Radial Aluminium Electrolytic Capacitors 105 C
|
|
|
- Lydia Wiggins
- 5 years ago
- Views:
Transcription
![tolerance ±20%, other on request (at 20 C, 100Hz) Leakage current I ra I ra=0,0015 C R V R + 2µA or 5µA, whichever is greater, (I ra [µa], C R: Rated capacitance [µf], Dissipation factor (tan δ) Low](/docs-images/93/114469842/images/1-1.jpg "temperature characteristics Z max-factor Endurance Shelf life Surge voltage test V R: Rated voltage [V]) (at 20 C, 5 minutes) Rated voltage (V R) 6,3V 10V 16V 25V 35V 40V 50V 63V 100V tan δ max 0,25")
1 Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to µF range: Ø 5,5 x 12,0mm to Ø 16,5 x 36,5mm RoHS compliant Special types on request Specifications Characteristics Temperature range - 40 C to +105 C Rated voltage range 6,3V to 100V Capacitance tolerance ±20%, other on request (at 20 C, 100Hz) Leakage current I ra I ra=0,0015 C R V R + 2µA or 5µA, whichever is greater, (I ra [µa], C R: Rated capacitance [µf], Dissipation factor (tan δ) Low temperature characteristics Z max-factor Endurance Shelf life Surge voltage test V R: Rated voltage [V]) (at 20 C, 5 minutes) Rated voltage (V R) 6,3V 10V 16V 25V 35V 40V 50V 63V 100V tan δ max 0,25 0,20 0,16 0,14 0,12 0,12 0,10 0,08 0,07 (20 C,100Hz) When nominal capacitance exceeds 1.000µF, add 0,02 to the valve above for each 1.000µF increase Rated voltage (V R) 6,3V 10V 16V 25V 35V 40V 50V 63V 100V Z(-40 C)/(20 C) (100Hz) The following specifications shall be satisfied when the are restored to 20 C after the rated voltage is applied for hours to hours at 105 C. Capacitance tolerance C/C0 ±20% D.F. (tan δ) tan δ +200% of the initial specification value Leakage current (I ra) I ra the initial specified value The following specifications shall be satisfied when the are restored to 20 C after exposing them for hours at 105 C without voltage applied. Capacitance tolerance C/C0 ±20% D.F. (tan δ) tan δ +200% of the initial specification value Leakage current (I ra) I ra +200% of the initial specification value The shall be subjected to cycles each consisting of charging with the specified surge voltage for 30±5 seconds through a protective resistor (R=0,1/C R) and open-circuiting for 330 seconds at 105 C. The following specifications shall be satisfied when the are restored to 20 C. Rated voltage (V R) 6,3V 10V 16V 25V 35V 40V 50V 63V 100V Surge voltage (V S) 7,2V 11,5V 18,4V 28,8V 40,3V 46V 57,5V 72,5V 115V Appearance No significant damage Capacitance tolerance C/C0 ±10% D.F. (tan δ) tan δ the initial specified value Leakage current (I ra) I ra the initial specified value FROLYT Kondensatoren und Bauelemente GmbH ISO 9001 Tel.: Fax: Website: info@frolyt.de Home adress: Dammstraße 46 Germany Freiberg/ Saxony
2 Aluminium-electrolytic, miniaturized, Insulated, Polarized, Pulse proof, Endurance at least 1.000h to 2.500h at +105 C Generic specification: DIN EN Sectional specification: DIN EN without quality assessment Operating temperature range: - 40 C to +105 C Climatic category: 40/105/56 The identification of polarity is carried out by the stamp image. Taping specifications on request Capacitance range: ±20%, other on request Surge voltage test V S: V S = 1,15 V R Leakage current I ra: measured at V R at +20 C I ra 0,0015 C R V R + 2µA or 5µA (after 5 minutes, whichever is greater) C R: Rated capacitance (µf) V R: Rated voltage (V) ( ) Ø5,5 and Ø6,8 = L -0,5 (x) other wire length on request Dimensions (mm) D 5,5 6,8 8,7 10,0 12,5 16,5 d 1 wire Ø 0,6 0,6 0,6 0,6 0,8 (*) 0,8 e ±0,5 2,5 2,5 5,0 5,0 5,0 7,5 Endurance at least Ambient temperature Ø 6,8 mm Ø 8,7 mm Ø 10,0 mm +40 C h h h +85 C 4.000h 6.000h h +105 C 1.000h 1.500h 2.500h (*) 0,6 mm on request Dimensions Overview D x L Cap. Rated voltage V R [V] C R [µf] 6, ,47 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 1,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 1,5 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 2,2 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 3,3 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 4,7 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 10 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 15 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 22 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 8,7 x 12,7 33 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 6,8 x 12,5 8,7 x 12,7 10,0 x 12,7 47 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 6,8 x 12,5 8,7 x 12,7 8,7 x 12,7 10,0 x 21,0 68 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 8,7 x 12,7 8,7 x 12,7 8,7 x 12,7 10,0 x 12,7 10,0 x 21, ,5 x 12,0 5,5 x 12,0 6,8 x 12,5 6,8 x 12,5 8,7 x 12,7 8,7 x 12,7 8,7 x 12,7 10,0 x 12,7 12,5 x 21, ,5 x 12,0 6,8 x 12,5 6,8 x 12,5 6,8 x 12,5 8,7 x 12,7 8,7 x 12,7 10,0 x 12,7 10,0 x 16,5 12,5 x 21, ,8 x 12,5 6,8 x 12,5 8,7 x 12,7 8,7 x 12,7 10,0 x 12,7 10,0 x 16,5 10,0 x 16,5 10,0 x 21,0 16,5 x 26, ,7 x 12,7 8,7 x 12,7 10,0 x 12,7 10,0 x 12,7 10,0 x 16,5 10,0 x 21,0 10,0 x 21,0 12,5 x 21,0 16,5 x 26, ,7 x 12,7 8,7 x 12,7 10,0 x 12,7 10,0 x 16,5 10,0 x 21,0 12,5 x 21,0 12,5 x 21,0 12,5 x 25,0 16,5 x 36, ,7 x 12,7 10,0 x 12,7 10,0 x 16,5 10,0 x 21,0 12,5 x 21,0 12,5 x 21,0 12,5 x 25,0 16,5 x 26,0 16,5 x 36,
3 Dimensions Overview D x L Cap. Rated voltage V R [V] C R [µf] 6, ,0 x 16,5 10,0 x 16,5 10,0 x 21,0 12,5 x 21,0 12,5 x 25,0 16,5 x 22,0 16,5 x 26,0 16,5 x 30, ,0 x 16,5 10,0 x 21,0 12,5 x 21,0 12,5 x 25,0 16,5 x 22,0 16,5 x 26,0 16,5 x 26, ,5 x 21,0 12,5 x 21,0 12,5 x 25,0 16,5 x 26,0 16,5 x 30,0 16,5 x 36, ,5 x 25,0 12,5 x 25,0 16,5 x 26,0 16,5 x 30,0 16,5 x 36, ,5 x 22,0 16,5 x 26,0 16,5 x 30,0 16,5 x 36, ,5 x 26,0 16,5 x 30,0 16,5 x 36, ,5 x 36,5 16,5 x 36, ,5 x 36,5 Rated Rated cap. voltage C R [µf] V R [V] I~ [ma]* 100Hz +105 C tan δ ESR [Ω] Z [Ω] 10kHz 100Hz +20 C 100Hz +20 C +20 C - 40 C (max) (max) (max) (max) 6,8 6,3 5,5 x 12,0 0,25 58,51 36, , ,3 5,5 x 12,0 0,25 39,79 25,00 960, ,3 5,5 x 12,0 0,25 26,53 16,67 640, ,3 5,5 x 12,0 0,25 18,09 11,36 436, ,3 5,5 x 12,0 0,25 12,06 7,58 290, ,3 5,5 x 12,0 0,25 8,47 5,32 204, ,3 5,5 x 12,0 0,25 5,85 3,68 141, ,3 5,5 x 12,0 0,25 3,98 2,50 96, ,3 5,5 x 12,0 0,25 2,65 1,67 64, ,3 6,8 x 12,5 0,25 1,81 1,14 43, ,3 8,7 x 12,7 0,25 1,21 0,85 14, ,3 8,7 x 12,7 0,25 0,85 0,60 10, ,3 8,7 x 12,7 0,25 0,59 0,41 7, ,3 10,0 x 16,5 0,25 0,40 0,28 4, ,3 10,0 x 16,5 0,25 0,27 0,19 3, ,3 12,5 x 21,0 0,27 0,20 0,13 2, ,3 12,5 x 25,0 0,29 0,14 0,08 1, ,3 16,5 x 22,0 0,31 0,10 0,06 1, ,3 16,5 x 26,0 0,35 0,08 0,05 0, ,3 16,5 x 36,5 0,43 0,07 0,05 0, ,3 16,5 x 36,5 0,47 0,06 0,05 0, ,7 10 5,5 x 12,0 0,20 67,73 38, , ,8 10 5,5 x 12,0 0,20 46,81 26, , ,5 x 12,0 0,20 31,83 18,00 700, ,5 x 12,0 0,20 21,22 12,00 466, ,5 x 12,0 0,20 14,47 8,18 318, ,5 x 12,0 0,20 9,65 5,45 212, ,5 x 12,0 0,20 6,77 3,83 148, ,5 x 12,0 0,20 4,68 2,65 102, ,5 x 12,0 0,20 3,18 1,80 70, ,8 x 12,5 0,20 2,12 1,20 46, ,8 x 12,5 0,20 1,45 0,82 31, ,7 x 12,7 0,20 0,96 0,61 10, ,7 x 12,7 0,20 0,68 0,43 7, ,0 x 12,7 0,20 0,47 0,29 5, ,0 x 16,5 0,20 0,32 0,20 3, ,0 x 21,0 0,20 0,21 0,13 2, ,5 x 21,0 0,22 0,16 0,09 1, ,5 x 25,0 0,24 0,12 0,06 1, ,5 x 26,0 0,26 0,09 0,05 0, ,5 x 30,0 0,30 0,07 0,05 0, ,5 x 36,5 0,38 0,06 0,05 0, Diamentions (Diameter x Length) Ordering example: 220µF 25V, ±20%, 8,7 x 12,7mm, cut 4,5mm
4 Rated Rated tan δ ESR [Ω] Z [Ω] 10kHz I~ [ma]* cap. voltage 100Hz +20 C 100Hz +20 C +20 C - 40 C 100Hz C R [µf] V R [V] (max) (max) (max) (max) +105 C 3,3 16 5,5 x 12,0 0,16 77,17 43, , ,7 16 5,5 x 12,0 0,16 54,18 30,85 978, ,8 16 5,5 x 12,0 0,16 37,45 21,32 676, ,5 x 12,0 0,16 25,46 14,50 460, ,5 x 12,0 0,16 16,98 9,67 306, ,5 x 12,0 0,16 11,57 6,59 209, ,5 x 12,0 0,16 7,72 4,39 139, ,5 x 12,0 0,16 5,42 3,09 97, ,5 x 12,0 0,16 3,74 2,13 67, ,8 x 12,5 0,16 2,55 1,45 46, ,8 x 12,5 0,16 1,70 0,97 30, ,7 x 12,7 0,16 1,16 0,73 10, ,0 x 12,7 0,16 0,77 0,48 7, ,0 x 12,7 0,16 0,54 0,34 5, ,0 x 16,5 0,16 0,37 0,24 3, ,0 x 21,0 0,16 0,25 0,16 2, ,5 x 21,0 0,16 0,17 0,11 1, ,5 x 25,0 0,18 0,13 0,07 1, ,5 x 26,0 0,20 0,10 0,05 0, ,5 x 30,0 0,22 0,07 0,05 0, ,5 x 36,5 0,26 0,06 0,05 0, ,2 25 5,5 x 12,0 0,14 101,28 45, , ,3 25 5,5 x 12,0 0,14 67,52 30,30 757, ,7 25 5,5 x 12,0 0,14 47,41 21,28 531, ,8 25 5,5 x 12,0 0,14 32,77 14,71 367, ,5 x 12,0 0,14 22,28 10,00 250, ,5 x 12,0 0,14 14,85 6,67 166, ,5 x 12,0 0,14 10,13 4,55 113, ,5 x 12,0 0,14 6,75 3,03 75, ,5 x 12,0 0,14 4,74 2,13 53, ,8 x 12,5 0,14 3,28 1,47 36, ,8 x 12,5 0,14 2,23 1,00 25, ,8 x 12,5 0,14 1,49 0,67 16, ,7 x 12,7 0,14 1,01 0,50 5, ,0 x 12,7 0,14 0,68 0,33 3, ,0 x 16,5 0,14 0,47 0,23 2, ,0 x 21,0 0,14 0,33 0,16 1, ,5 x 21,0 0,14 0,22 0,11 1, ,5 x 25,0 0,14 0,15 0,07 0, ,5 x 26,0 0,16 0,12 0,05 0, ,5 x 30,0 0,18 0,09 0,05 0, ,5 x 36,5 0,20 0,07 0,05 0, Diamentions (Diameter x Length) Ordering example: 220µF 25V, ±20%, 8,7 x 12,7mm, cut 4,5mm
5 Rated Rated tan δ ESR [Ω] Z [Ω] 10kHz I~ [ma]* cap. voltage 100Hz +20 C 100Hz +20 C +20 C - 40 C 100Hz C R [µf] V R [V] (max) (max) (max) (max) +105 C 1,5 35 5,5 x 12,0 0,12 127,32 56, , ,2 35 5,5 x 12,0 0,12 86,81 38,64 772, ,3 35 5,5 x 12,0 0,12 57,87 25,76 515, ,7 35 5,5 x 12,0 0,12 40,64 18,09 361, ,8 35 5,5 x 12,0 0,12 28,09 12,50 250, ,5 x 12,0 0,12 19,10 8,50 170, ,5 x 12,0 0,12 12,73 5,67 113, ,5 x 12,0 0,12 8,68 3,86 77, ,5 x 12,0 0,12 5,79 2,58 51, ,8 x 12,5 0,12 4,06 1,81 36, ,7 x 12,7 0,12 2,81 1,40 16, ,7 x 12,7 0,12 1,91 0,95 11, ,7 x 12,7 0,12 1,27 0,63 7, ,0 x 12,7 0,12 0,87 0,43 5, ,0 x 16,5 0,12 0,58 0,29 3, ,0 x 21,0 0,12 0,41 0,20 2, ,5 x 21,0 0,12 0,28 0,14 1, ,5 x 25,0 0,12 0,19 0,10 1, ,5 x 22,0 0,12 0,13 0,06 0, ,5 x 30,0 0,14 0,10 0,05 0, ,5 x 36,5 0,16 0,08 0,05 0, ,0 40 5,5 x 12,0 0,12 190,99 75, , ,5 40 5,5 x 12,0 0,12 127,32 50, , ,2 40 5,5 x 12,0 0,12 86,81 34,09 681, ,3 40 5,5 x 12,0 0,12 57,87 22,73 454, ,7 40 5,5 x 12,0 0,12 40,64 15,96 319, ,8 40 5,5 x 12,0 0,12 28,09 11,03 220, ,5 x 12,0 0,12 19,10 7,50 150, ,5 x 12,0 0,12 12,73 5,00 100, ,5 x 12,0 0,12 8,68 3,41 68, ,8 x 12,5 0,12 5,79 2,27 45, ,8 x 12,5 0,12 4,06 1,60 31, ,7 x 12,7 0,12 2,81 1,32 14, ,7 x 12,7 0,12 1,91 0,90 10, ,7 x 12,7 0,12 1,27 0,60 6, ,0 x 16,5 0,12 0,87 0,41 4, ,0 x 21,0 0,12 0,58 0,27 3, ,5 x 21,0 0,12 0,41 0,19 2, ,5 x 21,0 0,12 0,28 0,13 1, ,5 x 22,0 0,12 0,19 0,09 1, ,5 x 26,0 0,12 0,13 0,06 0, ,5 x 36,5 0,14 0,10 0,05 0, Diamentions (Diameter x Length) Ordering example: 220µF 25V, ±20%, 8,7 x 12,7mm, cut 4,5mm
6 Rated Rated tan δ ESR [Ω] Z [Ω] 10kHz I~ [ma]* cap. voltage 100Hz +20 C 100Hz +20 C +20 C - 40 C 100Hz C R [µf] V R [V] (max) (max) (max) (max) +105 C 0, ,5 x 12,0 0,10 338,63 138, , ,0 50 5,5 x 12,0 0,10 159,15 65, , ,5 50 5,5 x 12,0 0,10 106,10 43,33 866, ,2 50 5,5 x 12,0 0,10 72,34 29,55 590, ,3 50 5,5 x 12,0 0,10 48,23 19,70 393, ,7 50 5,5 x 12,0 0,10 33,86 13,83 276, ,8 50 5,5 x 12,0 0,10 23,41 9,56 191, ,5 x 12,0 0,10 15,92 6,50 130, ,5 x 12,0 0,10 10,61 4,33 86, ,5 x 12,0 0,10 7,23 2,95 59, ,8 x 12,5 0,10 4,82 1,97 39, ,7 x 12,7 0,10 3,39 1,70 17, ,7 x 12,7 0,10 2,34 1,18 11, ,7 x 12,7 0,10 1,59 0,80 8, ,0 x 12,7 0,10 1,06 0,53 5, ,0 x 16,5 0,10 0,72 0,36 3, ,0 x 21,0 0,10 0,48 0,24 2, ,5 x 21,0 0,10 0,34 0,17 1, ,5 x 25,0 0,10 0,23 0,12 1, ,5 x 26,0 0,10 0,16 0,08 0, ,5 x 26,0 0,10 0,11 0,05 0, , ,5 x 12,0 0,08 270,90 127, , ,0 63 5,5 x 12,0 0,08 127,32 60,00 900, ,5 63 5,5 x 12,0 0,08 84,88 40,00 600, ,2 63 5,5 x 12,0 0,08 57,87 27,27 409, ,3 63 5,5 x 12,0 0,08 38,58 18,18 272, ,7 63 5,5 x 12,0 0,08 27,09 12,77 191, ,8 63 5,5 x 12,0 0,08 18,72 8,82 132, ,5 x 12,0 0,08 12,73 6,00 90, ,5 x 12,0 0,08 8,49 4,00 60, ,8 x 12,5 0,08 5,79 2,73 40, ,7 x 12,7 0,08 3,86 2,42 16, ,7 x 12,7 0,08 2,71 1,70 11, ,0 x 12,7 0,08 1,87 1,18 8, ,0 x 12,7 0,08 1,27 0,80 5, ,0 x 16,5 0,08 0,85 0,53 3, ,0 x 21,0 0,08 0,58 0,36 2, ,5 x 21,0 0,08 0,39 0,24 1, ,5 x 25,0 0,08 0,27 0,17 1, ,5 x 26,0 0,08 0,19 0,12 0, ,5 x 36,5 0,08 0,13 0,08 0, , ,5 x 12,0 0,07 237,04 85, , , ,5 x 12,0 0,07 111,41 40,00 500, , ,5 x 12,0 0,07 74,27 26,67 333, , ,5 x 12,0 0,07 50,64 18,18 227, , ,5 x 12,0 0,07 33,76 12,12 151, , ,5 x 12,0 0,07 23,70 8,51 106, , ,5 x 12,0 0,07 16,38 5,88 73, ,8 x 12,5 0,07 11,14 4,00 50, ,8 x 12,5 0,07 7,43 2,67 33, ,7 x 12,7 0,07 5,06 1,82 22, ,0 x 12,7 0,07 3,38 1,21 15, ,0 x 21,0 0,07 2,37 0,85 10, ,0 x 21,0 0,07 1,64 0,59 7, ,5 x 21,0 0,07 1,11 0,40 5, ,5 x 21,0 0,07 0,74 0,27 3, ,5 x 26,0 0,07 0,51 0,18 2, ,5 x 26,0 0,07 0,34 0,12 1, ,5 x 36,5 0,07 0,24 0,09 1, ,5 x 36,5 0,07 0,16 0,06 0, Dimensions (Diameter x Lenght) Ordering example: 220µF 25V, ±20%, 8,7 x 12,7mm, cut 4,5mm All information provided in printed form needs for her legal obligation for the purposes of 463 and 480 II Civil Code of the explicit written confirmation. Hence, the given data imply exclusively a product description and are not to be understood as assured qualities
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
DATA SHEET. 152 RMH Aluminum electrolytic capacitors Radial Miniature, High voltage. BCcomponents
DATA SHEET Supersedes data of 18th January 2000 File under BCcomponents, BC01 2000 Apr 07 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case,
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
handbook, halfpage lower RLL 116
FEATURES Polarized aluminium electrolytic capacitors, non-solid Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful
Summary of Specifications
Miniature General Purpose Solvent Proof Large and Small 85 C Temperature Actual Size The series capacitors are a miniaturized version of the SME series. These capacitors are designed for a load life of,000
Radial Type Aluminium Electrolytic Capacitors
SH Radial Type Aluminium Electrolytic acitors Endurance: 105 2000hours SH Recommended Applications :For high quality, reliability application, high CV product High Temperature Corresponding product to
Aluminum Electrolytic Capacitor JNK
FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~
Summary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
KMG Series. Miniature General Purpose Solvent Proof 105 C Maximum Temperature
Miniature General Purpose Solvent Proof 5 C Temperature The series capacitors are designed for general purpose use with an operating temperature range for most of these capacitors from 55 C to 5 C. The
SMM SERIES Engineering Bulletin Mar 07
Series SERIES Snap Mount Downsize High Long Life RoHS Compliant 85 C Maximum Temperature The series is a high voltage, long life snap-in capacitor series that offers downsized versions of the SMH series.
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue
Aluminum Capacitors Power High Ripple Current Screw Terminals
101/102 PHR-ST Aluminum Capacitors FEATURES ST STB Fig.1 Component outline Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue
handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C
FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case
Snap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
Aluminum Electrolytic Capacitors Radial Very Low Impedance
Aluminum Electrolytic Capacitors Radial Very Low Impedance FEATURES Very low impedance and low ESR Very long useful life: 4000 h to 0 000 h at 05 C, very high reliability Excellent ripple current capability
Performance Characteristics -40 to +85 (160Vdc~450Vdc) -25 to +85 (500Vdc~630Vdc) 160 to 630 V DC Working Voltage(VDC) 160~ ~550
Standard capacitors Applications Frequency converters Uninterruptible power supplies All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatible Specifications
Low ESR and High Frequency Radial Electrolytic Capacitor. TZE Series. Features. Applications. Dimensions (in mm)
Low ESR and High Frequency Radial Electrolytic Capacitor Low ESR and High Frequency Radial Electrolytic Capacitor Features Radial leads, cylindrical aluminum case Low impedance and high frequency High
Miniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
FEATURES. SMD Style. Reflow soldering. Lead (Pb)-free APPLICATIONS. U R (V) x 5.8
ECV Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors SMD Style Miniature dimension Pb-free Available RoHS* COMPLIANT Extended temperature range: 105 C QUICK REFERENCE DATA DESCRIPTION
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
Aluminum Capacitors Power Ultra Long Life Snap-In
059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),
Aluminum Capacitors Power High Ripple Current Snap-In
Aluminum Capacitors 198 PHR-SI 057 PSM-SI smaller dimensions Fig. 1 Component outlines 198 PHR-SI QUICK REFERENCE DATA longer life higher ripple 157 PUM-SI DESCRIPTION VALUE Nominal case size (Ø D x L
Type 381LX / 383LX 105 C High Ripple, Snap-In Aluminum High Ripple, Long Life, 2, 4 and 5 pin styles available
High Ripple, Long Life, 2, 4 and 5 pin styles available Specifications Temperature Range Rated Voltage Range Adding longer-life and more ripple capability to the excellent value of Type 380L/LX capacitors,
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc.
S YD286 Series High frequency,low edance 105, 2000 hours Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc. Specifications: Item Characteristics Rated Voltage Range: 6.3V ~100VDC
K05 TYPE -40 C +105 C 5000H
K05 TYPE -40 C +105 C 5000H Surge-proof capacitor in aluminium can with insulation sleeve Safety vent at bottom case or aside case. Snap in terminals for PCB mounting. Very high CV for unit volume with
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
Aluminum Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION WIDE TEMPERATURE -55 ~ +105 O C DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage
Snap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options
TS-HC Series 105 C, 2000 hours Long life with high capacitance (30% smaller than HB series) 2 and 3 pin versions available RoHS compliant PVC and RoHS compliant PET sleeve options RoHS Compliant Rated
Type 381LQ 105 ºC Compact, High Ripple, Snap-In Aluminum Higher Capacitance per Case Size
Type 381LQ is on average 23% smaller and more than 5 mm shorter than Type 381LX. This is achieved with a new can closure method that permits installing capacitor elements into smaller cans. Approaching
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20
from KMQ series Endurance with ripple : 2,000 to 3,000 hours at 105 Non solvent resistant type RoHS Compliant LXS P246 KMS P225 Downsized LXQ P249 KMM KMQ P215 SPECIFICATIONS Items Category Temperature
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Useful life: up to 2000 h at 105 C Very low ESR and high ripple current High voltages up to 100 V AEC-Q200 qualified products on
Electrolytic Capacitors
Electrolytic Capacitors WWW.FTCAP.DE // Electrolytic Capacitors Aluminum Electrolytic Capacitors Series Design Application Page A Axial leaded, 85 C 9 Series Design Application Page SIG Snap-in, 125 C
ESC Aluminum Electrolytic Capacitors
H Description S Capacitors for high frequency applications. H Applications S Computers switching regulator mother board output. H Features S Case with D 6.0 mm has the safety vent at the bottom. H Diagram
LPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
-40 to C 6.3 to 50 V.DC 22 to 6800 µ F ±20 % (120Hz/+20 C) I < 0.01 CV (µa) after 2 minutes application of rated working voltage at +20 C
Radial Type Series: FM Type :A n Features Low impedance(40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105 C Country of Origin Japan Malaysia China n s Category temp. range Rated W.V.
Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In
Aluminum Electrolytic Capacitors Power Miniaturized Economy Long Life Snap-In FEATURES Useful life: 2000 h at 105 C Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, miniaturized
Summary of Specifications
Series Large Can Screw Terminals High Ripple 6.3 to 400VDC Range Dimensions in Inches RoHS Compliant 105 C Maximum Temperature The series allows for extremely high ripple currents for applications such
Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
U36D SERIES Engineering Bulletin Mar 07
Series SERIES Large Can Screw Terminals High Ripple Up to 550VDC Dimensions in Inches RoHS Compliant 85 C Maximum Temperature The series is ideal for inverter applications requiring high ripple current
Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum
The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 158 PUL-SI 090 miniaturized 85 C PUL-SI Fig. 1 156 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 22 x 25
Large Can Aluminum Electrolytic Capacitors
FEATURES LONG LIFE AT +105 C (2,000 ~ 3,000 HOURS) HIGH RIPPLE CURRENT HIGH VOLTAGE (UP TO 500VDC) SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS *See System for Details Operating Temperature Range
Summary of Specifications
Series Large Can Screw Terminal 85 C General Purpose High Ripple Current Capability Extended Range to 550VDC Dimensions in Inches The series is ideal for inverter applications requiring high ripple current
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 057 PSM-SI smaller dimensions 159 PUL-SI 105 C 157 PUM-SI Fig. 1 longer life higher ripple 198 PHR-SI QUICK REFERENCE DATA DESCRIPTION VALUE
Data Sheet. Aluminum electrolytic capacitors Alu-X product lines. Single-ended capacitors. Date: August 2008
Aluminum electrolytic capacitors Alu-X product lines Single-ended capacitors Series/Type: Data Sheet Date: August 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication and
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 059 PLL-SI 159 miniaturized 85 C PUL-SI Fig. 1 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 22 x 25
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
Type 381EL 105 ºC Ultra-Long Life Snap-In, Aluminum More than 100,000 Hours Operation at 65 C and Rated 105 C Ripple OBSOLETE
Specifications Temperature Range Rated Voltage Range 160 to 450 Vdc Capacitance Range 39 µf to 2,200 µf ± 20% Capacitance Tolerance ± 20% Leakage Current Ripple Current Multipliers The new 381EL extends
ALS30 Series 85 C. RoHS. Compliant
ALS30 Series Compact size Long life, 20000 hours at (Ur, Ir applied High ripple current Excellent surge voltage capability Optimized designs available on request RoHS Compliant application Basic design
ALS30. ALS31 Stud Mounting
25 This range offers high CV per unit volume coupled with high ripple currents and long life performance. They are also capable of handling high peak voltages and currents. Capacitance range... 68µF to
ALS40. ALS41 Stud Mounting
31 This range offers high CV per unit volume coupled with high ripple currents and long life performance at 105 C. They are also capable of handling high peak voltages and currents. Capacitance range...
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
SIG Snap-in, 125 C 65 GSH GSG LFH. MDK Motor start 105. MEK Motor start 107. E-Type Flash capacitors 109
Series Design Application Page Series Design Application Page A Axial leaded, 85 C 9 SIG Snap-in, 125 C 65 AH Axial leaded, 105 C 13 GS DIN terminals, 85 C 69 AG Axial leaded, 125 C 17 GSH DIN terminals,
Size code Rated W.V. Cap. change. 4 W.V to 50 W.V. 6.3 W.V > 10 W.V 1000 hours ±20 % < 200 % initial specifi ed value
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant s Category Temp. Range 40 C to +85 C
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. I=0.01CV or 3(uA) after 2 minutes with rated working voltage
series +105,High ( ), Low ( ) FEATURES Load life:105 2000 ~4000hours Enabled high ripple current by a reduction of ESR at high frequency range switching power supply SPECIFICATIONS s Characteristics Category
Technical Support: Voltage Capacitance Alternate Suggested Replacement Part Numbers NPC101M2D5ZATRF 2VDC 100uF
www.niccomp.com/pcn Technical Support: tpmg@niccomp.com October 28 th 2016 SUB: EOL End of Life Notification Products impacted by this notice: NPC Series SMT Solid Polymer Aluminum Electrolytic Capacitors
6.3 W.V < D(06.3) Miniature > 10 W.V 1000 hours ±20 %
Surface Mount Type Series: S Type: V Features Endurance: 85 C 2000 h Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualifi ed RoHS directive compliant s Category Temp.
Resin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes
FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes APPLICATIONS Handheld electronics USB accessories LEAD-FREE COMPATI- BLE COMPONENT CASE DIMENSIONS: millimeters (inches)
Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)
FEATURES The world s smallest surface mount tantalum capacitor CV range: 0.10-150μF / 2-25V 11 case sizes available, standard and low profile APPLICATIONS Hearing Aids, Non-life support medical, Long life
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR 1 Application Guidelines 1. Polarity CSCAP is solid aluminum electrolytic capacitors with positive and negative electrodes. Do not reverse the polarity when
W.V. (V) tan δ For capacitance value > 1000 µf, add 0.02 per every 1000 µf.
Radial Lead Type Series: FC Type: A Features Endurance : 105 C h to 5000 h Low impedance RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C Rated Range 6.3 V.DC to 100 V.DC Nominal
part of the EVOX RIFA GROUP
part of the EVOX RIFA GROUP 17 series Listed here are only samples of the range of Screw Terminal Capacitors we can produce. Electrical characteristics and case size are just two parameters that can be
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : FC Type : A Features : 105 C h to 5000 h ow impedance RoHS compliant Specifications Category temperature range 55 C to +105 C Rated voltage range 6.3 V.DC to 100 V.DC Capacitance
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : M Type : A Features Smaller than series SU RoHS compliant Specifications Category temperature range 40 C to + 85 C 25 C to +85 C range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
PEG C and 105 C
125 C and 105 C 125 C and 105 C Long life > 30 years at 50 C Low ESR Low ESL RoHS Compliant application Basic design Smoothing, coupling/decoupling and energy storage in telecommunication, power supply
Vishay Roederstein Aluminium Electrolytic Capacitors, Radial Style FEATURES. High C U product APPLICATIONS. elements
Aluminium Electrolytic Capacitors, Radial Style FEATURES Polarised AI electrolytic capacitor High C U product Small dimensions APPLICATIONS General uses, industrial electronics, automotive electronics,
Frequency (Hz) 50, k 10 k to Correction factor min. 3 min.
Radial Lead Type Series: M Type: A Features Smaller than series SU RoHS directive compliant Specifi cations Category Temp. Range 40 C to + 85 C 25 C to +85 C Rated Range 6.3 V.DC to 100 V.DC 160 V.DC to
MIL-PRF Series. Military Conventional Wet Tantalum OUTLINE DIMENSIONS. CASE DIMENSIONS: millimeters (inches)
This data sheet contains the MIL-PRF-39006 ratings for which AVX is a qualified approved supplier. This will be continually updated as the qualification expands. For COTS-Plus equivalent ratings please
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING AVAILALE ITH ANTI-VIRATION IDE TERMINATIONS VERY LO IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz EXTENDED LOAD LIFE (2,000 ~ 5,000 HOURS @ +105
PPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
Film Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
Applications. Rated Voltage (VDC) 160 = = = = = = = = = = = 100
Single-Ended Aluminum Electrolytic Capacitors ESL +105 C Overview Applications KEMET s ESL aluminum electrolytic single-ended capacitors are designed for high reliability and long life (up to 10,000 hours)
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifcations Type CGS screw terminal, aluminum electrolytic capacitors have a high CV rating and are suitable for use in most demanding applications requiring high current
Applications. Rated Voltage (VDC) 100 = = = = = = = = 500
Single-Ended Aluminum Electrolytic Capacitors ESK Series, +85 C Overview Applications KEMET s ESK Series of single-ended aluminum electrolytic capacitors are designed for high-density printed circuit boards
Applications. Rated Voltage (VDC) 100 = = = = = = = = 500
Single-Ended Aluminum Electrolytic Capacitors ESK Series, +85ºC Overview Applications KEMET s ESK Series of single-ended aluminum electrolytic capacitors are designed for high-density printed circuit boards
Applications. Capacitance Code Version. The last two digits represent significant figures. The first digit indicates the total number digits.
Axial Aluminum Electrolytic Capacitors PEG124, +105 C and +125 C Overview Applications KEMET's PEG124 is an electrolytic capacitor with very longlife and outstanding electrical performance. The device
Tantalum Chip Capacitors
FEATURES EXPANDED VALUE RANGE & REDUCED CASE SIZES MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE ELEVEN CASE SIZES (J, P, A2, A, B2, B, C2, C, V, D AND E) BOTH FLOW AND REFLOW SOLDERING APPLICABLE
Applications. Rated Voltage (VDC) 160 = = = = = = = = 500
Single-Ended Aluminum Electrolytic Capacitors ESH Series, +105ºC Overview Applications KEMET s ESH Series of single-ended aluminum electrolytic capacitors offer high CV and are designed for high quality,
Applications. Rated Voltage (VDC) 160 = = = = = = = = 500
Single-Ended Aluminum Electrolytic Capacitors ESH, +105 C Overview Applications The KEMET ESH single-ended aluminum electrolytic capacitors offer high CV and are designed for high quality, high reliability
STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.
L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V
Summary of Specifications
Large an Screw erminals Longer Life U36 Grade High Ripple 350 to 500VD Ratings RoHS ompliant 85 Maximum emperature he series is a longer life version of the industry standard U36D specifically designed
TMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
PERFORMANCE SPECIFICATION SHEET
INCHPOUND MILPRF39006/31D 21 March 2018 SUPERSEDING MILPRF39006/31C 21 April 2011 PERFORMANCE SPECIFICATION SHEET CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG),
YAGEO Corporation Date: 01/17/2007
YAGEO Corporation Date: 01/17/2007 Aluminum Electrolytic Capacitors File:2063 Engineering Bulletin for SC Type Page: 1/7 SC Type -40 to +105 C Very low impedance and ESR, miniature aluminum electrolytic
Failure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
Aluminum Capacitors Radial Style
FEATURES Polarized Aluminum electrolytic capacitor High C x U product Small dimensions Compliant to RoHS directive 2002/95/EC Component outlines. Obsolete - please refer to: www.vishay.com/doc?25014 APPLICATIONS
Product Specification
Product Specification NUMBER TDD SERIES HYBRID CAPACITOR ISSUE 01 REVISION I ECO 15-051 DATE 10/2/2015 1.0 Scope This document contains specific electrical, mechanical, and environmental requirements and
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60384-24-1 First edition 2006-06 Fixed capacitors for use in electronic equipment Part 24-1: Blank detail specification Surface mount fixed tantalum electrolytic capacitors with
CapXon LD Series LD Series H Features Updated Series Preliminary Data Sheet Standard capacitors
Updated Series Preliminary Data Sheet 85 5000H Features Standard capacitors Applications Switch-mode power supplies in industrial and entertainmentelectronics Uninterruptible power supplies Features High