Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches

8

Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud Selection Guide 13, 14, 18 Special Shape Punches 15 17 Keyway Punch 17 Manual operated Punch Kits 19 Hydraulic Punch Drivers, Assembly Paste 20, 22 Battery Powered Punch Driver LS 60 Plus 21 Hydraulic Pumps 23 Hydraulic Oil 23 Hydraulic Hoses 23 C-Frame Punch Driver 24 DIN Rail Cutter and Punch 25 Hole Saws HSS Bi-Metal Hole Saws and Sets 26-28 Arbors 28 Carbide Tipped Hole Cutters Kwik Change 29 Carbide Tipped Hole Cutters 30 Cutting Oil 31 Step Bits Kwik Stepper Step Bits 31, 32 Kombi Bits 32 9

Knockout Punches Round Standard Metal Knockout Punch Units These are complete units consisting of punch, die and draw stud. Operate manually using wrench to turn the threaded draw stud into the mating threads of the punch. This draws the punch into the die, shearing a hole into the material being punched. Can also be operated with hydraulic punch drivers (only punch and die needed; draw stud is part of the driver set). The ball bearing draw stud minimises working force considerably. Available separately or in sets. Hole Size Capacity Punch Unit Individual Parts for Manual Operation Draw Stud + Accessories for Hyd. Units Mild Steel Actual Norm size (ST 37) Draw Stud Draw Stud Adapter with Ball Bearing 34291/(7804E) 15906/(7646) Sleeve mm Pg ISO mm Punch Die Ball Bearing Nut Spacer 34299/(7904E) 25097/(7625) LS 60 Plus 19.0/28.6 66.7 3.0 21214 04252 06997 04188 04187 03294 03294 69.9 3.0 25361 04247 04246 04188 04187 03294 03294 70.6 3.0 25383 02445 02443 04042 03294 03294 74.0 3.0 19975 04175 04177 04188 04187 03294 03294 76.2 3.0 25372 04259 04258 04188 04187 03294 03294 79.4 3.0 25403 06363 06362 04188 04187 03294 03294 82.0 3.0 18635 18905 18906 04188 04187 03294 03294 89.8 3.0 19976 04180 04183 04188 04187 03294 03294 95.3 3.0 21216 05265 05266 04188 04187 03294 03294 102.7 3.0 19977 04653 04652 04679 04685 04686 03294 03170 115.4 3.0 19978 04655 04654 04679 04685 04686 03294 03170 120.0 3.0 21519 21489 21491 04679 04685 04686 03294 03170 143.7 3.0 19980 05447 05448 04679 04685 04686 03294 03170 Round Standard Punches are only available from 66.7 143.7 mm diameter. Should you require smaller dimensions please refer to Slug Buster Punches. Knockout Punches SLUG-BUSTER Knockout Punches The unique punch profile splits slugs allowing slugs to fall free. Slug-Buster punches are available in 23 different sizes. Operation: Manually (with wrench or ratchet) or with hydraulic driver. The ball bearing draw stud minimises working force considerably. *) 04218 Non-ball bearing draw stud We recommend to lubricate the draw studs. Please use Greenlee paste No. 11547 on page 22. Draw Stud Selection Guide on page 13. 10 Hole Size Capacity Punch Unit Individual Parts for Manual Operation Draw Stud for Hyd. Units Mild Steel Actual Norm size (ST 37) Draw Stud LS 60 Plus with 34291/(7804E) 15906/(7646) mm Pg ISO mm Punch Die Ball Bearing 34299/(7904E) 25097/(7625) 12.5 Pg 7 ISO 12 1.5 06727 06728 06729 04218* 15.2 Pg 9 2.0 31989 31969 32002 00042 30043 30043 16.2 ISO 16 2.0 35177 35163 35162 00042 30043 30043 18.6 Pg 11 2.0 31990 31970 32003 00042 30043 30043 20.4 Pg 13 ISO 20 2.0 31991 31971 32004 00042 30043 30043 22.5 Pg 16 2.0 31962 31756 14722 00042 30043 30043 25.4 ISO 25 2.0 35178 35165 35164 04040 30043 30043 28.3 Pg 21 3.0 31963 31757 06972 04040 31872 03294 28.3 Pg 21 2.0 31993 31973 32006 00042 30043 30043 30.5 2.0 36508 36284 36279 00042 30043 30043 30.5 3.0 60246 60237 36278 04040 31872 03294 32.5 ISO 32 3.0 35179 35169 35168 04040 31872 03294 34.6 3.0 31964 31758 04011 04040 31872 03294 37.0 Pg 29 3.0 31995 31975 32008 04040 31872 03294 40.5 ISO 40 3.0 35180 35158 35159 04040 31872 03294 43.2 3.0 31965 31759 04013 04040 31872 03294 47.0 Pg 36 3.0 31996 31976 32009 04042 31872 03294 49.6 3.0 31966 31760 04061 04042 31872 03294 50.8 ISO 50 3.0 35181 35160 35161 04042 31872 03294 54.0 Pg 42 3.0 36171 36172 36173 04042 31872 03294 60.0 Pg 48 3.0 31998 31978 32011 04042 31872 03294 61.5 3.0 31967 31761 04063 04042 31872 03294 64.0 ISO 63 3.0 35182 35167 35166 04042 31872 03294

Punch Kits for Hydraulic Drivers Punch Kits for Hydraulic Drivers Including punch and die. Draw studs are already included in Hydraulic Driver sets. For use with Quick Draw 7804E (34291), Quick Draw 7904E (34299), Hydraulic Punch Sets 15906 and 25097 and LS 60 Plus. Slug Buster Punch Set 35617 including 5 sizes punches and dies ISO 16, 20, 25, 32 und 40 Slug Buster Punch Set 06892 including 7 sizes punches and dies ISO 16, 20, 25, 32, 40, 50 und 63 Slug Buster Set 32398 including 6 sizes punches and dies Pg 9, 11, 13, 16, 21 und 30.5 mm Slug Buster Punch Set 32803 including 9 sizes punches and dies Pg 9, 11, 13, 16, 21, 29, 36, 48 und 30.5 mm All sets are supplied in cardboard boxes. Plastic Carrying Case 76681 for above sets 11

SLUG-SPLITTER Knockout Punches (Inox) Slug-Splitter heavy-duty punches are designed to punch up to 3.5 mm stainless steel, mild steel, fibreglass and plastic enclosures. Their unique slug splitting design requires only minimum sized pilot holes. Pilot holes just 0.1 through 0.2 mm bigger than the draw stud ensure exact centering of the punch. Splitted slugs easily fall free and cannot cling to draw stud. Operate with hydraulic driver only. Stainless steel draw studs are used for longer life. Available in 20 different sizes. Hole Size Capacity Punch Unit Individual Parts Draw stud Stainless steel for Hyd. Units Actual Norm size LS 60 Plus 15906/(7646) 25097/(7625) 34291/(7804E) mm Pg ISO mm* (Punch+Die) Punch Die 34299/(7904E) 15.2 Pg 9 2.5 06951 31117 31126 29451 16.2 ISO 16 2.5 06952 04599 04598 29451 18.6 Pg 11 2.5 06953 31119 31128 29451 20.4 Pg 13 ISO 20 2.5 06954 31120 31129 29451 22.5 Pg 16 3.5 06955 28154 28155 29451 25.4 ISO 25 3.5 06956 04602 04601 29451 28.3 Pg 21 3.5 06957 28156 28157 29452 30.5 3.5 06958 36490 36489 29452 32.5 ISO 32 3.5 06959 04605 04603 29452 34.6 3.5 28158 28159 29452 37.0 Pg 29 3.5 06960 31122 31135 29452 40.5 ISO 40 3.5 06961 04608 04607 29452 43.2 3.5 28160 28161 29452 47.0 Pg 36 3.5 06962 31123 31131 29452 49.6 3.5 28162 28163 29452 50.8 ISO 50 3.5 06963 04611 04609 29452 54.0 Pg 42 3.5 06964 31124 31132 29452 60.0 Pg 48 3.5 06965 31125 31133 29452 61.5 3.5 28165 28166 29452 64.0 ISO 63 3.5 06966 04614 04613 29452 *) Depending on hydraulic punch driver Slug-Splitter ISO Punch Kits (INOX) in sturdy plastic case For use with Quick Draw 7804E (34291), Quick Draw 7904E(34299, Hydraulic Punch Sets 15096 and 25097 and LS60Plus In plastic carrying case 76681 ISO-Slug-Splitter Punch Kit 76680 for stainless steel, including one each ISO 16, 20, 25, 32, 40 punch/die, draw studs 29451 and 29452 ISO-Slug-Splitter Punch Kit 76679 for stainless steel, including one each ISO 16, 20, 25, 32, 40, 50 and 63 punch/die, draw studs 29451 and 29452 Plastic Carrying Case 76681 We recommend to lubricate the draw studs. Please use Greenlee paste No. 11547 on page 22. = Artikel-Nr. 12

Replacement Draw Stud Selection Guide If you need to replace a broken draw stud, refer to the full scale pictures and information below when ordering a replacement draw stud. Sizes given diameter x length. Subject to tolerance variations. Replacement Draw Studs for Manual Drivers 04042 19.0 x 75 mm 00042 9.5 x 40 mm 04040 19.0 x 55 mm 04218 6.4 x 35 mm 04679 28.6 x 190 mm We recommend to lubricate the draw studs. Please use Greenlee paste No. 11547 on page 22. 04188 19.0 x 140 mm 13

Replacement Draw Studs for Hydraulic Drivers Ordering Information for Hydraulic Driver Draw Studs 30043 31872 03294 29451 29452 03170 Adapter sleeve for standard punches 102.7 to 143.7 mm 7804 7904 7646 7625 LS 60 Plus 30043 9.5 x 71 mm 31872 19.0 x 105 mm 03294 19 x 135 mm Internal thread 9.5 mm 29451 11.1 x 108 mm for Slug Splitter punches. 29452 19.0 x 140 mm for Slug Splitter punches 03170 28.6 x 76 mm Adapter 33967 19 x 48 mm (inside 9.5 mm) 60114 19 x 48 mm (inside 6.3 mm) 60167 19 x 48 mm (inside 12.7 mm) 14 We recommend to lubricate the draw studs. Please use Greenlee paste No. 11547 on page 22.

Knockout Punches Special Shape Punches Use to punch holes for switches and instruments in enclosures. Accurate alignment ensures burr-free and exact holes. Punch up to 3.0 mm mild steel and up to 1.5 mm stainless steel. Punching stainless steel reduces lifetime of punches. Punching stainless steel requires Hydraulic Punch Drivers. RECTANGULAR PUNCHES and Individual Parts Counter Nut Punch Die Draw Stud Ball Bearing Driver Nut Hole Size Maximum Operation Punch Individual Parts Pilot Optional Capacity Type Unit Hole Ø Adapter for Mild Steel Ball Bearing Conter Hydraulic mm (ST 37) mm Punch Die Draw Stud Nut Nut mm Drivers 11.1 x 22.2 1.5 Hand/Hydr. 60025 60026 60027 60115 60120 05244 9.5 60114 17.0 x 19.0 2.0 Hand/Hydr. 60028 60029 60030 60116 34733 04638 12.7 33967 19.1 x 29.0 2.0 Hand/Hydr. 60031 60032 60033 60117 60165 60258 15.9 60167 19.1 x 33.3 2.0 Hand/Hydr. 60034 60035 60036 60117 60165 60258 15.9 60167 21.9 x 25.9 2.0 Hand/Hydr. 60037 60038 60039 60117 60165 60258 15.9 60167 22.0 x 30.0 2.0 Hand/Hydr. 60040 60041 60042 60117 60165 60258 15.9 60167 22.0 x 42.0 2.0 Hand/Hydr. 60043 60045 60046 60117 60165 60258 15.9 60167 25.1 x 29.0 2.0 Hand/Hydr. 60047 60048 60049 60117 60165 60258 15.9 60167 31.8 x 35.1 2.0 Hand/Hydr. 60050 60051 60052 60117 60165 60258 15.9 60167 33.3 x 66.7 3.0 Hydr. 60053 60054 60055 60118 60235 30.2 35.0 x 52.0 3.0 Hydr. 60056 60057 60058 60118 60235 30.2 35.0 x 65.0 3.0 Hydr. 60059 60060 60061 60118 60235 30.2 35.0 x 82.0 2.0 Hydr.* 60062 60063 60064 60118 60235 30.2 35.0 x 112.0 2.0 Hydr.* 60065 60066 60067 60118 60235 30.2 46.0 x 92.0 3.0 Hydr.* 60068 60069 60070 60118 60235 30.2 57.2 x 88.9 3.0 Hydr.* 60071 60072 60073 60118 60235 30.2 68.0 x 138.0 2.0 Hydr.** 60074 60075 60076 60118 60235 30.2 Special Square SQUARE PUNCHES and Individual Parts Counter Nut Punch Die Draw Stud Ball Bearing Driver Nut Hole Size Maximum Operation Punch Individual Parts Pilot Optional Capacity Type Unit Hole Ø Adapter for Mild Steel Ball Bearing Conter Hydraulic mm (ST 37) mm Punch Die Draw Stud Nut Nut mm Drivers 12.7 x 12.7 1.5 Hand/Hydr. 60001 60002 60003 60115 60120 05244 9.5 60114 15.9 x 15.9 2.0 Hand/Hydr. 60004 60005 60006 60116 34733 04638 12.7 33967 19.1 x 19.1 2.0 Hand/Hydr. 60007 60008 60009 60116 34733 04638 12.7 33967 22.4 x 22.4 2.0 Hand/Hydr. 60259 60011 60012 60116 34733 04638 12.7 33967 24.0 x 24.0 2.0 Hand/Hydr. 60013 60014 60015 60116 34733 04638 12.7 33967 25.4 x 25.4 2.0 Hand/Hydr. 60016 60017 60018 60117 60165 60258 15.9 60167 45.0 x 45.0 2.0 Hydr. 60287 76764 76765 60118 60235 30.2 46.0 x 46.0 3.0 Hydr. 60019 60020 60021 60118 60235 30.2 50.8 x 50.8 3.0 Hydr. 60168 60169 60170 60118 60235 30.2 68.0 x 68.0 3.0 Hydr. 60171 60172 60173 60118 60235 30.2 92.0 x 92.0 3.0 Hydr.* 60174 60175 60176 60118 60235 30.2 * 104.8 x 104.8 2.0 Hydr.* 60177 60178 60179 60118 60235 30.2 * 138.0 x 138.0 2.0 Hydr.** 60234 60023 60024 60118 60235 30.2 * * Use with hydraulic punch drivers 15906, 25097 resp. LS60Plus ** Use with hydraulic punch driver 15906 and 25097 SPECIAL SQUARE PUNCHES and Individual Parts Hole Size Maximum Operation Punch Individual Parts Pilot Optional Capacity Type Unit Hole Ø Adapter for Mild Steel Ball Bearing Conter Hydraulic mm (ST 37) mm Punch Die Draw Stud Nut Nut mm Drivers 22.5 Į (A) 20.1 (B) 2.0 Hand/Hydr. 60125 60126 60127 60116 34733 04638 12.7 33967 We recommend to lubricate the draw studs. Please use Greenlee paste No. 11547 on page 22. Custom size punches on request. Draw Stud Selection Guide on page 18. 15

B OILTIGHT PUNCHES and Individual Parts A C Counter Nut Punch Die Draw Stud Ball Bearing Driver Nut Hole Size Maximum Operation Punch Individual Parts Pilot Optional Capacity Type Unit Hole Ø Adapter for Mild Steel Ball Bearing Conter Hydraulic mm (ST 37) mm Punch Die Draw Stud Nut Nut mm Drivers 22.5 (A) 3.2 (B) 25.4 (C) 2.0 Hand/Hydr. 60238 60239 60250 60117 60165 60258 15.9 60167 30.5 (A) 4.8 (B) 36.0 (C) 3.0 Hand/Hydr. 60242 60243 60249 60117 60165 60258 15.9 60167 D PUNCHES and Individual Parts A B Counter Nut Punch Die Draw Stud Ball Bearing Driver Nut Hole Size Maximum Operation Punch Individual Parts Optional Capacity Type Unit Adapter mm Mild Steel Ball Bearing Counter for A B (ST 37) mm Punch Die Draw Stud Nut Nut Hydraulic Drivers 12.7 11.9 2.0 Hand/Hydr. 60077 60078 60079 60115 60120 05244 60114 15.9 15.1 2.0 Hand/Hydr. 60080 60081 60082 60113 34733 04638 33967 19.1 17.9 2.0 Hand/Hydr. 60083 60084 60085 60113 34733 04638 33967 DOUBLE D PUNCHES and Individual Parts A B Counter Nut Punch Die Draw Stud Ball Bearing Driver Nut Hole Size Maximum Operation Punch Individual Parts Optional Capacity Type Unit Adapter mm Mild Steel Ball Bearing Counter for A B (ST 37) mm Punch Die Draw Stud Nut Nut Hydraulic Drivers 19.5 16.3 2.0 Hand/Hydr. 60086 60087 60088 60113 34733 04638 33967 20.2 17.6 2.0 Hand/Hydr. 60089 60090 60091 60113 34733 04638 33967 23.2 19.2 2.0 Hand/Hydr. 60092 60093 60094 60113 34733 04638 33967 23.2 20.2 2.0 Hand/Hydr. 60095 60096 60097 60113 34733 04638 33967 34.9 28.6 2.0 Hand/Hydr. 60098 60099 60100 60166 60165 60258 60167 B A C KEY PUNCHES and Individual Parts Counter Nut Punch Die Draw Stud Ball Bearing Driver Nut Hole Size Maximum Operation Punch Individual Parts Optional Capacity Type Unit Adapter mm Mild Steel Ball Bearing Counter for A B (ST 37) mm Punch Die Draw Stud Nut Nut Hydraulic Drivers 12.2 1.4 1.5 Hand/Hydr. 60101 60102 60103 60115 60120 05244 60114 29.7 3.1 2.0 Hand/Hydr. 60104 60105 60106 60166 60165 60258 60167 32.1 4.0 2.0 Hand/Hydr. 60107 60108 60109 60166 60165 60258 60167 33.7 2.6 2.0 Hand/Hydr. 60110 60111 60112 60166 60165 60258 60167 16 We recommend to lubricate the draw studs. Please use Greenlee paste No. 11547 on page 22. Custom size punches on request. Draw Stud Selection Guide on page 18.

CYLINDER LOCK PUNCH and Individual Parts Counter Nut Punch Die Draw Stud Ball Bearing Driver Nut Hole Size Maximum Operation Punch Individual Parts Optional Capacity Type Unit Adapter for mm Mild Steel Ball Bearing Conter Hydraulic A B C (ST 37) mm Punch Die Draw Stud Nut Nut Spacer Drivers 17.0 33.3 10.5 2.0 Hand/Hydr. 05307 05302 05303 05304 34733 50011 05305 33967 Electronic Connector Panel Punches Fast, accurate panel punching with no sawing or filing required. Cut-out and mounting slots are punched in one operation. Operation: Manually with wrench or with hydraulic driver (additional adapter 33967 needed). Capacity: 1.5 mm mild steel and 3.5 mm aluminium. Universal size punches for front or back mount connectors in 9, 15, 25, 37 or 50 pin configuration. No. Punch No. of Operation Dimensions mm Individual Parts Optional Unit pins Adapter Ball Bearing Counter for A B C Punch Die Draw Stud Nut Nut Hydraulic Drivers 229 34436 9 Hand/Hydr. 20.0 24.9 11.9 34441 35196 34421 34733 04638 33967 231 34437 15 Hand/Hydr. 28.6 33.3 11.9 34442 35197 34421 34733 04638 33967 RS232 34420 25 Hand/Hydr. 42.0 47.1 11.9 34418 35198 34421 34733 04638 33967 234 34429 37 Hand/Hydr. 58.3 63.4 11.9 34427 35199 34421 34733 04638 33967 238 34444 50 Hand/Hydr. 55.9 61.0 14.7 34443 35200 34421 34733 04638 33967 4,8 mm Keyway Punch No. 720 26534 3,2 mm Eliminates time consuming hand sawing and filing when making keyways for push button switches. Punches 3.2 mm keyways for 22.5 or 4.8 mm keyways for 30.5 mm push button holes in less than 2 sec. Capacity: Up to 3.0 mm mild steel. Spare punch 26536 Spare die 26538 We recommend to lubricate the draw studs. Please use Greenlee paste No. 11547 on page 22. Custom size punches on request. Draw Stud Selection Guide on page 18. 17

Replacement Draw Studs for Special Shape Punches 60166 12.7 x 117 mm 60117 12.7 x 117 mm 60113 9.5 x 93 mm 60116 9.5 x 95 mm 34421 9.5 x 88 mm 60118 19 x 171 mm 60115 6.3 x 87 mm 05304 9.5 x 135 mm 18 We recommend to lubricate the draw studs. Please use Greenlee paste No. 11547 on page 22.

SLUG BUSTER Knockout Punch Sets Assortments of commonly used knockout punch sets to meet the contractor s needs. Ratchet operation. Punches and dies are compatible with all hydraulic punch drivers. Slug Buster ISO 36692 including 5 ISO sizes 16 to 40, draw studs 00042 and 04040, ratchet 34941, step bit 36018, and plastic case 36685 Slug Buster Pg 36690 including 5 Pg sizes 9 to 21 and 30.5 mm, draw studs 00042, ratchet 34941, step bit 36018, and plastic case 36685 Slug Buster ISO 36693 including 7 ISO sizes 16 to 63, draw studs 00042 and 04042, ratchet 34941, step bit 36018, and plastic case 36685 Slug Buster Pg 36691 including 8 Pg sizes 9 to 48 and 30.5 mm, draw studs 00042 and 04042, ratchet 34941, step bit 36018, and plastic case 36685 19

Hydraulic Punches without punching tools 34291/(7804E) Quick Draw Hand-Hydraulic Punch Driver with Straight Driver Head Ideal for fast, straight-on front panel punching. Set includes draw stud 30043 and 31872, spacer 03248, adapter 33967. In plastic case (no punches) 35202. Punching Capacity 80 kn. 34299/(7904E) Quick Draw 90 Hand-Hydraulic Punch Driver with Right Angle Driver Head Rotates 180 for maximum flexibility in tight working areas. Set includes draw stud 3004 and 31872, spacer 03248, adapter 33967. In plastic case (no punches) 35202. Punching Capacity 80 kn. Hydraulic Punch Driver with punching tools 35611/(7804ESB) Hydraulic Punch Driver Kit includes: Hydraulic Punch Driver, SLUG-BUSTER punches/dies Pg 9, 11, 13, 16, 21 and 30.5 mm, draw studs 30043 and 31872, spacer 03248, adapter 33967 and plastic case 35202. 35615/(7904ESB) Hydraulic Punch Driver Kit includes: Hydraulic Punch Driver, SLUG-BUSTER punches/dies Pg 9, 11, 13, 16, 21 and 30.5 mm, draw studs 30043 and 31872, spacer 03248, adapter 33967 and plastic case 35202. 35614/(7804ISO) Hydraulic Punch Driver Kit includes: Hydraulic Punch Driver, SLUG-BUSTER punches/dies ISO 16, 20, 25, 32, 40, draw studs 30043 and 31872, spacer 03248, adapter 33967 and plastic case 35202. 35616/(7904ISO) Hydraulic Punch Driver Kit includes: Hydraulic Punch Driver, SLUG-BUSTER punches/dies ISO 16, 20, 25, 32, 40, draw studs 30043 and 31872, spacer 03248, adapter 33967 and plastic case 35202. Punching Capacity: Up to 64 mm round holes and 68 x 68 mm square holes Max. Material: Up to 3 mm mild steel (ST 37) or up to 3.5 mm stainless steel (depending on hole size) 20

Battery Powered Punch Driver LS 60 Plus Micro processor controlled Electro-hydraulic punch driver with 12 volt battery. Punching Capacity 60 kn Punching quick and easy. Needs only 8 seconds to punch Pg 48 hole in 3 mm mild steel. Unit includes battery and battery charger. Set includes draw studs 30043 and 03294, spacer 03248, adapter 33967, step bit 34410 in metal case (no punches). Punching capacity: Up to 104.8 x 104.8 square holes Up to 96 mm round holes Up to 92 x 92 mm square holes Up to 46 x 92 mm rectangular holes Up to 68 x 68 mm square holes Up to 64 mm round holes (SLUG-BUSTER ) Up to 64 mm round holes (SLUG-SPLITTER ) in 2.0 mm mild steel in 2.5 mm mild steel in 3.0 mm mild steel in 3.5 mm mild steel in 2.5 mm stainless steel The integrated micro processor control ensures that the Punch Driver stops automatically once the punching operation has been completed. This function guarantees safety for the user and makes the punching tools last longer. Weight: approx. 3.900 kg (incl. battery) Available accessories: Replacement battery RA 3 GL Battery charger LG 4 GL Quick battery charger LG 5 GL, charging time approx. 15 min. Metal case MKLS 60 Mains adapter NG 1/230 GL Also available as 230V mains operated tool, Art. No. NLS 60. Note: For punching tools for mild steel refer to page 11. For punching tools for stainless steel refer to page 12. 21

Hydraulic Drivers 15906/(7646) Ram and Hand Pump Hydraulic Driver Compact design is ideal for field use on construction sites and maintenance jobs. Punching Capacity 110 kn. Contents: Hydraulic cylinder 17091 Draw Stud 03294 Draw Stud 30043 Punch Sleeve 03170 Spacer Set 15908 (each one 03248, 03249 and 06904) Step Bit 34410 Hand Pump 13284 High Pressure Hose 06302 Plastic Case 30206 (no punches) 25097/(7625) Ram and Foot Pump Hydraulic Driver Foot operation frees both hands to operate punch. Punching Capacity 110 kn Contents: Hydraulic cylinder 17091 Draw Stud 03294 Draw Stud 30043 Punching Sleeve 03170 Spacer Set 15908 (each one 03248, 03249 and 06904) Step Bit 34410 Foot Pump 31353 High Pressure Hose 37729 Metal Case 23955 (no punches) Punching Capacity: Up to 143.7 mm round holes and 138 x 138 mm square holes Max. Material: Up to 3 mm mild steel (ST 37) or up to 3.5 mm stainless steel (depending on hole size) 11547 Anti Seize Assembly Paste Assembly Paste for statically and dynamically highly stressed thread connections. Corrosion protection, to lubricate draw studs. 30 gr tube 22

Hydraulic Pumps Hydraulic Hand Pump 767 13284 Lightweight and portable for use with Greenlee Punch Drivers. Versatile, operates in any position. Single speed. Rugged steel pump body/reservoir with cast aluminium handle. Has mounting holes for easy, permanent mounting. Capacity: Dimensions (L x W x H): Weight: max. 460 bar approx. 330 x 100 x 100 mm approx. 2.7 kg Hydraulic Foot Pump 1725 31353 Free both hands to position and hold the working tool. Foot activated release lever. Hold down pin keeps pedal down for storage and transport. Angled base bar keeps the pump upright and stable. Includes 6.4 mm female coupler with dust cap. Capacity: Dimensions (L x W x H): Weight: max. 460 bar approx. 400 x 200 x 150 mm approx. 5.0 kg High Pressure Hydraulic Hand Pump 755 15677 Portable and powerful. Versatile, operates in any position. Steel pump body and handle with rubber grip. Wide base for stability. Mounting holes for permanent positioning. Includes 9.5 mm female hydraulic connector and dust cap. Capacity: Dimensions (L x W x H): Weight: max. 700 bar approx. 650 x 180 x 150 mm approx. 8.0 kg Hydraulic Hoses and Hydraulic Oil High Pressure Hose 37729 for pump 1725, including hose 52516 (6.4 mm x 3.0 m) filled with hydraulic oil, 2 male couplers 54169 and dust caps 54170. High Pressure Hose 38316 for pump 767, including hose 50386 (6.4 mm x 0.90 m) without hydraulic oil, male coupler 6.4 mm 54169, dust cap 54170 and 1 / 4" NPT swivel threaded fitting. High Pressure Hose 11289 for pump 755, including hose 50760 (9.5 mm x 1.80 m) filled with hydraulic oil and male coupler 50823. Hydraulic Oil specially compounded for use with Greenlee hydraulic equipment 51059 3.8 l 50806 0.95 l 23

Portable C-Frame Punch Driver 1731 Fast, one shot punching, no predrilling of pilot holes. Great for punching junction boxes and small enclosures. Throat 200 mm. Weight of C-Frame 6.8 kg. Punching capacity in mild steel up to 3.0 mm. Punching range 15.2 up to 30.5 mm. As drive unit we recommend GREENLEE hydraulic foot-pump 1725, hand pump 767 resp. electro hydraulic pump 05306. 15911 C-Frame Punch Driver with ram Scope of supply: Punch Adapter 9.5 mm 13276 Punch Adapter 19.0 mm 13277 Punch Pg 16 04006 Punch Pg 21 04008 Punch 34.6 mm 04010 Die Pg 16 12087 Die Pg 21 12086 Die 34.6 mm 12085 Steel Case 16634 Accessories: Punch Pg 9 21316 Die Pg 9 18557 Punch Pg11 17700 Die Pg 11 18558 Punch Pg 13 17697 Die Pg 13 18559 Punch 30.5 mm oiltight 36282 Die 30.5 mm oiltight 37103 Die ISO 16 76642 Die ISO 20 76643 Die ISO 25 76644 Die ISO 32 76645 Punch ISO 16 35193 Punch ISO 20 17697 Punch ISO 25 03986 Punch ISO 32 24459 Portable C-Frame Punch Drivers 1732 Fast, one shot punching, no predrilling of pilot holes. Great for punching junction boxes and small enclosures. Throat 200 mm. Weight of C-Frame 27 kg. Punching capacity in mild steel up to 3.0 mm. Use with GREENLEE standard round punches/dies, hole size 15.2 up to 115.4 mm. As drive we recommend GREENLEE hydraulic foot pump 755. 27361 C-Frame Punch Driver with ram Scope of supply: Die Adapter 9.5 mm 11791 Die Adapter 19.0 mm 11790 Die Adapter 28.6 mm 11789 Punch Adapter 9.5 mm 13266 Punch Adapter 19.0 mm 13267 Punch Adapter 28.6 mm 13268 Nut 19.0 mm 54265 Steel Case 27335 24

DIN Rail Cutter and Punch Manual operation Burr free cuts and punching of mounting slots High leverage for easier operation Includes cutting die set with 5 profiles Punches vertical and horizontal mounting holes 6.4 x 12.0 mm Mounting holes for bench mounting Profiles of cutting die set: A 15.0 mm B 10.5 mm C 5.5 mm D 1.0 mm A 35.0 mm B 27.0 mm C 7.5 mm D 1.0 mm A 35.0 mm B 27.0 mm C 15.0 mm D 1.5 mm Niedax Profile 2975 34 x 15 mm Neutral bus bar 10 x 3 mm 11541 DIN Rail Cutter and Punch with cutting die set, centering device, manual handle, 1 m length stop incl. fixing device Accessories: 11542 11543 11544 11545 11546 11553 Manual handle Length stop 1 m Cutting die set Centering device for right-angled cutting Device for hydraulic operation (with Quick Draw Punch Drivers resp. Battery Powered Punch Driver LS60plus) Fixing device Special cutting die sets on request 25

Variable Pitch Cobalt Steel Bi-Metal Hole Saw Hole Saws are versatile holemaking tools because of their ability to cut holes in various materials with minimum effort and little wear on the tool. GREENLEE arbors can be used with different Hole Saw sizes. Pilot Drills are replaceable. Cut thru steel, cast iron, brass, aluminium, fiberglass, wood and plastics. Cobalt tool steel bi-metal construction and special surface treatment for longer life. Positive rake variable pitch design provides faster, easier cutting. Heavy-duty back plate reduces vibration and ensures concentric running. Cutting depth 41.3 mm Tooth hardness Rc 65-68 Arbors have to be ordered separately not included in scope of supply. Hole Dia. Use with Recommended GREENLEE Hole Saw Cutting Speeds rpm Art.-No. Nominal size Actual size Weight mm mm Pg ISO Arbor No. g Mild Steel Cast Iron Brass Aluminium 19131 14 14.3 46 580 400 790 900 19132 16 15.9 Pg 9 46 550 365 730 825 19133 17 17.5 ISO 16 37157 46 500 330 665 750 19134 19 19.0 Pg 11 or 46 460 300 600 690 19135 21 20.6 Pg 13 ISO 20 37155 46 425 280 560 635 19136 22 22.2 Pg 16 or 46 390 260 520 585 19137 24 23.8 38522 46 370 245 495 555 19138 25 25.4 ISO 25 or 46 350 235 470 525 19140 27 27.0 02800 46 325 215 435 480 19141 29 28.6 Pg 21 46 300 200 400 450 19143 30 30.2 91 285 190 380 425 19144 32 31.7 91 275 180 360 410 19145 33 33.3 ISO 32 91 260 175 345 390 19146 35 35.0 46 250 165 330 375 02800 19147 37 36.5 Pg 29 91 240 160 315 360 or 19148 38 38.1 91 230 150 300 345 37156 19149 40 39.7 91 220 145 290 330 or 19150 41 41.3 ISO 40 91 210 140 280 315 37154 19151 43 42.9 137 205 135 270 305 or 19152 44 44.4 91 195 130 260 295 02801 19153 46 46.0 91 190 125 250 285 19154 48 47.6 Pg 36 137 180 120 240 270 19155 51 50.8 ISO 50 91 170 115 230 255 19157 52 52.4 137 165 110 220 245 19158 54 54.0 Pg 42 137 160 105 210 240 19159 57 57.2 137 150 100 200 225 19160 59 58.7 227 150 100 195 225 19161 60 60.3 Pg 48 137 140 95 190 220 19162 63 63.5 ISO 63 37156 137 135 90 180 205 19163 65 65.0 or 182 130 85 175 200 19164 67 66.7 02801 182 130 85 170 195 36169 68 68.0 182 125 80 160 185 19165 70 69.8 182 125 80 160 185 19166 73 73.0 182 120 80 160 180 36170 74 74.0 182 115 75 150 170 19167 76 76.2 227 115 75 150 170 19168 79 79.4 227 110 70 140 165 19169 83 82.5 273 105 70 140 155 19170 86 85.7 273 100 65 130 150 19171 89 88.9 273 95 65 130 145 19172 92 92.1 273 95 60 120 140 19174 95 95.2 318 90 60 120 135 19175 98 98.4 318 90 60 120 135 19176 102 101.6 37156 318 85 55 110 130 19177 105 104.8 or 363 80 55 110 120 19178 108 108.0 02801 363 80 55 110 120 19179 111 111.1 363 80 50 100 120 19180 114 114.3 409 75 50 100 105 19181 121 120.6 499 75 50 95 95 19182 127 127.0 545 65 45 90 90 19183 140 139.7 545 60 35 85 85 19184 152 152.4 636 55 35 75 75 26

Variable Pitch Bi-Metal Hole Saw Kits Several kits available in rugged plastic cases. Heavy-duty back plate increases stability, reduces vibration and ensures concentric running. 29209 Four sizes most commonly used for installation of sockets and halogen lights (downlights). 06933 06931 Art.-No. Description Nominal size 29209 19192 06931 06933 mm (830 Pg) (830) 19132 Hole Saw PG 9 16 19134 Hole Saw PG 11 19 19135 Hole Saw PG 13 21 19136 Hole Saw PG 16 22 19141 Hole Saw PG 21 29 19143 Hole Saw 30.2 mm 30 19148 Hole Saw PG 29 37 19154 Hole Saw PG 36 48 19161 Hole Saw PG 48 60 19146 Hole Saw 34.9 mm 35 19152 Hole Saw 44.4 mm 44 19155 Hole Saw 50.8 mm (ISO 50) 51 19162 Hole Saw 63.5 mm 63 19167 Hole Saw 76.2 mm 76 19172 Hole Saw 92.1 mm 92 19177 Hole Saw 104.8 mm 105 19180 Hole Saw 114.3 mm 114 19161 Hole Saw 60.3 mm 60 19167 Hole Saw 76.2 mm 76 19169 Hole Saw 82.5 mm 83 36169 Hole Saw 68.0 mm 68 37157 Arbor 6.4 mm + Pilot Drills 37155 Arbor 11.1 mm + Pilot Drills 37156 Arbor 12.7 mm + Pilot Drills 06929 SDS-Arbor 32 152 mm 37181 Plastic carrying case 30236 Plastic carrying case 06930 Plastic carrying case = Scope of supply 27

HSS Bi Metal Hole Saw Kit ISO Sizes according to EN 50262 Cut through steel, non-ferrous-metal, cast iron, stainless steel, wood and plastic. HSS Bi Metal Hole Saws with variable pitch, cutting depth 40 45 mm. 06949 Kit containing one of each hole saw: ISO 16 20 25, 32 40 50 63 together with two arbors (37156 + 37155) and pilot drill. The kit is supplied in a sturdy plastic storage case. Range ISO 16 20 25 32 40 50 63 Nominal size mm 17 21 26 33 41 51 64 Arbors with Replacement HSS Pilot Drills 37157 38522 37155 Art.-No. Hole Saw Shank Pilot Drills Ø Ø 37157 14-30 mm 6.4 mm 37623 38522 14-30 mm 7.9 mm 38526 37155 14-30 mm 11.1 mm 37623, 38526 37154 32-51 mm 7.9 mm 37623, 38526 37156 32-152 mm 11.1 mm 37623, 38526 06969 14-30 mm SDS 38526 06929 32-152 mm SDS 38526 02800 14-40 mm 7.9 mm 37623 02801 14-152 mm 11.1 mm 37623 37154 37156 06929 06969 Quick Change Arbors 02800/ 02801 28

Quick Change Starter Set 02802 Kit includes: Hole saw 22 mm Quick Change arbor 7.9 mm 02800 3 adaptors 02803 Bushing for hole saws 32 mm to 40 mm 02805 Adaptor 02803 For hole saws 14 mm to 40 mm Adaptor 02804 For hole saws 41 mm to 152 mm Bushing 02805 For hole saws 30 mm to 40 mm Kwik Change Carbide Tipped Hole Cutters Short Type / Cutting Depth 12 mm Holesaw Technology in Carbide Tipped Cutters. Kwik Change Arbor allows to change Cutter Heads with a simple push and turn. Allowing the same arbor to be used with different size cutting heads. The Kwik Change Carbide Tipped Cutters offer the flexibility of a holesaw. Ejector spring makes removal of slug easier and can be used for all sizes above Pg 11. Shank 9.5 mm dia. resp. 12.7 mm with three flats. Carbide Tipped Hole Cutters cut mild steel, stainless steel, non ferrous metal, plastics, lightweight boards and wood up to 4.5 mm thickness. Arbors and Pilot Drills: 05752 05753 05761 05762 Kwik Change Arbor with drill bit for Nominal Size 16 through 58 mm 9.5 mm Kwik Change Arbor with drill bit for Nominal Size 60 through 76 mm 12.7 mm Pilot Drill for Arbor 05752 Pilot Drill for Arbor 05753 Arbors have to be ordered separately not included in scope of supply. Hole Saw Nominal size Actual size Hole Dia. Use with mm mm Pg ISO Arbor No. 05691 16 15.9 Pg 9 05752 05692 18 17.5 ISO 16 05752 05693 19 19.0 Pg 11 05752 05694 21 20.6 Pg 13 ISO 20 05752 05695 22 22.2 Pg 16 05752 05696 25 25.4 ISO 25 05752 05957 27 27.0 05752 05697 29 28.6 Pg 21 05752 05698 31 31.0 05752 05699 32 31.8 05752 05958 34 33.3 05752 05700 35 34.9 05752 05959 37 36.5 Pg 29 05752 05701 38 38.1 05752 05702 45 44.4 05752 05703 51 50.8 ISO 50 05752 05960 54 54.0 Pg 42 05752 05704 58 57.2 05752 05961 60 60.3 Pg 48 05753 05705 64 63.5 ISO 63 05753 05706 67 66.7 05753 05707 76 76.2 05753 29

Kwik Change Hole Cutter Kits 05766 Hole Cutter Kit includes each one Pg 16, Pg 21, 35 mm, 45 mm and ISO 50, Arbor 05752, Pilot Drill and Hex Key. In plastic box. 05820 Hole Cutter Kit includes each one Pg 16, Pg 21 and 35 mm, Arbor 05752, Pilot Drill and Hex Key. In plastic box. Carbide Tipped Hole Cutters Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminium and steel. Flange stop prevents over drilling. Replaceable cobalt steel pilot drill, with split point tip design, improves performance and resists walking; eliminates need for center punch. Max. cutting depth: 10 mm Max. thickness: 4 mm Hole Saw Nominal size Actual size Min. Recommended chuck size Cutting speed mm Pg ISO mm Stainless Mild steel 38324 19.0 Pg 11 6.4 550 800 38325 20.6 Pg 13 ISO 20 6.4 510 740 38326 22.2 Pg 16 6.4 475 690 38327 25.4 ISO 25 9.5 415 600 38328 28.6 Pg 21 9.5 370 535 38329 30.5 9.5 345 500 38330 31.7 9.5 330 485 38331 35.0 9.5 300 435 38332 38.1 9.5 275 400 38333 44.4 9.5 235 340 38334 50.8 ISO 50 9.5 205 300 38336 63.5 ISO 63 12.7 165 240 Replaceable Pilot Drills for Carbide Tipped Hole Cutters Art.-No. for Hole Saw size mm 38389 19.0 50.8 38390 63.5 Carbide Tipped Cutter Kit 03599 Includes one each Pg 16, Pg 21 and 35.0 mm, pilot drill and allen key 3 mm, in plastic box. High Performance Cutting Oil 11548 Efficient lubricant allows higher cutting speeds, longer tool life. For drilling, cutting and punching applications. Spray 400 ml 30

Kwik Stepper TM Step Bits For burrfree drilling of mild steel, tubes, non ferrous metal, stainless steel and plastic material. Step Bits center, spot drill, drill and debur in one single operation. Self starting tip resists walking or skidding, even on curved surfaces. Kwik Stepper Step Bits are manufactured to latest standards using CNC technique. Step Bit Drilling range Range of application Total length Steps Shank mm Ø mm Ø mm mm Ø 34401 3.2 12.7 3.2 / 4.0 / 4.8 / 5.6 / 6.4 / 7.1 / 7.9 / 8.7 / 9.5 / 10.3 / 11.1 / 11.9 / 12.7 80 13 6.4 36402 4.8 12.7 4.8 / 6.4 / 7.9 / 9.5 / 11.1 / 12.7 80 6 6.4 34411 22.2 22.2 85 1 9.5 34403 4.8 22.2 4.8 / 6.4 / 7.9 / 9.5 / 11.1 / 12.7 / 14.3 / 15.9 / 17.5 / 19.1 / 20.6 / 22.2 85 12 9.5 30008 12.5 + 28.6 12.7 / 122.2 / 128.6 57 3 9.5 36414 22.2 34.9 22.2 / 28.6 / 31.0 / 31.8 / 34.9 73 5 9.5 36018 9.7 to drill pilot hole for Greenlee draw studs 40 1 6.4 34410 12.7 to drill pilot hole for Greenlee draw studs 40 1 6.4 36020 Pg 7 21 for conduit threads (through holes) 90 7 9.5 Pg7 / Pg9 / Pg11 / Pg13.5 / Pg16 / Pg21 / 30.5 36022 ISO 16 32 for ISO holes 16 / 20 / 25 / 32 80 4 9.5 Kwik Stepper TM Step Bits with ROTASTOP -Shank with spiral flute (DBGM) and "Edge-breaker" (DBGM) deburring zone, for drilling and roughening of metal sheets, tubes, non ferrous metal, stainless steel and plastic. Deburring of both sides in one operation. The spiral flute represents an extended cutting edge. The cutting performance is being distributed over a greater length, a longer cutting edge. The result is a peeling, flowing cut. Features of the spiral flute are less force needed improved cutting performance longer lifetime smooth cutting minimum burr ROTASTOP -Shank Innovative Shank Design. Cylindrical Shank: Slipping in the Chuck No optimum Torque transfer Triangular Surface Shank: 30 % Transmission Zone Changing tools is very timeconsuming ROTASTOP - Shank: 90 % Transmission Zone precision tool changing within seconds optimum transmission of the torque 31

Step Bit Drilling range Range of application Total length Steps Shank mm Ø mm Ø mm mm Ø 06984 4 12 4.0 / 5.0 / 6.0 / 7.0 / 8.0 / 9.0 / 10.0 / 11.0 / 12.0 80 9 6.0 06985 4 20 4.0 / 6.0 / 8.0 / 10.0 / 12.0 / 14.0 / 16.0 / 18.0 / 20.0 67 9 8.0 06986 6 30 6.0 / 8.0 / 10.0 / 12.0 / 14.0 / 16.0 / 18.0 / 20.0 / 22.0 / 24.0 / 26.0 / 28.0 / 30.0 98 13 10.0 06987 6 36 6.0 / 9.0 / 12.0 / 15.0 / 18.0 / 21.0 / 24.0 / 27.0 / 30.0 / 33.0 / 36.0 82 11 12.0 06988 ISO 12 40 for ISO holes 12 /16 / 20 / 25 / 32 / 40 110 6 12.0 06990 Kwik Stepper TM Step Bit Set metal box includes one each 06984, 06985 and 06986 Kombi Bit Set 11630 Drill, tap and deburr in one operation, high precision tool, for power drills with right and left hand operation, for use with mild steel, stainless steel and non ferrous metals, M3, M4, M5, M6, M8, M10 and bit holder, diameter = max. material thickness Kombi Bits 11631 11632 11633 11634 11635 11636 11637 M3 M4 M5 M6 M8 M10 Bit Holder 32