully occupied laboratories to support the education and research activities that it undertakes. Fluid Machine and Thermal Laboratory Hydraulic and Pneumatic Machines Laboratory Materials Testing Laboratory Applied Mechanics and Control Laboratory and Mechatronics Laboratory 32 4
Fluid Machine and Thermal Laboratory Some of the equipments available for the education in this laboratory are: Boiler simulator with checks and fault generation Velocity distribution and pressure drop in circular duct Combustion chamber Air conditioning test stet-up Small wind tunnel Ultrasonic flow meters 33 Laboratories Boiler Simulator Air Conditioning Test Unit 34 5
Hydraulic and Pneumatic Machines Laboratory Hydraulic and Pneumatic Machines Laboratory is equipped with the following equipments: Flow measurement with nozzles and orifice Cooling tower Pipe friction test set-up Banki Turbine Test Bench Pelton Turbine Test bench Francis Turbine Test bench Centrifugal pump Test bench 35 Turbine test bench 36 6
Cooling Tower 37 Gas Turbine 38 7
Applied Mechanics Laboratory In this Laboratory we have the following equipments: Gyroscope Static and dynamic balancing apparatus Experimental module for journal bearing pressure distributor. Balance of reciprocating masses Whirling of shaft apparatus Cam-follower mechanism Cut- way models for worm, spur and bevel gears. Lathe gearing layout demonstrator. Cut way model for electromagnetic single disk break. 39 Balance of reciprocating masses 40 8
Cut way models of gear box 41 Mechatronics Laboratory Some of the equipments in this Lab are: Temperature control unit Pneumatic Trainers Hydraulic Trainers Electro-Pneumatic Trainers Electro-Pneumatic Trainers PLC module Some of the equipments are shown below: 42 9
PLC Module Pneumatic Trainers Hydraulic Trainer 43 Materials Testing Laboratory Some of the equipments in this lab are: Compact spark emission spectrometer for paid analysis of metals Computer-Electro hydraulic universal testing machine (maximum load 600kN) Metallographic analysis microscope with camera Metallographic microscope Tensile testing machine Hardness Tester Impact test machine Pictures of some of these equipments are shown below: 44 10
Compact Spark Emission Spectrometer for Paid Analysis of Metals 45 Computer-Electro hydraulic universal testing machine (maximum load 600kN) 46 11
Microscope 47 Automotive Laboratory The automotive laboratory is equipped with the following equipments: Diesel car chassis with front engine and rear drive 16 valve multipoint electronic injection four cylinder engine electrically operated Diesel engine (for car and lorry) Automotive electric system with fault finding facilities Injection system Injection distributor Light system demonstration board Oil pump with filter Diesel electro-injector Downdraft carburetor manual choke Some of the equipments in this laboratory are shown below: 48 12
16 Valve Multistage Electronic Injection Four Cylinder Engine (Electrically Operated) 49 Diesel Car Chassis with Front Engine and Rear Drive 50 13
Manufacturing Workshop The workshop is equipped with nearly all general purpose machinery necessary for manufacturing of small machineries and equipment. It has a huge soil tonnage hydraulic press for metal forming, 20 kg casting furnace, 5 lathe machines, 2 milling machines, 2 arc welding machines and 2 flame welding machines, CNC Lathe machines,cnc milling machines are available. Some of the equipments in the manufacturing workshop are shown below: 51 52 14
Lathe Machines 53 Shearing Machine 54 15
CNC Lathe Machine 55 56 16