Product 1: Top Guided Single Seated Control Valves
Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material: Carbon steel, Stainless steel, Alloy steel Operation: Pneumatic diaphragm actuator, Pneumatic piston actuator, Electric actuator Model TT-HTS Top-guided Single Seated Control Valves are designed for heavy-duty service. The compact valve body, having a S-shape flow passage that features low-pressure loss, allows a large flow capacity, range ability, and high accuracy flow characteristics. The valve plug is highly vibration-resistant as a top guide section, which has a large sliding area, holds it. The flow shut-off performance complies with the IEC or JIS Standards. The actuator integrated with simplest mechanisms utilizes a compact yet powerful diaphragm actuator loaded with multiple springs. The model HTS Control Valves are widely applicable for reliable control, with high shut-off performance, in high or low temperature, high-pressure process lines. SPECIFICATIONS Body Type: Straight-through, cast globe valve Nominal size: 1-1/2, 2, 2-1/2, 3, 4, 6 and 8 inches Pressure rating: JIS 10K, 16K, 20K, 30K, 40K ANSI Class 125, 150, 300, 600 JPI Class 125, 150, 300, 600 End connection: Flanged end (FF, RF, RJ, LG) Welded end; SW (1-1/2, 2 inches), BW (2-1/2 to 8 inches) VALTORQUE is one of the lead manufacturing globe control valves, including single seated globe control valve automated with pneumatic diaphragm actuator/spring return, globe control valve automated with pneumatic double acting actuator, single seated control valve automated with electric actuator. Size 1-1/2'' ~ 5'' globe control valve in the stock (lager sizes available). Welcome to wholesale control valve from us, all the products are with ISO9001 and CE certificate. High Quality, Competitive price and Good service will help you expand your business.
Product 2: Automatic Diaphragm Actuated Control Valves
Model: VT, TAT, and SW Size: 1/2'' ~ 5'' (DN25 ~ DN125) Pressure Rating: JIS 10K, PN16 Material: SCS14, SCS13, FCD-45, WCB End Connection: Flanged TYPE: Diaphragm type two port Body Material: SCS14, SCS13, FCD-45, WCB Diaphragm Material: Neoprene Trim Material: 1.4021 Admissible Temperature Range: -10ºC-+200ºC Nominal Sizes: DN15-DN125 Plug Travel: 20mm for all size Maximal Leakage: 0.01%KV Supply Air pressure: Max.3.0Kgf/cm2 (100psi) Signal input: 4-20mA DC I. Service: For steam, air, water, oil and other fluids Air supply: 1.4 ~ 2.8kg/cm 2 Operating air pressure: 0.2-1.0, 0.4-2.0 kg/cm 2 Connection Rating: JIS 10K
DN (mm) Size (inch) L H1 H2 H D 15 1/2'' 160 90 430 520 250 20 3/4'' 160 90 430 539 250 25 1'' 160 90 430 539 250 32 1-1/4'' 160 90 430 539 250 40 1-1/2'' 205 100 590 690 250 50 2'' 222 108 609 710 320 65 2-1/2'' 230 120 620 720 320 80 3'' 260 130 630 760 320 100 4'' 280 145 660 850 320 The part of name and material Item Parts Name FC-250 SCS 13(SUS 304) 1 Diaphragm Neoprene Neoprene 2 Actuator Stem SS 41 SS 41 3 Yoke FC-250 FC-250 4 Plug Stem SUS 304 SUS 304 5 V-packing Teflon Teflon 6 Bonnet FC-250 SCS 13 7 Plug SUS 304 SUS 304 8 Sealing Teflon Teflon 9 Body FC-250 SUS 304 10 Bottom Flange FC-250 SCS 13 VALTORQUE is one of the lead manufacturing Automatic Diaphragm Actuated Control Valves, automated with pneumatic diaphragm actuator/spring return or automated with electric actuator. Size 1/2''~4'' Automatic Diaphragm Actuated Control Valves in the stock (lager sizes available). Welcome to wholesale control valve from us, all the products are with ISO9001 and CE certificate. High Quality, Competitive price and Good service will help you expand your business.
Product 3: CV3000 series Top-Guided Single-Seated Control Valves
Type: Globe Size: 1/2'' - 4 (DN15 DN100) Pressure Rating: ANSI 150 ~ ANSI 300 (PN16~PN64, JIS10K~JIS30K) Body Material: Carbon steel, Stainless steel, Alloy steel Operation: Pneumatic diaphragm actuator, Pneumatic piston actuator, Electric actuator The CV3000 series range of Top-guided Single-seat Control Valves features a compact valve body with excellent flow control and minimal pressure loss. CV3000 valves have large Cv values, high range ability, and accurate flow control performance. When securely held in place by a top-guided stem with a long stroke, the valve plug is highly resistant against vibration and provides flow shutoff performance that fully satisfies IEC standards. The valve also features a compact but powerful multi-spring actuator. Model CV3000 series control valves are especially suitable for process control applications where high reliability and tight flow shutoff are essential. 1. Selection of CV3000 series specifications Selection of control valves has traditionally required knowledge and experience. However, CV3000 series offers you more accurate product specifications, so that you can easily pinpoint the control valve that satisfies fluid specifications (such as flow rate, pressure and temperature) at your plant and provides the functions that you need. (To start your process of selecting specifications, open the Model Selection on page 26 and 29, and follow the instructions on the selection map in Figure 1.) If you do not find a valve that completely satisfies your requirements, Please just free to contact the VALTORQUE for assistance. 2. Basic model numbers Basic model: 1/2 to 4 inches Model AGVB: JIS 10K, ANSI 150, JPI 150 Model AGVM: JIS 16K, JIS 20K, JIS 30K, ANSI 300, JPI 300 3. Optional specifications 3-1 Body Figure 2 shows optional specifications of the body.
Figure 2 3-1-1 Nominal sizes VALTORQUE manufactures diameters from 1/2 inch (15 mm) to 4 inches (100 mm). 3-1-2 Port size and flow control characteristics The selection of the port size and the rated Cv value falls within the scope of Table 1 according to the Nominal size. For nominal sizes 1inch (25 mm) or less, port sizes are expressed in terms of Cv values. Flow control characteristics depend on the rated Cv value, be set to linear model or equal percentage model. Based on the rated Cv value and the calculated necessary Cv value, check the controllability (valve position) using the flow control characteristics Tables in Figure 4, 5, and 6. 3-1-3 Pressure rating and end connection (flange type) We manufacture RF: JIS 10K, 16K, 20K, 30K (JIS B2210-1984), ANSI 150, 300 (ASME/ANSI B16.5-1988), JPI 150, 300 (JPI-7S-15-1993) Option: Socket weld, butt weld For other rated pressures and connection types, you are recommended to consider the CV 3000 series of control valves.
3-1-4 Bonnet style We manufacture bonnets that can be used at fluid temperatures ranging from -196 C to 400 C. 3-1-5 Body, plug and seat ring materials For combinations of body, plug and seat ring materials and their applicable temperature ranges, see Table 7. In some ranges the plug seat ring material needs hardening treatment. See Figure 9. When you select a soft seat, refer to Figure 10. 3-1-6 Valve seat leakage For the seat leak performance when the valve is fully closed, select from among the following four classifications, which conform to IEC 60534-4:1999 and JIS B 2005-4:2008 : Class IV: 10-4 rated Cv value (0.01% of rated Cv value) Class IV-S1: 5 10-6 X rated Cv value (0.0005% of rated Cv value) Class V: 1.8 10-4 Valve differential pressure (MPa) Port size (mm) l/h Class VI:3 valve differential pressure (MPa) leakage coefficient ml/min. shown below VALTORQUE is one of the lead manufacturing globe control valves, including single seated globe control valve automated with pneumatic diaphragm actuator/spring return, globe control valve automated with pneumatic double acting actuator, single seated control valve automated with electric actuator. Sizes 1/2'', 3/4'', 1 ~ 4'' globe control valve in the stock (lager sizes available). Welcome to wholesale control valve from us, all the products are with ISO9001 and CE certificate. High Quality, Competitive price and Good service will help you expand your business.
Product 4: Top Guided Single Seated Control Valves with Steam Jacket
Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6'' Pressure Rating: ANSI 150 ~ ANSI 300 (PN16~PN64, JIS10K~JIS20K) Body Material: Carbon steel, Stainless steel, Alloy steel Operation: Pneumatic diaphragm actuator, Pneumatic piston actuator, Electric actuator Model TT-HTS Top-Guided Single Seated Control Valves with Steam Jacket are designed for heavy-duty service requiring high diathermic capability. The compact valve body, having an S-Shape flow passage that features low-pressure loss, allows a large flow capacity, range ability, and high accuracy flow characteristics. The valve plug is highly vibration-resistant as a top guide section, which has a large sliding area, holds it. The flow shut-off performance complies with the ANSI Standards. The actuator integrated with simplest mechanisms utilizes a compact yet powerful diaphragm actuator loaded with multiple springs. The model HTS Valves are widely applicable for reliable control, with high shut-off performance, in high or low temperature, high-pressure process lines. SPECIFICATIONS Body Type: Straight-through, cast globe valve Nominal size: 1ó, 2, 2ó, 3, 4, 6 inches For combining the nominal size and flange size, refer to Table 1. Pressure rating: JIS 10K, 16K, 20K, ANSI Class 150, 300, JPI Class 150, 300 Material For body/trim material combinations and operating Temperature ranges, refer to Table 2.
Bonnet: Plain bonnet (0 to 230 C), Extension type bonnet (230 to 566 C) Note) Take care not to exceed the operating temperature ranges specified for respective materials. Jacket type: Body; Full-jacket, semi-jacket* Bonnet; without jacket, with jacket* Note) The following structural combinations (*) are used for the jacket. Packing / Grease Grease not provided; When V shaped PTFE packing or PTFE yarn packing is used. Grease provided; when asbestos yarn, PTFE impregnated asbestos yarn, asbestos yarn with graphite, or graphite, or graphite packing is used. Note) PTFE: Poly tetrafluoroethylene Gasket Type: Flat type, serrated type Materials: SUS316, SUS316L, SUS329J1, copper, aluminum Trim Valve plug Single-seated, Contoured type plug High-capacity type (For flow characteristics, refer to Figure 1.) <Metal seat> Equal percentage (%C), Linear (LC)
High-flow characteristics type <Metal seat> (For flow characteristics, refer to Figure 2.)Equal percentage (%CF), Linear (LCF) Single-seated, Quick-opening type plug<metal (Stellite) seat> (QS) Material For body/trim material combinations and operating Temperature ranges, refer to Table 1. Note) for fluid conditions that require Stellite, refer to Figure 4. Actuator Type Single acting diaphragm actuator (Type PSA1, HA or VA5) Spring Type piston actuator (Type PSA6) Double acting piston actuator (Type VP) Action: Direct or reverse action Diaphragm Type PSA1, HA: Cloth embedded ethylene propylene rubber Type VA: Cloth embedded chloroprene rubber Spring range (Type PSA1, HA or VA5) 20 to 98 kpa {0.2 to 1.0 kgf/cmç} or 80 to 240 kpa {0.8 to 2.4 kgf/cmç} (Type PSA6) 200 to 340 kpa {2.0 to 3.5 kgf/cmç} or 200 to 390 kpa {2.0 to 4.0 kgf/cmç} Supply pressure Diaphragm actuator Type HA, PSA1: 120 to 390 kpa {1.2 to 4.0 kgf/cmç} Type VA5: 120 to 270 kpa {1.2 to 2.8 kgf/cmç} Spring type piston actuator Type PSA6: 400 to 500 kpa {4.0 to 5.0 kgf/cmç} Piston actuator Type VP: 290 to 490 kpa {3.0 to 5.0 kgf/cmç} Note) Allowable differential pressure varies depending on spring range and air supply pressure.