tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0

Similar documents
W.V. (V) tan δ For capacitance value > 1000 µf, add 0.02 per every 1000 µf.

-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C

4.0±0.5 (3.5) Top of spin. Standard terminal type does not require terminal trimming peocess.

Aluminum Electrolytic Capacitors (Radial Lead Type)

Frequency (Hz) 50, k 10 k to Correction factor min. 3 min.

Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type

Size code Rated W.V. Cap. change. 4 W.V to 50 W.V. 6.3 W.V > 10 W.V 1000 hours ±20 % < 200 % initial specifi ed value

Snap-in Type Aluminium Electrolytic Capacitors

Miniature Aluminum Electrolytic Ca pac i tors

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20

LPH Large Capacitance Aluminum Electrolytic Capacitors

16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:

Snap-in Type Aluminium Electrolytic Capacitors

6.3 W.V < D(06.3) Miniature > 10 W.V 1000 hours ±20 %

Aluminum Electrolytic Capacitor JNK

For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k

DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents

Surface Mount Aluminum Electrolytic Capacitors

ESC Aluminum Electrolytic Capacitors

Japan Malaysia China. Frequency(Hz) k 10k 100k 1.0 to φ10. ( 6.3mm dia) Vent P±0.5

Radial Aluminium Electrolytic Capacitors 105 C

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C

Surface Mount Aluminum Electrolytic Capacitors

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc.

Aluminum Electrolytic Capacitors (Radial Lead Type)

Country of Origin. Japan

Surface Mount Aluminum Electrolytic Capacitors

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life

Summary of Specifications

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. I=0.01CV or 3(uA) after 2 minutes with rated working voltage

Large Can Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors NACEW Series

ECE-A1HKA010 ECE-A1HKA010B ECE-A1HKA010I ECE-A1HKS010 ECE-A1HKS010B ECE-A1HKS010I ECE-A1HKSR47 ECE-A1HKSR47B ECE-A1HKSR47I EEA-GA1H1R0 EEA-GA1H1R0B

Surface Mount Aluminum Electrolytic Capacitors

Country of Origin. Standard. -40 to + 85 C 6.3 to 100 V.DC 0.1 to µ F ±20 % (120Hz/+20 C) Please see the attached standard products list

SMM SERIES Engineering Bulletin Mar 07

Aluminum Capacitors Power High Ripple Current Screw Terminals

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size

Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)

Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size

55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A

Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available

K05 TYPE -40 C +105 C 5000H

handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C

Radial Type Aluminium Electrolytic Capacitors

KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature

Summary of Specifications

handbook, halfpage lower RLL 116

Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550

ALS40. ALS41 Stud Mounting

ALS30. ALS31 Stud Mounting

Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR

Summary of Specifications

U36D SERIES Engineering Bulletin Mar 07

Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.

FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8

CapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors

Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF

Aluminum Electrolytic Capacitors Radial Very Low Impedance

TMJ Tantalum SMD S1gma TM Series Capacitors

Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum

Wet Tantalum Tubular Capacitors

Aluminum Capacitors Power Ultra Long Life Snap-In

LLS LLS ALUMINUM ELECTROLYTIC CAPACITORS. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature

Aluminum Capacitors Power High Ripple Current Snap-In

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance

Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)

Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE

MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)

Summary of Specifications

Surface Mount Aluminum Electrolytic Capacitors

APPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max

Case. Without Insulating With Insulatiing E Size Size (0.016)

STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.

Contents CORNELL DUBILIER

Aluminum Capacitors, Power High Ripple Current, Screw Terminals

YAGEO Corporation Date: 01/17/2007

Summary of Specifications

FEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION

Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Single-ended capacitors. Date: August 2008

Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In

Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In

Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals

Surface Mount Aluminum Electrolytic Capacitors

Conductive Polymer Aluminum Electrolytic Capacitors

YAGEO Corporation Date: 01/17/2007

Type 4CMC 85 ºC, High Cap, Plug-in, Radial Leaded Aluminum Rugged Value, High-Capacitance 85 C Board-Mount Type

Features : Series Table. Electric Double Layer Capacitors

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES

industrial.panasonic.com/

Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors

SWITCH-MODE CERAMIC CAPACITORS

ALC40 Series 105 C. RoHS. Compliant

ALC10 Series 85 C. RoHS. Compliant

Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Snap-in capacitors. Date: April 2008

2014 CATALOG. Electrolytic Capacitors. industrial.panasonic.com/ww/

Transcription:

Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C Rated Range 6.3 V.DC to 35 V.DC Nominal Range 180 µf to 0 µf Capacitance Tolerance ±20 % (120 Hz/+20 C) DC Leakage Cur rent I < 0.01 CV (µa) After 2 minutes 6.3 10 16 25 35 tan δ tan δ 0.22 0.19 0.16 0.14 0.12 (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. Endurance Shelf Life After following life test with DC voltage and +105 C±2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restored to 20 C, the capacitors shall meet the limits specifi ed bellow. Duration : φ8: 3000 hours, φ10: 4000 hours, φ12.5 to φ18: 5000 hours Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specifi ed value DC leakage current < initial specifi ed value After storage for 1000 hours at +105 C±2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment) Frequency correction factor for ripple current (V.DC) Cap (µf) Frequency (Hz) 60 120 1 k 10 k 100 k 180 to 330 0.60 0.70 0.85 0.95 1.00 6.3 to 35 390 to 1000 0.65 0.75 0.90 0.98 1.00 to 0 0.75 0.80 0.95 1.00 1.00 Di men sions in mm (not to scale) Sleeve φd±0.05 Pressure relief + φ8 φ10< [mm] L 14 min. 3 min. φd±0.5 F±0.5 φd±0.5 L<16 :L±1.5 L>20 :L±2.0 Body φd 8 10 12.5 16 18 Body Length L 12.5 to 25 30 to 40 Lead φd 0.6 0.6 0.6 0.8 0.8 0.8 Lead space F 3.5 5.0 5.0 5.0 7.5 7.5 (mm) May. 2008

Case size/impedance/ripple current Imped ance ( )/(100 khz) Ripple (ma r.m.s.)/(100 khz) Case size (φd L) +20 C 10 C +105 C 8 11.5 0.090 0.180 630 8 15 0.062 0.124 860 8 20 0.044 0.088 1220 10 12.5 0.063 0.126 900 10 16 0.049 0.098 1240 10 20 0.035 0.070 1490 10 25 0.033 0.066 1680 10 30 0.025 0.050 2140 12.5 15 0.048 0.096 1400 12.5 20 0.029 0.058 1890 12.5 25 0.022 0.044 2280 12.5 30 0.018 0.036 2720 12.5 35 0.016 0.032 2940 12.5 40 0.014 0.028 3010 16 15 0.038 0.076 16 20 0.026 0.052 2330 16 25 0.019 0.038 2760 18 15 0.036 0.072 2060 18 20 0.025 0.050 2640 18 25 0.018 0.036 2850 Jan. 2008

6.3 10 680 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK0J681( ) 200 1000 1000 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK0J102L( ) 200 1000 10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK0J102( ) 200 500 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK0J152L( ) 200 1000 1500 10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK0J152( ) 200 500 12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK0J182S( ) 200 500 3300 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK0J222( ) 200 500 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK0J222L( ) 200 500 10 30 2140 0.025 4000 0.6 5.0 EEUFK0J332L 100 12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK0J332( ) 200 500 16 15 0.038 5000 0.8 7.5 7.5 EEUFK0J332S( ) 100 250 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK0J472( ) 200 500 18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK0J472S( ) 100 250 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK0J562L 100 5600 16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK0J562S( ) 100 250 6800 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK0J682L 100 8200 12.5 40 3010 0.014 5000 0.8 5.0 EEUFK0J822L 100 16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK0J822( ) 100 250 18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK0J822S( ) 100 250 0 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK0J123S( ) 100 250 560 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1A561( ) 200 1000 820 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1A821L( ) 200 1000 10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1A821( ) 200 500 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1A122L( ) 200 1000 10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1A122( ) 200 500 1500 12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1A152S( ) 200 500 2700 3900 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1A182( ) 200 500 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1A182L( ) 200 500 10 30 2140 0.025 4000 0.6 5.0 EEUFK1A272L 100 12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1A272( ) 200 500 16 15 0.038 5000 0.8 7.5 7.5 EEUFK1A272S( ) 100 250 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1A392( ) 200 500 18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1A392S( ) 100 250 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1A472L 100 16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1A472S( ) 100 250 5600 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1A562L 100 6800 12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1A682L 100 16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1A682( ) 100 250 18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1A682S( ) 100 250 8200 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1A822S( ) 100 250

16 25 390 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1C391( ) 200 1000 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1C681L( ) 200 1000 680 10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1C681( ) 200 500 820 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1C821L( ) 200 1000 1000 10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1C102( ) 200 500 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1C122( ) 200 500 12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1C122S( ) 200 500 1500 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1C152L( ) 200 500 10 30 2140 0.025 4000 0.6 5.0 EEUFK1C222L 100 12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1C222( ) 200 500 16 15 0.038 5000 0.8 7.5 7.5 EEUFK1C222S( ) 100 250 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1C272( ) 200 500 2700 18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1C272S( ) 100 250 3300 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1C332L 100 3900 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1C392L 100 16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1C392S( ) 100 250 12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1C472L 100 18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1C472S( ) 100 250 5600 16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1C562( ) 100 250 6800 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1C682S( ) 100 250 270 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1E271( ) 200 1000 390 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1E391L( ) 200 1000 470 10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1E471( ) 200 500 560 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1E561L( ) 200 1000 10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1E561( ) 200 500 820 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1E821( ) 200 500 12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1E821S( ) 200 500 1000 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1E102L( ) 200 500 12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1E122( ) 200 500 1500 10 30 2140 0.025 4000 0.6 5.0 EEUFK1E152L 100 16 15 0.038 5000 0.8 7.5 7.5 EEUFK1E152S( ) 100 250 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1E182( ) 200 500 18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1E182S( ) 100 250 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1E222L 100 16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1E222S( ) 100 250 2700 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1E272L 100 3300 12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1E332L 100 16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1E332( ) 100 250 18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1E332S( ) 100 250 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1E472S( ) 100 250

35 180 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1V181( ) 200 1000 270 390 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1V271L( ) 200 1000 10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1V271( ) 200 500 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1V391L( ) 200 1000 10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1V391( ) 200 500 560 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1V561( ) 200 500 12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1V561S( ) 200 500 680 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1V681L( ) 200 500 820 12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1V821( ) 200 500 1000 10 30 2140 0.025 4000 0.6 5.0 EEUFK1V102L 100 16 15 0.038 5000 0.8 7.5 7.5 EEUFK1V102S( ) 100 250 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1V122( ) 200 500 18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1V122S( ) 100 250 1500 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1V152L 100 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1V182L 100 16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1V182S( ) 100 250 12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1V222L 100 16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1V222( ) 100 250 18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1V222S( ) 100 250 3300 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1V332S( ) 100 250