Udvavisk. Engineering Analysis with CFD. 1st Floor (B), Tower II, Ramana Complex #322, Velachery Main Road Velachery, Chennai
|
|
- Frederick Douglas
- 5 years ago
- Views:
Transcription
1 Udvavisk Engineering Analysis with CFD 1st Floor (B), Tower II, Ramana Complex # Velachery, Chennai
2 1 Course outline 1.1 Engineering Analysis with CFD Flow and Aero-dynamic analyis around car body and aerofoil Flow Analysis in hydraulic valves, nozzle, mixer and air - diffuser Thermal analysis Heat Exchanger, boiler, HVAC problems Analysis of turbo-machine, compressor & Fans etc. Conceptual Understanding of Fluid mechanics, Heat transfer,navier-stoke's equation, finite Volume and other CFD techniques solving through software and programming Project 2.Offered Mini Projects We will be providing from 2 to 3 months to the students, The project will be covering a broad area both from (FEA/CFD) Structural as well as fluid and thermal analysis. So as to mention some of the major projects that students can undertake are as follows. 2.1 CFD Projects Field of applications: Gear box, Passenger car for aerodynamic drag reduction, Intake Port in diesel engine, Rear spoiler on a car, automotive exhaust system, Automotive radiator, Louvred fin compact heat exchanger, Aerodynamic trailer devices for drag Reduction of heavy duty trucks, Air induction systems, wind tunnel, HVAC mixing box, Heat and air flow inside a refrigerator, Heat exchanger, Helical coil heat exchanger. Type of Analysis in CFD Projects: Thermal analysis, Pressure analysis, Flow analysis, Heat transfer analysis, Velocity analysis, Combustion analysis, Particulate Tracking, Conduction in solids, Steady state & Unsteady steady state analysis, Unsteady state Transient analysis, Flow thermal analysis, etc. 2
3 3 List of problems for CFD workshop 1. Flow through valves In this project the velocity and pressure difference is analysed. 2. Analysis of air flow over sports car The main purpose of this analysis is to study the velocity and pressure difference across the car under the wind tunnel condition. 3. Flow Analysis of a Venturi Injector In this project an internal laminar fluid flow through a venturi injector is analysed. 3
4 4. External flow around a submarine Simulate external flow around a submarine and study the flow behavier over the submarine surface. 5. Flow through carburator In this project to study the thermal-flow effect on the choke and oscillator in the carburator. 6. Flow through an air intake maniflod This project shows an example of how the internal airflow through an air intake can be analyzed. 7. Flow analysis in a mixing diffuser Simulation study of mixing behavier and pressure drop character of the gases. 4
5 8. Transient wake development behind boat This simulation models the transient formation of wakes behind a boat in water. 9. Aerodynamic analysis of a SemiTruck Trailer vehicle The project simulates external aerodynamics of a Semi-truck trailer vehicle via steady state turbulent flow analysis with the K-Omega SST model for turbulence modeling. 10. Transient Simulation of an Exhaust Manifold Study the Flow Behavier of exchaust gas in Exhaust Manifold. 11. Reatachment flow: Flow over a Backward-facing Step The flow of air over a backwardfacing step is simulated, and the reattachment length is analysed. 5
6 12. Scalar Transport in T-Junction Pipe The purpose of this numerical simulation is to validate the scalar mixing distribution of incompressible Single Phase Scalar Transport in a T-junction pipe. 13. Aerodynamics analysis of a Formula One F1 Race car Study the flow Separation of air over the car body. 14. Fluid flow analysis of a pipe junction To study the mixing of same fluids with different velocity. 6
7 15. Pipeline Network This simulation captures the nuances of turbulent pipe flow. Flow phenomena at bends, junctions and nozzles are visualized. 16. Flow through a Naca duct This project shows an example of how the internal airflow through an naca duct can be analyzed. 17. Air-conditioning simulation of an office space In this Project Simulating the Temperature And Velocity Distribution inside The Air Conditioned Room. 7
8 18. HVAC analysis of aircraft cabin In this Project, Simulating Air flow inside the Cabine in order to find the pressure and velocity Distribution in the Cabin. 19. Gas flow through catalytic converter and exhaust Flow Simulation of Gas in Exchaust Pipe, To Find the Pressure Drop And Velocity Distribution in the flow passage. 20. Turbulent Pipe Flow The simulation validates the incompressible turbulent flow solver for the k-epsilon and komega SST turbulence models. 8
9 21. Hagen-Poiseuille Flow The aim of this project is to validate the velocity and pressure parameters of incompressible steady-state laminar fluid flow through a pipe 22. Air flow within a hall The simulation was set up using the analysis type for steady-state, natural convection flow in the winter season. 23. Airflow through an inlet duct An inlet duct with three additional turning vanes is analysed. The additional turning vanes in the corner to adjust the air flow through it. 24. Aerodynamics of a pipe with vent holes This project shows an example of how the internal airflow through a medical device can be analyzed. 9
10 25. Car cabin flow analysis To Find the Velocity And Temperature Distribution in inside the car Cabine ( Cabin HVAC System) 26. Turbulent airflow around a motorbike To study the turbulent effect over the bike and the human. 27. Turbulent flow through a cyclone separator This Project Study the Pressure Drop and Turbulance Behavir of Air in Cyclone Separator. 10
11 28. Simulation of airflow around a football In this case a football is investigated with regards to the turbulent behavior of the surface pattern. 29. Server room cooling The air temperature and velocity inside a server room is analyzed using a thermo-fluid analysis type on code-saturne. 30. Airflow around a building In this project to study the flow and vertex formation around the building. 11
AEROSTAR SOLUTIONS. A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS
AEROSTAR SOLUTIONS A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS We had started our project center for the students who are seems too weak in subjects, lack of sources,
More informationEFFECT OF SURFACE ROUGHNESS ON PERFORMANCE OF WIND TURBINE
Chapter-5 EFFECT OF SURFACE ROUGHNESS ON PERFORMANCE OF WIND TURBINE 5.1 Introduction The development of modern airfoil, for their use in wind turbines was initiated in the year 1980. The requirements
More informationFoundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References...
Contents Part I Foundations of Thermodynamics and Chemistry 1 Introduction... 3 1.1 Preface.... 3 1.2 Model-Building... 3 1.3 Simulation... 5 References..... 8 2 Reciprocating Engines... 9 2.1 Energy Conversion...
More informationVehicle Aerodynamics Subscription Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method
Vehicle Aerodynamics Subscription 2005-01-0544 Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method 2005-01-0545 A Downforce Optimization Study for a Racing Car Shape
More informationAPPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS
APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS BorgWarner: David Grabowska 9th November 2010 CD-adapco: Dean Palfreyman Bob Reynolds Introduction This presentation will focus
More informationChapter 1: Introduction to Automobile Aerodynamics...1
Preface...xv Acknowledgments...xix Chapter 1: Introduction to Automobile Aerodynamics...1 1.1 Scope... 1 1.1.1 The Role of Aerodynamics in Vehicle Design... 1 1.1.2 The Character of Vehicle Aerodynamics...
More informationInvestigation of Radiators Size, Orientation of Sub Cooled Section and Fan Position on Twin Fan Cooling Packby 1D Simulation
Investigation of Radiators Size, Orientation of Sub Cooled Section and Fan Position on Twin Fan Cooling Packby 1D Simulation Neelakandan K¹, Goutham Sagar M², Ajay Virmalwar³ Abstract: A study plan to
More informationState of the art cooling system development for automotive applications
State of the art cooling system development for automotive applications GT Conference 2017, Frankfurt A. Fezer, TheSys GmbH P. Sommer, A. Diestel, Mercedes-AMG GmbH Content Introduction Cooling system
More informationEXPERTS IN FLUID DYNAMICS AND STRUCTURAL ANALYSIS
EXPERTS IN FLUID DYNAMICS AND STRUCTURAL ANALYSIS Kinetic Sim is an engineering design and simulation consultancy specialising in computational fluid dynamics and structural analysis. Experience / Background
More informationAEROSTAR SOLUTIONS OUR MOTTO
AEROSTAR SOLUTIONS AERONAUTICAL, MECHANICAL AND AUTOMOBILE PROJECTS FOR FINAL YEAR STUDENTS Aerostar solutions is one of the pioneer project centre which has been started by industrial professionals to
More informationCFD ANALYSIS OF FLUID FLOW AND HEAT TRANSFER IN A SINGLE TUBE-FIN ARRANGEMENT OF AN AUTOMOTIVE RADIATOR
Proceedings of the International Conference on Mechanical Engineering 2005 (ICME2005) 28-30 December 2005, Dhaka, Bangladesh ICME05- CFD ANALYSIS OF FLUID FLOW AND HEAT TRANSFER IN A SINGLE TUBE-FIN ARRANGEMENT
More informationStudy of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car
Journal of Physics: Conference Series PAPER OPEN ACCESS Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car To cite this article: A Norizan et al 2017
More informationEFFECT OF SPOILER DESIGN ON HATCHBACK CAR
EFFECT OF SPOILER DESIGN ON HATCHBACK CAR Ashpak Kazi 1 *, Pradyumna Acharya 2, Akhil Patil 3 and Aniket Noraje 4 1,2,3,4 Department of Automotive Engineering, School of Mechanical Engineering, VIT University,
More informationThermal Analysis of Shell and Tube Heat Exchanger Using Different Fin Cross Section
Thermal Analysis of Shell and Tube Heat Exchanger Using Different Fin Cross Section J. Heeraman M.Tech -Thermal Engineering Department of Mechanical Engineering Ellenki College of Engineering & Technology
More informationAERODYNAMIC BICYCLE HELMET DESIGN USING A TRUNCATED AIRFOIL WITH TRAILING EDGE MODIFICATIONS
Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011 November 11-17, 2011, Denver, Colorado, USA IMECE2011-65411 AERODYNAMIC BICYCLE HELMET DESIGN USING A TRUNCATED
More informationSTAR European Conference 2010 AERODYNAMICS DEVELOPMENTS ON A LE MANS PROTOTYPE ORECA 01 LMP1
STAR European Conference 2010 AERODYNAMICS DEVELOPMENTS ON A LE MANS PROTOTYPE ORECA 01 LMP1 PRESENTATION 1. ORECA Presentation 2. Why we use CFD? 2009 Aero Development 2010 Aero Development 3. Methodology
More informationISSN (Online)
Computational Analysis of Aerodynamics Effects of a Rear Wing/Spoiler of Formula 1Car. [1] Piyush Chavda, [2] Darshan Ajuida. [1] M.Tech student, Department of Mechanical Engineering, Marwadi Education
More informationSeeing Sound: A New Way To Reduce Exhaust System Noise
\ \\ Seeing Sound: A New Way To Reduce Exhaust System Noise Why Do You Need to See Sound? Vehicle comfort, safety, quality, and driver experience all rely on controlling the noise made by multiple systems.
More informationAUTOMOTIVE TESTING AND OPTIMIZATION. Tools for designing tomorrow's vehicles
AUTOMOTIVE TESTING AND OPTIMIZATION Tools for designing tomorrow's vehicles 2 Measurement of flow around the side mirror by Particle Image Velocimetry (PIV). Courtesy of Visteon Deutschland GmbH Our advanced
More informationDesign and Optimization of Contra-Rotating Fans Oliver Velde #, Christian Friebe &, Marius Korfanty #
Design and Optimization of Contra-Rotating Fans Oliver Velde #, Christian Friebe &, Marius Korfanty # # CFturbo GmbH & ILK Institut für Luft- und Kältetechnik ggmbh Motivation to use Contra-rotating fans
More informationNUMERICAL INVESTIGATION OF PISTON COOLING USING SINGLE CIRCULAR OIL JET IMPINGEMENT
NUMERICAL INVESTIGATION OF PISTON COOLING USING SINGLE CIRCULAR OIL JET IMPINGEMENT BALAKRISHNAN RAJU, CFD ANALYSIS ENGINEER, TATA CONSULTANCY SERVICES LTD., BANGALORE ABSTRACT Thermal loading of piston
More informationAnalysis of Aerodynamic Performance of Tesla Model S by CFD
3rd Annual International Conference on Electronics, Electrical Engineering and Information Science (EEEIS 2017) Analysis of Aerodynamic Performance of Tesla Model S by CFD Qi-Liang WANG1, Zheng WU2, Xian-Liang
More informationAERODYNAMIC IMPROVEMENT OF A TRUCK BODY BY USING CFD
AERODYNAMIC IMPROVEMENT OF A TRUCK BODY BY USING CFD K. Durga Priyanka #1 and Dr. B. Jayachandraiah *2 #1 M.Tech Student, CAD/CAM, Srikalahasteeswara institute of technology, Srikalahasthi, Chittoor dist,
More informationDESIGN AND ANALYSIS OF UNDERTRAY DIFFUSER FOR A FORMULA STYLE RACECAR
DESIGN AND ANALYSIS OF UNDERTRAY DIFFUSER FOR A FORMULA STYLE RACECAR Ali Asgar S. Khokhar 1, Suhas S. Shirolkar 2 1 Graduate in Mechanical Engineering, KJ Somaiya College of Engineering, Mumbai, India.
More informationNUMERICAL INVESTIGATION OF FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS ON THE AERODYNAMICS OF VENTILATED DISC BRAKE ROTOR USING CFD
THERMAL SCIENCE: Year 2014, Vol. 18, No. 2, pp. 667-675 667 NUMERICAL INVESTIGATION OF FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS ON THE AERODYNAMICS OF VENTILATED DISC BRAKE ROTOR USING CFD by Thundil
More informationNumerical Investigation of the Effect of Excess Air and Thermal Power Variation in a Liquid Fuelled Boiler
Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT 16) Prague, Czech Republic April 4 5, 2016 Paper No. CSP 105 DOI: 10.11159/csp16.105 Numerical Investigation of the Effect of
More informationCONJUGATE HEAT TRANSFER ANALYSIS OF HELICAL COIL HEAT EXCHANGE USING CFD
CONJUGATE HEAT TRANSFER ANALYSIS OF HELICAL COIL HEAT EXCHANGE USING CFD Rudragouda R Patil 1, V Santosh Kumar 2, R Harish 3, Santosh S Ghorpade 4 1,3,4 Assistant Professor, Mechanical Department, Jayamukhi
More informationEngineering Success by Application of STAR-CCM+ for Modern Gas Turbine Design
STAR Japanese Conference 2013 December 3, Yokohama, Japan Engineering Success by Application of STAR-CCM+ for Modern Gas Turbine Design Norbert Moritz, Karsten Kusterer, René Braun, Anis Haj Ayed B&B-AGEMA
More informationTHERMAL ANALYSIS OF PISTON BLOCK USING FINITE ELEMENT ANALYSIS
THERMAL ANALYSIS OF PISTON BLOCK USING FINITE ELEMENT ANALYSIS Pushpandra Kumar Patel 1, Vikky Kumhar 2 1 BE Student, 2 Assistant Professor Department of Mechanical Engineering, SSTC-SSGI, Junwani, Bhilai,
More informationTHERMAL ANALYSIS OF HELICALLY GROOVED COIL IN A CONCENTRIC TUBE HEAT EXCHANGER
THERMAL ANALYSIS OF HELICALLY GROOVED COIL IN A CONCENTRIC TUBE HEAT EXCHANGER A. RESHMA P.G Scholar, Thermal Engineering, Aditya Engineering College, Surampalem M.SREENIVASA REDDY Professor, Mechanical
More informationINVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF CIRCULAR AND DIAMOND PILLARED VANE DISC BRAKE ROTOR USING CFD
SDRP JOURNAL OF NANOTECHNOLOGY & MATERIAL SCIENCE. INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF CIRCULAR AND DIAMOND PILLARED VANE DISC BRAKE ROTOR USING CFD Research AUTHOR: A.RAJESH JUNE 2017 1
More informationCFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate
CFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate Sandeep M, U Sathishkumar Abstract In this paper, a study of different cross section bundle arrangements
More informationDESIGN OF AUTOMOBILE S BODY SHAPE AND STUDY ON EFFECT OF AERODYNAMIC AIDS USING CFD ANALYSIS
DESIGN OF AUTOMOBILE S BODY SHAPE AND STUDY ON EFFECT OF AERODYNAMIC AIDS USING CFD ANALYSIS Akshay S 1, Ashik Vincent 2, Athul Anand R 3, George Kurian 4, Dr. Shajan Kuriakose 5 1,2,3,4 B-Tech Degree
More informationAerodynamic Study of the Ahmed Body in Road-Situations using Computational Fluid Dynamics
Aerodynamic Study of the Ahmed Body in Road-Situations using Computational Fluid Dynamics R. Manimaran Thermal and Automotive Research Group School of Mechanical and Building Sciences VIT University (Chennai
More informationCFD Analysis of Oil Cooler Duct for Turboprop Aircraft Engine in Pusher Configuration
CFD Analysis of Oil Cooler Duct for Turboprop Aircraft Engine in Pusher Configuration Abhijeet B. Chougule 1, Vinay C A. 2, Dr. Saleel Ismail 3 M.Tech Student, SMBS, VIT University, Chennai, India 1 Scientist,
More informationAustralian Journal of Basic and Applied Sciences
AENSI Journals Australian Journal of Basic and Applied Sciences ISSN:1991-8178 Journal home page: www.ajbasweb.com Efficient and Environmental Friendly NO x Emission Reduction Design of Aero Engine Gas
More informationGas exchange process for IC-engines: poppet valves, valve timing and variable valve actuation
Gas exchange process for IC-engines: poppet valves, valve timing and variable valve actuation Topics Analysis of the main parameters influencing the volumetric efficiency in IC engines: - Valves and valve
More informationProgramme area 4a. Fluid Energy Machines
Programme area 4a Fluid Energy 136 Contents: Fundamentals of Fluid Mechanics 138 Thermodynamics 140 Mechanics / Other 142 Power Engines Hydroturbines Pelton...143 Francis...144 others...145 Steam Turbines...146
More informationChapter 7: Thermal Study of Transmission Gearbox
Chapter 7: Thermal Study of Transmission Gearbox 7.1 Introduction The main objective of this chapter is to investigate the performance of automobile transmission gearbox under the influence of load, rotational
More informationFLUID FLOW. Introduction
FLUID FLOW Introduction Fluid flow is an important part of many processes, including transporting materials from one point to another, mixing of materials, and chemical reactions. In this experiment, you
More informationCombustion Equipment. Combustion equipment for. Solid fuels Liquid fuels Gaseous fuels
Combustion Equipment Combustion equipment for Solid fuels Liquid fuels Gaseous fuels Combustion equipment Each fuel type has relative advantages and disadvantages. The same is true with regard to firing
More informationPerformance Calculation of Vehicle Radiator Group using CFD
Performance Calculation of Vehicle Radiator Group using CFD Mr.Sonu Thomas 1, Mr.V. Karthikeyan 2,Dr.G. Nallakumarasamy 3 1 PG Scholar, Department of Mechanical Engg, Excel Engineering College, Tamilnadu
More informationFLUID DYNAMICS TRANSIENT RESPONSE SIMULATION OF A VEHICLE EQUIPPED WITH A TURBOCHARGED DIESEL ENGINE USING GT-POWER
GT-SUITE USERS CONFERENCE FRANKFURT, OCTOBER 20 TH 2003 FLUID DYNAMICS TRANSIENT RESPONSE SIMULATION OF A VEHICLE EQUIPPED WITH A TURBOCHARGED DIESEL ENGINE USING GT-POWER TEAM OF WORK: A. GALLONE, C.
More informationIJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 06, 2016 ISSN (online):
IJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 06, 2016 ISSN (online): 2321-0613 Aerodynamic Drag Reduction on Vehicle with and without Spoiler Rajath. H.R 1 Mrs. Shweta
More informationAerodynamic Drag Assessment
Aerodynamic Drag Assessment Computer Fluid Dynamics (CFD) analysis was used in the ULSAB-AVC Program to evaluate the aerodynamic concept from the very beginning of vehicle concepts. 11.1 BACKGROUND A vehicle
More informationJournal Online Jaringan COT POLIPD (JOJAPS) Fluid Flow Analysis of Micro Gas Turbine Using Computational Fluid Dynamics (CFD)
JOJAPS eissn 2504-8457 Journal Online Jaringan COT POLIPD (JOJAPS) Flow Analysis of Micro Gas Turbine Using Computational Dynamics (CFD) Eko Prasetyo, Rudi Hermawan, Angger Liyundira Putra, D.L Zariatin
More informationMotor Vehicle Engineering
Motor Vehicle Engineering 25 It deals with the design and maintenance of a motor vehicle and its accessories. The main courses in this stream are: IC Engine & Reciprocating Machine Motor Vehicle Engineering
More informationCOLD PLATE SOFTWARE PROGRAM ANALYZES AIRCRAFT
COLD PLATE SOFTWARE PROGRAM ANALYZES AIRCRAFT DISPLAY T. Renaud Sanders, a Lockheed Martin Co. Nov, 2000 Introduction Finned heat exchangers, called cold plates, have been used for many years to cool military
More informationThe hepia Moto2 Aerodynamic Program - From CFD to the Track
The hepia Moto2 Aerodynamic Program - From CFD to the Track Patrick Haas, Prof. HES www.cmefe.ch SWISS UNIVERSITIES OF APPLIED SCIENCES AND ARTS hepia (Geneva) 7 Universities + 2 private 80 000 Students
More informationinjection on a cold start system
CFD analysis of fuel injection on a cold start system CFD analysis of fuel injection on a cold start system Martin Kessler Regis Ataides Victor Arume de Souza Cesareo de La Rosa Siqueira Alessandro F.
More informationCFD Simulation of Dry Low Nox Turbogas Combustion System
CFD Simulation of Dry Low Nox Turbogas Combustion System L. Bucchieri - Engin Soft F. Turrini - Fiat Avio CFX Users Conference - Friedrichshafen June 1999 1 Objectives Develop a CFD model for turbogas
More informationEnhanced Heat Transfer Surface Development for Exterior Tube Surfaces
511 A publication of CHEMICAL ENGINEERING TRANSACTIONS VOL. 32, 2013 Chief Editors: Sauro Pierucci, Jiří J. Klemeš Copyright 2013, AIDIC Servizi S.r.l., ISBN 978-88-95608-23-5; ISSN 1974-9791 The Italian
More informationA Parametric CFD Study of a Generic Pickup Truck and Rear Box Modifications
Abstract A Parametric CFD Study of a Generic Pickup Truck and Rear Box Modifications Wael Mokhtar; Md Maruf Hossain, and Samira Ishrat Jahan, School of Engineering, Grand valley State University, Grand
More informationEXPERIMENTAL INVESTIGATIONS OF DOUBLE PIPE HEAT EXCHANGER WITH TRIANGULAR BAFFLES
International Research Journal of Engineering and Technology (IRJET) e-issn: 2395-56 Volume: 3 Issue: 8 Aug-216 www.irjet.net p-issn: 2395-72 EXPERIMENTAL INVESTIGATIONS OF DOUBLE PIPE HEAT EXCHANGER WITH
More informationComparison of Swirl, Turbulence Generating Devices in Compression ignition Engine
Available online atwww.scholarsresearchlibrary.com Archives of Applied Science Research, 2016, 8 (7):31-40 (http://scholarsresearchlibrary.com/archive.html) ISSN 0975-508X CODEN (USA) AASRC9 Comparison
More informationAutomation of Optimal Design of Air Preheater s Corrugated Heating Elements using CFD
Automation of Optimal Design of Air Preheater s Corrugated Heating Elements using CFD Mousumi Roy Former faculty, Department of Mechanical Engineering CVSR Engg. College, Hyderabad., Telangana state,india
More informationCROWN WAFER NOZZLE CHECK VALVES
CROWN WAFER NOZZLE CHECK VALVES Leading the Way in Pipeline Technology Product Scope and Applications PRODUCT SCOPE Sizes 2-12 ASME B16.34 and API 6D, pressure classes 150-900 Valve is offered in a wafer
More informationInvestigation for Flow of Cooling Air through the Ventilated Disc Brake Rotor using CFD
International Journal of Thermal Technologies E-ISSN 2277 4114 2015 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijtt/ Research Article Investigation for Flow of Cooling Air
More informationNACA Duct Another common intake is the NACA duct, which, due to its shape, has a high efficiency with little additional drag. NACA ducts, for proper
AERO 101 Greetings again and welcome to the eleventh segment of Aero 101. Sorry we re a day late! Today we will talk about hood vents and internal airflow. Cooling inlets (ducts) and exits, much like the
More informationDesign of a Custom Vortex generator Optimization of Vehicle Drag and Lift Characteristics
Design of a Custom Vortex generator Optimization of Vehicle Drag and Lift Characteristics Naveen. S 1, Vipin Prakkash 2, Sukanth Kannan 3 1, 2, 3 Senior Engineer, Sharda Motor Industries Limited R&D, Chennai,
More informationInternational Journal of Scientific & Engineering Research, Volume 5, Issue 7, July-2014 ISSN
ISSN 9-5518 970 College of Engineering Trivandrum Department of Mechanical Engineering arundanam@gmail.com, arjunjk91@gmail.com Abstract This paper investigates the performance of a shock tube with air
More informationVehicle Side-Window Defrosting and Demisting Process
Vehicle Side-Window Defrosting and Demisting Process A. Aroussi, A. Hassan Flow Diagnostics Laboratory, School of M3EM, The University of Nottingham, UK. ABSTRACT The thermal comfort of passengers within
More informationSimulation Studies on the Effect of Porous Twisted Plate Inserts on the Performance of Fire Tube Steam Packaged Boiler
Simulation Studies on the Effect of Porous Twisted Plate Inserts on the Performance of Fire Tube Steam Packaged Boiler S. Hassan *,a, M. K. Roslim b and R. M. Zain c Mechanical Engineering Department,
More informationSIMULIA Overview: Accelerating Innovation with Realistic Simulation
SIMULIA Overview: Accelerating Innovation with Realistic Simulation SIMULIA Overview Agenda SIMULIA Mission & Brand Position SIMULIA Product Portfolio Industry Examples Summary 2 SIMULIA Vision To Make.
More informationPorsche Engineering driving technologies
European GT-Suite User Conference 2016 Frankfurt am Main, 17. Oktober 2016 Real Drive Efficiency Improvement in turbocharged Engines by the use of Expansion Intake Manifold Content > Introduction Motivation
More informationNumerical Simulation of Gas Turbine Can Combustor Engine
Numerical Simulation of Gas Turbine Can Combustor Engine CH UMAMAHESHWAR PRAVEEN 1*, A HEMANTH KUMAR YADAV 2 1. Engineer, CDG BOEING Company, Chennai, India. 2. B.Tech Aeronautical Engineer 2012 passout,
More informationAguk Zuhdi Muhammad Fathallah 1, Wolfgang Busse 2, Fadhil Rizki Clausthaldi 3
(pissn: 2541-5972, eissn: 2548-1479) 39 Fluid Flow Analysis of Jacket Cooling System for Marine Diesel Engine 93 KW Aguk Zuhdi Muhammad Fathallah 1, Wolfgang Busse 2, Fadhil Rizki Clausthaldi 3 Abstract
More informationAerodynamic Characteristics of Sedan with the Rolling Road Ground Effect Simulation System
Vehicle Engineering (VE) Volume 2, 2014 www.seipub.org/ve Aerodynamic Characteristics of Sedan with the Rolling Road Ground Effect Simulation System Yingchao Zhang 1, Linlin Ren 1, Kecheng Pan 2, Zhe Zhang*
More informationFLOW AND HEAT TRANSFER ENHANCEMENT AROUND STAGGERED TUBES USING RECTANGULAR VORTEX GENERATORS
FLOW AND HEAT TRANSFER ENHANCEMENT AROUND STAGGERED TUBES USING RECTANGULAR VORTEX GENERATORS Prabowo, Melvin Emil S., Nanang R. and Rizki Anggiansyah Department of Mechanical Engineering, ITS Surabaya,
More informationCFD analysis of heat transfer enhancement in helical coil heat exchanger by varying helix angle
CFD analysis of heat transfer enhancement in helical coil heat exchanger by varying helix 1 Saket A Patel, 2 Hiren T Patel 1 M.E. Student, 2 Assistant Professor 1 Mechanical Engineering Department, 1 Mahatma
More informationEffect of Air-Dam on Low End Passenger Cars
Effect of Air-Dam on Low End Passenger Cars Abhinav Damle 1, Amitkumar Magdum 1, Isha Tikekar 1 1 DepartmentofAutomotiveEngineering,SchoolofMechanicalEngineering,VITUniversity,Vellore, TamilNadu,India,632014
More informationThe use of CFD at hepia The Swiss Team Moto2 fastest of the World Championship
The use of CFD at hepia The Swiss Team Moto2 fastest of the World Championship Patrick Haas, Prof. HES Mechanical Engineering www.cmefe.ch MOTORSPORTS AT HEPIA Egli Motorradtechnik (1985) Bachelor thesis
More informationDevelopment Summary 2013 Scion FR-S by AEM Induction
Development Summary 2013 Scion FR-S by AEM Induction On the way to SEMA 2012 This is no show queen. We drive/race what we build. Trailers are for wimps. The all-new 2013 Scion FR-S combines Subaru s newly
More informationSTUDY OF NOZZLE INJECTOR PERFORMANCE USING CFD
STUDY OF NOZZLE INJECTOR PERFORMANCE USING CFD Vimal Kumar Pathak 1 and Sumit Gupta 2 1,2 Department of Mechanical Engineering, MNIT, Jaipur ABSTRACT The aim of this paper is to study the performance of
More informationPROJECT PORTFOLIO. A list of projects completed by Sukra Helitek and their briefs Sukra Helitek 1 P a g e 33
PROJECT PORTFOLIO A list of projects completed by Sukra Helitek and their briefs 2017 Sukra Helitek 1 P a g e 33 contact@sukra-helitek.com OUR VALUABLE CUSTOMERS 2017 Sukra Helitek 2 P a g e 33 contact@sukra-helitek.com
More informationDESIGN OPTIMIZATION OF INDUSTRIAL STEAM VENT SILENCER FOR BETTER FLOW PROCESS AND NOISE REDUCTION BY CFD AND SIDLAB SIMULATION
DESIGN OPTIMIZATION OF INDUSTRIAL STEAM VENT SILENCER FOR BETTER FLOW PROCESS AND NOISE REDUCTION BY CFD AND SIDLAB SIMULATION Shahid Nadeem #1,, K.S.Shashishekar #2, #1. M.Tech student (Thermal Power
More informationDesigning & Validating a New Intake Manifold for a Formula SAE Car
Designing & Validating a New Intake Manifold for a Formula SAE Car Arpit Singhal 1 1 (M.Tech (Computational Fluid Dynamics) University of Petroleum &Energy Studies, India Abstract This paper gives the
More information2008 International ANSYS Conference
2008 International ANSYS Conference NUMERICAL OPTIMIZATION UTILIZING FLUID, THERMAL AND STRUCTURAL MODELING OF THE 155 MM NLOS-C MUZZLE BRAKE Robert Carson RDECOM/ARDEC/WSEC Benet Labs Jeffrey Greer RDECOM/ARDEC/WSEC
More informationCFD on Cavitation around Marine Propellers with Energy-Saving Devices
63 CFD on Cavitation around Marine Propellers with Energy-Saving Devices CHIHARU KAWAKITA *1 REIKO TAKASHIMA *2 KEI SATO *2 Mitsubishi Heavy Industries, Ltd. (MHI) has developed energy-saving devices that
More informationCross Flow Heat Exchanger H352
Cross Flow Heat Exchanger H352 H352 Shown With Optional Plain Tube of H352A fitted. Allows Investigation Of Plain And Finned Cross Flow Heat Exchangers. Expandable Free & Forced Convection Heat Transfer
More informationCOMPUTATIONAL FLOW MODEL OF WESTFALL'S 2900 MIXER TO BE USED BY CNRL FOR BITUMEN VISCOSITY CONTROL Report R0. By Kimbal A.
COMPUTATIONAL FLOW MODEL OF WESTFALL'S 2900 MIXER TO BE USED BY CNRL FOR BITUMEN VISCOSITY CONTROL Report 412509-1R0 By Kimbal A. Hall, PE Submitted to: WESTFALL MANUFACTURING COMPANY May 2012 ALDEN RESEARCH
More informationIMPROVING BOILER COMBUSTION USING COMPUTATIONAL FLUID DYNAMICS MODELLING
REFEREED PAPER IMPROVING BOILER COMBUSTION USING COMPUTATIONAL FLUID DYNAMICS MODELLING VAN DER MERWE SW AND DU TOIT P John Thompson, Sacks Circle, Bellville South, 7530, South Africa schalkv@johnthompson.co.za
More informationValidation and Optimization of Front End Cooling Module for Commercial Vehicle using CFD Simulation
Validation and Optimization of Front End Cooling Module for Commercial Vehicle using CFD Simulation Ashok Patidar, Umashanker Gupta, Nitin Marathe VE Commercial Vehicles Ltd. INDIA (A VOLVO GROUP AND EICHER
More informationExhaust line simulations using Star-CCM+ and automation Yohann Perrot
Exhaust line simulations using Star-CCM+ and automation Yohann Perrot 22-March-2010 Agenda Faurecia Emissions Control Technologies Exhaust line components Some correlations and investigations Enhancements
More informationAnalysis of Exhaust System using AcuSolve
Analysis of Exhaust System using AcuSolve Abbreviations: CFD (Computational Fluid Dynamics), EBP (Exhaust Back Pressure), RANS (Reynolds Averaged Navier Stokes), Spalart Allmaras (SA), UI (Uniformity Index)
More informationCross Flow Heat Exchanger H352
Cross Flow Heat Exchanger H352 H352 Cross Flow Heat Exchanger Shown With Optional Plain Tube of H352A fitted. Allows Investigation Of Plain And Finned Cross Flow Heat Exchangers. Expandable Free & Forced
More informationIntegrated 1D-MultiD Fluid Dynamic Models for the Simulation of I.C.E. Intake and Exhaust Systems
Integrated -MultiD Fluid Dynamic Models for the Simulation of I.C.E. Intake and Exhaust Systems G. Montenegro, A. Onorati, F. Piscaglia, G. D Errico Politecnico di Milano, Dipartimento di Energetica, Italy
More informationFluid Structure Interaction Simulation of Hood Flutter
Fluid Structure Interaction Simulation of Hood Flutter James Dilworth, Ben Ashby, Peter Young Arup Abstract Fluid structure interaction problems appear in a wide range of industries, including automotive,
More informationEffect of Stator Shape on the Performance of Torque Converter
16 th International Conference on AEROSPACE SCIENCES & AVIATION TECHNOLOGY, ASAT - 16 May 26-28, 2015, E-Mail: asat@mtc.edu.eg Military Technical College, Kobry Elkobbah, Cairo, Egypt Tel : +(202) 24025292
More informationNumerical Simulation of the Thermoelectric Model on Vehicle Turbocharged Diesel Engine Intercooler
Research Journal of Applied Sciences, Engineering and Technology 6(16): 3054-3059, 013 ISSN: 040-7459; e-issn: 040-7467 Maxwell Scientific Organization, 013 Submitted: January 1, 013 Accepted: January
More informationCoupling of SERPENT and OpenFOAM for MSR analysis
Coupling of SERPENT and OpenFOAM for MSR analysis Olga Negri Supervisor Prof. Tim Abram, University of Manchester Co-supervisor Dr. Hywel Owen, University of Manchester Industrial supervisor Steve Curr,
More information1. Aero-Science B.Sc. Aero Science-I Total Mark: 100 Appendix A (Outlines of Tests) Aero-Engines : 100 Marks
1. Aero-Science B.Sc. Aero Science-I Total Mark: 100 Appendix A (Outlines of Tests) Aero-Engines : 100 Marks Note:- The questions will be set in each paper. Candidates are to attempt any five except in
More informationSimulating Systems in Ground Vehicle Design Frederick J. Ross Director, Ground Transportation
Simulating Systems in Ground Vehicle Design Frederick J. Ross Director, Ground Transportation Agenda: Simulating Systems Maturity of Simulation Growing from validation to virtual simulation Simulating
More informationAircraft Propulsion Technology
Unit 90: Aircraft Propulsion Technology Unit code: L/601/7249 QCF level: 4 Credit value: 15 Aim This unit aims to develop learners understanding of the principles and laws of aircraft propulsion and their
More informationApplied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
More informationInfluence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating Compressor
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2014 Influence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating
More informationSports Car Brake Cooling Simulation with CAD-Embedded CFD
Automotive Sports Car Brake Cooling Simulation with CAD-Embedded CFD By Mike Gruetzmacher, FloEFD Product Specialist, Mentor Graphics B rake cooling is a crucial area in motorsport and sports car engineering.
More informationComputational Fluid Dynamics in Torque Converters: Validation and Application
Rotating Machinery, 9: 411 418, 2003 Copyright c Taylor & Francis Inc. ISSN: 1023-621X print DOI: 10.1080/10236210390241646 Computational Fluid Dynamics in Torque Converters: Validation and Application
More informationEffect of Helix Parameter Modification on Flow Characteristics of CIDI Diesel Engine Helical Intake Port
Effect of Helix Parameter Modification on Flow Characteristics of CIDI Diesel Engine Helical Intake Port Kunjan Sanadhya, N. P. Gokhale, B.S. Deshmukh, M.N. Kumar, D.B. Hulwan Kirloskar Oil Engines Ltd.,
More informationDesign and Performance Analysis of Louvered Fin Automotive Radiator using CAE Tools
Design and Performance Analysis of Louvered Fin Automotive Radiator using CAE Tools Vishwa Deepak Dwivedi Scholar of Master of Technology, Mechanical Engineering Department, UCER, Allahabad, India Ranjeet
More information