Pneumatically-Operated, Single-Seated Control Valve
|
|
- Barrie Sullivan
- 6 years ago
- Views:
Transcription
1 No. SS-ACT OVERVIEW The NEW10-III is a compact, lightweight, and economical simple-function control valve designed for JIS10K process line. It is highly reliable and best suited for process con trol of the line. NEW10-III (New Ten-Three) Pneumatically-Operated, Single-Seated Control Valve Model ACT SPECIFICATIONS Body Type Straight-through type, cast glove valve Nominal size 1/, 3/4, 1, 1-½,, -½, 3 inches Pressure rating JIS 10K End connection Flange end FF (SCPH ) : JIS B RF (SCPH, SCS13A) : JIS B Material Carbon steel (SCPH), stainless steel (SCS13A) Note: Refer to Table 3 for different configurations of the valve body and trim materials and for the operat ing temperature ranges. Bonnet Plain bonnet Fluid temperature : to +00 C (SCPH, SCS13A) Gland type Screw gland (with O-ring) Packing / Grease None asbestos: V shaped PTFE (without grease) Gasket Bonnet, Body: serrated type (SUS316 + PTFE coating) Seat: Flat type (SUS316 + PTFE coating) Note: 1. PTFE: polytetrafluoroethylene resin.. Seat: applicable to oil free specification only. Trim Valve plug Single-seated contoured plug Equal percentage metal seat (%C) Equal percentage soft seat (%T) Material SUS316, SUS316 stellite SUS316 + PTFE combined with carbon fiber (In the case of oil free specification, PTFE with glass fiber.) Type Multispring-type diaphragm actuator (Model PSK1) Action Direct or reverse action Diaphragm Cloth-embedded, ethylene propylene rubber 0 to 100 kpa {0. to kgf/cm } 40 to 10 kpa { to 1. kgf/cm } 80 to 40 kpa {0.8 to.4 kgf/cm } 10 to 90 kpa {1. to 3.0 kgf/cm } 10 to 340 kpa {1. to 3. kgf/cm } Note: and air supply pressure vary depending on allowable differential pressure. th edition
2 No. SS-ACT Air connection Rc1/4, 1/4NPT internal thread External bolts and nuts SUS304 Yoke material A16WCB (SCPH equivalent) Ambient temperature 30 to +70 C Valve action Direct action Air-to-close : valve closes at signal increase Reverse action Air-to-open : valve opens at signal increase Optional accessories (model VPE, AVP or HEP), pressure regulator with filter (model KZ03), top-mounted hand wheel, limit switch (model VCX), skinner solenoid valve Note: For the optional items, refer to the specification sheets and installation drawings of the respective accessories. Additional specifications (by special order) Oil/water free treatment Copper free specification Saline damage countermeasures Vacuum service High-pressure gas safety law Performance Rated Refer to Table 4. Flow characteristics Refer to Figure 1 through Figure 4. Inherent rangeability Refer to Table 1 below. Table 1. Inherent rangeability Nominal size (inches) Rated Inherent rangeability 0 : 1 1/ 30 : 1,, 3/4,,, 8.0 1,,, 8.0, 14 1-½ 14, 30 0 : 1 30, 0 -½ Azbil Corporation Allowable differential pressure Refer to Table through Table 8. Leakage specification IEC :006 or JIS B 00-4:008 Class IV (metal seat): 0.01% of maximum valve capacity Class VI (soft seat): 3 ΔP (MPa) (following leakage factor) ml/min Table. Leakage factor ~ 1 1-½ -½ 3 Leakage factor Hysteresis error Within 1% F.S. (With positioner) Within 10% F.S. (Without positioner) Linearity Within ± % (model AVP, HEP with positioner) Within ± 3% (model VPE with positioner) Within ± 10% (Without positioner) Operatig time 1. sec. (With positioner) Dimensions Refer to Figure and Table 9. Weight Refer to Table 9. orientation Refer to Figure 6 Finish Blue (Munsell 10B/10) or silver, or another specified color. Table 3. Body/trim material combinations and operating temperature range ( C) Body material SCPH SCS13A Trim material SUS316 to +00 to +00 SUS316 stellite to +00 to +00 SUS316 soft seat to +00 to +00 Table 4. and travel Rated Cv value Nominal size (inches) Equal percentage Metal seat Soft seat 1/ 3/ Travel value (mm) 0 1-½ -½ ½ 1-½ -½
3 Azbil Corporation No. SS-ACT (%) 0 10 (%) Travel (%) Figure 1. Equal percentage (size: 1/ to 1 inches) Travel (%) Figure. Equal percentage (size: 1-½ to inches) (%) 0 10 (%) Travel (%) Figure 3. Equal percentage (size: -½ inches) Note: The above graphs indicate typical flow characteristics Travel (%) Figure 4. Equal percentage (size: 3 inches) Allowable differential pressure Metal seat Table. Air-to-close Differential pressure (MPa) ½ -½ to to PSK1D to to Note: ; is necessary, ; Can be operated either with or without positioner. Table 6. Air-to-open Differential pressure (MPa) ½ -½ to to PSK1R to to Note: ; is necessary, ; Can be operated either with or without positioner. 3
4 No. SS-ACT Soft seat Azbil Corporation Table 7. Air-to-close Differential pressure (MPa) ½ -½ to to 100 PSK1D to to Note: ; is necessary, ; Can be operated either with or without positioner. Table 8. Air-to-open Differential pressure (MPa) ½ -½ to to PSK1R to to Note: ; is necessary, ; Can be operated either with or without positioner. 4
5 Azbil Corporation No. SS-ACT H 3 Table 9. Dimensions and weight Nominal size (inches) Dimensions (mm) A Weight (kg) 1/ / ½ ½ Note: * : Face-to-face dimensions conform to following standards. -IEC :001 -JIS B :00 H Figure. A Face-to-face and dimension drawing Flow direction Flow direction Flow direction Flow direction (Standard) Figure 6. orientation Note: 1) Indicate by position number when installation other than the standard type is required. ) In the case of the model PSK1 actuator, a top mounted hand wheel shall be attached.
6 No. SS-ACT Azbil Corporation 6
7 Azbil Corporation No. SS-ACT
8 Please read Terms and Conditions from the following URL before ordering and use. Specifications are subject to change without notice Kawana, Fujisawa Kanagawa 1-8 Japan (13) 8 1st edition: Nov. 00 th edition: June 016 No part of this publication may be reproduced or duplicated without the prior written permission of Azbil Corporation.
Ceramic Trim Angle Control Valves
No. SS2-8113-2610 Ceramic Trim Angle Control Valves Model HAF OVERVIEW Model HAF ceramic trim angle control valves provide the valve plug and sheet ring employing high performance ceramic with excellent
More informationLabyrinth Trim Angle Control Valves
No. SS2-8113-2620 Labyrinth Trim Angle Control Valves Model HAL OVERVIEW Model HAL labyrinth trim angle control valves provide the valve plug with Labyrinth groove to restrict generation of cavitation
More informationModel HIT. Corrosion-Resistant PTFE Body Control Valves OVERVIEW SPECIFICATIONS. No. SS
No. SS2-8193-0200 Corrosion-Resistant Body Control Valves Model HIT OVERVIEW The Corrosion Resistant Body Control Valves (model HIT) are best suited for handling corrosive fluids such as acids and alkali
More informationThree Way Control Valves
No. SS2-HDT110-0100 Three Way Control Valves Model HDT OVERVIEW The valve model HDT is a three-way control valve for diverting service. It has a small-sized, high-output diaphragm motor which is suitable
More informationAngle type Control Valves for High Pressure Service
No. SS2-HAH100-0100 Angle type Control Valves for High Pressure Service Model HAH OVERVIEWS The high service angle type control valves (model HAH) are rated at ANSI 2500 and hard alloy is employed to valve
More informationCV3000 Series Pressure-Balanced Cage type Control Valve
No. SS2-ACP110-0100 OVERVIEW The model ACP pressure-balanced cage type control valves are designed for heavy duty service. The valve plug employs a pressure balance function to control high differential
More informationLow leakage Pressure Balanced Cage type Control Valves Model AC2
No. SS2-AC2001-00 Low leakage Pressure Balanced Cage type Control Valves Model AC2 Overview The model AC2 low leakage pressure balanced cage type control valves are designed for heavy duty service. The
More informationThree Way Control Valves
No. SS2-MT100-0100 Three Way Control Valves Model MT OVERVIEW The valve model MT is a three-way control valve for diverting and mixing service. The actuator employed is of a multispring type and has a
More informationCV3000 Series Low-Noise Cage type Control Valve Model ACN
No. SS2-ACN110-0100 CV3000 Series Low-Noise Cage type Control Valve Model ACN OVERVIEW The model ACN low-noise cage type control valves are designed to reduce acoustic noise in services of compressible
More informationCV3000 Series Smart-Port Single Seated Control Valves Model HLC
CV3000 Series Smart-Port Single Seated Control Valves Model HLC OVERVIEW Model HLC Small-Port Cage Guide Type Single Seated Control Valves are designed for high differential pressure Service where fluid
More informationTop-Guided Single Seated Control Valves (Rating : ANSI 600 or Less)
No. SS2-8-0 Top-Guided Single Seated Control Valves (Rating : ANSI 0 or Less) OVERVIEW Model VST control valves are suitable for use in fluid with slurry because of its one side guiding construction. Guide
More informationCV3000 Series Pressure Balanced Cage type Control Valve
No. SS2-8113-1100 CV3000 Series Pressure Balanced Cage type Control Valve OVERVIEW Model HCB Pressure Balanced Cage Type Control Valves are designed for heavy duty services. The compact valve body, having
More informationCage type Single Seated Control Valves
No. SS-8-00 OVERVIEW Model HSC Cage Type Single Seated Control Valves are designed for high differential pressure heavy-duty service where flashing/cavitation may occur. Further, they are ideal for preventing
More informationHigh Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500)
High Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500) Model VDC OVERVIEW Model VDC high pressure service control valve with body rating of ANSI 900, JIS 63K or up provides
More informationCV3000 Alphaplus series Top and Bottom Guided Double-Seat Control Valves (6 to 12inches)
No. SS2-ADV100-0100 CV3000 Alphaplus series Top and Bottom Guided Double-Seat Control Valves (6 to 12inches) OVERVIEW Model ADVB / ADVM The CV3000 Alphaplus top and bottom guided double-seat control valves
More informationElectric Top-Guided Single-Seated Control Valves
No. SS2-AGV200-0300 CV3000 Alphaplus series Electric Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV3000 Alphaplus range of top-guided single-seat control valves features a compact
More informationD1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
More informationTop-Guided Single-Seated Control Valves
No. SS-AGV00-000 CV000 Alphaplus series Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV 000 Alphaplus range of Top-guided Single-seat Control Valves features a compact valve body
More informationEccentric Rotary Control Valve (For size 1 to 4 inches)
No. SS2-VFR100-0200 FloWing Eccentric Rotary Control Valve (For size 1 to 4 inches) Model VFR OVERVIEW The eccentric rotary control valve, FloWing (model VFR), consists of a straight-through valve body
More informationEccentric Rotary Control Valve (For size 6 to 12 inches)
No. SS2-VFR100-0100 OVERVIEW FloWing Eccentric Rotary Control Valve (For size 6 to 12 inches) Model VFR The eccentric rotary control valve, FloWing (model VFR), consists of a straight-through valve body
More informationTop-Guided Single-Seated Control Valves
No. SS-AGV00-0001 (Rev.11) CV3000 Alphaplus series Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV 3000 Alphaplus range of Top-guided Single-seat Control Valves features a compact
More informationCage Guided Globe Control Valves
Product 1: Pressure Balanced Cage type Control Valve Size: 1-1/2'', 2, 2-1/2'', 3'', 4'', 5'', 6'', and 8'' (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN100, JIS10K~JIS40K) OVERVIEW The model
More informationSingle Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed
More informationSTANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES
STANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES STANDARD SPECIFICATION BALL VALVE STRAIGHT- THROUGH TYPE 301K SERIES GENERAL The 301K series provides ball valves with a special inner
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationOM Corrosion-Resistant Teflon Control Valve Model : HIT User's Manual
OM2-8193-0200 Corrosion-Resistant Teflon Control Valve Model : HIT User's Manual NOTICE While the information in this manual is presented in good faith and believed to be accurate, Azbil Corporation disclaims
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
More informationPNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
More informationSeries 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve
Series 240 Types 3241-1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve ANSI version Application Control valves for PSA plants (Pressure Swing Adsorption) s NPS ½ to 6 Pressure rating
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationWaterMAG. Electromagnetic Flowmeter for Water Applications. Model MCB10A OVERVIEW APPLICATIONS FEATURES. No. SS2-MCB
WaterMAG Electromagnetic Flowmeter for Water Applications OVERVIEW The WaterMAG is an electromagnetic flowmeter for water measurement applications based on field proven Azbil Corporation's technologies.
More informationType and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationMaxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R
Maxifluss Rotary Plug Valve VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN 25
More informationSeries 240 Pneumatic Control Valve Type DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA
Series 240 Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA ANSI version Application Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA) NPS ½ to 6 Pressure
More informationGVER04 GLOBE VALVE. Fundamental Of Engineering Data. Fundamental Of Engineering Data 14.04
GVER04 14.04 GLOBE VALVE Fundamental Of Engineering Data Fundamental Of Engineering Data INDEX 03 04 05 06 07 PRODUT FEATURES MODEL SELECTION GUIDE GLOBE VALVE ASSEMBLY DIMENSION KS/JIS 10K RF, ANSI CL
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationMaxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT
Maxifluss Rotary Plug Valve VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationPython 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON
Python 1500 Series Control Valves Pneumatic and Electric Actuators PYTHON - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing
More informationSmart Electromagnetic Flowmeter Detector for Sanitary use
MagneW3000 PLUS Smart Electromagnetic Flowmeter Detector for Sanitary use Model MGS28U OVERVIEW The MagneW3000 PLUS Smart Electromagnetic Flowmeter for Sanitary use is a high-performance and highly-reliable
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More informationZH series linear actuator control valve. ZHP type Single Seat Series
ZH series linear actuator control valve ZHP type Single Seat Series DATIAN CONTROL VALVE Nowadays with the development of the modernized industrial automatic controlling system progressing, the requirement
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSeries V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator
Series V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator DIN version Application Compact control valve for the process industry Valve size DN 15 to 50 Pressure rating PN 16 to 40
More informationHoneywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
More informationSmart Valve Positioner 700 Series with HART Communication Protocol
No. SS2-AVP702-0100 Smart Valve Positioner 700 Series with HART Communication Protocol OVERVIEW The Smart Valve Positioner 700 Series (model number: AVP7**) not only inherits the reliability of the core
More informationNEW10-III Pneumatic Single-Seated Control Valve Model: ACT. User s Manual
NEW10-III Pneumatic Single-Seated Control Valve Model: ACT User s Manual CM2-ACT100-2001 1st edition: May. 2003, 3rd editon: Nov. 2014 Copyright, Notices and Trademarks Copyright 2003-2014 Azbil Corporation
More informationThe Multivariable Air Flow Meter
The Multivariable Air Flow Meter Model MVC10A/MVC10F OVERVIEW The Multivariable Mass Flow Meter model MVC10A/ MVC10F, a compact has all function necessary to measure nitrogen (N 2 ) gas, carbon dioxcide
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationGV-A Manufactured by Germany s Elster GmbH High-Performance Gas Solenoid Valve for Industrial Applications
No. CP-SS-1880E GV-A Manufactured by Germany s Elster GmbH High-Performance Gas Solenoid Valve for Industrial Applications Overview The GV-A High-Performance Gas Solenoid Valve for Industrial Applications
More informationThe Multivariable Air Flow Meter
No. SS2-MVC200-0100 OVERVIEW The Multivariable Mass Flow Meter AIRcube, a compact has all function necessary to measure nitrogen (N 2 ) gas, carbon dioxcide (CO 2 ) gas and air. The model MVC10A/MVC10F
More informationSmart Valve Positioner for Rotary Valve
OVERVIEW Smart Valve Positioner for Rotary Valve Model SVX is microprocessor-equipped, electropneumatic smart valve positioner for rotary valves. The SVX receives a DC current signal from control devices
More informationSmart Valve Positioner 700 Series with HART Communication Protocol
No. SS2-AVP702-0100 Smart Valve Positioner 700 Series with HART Communication Protocol OVERVIEW The Smart Valve Positioner 700 Series (model number: AVP7**) not only inherits the reliability of the core
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationMaxifluss Rotary Plug Valves VETEC Types 72.3/R and 72.4/R
Maxifluss Rotary Plug Valves VETE Types 72.3/R and 72.4/R Application Double-eccentric control valve for process engineering and industrial applications Nominal sizes DN 25 to 400 NPS 1 to 1 Nominal pressures
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationAir Operated Valve Control Valve
Air Operated Valve Control Valve -1 Step 0 Type/Structure/Features Please refer to this for structure and feature of Air Operated Valve and Control Valve. Step 1 Selection Please look at the ID chart to
More informationSmart Valve explorer Smart Valve Positioner for Rotary Valve. Model SVX100 / SVX102
No. SS2-SVX100-0100 Smart Valve explorer Smart Valve Positioner for Rotary Valve Model SVX100 / SVX102 OVERVIEW Smart Valve explorer (SVX) models SVX100 and SVX102 are microprocessor-equipped, currentpneumatic
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationPYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
More informationSeries 240 Pneumatic Control Valve Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valve Type 3244-1 Type 3244-7 Three-way Valve Type 3244 with long insulating section circulation inhibitor ANSI version Application Mixing or flow-diverting valve for cryogenic
More informationMaxifluss Rotary Plug Valves VETEC Types 73.3/M and 73.7/M
Maxifluss Rotary Plug Valves VETEC Types 7./M and 7.7/M Application Double-eccentric control valve for process engineering, industrial applications, and refineries Nominal sizes DN 25 to 400 1 to 16 Nominal
More informationHoneywell. Series 9130 Mixing/Diverting Seated 3-Way Valves for ANSI DIN/BS 4504 PN10-PN40
Honeywell Series 9130 Mixing/Diverting Seated 3-Way Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 70-16-12-05 EN REV. 2 09/2014 Page 1 of 5 Specification Series 9130 Mixing / Diverting Seated 3-Way Valves
More informationSmart Displacement type Level Transmitter
No. SS-SLX100-0100 Smart Displacement type Level Transmitter model SLX OVERVIEW The SLX series is a complete line of highly accurate and reliable high-performance torque tube type displacement level transmitters
More informationSeries 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More informationPython Series Control Valves
Python - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing cost of fuel, delivering media in the most efficient way increases
More informationACTIVAL Motorized Two-Way Valve with Flanged-End Connection (Spring Return Type Actuator) (JIS 10K-FC200, -SCS13A)
Specifications/Instructions ACTIVAL Motorized Two-Way Valve with Flanged-End Connection (Spring Return Type Actuator) (JIS 10K-FC200, -SCS13A) General ACTIVAL Models VY51XXK and VY51XXH are series of motorized
More informationEvery component precisely matched
Series 8B Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
More informationACTIVAL Motorized Two-Way Valve with Flanged-End Connection for High Differential Pressure Application (JIS 10K-FC200, -SCS13A)
Specifications/Instructions ACTIVAL Motorized Two-Way Valve with Flanged-End Connection for High Differential Pressure Application (JIS 10K-FC200, -SCS13A) General ACTIVAL Model VY51XXJ for high differential
More informationMaxifluss Rotary Plug Valve - VETEC Type 82.7
Valve Size NPS 1 to 12 ANSI Pressure Class CL 150 and 300 Temperature Range of Medium -320 F to +1022 F (-196 C to +550 C) Valve Body Material Cast carbon steel Low temperature carbon steel Cast stainless
More informationGLOBE 3 WAY CONTROL VALVE SERIES INTRODUCTION
GLOBE 3 WAY CONTROL VALVE SERIES - 130 INTRODUCTION Pneucon' 3 way control valves are used to combine two flows or to divert one flow into two outlets. They are designed to replace and perform the functions
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationMaxifluss Rotary Globe Valves VETEC Type 82.7
Maxifluss Rotary Globe Valves VETEC Type 82.7 ANSI version Application Double-eccentric valve for process engineering and industrial applications Valve size NPS 1 to NPS 10 Pressure rating Class 150 and
More informationPneumatic Control Valve Type and Type Micro-flow Valve Type 3510
Pneumatic Control Valve Type 3510-1 and Type 3510-7 Micro-flow Valve Type 3510 ANSI version Application Control valve designed for controlling low flow rates in pilot plants and technical research facilities.
More informationSPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
More informationSeries 240 Type Gas and Type Gas Automatic Shut-off Valves for Gases (valve class D)
Series 240 Type 3241-1-Gas and Type 3241-7-Gas Automatic Shut-off Valves for Gases (valve class D) DIN-DVGW typetested acc. to DIN EN 161 (2013-04) Application Control valve for control systems subject
More informationCV3000 Alphaplus Series Electric Top-Guided Single-Seated Control Valves Model: AGVB / AGVM. User s Manual
CV3000 Alphaplus Series Electric Top-Guided Single-Seated Control Valves Model: AGVB / AGVM User s Manual CM2-AGV300-2001 Copyright, Notices and Trademarks While this information is presented in good faith
More informationThe series 10 butterfly valves has been developed for a large number of applications throughout process industries. The
Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating JIS 20K General : The series 10 butterfly valves has been developed for a large number of applications throughout
More informationACTIVAL Motorized Three-Way Valve with Flanged-End Connection (JIS 10K / FC200)
Specifications/Instructions ACTIVAL Motorized Three-Way Valve with Flanged-End Connection (JIS 10K / FC200) General ACTIVAL Model VY54X0F is a series of motorized three-way valves with flanged connection.
More informationIntroduction. Globe and Angle Body Control Valves. In Line Valve provides Solutions to Flow Control
Introduction Globe and Angle Body Control Valves In Line Valve provides Solutions to Flow Control In Line Valve Globe Control Valves use the variable area generated between the plug and seat to control
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationSPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
More informationBaumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
More informationBOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
More informationSVP3000 Alphaplus Smart Valve Positioner (Remote type)
No. SS-AVP00-000 SVP3000 Alphaplus Smart Valve Positioner (Remote type) Model AVP00 and AVP0 OVERVIEW SVP3000 Alphaplus models AVP00 and AVP0 are current-pneumatic smart valve positioners with a separate
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More information