Overall dimensions... page 34 Efficiency... page 36 Options... page 37. SJ Series screw jacks - travelling nut (Mod.B) - spare parts...

Screw jacks INDEX 1. General Screw jacks verview... page Manufacturing features... page Materials and cmpnents... page 3 Acme screw jacks summary... page 4 Ball screw jacks summary... page 5 Mdels... page 6 Versins... page 7 Screw jacks selectin criteria... page 8 Self-lcking cnditins... page 1 Acme screw buckling... page 13 Critical rtating speed f acme screw... page 16. MA Series screw jacks Structural elements... page 18 MA Series screw jacks with 1-start acme screw - technical specificatins... page 0 MA Series screw jacks with 1-start acme screw - perfrmances... page MA Series screw jacks with -starts acme screw - technical specificatins... page 4 MA Series screw jacks with -starts acme screw - perfrmances... page 6 MA Series screw jacks with 3-starts acme screw - technical specificatins... page 8 MA Series screw jacks with 3-starts acme screw - perfrmances... page 9 MA Series screw jacks with 4-starts acme screw - technical specificatins... page 31 MA Series screw jacks with 4-starts acme screw - perfrmances... page 3 Overall dimensins... page 34 Efficiency... page 36 Optins... page 37 MA Series screw jacks - travelling screw (Md.A) - cding descriptin... page 48 MA Series screw jacks - travelling nut (Md.B) - cding descriptin... page 50 MA Series screw jacks - travelling screw (Md.A) - spare parts... page 5 MA Series screw jacks - travelling nut (Md.B) - spare parts... page 53 3. SJ Series screw jacks Structural elements... page 54 SJ Series screw jacks with 1-start acme screw - technical specificatins... page 56 SJ Series screw jacks with 1-start acme screw - perfrmances... page 58 SJ Series screw jacks with 1-start acme screw - efficiency... page 61 SJ Series screw jacks with -starts acme screw - technical specificatins... page 6 SJ Series screw jacks with -starts acme screw - perfrmances... page 64 SJ Series screw jacks with -starts acme screw - efficiency... page 67 Overall dimensins... page 68 Optins... page 7 SJ Series screw jacks - travelling screw (Md.A) - cding descriptin... page 80 SJ Series screw jacks - travelling nut (Md.B) - cding descriptin... page 8 SJ Series screw jacks - travelling screw (Md.A) - spare parts... page 84 SJ Series screw jacks - travelling nut (Md.B) - spare parts... page 85 4. Installatin Maintenance - Lubricants... page 86 Prduct label... page 87 Screw jacks - travelling screw (Md.A) - selectin frm... page 88 Screw jacks - travelling nut (Md.B) - selectin frm... page 90 Screw jack dimensins check sheet... page 9 Screw jack lifting systems, lay-ut... page 94

Screw jacks 1 Screw jacks verview Screw jacks transfrm a rtary mtin frm an electric, hydraulic r pneumatic mtr r even manual peratin int a linear mvement in a vertical (push-pull lifting) r hrizntal psitin. Screw jacks can be installed as a single unit r in lifting systems with different layuts cnnected by driveshafts, cuplings and bevel gearbxes. Screw jacks enable the synchrnized cnstant mvement f lifting systems even with a varying lad. SERVOMECH screw jacks are able t wrk under either push r pull lad cnditins and munted vertically upward, dwnward r hrizntally. SERVOMECH screw jacks mdels are available in tw mdels: travelling screw (Mdel A) travelling nut (Mdel B) SERVOMECH prduces tw screw jacks series: MA and SJ. Bth series are available in different sizes in rder t btain the mst suitable size in terms f perfrmances and csts fr each applicatin. MA Series: high perfrmances, acme screw, il lubricated, high efficiency, increased duty cycle up t 40% ver a 10 minute perid r 30% ver a 1 hur perid at 5 C envirnment temperature. SJ Series: standard perfrmances, acme screw, grease lubricated, increased duty cycle up t 30% ver a 10 minute perid r 0% ver a 1 hur perid at 5 C envirnment temperature MA BS Series: travelling ball screw (Md.A) r ball screw with travelling nut (Md.B), il lubricated, high perfrmances and efficiency, increased duty cycle up t 100% at 5 C envirnment temperature. SJ BS Series: ball screw with travelling nut (Md.B), grease lubricated, increased duty cycle up t 70% at 5 C envirnment temperature. Manufacturing features SERVOMECH screw jacks are ttally designed and manufactured inside the cmpany with high technlgy and CNC machinery. Quality System accrding t ISO 9001:008, certified by TÜV. Cntrl tests are carried ut in-line during manufacturing prcesses t mnitr the prductin quality. Final cntrl and functinal check test are carried ut t ensure the ttal quality and reliability f the final prduct. Input drive: wrm gear, high efficiency design, ZI invlute prfile, reduced axial backlash; brnze helical wrmwheel EN 198 CuSn1-C; true invlute wrm in steel 0 MnCr 5 (UNI EN 10084), with hardened and grund thread and shaft. Husing: mnblc husing designed fr a mre cmpact and rbust shape, able t carry heavy lads and ensure a high precisin level f machining. High resistance materials are used: casting in lluminium ally EN 1706 - AC-AlSi10Mg T6 casting in cast irn EN-GJL-50 (UNI EN 1561) casting in spheridal graphite irn EN-GJS-500-7 (UNI EN 1563) casting in steel Fe G 60 (UNI 4010)

Screw jacks Materials and cmpnents Acme screws, prfile accrding t ISO 901... ISO 904 material: steel C 43 (UNI 7847) subjected t straightening prcess t ensure the regular alignment in peratin max. pitch errr ± 0.05 mm ver 300 mm thread length Threaded bars available n stck: ROLLED 1 start Tr 18 4 Tr 5 Tr 30 6 Tr 40 7 Tr 55 9 Tr 60 1 Tr 70 1 Tr 80 1 starts Tr 18 8 (P4) Tr 10 (P5) Tr 30 1 (P6) Tr 40 14 (P7) 1 1 start starts WHIRLED Tr 30 6 Tr 40 7 Tr 55 9 Tr 60 1 Tr 70 1 Tr 80 1 Tr 90 1 Tr 100 1 Tr 100 16 Tr 10 14 Tr 140 14 Tr 160 16 Tr 30 1 (P6) Tr 40 14 (P7) Tr 55 18 (P9) Tr 60 4 (P1) Tr 70 4 (P1) Tr 80 4 (P1) Tr 90 4 (P1) Tr 100 4 (P1) Tr 100 3 (P16) Tr 10 8 (P14) Tr 140 8 (P14) Tr 160 3 (P16) 3 starts Tr 30 18 (P6) Tr 40 1 (P7) Tr 55 7 (P9) Tr 60 36 (P1) Tr 70 36 (P1) Tr 100 48 (P16) 4 starts Tr 30 4 (P6) Tr 40 8 (P7) Tr 55 36 (P9) Tr 60 48 (P1) Tr 70 48 (P1) Tr 100 64 (P16) Brnze travelling nut, prfile accrding t ISO 901... ISO 904 material: brnze nut with 1-start thread brnze EN 198 - CuAl9-C brnze nut with multiple starts thread brnze EN 198 - CuSn1-C max. axial backlash with new travelling nut: (0.10... 0.1) mm Ball screws material: steel 4 CrM 4 r 50 CrM 4 (UNI EN 10083) Threaded bars available n stck: ROLLED, accuracy grade IT 7 BS 14 5 BS 16 5 BS 0 5 BS 5 5 BS 3 5 BS 40 10 BS 14 10 BS 5 6 BS 3 10 BS 40 0 WHIRLED, accuracy grade IT 3 - IT 5 BS 5 10 BS 3 0 BS 40 40 BS 0 5 BS 5 6 BS 3 10 BS 40 10 BS 50 10 BS 63 10 BS 80 16 BS 100 16 BS 0 0 BS 5 10 BS 3 0 BS 40 0 BS 50 0 BS 63 0 BS 3 3 BS 40 40 Ball nuts with flange DIN 69051 r with cylindrical flange material: steel 18 NiCrM 5 (UNI EN 10084) Ball nuts with ZERO backlash r preladed Threaded shafts with machined ends and nuts at custmer s drawing available n request. 3

Screw jacks Acme screw jacks 1 MA Series SERVOMECH acme screw jacks SJ Series travelling screw (Mdel A) travelling nut (Mdel B) travelling screw (Mdel A) travelling nut (Mdel B) MA 5 Tr 18 4 SJ 5 Tr 18 4 MA 10 Tr 5 SJ 10 Tr 5 MA 5 Tr 30 6 SJ 5 Tr 30 6 MA 50 Tr 40 7 SJ 50 Tr 40 7 MA 80 Tr 55 9 SJ 100 Tr 55 9 MA 100 Tr 60 1 SJ 150 Tr 60 1 MA 00 Tr 70 1 SJ 00 Tr 70 1 MA 350 Tr 100 16 SJ 50 Tr 80 1 SJ 300 Tr 90 1 SJ 350 Tr 100 1 SJ 400 Tr 100 1 SJ 600 Tr 10 14 SJ 800 Tr 140 14 SJ 1000 Tr 160 16 MA Series: SJ Series: high efficiency screw jacks standard perfrmances screw jacks 8 standard sizes 14 standard sizes with lad capacity frm 5 kn t 350 kn with lad capacity frm 5 kn t 1 000 kn Mdel A: travelling screw Mdel B: travelling nut 1- start acme screw 1- start acme screw frm Tr 18 4 t Tr 100 16 frm Tr 18 4 t Tr 160 16 -starts acme screw -starts acme screw frm Tr 18 8 (P4) t Tr 100 3 (P16) frm Tr 18 8 (P4) t Tr 160 3 (P16) Screw jacks MA Series Mdel A with travelling screw: 3- r 4-starts acme screws available 6 different input versins fr each size and rati Vers.1: single input shaft Vers.: duble free input shaft Vers.3: flange and hllw shaft input fr IEC mtr Vers.4: flange and hllw shaft input fr IEC mtr with secnd free input shaft Vers.5: Vers.1 + bell husing and cupling fr IEC mtr Vers.6: Vers. + bell husing and cupling fr IEC mtr lng-life synthetic il lubricated wrm gear lng-life synthetic grease lubricated wrm gear peratin with lw nise level max. input speed allwed with input speed up t 3 000 rpm 1 500 rpm suitable fr high linear speed cmpetitive in industrial applicatins and high duty cycle applicatins price/perfrmance : excellent rati wide range f accessries available 4

Screw jacks Ball screw jacks SERVOMECH ball screw jacks MA BS Series SJ BS Series travelling ball screw (Mdel A) travelling ball nut (Mdel B) travelling ball nut (Mdel B) 1 MA 5 BS 14 5 BS 0 5 BS 0 5 MA 5 SJ 5 BS 16 5 BS 5 6 BS 5 6 MA 10 BS 16 5 BS 5 6 BS 5 6 MA 10 SJ 10 BS 0 5 BS 3 5 BS 3 5 MA 5 BS 3 10; BS 3 0; BS 3 5; BS 3 10; BS 3 5; MA 5 SJ 5 BS 3 3 BS 3 0; BS 3 3 BS 3 10; BS 3 0 MA 50 BS 40 10; BS 40 0; BS 40 10; BS 40 0; MA 50 BS 40 40 BS 40 40 SJ 50 BS 40 10; BS 40 0 MA 80 BS 50 10; BS 50 0 SJ 100 BS 50 10; BS 50 0 MA 100 BS 50 10; BS 50 0; BS 63 10; BS 63 0 MA 100 BS 63 10; BS 63 0 SJ 150 BS 63 10; BS 63 0 MA 00 BS 80 16 MA 00 BS 80 16 BS 100 16 SJ 00 BS 80 16 MA 350 BS 100 16 MA 350 BS 100 16 SJ 50 BS 100 16 MA BS Series: high efficiency screw jacks, suitable fr cntinuus peratin als, duty cycle up t 100 %, input speed up t 3 000 rpm 8 standard sizes with lad capacity frm 5 kn t 350 kn Mdel A: travelling ball screw Mdel B: travelling ball nut ball screw frm BS 14 5 t BS 100 16 SJ BS Series: standard perfrmances screw jacks, Mdel B (travelling nut) available nly, duty cycle up t 70 %, input speed up t 1 500 rpm 8 standard sizes with lad capacity frm 5 kn t 50 kn Mdel B: travelling ball nut ball screw frm BS 0 5 t BS 100 16 6 different input versins fr each size and rati Vers.1: single input shaft Vers.: duble free input shaft Vers.3: flange and hllw shaft input fr IEC mtr Vers.4: flange and hllw shaft input fr IEC mtr with secnd free input shaft Vers.5: Vers.1 + bell husing and cupling fr IEC mtr Vers.6: Vers. + bell husing and cupling fr IEC mtr lng-life synthetic il lubricated wrm gear lng-life synthetic grease lubricated wrm gear wide range f accessries available NOTE: Perfrmances, features and dimensins f ball screw jacks and ball screws are quted in the specific catalgues: catalgue Ball screw jacks, catalgue Ball screws and nuts. 5

Screw jacks 1 Mdels Bth MA and SJ Series screw jacks are available in tw mdels: with travelling screw (Mdel A) with travelling nut (Mdel B) The chice f the mdel depends n the cnfiguratin and requirements f the applicatin. The perfrmances are in general the same fr bth mdels. SERVOMECH screw jacks can be perated in vertical r hrizntal planes, r angles in-between. Input ptins available: free shaft, duble free shaft, mtr flange with r withut secnd shaft. travelling ball screw (Mdel A) travelling ball nut (Mdel B) The brnze nut is integral with the wrm wheel. The linear mtin is given by the acme screw being driven thrugh the centre f the wrm wheel. In peratin, the screw des nt rtate. Space must be available n bth screw jacks sides fr the screw t prtrude belw the gear husing. The acme screw is fixed t the wrm wheel. In peratin the screw rtates with the wrm wheel at the same speed, driving the brnze nut up and dwn. The linear mtin f the nut is pssible nly if the reacting trque is applied, aviding the integral rtatin with the acme screw. Optins: prtective tube prtective bellws safety brnze nut varius screw end fixings strke end switches anti-turn device wear indicatr switch adjustable backlash stp nut trunnin munting stainless steel acme screw brnze guides Optins: prtective bellws safety brnze nut wear indicatr switch adjustable backlash stainless steel acme screw trunnin munting travelling nut travelling nut at custmer s drawing 6

Screw jacks Versins INPUT SHAFT ROTATION SCREW OR NUT LIFTING DIRECTION 1 Mdel A Mdel B INPUT VERSIONS Vers.1 Vers. Vers.3 Vers.4 Vers.5 Vers.6 Vers.1: single input shaft Vers.: duble free input shaft Vers.3: flange and hllw shaft input fr IEC mtr Vers.4: flange and hllw shaft input fr IEC mtr with secnd free input shaft Vers.5: Vers.1 + bell husing and cupling fr IEC mtr Vers.6: Vers. + bell husing and cupling fr IEC mtr SCREW JACK MOUNTING POSITIONS UPWARD (U) DOWNWARD (D) HORIZONTAL (H) RIGHT-HAND (RH) LEFT-HAND (LH) RIGHT-HAND (RH) LEFT-HAND (LH) RIGHT-HAND (RH) LEFT-HAND (LH) 7

Screw jacks 1 Screw jacks selectin criteria Screw jacks transfrm a rtary mvement int a linear mvement. Due t the screw-nut efficiency, this transfrmatin implies a lss f energy depending n the screw and the nut type which is in inverse relatin t their efficiency. Therefre, the energy lss is higher with 1-start acme screw and nut when cmpared with - r mre starts acme screw and nut. Therefre t select the right screw jack suitable fr an applicatin, it is necessary t cnsider the duty cycle required by the applicatin F u [%] and cmpare it t the duty cycle that the screw jack can perfrm F i [%]. The applicatin duty cycle F u [%] required is the rati between the wrking time under lad required by the applicatin during a reference time perid and the reference time perid itself, expressed in percentage. Wrking time during reference time perid T F [%] = Reference time perid T [min] T rif - reference time perid, expressed in minutes: T ref = 10 minutes fr shrt, but frequent wrking cycles T ref = 1 hur (60 min) fr lng, but infrequent wrking cycles The screw jack duty cycle F i [%] allwed is the percentage f time referred t the reference time perid T ref during which the screw jack can perate under maximum lad cnditins - stated in this catalgue - at 5 C envirnment temperature, t avid the risk f internal parts verheating. Therefre, the main limit t the wrking time f screw jacks is ften due t the thermal pwer limits and nt t the maximum permissible perating mechanical pwer. The screw jack duty cycle F i [%] is related t the maximum permissible pwer. If the pwer required by the applicatin is lwer than the maximum permissible pwer, than the screw jack can be used with a higher duty cycle. [min] rif u rif 100 / max MA Series SJ Series - Pwer required by the applicatin max - Screw jack s max permissible pwer (see perfrmances tables) Screw jack duty cycle [%] ver 10 min If the envirnment temperature is higher than 5 C, the screw jack duty cycle F i [%] has t be reduced by applying a crrectin factr f T as per the fllwing frmula: where: 80 T [ C] f T = 55 T [ C] - envirnment temperature, expressed in degree Celsius If the envirnment temperature increases, the permissible duty cycle f the screw jack F i [%] is reduced. 8

Screw jacks In rder t make a crrect screw jack selectin, we recmmend the fllwing selectin prcedure: 1. Mdel: - Mdel A travelling screw - Mdel B travelling nut. SERVOMECH screw jack series: - MA Series: high efficiency screw jack with acme screw, il lubricated - SJ Series: standard perfrmances screw jack with acme screw, grease lubricated 3. Screw jack size: - Pull r push lad - Strke - Linear speed - Pwer required 4. Input versin: - Vers.1: single free input shaft - Vers.: duble free input shaft - Vers.3: flange and hllw shaft input fr IEC mtr - Vers.4: flange and hllw shaft input fr IEC mtr with secnd free input shaft - Vers.5: Vers.1 + bell husing and cupling fr IEC mtr - Vers.6: Vers. + bell husing and cupling fr IEC mtr 5. Screw jack munting psitin: - Upward U - Dwnward D - Hrizntal H - Right-hand RH - Left-hand LH 6. Accessries required 1 Screw jack selectin The screw jack selectin is the last step f a mre cmplex glbal lifting-system selectin prcedure, where the verall dimensins and safety requirements f the applicatin have t be cnsidered as an integral part f that selectin. In this sectin we nly fcus n a single screw jack selectin. Yu will find mre exhaustive cmments and recmmendatins n the screw jacks cmplete lifting system chapter. 1. Screw jack mdel selectin: all SERVOMECH screw jacks versins and sizes are available in tw different mdels: - Mdel A travelling screw - Mdel B travelling nut The chice between the tw different mdels nly depends n the cnfiguratin and munting details f the applicatin. In case f Mdel B (rtating screw and external translating nut) selectin, we recmmend t pay attentin t the fllwing: - screw and nut lubricatin - acme screw prtectin - nly axial lad can be applied n the translating nut referred t the rtating acme screw axis - rtating screw end, especially in case f lng strke length and push lad - ff-set r radial lad applied n the nut may lead t dangerus misalignment between screw and nut, s it is nt permitted. If present, it must be supprted by an apprpriate, suitable slutin. 9

Screw jacks 1. SERVOMECH screw jacks series: The screw jack s duty cycle and the duty cycle required by the applicatin F u [%] are the mst imprtant factrs in chsing between the tw available screw jacks series, as previusly described. The duty cycle required by the applicatin F u [%] has t be lwer than r equal t the wrking duty cycle rating the screw jack can perfrm F i [%], inclusive the envirnment temperature crrectin factr (f T ): F u [%] F i [%] Here belw are values f the max. duty cycle F i [%] at 5 C envirnment temperature fr the SERVOMECH screw jacks series: Duty cycle allwed F i [%] MA Series SJ Series F i [%] ver 10 min time perid 40 % 30 % F i [%] ver 1 hur time perid 30 % 0 % Lifting Systems Usually, a screw jack lifting system is cmpsed f several lifting pints (see examples n pages 94-95). Screw jack s psitin and number depend n applicatin requirements as: - dimensin and surface f the platfrm r plane - required strke length - ttal lifting lad (dynamic lad) - lifting system cnfiguratin, guided r nt guided lad Furthermre, specific applicatin prject requirements may als influence the selectin. A new lifting system prject can be very cmplex and therefre it requires the clever evaluatin f many different technical and applicatin details, in rder t prvide a functinal, safe and cmpetitive slutin. Here are sme suggestins that can help the lifting system s designer n his prject evaluatins. Static safety: Firstly, the required r desired safety level has t be cnsidered. On screw jack prduct, there are n regulatins n the matter f safety standards and technical data declared n catalgue. Many manufacturers d nt use the same safety factrs n their technical calculatins and als the materials may be different. We recmmend a full evaluatin f all screw jack cmpnents. Dimensins, uter diameter and lead f screw thread are nt enugh fr a cmplete evaluatin. It is als imprtant t evaluate the wrm gear in terms f: - centre distance, verall dimensins and ttal weight - axial bearings: type and size - nut: material and dimensins Nrms and rules: In case, be sure t cnsider all nrms and rules which the prject must cmply with. This can significantly affect the final slutin. Nise and vibratins: Fr applicatins which require a lw and cntrlled nise level, we recmmend a slutin which allws, with same final perfrmances, a lwer input speed fr the cnnecting shaft. This will help t reduce r eliminate als vibratins r dangerus input speeds fr the cnnecting shafts. 10

Screw jacks Example: lifting stages fr theatres, lecture r cncert hall: - mtr speed reduced t max. (300... 400) rpm - use f bevel gearbxes with rati 1 : 1 - balanced cnnecting shafts, well aligned and supprted, max. nn-supprted length (... 3) m - SERVOMECH screw jacks with rati RV (high linear speed) and multiplied starts acme screw Hanging lad: Auxiliary safety nuts are available t cmply with nrms and rules abut hanged lads with presence f persnnel fr maintenance. Self-lcking: Generally, the statically self-lcking cnditin f the lifting system can be achieved by using a 1-start acme screw jack. Smetimes, t cmply with sme nrms and rules, a certain mechanical selflcking cnditin can nly be achieved by a lwer than 4 helix angle acme screw with a lead smaller than the standard. Thse special executins are available n request. 1 Psitining (stpping) accuracy: The psitining (stpping) accuracy can be achieved by using brakemtrs r frequency inverters t cntrl speed and acceleratin and deceleratin ramps, especially in case f dwnward mving lads. Operating safety: Different safety devices can als be cnsidered r requested fr the applicatin: - mechanical safety: safety nut, mechanical stp f the lad; - electric r electrnic safety: wear cntrl f the wrking nut t check the distance between wrking and safety nut; speed cntrl f the cnnecting shaft; rtatin detectin f the wrm wheel; cntrl f max. pwer r current required fr the lifting system. Lad inertia: If the lad has t be rapidly accelerated r decelerated, in applicatins with high linear speed, we recmmend t use an apprpriate drive t cntrl the acceleratin and deceleratin ramps (fr example, frequency inverter fr AC 3-phase mtrs r duble plarity mtrs and sft-start devices). Guided lad: In case f applicatins with large dimensins, high lads and lng strkes, we recmmend t evaluate the pssibility t guide the lad. If the lad is guided, a smaller screw diameter may be selected and cnsequently a cheaper screw jacks can be used, whilst maintaining the same functinality and static lad capability. This means a cst effective final slutin fr the prject. Screw jacks with increased acme screw diameter, if the static resistance is mre significant than the dynamic applicatin cnditins fr lifting systems: - lng strke with medium static push lad - medium strkes with high static push lad SERVOMECH screw jacks with increased diameter acme screw are available t ffer a mre cst effective slutin. Fr assistance in selecting lifting systems and linear mtin devices, SERVOMECH Engineering Dpt. is available t supprt yu free f charge. 11

Screw jacks Self-lcking 1 An acme screw jack is in self-lcking cnditin when: a push r pull lad applied n a nt wrking screw jack des nt start the linear mvement (static self-lcking cnditin); by interrupting the mtr pwer supply f a wrking screw jack with push r pull lad, the mvement stps (dynamic self-lcking cnditin). Self-lcking and back-driving cnditins are defined in the fllwing 4 situatins: 1) Static self-lcking: nt running screw jack withut lad vibratins; the applicatin f a push r pull frce (until the maximum allwed) des nt cause the linear mvement f the acme screw (Mdel A) r f the travelling brnze nut (Mdel B). This cnditin happens when the direct efficiency value 1) is lwer than 0.30. ) Dynamic self-lcking: Wrking screw jack with a lad ppsite the mtin: by interrupting the mtr pwer supply the screw jack stps. This cnditin happens when the direct efficiency value 1) is lwer than 0.5. Wrking screw jack with a lad applied n the same directin f the mtin: the screw jack s stp is nt guaranteed by interrupting the mtr pwer supply. The screw jack stps nly if the direct efficiency value 1) is lwer than 0.0 and, anyway, it stps in an unrepeatable psitin. In this case, we recmmend t use a brake mtr t stp the lad and keep it in psitin, aviding the mtin start in case f pushes r vibratins. 3) Uncertain self-lcking: with direct efficiency values 1) between 0.30 and 0.50, the screw jacks are in an uncertain self-lcking cnditin. The self-lcking depends n the lad and the inertia f the system. In this case we recmmend t use a brake mtr t guarantee the self-lcking cnditin r t cntact SERVOMECH Engineering Dpt. t evaluate the applicatin. 4) Back-driving: screw jacks with direct efficiency value 1) higher than 0.50 are never self-lcking. We remind yu that, in any case, als t start a nt self-lcking screw jack a certain minimum lad must be applied. T define this lad value please cntact SERVOMECH Engineering Dpt. SELF-LOCKING UNCERTAIN SELF-LOCKING BACK-DRIVING 0 0.3 0.5 1 1) The direct efficiency values are shwn in the relative tables (see pages 36, 61 and 67). 1

Screw jacks Acme screw buckling One f the mst imprtant screw jack selectin criteria is the buckling resistance f the acme screw. Buckling limits are relevant fr push lad nly. SERVOMECH cnsiders three cases: Euler I: screw jack husing firmly fixed t the base free travelling acme screw end screw jack husing firmly fixed t the base free travelling nut Euler II: screw jack husing and travelling acme screw end fixed t pivting supprts screw jack husing and travelling nut fixed t pivting supprts Euler III: screw jack husing firmly fixed t the base guided travelling acme screw end screw jack husing firmly fixed t the base guided travelling nut Fllwing diagrams (knwn as Euler curves) shw the max. push lad admitted n the acme screw, cnsidering a safety factr against buckling equal t 4. Fr mre accurate evaluatin in case f particular applicatin requirements, critical fr safety reasns (e.g. theatre lifts), cntact SERVOMECH Engineering Dpt. Euler I: screw jack husing firmly fixed t the base - free travelling acme screw end screw jack husing firmly fixed t the base - free travelling nut Example: T suit a push lad f 60 kn applied n an acme screw 1 000 mm lng, the right screw size is Tr 70 1 munted n a screw jack MA 00 r SJ 00. Lad [kn] 1000 900 800 700 600 500 400 1 300 00 100 90 80 70 60 50 40 Tr 160 16 Tr 140 14 30 0 Tr 10 14 10 9 8 7 6 5 4 3 Tr 18 4 Tr 5 Tr 30 6 Tr 40 7 Tr 55 9 Tr 60 1 Tr 100 1 Tr 100 16 Tr 90 1 Tr 80 1 Tr 70 1 Euler I Safety factr: 4 1 0.1 0. 0.3 0.4 0.5 0.8 1 3 4 5 6 Acme screw length, L [m] 13

Screw jacks Acme screw buckling 1 Euler II: screw jack husing and travelling acme screw end fixed t pivting supprts screw jack husing and travelling nut fixed t pivting supprts Example: T suit a push lad f 0 kn applied n an acme screw 1 000 mm lng, the right screw size is Tr 40 7 munted n a screw jack MA 50 r SJ 50. Lad [kn] 1000 900 800 700 600 500 400 300 Tr 160 16 00 Tr 140 14 100 90 80 70 60 50 40 30 0 Tr 10 14 Tr 100 1 Tr 100 16 Tr 90 1 Tr 80 1 10 9 8 7 6 5 4 3 Tr 18 4 Tr 5 Tr 30 6 Tr 40 7 Tr 70 1 Tr 60 1 Tr 55 9 Euler II Safety factr: 4 1 0.1 0. 0.3 0.4 0.5 0.8 1 3 4 5 6 Acme screw length, L [m] 14

Screw jacks Acme screw buckling Euler III: screw jack husing firmly fixed t the base - guided travelling acme screw end screw jack husing firmly fixed t the base - guided travelling nut Example: T suit a push lad f 100 kn applied n an acme screw 3 000 mm lng, the right screw size is Tr 80 1 munted n a screw jack SJ 50. 1 Lad [kn] 1000 900 800 700 600 500 400 300 Tr 160 16 Tr 140 14 00 Tr 10 14 100 90 80 70 60 50 40 30 Tr 100 1 Tr 100 16 Tr 90 1 Tr 80 1 0 Tr 70 1 10 9 8 7 6 5 4 3 Tr 18 4 Tr 5 Tr 30 6 Tr 60 1 Tr 55 9 Euler III Safety factr: 4 1 0.1 0. 0.3 0.4 0.5 0.8 1 3 4 5 6 Acme screw length, L [m] Tr 40 7 15

1 Screw jacks Critical rtating speed f acme screw Fr travelling nut (Mdel B) screw jacks, the acme screw rtating speed must nt reach the first critical speed f the screw itself, which depends n the thread diameter and lead, screw length and type f the screw end supprt. Free acme screw end Example: Fr a screw jack SJ 150 with acme screw Tr 60 1 (1-start r mre) m lng with free end, the max. allwed rtating speed is 40 rpm. With a 1-start thread, this rtating speed is equivalent t a linear speed f 85 mm/s. n max = 39 10 5 0.9 d L min d min [mm] - min. thread diameter (fr a thread Tr d P: d min = d - P) L [mm] - acme screw length 10 1 3 4 5 6 7 8 9 11 1 13 14 Acme screw rtating speed [g/min] 1000 900 800 700 600 500 450 400 350 300 50 00 150 100 0.6 0.7 0.8 0.9 1 1.5.5 3 3.5 4 4.5 5 6 Acme screw length, L [m] 1 - Tr 18 4 4 - Tr 40 7 7 - Tr 70 1 10 - Tr 100 16 13 - Tr 140 14 - Tr 5 5 - Tr 55 9 8 - Tr 80 1 11 - Tr 100 1 14 - Tr 160 16 3 - Tr 30 6 6 - Tr 60 1 9 - Tr 90 1 1 - Tr 10 14 16

Screw jacks ATTENTION! In case f hrizntal munting, an acme screw static deflectin, caused by its weight and pssibly aggravated by the presence f the push lad, shuld always be cnsidered. Therefre, we recmmend an accurate evaluatin and use f a screw supprting system n tw nut sides, integral and travelling with the nut itself; this will ensure the crrect alignment and cncentricity between the screw and the nut. In case f dubts, please cntact SERVOMECH Engineering Dpt. Supprted acme screw end Example: Fr a screw jack MA 50 with acme screw Tr 40 7 (1-start r mre) 3 m lng with supprted end, max. allwed rtating speed is 550 rpm. With a 1-start thread, this rtating speed is equivalent t a linear speed f 64 mm/s. 1 n max = 39 10 5 3.8 d L min d min [mm] - min. thread diameter (fr a thread Tr d P: d min = d - P) L [mm] - acme screw length 10 1 3 4 5 6 7 8 9 11 1 13 14 Acme screw rtating speed [g/min] 1000 900 800 700 600 500 450 400 350 300 50 00 150 100 0.6 0.7 0.8 0.9 1 1.5.5 3 3.5 4 4.5 5 6 Acme screw length, L [m] 1 - Tr 18 4 4 - Tr 40 7 7 - Tr 70 1 10 - Tr 100 16 13 - Tr 140 14 - Tr 5 5 - Tr 55 9 8 - Tr 80 1 11 - Tr 100 1 14 - Tr 160 16 3 - Tr 30 6 6 - Tr 60 1 9 - Tr 90 1 1 - Tr 10 14 17

Screw jacks MA Series Screw jacks MA Series with travelling screw (Md.A) STRUCTURAL ELEMENTS 1 10 11 8 7 6 1 3 13 4 9 14 8 11 10 5 6 7 1 - acme screw in steel C 43 (UNI 7847), whirled thread - wrm shaft with true invlute, grund wrm prfile ZI (UNI 4760), made in steel, case-hardened 3 - brnze wrmwheel with true invlute prfile ZI (UNI 4760), the length f the internal nut is duble respect t SJ Series; the bigger mass f the brnze nut allws a higher duty cycle and a lnger life 4 - thrust ball bearing fr high lad capacity 5 - gear bx shape which allws effective heat dissipatin giving increased duty cycle 6 - radial guide f the wrmwheel fr increased stiffness and imprved efficiency 7 - raised cver with brnze guide against radial lad fr acme screw; the raised cver may als be used as a spigt diameter 8 - grub screw which prevents the threaded cver unscrewing 9 - synthetic il lubricated wrm gearbx fr a better heat dissipatin; this allws higher input speed, imprved efficiency and lnger life 10 - radial lubricant seal 11 - O-Ring as lubricant seal 1 - breather 13 - il level plug 14 - il drain plug 18

Screw jacks MA Series Screw jacks MA Series with travelling nut (Md.B) STRUCTURAL ELEMENTS 1 16 17 14 5 4 11 13 18 3 19 15 9 6 14 0 17 16 8 7 1 1 - acme screw in steel C 43 (UNI 7847), whirled thread - brnze travelling nut with flange 3 - wrm shaft with true invlute, grund wrm prfile ZI (UNI 4760), made in steel, case-hardened 4 - brnze wrmwheel with true invlute prfile ZI (UNI 4760) 5 - cast irn supprt f the wrmwheel brnze rim 6 - acme screw fixed t the wrmwheel thrugh the cylindrical centring part and LEFT-HAND (fr push lad) r RIGHT-HAND (fr pull lad) metric thread 7 - lck nut with the ppsite directin metric thread t ensure safe acme screw fixing 8 - acme screw wrmwheel pins against unscrewing 9 - thrust ball bearing fr high lad capacity 10 - gear bx 11 - lw cver 1 - raised cver; may als be used as a spigt diameter 13 - radial brnze guide f the wrmwheel, fr increased stiffness and imprved efficiency 14 - grub screw which prevents the threaded cver unscrewing 15 - synthetic il lubricated wrm gearbx 16 - radial lubricant seal 17 - O-Ring as lubricant seal 18 - breather 19 - il level plug 0 - il drain plug 10 13 19

Screw jacks MA Series Screw jacks MA Series with 1-start acme screw TECHNICAL SPECIFICATIONS SCREW JACK SIZE MA 5 MA 10 MA 5 MA 50 Lad capacity [kn], (push - pull) 5 10 5 50 1-start acme screw Tr 18 4 Tr 5 Tr 30 6 Tr 40 7 Wrm gear centre distance [mm] 30 40 50 63 RV 1 : 4 (4 : 16) 1 : 5 (4 : 0) 1 : 6 (4 : 4) 1 : 7 (4 : 8) Available rati RN 1 : 16 ( : 3) 1 : 0 1 : 18 ( : 36) 1 : 14 ( : 8) RL 1 : 4 1 : 5 1 : 4 1 : 8 RV1 1 1 1 1 Strke [mm] fr 1 input shaft revlutin Starting efficiency Rati Rati RN1 0.5 0.5 0.33 0.5 RL1 0.17 0. 0.5 0.5 RV1 0.1 0. 0.0 0.18 RN1 0.16 0.15 0.16 0.15 RL1 0.13 0.14 0.13 0.11 RV1 0.40 0.41 0.38 0.37 Running efficiency at 3000 rpm ( 1 ) Rati RN1 0.31 0.30 0.30 0.3 RL1 0.7 0.8 0.8 0.6 RV1 3.8 7. 19.9 44.1 Starting trque n input shaft at max. lad [] Rati RN1 1..6 8.3 4.8 RL1 1.0.3 7.6 18.0 Max. permissible perating pwer ( ) [] Rati RV1 0.40 0.60 1..4 RN1 0.0 0.30 0.7 1.7 RL1 0.17 0.5 0.6 1. Reactive trque n acme screw (nut) required at max. lad [] 8 0 65 165 Gear bx material casting in aluminium ally EN 1706 - AC-AlSi10Mg T6 casting in spheridal graphite irn EN-GJS-500-7 (UNI EN 1563) Mass f screw jack withut acme screw [kg]. 4.3 13 6 Mass fr every 100 mm f acme screw [kg] 0.16 0.3 0.45 0.8 ( 1 ) - efficiency figures at different input speed n page 36 ( ) - THERMAL limit, referred t fllwing wrking cnditins duty cycle 40 % ver 10 min time perid (30 % ver 1 hur time perid) fr screw jacks with travelling screw (Md.A) duty cycle 30 % ver 10 min time perid (0 % ver 1 hur time perid) fr screw jacks with travelling nut (Md.B) at 5 C envirnment temperature 0

Screw jacks MA Series MA 80 MA 100 MA 00 MA 350 SCREW JACK SIZE 80 100 00 350 Lad capacity [kn], (push - pull) Tr 55 9 Tr 60 1 Tr 70 1 Tr 100 16 1-start acme screw 63 80 100 15 Wrm gear centre distance [mm] 1 : 7 (4 : 8) 1 : 8 (4 : 3) 1 : 8 (4 : 3) 3 : 3 RV Screw jacks MA Series with 1-start acme screw TECHNICAL SPECIFICATIONS 1 : 14 ( : 8) 1 : 4 1 : 4 1 : 16 ( : 3) RN Available rati 1 : 8 1 : 3 1 : 3 1 : 3 RL 1.8 1.5 1.5 1.5 RV1 0.64 0.5 0.5 1 RN1 0.3 0.38 0.38 0.5 RL1 0.18 0.0 0.17 0.16 RV1 0.15 0.13 0.1 0.14 RN1 Rati Rati Strke [mm] fr 1 input shaft revlutin Starting efficiency 0.11 0.1 0.11 0.10 RL1 0.39 0.41 0.38 0.39 RV1 0.33 0.3 0.31 0.34 RN1 0.7 0.30 0.8 0.9 RL1 Rati Running efficiency at 3000 rpm ( 1 ) 77 10 8 55 RV1 47 6 133 400 RN1 34 50 109 80 RL1 Rati Starting trque n input shaft at max. lad [].5 3.0 4.5 8.0 RV1 1.8.6 4.0 7.0 RN1 1..3 3.8 6.8 RL1 Rati Max. permissible perating pwer ( ) [] 368 55 1180 880 casting in spheridal graphite irn EN-GJS-500-7 (UNI EN 1563) Reactive trque n acme screw (nut) required at max. lad [] Gear bx material 6 48 75 145 Mass f screw jack withut acme screw [kg] 1.6 1.8.5 5. Mass fr every 100 mm f acme screw [kg] ( 1 ) - efficiency figures at different input speed n page 36 ( ) - THERMAL limit, referred t fllwing wrking cnditins duty cycle 40 % ver 10 min time perid (30 % ver 1 hur time perid) fr screw jacks with travelling screw (Md.A) duty cycle 30 % ver 10 min time perid (0 % ver 1 hur time perid) fr screw jacks with travelling nut (Md.B) at 5 C envirnment temperature 1

Screw jacks MA Series - 1-start acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk at 5 C envirnment temperature and max. duty cycle f: 40 % ver 10 min time perid r 30 % ver 1 hur time perid, fr screw jacks with travelling screw (Md.A), 30 % ver 10 min time perid r 0 % ver 1 hur time perid, fr screw jacks with travelling nut (Md.B) ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. MA 5 5 kn 4 kn 3 kn 1 kn RV1 RN1 RL1 MA 10 10 kn 8 kn 6 kn kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 3 000 50 1.5 10 3.9 1. 1.3 0.4 1.1 0.36 3.1 0.89 1.1 0.33 0.9 0.9.3 0.73 0.8 0.5 0.7 0.1 0.8 0.4 0.3 0.08 0. 0.07 1 500 5 6.3 5 4.4 0.68 1.4 0.3 1. 0.19 3.5 0.55 1.1 0.18 0.9 0.15.6 0.41 0.9 0.13 0.7 0.11 0.9 0.14 0.3 0.04 0. 0.04 1 000 16.7 4. 3.3 4.6 0.48 1.5 0.16 1. 0.13 3.6 0.38 1. 0.13 1.0 0.10.7 0.9 0.9 0.09 0.7 0.08 0.9 0.10 0.3 0.03 0. 0.03 750 1.5 3.1.5 4.7 0.37 1.6 0.1 1.3 0.10 3.8 0.30 1. 0.10 1.0 0.08.8 0. 0.9 0.07 0.8 0.06 0.9 0.07 0.3 0.0 0. 0.0 500 8.3.1 1.7 5.0 0.6 1.6 0.09 1.4 0.07 4.0 0.1 1.3 0.07 1.1 0.06 3.0 0.16 1.0 0.05 0.8 0.04 1.0 0.05 0.3 0.0 0.3 0.01 300 5 1.3 1 5.1 0.16 1.8 0.05 1.5 0.05 4.1 0.13 1.4 0.04 1. 0.04 3.1 0.10 1.1 0.03 0.9 0.03 1.0 0.03 0.3 0.01 0.3 0.01 100 1.7 0.4 0.3 5.5 0.06.0 0.0 1.6 0.0 4.4 0.05 1.6 0.0 1.3 0.01 3.3 0.03 1. 0.01 1.0 0.01 1.1 0.01 0.4 0.01 0.3 0.01 MA 50 50 kn 35 kn 5 kn 10 kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 3 000 50 1.5 8.3.0 0.63 0.7 0.0 0.5 0.15 1.6 0.50 0.5 0.16 0.4 0.1 1. 0.38 0.4 0.1 0.3 0.09 0.4 0.13 0.1 0.04 0.1 0.03 1 500 5 6.3 4.. 0.35 0.7 0.11 0.5 0.08 1.8 0.8 0.6 0.09 0.4 0.07 1.3 0.1 0.4 0.07 0.3 0.05 0.4 0.07 0.1 0.0 0.1 0.0 1 000 16.7 4..8.3 0.4 0.7 0.08 0.6 0.06 1.9 0.0 0.6 0.06 0.4 0.05 1.4 0.15 0.4 0.05 0.3 0.03 0.5 0.05 0.1 0.01 0.1 0.01 750 1.5 3.1.1.4 0.19 0.7 0.05 0.6 0.05 1.9 0.15 0.6 0.05 0.5 0.04 1.4 0.11 0.4 0.04 0.3 0.03 0.5 0.04 0.1 0.01 0.1 0.01 500 8.3.1 1.4.5 0.13 0.8 0.04 0.6 0.03.0 0.11 0.6 0.03 0.5 0.03 1.5 0.08 0.5 0.0 0.4 0.0 0.5 0.03 0.1 0.01 0.1 0.01 300 5 1.3 0.8.6 0.08 0.8 0.03 0.7 0.0.1 0.07 0.7 0.0 0.5 0.0 1.6 0.05 0.5 0.0 0.4 0.01 0.5 0.0 0. 0.01 0.1 0.01 100 1.7 0.4 0.3.8 0.03 0.9 0.01 0.8 0.01. 0.0 0.7 0.01 0.6 0.01 1.7 0.0 0.5 0.01 0.5 0.01 0.6 0.01 0. 0.01 0.1 0.01 MA 5 5 kn 0 kn 15 kn 10 kn RV1 RN1 RL1 3 000 50 5 1.5 1.4 3.91 7.7.40 15.1 4.73 8.7.73 5.4 1.68 10.8 3.38 6. 1.95 3.8 1.0 4.3 1.35.5 0.78 1.5 0.48 1 500 5 1.5 6.3 5.0 3.9 14.4.6 8.5 1.34 17.5.74 10.0 1.58 6.0 0.94 1.5 1.96 7. 1.13 4.3 0.67 5.0 0.78.9 0.45 1.7 0.7 1 000 16.7 8.3 4. 6.5.78 13.3 1.60 9.1 0.96 18.6 1.94 10.7 1.1 6.4 0.67 13.3 1.39 7.6 0.80 4.6 0.48 5.3 0.56 3.1 0.3 1.8 0.19 750 1.5 6.3 3.1 7.4.15 16.0 1.5 9.5 0.74 19. 1.51 11.1 0.87 6.6 0.5 13.7 1.08 7.9 0.6 4.7 0.37 5.5 0.43 3. 0.5 1.9 0.15 500 8.3 4..1 8.8 1.51 16.4 0.86 10.0 0.5 0. 1.06 11.5 0.60 7.0 0.37 14.4 0.75 8. 0.43 5.0 0.6 5.8 0.30 3.3 0.17.0 0.11 300 5.5 1.3 30.5 0.96 17.4 0.55 10.8 0.34 1.3 0.67 1. 0.38 7.6 0.4 15. 0.48 8.7 0.7 5.4 0.17 6.1 0.19 3.5 0.11.1 0.07 100 1.7 0.8 0.4 33.0 0.35 19.3 0.0 1.5 0.13 3.1 0.4 13.5 0.14 8.8 0.09 16.5 0.17 9.7 0.10 6.3 0.07 6.6 0.07 3.9 0.04.5 0.03 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 3 000 50 16.7 1.5 3.5 1.11 3.6 1.1 8.4.63 3.5 1.11.8 0.89 6.3 1.97.7 0.83.1 0.67 4.6 0.74 1.9 0.30 1.6 0.5 1 500 5 8.3 6.3 11.7 1.83 4.8 0.76 3.9 0.61 9.3 1.47 3.9 0.60 3.1 0.49 7.0 1.10.9 0.45.3 0.37 4.8 0.5.0 0.1 1.6 0.18 1 000 16.7 5.6 4. 1. 1.8 5.0 0.53 4.1 0.43 9.8 1.03 4.0 0.4 3.3 0.34 7.3 0.77 3.0 0.3.5 0.6 5.0 0.40.1 0.16 1.7 0.14 750 1.5 4. 3.1 1.7 1.00 5. 0.41 4. 0.33 10. 0.80 4. 0.33 3.4 0.7 7.6 0.60 3.1 0.4.5 0.0 5.4 0.8. 0.1 1.8 0.10 500 8.3.8.1 13.5 0.71 5.5 0.9 4.5 0.4 10.8 0.56 4.4 0.3 3.6 0.19 8.1 0.4 3.3 0.17.7 0.14 5.6 0.09.4 0.08.0 0.06 300 5 1.7 1.3 14.1 0.44 5.8 0.18 4.8 0.15 11.3 0.35 4.6 0.15 3.9 0.1 8.5 0.7 3.5 0.11.9 0.09 6.0 0.06.6 0.03. 0.03 100 1.7 0.6 0.4 15.1 0.16 6.5 0.07 5.5 0.06 1.1 0.13 5. 0.05 4.4 0.05 9.0 0.09 3.9 0.04 3.3 0.03 3. 0.04.8 0.0.4 0.01

Screw jacks MA Series - 1-start acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk at 5 C envirnment temperature and max. duty cycle f: 40 % ver 10 min time perid r 30 % ver 1 hur time perid, fr screw jacks with travelling screw (Md.A), 30 % ver 10 min time perid r 0 % ver 1 hur time perid, fr screw jacks with travelling nut (Md.B) ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. MA 80 80 kn 60 kn 40 kn 0 kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 3 000 64.3 3.1 16.1 1.7 4.00 7.6.39 1 0.6 3.33 6.4.00 3.8 1.0 1 500 3.0 16.0 8.0 18.0.83 36.7 5.76 1.5 3.37 13.5.1 4.5 3.84 14.3.5 9.0 1.41 1. 1.9 7. 1.1 4.5 0.71 1 000 1.4 10.7 5.3 5.6 5.51 31.3 3.8 0.0.09 39.5 4.13 3.5.46 15.0 1.57 6.3.76 15.7 1.64 10.0 1.05 13. 1.38 7.8 0.8 5.0 0.5 750 16.1 8.0 4.0 54.7 4.30 33.8.65 1.0 1.65 41.0 3. 5.3 1.99 15.8 1.4 7.4.15 16.9 1.3 10.5 0.8 13.7 1.07 8.4 0.66 5.3 0.41 500 10.7 5.3.7 58.6 3.07 35.8 1.87.0 1.15 44.0.30 6.9 1.41 16.5 0.86 9.3 1.53 17.9 0.94 11.0 0.58 14.7 0.77 9.0 0.47 5.5 0.9 300 6.4 3. 1.6 65.9.07 38.1 1.0 4.5 0.77 49.4 1.55 8.6 0.90 18.4 0.58 33.0 1.03 19.1 0.60 1.3 0.38 16.5 0.5 9.5 0.30 6.1 0.19 100.1 1.1 0.5 73. 0.77 44.4 0.47 8.5 0.30 54.9 0.57 33.3 0.35 1.4 0. 36.6 0.38. 0.3 14.3 0.15 18.3 0.19 11.1 0.1 7.1 0.07 MA 100 100 kn 80 kn 50 kn 0 kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 3 000 75 5 18.8 15.9 5.00 1.4 3.91 10.0 3.1 11.6 3.66 5.0 1.56 4.0 1.5 1 500 37.5 1.5 9.4 8. 4.43.5 3.54.6 3.55 18.0.83 33. 5. 14.1. 11.3 1.77 13.3.09 5.6 0.89 4.5 0.71 1 000 5 8.3 6.3 70.8 7.4 30.0 3.14 4.1.5 56.7 5.93 4.0.5 19..0 35.4 3.71 15.0 1.57 1.0 1.6 14. 1.48 6.0 0.63 4.8 0.50 750 18.8 6.3 4.7 73.5 5.77 31.3.46 5.3 1.99 58.8 4.61 5.1 1.97 0. 1.59 36.7.88 15.7 1.3 1.6 0.99 14.7 1.15 6.3 0.49 5.0 0.40 500 1.5 4. 3.1 77.0 4.03 3.9 1.7 6.6 1.39 61.6 3.3 6.3 1.38 1.3 1.1 38.5.0 16.4 0.86 13.5 0.70 15.4 0.81 6.6 0.34 5.3 0.8 300 7.5.5 1.9 8.3.59 35. 1.11 8.7 0.90 65.9.07 8. 0.88.9 0.7 41. 1.9 17.6 0.55 14.3 0.45 16.5 0.5 7.0 0. 5.7 0.18 100.5 0.8 0.6 89.1 0.93 40.0 0.4 33.0 0.34 71.3 0.75 3.0 0.33 6.4 0.8 44.5 0.47 0.0 0.1 16.5 0.17 17.8 0.19 8.0 0.08 6.6 0.07 MA 00 00 kn 150 kn 100 kn 50 kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 3 000 75 5 18.8 5.7 8.06 1.3 6.70 1.8 4.03 10.7 3.35 1 500 37.5 1.5 9.4 48.9 7.68 45.4 7.13 36.7 5.76 30.3 4.75 4.5 3.84 36.1 5.66 15.1.38 1. 1.9 1 000 5 8.3 6.3 65.0 6.80 5.1 5.48 48.7 5.10 39.1 4.09 76.5 8.01 3.5 3.40 6.1.73 38.8 4.01 16. 1.70 13.0 1.36 750 18.8 6.3 4.7 68.6 5.39 5.8 4.30 119 9.37 51.4 4.04 41.1 3. 79.6 6.5 34.3.69 7.4.15 39.8 3.1 17.1 1.35 13.7 1.07 500 1.5 4. 3.1 167 8.77 71.4 3.74 57.7 3.0 15 6.58 53.5.80 43..6 83.8 4.39 35.7 1.87 8.8 1.51 41.9.19 17.8 0.93 14.4 0.75 300 7.5.5 1.9 178 5.6 76.1.39 61.8 1.94 134 4.1 57.1 1.79 46.4 1.46 89.4.81 38.1 1.0 30.9 0.97 44.7 1.40 19.0 0.60 15.5 0.49 100.5 0.8 0.6 195.05 87.3 0.9 71.3 0.76 146 1.54 65.9 0.69 54.3 0.57 97.8 1.0 44.0 0.46 36. 0.38 48.9 0.51.0 0.3 18.1 0.19 MA 350 350 kn 50 kn 150 kn 100 kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 3 000 75 50 5 41. 1.9 61. 19. 46.8 14.7 7.5 8.6 1 500 37.5 5 1.5 80.9 1.7 113 17.8 8.0 1.8 48.5 7.6 75.5 11.8 54.7 8.59 3.3 5.08 1 000 5 16.7 8.3 10 1.6 144 15.1 86.1 9.0 10 1.6 86.5 9.00 51.7 5.41 80.4 8.4 57.7 6.04 34.4 3.61 750 18.8 1.5 6.3 10 16.5 17 9.99 09 16.4 150 11.7 90.8 7.13 15 9.87 90.1 7.07 54.5 4.8 83.8 6.58 60.1 4.7 36.3.85 500 1.5 8.3 4. 308 16.1 3 11.7 134 7.04 0 11.5 159 8.37 96.1 5.03 13 6.9 95.9 5.0 57.7 3.0 88.1 4.61 63.9 3.35 38.4.01 300 7.5 5.5 331 10.4 4 7.61 144 4.53 36 7.44 173 5.43 103 3.4 14 4.46 103 3.6 61.8 1.94 94.7.98 69..17 41. 1.9 100.5 1.7 0.8 369 3.87 69.8 166 1.75 64.76 19.01 119 1.5 158 1.66 115 1.1 71.5 0.75 105 1.11 76.9 0.80 47.6 0.50 3

Screw jacks MA Series Screw jacks MA Series with -starts acme screw TECHNICAL SPECIFICATIONS SCREW JACK SIZE MA 5 MA 10 MA 5 MA 50 Lad capacity [kn], (push - pull) 5 10 5 50 -starts acme screw Tr 18 8 (P4) Tr 10 (P5) Tr 30 1 (P6) Tr 40 14 (P7) Wrm gear centre distance [mm] 30 40 50 63 RV 1 : 4 (4 : 16) 1 : 5 (4 : 0) 1 : 6 (4 : 4) 1 : 7 (4 : 8) Available rati RN 1 : 16 ( : 3) 1 : 0 1 : 18 ( : 36) 1 : 14 ( : 8) RL 1 : 4 1 : 5 1 : 4 1 : 8 RV1 Strke [mm] fr 1 input shaft revlutin Starting efficiency Rati Rati RN1 0.50 0.50 0.67 1 RL1 0.33 0.4 0.50 0.50 RV1 0.3 0.33 0.31 0.9 RN1 0.5 0. 0.3 0.4 RL1 0.0 0.1 0.0 0.18 RV1 0.5 0.53 0.51 0.50 Running efficiency at 3000 rpm ( 1 ) Rati RN1 0.41 0.40 0.43 0.44 RL1 0.36 0.39 0.39 0.38 RV1 4.9 9.7 6 56 Starting trque n input shaft at max. lad [] Rati RN1 1.6 3.6 1 34 RL1 1.4 3 10 3 Max. permissible perating pwer ( ) [] Rati RV1 0.5 0.78 1..4 RN1 0.6 0.40 0.7 1.7 RL1 0.3 0.35 0.6 1. Reactive trque n acme screw (nut) required at max. lad [] 1 30 97 43 Gear bx material casting in aluminium ally EN 1706 - AC-AlSi10Mg T6 casting in spheridal graphite irn EN-GJS-500-7 (UNI EN 1563) Mass f screw jack withut acme screw [kg]. 4.3 13 6 Mass fr every 100 mm f acme screw [kg] 0.16 0.3 0.45 0.8 ( 1 ) - efficiency figures at different input speed n page 36 ( ) - THERMAL limit, referred t fllwing wrking cnditins duty cycle 40 % ver 10 min time perid (30 % ver 1 hur time perid) fr screw jacks with travelling screw (Md.A) duty cycle 30 % ver 10 min time perid (0 % ver 1 hur time perid) fr screw jacks with travelling nut (Md.B) at 5 C envirnment temperature 4

Screw jacks MA Series MA 80 MA 100 MA 00 MA 350 SCREW JACK SIZE 80 100 00 350 Lad capacity [kn], (push - pull) Tr 55 18 (P9) Tr 60 4 (P1) Tr 70 4 (P1) Tr 100 3 (P16) -starts acme screw 63 80 100 15 Wrm gear centre distance [mm] 1 : 7 (4 : 8) 1 : 8 (4 : 3) 1 : 8 (4 : 3) 3 : 3 RV Screw jacks MA Series with -starts acme screw TECHNICAL SPECIFICATIONS 1 : 14 ( : 8) 1 : 4 1 : 4 1 : 16 ( : 3) RN Available rati 1 : 8 1 : 3 1 : 3 1 : 3 RL.57 3 3 3 RV1 1.9 1 1 RN1 0.64 0.75 0.75 1 RL1 0.8 0.30 0.8 0.6 RV1 0.3 0.1 0.0 0.3 RN1 Rati Rati Strke [mm] fr 1 input shaft revlutin Starting efficiency 0.17 0.19 0.18 0.18 RL1 0.51 0.54 0.5 0.51 RV1 0.44 0.43 0.4 0.48 RN1 0.38 0.41 0.39 0.41 RL1 Rati Running efficiency at 3000 rpm ( 1 ) 119 158 34 650 RV1 7 76 163 480 RN1 48 63 134 316 RL1 Rati Starting trque n input shaft at max. lad [] 3. 4 6. 10.5 RV1.4 3.5 5.4 10 RN1 1.7 3.1 5.3 9.6 RL1 Rati Max. permissible perating pwer ( ) [] 50 775 1 690 4 100 casting in spheridal graphite irn EN-GJS-500-7 (UNI EN 1563) Reactive trque n acme screw (nut) required at max. lad [] Gear bx material 6 48 75 145 Mass f screw jack withut acme screw [kg] 1.6 1.8.5 5. Mass fr every 100 mm f acme screw [kg] ( 1 ) - efficiency figures at different input speed n page 36 ( ) - THERMAL limit, referred t fllwing wrking cnditins duty cycle 40 % ver 10 min time perid (30 % ver 1 hur time perid) fr screw jacks with travelling screw (Md.A) duty cycle 30 % ver 10 min time perid (0 % ver 1 hur time perid) fr screw jacks with travelling nut (Md.B) at 5 C envirnment temperature 5

Screw jacks MA Series - -starts acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk at 5 C envirnment temperature and max. duty cycle f: 40 % ver 10 min time perid r 30 % ver 1 hur time perid, fr screw jacks with travelling screw (Md.A), 30 % ver 10 min time perid r 0 % ver 1 hur time perid, fr screw jacks with travelling nut (Md.B) ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. MA 5 5 kn 4 kn 3 kn 1 kn RV RN RL MA 10 10 kn 8 kn 6 kn kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 3 000 100 5 0 6.1 1.90.0 0.6 1.7 0.5 4.9 1.5 1.6 0.49 1.3 0.41 3.7 1.14 1. 0.37 1.0 0.31 1. 0.38 0.4 0.1 0.4 0.10 1 500 50 1.5 10 6.6 1.03. 0.34 1.9 0.9 5.3 0.8 1.8 0.7 1.5 0.3 4.0 0.6 1.3 0.1 1.1 0.17 1.3 0.1 0.5 0.07 0.4 0.05 1 000 33.3 8.3 6.7 6.9 0.7.3 0.4 1.9 0.0 5.5 0.57 1.9 0.19 1.6 0.16 4.1 0.43 1.4 0.14 1. 0.1 1.4 0.14 0.5 0.05 0.4 0.04 750 5 6.3 5 7. 0.56.4 0.19.1 0.16 5.8 0.45 1.9 0.15 1.6 0.13 4.3 0.34 1.5 0.11 1. 0.10 1.5 0.11 0.5 0.04 0.4 0.03 500 16.7 4. 3.3 7.5 0.39.6 0.13. 0.11 6.0 0.31.1 0.11 1.7 0.09 5.5 0.4 1.6 0.08 1.3 0.07 1.5 0.08 0.5 0.03 0.5 0.0 300 10.5 7.8 0.4.8 0.09.3 0.07 6. 0.19. 0.07 1.9 0.06 4.7 0.15 1.7 0.05 1.4 0.04 1.6 0.05 0.6 0.0 0.5 0.01 100 3.3 0.8 0.7 8.6 0.09 3. 0.03.7 0.03 6.9 0.07.5 0.03. 0.0 5. 0.05 1.9 0.0 1.6 0.0 1.7 0.0 0.7 0.01 0.6 0.01 MA 50 50 kn 35 kn 5 kn 10 kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 3 000 100 5 16.7 3.1 0.96 1.0 0.30 0.8 0.3.5 0.77 0.8 0.4 0.6 0.19 1.9 0.58 0.6 0.18 0.5 0.14 0.6 0.19 0. 0.06 0. 0.05 1 500 50 1.5 8.3 3.3 0.5 1.1 0.17 0.8 0.13.7 0.4 0.9 0.13 0.7 0.10.0 0.31 0.7 0.10 0.5 0.08 0.7 0.10 0. 0.03 0. 0.03 1 000 33.3 8.3 5.6 3.5 0.36 1.1 0.1 0.9 0.09.8 0.9 0.9 0.09 0.7 0.07.1 0. 0.7 0.07 0.5 0.05 0.7 0.07 0. 0.0 0. 0.0 750 5 6.3 4. 3.6 0.8 1. 0.09 0.9 0.7.9 0.3 0.9 0.07 0.8 0.06. 0.17 0.7 0.05 0.6 0.04 0.7 0.06 0.3 0.0 0. 0.01 500 16.7 4..8 3.8 0.0 1. 0.06 1.0 0.05 3.1 0.16 1.0 0.05 0.8 0.04.3 0.1 0.7 0.04 0.6 0.03 0.8 0.04 0.3 0.01 0. 0.01 300 10.5 1.7 4.0 0.1 1.3 0.04 1.0 0.03 3. 0.10 1.0 0.03 0.8 0.03.4 0.07 0.8 0.0 0.6 0.0 0.8 0.0 0.3 0.01 0. 0.01 100 3.3 0.8 0.6 4.4 0.05 1.4 0.01 1. 0.01 3.5 0.04 1. 0.01 1.0 0.01.6 0.03 0.9 0.01 0.7 0.01 0.9 0.01 0.3 0.01 0.3 0.01 MA 5 5 kn 0 kn 15 kn 10 kn RV RN RL 3 000 100 50 5 1.6 3.95 7.4.33 16.0 5.00 9.0.8 5.3 1.7 6.4.00 3.6 1.13.1 0.67 1 500 50 5 1.5 34.8 5.46 0.1 3.15 1.1 1.91 4.3 3.8 14.1.1 8.5 1.33 17.4.73 10.0 1.58 6.1 0.95 7.0 1.09 4.0 0.63.5 0.38 1 000 33.3 16.7 8.3 37.1 3.88 1.3.3 13.1 1.37 6.0.7 14.9 1.56 9. 0.96 18.5 1.94 10.6 1.11 6.6 0.69 7.4 0.78 4.3 0.45.6 0.7 750 5 1.5 6.3 38. 3.00.6 1.77 13.5 1.06 6.7.10 15.8 1.4 9.5 0.74 19.1 1.50 11.3 0.89 6.7 0.53 7.7 0.60 4.5 0.35.7 0.1 500 16.7 8.3 4. 40.6.13 3.5 1.3 14.4 0.75 8.4 1.49 16.4 0.86 10.1 0.53 0.3 1.06 11.7 0.61 7. 0.38 8.1 0.43 4.7 0.5.9 0.15 300 10 5.5 43.3 1.36 4.8 0.78 15.8 0.49 30.3 0.95 17.3 0.54 11.0 0.35 1.6 0.68 1.4 0.39 7.9 0.5 8.7 0.7 5.0 0.16 3. 0.10 100 3.3 1.7 0.8 46.7 0.49 8.0 0.9 18. 0.19 3.7 0.34 19.6 0.0 1.7 0.13 3.3 0.4 14.0 0.15 9.1 0.10 9.4 0.10 5.6 0.06 3.7 0.04 RV RN RL RV RN RL RV RN RL RV RN RL 3 000 100 33.3 5 5.0 1.56 4.1 1.9 9.4.94 3.8 1.17 3.1 0.97 6.3 1.96.5 0.78.1 0.65 1 500 50 16.7 1.5 17.0.66 7.0 1.10 5.8 0.91 13.6.13 5.6 0.88 4.7 0.73 10. 1.60 4. 0.66 3.5 0.55 6.8 1.07.8 0.44.3 0.36 1 000 33.3 11.1 8.3 17.7 1.85 7.4 0.78 6.1 0.64 14. 1.48 6.0 0.6 4.9 0.51 10.6 1.11 4.5 0.47 3.7 0.38 7.1 0.74 3.0 0.31.5 0.5 750 5 8.3 6.3 18. 1.43 7.7 0.60 6.3 0.49 14.6 1.14 6.1 0.48 5.1 0.39 10.9 0.86 4.6 0.36 3.8 0.30 7.3 0.57 3.1 0.4.5 0.0 500 16.7 5.6 4. 19.5 1.0 8.1 0.4 6.8 0.35 15.6 0.8 6.5 0.34 5.4 0.8 11.7 0.61 4.9 0.5 4.1 0.1 7.8 0.41 3. 0.17.7 0.14 300 10 3.3.5 0.5 0.64 8.6 0.7 7.3 0.3 16.4 0.5 6.9 0. 5.8 0.18 1.3 0.39 5. 0.16 4.4 0.14 8. 0.6 3.4 0.11.9 0.09 100 3.3 1.1 0.8.6 0.4 9.8 0.10 8.5 0.09 18.6 0.19 7.8 0.08 6.8 0.07 13.5 0.14 5.9 0.06 5.1 0.05 9.1 0.09 3.9 0.04 3.4 0.04 6

Screw jacks MA Series - -starts acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk at 5 C envirnment temperature and max. duty cycle f: 40 % ver 10 min time perid r 30 % ver 1 hur time perid, fr screw jacks with travelling screw (Md.A), 30 % ver 10 min time perid r 0 % ver 1 hur time perid, fr screw jacks with travelling nut (Md.B) ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. MA 80 80 kn 60 kn 40 kn 0 kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 3 000 19 64.3 3.1 18.6 5.84 10.9 3.4 16. 5.07 9.3.9 5.5 1.71 1 500 64.3 3.1 16.1 5.0 3.9 30.6 4.81 18.8.94 35.8 5.6 0.4 3.0 1.5 1.96 17.9.81 10. 1.60 6.3 0.98 1 000 4.9 1.4 10.7 76. 7.98 43.9 4.59 7.4.87 57. 5.98 3.9 3.46 0.6.15 38.1 3.99.0.30 13.7 1.43 19.1 1.99 11.0 1.15 6.9 0.7 750 3.1 16.1 8.0 78.1 6.13 46.7 3.67 8.6.4 58.5 4.60 35.0.75 1.5 1.68 39.0 3.06 3.4 1.83 14.3 1.1 19.5 1.53 11.7 0.9 7. 0.56 500 1.4 10.7 5.4 8.3 4.31 49.1.57 30.0 1.57 61.8 3.3 36.8 1.93.5 1.18 41..15 4.6 1.8 15.0 0.78 0.6 1.08 1.3 0.68 7.5 0.39 300 1.9 6.4 3. 90.5.84 51.9 1.63 33.0 1.03 67.9.13 38.9 1. 4.7 0.78 45.3 1.4 5.9 0.81 16.5 0.5.7 0.71 13.0 0.41 8.3 0.6 100 4.3.1 1.1 98.9 1.03 59.3 0.6 37.9 0.40 74.1 0.78 44.5 0.47 8.4 0.30 49.4 0.5 9.7 0.31 19.0 0.0 4.7 0.6 14.8 0.16 9.5 0.10 MA 100 100 kn 80 kn 50 kn 0 kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 3 000 150 50 37.5 3.3 7.31 18.4 5.76 14.6 4.57 17.8 5.58 7.4.30 5.8 1.83 1 500 75 5 18.8 40.8 6.40 33. 5.0 3.6 5.1 6.5 4.16 48.6 7.63 0.4 3.0 16.6.60 19.4 3.05 8. 1.8 6.7 1.04 1 000 50 16.7 1.5 44.6 4.67 36.1 3.78 8.3 8.6 35.7 3.73 8.9 3.0 51.5 5.39.3.33 18.1 1.89 0.6.16 8.9 0.93 7. 0.76 750 37.5 1.5 9.4 106 8.3 46.6 3.66 36.8.89 84.8 6.66 37.3.93 9.5.31 53.0 4.16 3.3 1.83 18.4 1.44 1. 1.66 9.3 0.73 7.4 0.58 500 5 8.3 6.3 11 5.87 48.3.53 38.9.04 89.7 4.69 38.6.0 31. 1.63 56.0.93 4.1 1.6 19.5 1.0.4 1.17 9.7 0.51 7.8 0.41 300 15 5 3.8 11 3.80 5. 1.64 43.4 1.36 96.9 3.04 41.7 1.31 34.8 1.09 60.5 1.90 6.1 0.8 1.7 0.68 4. 0.76 10.5 0.33 8.7 0.7 100 5 1.7 1.3 131 1.37 59.5 0.6 50.0 0.5 105 1.10 47.6 0.50 40.0 0.4 65.4 0.69 9.8 0.31 5.0 0.6 6. 0.7 11.9 0.1 10.0 0.10 MA 00 00 kn 150 kn 100 kn 50 kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 3 000 150 50 37.5 38. 1.0 30.5 9.56 45.5 14.3 19.1 6.00 15. 4.78 1 500 75 5 18.8 84. 13.3 67.8 10.7 63. 9.9 50.9 7.99 4.1 6.61 33.9 5.3 50.3 7.89 1.1 3.31 17.0.66 1 000 50 16.7 1.5 90.5 9.48 74.3 7.77 67.9 7.11 55.7 5.83 107 11. 45.3 4.74 37.1 3.89 53.5 5.61.6.37 18.6 1.94 750 37.5 1.5 9.4 96.6 7.58 78.1 6.13 166 13.0 7.4 5.69 58.6 4.60 110 8.66 48.3 3.79 39.1 3.07 55.1 4.33 4. 1.90 19.5 1.53 500 5 8.3 6.3 35 1.3 103 5.38 81.8 4.8 177 9.3 77.1 4.04 61.4 3.1 118 6.15 51.4.69 40.9.14 58.8 3.08 5.7 1.35 0.5 1.07 300 15 5 3.8 54 7.98 110 3.45 90.1.83 191 5.99 8.5.59 67.6.1 17 3.99 55.0 1.73 45.0 1.41 63.5.00 7.5 0.86.5 0.71 100 5 1.7 1.3 79.9 17 1.33 103 1.08 10.19 95.1 1.00 77.3 0.81 140 1.46 63.4 0.66 51.6 0.54 69.7 0.73 31.7 0.33 5.8 0.7 MA 350 350 kn 50 kn 150 kn 100 kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 3 000 150 100 50 59.0 18.5 67.0 1.4 39.3 1.4 1 500 75 50 5 154 4. 110 17.3 155 4.3 111 17.5 66.1 10.4 103 16. 74.0 11.6 44.1 6.9 1 000 50 33.3 16.7 168 17.6 198 0.7 10 1.5 163 17.1 119 1.4 71.8 7.51 109 11.4 79.0 8.7 47.9 5.01 750 37.5 5 1.5 89.7 180 14.1 86.4 07 16. 18 10.1 171 13.5 14 9.73 76.8 6.03 114 8.96 8.6 6.49 51. 4.0 500 5 16.7 8.3 43. 315 16.5 191 9.98 30 15.8 5 11.8 136 7.13 181 9.49 135 7.06 81.7 4.8 11 6.3 89.9 4.70 54.5.85 300 15 10 5 461 14.5 337 10.6 00 6.6 330 10.4 41 7.57 143 4.47 198 6.1 145 4.54 85.5.68 13 4.14 96.4 3.03 57.0 1.79 100 5 3.3 1.7 496 5.19 381 4.0 4.53 354 3.70 7.85 173 1.81 1. 163 1.71 104 1.08 14 1.48 109 1.14 69.0 0.7 7

Screw jacks MA Series Screw jacks MA Series with 3-starts acme screw TECHNICAL SPECIFICATIONS SCREW JACK SIZE MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 Lad capacity [kn], (push - pull) 5 50 80 100 00 350 3-starts acme screw Tr 30 18 (P6) Tr 40 1 (P7) Tr 55 7 (P9) Tr 60 36 (P1) Tr 70 36 (P1) Tr 100 48 (P16) Wrm gear centre distance [mm] 50 63 63 80 100 15 RV 1 : 6 (4 : 4) 1 : 7 (4 : 8) 1 : 7 (4 : 8) 1 : 8 (4 : 3) 1 : 8 (4 : 3) 3 : 3 Available rati RN 1 : 18 ( : 36) 1 : 14 ( : 8) 1 : 14 ( : 8) 1 : 4 1 : 4 1 : 16 ( : 3) RL 1 : 4 1 : 8 1 : 8 1 : 3 1 : 3 1 : 3 RV3 3 3 3.86 4.5 4.5 4.5 Strke [mm] fr 1 input shaft revlutin Starting efficiency Rati Rati RN3 1 1.5 1.93 1.5 1.5 3 RL3 0.75 0.75 0.96 1.1 1.1 1.5 RV3 0.36 0.34 0.33 0.36 0.34 0.31 RN3 0.8 0.9 0.8 0.7 0.4 0.8 RL3 0.4 0.4 0.1 0.5 0.1 0.1 RV3 0.57 0.56 0.57 0.59 0.58 0.57 Running efficiency at 3000 rpm ( 1 ) Rati RN3 0.48 0.50 0.50 0.5 0.48 0.54 RL3 0.44 0.47 0.43 0.49 0.45 0.46 RV3 33 70 148 01 47 803 Starting trque n input shaft at max. lad [] Rati RN3 15 4 89 88 03 594 RL3 13 6 60 73 167 391 Max. permissible perating pwer ( ) [] Rati RV3 1.8 3.6 3.6 4.3 6.9 11.7 RN3 1.1.6.6 4 6. 11 RL3 0.95 3.7 6.1 10.5 Reactive trque n acme screw (nut) required at max. lad [] 13 303 64 980 100 5 041 Gear bx material casting in spheridal graphite irn EN-GJS-500-7 (UNI EN 1563) Mass f screw jack withut acme screw [kg] 13 6 6 48 75 145 Mass fr every 100 mm f acme screw [kg] 0.45 0.8 1.6 1.8.5 5. ( 1 ) - efficiency figures at different input speed n page 36 ( ) - THERMAL limit, referred t wrk with max. duty cycle 40 % ver 10 min time perid (30 % ver 1 hur time perid) at 5 C envirnment temperature 8

Screw jacks MA Series - travelling screw (Md.A) - 3-starts acme screw - Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 40 % ver 10 min time perid r 30 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. MA 5 5 kn 0 kn 15 kn 10 kn RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 3 000 150 50 37.5 8..58 6.8.1 6.6.07 5.4 1.70 1.7 3.97 5.0 1.55 4.1 1.7 8.5.65 3.3 1.03.7 0.85 1 500 75 5 18.8.6 3.55 9. 1.44 7.6 1.18 18.1.84 7.4 1.15 6.1 0.95 13.6.13 5.5 0.86 4.5 0.71 9.1 1.4 3.7 0.58 3.0 0.47 1 000 50 16.7 1.5 3.5.45 9.7 1.01 7.9 0.8 18.8 1.96 7.7 0.81 6.3 0.66 14.1 1.47 5.8 0.60 4.8 0.49 9.4 0.98 3.9 0.40 3. 0.33 750 37.5 1.5 9.4 4.1 1.89 9.9 0.78 8. 0.64 19. 1.51 8.0 0.6 6.5 0.51 14.4 1.13 6.0 0.47 4.9 0.38 9.6 0.75 4.0 0.31 3.3 0.6 500 5 8.3 6.3 5.5 1.33 10.5 0.55 8.7 0.46 0.4 1.07 8.4 0.44 7.0 0.36 15.3 0.80 6.3 0.33 5.3 0.7 10. 0.53 4. 0. 3.5 0.18 300 15 5 3.8 6.7 0.84 11.0 0.35 9.3 0.9 1.3 0.67 8.8 0.8 7.5 0.3 16.0 0.50 6.6 0.1 5.6 0.18 10.7 0.33 4.4 0.14 3.8 0.1 100 5 1.7 1.3 9.1 0.30 1.5 0.13 10.8 0.11 3.3 0.4 10.0 0.10 8.5 0.09 17.4 0.18 7.5 0.08 6.5 0.07 11.6 0.1 5.0 0.05 4.3 0.04 MA 50 50 kn 35 kn 5 kn 10 kn RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 3 000 150 75 37.5 1.8 4.01 16.6 5. 9.0.81 1.4 6.70 11.9 3.73 6.4.00 8.6.68 4.8 1.49.6 0.80 1 500 75 37.5 18.8 45.9 7.1 6.1 4.10 14.3.4 3.1 5.05 18.3.87 10.0 1.57 3.0 3.60 13.1.05 7. 1.1 9. 1.44 5. 0.8.9 0.45 1 000 50 5 1.5 48.5 5.08 7.6.88 15.3 1.60 34.0 3.55 19.3.0 10.7 1.1 4.3.54 13.8 1.44 7.5 0.80 9.7 1.0 5.5 0.58 3.1 0.3 750 37.5 18.8 9.4 49.7 3.90 9.0. 15.8 1.4 34.8.73 0.3 1.59 11.1 0.87 4.9 1.95 14.5 1.14 7.9 0.6 10.0 0.78 5.8 0.45 3. 0.5 500 5 1.5 6.3 5.4.74 30.0 1.57 16.7 0.87 36.7 1.9 1.0 1.10 11.7 0.61 6. 1.37 15.0 0.78 8.4 0.44 10.5 0.55 6.0 0.31 3.4 0.17 300 15 7.5 3.8 55.4 1.74 31.6 0.99 18. 0.57 38.8 1..1 0.69 1.7 0.40 7.7 0.87 15.8 0.50 9.1 0.8 11.1 0.35 6.3 0.0 3.6 0.11 100 5.5 1.3 59.4 0.6 38.8 0.37 0.7 0. 41.6 0.44 4.7 0.6 14.5 0.15 9.7 0.31 17.7 0.18 10.4 0.11 11.9 0.1 7.1 0.07 4. 0.04 MA 80 80 kn 60 kn 40 kn 0 kn RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 3 000 193 96.4 48. 14. 4.45 1.7 6.8 1.3 3.85 7.1. 1 500 96.4 48. 4.1 39.9 6.6 4.0 3.67 47.3 7.4 6.6 4.17 16.0.51 3.7 3.71 13.3.09 8.0 1.6 1 000 64.3 3.1 16.1 56.7 5.93 34.9 3.65 74.4 7.69 4.5 4.45 6.1.74 49.6 5.19 8.3.97 17.6 1.8 4.8.60 14. 1.48 8.7 0.91 750 48. 4.1 1.1 10 7.98 59.8 4.69 36.3.85 76. 5.99 44.8 3.5 7..14 50.8 3.99 9.9.35 18. 1.4 5.4.00 15.0 1.17 9.1 0.71 500 3.1 16.1 8.0 107 5.50 6.4 3.7 38.0 1.99 79.8 4.18 46.8.45 8.5 1.49 53..78 31. 1.63 19.0 0.99 6.6 1.39 15.6 0.8 9.5 0.50 300 19.3 9.6 4.8 115 3.6 65.8.07 41.4 1.30 86.4.71 49.4 1.55 31.1 0.98 57.6 1.81 3.9 1.03 0.7 0.65 8.8 0.90 16.5 0.5 10.4 0.33 100 6.4 3. 1.6 15 1.31 74.4 0.78 47.4 0.50 93.8 0.98 55.8 0.58 35.6 0.37 6.5 0.65 37. 0.39 3.7 0.5 31.3 0.33 18.6 0.19 11.9 0.1 9

Screw jacks MA Series - travelling screw (Md.A) - 3-starts acme screw - Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 40 % ver 10 min time perid r 30 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. MA 100 100 kn 80 kn 50 kn 0 kn RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 3 000 5 75 56.3 9.0 9.10 3.0 7.0 18.1 5.69 4.3 7.63 9..88 7.3.8 1 500 113 37.5 8.1 49.9 7.84 40.3 6.33 39.9 6.7 3.3 5.06 65. 10.3 5.0 3.9 0. 3.16 6.1 4.10 10.0 1.57 8.06 1.7 1 000 75 5 18.8 53.9 5.64 43.4 4.55 43.1 4.51 34.8 3.64 68.6 7.18 6.9.8 1.7.7 7.4.87 10.8 1.13 8.68 0.91 750 56.3 18.8 14.1 56.1 4.40 44. 3.47 113 8.84 44.9 3.5 35.3.77 70.4 5.5 8.0.0.1 1.73 8..1 11. 0.88 8.83 0.69 500 37.5 1.5 9.4 148 7.6 57.9 3.03 46.6.44 118 6.17 46.3.43 37.3 1.95 73.7 3.86 9.0 1.5 3.3 1. 9.5 1.54 11.6 0.61 9.3 0.49 300.5 7.5 5.6 158 4.95 6. 1.95 51.4 1.61 16 3.96 49.7 1.56 41.1 1.9 78.8.47 31.1 0.98 5.7 0.81 31.5 0.99 1.5 0.39 10.3 0.3 100 7.5.5 1.9 169 1.77 70.1 0.73 58.7 0.61 136 1.4 56.1 0.59 47.0 0.49 84.6 0.39 35.1 0.37 9.4 0.31 33.9 0.35 14.0 0.15 11.8 0.1 MA 00 00 kn 150 kn 100 kn 50 kn RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 3 000 5 75 56.3 39.9 1.5 5.1 7.89 19.9 6.6 1 500 113 37.5 8.1 87.4 13.8 8.0 1.9 65.6 10.3 54.7 8.58 43.7 6.87 66.7 10.5 7.3 4.9 1.9 3.43 1 000 75 5 18.8 117 1. 94.9 9.94 87.6 9.17 71. 7.45 141 14.8 58.4 6.11 47.5 4.97 70.4 7.37 9. 3.06 3.7.48 750 56.3 18.8 14.1 14 9.69 99.6 7.8 17 17.0 9.6 7.7 74.7 5.86 144 11.4 61.7 4.85 49.8 3.91 7.1 5.66 30.9.4 4.9 1.95 500 37.5 1.5 9.4 131 6.87 104 5.46 9 1.0 98.4 5.15 78. 4.09 153 7.98 65.6 3.43 5.1.73 76. 3.99 3.8 1.7 6.1 1.36 300.5 7.5 5.6 35 10. 140 4.39 114 3.58 44 7.66 105 3.9 85.4.68 163 5.11 69.9.0 57.0 1.79 81.3.55 35.0 1.10 8.5 0.89 100 7.5.5 1.9 355 3.71 160 1.67 130 1.36 66.75 10 1.5 97.3 1.0 177 11.9 80.0 0.83 64.9 0.68 88.6 0.93 39.9 0.4 3.4 0.34 30 MA 350 350 kn 50 kn 150 kn 100 kn RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 3 000 5 150 75 77. 4.3 51.5 16. 1 500 113 75 37.5 14.3 146.9 85. 13.4 137 1.4 97.0 15.3 56.8 8.91 1 000 75 50 5 14.4 57 6.9 153 16.0 14.4 154 16.1 91.6 9.59 143 15.0 103 10.8 61.1 6.39 750 56.3 37.5 18.8 7 17.9 371 9. 67 1.0 163 1.8 3 17.5 160 1.6 97.4 7.65 149 11.7 107 8.38 64.9 5.10 500 37.5 5 1.5 547 8.6 401 1.0 4 1.7 390 0.5 87 15.0 173 9.03 34 1.3 17 9.00 104 5.4 156 8.17 115 6.00 69.0 3.61 300.5 15 7.5 588 18.5 48 13.5 5 7.91 40 13. 306 9.59 180 5.65 5 7.91 183 5.76 108 3.39 167 5.7 11 3.84 7.0.6 100 7.5 5.5 66 6.55 477 4.99 30 3.16 447 4.68 341 3.57 16.6 68.81 05.14 19 1.35 179 1.87 137 1.43 86. 0.90

Screw jacks MA Series Screw jacks MA Series with 4-starts acme screw TECHNICAL SPECIFICATIONS SCREW JACK SIZE MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 Lad capacity [kn], (push - pull) 5 50 80 100 00 350 3-starts acme screw Tr 30 4 (P6) Tr 40 8 (P7) Tr 55 36 (P9) Tr 60 48 (P1) Tr 70 48 (P1) Tr 100 64 (P16) Wrm gear centre distance [mm] 50 63 63 80 100 15 RV 1 : 6 (4 : 4) 1 : 7 (4 : 8) 1 : 7 (4 : 8) 1 : 8 (4 : 3) 1 : 8 (4 : 3) 3 : 3 Available rati RN 1 : 18 ( : 36) 1 : 14 ( : 8) 1 : 14 ( : 8) 1 : 4 1 : 4 1 : 16 ( : 3) RL 1 : 4 1 : 8 1 : 8 1 : 3 1 : 3 1 : 3 RV4 4 4 5.14 6 6 6 Strke [mm] fr 1 input shaft revlutin Starting efficiency Rati Rati RN4 1.33.57 4 RL4 1 1 1.9 1.5 1.5 RV4 0.40 0.40 0.37 0.39 0.37 0.35 RN4 0.30 0.3 0.31 0.7 0.6 0.31 RL4 0.6 0.4 0.3 0.5 0.4 0.4 RV4 0.60 0.61 0.60 0.6 0.61 0.60 Running efficiency at 3000 rpm ( 1 ) Rati RN4 0.5 0.54 0.54 0.5 0.51 0.57 RL4 0.47 0.47 0.47 0.49 0.48 0.50 RV4 41 81 177 45 513 960 Starting trque n input shaft at max. lad [] Rati RN4 18 51 107 117 44 709 RL4 16 34 71 97 01 467 Max. permissible perating pwer ( ) [] Rati RV4 1.9 3.9 3.9 4.5 7. 1.3 RN4 1..8.8 4. 6.5 11.5 RL4 1.1.1 3.7 6.3 11 Reactive trque n acme screw (nut) required at max. lad [] 149 363 765 1 190 510 6 000 Gear bx material fusine in ghisa sferidale EN-GJS-500-7 (UNI EN 1563) Mass f screw jack withut acme screw [kg] 13 6 6 48 75 145 Mass fr every 100 mm f acme screw [kg] 0.45 0.8 1.6 1.8.5 5. ( 1 ) - efficiency figures at different input speed n page 36 ( ) - THERMAL limit, referred t wrk with max. duty cycle 40 % ver 10 min time perid (30 % ver 1 hur time perid) at 5 C envirnment temperature 31

Screw jacks MA Series - travelling screw (Md.A) - 4-starts acme screw - Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 40 % ver 10 min time perid r 30 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. MA 5 5 kn 0 kn 15 kn 10 kn RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 3 000 00 66.7 50 8..58 6.7.11 6.16 1.94 5.1 1.58 10.7 3.34 4.1 1.9 3.4 1.05 1 500 100 33.3 5 8.3 4.44 11.4 1.78 9.3 1.46.7 3.56 9.1 1.4 7.5 1.17 17.0.67 6.80 1.07 5.6 0.88 11.3 1.78 4.6 0.71 3.7 0.58 1 000 66.7. 16.7 9.3 3.06 11.9 1.4 9.7 1.0 3.4.45 9.5 1.00 7.8 0.81 17.6 1.84 7.13 0.75 5.8 0.61 11.7 1.3 4.8 0.50 3.9 0.41 750 50 16.7 1.5 30.0.35 1.3 0.96 10.1 0.79 4.0 1.88 9.8 0.77 8.1 0.63 18.0 1.41 7.34 0.58 6.0 0.47 1.0 0.94 4.9 0.38 4.0 0.3 500 33.3 11.1 8.3 31.6 1.65 1.9 0.67 10.7 0.56 5.3 1.3 10.3 0.54 8.6 0.45 19.0 0.99 7.70 0.40 6.5 0.34 1.6 0.66 5. 0.7 4.3 0. 300 0 6.7 5 3.8 1.03 13.5 0.4 11.4 0.36 6.3 0.8 10.8 0.34 9. 0.9 19.7 0.6 8.10 0.5 6.9 0. 13.1 0.41 5.4 0.17 4.6 0.14 100 6.7. 1.7 35.6 0.37 15. 0.16 13.1 0.14 8.5 0.30 1. 0.13 10.5 0.11 1.4 0. 9.1 0.10 7.9 0.08 14.3 0.15 6.1 0.06 5.3 0.05 MA 50 50 kn 35 kn 5 kn 10 kn RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 3 000 00 100 50 0.7 6.49 11.9 3.74 6.1 8.1 14.8 4.63 8.5.67 10.5 3.8 5.9 1.85 3.4 1.07 1 500 100 50 5 55.6 8.73 3. 5.05 19.1.99 38.9 6.11.5 3.53 13.4.09 7.8 4.36 16.1.5 9.5 1.50 11.1 1.75 6.5 1.01 3.8 0.60 1 000 66.7 33.3 16.7 58. 6.09 33.8 3.54 0.4.14 40.7 4.6 3.7.48 14.3 1.50 9.1 3.05 16.9 1.77 10. 1.07 11.7 1. 6.8 0.71 4.1 0.43 750 50 5 1.5 59.4 4.66 35.4.78 1.1 1.65 41.6 3.6 4.8 1.95 14.8 1.16 9.7.33 17.7 1.39 10.5 0.83 11.9 0.93 7.1 0.56 4. 0.33 500 33.3 16.7 8.3 6.0 3.5 36.6 1.91.3 1.16 43.4.7 5.6 1.34 15.6 0.81 31.0 1.6 18.3 0.96 11.1 0.58 1.4 0.65 7.3 0.38 4.5 0.3 300 0 10 5 65..05 38.5 1.1 4. 0.76 45.6 1.43 7.0 0.85 16.9 0.53 3.6 1.0 19.3 0.60 1.1 0.38 13.1 0.41 7.7 0.4 4.9 0.15 100 6.7 3.3 1.7 69.5 0.73 4.8 0.45 7.6 0.9 48.7 0.51 9.9 0.31 19.9 0.0 34.8 0.36 1.4 0. 13.8 0.14 13.9 0.15 8.6 0.09 5.5 0.06 3 MA 80 80 kn 60 kn 40 kn 0 kn RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 3 000 57 19 64.3 7.3 8.57 15.3 4.79 8.8.74 1 500 19 64.3 3.1 9.3 4.60 58.8 9.3 3.7 5.14 19.6 3.07 9.4 4.6 16.4.57 9.8 1.53 1 000 85.7 4.9 1.4 4.4 4.44 9.0 9.63 5.1 5.45 31.8 3.33 61.3 6.4 34.7 3.64 1.. 30.7 3.1 17.4 1.8 10.6 1.11 750 64.3 3.1 16.1 16 9.84 73.0 5.73 44.0 3.46 94.0 7.38 54.7 4.30 33.0.59 6.7 4.9 36.5.86.0 1.73 31.3.46 18.3 1.43 11.0 0.86 500 4.9 1.4 10.7 131 6.84 76.0 3.98 46.1.41 98.0 5.13 57.0.98 34.6 1.81 65.3 3.4 38.0 1.99 3.0 1.1 3.7 1.71 19.0 0.99 11.5 0.60 300 5.7 1.9 6.4 141 4.41 79.9.51 50.1 1.57 106 3.31 59.9 1.88 37.6 1.18 70..0 39.9 1.5 5.0 0.79 35.1 1.10 0.0 0.63 1.5 0.39 100 4.3 4.3.1 15 1.58 89.6 0.94 57.0 0.60 114 1.19 67. 0.70 4.8 0.45 75.6 0.79 44.8 0.47 8.5 0.30 37.8 0.40.4 0.3 14.3 0.15

Screw jacks MA Series - travelling screw (Md.A) - 4-starts acme screw - Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 40 % ver 10 min time perid r 30 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. MA 100 100 kn 80 kn 50 kn 0 kn RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 3 000 300 100 75 30.6 9.60 4. 7.58 30.9 9.69 1.3 3.84 9.7 3.03 1 500 150 50 37.5 66.6 10.5 53.7 8.44 53. 8.36 43.0 6.75 33.3 5.3 6.9 4. 3.9 5.16 13.3.09 10.8 1.69 1 000 100 33.3 5 71.8 7.5 57.9 6.06 57.4 6.01 46.3 4.85 85.8 8.99 35.9 3.76 9.0 3.03 34.4 3.59 14.4 1.50 11.6 1.1 750 75 5 18.8 74.7 5.87 58.9 4.6 141 11.1 59.8 4.69 47.1 3.70 87.9 6.90 37.4.93 9.5.31 35..76 15.0 1.17 11.8 0.9 500 50 16.7 1.5 183 9.58 77. 4.04 6. 3.5 147 7.67 61.8 3.3 49.8.60 91.5 4.79 38.6.0 31.1 1.63 36.6 1.9 15.5 0.81 1.5 0.65 300 30 10 7.5 195 6.11 8.9.60 68.5.15 156 4.89 66.3.08 54.8 1.7 97.3 3.05 41.7 1.30 34.3 1.08 38.9 1. 16.6 0.5 13.7 0.43 100 10 3.3.5 08.18 93.5 0.98 78. 0.8 167 1.74 74.8 0.78 6.6 0.66 104 1.09 46.8 0.49 39.1 0.41 41.6 0.44 18.7 0.0 15.7 0.16 MA 00 00 kn 150 kn 100 kn 50 kn RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 3 000 300 100 75 49.3 15.5 31.3 9.81 4.7 7.75 1 500 150 50 37.5 101 15.9 80.5 1.7 67.4 10.6 53.7 8.43 83.3 13.1 33.7 5.9 6.8 4.1 1 000 100 33.3 5 144 15.0 116 1. 108 11.3 86.9 9.10 71.6 7.50 57.9 6.07 87.4 9.15 35.8 3.75 9.0 3.03 750 75 5 18.8 151 11.9 1 9.54 113 8.87 91.1 7.15 179 14.1 75.3 5.9 60.7 4.77 89.4 7.0 37.7.96 30.4.38 500 50 16.7 1.5 160 8.37 17 6.64 8 14.8 10 6.8 95. 4.98 188 9.8 80.0 4.19 63.4 3.3 93.8 4.91 40.0.09 31.7 1.66 300 30 10 7.5 398 1.5 170 5.33 138 4.34 99 9.38 18 4.00 104 3.5 199 6.5 84.9.67 69.1.17 99.5 3.13 4.4 1.33 34.5 1.08 100 10 3.3.5 431 4.51 193.0 157 1.64 33 3.38 145 1.51 118 1.3 15.5 96.4 1.01 78.3 0.8 108 1.13 48. 0.50 39. 0.41 MA 350 350 kn 50 kn 150 kn 100 kn RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 3 000 300 00 100 63.6 0.0 1 500 150 100 50 174 7.4 180 8.3 105 16.4 170 6.7 10 18.9 69.6 11.0 1 000 100 66.7 33.3 61 7.3 187 19.5 65 7.8 190 19.9 11 11.7 177 18.5 17 13.3 74.6 7.80 750 75 50 5 76 1.7 38 5.7 197 15.5 75 1.6 197 15.5 118 9.9 184 14.4 131 10.3 78.9 6.19 500 50 33.3 16.7 489 5.6 93 15.3 479 5.1 349 18.3 09 11.0 87 15.1 10 11.0 16 6.56 19 10.1 140 7.31 83.6 4.38 300 30 0 10 716.5 519 16.3 306 9.59 511 16.1 371 11.7 18 6.85 307 9.63 1 6.98 131 4.41 05 6.4 148 4.66 87.3.74 100 10 6.7 3.3 759 7.94 576 6.03 36 3.79 54 5.67 411 4.31 59.71 35 3.40 47.58 155 1.6 17. 165 1.7 104 1.08 33

Screw jacks MA Series - verall dimensins Mdel A - TRAVELLING SCREW Mdel B - TRAVELLING NUT 34

Screw jacks MA Series - verall dimensins SIZE ACME SCREW MA 5 MA 10 MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 Tr 18 4 Tr 5 Tr 30 6 Tr 40 7 Tr 55 9 Tr 60 1 Tr 70 1 Tr 100 16 A 80 100 16 160 160 00 30 80 B 14 140 175 35 35 76 330 415 C 80 105 130 160 160 00 30 300 D1 (min.) 39 44 58 58 68 68 78 98 D (min.) 54 60 8 84 94 98 113 138 D3 (min.) 40 45 60 60 70 70 80 100 D4 (min.) 65 75 95 105 10 150 170 0 E 6 80 100 10 10 150 175 30 F 95 110 140 190 190 0 70 330 F1 1.5 14 17.5 3 3 6 30 4 G 100 114 136 165 165 05 56 36 H 65 80 100 10 10 160 190 40 I 30 40 50 63 63 80 100 15 L 149 179 1.5 69 69 330 378 490 O 9 9 13 17 17 1 8 34 0 1 15 19 19 6 30 Q 15 16 4 6 6 30 35 40 S 46.5 46 57.5 80 80 91 113 11 U 31 38 50 70 70 75 87 16 V 4 46 64 63 63 74 110 118 W 119 144 184 18 8 68 308 378 Z M5, depth 10 M5, depth 1 M5, depth 10 M6, depth 14 M6, depth 14 M6, depth 14 M10, depth 0 M10, depth 5 Z1 80 85 90 115 140 140 170 00 a 68 75 100 10 150 150 180 50 a1 0 5 30 40 50 60 75 100 b 45 55 75 85 110 110 130 180 c 5 30 40 50 70 70 85 115 c1 3 38 48 68 78 90 108 138 d 10 14 19 4 4 8 3 38 e 1 15 0 30 40 40 50 70 f 30 40 50 60 75 80 100 150 g 19 4 38 38 48 48 58 78 h 0 5 40 40 50 50 60 80 h1 60 75 100 10 140 180 10 80 h 30 40 50 70 80 100 10 160 i M1 1.75 M16 1.5 M0 1.5 M30 M4 3 M4 3 M56 3 M80 3 k 14 0 5 35 40 50 60 80 l 30 40 50 50 60 60 80 m 68 75 100 10 130 150 180 50 n 10 10 10 1 10 10 M5, depth. 10 M6, depth 14 M8, depth 16 M8, depth 16 M8, depth 16 M8, depth 16 M10, depth 4 M1, depth 3 p 19 4 40 40 45 50 60 65 q 3 3 15 5 5 0 6 6 30 8 7 40 8 7 40 8 7 40 10 8 40 10 8 60 r 50 56 75 90 105 10 140 00 s 8 10 1 15 0 0 5 35 t M45 1.5 M55 1.5 M70 M90 M90 M110 M150 3 M180 3 t1 40 45 50 75 100 100 130 160 t 8 33 35 50 80 70 95 115 u, n hles 7, 4 hles 9, 4 hles 11, 4 hles 17, 4 hles 1, 4 hles 1, 4 hles 6, 6 hles 30, 6 hles u1, n hles 7, 4 hles 9, 4 hles 11, 4 hles 17, 4 hles 17, 4 hles 1, 4 hles 6, 6 hles 30, 6 hles v 15 0 5 35 40 50 60 80 w 15 17 5 36 38 41 4 45 z 50 60 77 95 95 10 160 00 J1 63 B5/B14: 6 63 B5/B14: 69 63/71 B5: 10 80 B5: 100 80 B5: 100 80/90 B5: 10 90 B5: 14 100/11 B5: 14 J1s J Js 63 B5: 30 63 B14: 5 71 B5: 1 71 B14: 131 71 B5: 40 71 B14: 1.5 63 B5: 0 63 B14: 71 B5: 19 71 B14: 138 71 B5: 30 71 B14: 3 63 B5: 7 71 B5: 17 80 B5: 18 80 B14: 176 90 B5: 18 90 B14: 18 80 B5: 37 80 B14: 90 B5: 37 90 B14: 7 80 B5: 0 80 B5: 0 80/90 B5: 90 B5: 00 90 B14: 00 100 B5: 0 100 B14: 0 90 B5: 0 90 B14: 100 B5: 45 100 B14: 90 B5: 00 90 B14: 00 100/11 B5 40 100/11 B5: 0 100/11 B14: 40 100/11 B14: 0 90 B5: 0 90 B14: 100/11 B5 5 100/11 B5: 45 100/11 B14: 100/11 B14: 90 B5: 100/11 B5: 10 13 B5: 97 13 B5: 35 13 B5: 353 160 B5: 365 13 B5: 10 160 B5: 70 35

Screw jacks MA Series Ttal efficiency f screw jack with 1-start acme screw h MA 5 MA 10 MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 3 000 0.40 0.31 0.7 0.41 0.30 0.8 0.38 0.30 0.8 0.37 0.3 0.6 0.39 0.33 0.7 0.41 0.3 0.30 0.38 0.31 0.8 0.39 0.34 0.9 1 500 0.36 0.8 0.5 0.37 0.8 0.7 0.34 0.7 0.5 0.3 0.8 0.3 0.34 0.8 0.3 0.36 0.9 0.6 0.33 0.6 0.4 0.3 0.9 0.4 1 000 0.34 0.7 0.4 0.35 0.6 0.5 0.3 0.6 0.4 0.30 0.6 0. 0.31 0.6 0.1 0.34 0.6 0.5 0.31 0.4 0.3 0.9 0.7 0.3 750 0.33 0.6 0.3 0.34 0.5 0.5 0.31 0.5 0.3 0.9 0.5 0.1 0.30 0.5 0.0 0.3 0.5 0.4 0.30 0.3 0. 0.8 0.6 0. 500 0.31 0.5 0.1 0.3 0.4 0.3 0.9 0.4 0. 0.8 0.4 0.0 0.7 0.3 0.19 0.31 0.4 0. 0.8 0. 0.1 0.7 0.5 0.1 300 0.30 0.4 0.0 0.31 0.3 0. 0.8 0.3 0.0 0.6 0.3 0.18 0.5 0. 0.17 0.9 0.3 0.1 0.7 0.1 0.19 0.5 0.3 0.19 100 0.8 0. 0.17 0.9 0.0 0.19 0.6 0.0 0.18 0.4 0.1 0.16 0.4 0.0 0.15 0.7 0.0 0.18 0.4 0.18 0.16 0. 0.1 0.17 AT START 0.1 0.16 0.13 0. 0.15 0.14 0.0 0.16 0.13 0.18 0.15 0.11 0.18 0.15 0.11 0.0 0.13 0.1 0.17 0.1 0.11 0.16 0.14 0.10 Ttal efficiency f screw jack with -starts acme screw h MA 5 MA 10 MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 3 000 0.5 0.41 0.36 0.53 0.40 0.39 0.51 0.43 0.39 0.50 0.44 0.38 0.51 0.44 0.38 0.54 0.43 0.41 0.5 0.4 0.39 0.51 0.48 0.41 1 500 0.48 0.38 0.33 0.49 0.36 0.35 0.47 0.38 0.34 0.46 0.40 0.33 0.46 0.40 0.33 0.49 0.39 0.36 0.48 0.38 0.35 0.46 0.43 0.36 1 000 0.46 0.36 0.31 0.46 0.35 0.33 0.45 0.36 0.33 0.43 0.37 0.30 0.43 0.37 0.30 0.46 0.36 0.33 0.45 0.35 0.3 0.44 0.40 0.33 750 0.44 0.35 0.9 0.44 0.33 0.31 0.44 0.35 0.3 0.4 0.35 0.9 0.4 0.35 0.9 0.45 0.34 0.3 0.43 0.33 0.31 0.4 0.39 0.31 500 0.4 0.33 0.8 0.4 0.31 0.30 0.41 0.33 0.30 0.39 0.34 0.8 0.40 0.33 0.7 0.43 0.33 0.31 0.41 0.31 0.9 0.40 0.35 0.9 300 0.40 0.31 0.6 0.41 0.9 0.8 0.39 0.31 0.7 0.37 0.3 0.5 0.36 0.3 0.5 0.39 0.31 0.7 0.38 0.9 0.7 0.36 0.33 0.8 100 0.37 0.8 0. 0.37 0.5 0.4 0.35 0.7 0.4 0.34 0.8 0. 0.33 0.8 0. 0.36 0.7 0.4 0.34 0.5 0.3 0.34 0.9 0.3 AT START 0.3 0.5 0.0 0.33 0. 0.1 0.31 0.3 0.0 0.9 0.4 0.18 0.8 0.3 0.17 0.30 0.1 0.19 0.8 0.0 0.18 0.6 0.3 0.18 Ttal efficiency f screw jack with 3-starts acme screw h MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 RATIO RATIO RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 RV3 RN3 RL3 3 000 0.57 0.48 0.44 0.56 0.50 0.47 0.57 0.50 0.43 0.59 0.5 0.49 0.58 0.48 0.45 0.57 0.54 0.46 1 500 0.53 0.43 0.40 0.5 0.46 0.4 0.5 0.46 0.38 0.55 0.48 0.44 0.54 0.44 0.41 0.53 0.49 0.4 1 000 0.51 0.41 0.38 0.49 0.43 0.39 0.50 0.43 0.35 0.5 0.44 0.41 0.51 0.41 0.38 0.50 0.47 0.39 750 0.50 0.40 0.37 0.48 0.41 0.38 0.48 0.41 0.34 0.51 0.43 0.41 0.50 0.39 0.36 0.48 0.45 0.37 500 0.47 0.38 0.34 0.46 0.40 0.36 0.46 0.39 0.3 0.49 0.41 0.38 0.47 0.36 0.34 0.46 0.4 0.35 300 0.45 0.36 0.3 0.43 0.38 0.33 0.43 0.37 0.30 0.45 0.38 0.35 0.44 0.34 0.31 0.43 0.39 0.33 100 0.41 0.3 0.8 0.40 0.34 0.9 0.39 0.33 0.6 0.4 0.34 0.31 0.40 0.30 0.8 0.40 0.35 0.8 AT START 0.36 0.8 0.4 0.34 0.9 0.4 0.33 0.8 0.1 0.36 0.7 0.5 0.34 0.4 0.1 0.31 0.8 0.1 Ttal efficiency f screw jack with 4-starts acme screw h MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 RATIO RATIO RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 RV4 RN4 RL4 3 000 0.60 0.5 0.47 0.61 0.54 0.47 0.60 0.54 0.47 0.6 0.5 0.49 0.61 0.51 0.48 0.60 0.57 0.50 1 500 0.56 0.47 0.43 0.57 0.50 0.4 0.56 0.50 0.4 0.58 0.48 0.44 0.57 0.47 0.44 0.56 0.53 0.46 1 000 0.54 0.45 0.41 0.55 0.47 0.39 0.53 0.47 0.39 0.56 0.44 0.41 0.55 0.44 0.41 0.54 0.50 0.43 750 0.53 0.43 0.40 0.54 0.45 0.38 0.5 0.45 0.37 0.54 0.43 0.41 0.53 0.4 0.39 0.5 0.49 0.40 500 0.50 0.41 0.37 0.51 0.44 0.36 0.50 0.43 0.36 0.5 0.41 0.38 0.51 0.40 0.38 0.50 0.46 0.38 300 0.49 0.39 0.35 0.49 0.41 0.33 0.47 0.41 0.33 0.49 0.38 0.35 0.48 0.38 0.35 0.47 0.43 0.36 100 0.45 0.35 0.30 0.46 0.37 0.9 0.43 0.37 0.9 0.46 0.34 0.31 0.44 0.33 0.30 0.44 0.39 0.31 AT START 0.40 0.30 0.6 0.40 0.3 0.4 0.37 0.31 0.3 0.39 0.7 0.5 0.37 0.6 0.4 0.35 0.31 0.4 36

Screw jacks MA Series - ptins Cver The husing f the screw jacks MA Series is enclsed with tw cvers, ne n the tp and ne n the bttm, available in tw executins: CB (lw cver) r CA (raised cver). The raised cver CA allws the fitting f brnze guide bushes r prtective tubes. The raised cver CA with tleranced uter diameter acts as a centring register f the screw jack inside the machine structure. Screw jacks with travelling nut (Md.B) have raised cver as standard, munted n the screw jack husing n the ppsite side f the acme screw, t prtect the rtating threaded screw end. Ordering cde: CB-CB, CB-CA, CA-CB, CA-CA (based n applicatin requirements) Brnze guide Available fr screw jacks with travelling screw (Md. A) nly. The brnze guide keep the caxial psitin f the acme screw with the internal thread f the wrm wheel. It is munted n the raised cver CA n bth sides f the screw jack husing. Brnze guides are recmmended in case f even lw radial lad. Ordering cde: G-G If the screw jack needs a prtective tube in additin t the brnze guides, it is screwed t the brnze guide thread. Ordering cde: G-TG Use f brnze guides is indispensable in applicatins with trunnin munt! 37

Screw jacks MA Series - ptins Stp nut Available fr screw jacks with travelling screw (Md. A) nly. The mechanical stp prevents the acme screw thread unscrewing clear f the screw jack husing. It is a washer pinned at the acme screw end (ppsite the attachment side) that blcks the screw translatin when reaching the relative stp. The acme screw length is defined t allw, under nrmal use, at the maximum extended psitin, 0 mm f additinal strke (safety extra-strke). If the mechanical stp reaches accidentally the relative stp, it is necessary t check the screw jacks cmpnents t verify pssible damages. Ordering cde: SN Prtective tube Available fr screw jacks with travelling screw (Md. A) nly. The prtective tube is screwed in the raised cver CA and enclses the acme screw belw the husing, prtecting it frm damages and/r envirnment pllutin such as dust, water, etc. Furthermre, it allws the fitting f ther ptins such as limit switches and/r anti-turn device. Material is aluminium r steel if anti-turn device is fitted. Ordering cde: T Anti-turn device Available fr screw jacks with travelling screw (Md. A) nly. The anti-turn device is necessary when the lad t be lifted may turn, i.e. the screw guidance des nt prevent rtatin, r in case the applicatin des nt prperly allw the acme screw reactin t permit the translatin. Functining: a steel key is fitted alng the prtective tube and a keyed brnze washer is fixed at the end f the acme screw; this prevents the screw rtatin and frces the screw translatin. Up t screw jack size 50 (acme screw Tr 40 7) included, the anti-turn device has nly ne key; frm size 80 (acme screw Tr 55 9) n, it has tw keys. The brnze bush als acts as a stp nut against acme screw unthreading. Ordering cde: AR 38

Screw jacks MA Series - ptins Trunnin munt Available fr bth screw jacks mdels: with travelling screw (Md. A) and with travelling nut (Md. B). The trunnin munt blts n t either the tp r the bttm f the screw jack husing and allws pivting f the screw jack arund the axis defined by trunnin munt s lateral pins. On screw jack Md. A: the acme screw attachment must have a cylindrical hle with axis parallel t the trunnin munt lateral pin axis. On screw jack Md. B: the part f the machine where the brnze nut MB is fixed must have tw lateral cylindrical pins (r hles) with axis parallel t the trunnin munt lateral pin axis. MA 5 MA 10 MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 A 14 140 175 35 35 76 330 415 B 80 105 130 160 160 00 30 300 &D 15 0 5 45 45 50 70 80 &D 1 0 5 30 50 50 60 80 90 H 0 5 30 50 50 60 80 90 l 15 0 0 30 30 40 45 60 S 130 145 00 60 60 305 360 440 S 1 50.5 56.5 80 104.5 104.5 119.5 13 181.5 S 79.5 88.5 10 155.5 155.5 185.5 8 58.5 mass [kg] 0.8 1.6 3. 9.8 9.8 15.8 9 5 Ordering cde: SC (TF side) Ordering cde: SC (ppsite TF side) screw jacks Md. A with SC fitted n side twards acme screw attachment screw jacks Md. A with SC fitted n side ppsite t acme screw attachment Ordering cde: SC (screw side) screw jacks Md. B with SC fitted n side twards acme screw Ordering cde: SC (ppsite screw side) screw jacks Md. B with SC fitted n side ppsite t acme screw 39

Screw jacks MA Series - ptins Bellws Available fr bth screw jacks mdels: with travelling screw (Md. A) and with travelling nut (Md. B). In applicatins with particular envirnment cnditins, bellws prtect the screw frm cntaminants. The usually supplied bellws are circular, sewn (duble seam), in NYLON with a PVC utside and inside cating. Fr special applicatin requirements, different executins r materials can be supplied n request. The bellws cause changes t the retracted and extended lengths and screw jack verall dimensins stated in the catalgue. On request, rders will be acknwledged with a screw jack drawing giving exact dimensins. Screw jacks MA Md.A with bellws Usually, bellws are fitted between the acme screw attachment and wrm gearbx, and at the ppsite side the prtectin tube is fitted. In case the screw jack shall have a screw withut attachment, it is recmmended t rder it with a sketch f the required bellws attachment dimensins. STROKE (3 hles at 10 ) Fllwing table shws the bellws available n stck: executin: circular, sewn; material: NYLON with a PVC utside and inside cating; strke: 300 mm, 600 mm r 1 000 mm; n request, bellws fr different strke can be supplied; dimensins f tw attachments suitable fr fitting t the screw jack husing and t the flange end P. Ordering cde: B MA 5 MA 10 MA 5 MA 50 MA 100 D 65 80 100 10 10 L min (fr C300) 80 40 50 L min (fr C600) 180 90 90 90 90 L min (fr C1000) 144 144 144 c 6 31 41 51 71 l 10 10 0 5 30 F 65 80 100 10 160 PCD 55 68 88.5 107 140 b 4.5 5.5 5.5 6.5 6.5 40

Screw jacks MA Series - ptins Screw jacks MA Md.B with bellws Bellws are nrmally fitted between the screw jack husing and the nut and als between the nut and the acme screw end. Sme applicatins may require bellws in nly ne f these tw psitin. The dimensin f the bellws attachment between screw jack husing and brnze nut is determined by the screw jack s dimensins while the bellws attachment between brnze nut and acme screw end depends n the applicatin structure the bellws shall fit. Lc X Lc Lc Lc L acme thread X STROKE L acme thread STROKE X L acme thread STROKE Y L acme thread STROKE Y Lc X L acme thread X STROKE Y Y Y STROKE FLANGE COLLAR - bellws attachment dimensins t be defined 41

Screw jacks MA Series - ptins Safety nut Available fr bth screw jacks mdels: with travelling screw (Md. A) and with travelling nut (Md. B). The safety nut is a back-up feature t prevent the lad drpping in an uncntrlled manner in the event f wrking nut thread breaking due t verlad r achieving f critical wear level (wear level that causes the breaking f the remaining thread sectin with nrmal wrking lad nly). The safety nut is an extensin t the standard nut (wrmwheel inside Md.A screw jacks r external travelling nut f Md.B screw jacks) and changes the screw jack verall dimensins. The safety nut wrks with ne particular lad directin nly. Its psitin as regards the standard nut is cnditined by the lad directin. Fllwing drawings shw a screw jack with safety nut in case f acme screw subjected t push lad. In case f pull lad, the psitin f the nut wuld be n the ppsite side f the screw jack husing (Md. A) r f the external travelling nut (Md. B). By new screw jacks, the distance b between standard nut and safety nut is equal t the half f the prfile pitch (P) f the acme thread. Screw jacks MA Md.A with safety nut 4 MA 5 MA 10 MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 a 8 33 35 50 70 70 95 115 b.5 3 3.5 4.5 6 6 8 c 1 1.5.5.5 3.5 5 5 7 c 9.5 35 37.5 5.5 73.5 75 100 1 &d 30 35 50 60 70 80 100 140 Ordering cde: MSA push screw jacks Md.A with safety nut fr push lad Ordering cde: MSA pull screw jacks Md.A with safety nut fr pull lad Screw jacks MA Md.B with safety nut MA 5 MA 10 MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 a 8 33 35 50 70 70 95 115 b.5 3 3.5 4.5 6 6 8 &d 30 40 50 60 75 80 100 150 Ordering cde: SBC push Ordering cde: SBC pull screw jacks Md.B with safety nut fr push lad screw jacks Md.B with safety nut fr pull lad

Screw jacks MA Series - ptins Acme thread wear level check Available fr bth screw jacks mdels: with travelling screw (Md. A) and with travelling nut (Md. B). Due t wrking cnditins (lad, speed, temperature, lubricatin), the thread f the wrking nut wears ut. Sme applicatins require the pssibility t keep the current wear level under cntrl t prevent reaching the critical wear level and cnsequent thread breaking by replacing the nut early. P P/4 Usually, a value equal t 1/4 f the prfile pitch (P) f the acme thread is cnsidered as max. wear level admitted. P With thread wear, the distance b between wrking nut and safety nut (see drawings n previus page) reduces t the wrking nut. By measuring this change, it is pssible t get the current wear level f the thread. Fllwing drawings shw the pssible slutins: - check f dimensin c 1, c, c 3 r c 4 fr screw jacks with travelling screw (Md. A) r f distance b fr screw jacks with travelling nut (Md. B) - see drawings n previus page and belw - cmparing the current value with the initial ne (with new screw jack), - appliance f an electric switch (see drawings belw) which is activated when the pre-established wear level is reached giving an electric signal. P/4 Thread wear cntrl n screw jacks MA Series Md.A Thread wear cntrl n screw jacks MA Series Md.B 43

Screw jacks MA Series - ptins Wrmwheel rtatin detectr Available fr bth screw jacks mdels: with travelling screw (Md. A) and with travelling nut (Md. B). Sme applicatins require the pssibility t verify if the wrmwheel rtates while the wrm shaft is mving in rder t get infrmatin abut the gd cnditin and functining f the wrmwheel tthing. Functining n screw jacks with travelling screw (Md.A): usually, this device is required fr applicatins where a safety nut is already present. A crwn f empty and full spaces (created by machining the safety nut end, see picture n the right), while rtating, activates a crrespnding prximity switch. As utput f such prximity switch, activated and deactivated by the alternatin f empty and full spaces, a train f impulses is generated and it cnfirms the rtatin f the wrmwheel. On the cntrary, the cnstant utput signal f the prximity means the stp f the wrmwheel. Functining n screw jacks with travelling nut (Md. B): n the ppsite side f the acme screw, a cylindrical element, machined in rder t have a crwn f empty and full spaces (see picture n the right), is fixed t the wrmwheel. While rtating, it activates and deactivates a crrespnding prximity switch. As utput f such prximity switch, activated and deactivated by the alternatin f empty and full spaces, a train f impulses is generated and it cnfirms the rtatin f the wrmwheel. On the cntrary, the cnstant utput signal f the prximity means the stp f the helical wrmwheel. Magnetic strke end switches Available fr screw jacks with travelling screw (Md. A) and fr size 5, 10 5. Nt cmpatible with antiturn device AR. Functining: the magnetic strke end switches are sensrs with reed cntact and are fixed with a clamp n the prtective tube T, made in aluminium r ther nn-magnetic metal. They are activated by the magnetic field generated by a magnetic ring fitted n the acme screw end. In case the screw jack is nt stpped after the sensr activatin, withut magnetic field the sensr restres the riginal state. In case the limit switches are used t stp the screw jack, we recmmend t prvide fr an electric cnnectin in rder t latch the signal and t prevent that the screw jack mves again in the same directin. Screw jacks with magnetic limit switches are supplied with tw sensrs fr the acme screw extreme psitins. On request, extra switches fr intermediate distances can be supplied. The psitin f the sensrs alng the tube is adjustable. Technical details: Cntact: nrmally nrmally CLOSED (NC) OPEN (NO) Vltage range: (3... 130) Vdc / (3... 130) Vac Switching capacity: 0 W / 0 VA Max. switching current at 5 C: 300 ma (resistive lad) Max. inductive lad: 3 W (simple cil) Wires: 0.5 mm Cable length: m Ordering cde: FCM-NC fr screw jacks with nrmally clsed magnetic switches FCM Ordering cde: FCM-NO fr screw jacks with nrmally pen magnetic switches FCM 44

Screw jacks MA Series - ptins Inductive prximity strke end switches Available fr screw jacks with travelling screw (Md.A) nly. Functining: prximity limit switches are PNP inductive sensrs with nrmally CLOSED cntact (NC) fitted n the prtective tube and activated by the metallic ring fixed n the acme screw end. In case the screw jack is nt stpped after the sensr activatin, when the metallic ring mves away the sensr restres the riginal state (becmes deactivated). In case the limit switches are used t stp the screw jack, we recmmend t prvide fr an electric cnnectin in rder t latch the signal and t prevent that the screw jack mves again in the same directin. Screw jacks with prximity limit switches are supplied with tw sensrs fr the acme screw extreme psitins. Extra switches fr intermediate distances available n request. Standard executin: nt adjustable FCP Executin n request: adjustable FCP On standard executin, the sensrs psitin alng the tube is nt adjustable and is nt angularly fixed. On request, it can be supplied with angular psitin at custmer s indicatin. Executin with axial adjustment f the sensrs psitin available n request. Technical details: Type: inductive, PNP Cntact: nrmally CLOSED (NC) Vltage range: (10... 30) Vdc Max. utput current: 00 ma Vltage drp (activated sensr): < 1.8 V Wires: 3 0. mm Cable length: m Ordering cde: standard FCP (nt adjustable) adjustable FCP 45

Screw jacks MA Series - ptins Adjustable backlash Available fr bth screw jacks mdels: with travelling screw (Md.A) and with travelling nut (Md.B). The adjustment f the axial backlash in the acme thread is a feature recmmended fr applicatins where lad acts in bth directins and/r there are vibratins. It can be btained by using f adjustable backlash device RMG, which reduces axial backlash between acme screw and brnze nut allwing high psitining precisin. With the RMG device it is als pssible t cmpensate the wear f the nut thread. On screw jacks with travelling screw (Md. A), the wrking nut (the helical wrmwheel inside the husing) is split in tw halves (see picture n the right). By screwing the adjustment cver (after the release f the lcking screw), the tw halves f the wrmwheel clse in until the axial backlash is set t zer. The thread f ne f the tw halves f the wrmwheel will tuch ne flank f the acme screw thread, while the thread f the ther half will tuch the ppsite flank. Bth nuts wrk in a perfectly symmetric way, therefre the lad capacity fr bth push r pull lad is the same and is equivalent t the nminal capacity. Adjustment cver Lcking screw On screw jacks with travelling nut (Md. B), the RMG device is made by tw nuts (main nut and secndary nut, see picture n the right). It allws t adjust the axial backlash, but nt t wrk with maximum lad capacity in bth directins. We recmmend t carefully evaluate the munting psitin t make the main nut wrk in the prevailing lad cnditin. In any case, please cntact SERVOMECH Engineering Dpt. fr prper and suitable evaluatins. By screwing the adjustment screws the tw nuts clse in and, as a cnsequence, the acme thread f ne f the tw nuts will near ne side f the acme screw thread, while the thread f the ther will near the ppsite side f the acme screw. In this way the axial backlash will be reduced as required. The trque transmissin frm the secnd nut t the main nut is given by the frnt clutch between the tw nuts. An excessive backlash reductin can reduce screw jack efficiency. Fr further details, please cntact SERVOMECH Engineering Dpt. Cdice: RMG Lcking screws Sectin A - A Frnt clutch A Adjusting screws A 46

Screw jacks MA Series - ptins Material: stainless steel Fr applicatins in particular envirnment cnditins r in fd industry, the screw jacks MA Series can be supplied with stainless steel acme screw and/r screw attachment n request. Available steels: AISI 303, AISI 304, AISI 316. Ordering cde: TR inx stainless steel acme screw fr screw jacks Md. A r Md. B Ordering cde: P inx stainless steel flange end P, fr screw jacks Md. A Ordering cde: TF inx stainless steel rd end TF, fr screw jacks Md. A IEC Mtr cnnectin MA 5 MA 10 MA 5 MA 50 MA 80 MA 100 MA 00 MA 350 63 B5 F F F B14 F F 71 B5 B B F F F B14 B B F 80 B5 B F F F B14 B 90 B5 B B B F F B14 B B B 100-11 B5 B B B F B14 B B B 13 B5 B B 160 B5 B F - plug-in IEC flange and hllw shaft B - bell-husing + cupling IEC Flange r bell-husing at drawing fr hydraulic mtrs r servmtrs cnnectin available n request. 47

Screw jacks MA Series - cding descriptin Screw jacks MA Series with travelling screw (Md.A) MA 50 Md.A RL1 Vers. 3 (80 B5) U-RH C300 1 3 4 5 6 7 TF B G CA MSA / RMG / CA G SC T AR FCP 8... 9... 10 AC 3-phase brake mtr 0.75 4 ples 30/400 V 50 Hz IP 55 Isl. F 11 1 MA (screw jack MA Series) Screw jack size 5... 350 page 0-1, 4-5, 8, 31 3 Md.A (Mdel: travelling screw) 4 Rati and number f acme screw starts page 0-1, 4-5, 8, 31 5 Input versins Vers.1, Vers., Vers.3, Vers.4, Vers.5, Vers.6 page 7 6 Screw jack munting and input shaft psitin U-RH, U-LH, D-RH, D-LH, H-RH, H-LH page 7 7 Screw jack strke length (ex.: C300 = 300 mm strke) 8 Optins NF, P, TF, N B SC G CB, CA RMG SN T AR FCM-NC FCP-NC Screw end Bellws Trunnin munt Brnze guide Lw cver, raised cver Adjustable backlash Stp nut Prtective tube Anti-turn device Magnetic strke end switches (nrmally clsed) Prximity strke end switches (PNP, nrmally clsed) 9 Other ptins example: encder (with all relevant data) 10 Further specificatins example: stainless steel acme screw AISI 303 example: lw temperature lubricant 11 Mtr specificatins page 34-35 page 40 page 39 page 37 page 37 page 46 page 38 page 38 page 38 page 44 page 45 1 Cding frm page 49 13 Applicatin sketch 48

Screw jacks MA Series - cding descriptin Screw jacks MA Series with travelling screw (Md.A) UPWARD munting DOWNWARD munting P TF FCP NF FCM AR T B SN SC SC G G CA CA CB CB RMG Versin Versin RMG CB CA G SC SN T CB CA G SC B AR FCM NF FCP TF P PUSH PULL MSA MSA PULL PUSH UPWARD munting DOWNWARD munting 49

Screw jacks MA Series - cding descriptin Screw jacks MA Series with travelling nut (Md.B) MA 50 Md.B RL1 Vers. 3 (80 B5) U-RH C300 1 3 4 5 6 7 N B MB+SBC B1 CB / CA 8... 9... 10 AC 3-phase brake mtr 0.75 4 ples 30/400 V 50 Hz IP 55 Isl. F 11 1 MA (screw jack MA Series) Screw jack size 5... 350 page 0-1, 4-5, 8, 31 3 Md.B (Mdel: travelling nut) 4 Rati and number f acme screw starts page 0-1, 4-5, 8, 31 5 Input versins Vers.1, Vers., Vers.3, Vers.4, Vers.5, Vers.6 page 7 6 Screw jack munting and input shaft psitin U-RH, U-LH, D-RH, D-LH, H-RH, H-LH page 7 7 Screw jack strke length (ex.: C300 = 300 mm strke) 8 Optins N B 1, B MB SBC RMG CB, CA Screw end Bellws Wrking nut Safety nut Adjustable backlash Lw cver, raised cver 9 Other ptins example: encder (with all relevant data) 10 Further specificatins example: stainless steel acme screw AISI 303 example: lw temperature lubricant 11 Mtr specificatins page 34-35 page 41 page 34-35 page 4 page 46 page 37 1 Cding frm page 51 13 Applicatin sketch 50

Screw jacks MA Series - cding descriptin Screw jacks MA Series with travelling nut (Md.B) UPWARD munting DOWNWARD munting CA CB Versin CB RMG CA MB+SBC B1 MB MB+SBC MB B N MB+SBC PULL MB MB+SBC PUSH MB MB PUSH MB+SBC MB PULL MB+SBC N B MB MB+SBC MB B1 MB+SBC CA CB RMG Versin CB CA UPWARD munting DOWNWARD munting 51

Screw jacks MA Series Screw jacks MA Series with travelling screw (Md. A) - spare parts 13.1 4 1 11 10.1, 10.3 7 1 6 0 4 5 3 5 3 18 18 1 Gear bx Wrm shaft Vers. 3 Wrm shaft Vers.4 4 Wrmwheel Md.A 5 Lw cver CB 6 Raised cver CA 7 Travelling acme screw 8 Prtective tube 9.1 Flange fr IEC mtr 9. Bell-husing fr IEC mtr 10.1 Input shaft bearing 10. Input shaft bearing 10.3 Input shaft bearing 11 Shim washer 1 Circlip 13.1 Radial lubricant seal 13. Radial lubricant seal 13.3 Radial lubricant seal 14 Circlip 15 Flange - bell-husing fixing screw 16 Cupling 17 Semi-cupling lcking grub 18 Key 19 Shim washer 0 O-ring lubricant seal 6 4 19 0 6 1 18 10.1 11 4 3 10. 9.1 1 13.1 10.1 11 14 13. 1 14 9. 15 13.3 16 17 1 8 5 1 Radial lubricant seal Wrmwheel bearing 3 Threaded cver lcking grub 4 Oil drain plug 5 Oil level plug 6 Breather 7 Cver 7 Fr spare parts rders we recmmend yu t refer t the relative prduct serial number, marked n the prduct label fixed n the screw jack husing. 5

Screw jacks MA Series Screw jacks MA Series with travelling nut (Md. B) - spare parts 13.1 11 1 10.1, 10.3 6 8 7 1 5 0 4 4 9 1 Gear bx Wrm shaft Vers. 3 Wrm shaft Vers.4 4 Wrmwheel Md.B 5 Lw cver CB 6 Raised cver CA 7 Rtating acme screw 8 Brnze nut MB 9.1 Flange fr IEC mtr 9. Bell-husing fr IEC mtr 10.1 Input shaft bearing 10. Input shaft bearing 10.3 Input shaft bearing 11 Shim washer 1 Circlip 13.1 Radial lubricant seal 13. Radial lubricant seal 13.3 Radial lubricant seal 14 Circlip 6 15 Flange - bell-husing fixing screw 16 Cupling 17 Semi-cupling lcking grub 18 Key 19 Shim washer 0 O-ring lubricant seal 1 Radial lubricant seal Wrmwheel bearing 3 Threaded cver lcking grub 4 Oil drain plug 3 5 Oil level plug 5 6 Breather 7 Plain washer 3 18 8 Lck nut 9 Grease nipple 4 18 10.1 4 1 18 3 9.1 10. 14 11 1 9. 14 19 0 10.1 11 1 13.1 13. 13.3 15 17 6 16 1 7 8 Fr spare parts rders we recmmend yu t refer t the relative prduct serial number, marked n the prduct label fixed n the screw jack husing. 53

Screw jacks SJ Series Screw jacks SJ Series with travelling screw (Md.A) STRUCTURAL ELEMENTS 1 11 7 1 3 6 5 10 3 9 11 4 8 1 - acme screw in steel C 43 (UNI 7847), rlled r whirled thread - wrm shaft with true invlute, grund wrm prfile ZI (UNI 4760), made in steel, case-hardened 3 - brnze wrmwheel with internal nut, tthing with true invlute prfile ZI (UNI 4760) 4 - thrust ball bearing fr high lad capacity 5 - mnblck gear bx 6 - threaded cver with guide fr acme screw; may be used as a spigt diameter 7 - grub screw which prevents the threaded cver unscrewing 8 - guide fr acme screw; may be used as a spigt diameter 9 - lng-life synthetic grease lubricated wrm gearbx 10 - grease nipple 11 - radial lubricant seal 1 - O-Ring as lubricant seal 54

Screw jacks SJ Series Screw jacks SJ Series with travelling nut (Md.B) STRUCTURAL ELEMENTS 1 1 14 9 17 5 4 11 10 3 16 6 15 13 8 7 1 acme screw - wrmwheel fixing system thrugh sltted spring pins fr screw jacks with screw frm Tr 18 4 t Tr 55 9 18 17 4 3 acme screw - wrmwheel fixing system with metric thread and grub screws fr screw jacks with screw frm Tr 60 1 t Tr 160 16 1 - acme screw in steel C 43 (UNI 7847), whirled thread - brnze travelling nut with flange 3 - wrm shaft with true invlute, grund wrm prfile ZI (UNI 4760), made in steel, case-hardened 4 - brnze wrmwheel with true invlute prfile ZI (UNI 4760) 5 - cast irn supprt f the wrmwheel brnze rim 6 - acme screw fixed t the wrmwheel thrugh LEFT-HAND (fr push lad) r RIGHT-HAND (fr pull lad) metric thread 7 - lck nut with the ppsite directin metric thread t ensure safe acme screw fixing 8 - acme screw wrmwheel pins against unscrewing 9 - sltted spring pin 10 - thrust ball bearing fr high lad capacity 11 - mnblck gear bx 1 - threaded cver with guide fr acme screw; may be used as a spigt diameter 13 - grub screw which prevents the threaded cver unscrewing 14 - guide fr acme screw; may be used as a spigt diameter 15 - lng-life synthetic grease lubricated wrm gearbx 16 - grease nipple 17 - radial lubricant seal 18 - O-Ring as lubricant seal 55

Screw jacks SJ Series Screw jacks SJ Series with 1-start acme screw TECHNICAL SPECIFICATIONS SCREW JACK SIZE SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 SJ 150 SJ 00 Lad capacity [kn], (push - pull) 5 10 5 50 100 150 00 1-start acme screw Tr 18 4 Tr 5 Tr 30 6 Tr 40 7 Tr 55 9 Tr 60 1 Tr 70 1 Wrm gear centre distance [mm] 5 30 50 63 63 80 90 RH 1 : 4 (5 : 0) Available rati RV 1 : 6.5(4 : 5) 1 : 4 (4 : 16) 1 : 6 (4 : 4) 1 : 7 (4 : 8) 1 : 7 (4 : 8) 1 : 8 (4 : 3) 1 : 7 (4 : 8) RN 1 : 1.5( : 5) 1 : 16 ( : 3) 1 : 18 ( : 36) 1 : 14 ( : 8) 1 : 14 ( : 8) 1 : 4 RL 1 : 5 1 : 4 1 : 4 1 : 8 1 : 8 1 : 3 1 : 8 RH1 1 Strke [mm] fr 1 input shaft revlutin Rati RV1 0.64 1.5 1 1 1.8 1.5 1.71 RN1 0.3 0.31 0.33 0.5 0.64 0.5 RL1 0.16 0.1 0.5 0.5 0.3 0.375 0.43 RH1 0.5 Starting efficiency Rati RV1 0.5 0.6 0.0 0.18 0.0 0.0 0.19 RN1 0.1 0.0 0.16 0.15 0.17 0.13 RL1 0.16 0.16 0.13 0.11 0.13 0.1 0.1 RH1 0.35 3 Running efficiency at 1500 rpm ( 1 ) Rati RV1 0.34 0.36 0.34 0.3 0.33 0.36 0.36 RN1 0.9 0.8 0.7 0.8 0.9 0.9 RL1 0.5 0.5 0.5 0.3 0.4 0.6 0.5 RH1 3.8 Starting trque n input shaft at max. lad [] Rati RV1.5 9 0 44 77 10 35 RN1 1.7 3.5 8.3 5 47 6 RL1 1.5 7.6 18 34 50 15 RH1 0.40 Max. permissible perating pwer ( ) [] Rati RV1 0.40 0.60 1..4.5 3 4 RN1 0.0 0.30 0.7 1.7 1.8.6 RL1 0.17 0.5 0.6 1. 1..3 3. Reactive trque n acme screw (nut) required at max. lad [] 8 0 65 165 460 800 1 00 Gear bx material casting in aluminium ally EN 1706 - AC-AlSi10Mg T6 casting in cast irn EN-GJL-50 (UNI EN 1561) Mass f screw jack withut acme screw [kg] 1.5.3 10.4 5 35 55 75 Mass fr every 100 mm f acme screw [kg] 0.16 0.3 0.45 0.8 1.6 1.8.5 ( 1 ) - efficiency figures at different input speed n page 61 ( ) - THERMAL limit, referred t wrk with max. duty cycle 30 % ver 10 min time perid (0 % ver 1 hur time perid) at 5 C envirnment temperature 56

Screw jacks SJ Series Screw jacks SJ Series with 1-start acme screw TECHNICAL SPECIFICATIONS SJ 50 SJ 300 SJ 350 SJ 400 SJ 600 SJ 800 SJ 1000 SCREW JACK SIZE 50 300 350 400 600 800 1000 Lad capacity [kn], (push - pull) Tr 80 1 Tr 90 1 Tr 100 1 Tr 100 1 Tr 10 14 Tr 140 14 Tr 160 16 1-start acme screw 90 110 110 140 140 00 00 Wrm gear centre distance [mm] RH 1 : 7 (4 : 8) 3 : 9 3 : 9 3 : 8 3 : 8 3 : 35 3 : 35 RV RN Available rati 1 : 8 1 : 30 1 : 30 1 : 9 1 : 9 1 : 36 1 : 36 RL RH1 1.71 1.4 1.4 1.9 1.5 1. 1.37 RV1 Rati RN1 Strke [mm] fr 1 input shaft revlutin 0.43 0.4 0.4 0.41 0.48 0.39 0.44 RL1 RH1 0.17 0.15 0.13 0.13 0.13 0.1 0.11 RV1 Rati RN1 Starting efficiency 0.11 0.09 0.09 0.08 0.08 0.08 0.07 RL1 RH1 0.35 0.31 0.9 0.30 0.31 0.8 0.8 RV1 Rati RN1 0.4 0. 0.1 0.1 0.1 0.1 0.19 RL1 RH1 360 350 450 540 960 1175 1675 RV1 Rati RN1 138 175 5 70 485 605 860 RL1 RH1 Running efficiency at 1500 rpm ( 1 ) Starting trque n input shaft at max. lad [] 3 4 8 8 15 17 0 5 RV1 Rati RN1 3. 6.5 6.5 1 14 17 RL1 Max. permissible perating pwer ( ) [] 1 650 150 700 3 100 5 500 8 500 1 000 Reactive trque n acme screw (nut) required at max. lad [] casting in cast irn EN-GJL-50 (UNI EN 1561) casting in steel Fe G 60 (UNI 4010) Gear bx material 75 10 10 60 60 800 800 Mass f screw jack withut acme screw [kg] 3.4 4.4 5.5 5.5 7.9 10.9 14. Mass fr every 100 mm f acme screw [kg] ( 1 ) - efficiency figures at different input speed n page 61 ( ) - THERMAL limit, referred t wrk with max. duty cycle 30 % ver 10 min time perid (0 % ver 1 hur time perid) at 5 C envirnment temperature 57

Screw jacks SJ Series - 1-start acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 30 % ver 10 min time perid r 0 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. SJ 5 5 kn 3 kn 1 kn RH1 RV1 RN1 RL1 RATIO RATIO RATIO RH1 RV1 RN1 RL1 RH1 RV1 RN1 RL1 RH1 RV1 RN1 RL1 1 500 5 16 8 4 1.9 0.9 1.3 0.0 0.7 0.1 0.5 0.07 1.1 0.17 0.8 0.1 0.4 0.07 0.3 0.04 0.4 0.06 0.3 0.04 0.1 0.0 0.1 0.01 1 000 16.7 10.7 5.3.7.0 0.1 1.4 0.14 0.8 0.09 0.5 0.05 1. 0.1 0.8 0.09 0.5 0.05 0.3 0.03 0.4 0.04 0.3 0.03 0. 0.0 0.1 0.01 750 1.5 8 4.1 0.16 1.4 0.11 0.8 0.07 0.5 0.04 1.3 0.10 0.8 0.07 0.5 0.04 0.3 0.03 0.4 0.03 0.3 0.0 0. 0.01 0.1 0.01 500 8.3 5.3.7 1.3.3 0.1 1.5 0.08 0.9 0.05 0.6 0.03 1.4 0.07 0.9 0.05 0.5 0.03 0.3 0.0 0.5 0.0 0.3 0.0 0. 0.01 0.1 0.01 300 5 3. 1.6 0.8.4 0.08 1.6 0.05 1.0 0.03 0.6 0.0 1.5 0.05 1.0 0.03 0.6 0.0 0.4 0.01 0.5 0.0 0.3 0.01 0. 0.01 0.1 0.01 100 1.7 1.1 0.5 0.3.8 0.03.0 0.0 1.1 0.01 0.7 0.01 1.7 0.0 1. 0.01 0.7 0.01 0.4 0.01 0.6 0.01 0.4 0.01 0. 0.01 0.1 0.01 50 0.8 0.5 0.3 0.1 3.1 0.0.0 0.01 1. 0.01 0.7 0.01 1.8 0.01 1. 0.01 0.7 0.01 0.4 0.01 0.6 0.01 0.4 0.01 0. 0.01 0.1 0.01 3 SJ 10 10 kn 8 kn 6 kn kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 1 500 31.3 7.8 5. 5.6 0.87 1.8 0.8 1.3 0.1 4.4 0.70 1.4 0. 1.1 0.17 3.3 0.5 1.1 0.17 0.8 0.13 1.1 0.17 0.4 0.06 0.3 0.04 1 000 0.8 5. 3.5 5.8 0.63 1.8 0.19 1.4 0.15 4.7 0.49 1.5 0.15 1.1 0.1 3.5 0.37 1.1 0.1 0.8 0.09 1. 0.1 0.4 0.04 0.3 0.03 750 15.6 3.9.6 6.0 0.47 1.9 0.15 1.5 0.11 4.8 0.38 1.5 0.1 1. 0.09 3.6 0.8 1. 0.09 0.9 0.07 1. 0.10 0.4 0.03 0.3 0.0 500 10.4.6 1.7 6.4 0.34.0 0.11 1.6 0.08 5.1 0.7 1.6 0.08 1.3 0.07 3.9 0.0 1. 0.06 1.0 0.05 1.3 0.07 0.4 0.0 0.3 0.0 300 6.3 1.6 1.1 6.6 0.1.1 0.07 1.7 0.05 5.3 0.17 1.7 0.05 1.3 0.04 4.0 0.13 1.3 0.04 1.0 0.03 1.3 0.04 0.4 0.01 0.3 0.01 100.1 0.5 0.4 7.1 0.08.3 0.0.0 0.0 5.7 0.06 1.8 0.0 1.6 0.0 4.3 0.05 1.4 0.0 1. 0.01 1.4 0.0 0.5 0.01 0.4 0.01 50 1.1 0.3 0. 7.4 0.04.5 0.01.1 0.01 5.9 0.03.0 0.01 1.7 0.01 4.4 0.0 1.5 0.01 1.3 0.01 1.5 0.01 0.5 0.01 0. 0.01 SJ 5 5 kn 0 kn 15 kn 10 kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 1 500 5 8.3 6.3 11.7 1.83 4.8 0.76 3.9 0.61 9.3 1.47 3.9 0.60 3.1 0.49 7.0 1.10.9 0.45.3 0.37 4.6 0.74 1.9 0.30 1.6 0.5 1 000 16.7 5.6 4. 1. 1.8 5.0 0.53 4.1 0.43 9.8 1.03 4.0 0.4 3.3 0.34 7.3 0.77 3.0 0.3.5 0.6 4.8 0.5.0 0.1 1.6 0.18 750 1.5 4. 3.1 1.7 1.00 5. 0.41 4. 0.33 10. 0.80 4. 0.33 3.4 0.7 7.6 0.60 3.1 0.4.5 0.0 5.0 0.40.1 0.16 1.7 0.14 500 8.3.8.1 13.5 0.71 5.5 0.9 4.5 0.4 10.8 0.56 4.4 0.3 3.6 0.19 8.1 0.4 3.3 0.17.7 0.14 5.4 0.8. 0.1 1.8 0.10 300 5 1.7 1.3 14.1 0.44 5.8 0.18 4.8 0.15 11.3 0.35 4.6 0.15 3.9 0.1 8.5 0.7 3.5 0.11.9 0.09 5.6 0.09.4 0.08.0 0.06 100 1.7 0.6 0.4 15.1 0.16 6.5 0.07 5.5 0.06 1.1 0.13 5. 0.05 4.4 0.05 9.0 0.09 3.9 0.04 3.3 0.03 6.0 0.06.6 0.03. 0.03 50 0.8 0.3 0. 15.8 0.08 6.9 0.04 6.0 0.03 1.6 0.07 5.5 0.03 4.8 0.0 9.5 0.05 4.1 0.0 3.6 0.0 3. 0.04.8 0.0.4 0.01 58 SJ 50 50 kn 35 kn 5 kn 10 kn RV1 RN1 R1L RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 1 500 5 1.5 6.3 5.0 3.9 14.4.6 8.5 1.34 17.5.74 10.0 1.58 6.0 0.94 1.5 1.96 7. 1.13 4.3 0.67 5.0 0.78.9 0.45 1.7 0.7 1 000 16.7 8.3 4. 6.5.78 13.3 1.60 9.1 0.96 18.6 1.94 10.7 1.1 6.4 0.67 13.3 1.39 7.6 0.80 4.6 0.48 5.3 0.56 3.1 0.3 1.8 0.19 750 1.5 6.3 3.1 7.4.15 16.0 1.5 9.5 0.74 19. 1.51 11.1 0.87 6.6 0.5 13.7 1.08 7.9 0.6 4.7 0.37 5.5 0.43 3. 0.5 1.9 0.15 500 8.3 4..1 8.8 1.51 16.4 0.86 10.0 0.5 0. 1.06 11.5 0.60 7.0 0.37 14.4 0.75 8. 0.43 5.0 0.6 5.8 0.30 3.3 0.17.0 0.11 300 5.5 1.3 30.5 0.96 17.4 0.55 10.8 0.34 1.3 0.67 1. 0.38 7.6 0.4 15. 0.48 8.7 0.7 5.4 0.17 6.1 0.19 3.5 0.11.1 0.07 100 1.7 0.8 0.4 33.0 0.35 19.3 0.0 1.5 0.13 3.1 0.4 13.5 0.14 8.8 0.09 16.5 0.17 9.7 0.10 6.3 0.07 6.6 0.07 3.9 0.04.5 0.03 50 0.8 0.4 0. 35.0 0.18 1.0 0.11 13.6 0.07 4.3 0.13 14.5 0.08 9.5 0.05 17.4 0.09 10.3 0.05 6.8 0.04 7.0 0.04 4.1 0.0.7 0.01

Screw jacks SJ Series - 1-start acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 30 % ver 10 min time perid r 0 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. SJ 100 100 kn 80 kn 60 kn 40 kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 1 500 3.0 16.0 8.0 16.3.56 37.6 5.91 1.8 3.43 1. 1.9 5.1 3.94 14.6.9 8. 1.8 1 000 1.4 10.7 5.3 39.1 4.10 5.0.6 53.4 5.59 30. 3.16 17.0 1.78 40.0 4.19.6.37 1.7 1.33 6.7.80 15.1 1.58 8.5 0.89 750 16.1 8.0 4.0 68.4 5.37 4. 3.31 6.3.06 54.7 4. 3.6.56 17.7 1.39 41.0 3.17 4.4 1.9 13.3 1.04 7.3.11 16.3 1.8 8.9 0.70 500 10.7 5.3.7 73. 3.83 44.5.34 7.5 1.44 58. 3.05 34.0 1.78 18.5 0.97 43.7.9 5.5 1.33 13.9 0.73 9.1 1.5 17.0 0.89 9.3 0.48 300 6.4 3. 1.6 8.4.59 47.6 1.50 30.6 0.96 63.7.00 35.1 1.10.3 0.70 47.7 1.50 6.3 0.83 16.8 0.53 31.8 1.00 17.5 0.55 11. 0.35 100.1 1.1 0.5 91.5 0.96 55.5 0.58 35.6 0.37 66. 0.69 37.6 0.39 4.0 0.5 49.7 0.5 8. 0.30 18.0 0.19 33.1 0.35 18.8 0.0 1.0 0.13 50 1.1 0.5 0.3 98.9 0.5 59.5 0.31 39.9 0.1 69.0 0.36 40.7 0.1 5.5 0.13 51.7 0.7 30.6 0.16 19.1 0.10 34.5 0.18 0.4 0.11 1.7 0.07 SJ 150 150 kn 10 kn 80 kn 50 kn RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 1 500 37.5 1.5 9.4 34.6 5.43 33.7 5.9 7.6 4.34.4 3.5 18.4.89 3.0 5.0 14.0.0 11.5 1.81 1 000 5 8.3 6.3 46.9 4.91 38. 4.00 37.5 3.93 30.5 3.0 55.3 5.79 5.0.6 0.4.13 34.6 3.6 15.6 1.64 1.7 1.33 750 18.8 6.3 4.7 49.3 3.87 39.0 3.06 86.0 6.75 39.4 3.09 31..45 57.3 4.50 6.3.06 0.8 1.63 35.8.81 16.4 1.9 13.0 1.0 500 1.5 4. 3.1 116 6.06 51.1.68 41.4.17 9.6 4.85 40.9.14 33.1 1.73 61.7 3.3 7.3 1.43.1 1.16 38.6.0 17.0 0.89 13.8 0.7 300 7.5.5 1.9 18 4.01 55.6.75 46.8 1.47 10 3.1 44.5 1.40 37.5 1.18 68.0.14 9.6 0.93 5.0 0.78 4.5 1.34 18.5 0.58 15.6 0.49 100.5 0.8 0.6 140 1.46 64.4 0.67 54.5 0.57 11 1.17 51.6 0.54 43.6 0.46 74.4 0.78 34.4 0.36 9.1 0.30 46.5 0.49 1.5 0. 18. 0.19 50 1.3 0.4 0.3 150 0.78 7.6 0.38 61.4 0.3 10 0.63 58.1 0.30 49.1 0.6 79.9 0.4 38.7 0.0 3.7 0.17 49.9 0.6 4. 0.13 0.5 0.11 SJ 00 00 kn 150 kn 100 kn 50 kn RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 1 500 4.9 10.7 39.6 6.3 6.4 4.15 37.8 5.94 13..08 1 000 8.6 7.1 60.1 6.9 45.1 4.7 81. 8.50 30.0 3.15 40.6 4.5 15.0 1.57 750 1.4 5.4 64.5 5.07 19 10.1 48.4 3.80 86.0 6.76 3.6.53 43.0 3.38 16.1 1.7 500 14.3 3.6 185 9.68 67.6 3.54 139 7.6 50.7.5 9.4 4.84 33.8 1.77 46..4 16.9 0.88 300 8.6.1 01 6.3 75.8.38 151 4.74 56.8 1.79 101 3.16 37.9 1.19 50.3 1.58 18.9 0.60 100.9 0.7 8.39 86.8 0.91 171 1.79 65.1 0.68 114 1.0 43.4 0.45 57.1 0.60 1.7 0.3 50 1.4 0.4 5 1.3 98.9 0.5 189 0.99 74. 0.39 16 0.66 49.4 0.6 6.9 0.33 4.7 0.13 3 SJ 50 50 kn 00 kn 150 kn 100 kn RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 1 500 4.9 10.7 4.9 6.74 8.6 4.49 1 000 8.6 7.1 63.8 6.68 47.9 5.01 87.1 9.1 31.9 3.34 750 1.4 5.4 87.1 6.84 69.7 5.47 5.3 4.10 91.0 7.15 34.8.74 500 14.3 3.6 9.9 4.87 195 10. 74.4 3.89 146 7.65 55.8.9 97.3 5.10 37. 1.95 300 8.6.1 64 8.9 103 3. 11 6.63 8.1.58 158 4.97 61.6 1.93 106 3.31 41.1 1.9 100.9 0.7 313 3.8 119 1.4 51.6 95.1 1.00 188 1.97 71.3 0.75 15 1.31 47.5 0.50 50 1.4 0.4 339 1.77 137 0.7 71 1.4 109 0.57 03 1.06 8.0 0.43 135 0.71 54.7 0.9 59

Screw jacks SJ Series - 1-start acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 30 % ver 10 min time perid r 0 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. SJ 300 300 kn 50 kn 00 kn 100 kn RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 1 500 31.0 10 86.4 13.6 7.0 11.3 130 0.5 57.6 9.05 65.1 10. 8.8 4.5 1 000 0.7 6.7 97.0 10. 176 18.4 80.8 8.46 141 14.8 64.7 6.77 70.4 7.37 3.3 3.39 750 15.5 5 3 17.5 105 8.4 186 14.6 87.4 6.87 149 11.7 69.9 5.49 74.4 5.84 35.0.75 500 10.3 3.3 4 1.7 113 5.93 0 10.6 94.3 4.94 161 8.45 75.5 3.95 80.7 4.3 37.7 1.98 300 6. 70 8.48 11 3.80 5 7.06 101 3.16 180 5.65 80.6.53 90.0.83 40.3 1.7 100.1 0.7 307 3.1 148 1.55 56.68 13 1.9 05.14 98.6 1.03 10 1.07 49.3 0.5 50 1.0 0.3 341 1.78 167 0.87 84 1.49 139 0.73 7 1.19 111 0.58 114 0.59 55.5 0.9 3 SJ 350 350 kn 300 kn 00 kn 100 kn RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 1 500 31.0 10 9. 14.5 61.4 9.65 66.5 10.5 30.7 4.83 1 000 0.7 6.7 119 1.5 10 10.7 149 15.6 68.0 7.1 74.6 7.81 34.0 3.56 750 15.5 5 19 10.1 35 18.5 111 8.68 157 1.3 73.7 5.79 78.3 6.15 36.9.89 500 10.3 3.3 99 15.6 14 7.4 56 13.4 1 6.37 171 8.94 81.1 4.5 85.3 4.47 40.5.1 300 6. 337 10.6 151 4.75 89 9.07 130 4.07 19 6.04 86.4.71 96. 3.0 43. 1.36 100.1 0.7 388 4.06 186 1.95 33 3.48 159 1.67.3 106 1.11 111 1.16 53. 0.56 50 1.0 0.3 45. 08 1.09 364 1.91 178 0.93 43 1.7 119 0.6 11 0.64 59.4 0.31 SJ 400 400 kn 300 kn 00 kn 100 kn RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 1 500 3.1 10.3 15 19.7 06 3.4 94.1 14.8 137 1.6 6.7 9.86 68.7 10.8 31.4 4.93 1 000 1.4 6.9 303 31.7 141 14.7 7 1.8 106 11.1 15 15.9 70.4 7.37 75.8 7.93 35. 3.69 750 16.1 5. 33 5.4 149 11.7 4 19.0 11 8.79 161 1.7 74.6 5.86 80.7 6.34 37.3.93 500 10.7 3.4 344 18.3 166 8.71 58 13.5 15 6.53 17 9.01 83. 4.35 86.1 4.51 41.6.18 300 6.4.1 393 1.4 178 5.60 95 9.7 134 4.0 197 6.18 89.1.80 98.4 3.09 44.5 1.40 100.1 0.7 458 4.79 19.9 343 3.60 164 1.7 9.40 109 1.14 114 1.0 54.7 0.57 50 1.1 0.3 510.67 50 1.31 384.00 187 0.98 55 1.34 15 0.65 18 0.67 6.4 0.33 60 SJ 600 600 kn 500 kn 400 kn 00 kn RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 1 500 37.5 1.1 0 34.5 183 8.8 146 3.0 155 4.4 73. 11.5 1 000 5 8.0 41 5.1 00 1.0 349 36.5 160 16.8 174 18.3 80.0 8.38 750 18.8 6.0 63 0.7 471 37.0 19 17. 377 9.6 175 13.8 188 14.8 87.7 6.88 500 1.5 4.0 608 31.8 9 15.3 507 6.5 43 1.8 405 1. 195 10. 03 10.6 97.4 5.50 300 7.5.4 671 1.1 316 9.94 559 17.6 64 8.8 447 14.1 11 6.6 4 7.03 105 3.31 100.5 0.8 813 8.51 397 4.15 677 7.09 330 3.46 54 5.67 64.77 71.84 13 1.8 50 1.3 0.4 893 4.68 437.9 744 3.90 364 1.91 595 3.1 91 1.5 98 1.56 146 0.76

Screw jacks SJ Series - 1-start acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 30 % ver 10 min time perid r 0 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. SJ 800 800 kn 600 kn 400 kn 00 kn RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 1 500 30 9.7 63 41.4 197 31.0 80 44.0 13 0.8 140.0 65.8 10.3 1 000 0 6.5 84 9.8 47 49.4 13.3 314 33.0 14 14.9 157 16.5 71.1 7.44 750 15 4.9 309 4.3 501 39.4 3 18. 334 6. 155 1. 167 13.1 77.3 6.07 500 10 3. 7 37.8 349 18.3 541 8.4 6 13.7 361 18.9 175 9.15 180 9.45 87.4 4.57 300 6 1.9 87 6.0 379 11.9 60 19.5 84 8.94 414 13.0 190 5.95 07 6.50 94.8.98 100 0.6 978 10. 480 5.0 733 7.68 360 3.77 489 5.1 40.51 44.56 10 1.6 50 1 0.3 1 076 5.63 57.76 807 4.3 395.07 538.8 63 1.38 69 1.41 13 0.69 SJ 1000 1000 kn 800 kn 600 kn 400 kn RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 1 500 34.3 11.1 94 46. 0 34.7 31 49.0 147 3.1 1 000.9 7.4 40 4.1 31 33.7 50 54.5 41 5. 347 36.3 161 16.8 750 17.1 5.6 437 34.3 737 58.0 350 7.5 553 43.5 6 0.6 369 9.0 175 13.7 500 11.4 3.7 1 008 5.8 486 5.4 806 4. 388 0.3 605 31.7 91 15. 403 1.1 194 10.1 300 6.9. 1 148 36.1 541 17.0 918 8.9 433 13.6 689 1.6 35 10. 459 14.4 17 6.80 100.3 0.7 1 397 14.6 679 7.11 1 117 11.7 543 5.69 838 8.77 408 4.7 559 5.85 7.85 50 1.1 0.4 1 544 8.08 760 3.98 1 35 6.47 608 3.18 96 4.85 456.39 618 3.3 304 1.59 Ttal efficiency f screw jack with 1-start acme screw h SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 SJ 150 RATIO RATIO RH1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 RV1 RN1 RL1 1 500 0.35 0.34 0.9 0.5 0.36 0.8 0.5 0.34 0.7 0.5 0.3 0.8 0.3 0.33 0.9 0.4 0.37 0.8 0.6 1 000 0.33 0.3 0.8 0.4 0.34 0.7 0.4 0.3 0.6 0.4 0.30 0.6 0. 0.31 0.7 0.3 0.35 0.5 0.3 750 0.3 0.31 0.7 0.3 0.33 0.6 0.3 0.31 0.5 0.3 0.9 0.5 0.1 0.30 0.6 0. 0.33 0.4 0.3 500 0.30 0.9 0.6 0.1 0.31 0.5 0.1 0.9 0.4 0. 0.8 0.4 0.0 0.9 0.5 0.1 0.31 0.3 0. 300 0.9 0.8 0.5 0.0 0.30 0.4 0.0 0.8 0.3 0.0 0.6. 0.3 0.18 0.7 0.4 0.19 0.8 0.1 0.19 100 0.7 0.6 0.3 0.17 0.8 0. 0.17 0.6 0.0 0.18 0.4 0.1 0.16 0.5 0. 0.17 0.6 0.19 0.16 50 0.6 0.5 0.1 0.16 0.7 0.0 0.16 0.5 0.19 0.17 0.3 0.19 0.15 0.4 0.0 0.16 0.4 0.16 0.15 AT START 0. 0. 0.19 0.15 0.3 0.18 0.14 0.0 0.16 0.13 0.18 0.15 0.11 0.0 0.17 0.13 0.1 0.14 0.13 h SJ 00 SJ 50 SJ 300 SJ 350 SJ 400 SJ 600 SJ 800 SJ 1000 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 RV1 RL1 1 500 0.36 0.6 0.35 0.4 0.30 0. 0.30 0.1 0.30 0.1 0.31 0.1 0.7 0.19 0.8 0.19 1 000 0.34 0.3 0.31 0.1 0.8 0.0 0.6 0.19 0.7 0.19 0.7 0.19 0.4 0.17 0.5 0.18 750 0.3 0.1 0.30 0.0 0.7 0.18 0.5 0.17 0.5 0.18 0.5 0.18 0.3 0.16 0.4 0.16 500 0.30 0.0 0.8 0.18 0.4 0.17 0.3 0.16 0.4 0.16 0.4 0.16 0.1 0.14 0. 0.15 300 0.7 0.18 0.6 0.17 0. 0.16 0.1 0.15 0.1 0.15 0.1 0.15 0.18 0.13 0.19 0.13 100 0.4 0.16 0. 0.14 0.19 0.13 0.18 0.1 0.18 0.1 0.18 0.1 0.16 0.10 0.16 0.10 50 0. 0.14 0.0 0.1 0.17 0.11 0.16 0.11 0.16 0.11 0.16 0.11 0.14 0.09 0.14 0.09 AT START 0.19 0.1 0.17 0.11 0.14 0.09 0.13 0.09 0.13 0.08 0.13 0.08 0.11 0.07 0.11 0.07 3 61

Screw jacks SJ Series Screw jacks SJ Series with -starts acme screw TECHNICAL SPECIFICATIONS SCREW JACK SIZE SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 SJ 150 SJ 00 Lad capacity [kn], (push - pull) 5 10 5 50 100 150 00 -starts acme screw Tr 18 8 (P4) Tr 10 (P5) Tr 30 1 (P6) Tr 40 14 (P7) Tr 55 18 (P9) Tr 60 4 (P1) Tr 70 4 (P1) Wrm gear centre distance [mm] 5 30 50 63 63 80 90 RH 1 : 4 (5 : 0) Available rati RV 1 : 6.5(4 : 5) 1 : 4 (4 : 16) 1 : 6 (4 : 4) 1 : 7 (4 : 8) 1 : 7 (4 : 8) 1 : 8 (4 : 3) 1 : 7 (4 : 8) RN 1 : 1.5( : 5) 1 : 16 ( : 3) 1 : 18 ( : 36) 1 : 14 ( : 8) 1 : 14 ( : 8) 1 : 4 RL 1 : 5 1 : 4 1 : 4 1 : 8 1 : 8 1 : 3 1 : 8 RH1 Strke [mm] fr 1 input shaft revlutin Rati RV1 1.8.5.57 3 3.43 RN1 0.64 0.65 0.67 1 1.9 1 RL1 0.3 0.4 0.5 0.5 0.64 0.75 0.86 RH1 0.3 Starting efficiency Rati RV1 0.3 0.33 0.31 0.9 0.8 0.30 0.8 RN1 0.8 0.6 0.3 0.4 0.3 0.1 RL1 0.1 0.0 0.0 0.18 0.17 0.19 0.18 RH1 0.48 3 Running efficiency at 1500 rpm ( 1 ) Rati RV1 0.45 0.50 0.47 0.46 0.46 0.49 0.48 RN1 0.41 0.38 0.38 0.40 0.40 0.39 RL1 0.33 0.34 0.34 0.33 0.33 0.36 0.36 RH1 5 Starting trque n input shaft at max. lad [] Rati RV1 3. 1. 6.0 56 149 38 391 RN1 1.9 3.9 11.4 33.5 90 114 RL1 1. 3.3 10.0.4 60 94 153 RH1 0.55 Max. permissible perating pwer ( ) [] Rati RV1 0.55 0.80 1.6 3.4 3.5 4 5.5 RN1 0.8 0.40 1.4.4 3.6 RL1 0.5 0.34 0.8 1.6 1.6 3.5 4.4 Reactive trque n acme screw (nut) required at max. lad [] 1 30 100 50 650 1 150 1 700 Gear bx material casting in aluminium ally EN 1706 - AC-AlSi10Mg T6 casting in cast irn EN-GJL-50 (UNI EN 1561) Mass f screw jack withut acme screw [kg] 1.5.3 10.4 5 35 55 75 Mass fr every 100 mm f acme screw [kg] 0.16 0.3 0.45 0.8 1.6 1.8.5 ( 1 ) - efficiency figures at different input speed n page 67 ( ) - THERMAL limit, referred t wrk with max. duty cycle 30 % ver 10 min time perid (0 % ver 1 hur time perid) at 5 C envirnment temperature 6

Screw jacks SJ Series Screw jacks SJ Series with -starts acme screw TECHNICAL SPECIFICATIONS SJ 50 SJ 300 SJ 350 SJ 400 SJ 600 SJ 800 SJ 1000 SCREW JACK SIZE 50 300 350 400 600 800 1000 Lad capacity [kn], (push - pull) Tr 80 4 (P1) Tr 90 4 (P1) Tr 100 4 (P1) Tr 100 4 (P1) Tr 10 8 (P14) Tr 140 8 (P14) Tr 160 3 (P16) -starts acme screw 90 110 110 140 140 00 00 Wrm gear centre distance [mm] RH 1 : 7 (4 : 8) 3 : 9 3 : 9 3 : 8 3 : 8 3 : 35 3 : 35 RV RN Available rati 1 : 8 1 : 30 1 : 30 1 : 9 1 : 9 1 : 36 1 : 36 RL RH1 3.43.48.48.57 3.4.74 RV1 Rati RN1 Strke [mm] fr 1 input shaft revlutin 0.86 0.8 0.8 0.83 0.97 0.78 0.89 RL1 RH1 0.8 0.3 0.1 0.1 0.0 0.18 0.18 RV1 Rati RN1 Starting efficiency 0.18 0.15 0.14 0.13 0.13 0.11 0.11 RL1 RH1 0.48 0.43 0.4 0.4 0.43 0.40 0.41 RV1 Rati RN1 0.36 0.33 0.31 0.31 0.31 0.9 0.9 RL1 RH1 57 51 650 790 1 407 1 685 405 RV1 Rati RN1 06 57 30 399 711 866 1 37 RL1 RH1 Running efficiency at 1500 rpm ( 1 ) Starting trque n input shaft at max. lad [] 3 5.5 11 11 1 3 30 36 RV1 Rati RN1 4.4 9 9 17 0 6 33 RL1 Max. permissible perating pwer ( ) [] 80 950 3 680 4 00 7 500 11 100 15 900 Reactive trque n acme screw (nut) required at max. lad [] casting in cast irn EN-GJL-50 (UNI EN 1561) casting in steel Fe G 60 (UNI 4010) Gear bx material 75 10 10 60 60 800 800 Mass f screw jack withut acme screw [kg] 3.4 4.4 5.5 5.5 7.9 10.9 14. Mass fr every 100 mm f acme screw [kg] ( 1 ) - efficiency figures at different input speed n page 67 ( ) - THERMAL limit, referred t wrk with max. duty cycle 30 % ver 10 min time perid (0 % ver 1 hur time perid) at 5 C envirnment temperature 63

Screw jacks SJ Series - -starts acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 30 % ver 10 min time perid r 0 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. SJ 5 5 kn 3 kn 1 kn RH RV RN RL RATIO RATIO RATIO RH RV RN RL RH RV RN RL RH RV RN RL 1 500 50 3 16 8 3.4 0.53.3 0.35 1.3 0.19 0.8 0.1.0 0.3 1.4 0.1 0.8 0.1 0.5 0.07 0.7 0.11 0.5 0.07 0.3 0.04 0. 0.0 1 000 33.3 1.3 10.7 5.3 3.5 0.37.4 0.5 1.4 0.14 0.9 0.09.1 0. 1.4 0.15 0.8 0.09 0.5 0.05 0.7 0.07 0.5 0.05 0.3 0.03 0. 0.0 750 5 16 8 4 3.7 0.9.5 0.19 1.4 0.11 0.9 0.07. 0.17 1.5 0.1 0.9 0.07 0.5 0.04 0.8 0.06 0.5 0.04 0.3 0.0 0. 0.01 500 16.7 10.7 5.3.7 3.9 0.0.6 0.13 1.5 0.08 0.9 0.05.3 0.1 1.5 0.08 0.9 0.05 0.6 0.03 0.8 0.04 0.5 0.03 0.3 0.0 0. 0.01 300 10 6.4 3. 1.6 4.0 0.13.7 0.08 1.6 0.05 1.0 0.03.4 0.08 1.6 0.05 0.9 0.03 0.6 0.0 0.8 0.03 0.6 0.0 0.3 0.01 0. 0.01 100 3.3.1 1.1 0.5 4.5 0.05.9 0.03 1.7 0.0 1.1 0.01.7 0.03 1.7 0.0 1.0 0.01 0.7 0.01 0.9 0.01 0.6 0.01 0.4 0.01 0.3 0.01 50 1.7 1.1 0.5 0.3 4.6 0.0 3.0 0.0 1.8 0.01 1. 0.01.8 0.01 1.8 0.01 1.1 0.01 0.7 0.01 0.9 0.01 0.6 0.01 0.4 0.01 0.3 0.01 3 SJ 10 10 kn 8 kn 6 kn kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 1 500 6.5 15.6 10.4 8.1 1.6.6 0.41.0 0.31 6.4 1.01.1 0.33 1.6 0.5 4.8 0.76 1.6 0.4 1. 0.19 1.6 0.5 0.5 0.08 0.4 0.06 1 000 41.7 10.4 6.9 8.4 0.88.7 0.8.1 0. 6.8 0.71. 0.3 1.7 0.18 5.1 0.53 1.6 0.17 1.3 0.13 1.7 0.18 0.6 0.06 0.4 0.04 750 31.3 7.8 5. 8.7 0.68.8 0..3 0.17 7.0 0.55.3 0.18 1.8 0.14 5. 0.41 1.7 0.13 1.4 0.10 1.8 0.14 0.6 0.04 0.5 0.03 500 0.8 5. 3.5 9. 0.48.9 0.15.4 0.1 7.4 0.39.3 0.1 1.9 0.10 5.5 0.9 1.8 0.09 1.4 0.07 1.9 0.10 0.6 0.03 0.5 0.0 300 1.5 3.1.1 9.8 0.31 3.1 0.10.5 0.08 7.8 0.4.5 0.08.0 0.06 5.9 0.18 1.9 0.06 1.5 0.05.0 0.06 0.6 0.0 0.5 0.0 100 4. 1.0 0.7 10.7 0.11 3.5 0.04 3.0 0.03 8.6 0.09.8 0.03.4 0.0 6.4 0.07.1 0.0 1.8 0.0. 0.0 0.7 0.01 0.6 0.01 50.1 0.5 0.3 10.9 0.06 3.8 0.0 3.1 0.0 8.7 0.05 3.0 0.0.5 0.01 6.6 0.03.3 0.01 1.9 0.01. 0.01 0.8 0.01 0.6 0.01 SJ 5 5 kn 0 kn 15 kn 10 kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 1 500 50 16.7 1.5 17.0.66 7.0 1.10 5.8 0.91 13.6.13 5.6 0.88 4.7 0.73 10. 1.60 4. 0.66 3.5 0.55 6.8 1.07.8 0.44.3 0.36 1 000 33.3 11.1 8.3 17.7 1.85 7.4 0.78 6.1 0.64 14. 1.48 6.0 0.6 4.9 0.51 10.6 1.11 4.5 0.47 3.7 0.38 7.1 0.74 3.0 0.31.5 0.5 750 5 8.3 6.3 18. 1.43 7.7 0.60 6.3 0.49 14.6 1.14 6.1 0.48 5.1 0.39 10.9 0.86 4.6 0.36 3.8 0.30 7.3 0.57 3.1 0.4.5 0.0 500 16.7 5.6 4. 19.5 1.0 8.1 0.4 6.8 0.35 15.6 0.8 6.5 0.34 5.4 0.8 11.7 0.61 4.9 0.5 4.1 0.1 7.8 0.41 3. 0.17.7 0.14 300 10 3.3.5 0.5 0.64 8.6 0.7 7.3 0.3 16.4 0.5 6.9 0. 5.8 0.18 1.3 0.39 5. 0.16 4.4 0.14 8. 0.6 3.4 0.11.9 0.09 100 3.3 1.1 0.8.6 0.4 9.8 0.10 8.5 0.09 18.6 0.19 7.8 0.08 6.8 0.07 13.5 0.14 5.9 0.06 5.1 0.05 9.1 0.09 3.9 0.04 3.4 0.04 50 1.7 0.6 0.4 3.6 0.1 10.4 0.05 9.1 0.05 18.9 0.10 8.3 0.04 7.3 0.04 14. 0.07 6. 0.03 5.5 0.03 9.5 0.05 4. 0.0 3.7 0.0 64 SJ 50 50 kn 35 kn 5 kn 10 kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 1 500 50 5 1.5 34.8 5.46 0.1 3.15 1.1 1.91 4.3 3.8 14.1.1 8.50 1.33 17.4.73 10.0 1.58 6.1 0.95 7.0 1.09 4.0 0.63.5 0.38 1 000 33.3 16.7 8.3 37.1 3.88 1.3.3 13.1 1.37 6.0.7 14.9 1.56 9.16 0.96 18.5 1.94 10.6 1.11 6.6 0.69 7.4 0.78 4.3 0.45.6 0.7 750 5 1.5 6.3 38. 3.00.6 1.77 13.5 1.06 6.7.10 15.8 1.4 9.45 0.74 19.1 1.50 11.3 0.89 6.7 0.53 7.7 0.60 4.5 0.35.7 0.1 500 16.7 8.3 4. 40.6.13 3.5 1.3 14.4 0.75 8.4 1.49 16.4 0.86 10.1 0.53 0.3 1.06 11.7 0.61 7. 0.38 8.1 0.43 4.7 0.5.9 0.15 300 10 5.5 43.3 1.36 4.8 0.78 15.8 0.49 30.3 0.95 17.3 0.54 11.0 0.35 1.6 0.68 1.4 0.39 7.9 0.5 8.7 0.7 5.0 0.16 3. 0.10 100 3.3 1.7 0.8 46.7 0.49 8.0 0.9 18. 0.19 3.7 0.34 19.6 0.0 1.7 0.13 3.3 0.4 14.0 0.15 9.1 0.10 9.4 0.10 5.6 0.06 3.7 0.04 50 1.7 0.8 0.4 50.3 0.6 30.4 0.16 0.5 0.11 35. 0.18 1.3 0.11 14.3 0.08 5.1 0.13 15. 0.08 10. 0.05 10.1 0.05 6.1 0.03 4.1 0.0

Screw jacks SJ Series - -starts acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 30 % ver 10 min time perid r 0 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. SJ 100 100 kn 80 kn 60 kn 40 kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 1 500 64.3 3.1 16.1 5.0 3.9 53.7 8.44 30.6 4.81 18.7.94 35.8 5.6 0.4 3.0 1.5 1.96 1 000 4.9 1.4 10.7 54.8 5.74 34. 3.58 76. 7.98 43.9 4.59 7.4.87 57.1 5.98 3.9 3.45 0.5.15 38.1 3.99 1.9.30 13.7 1.43 750 3.1 16.1 8.0 97.5 7.66 58.4 5.48 35.7.80 78.0 6.13 46.7 3.67 8.6.4 58.5 4.60 35.0.75 1.4 1.68 39.0 3.06 3.4 1.83 14.3 1.1 500 1.4 10.7 5.4 103 5.39 61.3 3.1 37.4 1.96 8.3 4.31 49.1.57 30.0 1.57 61.7 3.3 36.8 1.93.5 1.18 41..15 4.5 1.8 15.0 0.78 300 1.9 6.4 3. 113 3.55 64.8.04 41. 1.9 90.5.84 51.8 1.63 3.9 1.03 67.9.13 38.9 1. 4.7 0.78 45.3 1.4 5.9 0.81 16.5 0.5 100 4.3.1 1.1 14 1.9 74.1 0.78 47.4 0.50 98.8 1.03 59.3 0.6 37.9 0.40 74.1 0.78 44.5 0.47 8.4 0.30 49.4 0.5 9.6 0.31 19.0 0.0 50.1 1.1 0.5 13 0.69 78.8 0.41 5.4 0.7 106 0.55 63.0 0.33 41.9 0. 79. 0.41 47.3 0.5 31.4 0.16 5.8 0.8 31.5 0.16 1.0 0.11 SJ 150 150 kn 10 kn 80 kn 50 kn RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 1 500 75 5 18.8 49.7 7.81 48.9 7.68 39.8 6.5 3.6 5.1 6.5 4.16 41.6 7.63 0.4 3.0 16.6.60 1 000 50 16.7 1.5 66.9 7.00 54.1 5.67 53.5 5.60 43.3 4.54 8.3 8.6 35.7 3.73 8.9 3.0 51.5 5.39.3.33 18.1 1.89 750 37.5 1.5 9.4 69.9 5.49 55. 4.33 17 9.98 55.9 4.39 44. 3.47 848 6.66 37.3.93 9.4.31 53.0 4.16 3.3 1.83 18.4 1.44 500 5 8.3 6.3 168 8.80 7.4 3.79 58.4 3.06 134 7.04 57.9 3.03 46.7.45 89.6 4.69 38.6.0 31.1 1.63 56.0.93 4.1 1.6 19.5 1.0 300 15 5 3.8 18 5.70 78..46 65.1.05 145 4.56 6.6 1.97 5.1 1.64 96.8 3.04 41.7 1.31 34.7 1.09 60.5 1.90 6.1 0.8 1.7 0.68 100 5 1.7 1.3 196.06 89.3 0.93 75.0 0.79 157 1.64 71.4 0.75 60.0 0.63 105 1.10 47.6 0.50 40.0 0.4 65.4 0.69 9.7 0.31 5.0 0.6 50.5 0.8 0.6 08 1.09 99.1 0.5 83. 0.44 167 0.87 79.3 0.4 66.7 0.35 111 0.58 5.9 0.8 44.4 0.3 69.4 0.36 33.0 0.17 7.8 0.15 SJ 00 00 kn 150 kn 100 kn 50 kn RV RL RV RL RV RL RV RL RV RL 1 500 85.7 1.4 56. 8.83 37.5 5.88 56.5 8.87 18.7.94 1 000 57.1 14.3 83.3 8.73 6.5 6.55 119 1.5 41.7 4.36 59.6 6.4 0.8.18 750 4.9 10.7 88.7 6.97 66.5 5.3 15 9.80 44.4 3.48 6.4 4.90. 1.74 500 8.6 7.1 63 13.7 9.9 4.87 198 10.3 69.7 3.65 13 6.89 46.5.43 65.8 3.45 3. 1. 300 17.1 4.3 81 8.84 103 3.4 11 6.63 77.4.43 141 4.4 51.6 1.6 70.3.1 5.8 0.81 100 5.7 1.4 313 3.8 117 1. 35.46 87.5 0.9 157 1.64 58.3 0.61 78.3 0.8 9. 0.31 50.9 0.7 340 1.78 131 0.69 55 1.33 98.1 0.51 170 0.89 65.4 0.34 84.9 0.44 3.7 0.17 3 SJ 50 50 kn 00 kn 150 kn 100 kn RV RL RV RL RV RL RV RL RV RL 1 500 85.7 1.4 59.4 9.33 39.58 6. 1 000 57.1 14.3 86.9 9.10 65. 6.8 15 13.1 43.4 4.55 750 4.9 10.7 117 9.1 93.8 7.37 70.4 5.53 19 10. 46.9 3.68 500 8.6 7.1 14 6.51 100 5.1 05 10.7 74.7 3.91 137 7.15 49.8.61 300 17.1 4.3 364 11.4 137 4.9 91 9.15 109 3.44 18 6.86 8.0.58 146 4.57 54.7 1.7 100 5.7 1.4 419 4.39 156 1.64 335 3.51 15 1.31 5.63 93.7 0.98 168 1.76 6.5 0.65 50.9 0.7 449.35 177 0.9 359 1.88 141 0.74 69 1.41 106 0.55 179 0.94 70.7 0.37 65

Screw jacks SJ Series - -starts acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 30 % ver 10 min time perid r 0 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. SJ 300 300 kn 50 kn 00 kn 100 kn RV RL RV RL RV RL RV RL RV RL 1 500 6.1 0 117 18.4 97.9 15.4 78.3 1.3 9.5 14.5 39.1 6.15 1 000 41.4 13.3 19 13.5 46 5.7 108 11.3 197 0.6 86. 9.03 98.3 10.3 43.1 4.51 750 31.0 10 308 4. 139 10.9 57 0. 115 9.07 06 16. 9.4 7.5 103 8.08 46. 3.63 500 0.7 6.7 39 17. 148 7.77 74 14.4 14 6.48 19 11.5 99.0 5.18 110 5.75 49.5.59 300 1.4 4 359 11.3 158 4.95 99 9.39 131 4.13 39 6.51 105 3.30 10 3.76 5.5 1.65 100 4.1 1.3 40 4.1 190 1.99 335 3.51 158 1.65 68.80 16 1.3 138 1.40 63. 0.66 50.1 0.7 439.30 1 1.11 366 1.9 177 0.9 93 1.53 141 0.74 146 0.77 70.6 0.37 3 SJ 350 350 kn 300 kn 00 kn 100 kn RV RL RV RL RV RL RV RL RV RL 1 500 6.1 0 13 19.3 8.1 1.9 93.9 14.7 41.0 6.45 1 000 41.4 13.3 157 16.4 134 14.1 05 1.5 89.5 9.37 103 10.7 44.8 4.69 750 31.0 10 168 13. 30 5.1 144 11.34 13 16.7 96. 7.56 107 8.37 48.1 3.78 500 0.7 6.7 399 0.9 183 9.57 34 17.9 157 8.0 8 1.0 104 5.47 114 5.98 5..73 300 1.4 4 441 13.9 194 6.11 378 11.9 167 5.4 5 7.9 111 3.49 16 3.96 55.6 1.75 100 4.1 1.3 499 5.3 35.46 48 4.48 01.11 85.9 134 1.41 143 1.49 67.1 0.70 50.1 0.7 540.8 60 1.36 46.4 3 1.17 308 1.61 148 0.78 154 0.81 74.4 0.39 SJ 400 400 kn 300 kn 00 kn 100 kn RV RL RV RL RV RL RV RL RV RL 1 500 64.3 0.7 168 6.4 91 45.7 16 19.8 194 30.4 83.9 13. 96. 15. 4.0 6.59 1 000 4.9 13.8 418 43.8 185 19.3 313 3.8 139 14.5 09 1.9 9.3 9.67 104 10.9 46. 4.83 750 3.1 10.3 439 34.5 195 15.3 39 5.9 146 11.5 19 17. 97.4 7.65 110 8.6 48.7 3.83 500 1.4 6.9 464 4.3 14 11. 348 18. 161 8.41 3 1.1 108 5.61 116 6.07 53.6.80 300 1.9 4.1 516 16. 9 7.0 387 1. 17 5.40 58 8.11 115 3.60 19 4.05 57.3 1.80 100 4.3 1.4 589 6.17 76.89 44 4.63 07.17 95 3.08 138 1.45 14 1.54 69.0 0.7 50.1 0.7 646 3.38 313 1.64 485.54 34 1.3 33 1.69 156 0.8 16 0.85 78. 0.41 66 SJ 600 600 kn 500 kn 400 kn 00 kn RV RL RV RL RV RL RV RL RV RL 1 500 75 4.1 94 46.1 45 38.4 196 30.8 1 34.7 97.9 15.4 1 000 50 16.1 317 33. 64 7.7 48 50.5 11.1 41 5.3 106 11.1 750 37.5 1.1 34 6.8 640 50.3 85.4 51 40. 8 17.9 56 0.1 114 8.94 500 5 8.0 816 4.7 377 19.7 680 35.6 314 16.4 544 1.5 51 13.1 7 14.3 16 6.57 300 15 4.8 886 7.9 405 1.7 739 3. 337 10.6 591 18.6 70 8.48 95 9.8 135 4.4 100 5 1.6 1 041 10.9 498 5.1 867 9.08 415 4.35 694 7.7 33 3.48 347 3.63 166 1.74 50.5 0.8 1 18 5.91 547.86 940 4.9 456.39 75 3.94 365 1.91 376 1.97 18 0.95

Screw jacks SJ Series - -starts acme screw Fllwing tables shw the screw jack and relative TORQUE [] and POWER [] n input shaft, with reference t the INPUT SPEED, the RATIO (RV, RN, RL) and the [kn] applied n the screw jack. Intermediate values fr linear speed v, trque and pwer at different input speed can be calculated by linear interplatin f the figures stated in the table. The figures in the tables refer t wrk with max. duty cycle f 30 % ver 10 min time perid r 0 % ver 1 hur time perid at 5 C envirnment temperature. ATTENTION! The figures in the red shaded area indicate peratinal restrictins due t thermal limits. When the selectin is made within such area, the duty cycle must be reduced r the greater size screw jack must be selected, in rder t allw effective heat dissipatin. Fr a better evaluatin, please cntact SERVOMECH Engineering Dpt. SJ 800 800 kn 600 kn 400 kn 00 kn RV RL RV RL RV RL RV RL RV RL 1 500 60 19.4 343 53.8 57 40.4 385 60.5 171 6.9 19 30. 85.6 13.5 1 000 40 13.0 366 38.3 631 66.1 74 8.7 41 44.0 183 19.1 10. 91.4 9.57 750 30 9.7 883 69.4 39 30.8 663 5.0 94 3.1 44 34.7 196 15.4 1 17.3 98.1 7.70 500 0 6.5 941 49.3 437.9 705 36.9 38 17. 470 4.6 19 11.4 35 1.3 109 5.7 300 1 3.9 1 054 33.1 474 14.9 790 4.8 355 11. 57 16.6 37 7.44 63 8.8 118 3.7 100 4 1.3 1 1 1.8 587 6.15 915 9.59 440 4.61 611 6.39 94 3.07 305 3.0 147 1.54 50 0.6 1 35 6.94 645 3.38 994 5.0 483.53 66 3.47 3 1.69 331 1.73 161 0.84 SJ 1000 1000 kn 800 kn 600 kn 400 kn RV RL RV RL RV RL RV RL RV RL 1 500 68.6. 481 75.6 385 60.4 89 45.3 431 67.7 19 30. 1 000 45.7 14.8 519 54.3 415 43.5 703 73.6 311 3.6 468 49.1 07 1.7 750 34.3 11.1 556 43.7 983 77. 445 35.0 737 57.9 334 6. 491 38.6 3 17.5 500.9 7.4 1 34 69.3 61 3.0 1 059 55.4 490 5.6 794 41.6 367 19. 59 7.7 45 1.8 300 13.7 4.4 1 471 46. 676 1.3 1 176 37.0 541 17.0 88 7.7 406 1.8 588 18.5 71 8.50 100 4.6 1.5 1 745 18.3 834 8.73 1 396 14.6 667 6.99 1 047 11.0 500 5.4 698 7.31 334 3.49 50.3 0.7 1 908 9.99 96 4.85 1 56 7.99 741 3.88 1 145 5.99 556.91 763 4.00 370 1.94 Ttal efficiency f screw jack with -starts acme screw h SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 SJ 150 RATIO RATIO RH RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL RV RN RL 1 500 0.48 0.45 0.41 0.33 0.50 0.38 0.34 0.47 0.38 0.34 0.46 0.40 0.33 0.46 0.40 0.33 0.49 0.39 0.36 1 000 0.45 0.43 0.38 0.31 0.47 0.37 0.3 0.45 0.36 0.33 0.43 0.37 0.30 0.43 0.37 0.30 0.46 0.36 0.33 750 0.44 0.41 0.37 0.9 0.46 0.35 0.30 0.44 0.35 0.3 0.4 0.35 0.9 0.4 0.35 0.9 0.45 0.34 0.3 500 0.41 0.40 0.36 0.8 0.43 0.34 0.8 0.41 0.33 0.30 0.39 0.34 0.8 0.40 0.33 0.7 0.43 0.33 0.31 300 0.40 0.39 0.33 0.7 0.41 0.3 0.7 0.39 0.31 0.7 0.37 0.3 0.5 0.36 0.3 0.5 0.39 0.31 0.7 100 0.36 0.36 0.30 0.3 0.37 0.8 0. 0.35 0.7 0.4 0.34 0.8 0. 0.33 0.8 0. 0.36 0.7 0.4 50 0.35 0.34 0.9 0. 0.37 0.7 0.1 0.34 0.6 0. 0.3 0.6 0.19 0.31 0.6 0.0 0.34 0.4 0.1 AT START 0.3 0.3 0.8 0.1 0.33 0.6 0.0 0.31 0.3 0.0 0.9 0.4 0.18 0.8 0.3 0.17 0.30 0.1 0.19 h SJ 00 SJ 50 SJ 300 SJ 350 SJ 400 SJ 600 SJ 800 SJ 1000 RV RL RV RL RV RL RV RL RV RL RV RL RV RL RV RL 1 500 0.48 0.36 0.47 0.34 0.43 0.33 0.4 0.31 0.4 0.31 0.43 0.31 0.40 0.9 0.41 0.9 1 000 0.46 0.33 0.44 0.31 0.40 0.30 0.39 0.8 0.39 0.9 0.40 0.9 0.36 0.7 0.37 0.7 750 0.44 0.31 0.4 0.9 0.38 0.8 0.37 0.6 0.37 0.7 0.37 0.7 0.35 0.5 0.36 0.5 500 0.41 0.9 0.40 0.7 0.36 0.6 0.35 0.4 0.35 0.5 0.35 0.4 0.3 0.3 0.33 0.3 300 0.39 0.6 0.37 0.5 0.33 0.4 0.31 0.3 0.3 0.3 0.3 0.3 0.8 0.1 0.30 0.1 100 0.35 0.3 0.33 0. 0.30 0.0 0.8 0.19 0.8 0.19 0.8 0.19 0.5 0.17 0.5 0.17 50 0.3 0.1 0.30 0.19 0.7 0.18 0.6 0.17 0.5 0.17 0.5 0.17 0.3 0.15 0.3 0.15 AT START 0.8 0.19 0.6 0.17 0.3 0.15 0.1 0.14 0.1 0.13 0.0 0.13 0.18 0.11 0.18 0.11 3 67

Screw jacks SJ Series - verall dimensins Mdel A - TRAVELLING SCREW 3 Mdel B - TRAVELLING NUT 68

Screw jacks SJ Series - verall dimensins SIZE ACME SCREW SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 SJ 150 SJ 00 SJ 50 Tr 18 4 Tr 5 Tr 30 6 Tr 40 7 Tr 55 9 Tr 60 1 Tr 70 1 Tr 80 1 A 6 76 8 118 160 164 176 176 B 100 110 160 00 0 8 80 80 C 86 96 130 160 170 01 30 30 D1 (min.) 51 6 81 90 108 108 118 118 D (min.) 5 63 83 9 110 110 10 10 D3 (min.) 77 93 118 137 160 190 10 10 D4 (min.) 51 6 81 90 108 108 118 118 E 5 63 81 115 134 150 180 180 E1 56 80 10 130 10 150 180 180 F 60 78 106 150 175 0 30 30 F1 80 85 131 165 180 0 30 30 G 90 100 136 165 165 05 I 5 30 50 63 63 80 90 90 L 135 165 1.5 69 69 330 350 350 O M8, depth 14 M8, depth 15 M10, depth15 M1, depth 16 M0, depth. 30 M30, depth 45 M30, depth 45 M30, depth 45 O1 9 9 11 13 17 8 3 3 Q 1 18 3 3 40 40 40 40 S 37 40 50 59 74 94 75 75 U 1 9 4 63 60 75 90 90 U1 8 30 48 60 63 75 90 90 V 46 46 64 63 63 74 W 15 156 186 40 308 31 334 334 Z M6, depth 13 M5, depth 10 M5, depth 10 M6, depth 14 M6, depth 14 M6, depth 14 (4 hles at 90 ) (6 hles at 60 ) (6 hles at 60 ) (6 hles at 60 ) (6 hles at 60 ) (6 hles at 60 ) Z1 111 17 151 185 8 8 68 48 a 68 75 100 10 150 150 180 180 a1 68 75 100 10 130 150 180 190 b 45 55 75 85 110 110 130 130 b1 50 56 75 90 105 10 140 150 c 5 30 40 50 70 70 85 85 c1 30 40 50 60 75 80 100 110 d 9 14 19 4 4 8 30 30 e 1 15 0 30 40 40 50 60 f 3 1 36 35 9 5 5 f1 10 15 17 17 0 9 5 5 g 19 4 38 38 48 48 58 58 h 0 5 40 40 50 50 60 60 h 30 38.7 46 60 90 90 10 10 h1 60 75 100 10 140 180 10 10 h 30 40 50 70 80 100 10 10 i M1 1.75 M16 1.5 M0 1.5 M30 M4 3 M4 3 M56 3 M56 3 l 0 30 40 50 50 60 55 55 m 0 5 30 40 50 60 75 75 n 3 38 48 68 78 90 108 108 M4, depth 8 M6, depth 14 M8, depth 16 M8, depth 16 M8, depth 16 M8, depth 16 M10, depth 18 M10, depth 18 q 3 3 15 5 5 0 6 6 30 8 7 40 8 7 40 8 7 40 8 7 45 8 7 45 r 15 0 5 35 40 50 60 60 s 8 10 1 15 0 0 5 5 s1 1 1 15 5 0 30 35 30 t1 40 45 50 75 100 100 130 110 u, n hles 7, 4 hles 9, 4 hles 11, 4 hles 17, 4 hles 1, 4 hles 1, 4 hles 6, 6 hles 6, 6 hles u1, n hles 7, 4 hles 9, 4 hles 11, 4 hles 17, 4 hles 17, 4 hles 1, 4 hles 6, 6 hles 18, 4 hles z 14 0 5 35 40 50 60 60 J1 56 B5/B14: 57.5 63 B5/B14: 6 63/71 B5: 10 80 B5: 100 80 B5: 100 80/90 B5: 10 100/11 B5: 170 100/11 B5: 170 J1s 56 B5: 9 56 B14: 9 J 63 B5: 98 Js 63 B5: 39 63 B5: 3 63 B14: 7 71 B5: 1 71 B14: 131 71 B5: 4 71 B14: 15 63 B5: 9 71 B5: 39 80 B5: 18 80 B14: 176 90 B5: 18 90 B14: 18 80 B5: 59 80 B14: 19 90 B5: 59 90 B14: 9 80 B5: 41 80 B5: 0 80/90 B5: 18 100/11 B5: 37 100/11 B5: 37 90 B5: 00 90 B14: 00 100 B5: 0 100 B14: 0 90 B5: 41 90 B14: 11 100 B5: 66 100 B14: 1 90 B5: 00 90 B14: 00 100/11 B5: 40 100/11 B5: 0 100/11 B14: 40 100/11 B14: 0 90 B5: 0 90 B14: 100/11 B5: 43 100/11 B5: 45 100/11 B14: 100/11 B14: 13 B5: 9 13 B5: 9 13 B5: 6 13 B5: 6 3 69

Screw jacks SJ Series - verall dimensins Mdel A - TRAVELLING SCREW 3 Mdel B - TRAVELLING NUT 70

Screw jacks SJ Series - verall dimensins SIZE SJ 300 SJ 350 SJ 400 SJ 600 SJ 800 SJ 1000 ACME SCREW Tr 90 1 Tr 100 1 Tr 100 1 Tr 10 14 Tr 140 14 Tr 160 16 A 30 30 70 70 370 370 B 30 30 418 418 610 610 C 50 50 30 30 500 500 D1 (min.) 158 158 158 178 0 35 D (min.) 160 160 160 170 10 10 D3 (min.) 90 90 90 340 410 430 D4 (min.) 10 10 10 40 60 60 E 00 00 30 30 E1 00 00 30 30 360 360 F 70 70 355 355 F1 70 70 355 355 510 510 I 110 110 140 140 00 00 L 390 390 490 490 780 780 O M30, depth 45 M30, depth 45 M30, depth 45 M30, depth 45 O1 3 3 3 3 60 60 Q 50 50 50 50 60 60 S 85 85 117 117 170 170 U 100 100 135 135 U1 100 100 135 135 190 190 W 438 438 598 618 650 665 Z1 340 345 345 375 530 530 a 50 78 78 98 378 378 a1 30 30 30 80 30 30 b 180 0 0 40 300 300 b1 190 190 190 35 70 70 c 115 150 150 170 10 10 c1 150 150 150 180 10 10 d 40 40 55 55 70 70 e 10 10 10 150 150 150 e 70 85 85 100 10 140 e1 70 70 70 90 10 130 f 5 5 37 37 f1 5 5 37 37 50 50 g 68 68 68 88 110 15 g1 80 80 80 85 10 10 h 70 70 70 80 100 100 h 150 150 10 10 300 300 h1 80 80 80 350 440 460 h 160 160 160 00 80 80 i M70 6 M70 6 M70 6 M90 6 M110 6 M15 6 l 65 65 75 75 130 130 m 100 100 100 10 155 155 38 138 138 168 16 16 q M10, depth 1 8 55 M10, depth 1 8 55 M1, depth 8 16 10 60 M1, depth 8 16 10 60 M14, depth 30 0 1 110 M14, depth 30 0 1 110 r 80 80 80 100 140 140 s 40 40 40 50 60 60 s1 45 45 45 55 80 80 t1 135 135 135 160 50 50 u, n hles 9, 6 hles 9, 6 hles 9, 6 hles 3, 6 hles 5, 6 hles 5, 6 hles u1, n hles 0, 4 hles 0, 4 hles 0, 4 hles 5, 4 hles 5, 6 hles 5, 6 hles v 40 40 40 40 50 50 z 80 80 80 100 140 140 3 71

Screw jacks SJ Series - ptins Screw jack husing fixing hles On the gear husing f screw jack SJ Series there are fixing hles, which can be tapped hles (n bth husing fixing planes) r thrugh hles. Nte that psitin f threaded hles n the fixing plane differs frm the psitins f the thrugh hles. Ordering cde: FF fr threaded hles (STANDARD) Ordering cde: FP fr thrugh hles (ON REQUEST) 3 Stp nut Available fr screw jacks with travelling screw (Md. A) nly. The mechanical stp prevents the acme screw thread unscrewing clear f the screw jack husing. It is a washer pinned at the acme screw end (ppsite the attachment side) that blcks the screw translatin when reaching the relative stp. The acme screw length is defined t allw, under nrmal use, at the maximum extended psitin, 0 mm f additinal strke (safety extra-strke). If the mechanical stp reaches accidentally the relative stp, it is necessary t check the screw jacks cmpnents t verify pssible damages. Ordering cde: SN Prtective tube Available fr screw jacks with travelling screw (Md. A) nly. The prtective tube is screwed in the raised cver CA and enclses the acme screw belw the husing, prtecting it frm damages and/r envirnment pllutin such as dust, water, etc. Furthermre, it allws the fitting f ther ptins such as limit switches and/r anti-turn device. Material is aluminium r steel if anti-turn device is fitted. Ordering cde: T 7

Anti-turn device Available fr screw jacks with travelling screw (Md. A) nly. The anti-turn device is necessary when the lad t be lifted may turn, i.e. the screw guidance des nt prevent rtatin, r in case the applicatin des nt prperly allw the acme screw reactin t permit the translatin. Functining: a steel key is fitted alng the prtective tube and a keyed brnze washer is fixed at the end f the acme screw; this prevents the screw rtatin and frces the screw translatin. Up t screw jack size 50 (acme screw Tr 40 7) included, the anti-turn device has nly ne key; frm size 100 (acme screw Tr 55 9) n, it has tw keys. The brnze bush als acts as a stp nut against acme screw unthreading. Ordering cde: AR Screw jacks SJ Series - ptins Trunnin munt Available fr bth screw jacks mdels: with travelling screw (Md. A) and with travelling nut (Md. B). The trunnin munt blts n t either the tp r the bttm f the screw jack husing and allws pivting f the screw jack arund the axis defined by trunnin munt s lateral pins. On screw jack Md. A: the acme screw attachment must have a cylindrical hle with axis parallel t the trunnin munt lateral pin axis. On screw jack Md. B: the part f the machine where the brnze nut MB is fixed must have tw lateral cylindrical pins (r hles) with axis parallel t the trunnin munt lateral pin axis. 3 SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 SJ 150 SJ 00 SJ 50 SJ 300 SJ 350 A 100 110 160 00 0 76 80 80 31 31 B 86 96 130 160 170 00 30 30 4 4 &D 15 0 5 35 45 60 70 70 65 65 &D 1 0 5 30 40 50 70 90 90 85 85 H 0 5 30 40 50 100 10 10 10 10 l 15 0 30 30 35 65 75 75 65 65 S 105 115 185 15 35 305 300 300 350 350 S 1 40.5 4.5 7.5 85.5 90.5 119.5 15 15 140 140 S 64.5 7.5 11.5 19.5 144.5 185.5 175 175 10 10 mass [kg] 1.1 1.8 3.4 7.3 9 30 40 40 40 40 Ordering cde: SC (TF side) screw jacks Md. A with SC fitted n side twards screw attachment Ordering cde: SC (pp. TF side) screw jacks Md. A with SC fitted n side ppsite t screw attachment Ordering cde: SC (screw side) Ordering cde: SC (pp. screw side) screw jacks Md. B with SC fitted n side twards screw screw jacks Md. B with SC fitted n side ppsite t screw 73

Screw jacks SJ Series - ptins Bellws Available fr bth screw jacks mdels: with travelling screw (Md. A) and with travelling nut (Md. B). In applicatins with particular envirnment cnditins, bellws prtect the screw frm cntaminants. The usually supplied bellws are circular, sewn (duble seam), in NYLON with a PVC utside and inside cating. Fr special applicatin requirements, different executins r materials can be supplied n request. The bellws cause changes t the retracted and extended lengths and screw jack verall dimensins stated in the catalgue. On request, rders will be acknwledged with a screw jack drawing giving exact dimensins. Screw jacks SJ Md.A with bellws Usually, bellws are fitted between the acme screw attachment and wrm gearbx, and at the ppsite side the prtectin tube is fitted. In case the screw jack shall have a screw withut attachment, it is recmmended t rder it with a sketch f the required bellws attachment dimensins. STROKE 3 Fllwing table shws the bellws available n stck: executin: circular, sewn; material: NYLON with a PVC utside and inside cating; strke: 300 mm, 600 mm r 1 000 mm; n request, bellws fr different strke can be supplied; dimensins f tw attachments suitable fr fitting t the screw jack husing and t the flange end P. 74 SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 D 65 80 100 10 10 L min (fr C300) 80 40 50 L min (fr C600) 180 90 90 90 90 L min (fr C1000) 144 144 144 c1 3 40 47 61 91 l1 10 10 10 0 0 c 6 31 41 51 71 l 10 10 10 0 0 Ordering cde: B

Screw jacks SJ Series - ptins Screw jacks SJ Md.B with bellws Bellws are nrmally fitted between the screw jack husing and the nut and als between the nut and the acme screw end. Sme applicatins may require bellws in nly ne f these tw psitin. The dimensin f the bellws attachment between screw jack husing and brnze nut is determined by the screw jack s dimensins while the bellws attachment between brnze nut and acme screw end depends n the applicatin structure the bellws shall fit. L acme thread STROKE L acme thread STROKE X X L acme thread STROKE STROKE 3 Lc Lc X X Lc Lc Lc X L acme thread STROKE Y Y Y Y L acme thread STROKE Y FLANGE COLLAR - bellws attachment dimensins t be defined 75

Screw jacks SJ Series - ptins Safety nut Available fr bth screw jacks mdels: with travelling screw (Md. A) and with travelling nut (Md. B). The safety nut is a back-up feature t prevent the lad drpping in an uncntrlled manner in the event f wrking nut thread breaking due t verlad r achieving f critical wear level (wear level that causes the breaking f the remaining thread sectin with nrmal wrking lad nly). The safety nut is an extensin t the standard nut (wrmwheel inside Md.A screw jacks r external travelling nut f Md.B screw jacks) and changes the screw jack verall dimensins. The safety nut wrks with ne particular lad directin nly. Its psitin as regards the standard nut is cnditined by the lad directin. Fllwing drawings shw a screw jack with safety nut in case f acme screw subjected t push lad. In case f pull lad, the psitin f the nut wuld be n the ppsite side f the screw jack husing (Md. A) r f the external travelling nut (Md. B). By new screw jacks, the distance b between standard nut and safety nut is equal t the half f the prfile pitch (P) f the acme thread. 3 Screw jacks SJ Md.A with safety nut 76 SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 SJ 150 SJ 00 SJ 50 SJ 300 SJ 350 SJ 400 SJ 600 SJ 800 SJ 1000 a 33 40 50 70 70 95 95 135 135 135 160 50 50 b.5 3 3.5 4.5 6 6 6 6 6 6 7 7 8 c 14.5 30.5 39.5 53.5 61 88 88 114 114 114 140 15 16 &d 30 50 55 70 80 100 100 130 140 150 160 40 40 Ordering cde: MSA push screw jacks Md.A with safety nut fr push lad Ordering cde: MSA pull screw jacks Md.A with safety nut fr pull lad Screw jacks SJ Md.B with safety nut SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 SJ 150 SJ 00 SJ 50 SJ 300 SJ 350 SJ 400 SJ 600 SJ 800 SJ 1000 a 8 33 35 50 70 70 95 95 135 135 135 160 50 50 b.5 3 3.5 4.5 6 6 6 6 6 6 7 7 8 &d 30 40 50 60 75 80 100 100 150 150 150 180 10 10 Ordering cde: SBC push Ordering cde: SBC pull screw jacks Md.B with safety nut fr push lad screw jacks Md.B with safety nut fr pull lad

Screw jacks SJ Series - ptins Acme thread wear level check Available fr bth screw jacks mdels: with travelling screw (Md. A) and with travelling nut (Md. B). Due t wrking cnditins (lad, speed, temperature, lubricatin), the thread f the wrking nut wears ut. Sme applicatins require the pssibility t keep the current wear level under cntrl t prevent reaching the critical wear level and cnsequent thread breaking by replacing the nut early. P P/4 Usually, a value equal t 1/4 f the prfile pitch (P) f the acme thread is cnsidered as max. wear level admitted. P With thread wear, the distance b between wrking nut and safety nut (see drawings n previus page) reduces t the wrking nut. By measuring this change, it is pssible t get the current wear level f the thread. P/4 Fllwing drawings shw the pssible slutins: - check f dimensin c 1, c, c 3 r c 4 fr screw jacks with travelling screw (Md. A) r f distance b fr screw jacks with travelling nut (Md. B) - see drawings n previus page and belw - cmparing the current value with the initial ne (with new screw jack), - appliance f an electric switch (see drawings belw) which is activated when the pre-established wear level is reached giving an electric signal. 3 Thread wear cntrl n screw jacks SJ Series Md.A Thread wear cntrl n screw jacks SJ Series Md.B 77

Screw jacks SJ Series - ptins Wrmwheel rtatin detectr Available fr screw jacks with travelling screw (Md. A) nly. Sme applicatins require the pssibility t verify if the wrmwheel rtates while the wrm shaft is mving in rder t get infrmatin abut the gd cnditin and functining f the wrmwheel tthing. Usually, this device is required fr applicatins where a safety nut is already present. A crwn f empty and full spaces (created by machining the safety nut end, see picture n the right), while rtating, activates a crrespnding prximity switch. As utput f such prximity switch, activated and deactivated by the alternatin f empty and full spaces, a train f impulses is generated and it cnfirms the rtatin f the wrmwheel. On the cntrary, the cnstant utput signal f the prximity means the stp f the wrmwheel. 3 Magnetic strke end switches Available fr screw jacks with travelling screw (Md. A) and fr size 5, 10 5. Nt cmpatible with antiturn device AR. Functining: the magnetic strke end switches are sensrs with reed cntact and are fixed with a clamp n the prtective tube T, made in aluminium r ther nn-magnetic metal. They are activated by the magnetic field generated by a magnetic ring fitted n the acme screw end. In case the screw jack is nt stpped after the sensr activatin, withut magnetic field the sensr restres the riginal state. In case the limit switches are used t stp the screw jack, we recmmend t prvide fr an electric cnnectin in rder t latch the signal and t prevent that the screw jack mves again in the same directin. Screw jacks with magnetic limit switches are supplied with tw sensrs fr the acme screw extreme psitins. On request, extra switches fr intermediate distances can be supplied. The psitin f the sensrs alng the tube is adjustable. Technical details: nrmally nrmally Cntact: CLOSED (NC) OPEN (NO) Vltage range: (3... 130) Vdc / (3... 130) Vac Switching capacity: 0 W / 0 VA Max. switching current at 5 C: 300 ma (resistive lad) Max. inductive lad: 3 W (simple cil) Wires 0.5 mm Cable length m Ordering cde: FCM-NC Ordering cde: FCM-NO fr screw jacks with nrmally clsed magnetic switches FCM fr screw jacks with nrmally pen magnetic switches FCM 78

Screw jacks SJ Series - ptins Inductive prximity strke end switches Available fr screw jacks with travelling screw (Md.A) nly. Functining: prximity limit switches are PNP inductive sensrs with nrmally CLOSED cntact (NC) fitted n the prtective tube and activated by the metallic ring fixed n the acme screw end. In case the screw jack is nt stpped after the sensr activatin, when the metallic ring mves away the sensr restres the riginal state (becmes deactivated). In case the limit switches are used t stp the screw jack, we recmmend t prvide fr an electric cnnectin in rder t latch the signal and t prevent that the screw jack mves again in the same directin. Screw jacks with prximity limit switches are supplied with tw sensrs fr the acme screw extreme psitins. Extra switches fr intermediate distances available n request. On standard executin, the sensrs psitin alng the tube is nt adjustable and is nt angularly fixed. On request, it can be supplied with angular psitin at custmer s indicatin. standard FCP adjustable FCP Executin with axial adjustment f the sensrs psitin available n request. Technical details: Type inductive, PNP Cntact: nrmally CLOSED (NC) Nminal vltage: (10... 30) Vdc Max. utput current: 00 ma Vltage drp (activated sensr): < 1.8 V Wires 3 0. mm Cable length m Ordering cde: standard FCP (nt adjustable) adjustable FCP Material: stainless steel Fr applicatins in particular envirnment cnditins r in fd industry, the screw jacks SJ Series can be supplied with stainless steel acme screw and/r screw attachment n request. Available steels: AISI 303, AISI 304, AISI 316. Ordering cde: TR inx stainless steel acme screw fr screw jacks Md. A r Md. B Ordering cde: P inx stainless steel flange end P, fr screw jacks Md. A Ordering cde: TF inx stainless steel rd end TF, fr screw jacks Md. A IEC mtr cnnectin SJ 5 SJ 10 SJ 5 SJ 50 SJ 100 SJ 150 SJ 00 SJ 50 56 B5 F B14 F 63 B5 B F F B14 F 71 B5 B F F F B14 B F 80 B5 B F F F B14 B B5 B B B F 90 B14 B B B 100-11 B5 B B B F F B14 B B B B B 13 B5 B B F - plug-in IEC flange and hllw shaft B - bell-husing + cupling IEC Flange r bell-husing at drawing fr hydraulic mtrs r servmtrs cnnectin available n request. 3 79

Screw jacks SJ Series - cding descriptin Screw jacks SJ Series with travelling screw (Md.A) SJ 50 Md.A RL1 Vers. 3 (80 B5) U-RH FF C300 1 3 4 5 6 7 8 TF B MSA / SC T AR FCP 9... 10... 11 AC 3-phase brake mtr 0.75 4 ples 30/400 V 50 Hz IP 55 Isl. F 1 1 SJ (screw jack SJ Series) Screw jack size 5... 1000 page 56-57, 6-63 3 Md.A (Mdel: travelling screw) 4 Rati and number f acme screw starts page 56-57, 6-63 5 Input versins Vers.1, Vers., Vers.3, Vers.4, Vers.5, Vers.6 page 7 6 Screw jack munting and input shaft psitin U-RH, U-LH, D-RH, D-LH, H-RH, H-LH page 7 7 Screw jack husing fixing hles FF, FP page 7 8 Screw jack strke length (ex.: C300 = 300 mm strke) 3 9 Optins NF, P, TF, N B SC SN T AR FCM-NC FCP-NC Screw end Bellws Trunnin munt Stp nut Prtective tube Anti-turn device Magnetic strke end switches (nrmally clsed) Prximity strke end switches (PNP, nrmally clsed) 10 Other ptins example: encder (with all relevant data) 11 Further specificatins example: stainless steel acme screw AISI 303 example: lw temperature lubricant 1 Mtr specificatins page 68-71 page 74 page 73 page 7 page 7 page 73 page 78 page 79 13 Cding frm page 81 14 Applicatin sketch 80

Screw jacks SJ Series - cding descriptin Screw jacks SJ Series with travelling screw (Md.A) UPWARD munting DOWNWARD munting P TF FCP NF FCM AR B T SN SC SC Versin FF FP FP Versin FF SC SC SN T B AR FCM NF FCP TF P 3 PUSH PULL MSA MSA PULL PUSH UPWARD munting DOWNWARD munting 81

Screw jacks SJ Series - cding descriptin Screw jacks SJ Series with travelling nut (Md.B) SJ 50 Md.B RL1 Vers. 3 (80 B5) U-RH FF C300 1 3 4 5 6 7 8 N B MB+SBC B1 9... 10... 11 AC 3-phase brake mtr 0.75 4 ples 30/400 V 50 Hz IP 55 Isl. F 1 1 SJ (screw jack SJ Series) Screw jack size 5... 1000 page 56-57, 6-63 3 Md.B (Mdel: travelling nut) 4 Rati and number f acme screw starts page 56-57, 6-63 5 Input versins Vers.1, Vers., Vers.3, Vers.4, Vers.5, Vers.6 page 7 6 Screw jack munting and input shaft psitin U-RH, U-LH, D-RH, D-LH, H-RH, H-LH page 7 7 Screw jack husing fixing hles FF, FP page 7 8 Screw jack strke length (ex.: C300 = 300 mm strke) 3 9 Optins N B 1, B MB SBC RMG Screw end Bellws Wrking nut Safety nut Adjustable backlash 10 Other ptins example: encder (with all relevant data) 11 Further specificatins example: stainless steel acme screw AISI 303 example: lw temperature lubricant 1 Mtr specificatins page 68-71 page 75 page 68-71 page 76 page 46 13 Cding frm page 83 14 Applicatin sketch 8

Screw jacks SJ Series - cding descriptin Screw jacks SJ Series with travelling nut (Md.B) UPWARD munting DOWNWARD munting FF Versin FP B1 RMG MB+SBC B MB MB+SBC N MB MB+SBC MB MB+SBC MB PULL PUSH PUSH MB PULL 3 MB+SBC MB MB+SBC MB N MB+SBC MB B MB+SBC RMG B1 FF Versin FP UPWARD munting DOWNWARD munting 83

Screw jacks SJ Series Screw jacks SJ Series with travelling screw (Md. A) - spare parts 13.1 11 7 5 19 0 1 4 1 0 1 Gear bx Wrm shaft Vers. 3 Wrm shaft Vers.4 4 Wrmwheel Md.A 5 Threaded cver 6 Guide bush 7 Travelling acme screw 8 Prtective tube 9.1 Flange fr IEC mtr 9. Bell-husing fr IEC mtr 10.1 Input shaft bearing 10. Input shaft bearing 10.3 Input shaft bearing 11 Shim washer 1 Circlip 13.1 Radial lubricant seal 13. Radial lubricant seal 13.3 Radial lubricant seal 14 Circlip 15 Flange - bell-husing fixing screw 16 Cupling 17 Semi-cupling lcking grub 18 Key 19 O-ring lubricant seal 0 Radial lubricant seal 1 Wrmwheel bearing Threaded cver lcking grub 3 Grease nipple 4 Cver 1 18 3 10.1, 10.3 18 3 18 6 8 1 3 10. 18 9.1 10.1 11 1 13.1 14 10.1 13. 11 1 13.3 9. 14 15 17 16 4 Fr spare parts rders we recmmend yu t refer t the relative prduct serial number, marked n the prduct label fixed n the screw jack husing. 84

Screw jacks SJ Series Screw jacks SJ Series with travelling nut (Md. B) - spare parts 13.1 11 8 7.1 0 1 4.1 1 3 0 4 5 6 7 6 7. 4. 6 1 Gear bx Wrm shaft Vers. 3 Wrm shaft Vers.4 4.1 Wrmwheel Md.B 4. Wrmwheel Md.B with elastic pins 5 Threaded cver 6 Guide bushes 7.1 Rtating acme screw - metric thread fixing 7. Rtating acme screw - fixing 8 Brnze nut MB 9.1 Flange fr IEC mtr 9. Bell-husing fr IEC mtr 10.1 Input shaft bearing 10. Input shaft bearing 10.3 Input shaft bearing 11 Shim washer 1 Circlip 13.1 Radial lubricant seal 13. Radial lubricant seal 13.3 Radial lubricant seal 14 Circlip 15 Flange - bell-husing fixing screw 16 Cupling 17 Semi-cupling lcking grub 18 Key 19 O-ring lubricant seal 0 Radial lubricant seal 1 Wrmwheel bearing Threaded cver lcking grub 3 Acme screw lcking grub 4 Plain washer 5 Lck nut 6 Sltted spring pin 7 Grease nipple 8 Cver 3 1 18 10.1, 10.3 18 7 18 1 18 3 9.1 10. 10.1 14 11 1 9. 14 17 5 8 10.1 11 1 13.1 13. 13.3 15 16 Fr spare parts rders we recmmend yu t refer t the relative prduct serial number, marked n the prduct label fixed n the screw jack husing. 85

Screw jacks INSTALLATION MAINTENANCE LUBRICANTS Transprt and handling Screw jacks with munted acme screw and all relevant fittings can be ften difficult t handle because f their verall dimensins. Therefre, we recmmend t handle the prducts with care during transprt and handling t avid damages f the mechanical parts and/r fittings and als t prevent any risk fr the emplyed persnnel. Screw jack supprting pints shuld be previusly identified and used during transprt r t raise it by handling. In case f dubts, please cntact SERVOMECH S.p.A. fr supprt t prevent any pssible damage! Strage During strage, screw jacks shall be prtected against atmspheric agents and the risk that dust r ther plluters settle n the acme screw and n ther mving parts. In case f lng strage perids, fr example mre than 6 mnths, it is necessary t mve the input shafts t avid damaging f the bearings. Furthermre, keep all nt painted parts prperly lubricated t prevent xidatin. Installatin The screw jack must be installed t wrk with push r pull axial lad nly, aviding lateral and radial lad. The crrect perpendicularity between acme screw axis and screw jack fixing plane shall be checked carefully. The installatin f many screw jacks fr synchrnized lifting mvement requires particular attentin n tw different factrs: alignment f lad supprting pints: screw ends in case f travelling acme screw, brnze nut in case f travelling nut; use f shafts and cuplings with high trsinal stiffness, t assure a perfect synchrnism f all lifting pints. Cmmissining and use SERVOMECH screw jacks are supplied with lubricant type and quantity as indicated in the lubricants table. ATTENTION! If nt therwise agreed, the acme screw is usually nt lubricated! The first acme screw lubricatin must be dne by the custmer during the installatin and strictly befre using the screw jack. Befre activating the screw jack, the fllwing checks must be carried ut: input shaft rtating directin and relative acme screw r nut linear mtin directin; strke end switches psitin cannt exceed the given limits; prper cnnectin f mechanical drive and electric mtr (rtating directin and mtr supply vltage). During cmmissining, d never exceed the duty cycle F u [%] allwed fr the screw jack! Any abuse f such duty cycle F u [%] can cause verheating and unintentinal premature damaging. 4 Maintenance Scheduled maintenance shall be carried ut n screw jacks depending n the relevant use and envirnment cnditins. Acme screws must be peridically greased with the lubricant stated in the table r equivalent ne. Further wrm gearbx lubricatin has t be dne nly in case f verified lubricant leakage. Fr further infrmatin abut installatin and maintenance refer t the screw jacks Use and Maintenance Manual. 86

Screw jacks Lubricants table SCREW JACK WORM GEARBOX ACME SCREW - NUT MA 5 0.07 kg AGIP Grease SLL 00 MA 10 0.14 kg MA 5 0.35 liter MA 50 0.75 liter MA 80 0.75 liter AGIP BLASIA S 0 (il) MA 100 1.5 liter MA 00.3 liter MA 350 4 liter SJ 5 0.07 kg SJ 10 AGIP Grease SM 0.14 kg SJ 5 0.3 kg SJ 50 0.6 kg SJ 100 0.5 kg SJ 150 1.5 kg SJ 00 kg SJ 50 kg SJ 300 AGIP Grease SLL 00 kg SJ 350 kg SJ 400 3 kg SJ 600 3 kg SJ 800 8 kg SJ 1000 8 kg SHELL Gadus S V100 PRODUCT LABEL Every SERVOMECH screw jack is prvided with a prduct label, see picture belw, which allws the unit identificatin and gives technical infrmatin abut the prduct. RATIO () PRODUCT CODE (1) STROKE (3) LENGTH ANZOLA EMILIA (BO) - ITALY Phne: + 39 051 6501711 Fax: + 39 051 734574 DELIVERY DATE (5) (4) SERIAL NUMBER (6) 1) Prduct cde: is an alphanumeric cde stating the type, size rati, input versin and strke end switches f the unit; ) Rati: is the rati f wrm gear; 3) Strke length: is the strke length in millimetres (mm) achievable by the screw jack; 4) Linear speed: is the screw jack linear speed in millimetres per secnd (mm/s), fr screw jacks supplied with an electric mtr; if the mtr is nt supplied, the field is blank; 5) Delivery date: is the assembly date, expressed in week/year (example: 37/10 = week 37 f year 010), which usually is als the delivery date; this date is cnsidered as warranty reference; 6) Serial number: is the number referred t the unit and assures the exact identificatin f the prduct, even after a lng time; it must be given as reference when rdering spare parts fr the unit. 4 87

SELECTION INQUIRY screw jacks with travelling screw - data sheet - Page 1 f Date: / / Cmpany: Address: Cntact persn: Psitin: Telephne: Fax: E-mail: APPLICATION: SKETCH - APPLICATION LAYOUT plane view Example screw jacks... bevel gearbxes gearbx with mtr screw jacks... Side view f a single screw jack 4 88 UPWARD MOUNTING DOWNWARD MOUNTING HORIZONTAL MOUNTING & 7 SERVOMECH S.p.A. + 39 051 6501711 + 39 051 734574 E-mail: inf@servmech.cm

SELECTION INQUIRY screw jacks with travelling screw - data sheet - Page f Date: / / NUMBER OF SCREW JACKS PER APPLICATION: STROKE REQUIRED: mm ACME SCREW LENGTH: mm TOTAL STATIC FOR APPLICATION: PULL: dan PUSH: dan MAX. STATIC FOR SINGLE SCREW JACK: PULL: dan PUSH: dan at STROKE mm SCREW JACK MOUNTING: Euler I (screw jack husing firmly fixed t the base free travelling acme screw end) Euler II (screw jack husing and travelling acme screw end fixed t pivting supprts) Euler III (screw jack husing firmly fixed t the base guided travelling acme screw end) SCREW JACK SUBJECTED TO VIBRATIONS NOT SUBJECTED TO VIBRATIONS TOTAL DYNAMIC FOR APPLICATION: PULL: dan PUSH: dan MAX. DYNAMIC FOR SINGLE SCREW JACK: PULL: dan PUSH: dan at STROKE mm REQUIRED: mm/s mm/min m/min SINGLE STROKE PERFORMING TIME: s DUTY CYCLE: cycles / hur wrking hurs / day Ntes: LIFETIME REQUIRED: cycles clck hurs calendar days Ntes: ENVIRONMENT: TEMPERATURE C DUST HUMIDITY % POLLUTER Flange end Threaded end Rd end Bellws Guides Axial backlash adjustment Prtective tube Stp nut Safety nut Anti-turn device Strke end switches Suggestins based n previus experiences f similar applicatin: 4 Ntes: Number f screw jacks required: & 7 SERVOMECH S.p.A. + 39 051 6501711 + 39 051 734574 E-mail: inf@servmech.cm 89

SELECTION INQUIRY screw jacks with travelling nut - data sheet - Page 1 f Date: / / Cmpany: Address: Cntact persn: Psitin: Telephne: Fax: E-mail: APPLICATION: SKETCH - APPLICATION LAYOUT plane view Example screw jacks... bevel gearbxes gearbx with mtr screw jacks... Side view f a single screw jack 4 90 UPWARD MOUNTING DOWNWARD MOUNTING HORIZONTAL MOUNTING & 7 SERVOMECH S.p.A. + 39 051 6501711 + 39 051 734574 E-mail: inf@servmech.cm

SELECTION INQUIRY screw jacks with travelling nut - data sheet - Page f Date: / / NUMBER OF SCREW JACKS PER APPLICATION: STROKE REQUIRED: mm ACME SCREW LENGTH: mm TOTAL STATIC FOR APPLICATION: PULL: dan PUSH: dan MAX. STATIC FOR SINGLE SCREW JACK: PULL: dan PUSH: dan at STROKE mm SCREW JACK MOUNTING: Euler I (screw jack husing firmly fixed t the base free travelling nut) Euler II (screw jack husing and travelling nut fixed t pivting supprts) Euler III (screw jack husing firmly fixed t the base guided travelling nut) SCREW JACK SUBJECTED TO VIBRATIONS NOT SUBJECTED TO VIBRATIONS TOTAL DYNAMIC FOR APPLICATION: PULL: dan PUSH: dan MAX. DYNAMIC FOR SINGLE SCREW JACK: PULL: dan PUSH: dan at STROKE mm REQUIRED: mm/s mm/min m/min SINGLE STROKE PERFORMING TIME: s DUTY CYCLE: cycles / hur wrking hurs / day Ntes: LIFETIME REQUIRED: cycles clck hurs calendar days Ntes: ENVIRONMENT: TEMPERATURE C DUST HUMIDITY % POLLUTER Cylindrical end Bellws Brnze nut Bellws Axial backlash adjustment Safety nut Suggestins based n previus experiences f similar applicatin: 4 Ntes: Number f screw jacks required: & 7 SERVOMECH S.p.A. + 39 051 6501711 + 39 051 734574 E-mail: inf@servmech.cm 91

Servmech NEW IDEAS IN LINEAR MOTION SCREW JACKS CHECK SHEET M-PRO-10 Release 0 CODE: STROKE: ACME SCREW: BALL SCREW: ACCESSORIES: 4 SCREW JACKS MAIN DIMENSIONS: RETRACTED JACK LENGTH: EXTENDED JACK LENGTH: MAX. WORKING STROKE (La Lc): Lc = mm La = mm C = mm Servmech QMS PASSED Date: Signature: 9

INPUT SHAFT ROTATION SCREW OR NUT LIFTING DIRECTION WARNING! 1. The values Lc (retracted jack length), La (extended jack length) and C (max. wrking strke) are the extreme permissible values.. Fr a crrect installatin and cmmissining f the screw jack see The Installatin, Use and Maintenance Manual. 3. The fllwing peratins must be dne BEFORE cmmissining: ensure that the breather plug is in the highest psitin respect t all ther plugs; lubricate acme r ball screw nut; cnnect the strke limit device t the electric cntrl circuit f the screw jack r lifting system; check the lifting directin f the acme r ball screw (Mdel A) r nut (Mdel B). NOTE: WORMGEAR LUBRICANT: 4 SCREW NUT LUBRICANT: SERVOMECH s.p.a. Via Mnald Calari, 1 40011 Anzla Emilia (BO) ITALY Phne: + 39 051 6501.711 Fax: + 39 051 734574 E mail: inf@servmech.cm 93

Screw jacks SCREW JACK LIFTING SYSTEMS SERVOMECH can supprt custmers by selecting the cmplete drive slutin fr screw jack systems: screw jacks with flange fr mtr munting r with input shaft, AC 3-phase r 1-phase electric mtrs, DC electric mtrs, servmtrs inverter drives screw jacks with cntrl f axial psitin and linear speed bevel gears cnnecting transmissin shafts and cuplings general technical supprt, fr example: - screw jack selectin - lifetime estimatin and calculatin - lay-ut system drawings - 3D mdels and D drawings available thrugh web-cnfiguratr n www.servmech.cm r via e-mail, n specific request t SERVOMECH Engineering Dpt. Single mtrized screw jack Screw jack with plug-in flange and hllw input shaft+ IEC B5 r B14 mtr Screw jack with bell-husing and cupling + IEC B5 r B14 mtr Screw jack with single input shaft + cupling + IEC B3 mtr LAY-OUT: Tw pints lifting systems Lay-ut: -1 4 Lay-ut: - Lay-ut: C Lay-ut: -3 94

Screw jacks SCREW JACK LIFTING SYSTEMS LAY-OUT: Three pints lifting systems Lay-ut: 3-1 Lay-ut: T Lay-ut: 3- Lay-ut: 3-3 LAY-OUT: Fur pints lifting systems Lay-ut: H Lay-ut: U 4 Lay-ut: IN-LINE 95

Linear actuatrs ATL Series with acme screw 7 sizes available lad capacity frm 4 kn t 80 kn linear speed frm 1.5 mm/s t 150 mm/s BSA Series with ball screw 7 sizes available lad capacity frm 4 kn t 60 kn linear speed frm 1.5 mm/s t 10 mm/s UAL Series with acme screw 5 sizes available lad capacity frm kn t 15 kn linear speed frm 0 mm/s t 500 mm/s UBA Series with ball screw 5 sizes available lad capacity frm kn t 15 kn linear speed frm 40 mm/s t 500 mm/s CLA Series with acme screw 3 sizes available lad capacity frm 8 kn t 5 kn linear speed frm 4 mm/s t 56 mm/s CLB Series with ball screw 3 sizes available lad capacity frm 6 kn t 5 kn linear speed frm 5 mm/s t 80 mm/s SEA Series with acme screw 5 sizes available lad capacity frm 15 kn t 00 kn linear speed frm mm/s t 70 mm/s