X-RANGE SPECIFIERS GUIDE JANUARY 2018
INDEX Important notes... 2 Bench desks... 4-22 Standard frames... 4-7 Square frames... 8-11 Rectangular frames... 12-15 A-Frames... 16-19 Intal and add-on modules explaned... 20 Screens for bench desks... 21-22 Heght adjustment kts... 21 Infll panels... 22 Cable management accessores...22-23, 25, 31 Coffee tables... 33 Conference tables (and seatng gudelnes)... 25-26 CPU holders... 3 Electrcal fttngs... 23-24 Freestandng desks and workstatons... 27-31 Flng cabnets... 3 Fnshes (llustratons)... 53 Fttngs for stablsng and lnkng... 24, 37-38 GP desks... 27 Lockers... 35 Meetng tables (rectangular and crcular)... 24 Montor arms... 3 Pedestals (for bench, freestandng and GP desks)... 2-3, 27 Recepton desks... 32-33 Screens QSPA alumnum frame Freestandng desks... 37 Floor standng... 36-37 Bench and GP desks... 21-22 Screens: QPAD fabrc... 38 Seatng... 40-49 Executve chars... 42 Meetng and canteen chars... 45-46 Recepton and breakout seatng... 47-49 Seatng dmensons... 50-52 Workng chars... 42-43 Upholstery prce bands... 41 Storage unts... 34-35 Terms and condtons of sale... 55 Wreless chargng...23, 48 Worksurface shapes... 39 IMPORTANT NOTES Specfcatons X-Range s offered n Beech, Concrete, Maple, Natural Oak, Natural Walnut, Whte, Zebrano and Zebrano Sand MFC (melamne), edged wth 2mm ABS lppng. We also offer the combnaton of tops n any fnsh wth vertcal panels n Whte. Hgh Gloss Whte s offered on selected components. Please note that over a perod of years the surface of melamne may wear and n tme ths may start to degrade ts vsual appearance. Such wear s more notceable on darker fnshes and s not a fault but a characterstc of all melamnes. For ths reason we do not recommend darker melamne fnshes for applcatons where hgh levels of surface abrason may be expected, and recommend the use of mouse mats wth all fnshes. Cable Access Ports are Black on Black tops, Whte wth Whte tops, otherwse Slate. Metalwork s avalable n Slate, Slva and Whte (RAL 9016). Selected components are avalable n Raw Steel (both Matt and Gloss). Fnsh colours prnted n our lterature or vewed on our webste cannot be reled on for colour accuracy: samples of all fnshes are avalable on request from our Customer Servce Department. Pedestals are ftted wth recessed drawer pulls. Storage unts are ftted wth handles, except vertcal tambour doors whch have ntegral fnger pulls. Dmensons are lsted n the order Wdth x Depth x Heght. All dmensons are nomnal. Mantenance X-Range furnture requres no mantenance, and cleanng should be carred out solely wth a damp cloth and soft duster. Spray and wax polshes must not be used. Fabrc upholstery should be vacuumed regularly wth approprate care. Leather upholstery should be cleaned wth a soft damp cloth. Avod placng leather upholstery n drect sunlght or close to heat sources such as radators. Packagng and delvery access X-Range storage unts and pedestals suppled assembled. Desks and most other tems suppled flat packed for assembly on ste. It s the purchaser s responsblty to ensure that buldng access s adequate before orderng: assembled tems cannot be dsmantled once manufactured. In the event of drect delvery by Sven Chrstansen abortve delvery charges may become payable f delvery cannot be effected due to nadequate access, napproprate specfcaton or ste condtons. If n any doubt about buldng access please contact us to arrange a ste survey. Guarantee X-Range furnture s guaranteed for a perod of fve years aganst any defect resultng from faulty materals or workmanshp (three years n the case of movng parts seatng excepted), far wear and tear excluded and subject to approprate use, care and mantenance. Prces, Terms and Condtons All prces are exclusve of VAT. All supples subject to our Terms and Condtons of Sale see p.55. Sven Chrstansen plc reserves the rght to amend or delete products wthout notce. STEEL PEDESTALS STEEL PEDESTAL CUSHION Moble 2 small drawers 1 flng drawer. 390x520x600mm QMFP3/## Narrow Moble 2 small drawers 1 flng drawer. 300x520x600mm QMNP3/## All drawers ftted wth 100% extenson ball bearng runners and sde drawer pulls. Drawers accept both A4 and foolscap suspenson fles. A pentray ncluded wth each pedestal. Upholstered cushon 45mm thck to ft QMFP3 metal pedestal. See X-Range prce lst seatng secton for upholstery prce groups detals. QUMPC Group A fabrc Group B fabrc Group C fabrc Group D fabrc Group E fabrc Replace ## wth metal colour: Black (RAL9005)=BK Slver (RAL 9006: shade brghter than X-Range Slva)=SA Whte (RAL 9016)=WH 2 X-Range Prce Lst January 2018
PEDESTALS MFC (common to both bench desks and general desks) Fxed * Fxed * Moble Low Moble Narrow Moble Pentray 1 small drawer 1 flng drawer. 431x600mm QP2/** Desk heght x 600mm deep 3 small drawers. 431x600mm QP3/** Desk heght x 800mm deep 2 small drawers 1 flng drawer. 431x600x645mm QFP3M/** 1 small drawer 1 flng drawer. 431x600x490mm QLP2M/** 2 small drawers 1 flng drawer. 320x600x645mm QNP3M/** (any of the above pedestals may be used wth X-Range Bench desks) PEDESTALS CUSHION Fts top drawer of any pedestal, except narrow pedestals. 356x238x28 QPEN 2 small drawers 1 flng drawer. 431x600x735mm QEP3/** 2 small drawers 1 flng drawer. 431x800x735mm QDDP3/** All pedestals are lockable. Fxed and Moble unts are for use under 800mm ends of desks. * Fxed pedestals cannot be attached to QD8 desks and QD8F, QL90RF or QL90QF recepton desks, except to specal order because fttng a pedestal leaves nsuffcent user knee room. Fxed pedestals cannot be attached to Bench Desks, Compact Corner Desks or Double-Wave Desks (because of the nwards curve of the tops: we recommend narrow moble pedestals under these desks). Upholstered cushon 50mm thck to ft QLP2M low moble pedestal. The cushon also fts QFP3M pedestal but please note that QFP3M+cushon wll NOT ft under an X-Range Bench desk. For upholstery prce groups please see prce lst seatng secton. FILING CABINETS QUPC Group A fabrc Group B fabrc Group C fabrc Group D fabrc Group E fabrc 2-drawer, lockng. 500x525x735mm, QFC2/** 3-drawer, lockng. 500x525x1065mm, QFC3/** MONITOR ARMS (ft standard VESA mountng holes 75x75mm and 100x100mm) 4-drawer, lockng. 500x525x1395mm, QFC4/** Through-desk adjustable-heght double extenson montor arm (pole heght adjustment). Fts through standard cable port, retanng cable access. Slver F QMATV2/SA Whte s QMATV2/WH Desk-clamp adjustable-heght double extenson montor arm. Slver F QMACV2/SA Whte s QMACV2/WH Through-desk adjustable-heght twn double extenson montor arm. Fts through standard cable port, retanng cable access. Slver F QMATV22/SA Whte s QMATV22/WH Desk clamp montor arms cannot be ftted to sngle-sded sldng top benches, or n the centre of the scallop on fxed top benches wth scalloped tops. Desk-clamp adjustable-heght twn double extenson montor arms (pole heght adjustment). Slver F QMACV22/SA Whte s QMACV22/WH CPU HOLDERS Slatwall and accessory bar mount adjustable-heght sngle extenson montor arm. (see note *1 below). Slver F QMASV1/SA Whte s QMASV1/WH Unversal CPU cradle, heght adjustable. Fts under any desk surface except sldng top and 600mm deep sngle-sded bench desks (see note *2 below). Slver n QCPU2/SA Whte s QCPU2/WH s Whte RAL9010 F Slver RAL9006 n Slver (no exact RAL reference) Whte desk frames are RAL 9016 Unversal CPU cradle, slde/rotate, adjustable for heght. Slver n QCPUSR/SA Whte s QCPUSR/WH X-Range Bench desks addtonally requre converson kt QF581 Wll not ft 600mm deep sngle-sded or sldng top 600mm deep double-sded benches. *1 The sze and weght of some montors can sometmes pull even our very rgd dvdng screens slghtly away from vertcal or cause a screen and others lnked to t to move when a montor s adjusted. If ths may be an ssue, gven the montors beng ftted and the users expectatons, we recommend specfyng desk-mounted montor arms. In any event, screen-mounted montor arms should always be mounted n counterbalanced pars, one on ether sde of a screen, or specal optonal bracng brackets ftted: POA. *2 A specal bracket s avalable to enable fttng to sldng top and 600mm deep sngle sded bench desks: QCPUSB Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Add suffx W for tops n the selected fnsh and all other panels n Whte Add suffx E for the selected fnsh on the drawer/door fronts and all other panels (ncludng the top) n Whte. X-Range Prce Lst January 2018 3
DOUBLE-SIDED BENCH DESKS STANDARD FRAMES FIXED TOPS Intal Add-on Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD610/**/~~ QBD610E/**/~~ QBD610/C/**/~~ QBD610E/C/**/~~ Wre cable trays ncluded 1200mm QBD612/**/~~ QBD612E/**/~~ QBD612/C/**/~~ QBD612E/C/**/~~ as standard. 600mm deep 1400mm QBD614/**/~~ QBD614E/**/~~ QBD614/C/**/~~ QBD614E/C/**/~~ tops compatble only wth 1600mm QBD616/**/~~ QBD616E/**/~~ QBD616/C/**/~~ QBD616E/C/**/~~ steel pedestals or low 1800mm QBD618/**/~~ QBD618E/**/~~ QBD618/C/**/~~ QBD618E/C/**/~~ moble MFC pedestals 2000mm QBD620/**/~~ QBD620E/**/~~ QBD620/C/**/~~ QBD620E/C/**/~~ (QLP2M). FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD810/**/~~ QBD810E/**/~~ QBD810/C/**/~~ QBD810E/C/**/~~ Wre cable trays ncluded 1200mm QBD812/**/~~ QBD812E/**/~~ QBD812/C/**/~~ QBD812E/C/**/~~ as standard. 1400mm QBD814/**/~~ QBD814E/**/~~ QBD814/C/**/~~ QBD814E/C/**/~~ 1600mm QBD816/**/~~ QBD816E/**/~~ QBD816/C/**/~~ QBD816E/C/**/~~ 1800mm QBD818/**/~~ QBD818E/**/~~ QBD818/C/**/~~ QBD818E/C/**/~~ 2000mm QBD820/**/~~ QBD820E/**/~~ QBD820/C/**/~~ QBD820E/C/**/~~ uif usng a double-sded ntal bench desk as a stand-alone, wthout an add-on module or two sde extensons, also order a Central Power Tower to ensure stablty (the cable tray wll have a cutout to accommodate the Power Tower). Please see lstng below. If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. DOUBLE-SIDED BENCH DESKS STANDARD FRAMES FIXED TOPS ntal module stand-alone If an ntal module has ether an add-on module or two sde extensons attached t does not requre a Central Power Tower for stablty (as t s not consdered stand-alone ). Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power Tower ncludes QBT Power Tower 1000mm QBD610T/**/~~ QBD610T/C/**/~~ Wre cable trays ncluded 1200mm QBD612T/**/~~ QBD612T/C/**/~~ as standard. 1400mm QBD614T/**/~~ QBD614T/C/**/~~ compatble 1600mm QBD616T/**/~~ QBD616T/C/**/~~ only wth steel pedestals or 1800mm QBD618T/**/~~ QBD618T/C/**/~~ low moble MFC pedestals 2000mm QBD620T/**/~~ QBD620T/C/**/~~ (QLP2M). FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power Tower ncludes QBT Power Tower 1000mm QBD810T/**/~~ QBD810T/C/**/~~ Wre cable trays ncluded 1200mm QBD812T/**/~~ QBD812T/C/**/~~ as standard. 1400mm QBD814T/**/~~ QBD814T/C/**/~~ 1600mm QBD816T/**/~~ QBD816T/C/**/~~ 1800mm QBD818T/**/~~ QBD818T/C/**/~~ 2000mm QBD820T/**/~~ QBD820T/C/**/~~ If not orderng screens wth double-sded bench desks, nsert /N at the end of the core code, before the /**. Ths ndcates that fxed tops should be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 4 X-Range Prce Lst January 2018
SINGLE-SIDED BENCH DESKS STANDARD FRAMES FIXED TOPS Intal Add-on Modesty panel Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels 1000mm QBS610/**/~~ QBS610E/**/~~ QBS610/C/**/~~ QBS610E/C/**/~~ n/a Cable trays not ftted 1200mm QBS612/**/~~ QBS612E/**/~~ QBS612/C/**/~~ QBS612E/C/**/~~ n/a or compatble wth 1400mm QBS614/**/~~ QBS614E/**/~~ QBS614/C/**/~~ QBS614E/C/**/~~ n/a sngle-sded 600mm 1600mm QBS616/**/~~ QBS616E/**/~~ QBS616/C/**/~~ QBS616E/C/**/~~ n/a deep fxed tops. 1800mm QBS618/**/~~ QBS618E/**/~~ QBS618/C/**/~~ QBS618E/C/**/~~ n/a 2000mm QBS620/**/~~ QBS620E/**/~~ QBS620/C/**/~~ QBS620E/C/**/~~ n/a FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels *1 1000mm QBS810/**/~~ QBS810E/**/~~ QBS810/C/**/~~ QBS810E/C/**/~~ QMP10/** *1 Modesty panels 1200mm QBS812/**/~~ QBS812E/**/~~ QBS812/C/**/~~ QBS812E/C/**/~~ QMP12/** not compatble 1400mm QBS814/**/~~ QBS814E/**/~~ QBS814/C/**/~~ QBS814E/C/**/~~ QMP14/** wth scalloped tops. 1600mm QBS816/**/~~ QBS816E/**/~~ QBS816/C/**/~~ QBS816E/C/**/~~ QMP16/** Cable trays ncluded 1800mm QBS818/**/~~ QBS818E/**/~~ QBS818/C/**/~~ QBS818E/C/**/~~ QMP18/** as standard. 2000mm QBS820/**/~~ QBS820E/**/~~ QBS820/C/**/~~ QBS820E/C/**/~~ QMP20/** Optonal modesty panels are 200mm shorter than the modules they ft (they are nset 100mm from each end). DOUBLE-WAVE TOP OPTION STANDARD FRAMES Rectangular tops on 800mm deep (only) bench desks of 1400mm wdth and larger may be replaced by tops wth a double-wave shape. PEDESTALS AND SCREENS For Pedestals see p.2-3 For Bench Screens see p.21-22 To specfy, add /W to the end of the code (before the frst / ) + per top (double-sded module = two tops). SIDE EXTENSION STANDARD FRAMES (fxed tops only) FIXED RETURN WITH PEDESTAL Unhanded sde extensons. A moble, low moble or narrow moble pedestal may be placed underneath, or a desk-heght 600mm deep pedestal placed on the end. Not sutable for use wth tops less than 1400mm wde. Includes one centrally postoned cable port (can be ftted left or rght). Sze (mm) Code Prce 800x600mm QBR/**/~~ (for fxed top bench desks except 600mm sngle-sded) 800x600mm QBR6S/**/~~ (for fxed top 600mm sngle-sded bench desks) 1000x600mm QBR10/**/~~ (for fxed top bench desks except 600mm sngle-sded) 1000x600mm QBR10S/**/~~ (for fxed top 600mm sngle-sded bench desks) Pedestal wth 2 drawers + fle drawer Unhanded Sze (mm) Code Prce 800x600mm QRP3/** 1000x600mm QRP310/** ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power Towers ncluded wth each add-on module. Further Power Towers may be added at ether end of a bench (800mm deep only), for when benches abut a wall and cables route from skrtng. NOT compatble wth 600mm deep sngle-sded bench. QBT/~~ Bench desks wth fxed tops are 735mm hgh. A Central Power Tower s needed for any stand-alone double-sded ntal bench desk and ncluded n the prce. A QBT (see left) s ftted rotated 90 to maxmze leg room, so that t runs n lne wth the desk rather than across t. As standard, Power Towers have a removable panel on one sde. They may be specfed wth removable panels on both sdes. Add /2D to the code + per tower. Avalable as addtonal Power Tower: QBTD/~~ Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 5
DOUBLE-SIDED BENCH DESKS STANDARD FRAMES SLIDING TOPS Intal Add-on Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD610S/**/~~ QBD610SE/**/~~ QBD610S/C/**/~~ QBD610SE/C/**/~~ Wre cable trays ncluded 1200mm QBD612S/**/~~ QBD612SE/**/~~ QBD612S/C/**/~~ QBD612SE/C/**/~~ as standard. 1400mm QBD614S/**/~~ QBD614SE/**/~~ QBD614S/C/**/~~ QBD614SE/C/**/~~ 1600mm QBD616S/**/~~ QBD616SE/**/~~ QBD616S/C/**/~~ QBD616SE/C/**/~~ compatble only wth steel 1800mm QBD618S/**/~~ QBD618SE/**/~~ QBD618S/C/**/~~ QBD618SE/C/**/~~ pedestals or low moble 2000mm QBD620S/**/~~ QBD620SE/**/~~ QBD620S/C/**/~~ QBD620SE/C/**/~~ MFC pedestals (QLP2M). SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD810S/**/~~ QBD810SE/**/~~ QBD810S/C/**/~~ QBD810SE/C/**/~~ Wre cable trays ncluded 1200mm QBD812S/**/~~ QBD812SE/**/~~ QBD812S/C/**/~~ QBD812SE/C/**/~~ as standard. 1400mm QBD814S/**/~~ QBD814SE/**/~~ QBD814S/C/**/~~ QBD814SE/C/**/~~ 1600mm QBD816S/**/~~ QBD816SE/**/~~ QBD816S/C/**/~~ QBD816SE/C/**/~~ 1800mm QBD818S/**/~~ QBD818SE/**/~~ QBD818S/C/**/~~ QBD818SE/C/**/~~ 2000mm QBD820S/**/~~ QBD820SE/**/~~ QBD820S/C/**/~~ QBD820SE/C/**/~~ uif usng a double-sded ntal bench desk as a stand-alone, wthout an add-on module or two sde extensons, also order a Central Power Tower to ensure stablty (the cable tray wll have a cutout to accommodate the Power Tower). Please see lstng below. If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. DOUBLE-SIDED BENCH DESKS STANDARD FRAMES SLIDING TOPS ntal module stand-alone Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD610ST/**/~~ QBD610ST/C/**/~~ Wre cable trays ncluded 1200mm QBD612ST/**/~~ QBD612ST/C/**/~~ as standard. 1400mm QBD614ST/**/~~ QBD614ST/C/**/~~ compatble 1600mm QBD616ST/**/~~ QBD616ST/C/**/~~ only wth steel pedestals or 1800mm QBD618ST/**/~~ QBD618ST/C/**/~~ low moble MFC pedestals 2000mm QBD620ST/**/~~ QBD620ST/C/**/~~ (QLP2M). SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD810ST/**/~~ QBD810ST/C/**/~~ Wre cable trays ncluded 1200mm QBD812ST/**/~~ QBD812ST/C/**/~~ as standard. 1400mm QBD814ST/**/~~ QBD814ST/C/**/~~ 1600mm QBD816ST/**/~~ QBD816ST/C/**/~~ 1800mm QBD818ST/**/~~ QBD818ST/C/**/~~ 2000mm QBD820ST/**/~~ QBD820ST/C/**/~~ If not orderng screens wth double-sded bench desks, nsert /N at the end of the core code, before the /**. Ths ndcates fxed tops should be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 6 X-Range Prce Lst January 2018
SINGLE-SIDED BENCH DESKS STANDARD FRAMES SLIDING TOPS Intal Add-on Modesty panel Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels 1000mm n/a n/a n/a n/a n/a 1200mm n/a n/a n/a n/a n/a 1400mm n/a n/a n/a n/a n/a 1600mm n/a n/a n/a n/a n/a 1800mm n/a n/a n/a n/a n/a 2000mm n/a n/a n/a n/a n/a SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels *1 1000mm QBS810S/**/~~ QBS810SE/**/~~ QBS810S/C/**/~~ QBS810SE/C/**/~~ QMP10/** *1 Modesty panels 1200mm QBS812S/**/~~ QBS812SE/**/~~ QBS812S/C/**/~~ QBS812SE/C/**/~~ QMP12/** not compatble 1400mm QBS814S/**/~~ QBS814SE/**/~~ QBS814S/C/**/~~ QBS814SE/C/**/~~ QMP14/** wth scalloped 1600mm QBS816S/**/~~ QBS816SE/**/~~ QBS816S/C/**/~~ QBS816SE/C/**/~~ QMP16/** tops. Wre cable 1800mm QBS818S/**/~~ QBS818SE/**/~~ QBS818S/C/**/~~ QBS818SE/C/**/~~ QMP18/** trays ncluded 2000mm QBS820S/**/~~ QBS820SE/**/~~ QBS820S/C/**/~~ QBS820SE/C/**/~~ QMP20/** as standard. Optonal modesty panels are 200mm shorter than the modules they ft (they are nset 100mm from each end). A desk-clamp montor arm cannot be ftted to a sngle-sded bench wth a sldng top: the clamp fouls the bench underframe. Please use a through-desk fttng and, to avod drllng the top, order a specal top ftted wth cable ports. DOUBLE-WAVE TOP OPTION STANDARD FRAMES PEDESTALS AND SCREENS For Pedestals see p.2-3 For Bench Screens see p.21-22 Rectangular tops on 800mm deep (only) bench desks of 1400mm wdth and larger may be replaced by tops wth a double-wave shape. To specfy, add /W to the end of the core code, (before the frst / ) and + per top (double-sded module = two tops). ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power Towers ncluded wth each add-on module. Further Power Towers may be added at ether end of a bench (800mm deep only), for when benches abut a wall and cables route from skrtng. NOT compatble wth 600mm deep sngle-sded bench. QBT/~~ A Central Power Tower s needed for any stand-alone double-sded ntal bench desk and ncluded n the prce. A QBT (see left) s ftted rotated 90 to maxmze leg room, so that t runs n lne wth the desk rather than across t. As standard, Power Towers have a removable panel on one sde. They may be specfed wth removable panels on both sdes. Add /2D to the code + per tower. Avalable as addtonal Power Tower: QBTD/~~ Bench desks wth sldng tops are 741mm hgh. Rear cable access ndcates that the tops are cut very slghtly short to allow cable access along the whole rear edge of the top. Wth scalloped rear edges the tops are full depth wth cable access va the scallop along the central porton of the desk. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 7
DOUBLE-SIDED BENCH DESKS SQUARE FRAMES FIXED TOPS Intal Add-on Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD610/Q/**/~~ QBD610E/**/~~ QBD610/Q/C/**/~~ QBD610E/C/**/~~ Wre cable trays ncluded 1200mm QBD612/Q/**/~~ QBD612E/**/~~ QBD612/Q/C/**/~~ QBD612E/C/**/~~ as standard. 1400mm QBD614/Q/**/~~ QBD614E/**/~~ QBD614/Q/C/**/~~ QBD614E/C/**/~~ 1600mm QBD616/Q/**/~~ QBD616E/**/~~ QBD616/Q/C/**/~~ QBD616E/C/**/~~ compatble only wth steel 1800mm QBD618/Q/**/~~ QBD618E/**/~~ QBD618/Q/C/**/~~ QBD618E/C/**/~~ pedestals or low moble 2000mm QBD620/Q/**/~~ QBD620E/**/~~ QBD620/Q/C/**/~~ QBD620E/C/**/~~ MFC pedestals (QLP2M). FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD810/Q/**/~~ QBD810E/**/~~ QBD810/Q/C/**/~~ QBD810E/C/**/~~ Wre cable trays ncluded 1200mm QBD812/Q/**/~~ QBD812E/**/~~ QBD812/Q/C/**/~~ QBD812E/C/**/~~ as standard. 1400mm QBD814/Q/**/~~ QBD814E/**/~~ QBD814/Q/C/**/~~ QBD814E/C/**/~~ 1600mm QBD816/Q/**/~~ QBD816E/**/~~ QBD816/Q/C/**/~~ QBD816E/C/**/~~ 1800mm QBD818/Q/**/~~ QBD818E/**/~~ QBD818/Q/C/**/~~ QBD818E/C/**/~~ 2000mm QBD820/Q/**/~~ QBD820E/**/~~ QBD820/Q/C/**/~~ QBD820E/C/**/~~ uif usng a double-sded ntal bench desk as a stand-alone, wthout an add-on module or two sde extensons, also order a Central Power Tower to ensure stablty (the cable tray wll have a cutout to accommodate the Power Tower). Please see lstng below. If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. DOUBLE-SIDED BENCH DESKS SQUARE FRAMES FIXED TOPS ntal module stand-alone If an ntal module has ether an add-on module or two sde extensons attached t does not requre a Central Power Tower for stablty (as t s not consdered stand-alone ). Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD610T/Q/**/~~ QBD610T/Q/C/**/~~ Wre cable trays ncluded 1200mm QBD612T/Q/**/~~ QBD612T/Q/C/**/~~ as standard. 1400mm QBD614T/Q/**/~~ QBD614T/Q/C/**/~~ compatble 1600mm QBD616T/Q/**/~~ QBD616T/Q/C/**/~~ only wth steel pedestals or 1800mm QBD618T/Q/**/~~ QBD618T/Q/C/**/~~ low moble MFC pedestals 2000mm QBD620T/Q/**/~~ QBD620T/Q/C/**/~~ (QLP2M). FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD810T/Q/**/~~ QBD810T/Q/C/**/~~ Wre cable trays ncluded 1200mm QBD812T/Q/**/~~ QBD812T/Q/C/**/~~ as standard. 1400mm QBD814T/Q/**/~~ QBD814T/Q/C/**/~~ 1600mm QBD816T/Q/**/~~ QBD816T/Q/C/**/~~ 1800mm QBD818T/Q/**/~~ QBD818T/Q/C/**/~~ 2000mm QBD820T/Q/**/~~ QBD820T/Q/C/**/~~ If not orderng screens wth double-sded bench desks, nsert /N at the end of the core code, before the /**. Ths ndcates that fxed tops should be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 8 X-Range Prce Lst January 2018
SINGLE-SIDED BENCH DESKS SQUARE FRAMES FIXED TOPS Intal Add-on Modesty panel Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels 1000mm QBS610/Q/**/~~ QBS610E/**/~~ QBS610/Q/C/**/~~ QBS610E/C/**/~~ n/a Wre cable trays 1200mm QBS612/Q/**/~~ QBS612E/**/~~ QBS612/Q/C/**/~~ QBS612E/C/**/~~ n/a not ftted or 1400mm QBS614/Q/**/~~ QBS614E/**/~~ QBS614/Q/C/**/~~ QBS614E/C/**/~~ n/a compatble wth 1600mm QBS616/Q/**/~~ QBS616E/**/~~ QBS616/Q/C/**/~~ QBS616E/C/**/~~ n/a sngle-sded 1800mm QBS618/Q/**/~~ QBS618E/**/~~ QBS618/Q/C/**/~~ QBS618E/C/**/~~ n/a 600mm deep 2000mm QBS620/Q/**/~~ QBS620E/**/~~ QBS620/Q/C/**/~~ QBS620E/C/**/~~ n/a fxed tops. FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels *1 1000mm QBS810/Q/**/~~ QBS810E/**/~~ QBS810/Q/C/**/~~ QBS810E/C/**/~~ QMP10/** *1 Modesty panels 1200mm QBS812/Q/**/~~ QBS812E/**/~~ QBS812/Q/C/**/~~ QBS812E/C/**/~~ QMP12/** not compatble 1400mm QBS814/Q/**/~~ QBS814E/**/~~ QBS814/Q/C/**/~~ QBS814E/C/**/~~ QMP14/** wth scalloped 1600mm QBS816/Q/**/~~ QBS816E/**/~~ QBS816/Q/C/**/~~ QBS816E/C/**/~~ QMP16/** tops. Wre cable 1800mm QBS818/Q/**/~~ QBS818E/**/~~ QBS818/Q/C/**/~~ QBS818E/C/**/~~ QMP18/** trays ncluded as 2000mm QBS820/Q/**/~~ QBS820E/**/~~ QBS820/Q/C/**/~~ QBS820E/C/**/~~ QMP20/** standard. Optonal modesty panels are 200mm shorter that the modules they ft (they are nset 100mm from each end). DOUBLE-WAVE TOP OPTION SQUARE FRAMES Rectangular tops on 800mm deep (only) bench desks of 1400mm wdth and larger may be replaced by tops wth a double-wave shape. PEDESTALS AND SCREENS For Pedestals see p.2-3 For Bench Screens see p.21-22 To specfy, add /W to the end of the code, (before the frst / ) + per top (double-sded module = two tops). SIDE EXTENSION SQUARE FRAMES (wth fxed tops only) FIXED RETURN WITH PEDESTAL Unhanded sde extensons. A moble, low moble or narrow moble pedestal may be placed underneath, or a desk heght 600mm deep pedestal placed on the end. Not sutable for use wth tops less than 1400mm wde. Includes one centrally postoned cable port (can be ftted left or rght). Sze (mm) Code Prce 800x600mm QBR/Q/**/~~ (for fxed top bench desks except 600mm sngle-sded) 800x600mm QBR6S/Q/**/~~ (for fxed top 600mm sngle-sded bench desks) 1000x600mm QBR10/Q/**/~~ (for fxed top bench desks except 600mm sngle-sded) 1000x600mm QBR10S/Q/**/~~ (for fxed top 600mm sngle-sded bench desks) Pedestal wth 2 drawers + fle drawer Unhanded Sze (mm) Code Prce 800x600mm QRP3/** 1000x600mm QRP310/** ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power Towers ncluded wth each add-on module. Further Power Towers may be added at ether end of a bench (800mm deep only), for when benches abut a wall and cables route from skrtng. NOT compatble wth 600mm deep sngle-sded bench. QBT/~~ Bench desks wth fxed tops are 735mm hgh. A Central Power Tower s needed for any stand-alone double-sded ntal bench desk and ncluded n the prce. A QBT (see left) s ftted rotated 90 to maxmze leg room, so that t runs n lne wth the desk rather than across t. As standard, Power Towers have a removable panel on one sde. They may be specfed wth removable panels on both sdes. Add /2D to the code + per tower. Avalable as addtonal Power Tower: QBTD/~~ Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 9
DOUBLE-SIDED BENCH DESKS SQUARE FRAMES SLIDING TOPS Intal Add-on Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD610S/Q/**/~~ QBD610SE/**/~~ QBD610S/Q/C/**/~~ QBD610SE/C/**/~~ Wre cable trays ncluded 1200mm QBD612S/Q/**/~~ QBD612SE/**/~~ QBD612S/Q/C/**/~~ QBD612SE/C/**/~~ as standard. 1400mm QBD614S/Q/**/~~ QBD614SE/**/~~ QBD614S/Q/C/**/~~ QBD614SE/C/**/~~ 1600mm QBD616S/Q/**/~~ QBD616SE/**/~~ QBD616S/Q/C/**/~~ QBD616SE/C/**/~~ compatble only wth steel 1800mm QBD618S/Q/**/~~ QBD618SE/**/~~ QBD618S/Q/C/**/~~ QBD618SE/C/**/~~ pedestals or low moble 2000mm QBD620S/Q/**/~~ QBD620SE/**/~~ QBD620S/Q/C/**/~~ QBD620SE/C/**/~~ MFC pedestals (QLP2M). SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD810S/Q/**/~~ QBD810SE/**/~~ QBD810S/Q/C/**/~~ QBD810SE/C/**/~~ Wre cable trays ncluded 1200mm QBD812S/Q/**/~~ QBD812SE/**/~~ QBD812S/Q/C/**/~~ QBD812SE/C/**/~~ as standard. 1400mm QBD814S/Q/**/~~ QBD814SE/**/~~ QBD814S/Q/C/**/~~ QBD814SE/C/**/~~ 1600mm QBD816S/Q/**/~~ QBD816SE/**/~~ QBD816S/Q/C/**/~~ QBD816SE/C/**/~~ 1800mm QBD818S/Q/**/~~ QBD818SE/**/~~ QBD818S/Q/C/**/~~ QBD818SE/C/**/~~ 2000mm QBD820S/Q/**/~~ QBD820SE/**/~~ QBD820S/Q/C/**/~~ QBD820SE/C/**/~~ uif usng a double-sded ntal bench desk as a stand-alone, wthout an add-on module or two sde extensons, also order a Central Power Tower to ensure stablty (the cable tray wll have a cutout to accommodate the Power Tower). Please see lstng below. If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. DOUBLE-SIDED BENCH DESKS SQUARE FRAMES SLIDING TOPS ntal module stand-alone Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD610ST/Q/**/~~ QBD610ST/Q/C/**/~~ Wre cable trays ncluded 1200mm QBD612ST/Q/**/~~ QBD612ST/Q/C/**/~~ as standard. 1400mm QBD614ST/Q/**/~~ QBD614ST/Q/C/**/~~ compatble 1600mm QBD616ST/Q/**/~~ QBD616ST/Q/C/**/~~ only wth steel pedestals or 1800mm QBD618ST/Q/**/~~ QBD618ST/Q/C/**/~~ low moble MFC pedestals 2000mm QBD620ST/Q/**/~~ QBD620ST/Q/C/**/~~ (QLP2M). SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD810ST/Q/**/~~ QBD810ST/Q/C/**/~~ Wre cable trays ncluded 1200mm QBD812ST/Q/**/~~ QBD812ST/Q/C/**/~~ as standard. 1400mm QBD814ST/Q/**/~~ QBD814ST/Q/C/**/~~ 1600mm QBD816ST/Q/**/~~ QBD816ST/Q/C/**/~~ 1800mm QBD818ST/Q/**/~~ QBD818ST/Q/C/**/~~ 2000mm QBD820ST/Q/**/~~ QBD820ST/Q/C/**/~~ If not orderng screens wth double-sded bench desks, nsert /N at the end of the core code, before the /**. Ths ndcates fxed tops should be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 10 X-Range Prce Lst January 2018
SINGLE-SIDED BENCH DESKS SQUARE FRAMES SLIDING TOPS Intal Add-on Modesty panel Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels 1000mm n/a n/a n/a n/a n/a 1200mm n/a n/a n/a n/a n/a 1400mm n/a n/a n/a n/a n/a 1600mm n/a n/a n/a n/a n/a 1800mm n/a n/a n/a n/a n/a 2000mm n/a n/a n/a n/a n/a SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels *1 1000mm QBS810S/Q/**/~~ QBS810SE/**/~~ QBS810S/Q/C/**/~~ QBS810SE/C/**/~~ QMP10/** *1 Modesty 1200mm QBS812S/Q/**/~~ QBS812SE/**/~~ QBS812S/Q/C/**/~~ QBS812SE/C/**/~~ QMP12/** panels not 1400mm QBS814S/Q/**/~~ QBS814SE/**/~~ QBS814S/Q/C/**/~~ QBS814SE/C/**/~~ QMP14/** compatble wth 1600mm QBS816S/Q/**/~~ QBS816SE/**/~~ QBS816S/Q/C/**/~~ QBS816SE/C/**/~~ QMP16/** scalloped tops. 1800mm QBS818S/Q/**/~~ QBS818SE/**/~~ QBS818S/Q/C/**/~~ QBS818SE/C/**/~~ QMP18/** Wre cable trays 2000mm QBS820S/Q/**/~~ QBS820SE/**/~~ QBS820S/Q/C/**/~~ QBS820SE/C/**/~~ QMP20/** ncluded as standard. Optonal modesty panels are 200mm shorter than the modules they ft (they are nset 100mm from each end). A desk-clamp montor arm cannot be ftted to a sngle-sded bench wth a sldng top: the clamp fouls the bench underframe. Please use a through-desk fttng and, to avod drllng the top, order a specal top ftted wth cable ports. DOUBLE-WAVE TOP OPTION SQUARE FRAMES PEDESTALS AND SCREENS For Pedestals see p.2-3 For Bench Screens see p.21-22 Rectangular tops on 800mm deep (only) bench desks of 1400mm wdth and larger may be replaced by tops wth a double-wave shape. To specfy, add /W to the end of the code, (before the frst / ) and + per top (double-sded module = two tops). ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power Towers ncluded wth each add-on module. Further Power Towers may be added at ether end of a bench (800mm deep only), for when benches abut a wall and cables route from skrtng. NOT compatble wth 600mm deep sngle-sded bench. QBT/~~ A Central Power Tower s needed for any stand-alone double-sded ntal bench desk and ncluded n the prce. A QBT (see left) s ftted rotated 90 to maxmze leg room, so that t runs n lne wth the desk rather than across t. As standard, Power Towers have a removable panel on one sde. They may be specfed wth removable panels on both sdes. Add /2D to the code + per tower. Avalable as addtonal Power Tower: QBTD/~~ Bench desks wth sldng tops are 741mm hgh. Rear cable access ndcates that the tops are cut very slghtly short to allow cable access along the whole rear edge of the top. Wth scalloped rear edges the tops are full depth wth cable access va the scallop along the central porton of the desk. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 11
DOUBLE-SIDED BENCH DESKS RECTANGULAR FRAMES FIXED TOPS Intal Add-on Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD610/R/**/~~ QBD610E/**/~~ QBD610/R/C/**/~~ QBD610E/C/**/~~ Wre cable trays ncluded 1200mm QBD612/R/**/~~ QBD612E/**/~~ QBD612/R/C/**/~~ QBD612E/C/**/~~ as standard. 1400mm QBD614/R/**/~~ QBD614E/**/~~ QBD614/R/C/**/~~ QBD614E/C/**/~~ 1600mm QBD616/R/**/~~ QBD616E/**/~~ QBD616/R/C/**/~~ QBD616E/C/**/~~ compatble only wth steel 1800mm QBD618/R/**/~~ QBD618E/**/~~ QBD618/R/C/**/~~ QBD618E/C/**/~~ pedestals or low moble 2000mm QBD620/R/**/~~ QBD620E/**/~~ QBD620/R/C/**/~~ QBD620E/C/**/~~ MFC pedestals (QLP2M). FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD810/R/**/~~ QBD810E/**/~~ QBD810/R/C/**/~~ QBD810E/C/**/~~ Wre cable trays ncluded 1200mm QBD812/R/**/~~ QBD812E/**/~~ QBD812/R/C/**/~~ QBD812E/C/**/~~ as standard. 1400mm QBD814/R/**/~~ QBD814E/**/~~ QBD814/R/C/**/~~ QBD814E/C/**/~~ 1600mm QBD816/R/**/~~ QBD816E/**/~~ QBD816/R/C/**/~~ QBD816E/C/**/~~ 1800mm QBD818/R/**/~~ QBD818E/**/~~ QBD818/R/C/**/~~ QBD818E/C/**/~~ 2000mm QBD820/R/**/~~ QBD820E/**/~~ QBD820/R/C/**/~~ QBD820E/C/**/~~ uif usng a double-sded ntal bench desk as a stand-alone, wthout an add-on module or two sde extensons, also order a Central Power Tower to ensure stablty (the cable tray wll have a cutout to accommodate the Power Tower). Please see lstng below. If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. DOUBLE-SIDED BENCH DESKS RECTANGULAR FRAMES FIXED TOPS ntal module stand-alone If an ntal module has ether an add-on module or two sde extensons attached t does not requre a Central Power Tower for stablty (as t s not consdered stand-alone ). Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD610T/R/**/~~ QBD610T/R/C/**/~~ Wre cable trays ncluded 1200mm QBD612T/R/**/~~ QBD612T/R/C/**/~~ as standard. 1400mm QBD614T/R/**/~~ QBD614T/R/C/**/~~ compatble 1600mm QBD616T/R/**/~~ QBD616T/R/C/**/~~ only wth steel pedestals or 1800mm QBD618T/R/**/~~ QBD618T/R/C/**/~~ low moble MFC pedestals 2000mm QBD620T/R/**/~~ QBD620T/R/C/**/~~ (QLP2M). FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD810T/R/**/~~ QBD810T/R/C/**/~~ Wre cable trays ncluded 1200mm QBD812T/R/**/~~ QBD812T/R/C/**/~~ as standard. 1400mm QBD814T/R/**/~~ QBD814T/R/C/**/~~ 1600mm QBD816T/R/**/~~ QBD816T/R/C/**/~~ 1800mm QBD818T/R/**/~~ QBD818T/R/C/**/~~ 2000mm QBD820T/R/**/~~ QBD820T/R/C/**/~~ If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops should be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 12 X-Range Prce Lst January 2018
SINGLE-SIDED BENCH DESKS RECTANGULAR FRAMES FIXED TOPS Intal Add-on Modesty panel Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels 1000mm QBS610/R/**/~~ QBS610E/**/~~ QBS610/R/C/**/~~ QBS610E/C/**/~~ n/a Wre cable trays not 1200mm QBS612/R/**/~~ QBS612E/**/~~ QBS612/R/C/**/~~ QBS612E/C/**/~~ n/a ftted or compatble 1400mm QBS614/R/**/~~ QBS614E/**/~~ QBS614/R/C/**/~~ QBS614E/C/**/~~ n/a wth sngle-sded 1600mm QBS616/R/**/~~ QBS616E/**/~~ QBS616/R/C/**/~~ QBS616E/C/**/~~ n/a 600mm deep fxed 1800mm QBS618/R/**/~~ QBS618E/**/~~ QBS618/R/C/**/~~ QBS618E/C/**/~~ n/a tops. 2000mm QBS620/R/**/~~ QBS620E/**/~~ QBS620/R/C/**/~~ QBS620E/C/**/~~ n/a FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels *1 1000mm QBS810/R/**/~~ QBS810E/**/~~ QBS810/R/C/**/~~ QBS810E/C/**/~~ QMP10/** *1 Modesty panels 1200mm QBS812/R/**/~~ QBS812E/**/~~ QBS812/R/C/**/~~ QBS812E/C/**/~~ QMP12/** not compatble wth 1400mm QBS814/R/**/~~ QBS814E/**/~~ QBS814/R/C/**/~~ QBS814E/C/**/~~ QMP14/** scalloped tops. Wre 1600mm QBS816/R/**/~~ QBS816E/**/~~ QBS816/R/C/**/~~ QBS816E/C/**/~~ QMP16/** cable trays ncluded 1800mm QBS818/R/**/~~ QBS818E/**/~~ QBS818/R/C/**/~~ QBS818E/C/**/~~ QMP18/** as standard. 2000mm QBS820/R/**/~~ QBS820E/**/~~ QBS820/R/C/**/~~ QBS820E/C/**/~~ QMP20/** Optonal modesty panels are 200mm shorter that the modules they ft (they are nset 100mm from each end). DOUBLE-WAVE TOP OPTION RECTANGULAR FRAMES Rectangular tops on 800mm deep (only) bench desks of 1400mm wdth and larger may be replaced by tops wth a double-wave shape. PEDESTALS AND SCREENS For Pedestals see p.2-3 For Bench Screens see p.21-22 To specfy, add /W to the end of the code, (before the frst / ) + per top (double-sded module = two tops). SIDE EXTENSION RECTANGULAR FRAMES (wth fxed tops only) Unhanded sde extensons. A moble, low moble or narrow moble pedestal may be placed underneath, or a desk heght 600mm deep pedestal placed on the end. Not sutable for use wth tops less than 1400mm wde. Includes one centrally postoned cable port (can be ftted left or rght). FIXED RETURN WITH PEDESTAL Sze (mm) Code Prce 800x600mm QBR/R/**/~~ (for fxed top bench desks except 600mm sngle-sded) 800x600mm QBR6S/R/**/~~ (for fxed top 600mm sngle-sded bench desks) 1000x600mm QBR10/R/**/~~ (for fxed top bench desks except 600mm sngle-sded) 1000x600mm QBR10S/R/**/~~ (for fxed top 600mm sngle-sded bench desks) Pedestal wth 2 drawers + fle drawer Unhanded Sze (mm) Code Prce 800x600mm QRP3/** 1000x600mm QRP310/** ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power Towers ncluded wth each add-on module. Further Power Towers may be added at ether end of a bench (800mm deep only), for when benches abut a wall and cables route from skrtng. NOT compatble wth 600mm deep sngle-sded bench. QBT/~~ Bench desks wth fxed tops are 735mm hgh. A Central Power Tower s needed for any stand-alone double-sded ntal bench desk and ncluded n the prce. A QBT (see left) s ftted rotated 90 to maxmze leg room, so that t runs n lne wth the desk rather than across t. As standard, Power Towers have a removable panel on one sde. They may be specfed wth removable panels on both sdes. Add /2D to the code + per tower. Avalable as addtonal Power Tower: QBTD/~~ Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 13
DOUBLE-SIDED BENCH DESKS RECTANGULAR FRAMES SLIDING TOPS Intal Add-on Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD610S/R/**/~~ QBD610SE/**/~~ QBD610S/R/C/**/~~ QBD610SE/C/**/~~ Wre cable trays ncluded 1200mm QBD612S/R/**/~~ QBD612SE/**/~~ QBD612S/R/C/**/~~ QBD612SE/C/**/~~ as standard. 1400mm QBD614S/R/**/~~ QBD614SE/**/~~ QBD614S/R/C/**/~~ QBD614SE/C/**/~~ 1600mm QBD616S/R/**/~~ QBD616SE/**/~~ QBD616S/R/C/**/~~ QBD616SE/C/**/~~ compatble only wth steel 1800mm QBD618S/R/**/~~ QBD618SE/**/~~ QBD618S/R/C/**/~~ QBD618SE/C/**/~~ pedestals or low moble 2000mm QBD620S/R/**/~~ QBD620SE/**/~~ QBD620S/R/C/**/~~ QBD620SE/C/**/~~ MFC pedestals (QLP2M). SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD810S/R/**/~~ QBD810SE/**/~~ QBD810S/R/C/**/~~ QBD810SE/C/**/~~ Wre cable trays ncluded 1200mm QBD812S/R/**/~~ QBD812SE/**/~~ QBD812S/R/C/**/~~ QBD812SE/C/**/~~ as standard. 1400mm QBD814S/R/**/~~ QBD814SE/**/~~ QBD814S/R/C/**/~~ QBD814SE/C/**/~~ 1600mm QBD816S/R/**/~~ QBD816SE/**/~~ QBD816S/R/C/**/~~ QBD816SE/C/**/~~ 1800mm QBD818S/R/**/~~ QBD818SE/**/~~ QBD818S/R/C/**/~~ QBD818SE/C/**/~~ 2000mm QBD820S/R/**/~~ QBD820SE/**/~~ QBD820S/R/C/**/~~ QBD820SE/C/**/~~ uif usng a double-sded ntal bench desk as a stand-alone, wthout an add-on module or two sde extensons, also order a Central Power Tower to ensure stablty (the cable tray wll have a cutout to accommodate the Power Tower). Please see lstng below. If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. DOUBLE-SIDED BENCH DESKS RECTANGULAR FRAMES SLIDING TOPS ntal module stand-alone Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD610ST/R/**/~~ QBD610ST/R/C/**/~~ Wre cable trays ncluded 1200mm QBD612ST/R/**/~~ QBD612ST/R/C/**/~~ as standard. 1400mm QBD614ST/R/**/~~ QBD614ST/R/C/**/~~ compatble 1600mm QBD616ST/R/**/~~ QBD616ST/R/C/**/~~ only wth steel pedestals or 1800mm QBD618ST/R/**/~~ QBD618ST/R/C/**/~~ low moble MFC pedestals 2000mm QBD620ST/R/**/~~ QBD620ST/R/C/**/~~ (QLP2M). SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD810ST/R/**/~~ QBD810ST/R/C/**/~~ Wre cable trays ncluded 1200mm QBD812ST/R/**/~~ QBD812ST/R/C/**/~~ as standard. 1400mm QBD814ST/R/**/~~ QBD814ST/R/C/**/~~ 1600mm QBD816ST/R/**/~~ QBD816ST/R/C/**/~~ 1800mm QBD818ST/R/**/~~ QBD818ST/R/C/**/~~ 2000mm QBD820ST/R/**/~~ QBD820ST/R/C/**/~~ If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 14 X-Range Prce Lst January 2018
SINGLE-SIDED BENCH DESKS RECTANGULAR FRAMES SLIDING TOPS Intal Add-on Modesty panel Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels 1000mm n/a n/a n/a n/a n/a 1200mm n/a n/a n/a n/a n/a 1400mm n/a n/a n/a n/a n/a 1600mm n/a n/a n/a n/a n/a 1800mm n/a n/a n/a n/a n/a 2000mm n/a n/a n/a n/a n/a SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels *1 1000mm QBS810S/R/**/~~ QBS810SE/**/~~ QBS810S/R/C/**/~~ QBS810SE/C/**/~~ QMP10/** *1 Modesty 1200mm QBS812S/R/**/~~ QBS812SE/**/~~ QBS812S/R/C/**/~~ QBS812SE/C/**/~~ QMP12/** panels not 1400mm QBS814S/R/**/~~ QBS814SE/**/~~ QBS814S/R/C/**/~~ QBS814SE/C/**/~~ QMP14/** compatble wth 1600mm QBS816S/R/**/~~ QBS816SE/**/~~ QBS816S/R/C/**/~~ QBS816SE/C/**/~~ QMP16/** scalloped tops. 1800mm QBS818S/R/**/~~ QBS818SE/**/~~ QBS818S/R/C/**/~~ QBS818SE/C/**/~~ QMP18/** Wre cable trays 2000mm QBS820S/R/**/~~ QBS820SE/**/~~ QBS820S/R/C/**/~~ QBS820SE/C/**/~~ QMP20/** ncluded as standard. Optonal modesty panels are 200mm shorter than the modules they ft (they are nset 100mm from each end). A desk-clamp montor arm cannot be ftted to a sngle-sded bench wth a sldng top: the clamp fouls the bench underframe. Please use a through-desk fttng and, to avod drllng the top, order a specal top ftted wth cable ports. DOUBLE-WAVE TOP OPTION RECTANGULAR FRAMES PEDESTALS AND SCREENS For Pedestals see p.2-3 For Bench Screens see p.21-22 Rectangular tops on 800mm deep (only) bench desks of 1400mm wdth and larger may be replaced by tops wth a double-wave shape. To specfy, add /W to the end of the code, (before the frst / ) + per top (double-sded module = two tops). ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power Towers ncluded wth each add-on module. Further Power Towers may be added at ether end of a bench (800mm deep only), for when benches abut a wall and cables route from skrtng. NOT compatble wth 600mm deep sngle-sded bench. QBT/~~ A Central Power Tower s needed for any stand-alone double-sded ntal bench desk and ncluded n the prce. A QBT (see left) s ftted rotated 90 to maxmze leg room, so that t runs n lne wth the desk rather than across t. As standard, Power Towers have a removable panel on one sde. They may be specfed wth removable panels on both sdes. Add /2D to the code + per tower. Avalable as addtonal Power Tower: QBTD/~~ Bench desks wth sldng tops are 741mm hgh. Rear cable access ndcates that the tops are cut very slghtly short to allow cable access along the whole rear edge of the top. Wth scalloped rear edges the tops are full depth wth cable access va the scallop along the central porton of the desk. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 15
DOUBLE-SIDED BENCH DESKS A-FRAMES FIXED TOPS Intal Add-on Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD610/A/**/~~ QBD610E/**/~~ QBD610/A/C/**/~~ QBD610E/C/**/~~ Wre cable trays ncluded 1200mm QBD612/A/**/~~ QBD612E/**/~~ QBD612/A/C/**/~~ QBD612E/C/**/~~ standard. 1400mm QBD614/A/**/~~ QBD614E/**/~~ QBD614/A/C/**/~~ QBD614E/C/**/~~ 1600mm QBD616/A/**/~~ QBD616E/**/~~ QBD616/A/C/**/~~ QBD616E/C/**/~~ compatble only wth steel 1800mm QBD618/A/**/~~ QBD618E/**/~~ QBD618/A/C/**/~~ QBD618E/C/**/~~ pedestals or low moble 2000mm QBD620/A/**/~~ QBD620E/**/~~ QBD620/A/C/**/~~ QBD620E/C/**/~~ MFC pedestals (QLP2M). FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD810/A/**/~~ QBD810E/**/~~ QBD810/A/C/**/~~ QBD810E/C/**/~~ Wre cable trays ncluded 1200mm QBD812/A/**/~~ QBD812E/**/~~ QBD812/A/C/**/~~ QBD812E/C/**/~~ as standard. 1400mm QBD814/A/**/~~ QBD814E/**/~~ QBD814/A/C/**/~~ QBD814E/C/**/~~ 1600mm QBD816/A/**/~~ QBD816E/**/~~ QBD816/A/C/**/~~ QBD816E/C/**/~~ 1800mm QBD818/A/**/~~ QBD818E/**/~~ QBD818/A/C/**/~~ QBD818E/C/**/~~ 2000mm QBD820/A/**/~~ QBD820E/**/~~ QBD820/A/C/**/~~ QBD820E/C/**/~~ uif usng a double-sded ntal bench desk as a stand-alone, wthout an add-on module or two sde extensons, also order a Central Power Tower to ensure stablty (the cable tray wll have a cutout to accommodate the Power Tower). Please see lstng below. If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. DOUBLE-SIDED BENCH DESKS A-FRAMES FIXED TOPS ntal module stand-alone If an ntal module has ether an add-on module or two sde extensons attached t does not requre a Central Power Tower for stablty (as t s not consdered stand-alone ). Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD610T/A/**/~~ QBD610T/A/C/**/~~ Wre cable trays ncluded 1200mm QBD612T/A/**/~~ QBD612T/A/C/**/~~ as standard. 1400mm QBD614T/A/**/~~ QBD614T/A/C/**/~~ compatble 1600mm QBD616T/A/**/~~ QBD616T/A/C/**/~~ only wth steel pedestals or 1800mm QBD618T/A/**/~~ QBD618T/A/C/**/~~ low moble MFC pedestals 2000mm QBD620T/A/**/~~ QBD620T/A/C/**/~~ (QLP2M). FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD810T/A/**/~~ QBD810T/A/C/**/~~ Wre cable trays ncluded 1200mm QBD812T/A/**/~~ QBD812T/A/C/**/~~ as standard. 1400mm QBD814T/A/**/~~ QBD814T/A/C/**/~~ 1600mm QBD816T/A/**/~~ QBD816T/A/C/**/~~ 1800mm QBD818T/A/**/~~ QBD818T/A/C/**/~~ 2000mm QBD820T/A/**/~~ QBD820T/A/C/**/~~ If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 16 X-Range Prce Lst January 2018
SINGLE-SIDED BENCH DESKS A-FRAMES FIXED TOPS Intal Add-on Modesty panel Bench tops avalable on request n all styles n wdths up to 2400mm: POA FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels 1000mm QBS610/A/**/~~ QBS610E/**/~~ QBS610/A/C/**/~~ QBS610E/C/**/~~ n/a Wre cable trays not 1200mm QBS612/A/**/~~ QBS612E/**/~~ QBS612/A/C/**/~~ QBS612E/C/**/~~ n/a ftted or compatble 1400mm QBS614/A/**/~~ QBS614E/**/~~ QBS614/A/C/**/~~ QBS614E/C/**/~~ n/a wth sngle-sded 1600mm QBS616/A/**/~~ QBS616E/**/~~ QBS616/A/C/**/~~ QBS616E/C/**/~~ n/a 600mm deep fxed 1800mm QBS618/A/**/~~ QBS618E/**/~~ QBS618/A/C/**/~~ QBS618E/C/**/~~ n/a tops. 2000mm QBS620/A/**/~~ QBS620E/**/~~ QBS620/A/C/**/~~ QBS620E/C/**/~~ n/a FIXED TOPS wth Cable Ports FIXED TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels *1 1000mm QBS810/A/**/~~ QBS810E/**/~~ QBS810/A/C/**/~~ QBS810E/C/**/~~ QMP10/** *1 Modesty panels 1200mm QBS812/A/**/~~ QBS812E/**/~~ QBS812/A/C/**/~~ QBS812E/C/**/~~ QMP12/** not compatble wth 1400mm QBS814/A/**/~~ QBS814E/**/~~ QBS814/A/C/**/~~ QBS814E/C/**/~~ QMP14/** scalloped tops. Wre 1600mm QBS816/A/**/~~ QBS816E/**/~~ QBS816/A/C/**/~~ QBS816E/C/**/~~ QMP16/** cable trays ncluded 1800mm QBS818/A/**/~~ QBS818E/**/~~ QBS818/A/C/**/~~ QBS818E/C/**/~~ QMP18/** as standard. 2000mm QBS820/A/**/~~ QBS820E/**/~~ QBS820/A/C/**/~~ QBS820E/C/**/~~ QMP20/** Optonal modesty panels are 200mm shorter than the modules they ft (they are nset 100mm from each end). DOUBLE-WAVE TOP OPTION A-FRAMES Rectangular tops on 800mm deep (only) bench desks of 1400mm wdth and larger may be replaced by tops wth a double-wave shape. PEDESTALS AND SCREENS For Pedestals see p.2-3 For Bench Screens see p.21-22 To specfy, add /W to the end of the code, (before the frst / ) and + per top (double-sded module = two tops). SIDE EXTENSION RECTANGULAR FRAMES (secton matches A-Frame) FIXED RETURN WITH PEDESTAL Unhanded sde extensons. A moble, low moble or narrow moble pedestal may be placed underneath, or a desk heght 600mm deep pedestal placed on the end. Not sutable for use wth tops less than 1400mm wde. Includes one centrally postoned cable port. Fxed tops only (can be ftted left or rght). Sze (mm) Code Prce 800x600mm QBR/R/**/~~ (for fxed top bench desks except 600mm sngle-sded) 800x600mm QBR6S/R/**/~~ (for fxed top 600mm sngle-sded bench desks) 1000x600mm QBR10/R/**/~~ (for fxed top bench desks except 600mm sngle-sded) 1000x600mm QBR10S/R/**/~~ (for fxed top 600mm sngle-sded bench desks) Pedestal wth 2 drawers + fle drawer Unhanded Sze (mm) Code Prce 800x600mm QRP3/** 1000x600mm QRP310/** ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power Towers ncluded wth each add-on module. Further Power Towers may be added at ether end of a bench (800mm deep only), for when benches abut a wall and cables route from skrtng. NOT compatble wth 600mm deep sngle-sded bench. QBT/~~ Bench desks wth fxed tops are 735mm hgh. A Central Power Tower s needed for any stand-alone double-sded ntal bench desk and ncluded n the prce. A QBT (see left) s ftted rotated 90 to maxmze leg room, so that t runs n lne wth the desk rather than across t. As standard, Power Towers have a removable panel on one sde. They may be specfed wth removable panels on both sdes. Add /2D to the code + per tower. Avalable as addtonal Power Tower: QBTD/~~ Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 17
DOUBLE-SIDED BENCH DESKS A-FRAMES SLIDING TOPS Intal Add-on Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD610S/A/**/~~ QBD610SE/**/~~ QBD610S/A/C/**/~~ QBD610SE/C/**/~~ Wre cable trays ncluded 1200mm QBD612S/A/**/~~ QBD612SE/**/~~ QBD612S/A/C/**/~~ QBD612SE/C/**/~~ as standard. 1400mm QBD614S/A/**/~~ QBD614SE/**/~~ QBD614S/A/C/**/~~ QBD614SE/C/**/~~ 1600mm QBD616S/A/**/~~ QBD616SE/**/~~ QBD616S/A/C/**/~~ QBD616SE/C/**/~~ compatble only wth steel 1800mm QBD618S/A/**/~~ QBD618SE/**/~~ QBD618S/A/C/**/~~ QBD618SE/C/**/~~ pedestals or low moble 2000mm QBD620S/A/**/~~ QBD620SE/**/~~ QBD620S/A/C/**/~~ QBD620SE/C/**/~~ MFC pedestals (QLP2M). SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Wdth Intal module u Add-on module Intal module Add-on module 1000mm QBD810S/A/**/~~ QBD810SE/**/~~ QBD810S/A/C/**/~~ QBD810SE/C/**/~~ Wre cable trays ncluded 1200mm QBD812S/A/**/~~ QBD812SE/**/~~ QBD812S/A/C/**/~~ QBD812SE/C/**/~~ as standard. 1400mm QBD814S/A/**/~~ QBD814SE/**/~~ QBD814S/A/C/**/~~ QBD814SE/C/**/~~ 1600mm QBD816S/A/**/~~ QBD816SE/**/~~ QBD816S/A/C/**/~~ QBD816SE/C/**/~~ 1800mm QBD818S/A/**/~~ QBD818SE/**/~~ QBD818S/A/C/**/~~ QBD818SE/C/**/~~ 2000mm QBD820S/A/**/~~ QBD820SE/**/~~ QBD820S/A/C/**/~~ QBD820SE/C/**/~~ uif usng a double-sded ntal bench desk as a stand-alone, wthout an add-on module or two sde extensons, also order a Central Power Tower to ensure stablty (the cable tray wll have a cutout to accommodate the Power Tower). Please see lstng below. If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. DOUBLE-SIDED BENCH DESKS A-FRAMES SLIDING TOPS ntal module stand-alone Bench tops avalable on request n all styles n wdths up to 2400mm POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD610ST/A/**/~~ QBD610ST/A/C/**/~~ Wre cable trays ncluded 1200mm QBD612ST/A/**/~~ QBD612ST/A/C/**/~~ as standard. 1400mm QBD614ST/A/**/~~ QBD614ST/A/C/**/~~ compatble 1600mm QBD616ST/A/**/~~ QBD616ST/A/C/**/~~ only wth steel pedestals or 1800mm QBD618ST/A/**/~~ QBD618ST/A/C/**/~~ low moble MFC pedestals 2000mm QBD620ST/A/**/~~ QBD620ST/A/C/**/~~ (QLP2M). SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Intal module used stand-alone Intal module used stand-alone Wdth ncludes QBT Power tower ncludes QBT Power tower 1000mm QBD810ST/A/**/~~ QBD810ST/A/C/**/~~ Wre cable trays ncluded as 1200mm QBD812ST/A/**/~~ QBD812ST/A/C/**/~~ standard. 1400mm QBD814ST/A/**/~~ QBD814ST/A/C/**/~~ 1600mm QBD816ST/A/**/~~ QBD816ST/A/C/**/~~ 1800mm QBD818ST/A/**/~~ QBD818ST/A/C/**/~~ 2000mm QBD820ST/A/**/~~ QBD820ST/A/C/**/~~ If not orderng screens wth double-sded bench desks, nsert /N at the end of the code, before the /**. Ths ndcates fxed tops to be manufactured slghtly deeper and sldng tops suppled wth a metal nfll, to cover the gap usually occuped by screens. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 18 X-Range Prce Lst January 2018
SINGLE-SIDED BENCH DESKS A-FRAMES SLIDING TOPS Intal Add-on Modesty panel Bench tops avalable on request n all styles n wdths up to 2400mm: POA SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels 1000mm n/a n/a n/a n/a n/a 1200mm n/a n/a n/a n/a n/a 1400mm n/a n/a n/a n/a n/a 1600mm n/a n/a n/a n/a n/a 1800mm n/a n/a n/a n/a n/a 2000mm n/a n/a n/a n/a n/a SLIDING TOPS wth Rear Cable Access SLIDING TOPS wth Scalloped Rear Edges Modesty Wdth Intal module Add-on module Intal module Add-on module panels *1 1000mm QBS810S/A/**/~~ QBS810SE/**/~~ QBS810S/A/C/**/~~ QBS810SE/C/**/~~ QMP10/** *1 Modesty 1200mm QBS812S/A/**/~~ QBS812SE/**/~~ QBS812S/A/C/**/~~ QBS812SE/C/**/~~ QMP12/** panels not 1400mm QBS814S/A/**/~~ QBS814SE/**/~~ QBS814S/A/C/**/~~ QBS814SE/C/**/~~ QMP14/** compatble wth 1600mm QBS816S/A/**/~~ QBS816SE/**/~~ QBS816S/A/C/**/~~ QBS816SE/C/**/~~ QMP16/** scalloped tops. 1800mm QBS818S/A/**/~~ QBS818SE/**/~~ QBS818S/A/C/**/~~ QBS818SE/C/**/~~ QMP18/** Wre cable trays 2000mm QBS820S/A/**/~~ QBS820SE/**/~~ QBS820S/A/C/**/~~ QBS820SE/C/**/~~ QMP20/** ncluded as standard. Optonal modesty panels are 200mm shorter than the modules they ft (they are nset 100mm from each end). A desk-clamp montor arm cannot be ftted to a sngle-sded bench wth a sldng top: the clamp fouls the bench underframe. Please use a through-desk fttng and, to avod drllng the top, order a specal top ftted wth cable ports. DOUBLE-WAVE TOP OPTION A-FRAMES PEDESTALS AND SCREENS For Pedestals see p.2-3 For Bench Screens see p.21-22 Rectangular tops on 800mm deep (only) bench desks of 1400mm wdth and larger may be replaced by tops wth a double-wave shape. To specfy, add /W to the end of the code (before the frst / ) and + per top (double-sded module = two tops). ADDITIONAL CENTRAL DOUBLE-SIDED ACCESS POWER TOWER POWER TOWER POWER TOWER OPTION Power Towers ncluded wth each add-on module. Further Power Towers may be added at ether end of a bench (800mm deep only), for when benches abut a wall and cables route from skrtng. NOT compatble wth 600mm deep sngle-sded bench. QBT/~~ A Central Power Tower s needed for any stand-alone double-sded ntal bench desk and ncluded n the prce. A QBT (see left) s ftted rotated 90 to maxmze leg room, so that t runs n lne wth the desk rather than across t. As standard, Power Towers have a removable panel on one sde. They may be specfed wth removable panels on both sdes. Add /2D to the code + per tower. Avalable as addtonal Power Tower: QBTD/~~ Bench desks wth sldng tops are 741mm hgh. Rear cable access ndcates that the tops are cut very slghtly short to allow cable access along the whole rear edge of the top. Wth scalloped rear edges the tops are full depth wth cable access va the scallop along the central porton of the desk. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 19
BENCH INITIAL AND ADD-ON MODULES EXPLAINED Bench ntal module. To extend ntal module, remove one set of legs. Insert an add-on module. Multple add-on modules can be nserted n one run of bench desks. Reattach legs from ntal module to the end of add-on module. 20 X-Range Prce Lst January 2018
HEIGHT ADJUSTMENT KITS FOR BENCH DESKS (fxed tops only) Indvdual tops may be rased by the use of a spacer kt n a choce of heghts (ftted on nstallaton or retroftted). In addton, for cosmetc reasons plastc caps are needed to cover the open tops of any legs exposed by rasng the top. Dagram (rght) llustrates the number of caps needed dependng on the locaton of the top beng rased. Note: the underframe s not rased. To rase two adjacent tops please contact us for advce. Number of caps requred accordng to the locaton of the top wthn a bench 4 2 2 2 0 2 2 2 1 1 1 1 1 1 0 0 1 1 25mm spacer kt QH25 30mm spacer kt QH30 35mm spacer kt QH35 40mm spacer kt QH40 Leg caps (each) Standard frames QCAP Rectangular frames QCAPR Square frames QCAPQ QSPA SCREENS FOR BENCH DESKS AND GP DESKS UPHOLSTERED (brackets ncluded) If orderng double-sded bench desks wthout screens add /N opton to the bench code at the end of the code (before the /**). Note: Sngle-sded bench desks wth sldng tops cannot be ftted wth screens as they would block the routng of cables. Floor-standng screens should be used f screens are requred n ths stuaton. 340mm Upholstered plan frame hgh Replace: ~~ wth frame colour + wth fabrc Wdth For sngle-sded For double-sded Grp1 Grp2 Pnnable (wth fxed tops only) 1000mm QS10034SS/~~/+ QS10034SD/~~/+ + 1200mm QS12034SS/~~/+ QS12034SD/~~/+ + 1400mm QS14034SS/~~/+ QS14034SD/~~/+ + 1600mm QS16034SS/~~/+ QS16034SD/~~/+ + 1800mm* QS18034SS/~~/+ QS18034SD/~~/+ + 2000mm* QS20034SS/~~/+ QS20034SD/~~/+ + Double-sded bracket The SD (double-sded) bracket s for bench only, f you are placng GP desks back-to-back please order screens wth SS (sngle-sded) brackets. 340mm Upholstered wth accessory bar hgh Replace: ~~ wth frame colour + wth fabrc Wdth For sngle-sded For double-sded Grp1 Grp2 Pnnable (wth fxed tops only) 1000mm QS10034SS/~~/+/AB QS10034SD/~~/+/AB + 1200mm QS12034SS/~~/+/AB QS12034SD/~~/+/AB + 1400mm QS14034SS/~~/+/AB QS14034SD/~~/+/AB + 1600mm QS16034SS/~~/+/AB QS16034SD/~~/+/AB + 1800mm* QS18034SS/~~/+/AB QS18034SD/~~/+/AB + 2000mm* QS20034SS/~~/+/AB QS20034SD/~~/+/AB + 465mm Upholstered plan frame hgh Replace: ~~ wth frame colour + wth fabrc Wdth For sngle-sded For double-sded Grp1 Grp2 Pnnable (wth fxed tops only) 1000mm QS10046SS/~~/+ QS10046SD/~~/+ + 1200mm QS12046SS/~~/+ QS12046SD/~~/+ + 1400mm QS14046SS/~~/+ QS14046SD/~~/+ + 1600mm QS16046SS/~~/+ QS16046SD/~~/+ + 1800mm* QS18046SS/~~/+ QS18046SD/~~/+ + 2000mm* QS20046SS/~~/+ QS20046SD/~~/+ + 505mm Upholstered plan frame hgh Replace: ~~ wth frame colour + wth fabrc Wdth For sngle-sded For double-sded Grp1 Grp2 Pnnable (wth fxed tops only) 1000mm QS10050SS/~~/+ QS10050SD/~~/+ + 1200mm QS12050SS/~~/+ QS12050SD/~~/+ + 1400mm QS14050SS/~~/+ QS14050SD/~~/+ + 1600mm QS16050SS/~~/+ QS16050SD/~~/+ + 1800mm* QS18050SS/~~/+ QS18050SD/~~/+ + 2000mm* QS20050SS/~~/+ QS20050SD/~~/+ + *Cauton: fabrc runs vertcally on all screens except those 1800mm and wder, where fabrc wdth lmtatons mean fabrc must run horzontally: beware possble pattern msmatch. Replace + wth fabrc colour code (fabrc colour codes lsted on our screen fabrc swatch cards). Screen fabrcs: Group 1: Camra Cara, Carlow Group 2: Camra Blazer Lte, Era 170, L2, Luca, Nexus, Racer, Sonus To specfy pnnable add /PN to the code. Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH X-Range Prce Lst January 2018 21
QSPA SCREENS FOR BENCH DESKS AND GP DESKS ACRYLIC (brackets ncluded) 340mm ACRYLIC plan frame hghreplace: ~~ wth frame colour Replace ** wth fnsh: CG=Clear PC=Clear Frosted Wdth For sngle sded benches For double sded benches Acrylc 1000mm QS10034GS/~~/** QS10034GD/~~/** 1200mm QS12034GS/~~/** QS12034GD/~~/** 1400mm QS14034GS/~~/** QS14034GD/~~/** 1431mm QS14334GS/~~/** QS14334GD/~~/** 1600mm QS16034GS/~~/** QS16034GD/~~/** 1800mm QS18034GS/~~/** QS18034GD/~~/** 2000mm QS20034GS/~~/** QS20034GD/~~/ ** Matchng floor-standng screens avalable from our SPA screen range: for detals, see man Sven Prce Lst Avalablty and prces on request: Screens wth slatwall Screens from our ALU range to ft X-Range Bench. TRANSVERSE SCREENS FOR BENCH DESKS (brackets ncluded) 340mm Upholstered plan frame hgh Replace: ~~ wth frame colour + wth fabrc Wth fxed tops Wth sldng tops Wdth For sngle-sded benches For double sded benches Grp1 Grp2 For sngle-sded benches For double-sded benches Grp1 Grp2 Pnnable 600mm QST60034JS/~~/+ QST60034JD/~~/+ n/a QST60034SB/~~/+ + QST60034ES/~~/+ QST60034ED/~~/+ 800mm QST80034JS/~~/+ QST80034JD/~~/+ n/a QSTS80034SB/~~/+ + QST80034ES/~~/+ QST80034ED/~~/+ 465mm Upholstered plan frame hgh Replace: ~~ wth frame colour + wth fabrc Wth fxed tops Wth sldng tops Wdth For sngle-sded benches For double-sded benches Grp1 Grp2 For sngle-sded benches For double-sded benches Grp1 Grp2 Pnnable 600mm QST60046JS/~~/+ QST60046JD/~~/+ n/a QST60046SB/~~/+ + QST60046ES/~~/+ QST60046ED/~~/+ 800mm QST80046JS/~~/+ QST80046JD/~~/+ n/a QST80046SB/~~/+ + QST80046ES/~~/+ QST80046ED/~~/+ To ft over the jon of two tops (attaches at the rear between two screens wth dumbbell strp and at the front wth a clamp) To ft at the end of a bench (attaches nto the edge of the top wth screws) To ft anywhere except drectly over the jon of two tops or at the end of a bench (attaches at the rear wth screws and at the front wth a clamp). END INFILL PANEL FOR BENCH DESKS We can supply benches wth end nfll panels, as llustrated. These requre specal frames ftted wth brackets on whch to mount the panel and are avalable to specal order on an extended delvery: POA. CABLE TRAYS FOR BENCHES Sngle-sded Double-sded Double-sded, wth Power Tower cutout on stand-alone benches. Cable trays ncluded wth bench desks: mages above for nformaton only. Replace + wth fabrc colour code (fabrc colour codes lsted on our screen fabrc swatch cards). Screen fabrcs: Group 1: Camra Cara, Carlow Group 2: Camra Blazer Lte, Era 170, L2, Luca, Nexus, Racer, Sonus To specfy pnnable add /PN to the code. Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH 22 X-Range Prce Lst January 2018
ELECTRICAL FITTINGS Power and USB chargng port (may be retroftted to desks) Comprsng flush-fttng port provdng a standard power socket and double smart USB chargng ports. The USB sockets comply wth v1.2 of the USB Chargng Specfcaton and are Apple complant. Suppled separately as a replacement for a standard plastc desk cable port (smple self-fttng wthout tools). Suppled wth 0.3m fly lead wth Weland male connector: please also order power supply lead of the requred length see below. Supply only (to replace exstng cable port) Whte QYCPS12WH Black QYCPS12BK Grey QYCPS12GR We recommend use of pre-made leads wth moulded Weland plugs: pre-made leads of any length can be suppled. Note: Weland connectors are used to feed power to blocks and lnk between them: a Weland n socket s male and connects to a female connector and vce versa. The Weland out sockets are at the ends of the QYS1R and QYS3R and n the face of the QYS6R. All Weland plugs and sockets are to GST18 standard. Socket blocks to ft nsde cable trays Weland n / Power socket / Twn swtches & twn fuses / Power socket / Weland out QYS1R Weland n / Power socket+fuse x 3 / Weland out QYS3R Weland n / 4 x Power socket+fuse Weland out QYS4RNS Weland n / Power socket+fuse+swtch / Power socket +fuse+swtch / Weland out / Twn data QYS6R Notes: QYS4RNS and QYS6R each have two power sockets n a North/South orentaton and sutable for use n double benches and all conference table cable trays, but less suted to use n freestandng desks, sngle benches or ALU screens. due to the smaller dmensons of the cable trays. Two or more QYS1R, QYS3R and QYS4RNS socket blocks clp together to form a sngle block wthout requrng connectng leads. Power Supply Leads Power Connector Leads Plugs 13 Amp plug to female Weland 2m supply lead QYTF2 Weland male to female 0.5m connector lead QYTMF0.5 2m connector lead QYTMF2 Weland female self-ft plug QYEFSFP 3m supply lead QYTF3 1m connector lead QYTMF1 3m connector lead QYTMF3 Weland male self-ft plug QYEMSFP 4m supply lead QYTF4 1.5m connector lead QYTMF1.5 4m connector lead QYTMF4 Weland male blankng plug QYEMBP Wreless chargng for XRMHT Table: suppled wth a 1.9m lead ftted USB Type A plug. Requres a separate charger. Black QAIR4/BK/WC Whte QAIR4/WH/WC Wreless USB plug charger (output 5.0V 2.0A) QAIR6C X-Range Prce Lst January 2018 23
ELECTRICAL FITTINGS Desktop Socket Modules Socket modules suppled wth brackets for fttng to the rear of any X-Range bench or GP desk top. Every power socket ndvdually fused wth an llumnated power swtch. Data sockets RJ45 Cat5E as standard. Cat6, Cat6a and blank housngs for self-ft sockets avalable on request: POA. If requestng a Cat6 varant, please specfy Cat6 shelded, Cat6 unshelded, Cat6a shelded or Cat6a unshelded. Data sockets suppled wth 2m fly lead: please separately order power supply leads of the length requred (see above left). We lst the most popular socket combnatons but can supply any socket confguraton. Two power Black QYDS2P/SB Whte QYDS2P/SW Two power+two data Black QYDS2P2D/SB Whte QYDS2P2D/SW Four power Black QYDS4P/SB Whte QYDS4P/SW Four power+two data Black QYDS4P2D/SB Whte QYDS4P2D/SW Please note extended delvery usually fve weeks on the QYD varants below Plus HDMI socket and 2m HDMI fly lead: Two power+hdmi Black QYDS2PH/SB Whte QYDS2PH/SW Two power+two data+hdmi Black QYDS2P2DH/SB Whte QYDS2P2DH/SW Four power+hdmi Black QYDS4PH/SB Whte QYDS4PH/SW Four power+two data+hdmi Black QYDS4P2DH/SB Whte QYDS4P2DH/SW Plus double smart USB chargng ports: Two power+2xusb Black QYDS2PU/SB Whte QYDS2PU/SW Two power+two data+2xusb Black QYDS2P2DU/SB Whte QYDS2P2DU/SW Four power+2xusb Black QYDS4PU/SB Whte QYDS4PU/SW Four power+two data+2xusb Black QYDS4P2DU/SB Whte QYDS4P2DU/SW Plus HDMI socket and 2m HDMI fly lead and double smart USB chargng ports: Two power+hdmi+2xusb Two power+two data+hdmi+2xusb Black QYDS2PHU/SB Black QYDS2P2DHU/SB Whte QYDS2PHU/SW Whte QYDS2P2DHU/SW Four power+hdmi+2xusb Black QYDS4PHU/SB Whte QYDS4PHU/SW Four power+two data+hdmi+2xusb Black QYDS4P2DHU/SB Whte QYDS4P2DHU/SW All fused sockets suppled ftted wth 3.15 Amp fuses. 5 Amp fuses may be used f no more than four sockets are fed from one 13 Amp plug. Applances requrng more than 5 Amps should be wred ndvdually. All nstallaton work should be carred out by a qualfed electrcan. MEETING TABLES 800x800x735mm QT8/**/~~ 1200x800x735mm QT12/**/~~ 1600x800x735mm QT16/**/~~ 1800x800x735mm QT18/**/~~ 800mm dameter QTD8/**/~~ 1000mm dameter QTD10/**/~~ 1200mm dameter QTD12/**/~~ 1200mm dameter QTD12/**/AB 800mm dameter QTXD8/**/~~ 1000mm dameter QTXD10/**/~~ 1200mm dameter QTXD12/**/~~ Cable Access Ports (for crcular tables on crucform bases only) One central port: add /AC to the table code + Cable access posts are Whte wth Whte tops, Black wth Black tops, otherwse Slate. For flexble cable spnes, see p.25. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 24 X-Range Prce Lst January 2018
CONFERENCE TABLES Rectangular Bow-end Barrel Sze (mm) No. of peces Rectangular top Bow-end top Barrel top 2000 x 1000 1 QT200R/**/~~ n/a n/a 2000 x 1200 1 QT202R/**/~~ n/a n/a 2500 x 1000 1 QT250R/**/~~ QT250W/**/~~ QT250B/**/~~ 2500 x 1200 1 QT252R/**/~~ QT252W/**/~~ QT252B/**/~~ 3000 x 1200 1 QT302R/**/~~ QT302W/**/~~ QT302B/**/~~ 3500 x 1200 2 QT352R/**/~~ QT352W/**/~~ QT352B/**/~~ 4000 x 1200 2 QT402R/**/~~ QT402W/**/~~ QT402B/**/~~ 4500 x 1200 2 QT452R/**/~~ QT452W/**/~~ QT452B/**/~~ 5000 x 1200 2 QT502R/**/~~ QT502W/**/~~ QT502B/**/~~ Rectangular Bow-end Barrel Sze (mm) No. of peces Rectangular top Bow-end top Barrel top 2000 x 1000 1 QTX200R/**/~~ n/a n/a 2000 x 1200 1 QTX202R/**/~~ n/a n/a 2500 x 1000 1 QTX250R/**/~~ QTX250W/**/~~ QTX250B/**/~~ 2500 x 1200 1 QTX252R/**/~~ QTX252W/**/~~ QTX252B/**/~~ 3000 x 1200 1 QTX302R/**/~~ QTX302W/**/~~ QTX302B/**/~~ 3500 x 1200 2 QTX352R/**/~~ QTX352W/**/~~ QTX352B/**/~~ 4000 x 1200 2 QTX402R/**/~~ QTX402W/**/~~ QTX402B/**/~~ 4500 x 1200 2 QTX452R/**/~~ QTX452W/**/~~ QTX452B/**/~~ 5000 x 1200 2 QTX502R/**/~~ QTX502W/**/~~ QTX502B/**/~~ Important note: gran matchng on tables Woodgran on table tops runs lengthways on one-pece tables and sde-to-sde on two pece tables except on tables 4500 and 5000mm long, where for techncal reasons the gran must run lengthways. There s nevtably an unpredctable degree of msmatch between the gran on adjacent sectons of two-pece tables n MFC, whch s more notceable on darker or heavly graned fnshes such as Natural Walnut and Natural Oak, and more apparent on tables over 4000mm because end-to-end gran msmatch s more obvous than sde-to-sde. We recommend makng customers aware of these lmtatons especally wth Natural Walnut MFC or Natural Oak MFC on 4500 and 5000mm tables. CABLE MANAGEMENT FOR CONFERENCE TABLES CABLE ACCESS PORTS One port centred at each end of the table: on leg frame tables, nset by 500mm on rectangular and barrel tops, and 1000mm on bow-end tops. on crucform base tables postoned over the central column at each end. Add /AC to the table code + Cable Access Ports are Black on Black tops, Whte wth Whte tops, otherwse Slate. CABLE TRAYS (for leg bases only not QTX) Sze Rectangular (mm) and Barrel tops Bow-end 2500 QCT25 QCT25B 3000 QCT30 QCT30B 3500 QCT35 QCT35B 4000 QCT40 QCT40B 4500 QCT45 QCT45B 5000 QCT50 QCT50B Cable trays run up to the central (thrd) leg at each end of the table. Not compatble wth crucform bases /QTX tables. Extendable cable spne Black QSLK/BK Slver QSLK/SA Whte QSLK/WH Flexble cable spne Black QFTS/BK Slver QFTS/SA Whte QFTS/WH Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 25
CONFERENCE TABLE SEATING GUIDELINES Rectangular 2000x 1000mm 2500x 1000mm 6 8 2000x 1200mm 2500x 1200mm 3000x 1200mm 3500x 1200mm 6 8 10 12 Barrel 2500x 1000mm 2500x 1200mm 3000x 1200mm 3500x 1200mm 8 8 10 12 Bow-end 2500x 1000mm 2500x 1200mm 3000x 1200mm 3500x 1200mm 8 8 10 12 Rectangular 4000x1200mm 4500x1200mm 5000x1200mm 12 14 16 Barrel 4000x1200mm 4500x1200mm 5000x1200mm 12 14 16 Bow-end 4000x1200mm 4500x1200mm 5000x1200mm 12 14 16 These seatng capacty llustratons provde an ntal gude. Please make calculatons based on the actual char dmensons beng used and the amount of space to be provded for each person. Tables up to and ncludng 3000mm long have a one-pece top: tables 3500mm to 5000mm nclusve have two pece tops. Please ensure adequate buldng access before orderng. 26 X-Range Prce Lst January 2018
GP RECTANGULAR DESKS GP desks feature the same dstnctve D-secton leg as standard X-Range Bench desk frame and may be ftted wth the same desk-mounted screens as X-Range Bench desks (sngle-sded): see p.21-22. GP RECTANGULAR DESKS Sze (mm) Code Prce Cable Tray 1400x800 QGD14/**/M~~ QGCT12S 1600x800 QGD16/**/M~~ QGCT14S 1800x800 QGD18/**/M~~ QGCT16S GP COMPACT CORNER DESKS Sze (mm) Code Prce Cable Tray Front Sde 1600x1000x800/600 QGCC16L(R)/**/M~~ QGCT14S QGCT8S 1800x1000x800/600 QGCC18L(R)/**/M~~ QGCT16S QGCT8S L left handed GP FIXED RETURNS R rght handed RETURNS WITH THREE DRAWER PEDESTAL Sze (mm) Code 800x600 QGR/**/M~~ 1000x600 QGR10/**/M~~ GP MODESTY PANELS (optonal) Prce Fxed returns are unhanded and cannot be ftted wth modesty panels. Pedestal wth 2 drawers + fle drawer. Sze (mm) Code Prce 800x600 QRP3/** 1000x600 QRP310/** Not avalable n E combnaton fnshes. CONFERENCE EXTENSIONS Sze (mm) Code Prce 800 (sde) QGMP8/** 1000 (compact corner sde) QGMP10/** 1400 QGMP14/** 1600 QGMP16/** 1800 QGMP18/** Sze (mm) Code Prce 1300mm dam Fts 800mm end of desk QCE13/**/~~ 1600x470 For desks placed back-to-back QCE160/**/~~ For desks separated by a QLS freestandng or desk-mounted screen QCE164/**/~~ 1640x470 QCE13 and QCE160 are unhanded and may also be ftted to sngle and double-sded bench desks respectvely. PEDESTALS MFC (common to all X-Range desks) Desk heght x 600mm deep Desk heght x 800mm deep Moble Low Moble Narrow Moble Pentray 2 small drawers 1 flng drawer 431x600x735mm QEP3/** 2 small drawers 1 flng drawer 431x800x735mm QDDP3/** 2 small drawers 1 flng drawer 431x600x645mm QFP3M/** 1 small drawer 1 flng drawer 431x600x490mm QLP2M/** 2 small drawers 1 flng drawer 320x600x645mm QNP3M/** Fts top drawer of any pedestal, except narrow pedestals 356x238x28 QPEN Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Add suffx E for the selected fnsh on the drawer/door fronts and all other panels (ncludng the top) n Whte. Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 27
FREESTANDING DESK PANEL AND FRAME OPTIONS EXPLAINED X-Range desks, workstatons and returns are avalable ether on tmber panel ends, or two styles of metal frame. The B-pattern frame has twn uprghts formed from rectangular secton tube. A cable rser (n Slate only) may be added between the uprghts as an optonal extra. The M-pattern frame has a sngle wde uprght formed from a radused (rounded) secton, and ncorporates a cable management rser (n Slate) as standard, concealed on the nsde of the uprght. Both frame styles avalable n Slate, Slva or Whte. The metal corner leg on metal frame desks matches the frame colour specfed: on panel end corner desks and 120 workstatons the corner leg s fnshed n slate by default. All X-Range cable management accessble from the user sde of the desk. Ths ensures that cables reman accessble even where desks placed back-to-back, or aganst walls or screens. See p.31 for cable management accessores. Panel B-pattern frame M-pattern frame Cable access ports are Whte wth whte tops, Black wth Black, otherwse always n Slate. All desks and returns are 735mm hgh. RECTANGULAR DESKS wth panel ends Sze (mm) Code Prce 800x800 QD8/** 1000x800 QD10/** 1200x800 QD12/** 1400x800 QD14/** 1600x800 QD16/** 1800x800 QD18/** wth metal frames Sze (mm) Code B-frame Prce Code M-frame Prce 800x800 QD8/**/B~~ QD8/**/M~~ 1000x800 QD10/**/B~~ QD10/**/M~~ 1200x800 QD12/**/B~~ QD12/**/M~~ 1400x800 QD14/**/B~~ QD14/**/M~~ 1600x800 QD16/**/B~~ QD16/**/M~~ 1800x800 QD18/**/B~~ QD18/**/M~~ WAVE DESKS wth panel ends L left handed R rght handed Sze (mm) Code left-handed Code rght-handed 1400x800/1000 QW14L/** QW14R/** 1600x800/1000 QW16L/** QW16R/** 1800x800/1000 QW18L/** QW18R/** Prce wth metal frames L left handed R rght handed Sze (mm) Code B-frame Prce Code M-frame Prce 1400x800/1000 QW14L(R)/**/B~~ QW14L(R)/**/M~~ 1600x800/1000 QW16L(R)/**/B~~ QW16L(R)/**/M~~ 1800x800/1000 QW18L(R)/**/B~~ QW18L(R)/**/M~~ DOUBLE-WAVE DESKS wth panel ends Sze (mm) Code Prce 1600x1000/800/1000 QWD16/** 1800x1000/800/1000 QWD18/** wth metal frames Sze (mm) Code B-frame Prce Code M-frame Prce 1600x1000/800/1000 QWD16/**/B~~ QWD16/**/M~~ 1800x1000/800/1000 QWD18/**/B~~ QWD18/**/M~~ Metal frame codes: B~~ = rectangular tube frame wth twn uprghts M~~ = radused tube frame wth ntegral wre management Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 28 X-Range Prce Lst January 2018
COMPACT WAVE DESKS AND COMPACT WAVE WORKSTATIONS GUIDANCE NOTES: Space-savng Compact Wave Desks and Compact Wave Workstatons Standard Wave Desks have a mnmum depth of 800mm and a maxmum of 1000mm. Compact Wave Desks, Compact Double-Wave desks and Compact Wave Workstatons (wth ntegral pedestal) are 200mm shallower, wth a mnmum depth of 600mm and a maxmum of 800mm. Ths stll provdes adequate depth to work wth a flat screen montor (up to 20 ) postoned towards the rear of the wave secton whlst offerng a sgnfcant reducton n plannng footprnt. Compact Wave Desks are 1200mm wde and desgned for use wth ether a narrow moble pedestal under the desk (leavng an 800mm kneehole), or a desk-heght pedestal 800mm or 600mm deep to ether sde of the desk. Compact Wave Workstatons are avalable n wdths of 1200mm, 1400mm and 1600mm. The 1200mm workstatons ncorporate a narrow three-drawer pedestal: the 1400mm and 1600mm workstatons ncorporate a standard wdth three-drawer pedestal. Compact Double-Wave Desks are avalable n wdths of 1400mm and 1600mm and desgned for use wth ether standard moble pedestals or narrow moble pedestals. COMPACT WAVE DESKS wth panel ends L left handed R rght handed Code Code Sze (mm) left-handed rght-handed 1200x800/600 QWR12L/** QWR12R/** Prce wth metal frames Sze (mm) Code B-frame Prce Code M-frame Prce 1200x800/600 QWR12L(R)/**/B~~ QWR12L(R)/**/M~~ L left handed R rght handed COMPACT WAVE WORKSTATIONS WITH INTEGRAL PEDESTAL wth panel ends L left handed R rght handed Sze (mm) Code left-handed Code rght-handed 1200x800/600 QWW12L/** QWW12R/** 1400x800/600 QWW14L/** QWW14R/** 1600x800/600 QWW16L/** QWW16R/** Prce wth metal frames L left handed R rght handed Sze (mm) Code B-frame Prce Code M-frame Prce 1200x800/600 QWW12L(R)/**/B~~ QWW12L(R)/**/M~~ 1400x800/600 QWW14L(R)/**/B~~ QWW14L(R)/**/M~~ 1600x800/600 QWW16L(R)/**/B~~ QWW16L(R)/**/M~~ Pedestal, Drawer and Accessores 1200mm workstatons have an ntegral narrow (320mm wde) pedestal. 1400mm and 1600mm workstatons have an ntegral standard (431mm wde) pedestal. QPEN Pentray Fts top drawer of standard pedestals (does not ft narrow pedestals). COMPACT DOUBLE-WAVE DESKS wth panel ends Sze (mm) Code Prce 1400x800/600/800 QWCD14/** 1600x800/600/800 QWCD16/** wth metal frames Sze (mm) Code B-frame Prce Code M-frame Prce 1400x800/600/800 QWCD14/**/B~~ QWCD14/**/M~~ 1600x800/600/800 QWCD16/**/B~~ QWCD16/**/M~~ Metal frame codes: B~~ = rectangular tube frame wth twn uprghts M~~ = radused tube frame wth ntegral wre management Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Add suffx W for tops n the selected fnsh and all other panels n Whte Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 29
CORNER DESK OPTIONS EXPLAINED We offer both Corner Desks and Compact Corner Desks. Our Compact Corner Desks are 200mm shallower whch results n a useful reducton n plannng footprnt and ntended for use wth flat montor screens. Corner Desks and Compact Corner Desks come n standard and Smple varants. Standard Corner Desks have a panel (or frame) at one end, wth a corner leg and further panel or frame supportng the other end. On Smple Corner Desks the corner leg and second panel/frame are replaced by a sngle panel/frame. Ths smplfed constructon results n cost savngs that are reflected n lower prces. Corner Desks Smple Corner Desks CORNER DESKS wth panel ends L left handed R rght handed Sze (mm) Code left-handed Code rght-handed 1400x1200x800/600 QC14L/** QC14R/** 1600x1200x800/600 QC16L/** QC16R/** 1800x1200x800/600 QC18L/** QC18R/** Prce wth metal frames L left handed R rght handed Sze (mm) Code B-frame Prce Code M-frame Prce 1400x1200x800/600 QC14L(R)/**/B~~ QC14L(R)/**/M~~ 1600x1200x800/600 QC16L(R)/**/B~~ QC16L(R)/**/M~~ 1800x1200x800/600 QC18L(R)/**/B~~ QC18L(R)/**/M~~ SIMPLE CORNER DESKS L left handed R rght handed L left handed R rght handed wth panel ends Sze (mm) Code left-handed Code rght-handed 1400x1200x800/600 QCS14L/** QCS14R/** 1600x1200x800/600 QCS16L/** QCS16R/** 1800x1200x800/600 QCS18L/** QCS18R/** wth metal frames Prce Sze (mm) Code B-frame Prce Code M-frame Prce 1400x1200x800/600 QCS14L(R)/**/B~~ QCS14L(R)/**/M~~ 1600x1200x800/600 QCS16L(R)/**/B~~ QCS16L(R)/**/M~~ 1800x1200x800/600 QCS18L(R)/**/B~~ QCS18L(R)/**/M~~ COMPACT CORNER DESKS L left handed L left handed R rght handed R rght handed wth panel ends Sze (mm) Code left-handed Code rght-handed Prce 1600x1000x800/600 QCC16L/** QCC16R/** 1800x1000x800/600 QCC18L/** QCC18R/** wth metal frames Sze (mm) Code B-frame Prce Code M-frame Prce 1600x1000x800/600 QCC16L(R)/**/B~~ QCC16L(R)/**/M~~ 1800x1000x800/600 QCC18L(R)/**/B~~ QCC18L(R)/**/M~~ SIMPLE COMPACT CORNER DESKS L left handed L left handed R rght handed R rght handed wth panel ends Sze (mm) 1600x1000x800/600 1800x1000x800/600 wth metal frames Code Code left-handed rght-handed QCCS16L/** QCCS16R/** QCCS18L/** QCCS18R/** Prce Sze (mm) Code B-frame Prce Code M-frame Prce 1600x1000x800/600 QCCS16L(R)/**/B~~ QCCS16L(R)/**/M~~ 1800x1000x800/600 QCCS18L(R)/**/B~~ QCCS18L(R)/**/M~~ Metal frame codes: B~~ = rectangular tube frame wth twn uprghts M~~ = radused tube frame wth ntegral wre management Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Add suffx W for tops n the selected fnsh and all other panels n Whte Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] 30 X-Range Prce Lst January 2018
120 WORKSTATION wth panel ends Sze (mm) Code Prce 1000x1000x800 QC120/** wth metal frames Sze (mm) Code B-frame Prce Code M-frame Prce 1000x1000x800 QC120/**/B~~ QC120/**/M~~ FREESTANDING RETURNS wth panel ends wth panel ends Sze (mm) Code Prce 800x600 QR/** 1000x600 QR10/** L left-handed R rght-handed left-handed rghthanded Sze (mm) Code Prce 1000x600/800 QWRL/** QWRR/** wth metal frames Sze (mm) Code B-frame Prce Code M-frame Prce 800x600 QR/**/B~~ QR/**/M~~ 1000x600 QR10/**/B~~ QR10/**/M~~ wth metal frames Sze (mm) Code B-frame Prce Code M-frame Prce 1000x600/800 QWRL(R)/**/B~~ QWRL(R)/**/M~~ L left-handed R rght-handed FIXED RETURNS WITH THREE DRAWER PEDESTAL (unhanded) Pedestal wth 2 drawers + fle drawer Sze (mm) Code Prce 800x600 QRP3/** 1000x600 QRP310/** To ft rectangular desks, Smple Corner desks and Smple Compact Corner desks only. These returns may also be used wth X-Range Bench wth fxed tops only. CONFERENCE EXTENSIONS Sze (mm) Code Prce 1300mm dam Fts 800mm end of desk QCE13/**/~~ 1600x470 For desks placed back to back QCE160/**/~~ 1640x470 For desks separated by a QLS freestandng or desk-mounted screen QCE164/**/~~ QCE13 and QCE160 may also be ftted to sngle and double-sded bench desks respectvely. CABLE MANAGEMENT ACCESSORIES FOR DESKS Cable trays to ft to nsde of modesty panel Cable rser to ft any B~~ frame. Sold ndvdually. (M~~ frames ncorporate and ntegral cable rser) Slate QCR/SL Znc QCR/ZN Whte QCR/WH To ft QD8, QD8F, QR, QWW12, QWW14: QX8 To ft QD10, QD10F, QWW16, QWRL/R, QR10, QC120: QX10 To ft QD12, QD12F: QX12 To ft QD14, QD14F, QW14L/R, QC14L/R, QCC14L/R, QCS14L/R, QCCS14L/R: QX14 To ft QD16, QD16F, QW16L/R, QWD16, QCCS16L/R front, QCS16L/R front, QCC16L/R front, QC16L/R front: QX16 To ft QD18, QD18F, QW18L/R, QWD18, QCCS18L/R front, QCS18L/R front, QCC18L/R front, QC18L/R front: QX18 To ft QC14L/R sde, QC16L/R sde, QC18L/R sde: QXC To ft QCC14L/R sde, QCC16L/R sde, QCC18L/R sde: QXCC All X-Range Cable Management accessble from the user sde of the desk, so cables reman accessble f desks placed back-to-back, or aganst walls or screens. Metal frame codes: B~~ = rectangular tube frame wth twn uprghts M~~ = radused tube frame wth ntegral wre management Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Add suffx W for tops n the selected fnsh and all other panels n Whte Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG] X-Range Prce Lst January 2018 31
RECEPTIONS SPECIFICATIONS AND FOOTPRINTS Desks 735mm hgh. Deskovers 400mm hgh (externally) and 375mm hgh (nternally). Components may be combned as desred. Desks may be used wth or wthout deskovers or glass shelves Plannng footprnts for Quadrant and Radus components 1262mm 892mm 892mm 2252mm 1592mm RECEPTION DESKS, DESKOVERS AND PEDESTAL 1592mm Metal kckstrps and vertcal coverstrps between modules are n Slva, except on whte modules where coverstrps are Whte. Whte base s a combnaton of vertcal panels n standard Whte MFC wth tops n any standard fnsh. We also offer a premum combnaton (Group 2) of Gloss Whte MFC on vertcal panels and tops n any standard fnsh. Group 1: Any standard or Whte base combnaton fnsh Group 2: Gloss Whte vertcal panels wth any standard fnsh on the tops all 735mm hgh Rectangular Sze (mm) Code Grp 1 Grp 2 800x800 Q2D8F/**/M~~ 1000x800 Q2D10F/**/M~~ 1200x800 Q2D12F/**/M~~ 1400x800 Q2D14F/**/M~~ 1600x800 Q2D16F/**/M~~ 1800x800 Q2D18F/**/M~~ 2000x800 Q2D20F/**/M~~ all 400mm hgh Sze (mm) Code Grp 1 Grp 2 Rectangular 431x400 Q2DO4/**/M~~ 800x400 Q2DO8/**/M~~ 1000x400 Q2DO10/**/M~~ 1200x400 Q2DO12/**/M~~ 1400x400 Q2DO14/**/M~~ 1600x400 Q2DO16/**/M~~ 1800x400 Q2DO18/**/M~~ 2000x400 Q2DO20/**/M~~ wth modesty panel nset by 500mm (to facltate wheelchar access): Sze (mm) Code Grp 1 Grp 2 800x800 Q2D8F/**/D/M~~ 1000x800 Q2D10F/**/D/M~~ 1200x800 Q2D12F/**/D/M~~ 1400x800 Q2D14F/**/D/M~~ 1600x800 Q2D16F/**/D/M~~ 1800x800 Q2D18F/**/D/M~~ 2000x800 Q2D20F/**/D/M~~ Curved 90 arc x400 42 arc x400 Q2DO90Q/**/M~~ Q2DO42R/**/M~~ Quadrant - small Sze (mm) Code Grp 1 Grp 2 90 x800 Q2L90QF/**/M~~ The Q2L90QF MUST be ordered wth at least one recessed panel (see below) to allow access when assemblng. Note: Ths unt does not provde sttng space. Quadrant - large 1600r.x800 Q2L90RF/**/M~~ (1600r s nomnal: the actual radus s 1592mm) 1600r. x400 Q2DO90R/**/M~~ The Q2DO42R may be used to cover half the wdth of a Q2L90RF, or combned wth a Q2GS45RM recepton glass shelf to cover the whole wdth. It s 42 (rather than 45 ) to avod part-coverng the central cable port on the desk below. Desk heght (735mm), desk depth counter pedestal wth kckplate Sze (mm) Code Grp 1 Grp 2 431x800 Q2DDP3/**/K~~ To specfy Recessed End Panels: Add to the end of the code: /LP for left panel + /RP for rght panel + /BP for both panels + Recessed panels should only be ftted f the desk s lnked to a supportng unt on at least one sde, but cannot be specfed on desks wth nset modesty panel. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Add suffx W for tops n the selected fnsh and all other panels n Whte. Premum: Add suffx H for standard fnsh tops combned wth Gloss Whte vertcal panels. Replace ~~ wth metal colour Slva kckplates and coverstrps=sa Slva kckplates and whte coverstrps=sw 32 X-Range Prce Lst January 2018
RECEPTION GLASS SHELVES ON COLUMN SUPPORTS Sze (mm) Code Prce 800x300x212 QGS8/MSA 1000x300x212 QGS10/MSA 1200x300x212 QGS12/MSA 1400x300x212 QGS14/MSA 1600x300x212 QGS16/MSA 1800x300x212 QGS18/MSA 2000x300x212 QGS20/MSA 90 x300x212 Q2GS90Q/MSA To ft Q2L90QF 1600r. x300x212 (curved) Q2GS45R/MSA Half the arc of a Q2L90RF. One or two may be ftted to a Q2L90RF As above, wth perforated steel front panel Sze (mm) Code Prce 800x300x212 QGS8M/MSA 1000x300x212 QGS10M/MSA 1200x300x212 QGS12M/MSA 1400x300x212 QGS14M/MSA 1600x300x212 QGS16M/MSA 1800x300x212 QGS18M/MSA 2000x300x212 QGS20M/MSA 90 x300x212 Q2GS90QM/MSA To ft Q2L90QF 1600r. x300x212 (curved) Q2GS45RM/MSA Half the arc of a Q2L90RF. One or two may be ftted to a Q2L90RF. Glass s 10mm thck, hardened and toughened. 800mm and 1000mm wde shelves have two support columns: 1200mm, 1400mm and 1800mm have three, and 2000mm four. COFFEE TABLES 600x600x400mm QCT6/**/AB 600x1000x400mm QCT10/**/AB 800 dam. x 400mm QCTD8/**/AB 600 dam. x 400mm QCTXD6/**/~~ 800 dam. x 400mm QCTXD8/**/~~ Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Add suffx W for tops n the selected fnsh and all other panels n Whte Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH [5% uplft: Raw Steel - Matt=RM Raw Steel - Gloss=RG, not avalable for receptons] X-Range Prce Lst January 2018 33
DESK HEIGHT STORAGE UNITS, 525MM DEEP Open (nc. one 18mm shelf) 800x525x735mm QS7/** 1000x525x735mm QS710/** Panel doors, lockng (nc. one 18mm shelf) 800x525x735mm QS7A/** 1000x525x735mm QS710/A/** Two flng drawers, lockng 800x525x735mm QS7D/** 1000x525x735mm QS710/D/** Vertcal tambour, lockng, empty 800x525x735mm QS7T/**/~~ Sde openng tambour, lockng, empty 1000x525x735mm QS710S/**/~~ S1 or S3 DESK HEIGHT STORAGE UNITS WITH 600MM DEEP TOPS Open (nc. one 18mm shelf) 800x600x735mm QSE7/** 1000x600x735mm QSE710/** Panel doors, lockng (nc. one 18mm shelf) 800x600x735mm QSE7A/** 1000x600x735mm QSE710A/** Two flng drawers, lockng 800x600x735mm QSE7D/** 1000x600x735mm QSE710D/** Vertcal tambour, lockng, empty 800x600x735mm QSE7T/**/~~ S1 or S3 Sde openng tambour, lockng, empty 1000x600x735mm QSE710S/**/~~ S1 or S3 Note: Woodgran on storage unts wth runs front-to-back, for use as an extenson to a corner desk. Left-to-rght gran may be ordered as a Specal. STORAGE UNITS 1200MM 2000MM, 525MM DEEP BOOKCASES Open Open Sldng glass doors 800x525x1200mm QS12/** 1000x525x1200mm QS1210/** S2 S2 1000x525x1600mm QS1610/** Full heght panel doors, lockng S2 1000x525x2000mm QS2010/** S2 (ncl. one 25mm shelf) 800x400x865mm QB8/** 1000x400x865mm QB810/** S4 S5 800x400x865mm QB8G/** 1000x400x865mm QB810G/** Stacks on 735mm unt to gve heght of 1600mm SHELF UNITS 400MM DEEP S4 S5 1000x525x1200mm QS12A/** 1000x525x1200mm QS1210A/** S2 S2 1000x525x1600mm QS1610A/** S2 1000x525x2000mm QS2010A/** (ncl. one 25mm shelf) S2 800x400x735mm QB7/** 1000x400x735mm QB710/** (ncl. one 18mm shelf) 1000x400x1200mm QB1210/** Sde-openng plastc tambour, lockng 1000x525x1200mm QS1210S/**/~~ 1000x525x1600mm QS1610S/**/~~ 1000x525x2000mm QS2010S/**/~~ S1 S1 S1 All storage unts and bookcases suppled empty except where ndcated. 1000x400x1600mm QB1610/** Incl. one 25mm shelf 1000x400x2000mm QB2010/** Shelf for 1000 x 400mm deep shelf unts (25mm) QBS1025/** Safety note: 2000 x 400mm unts must be angled slghtly backwards aganst a wall, and deally wall-fxed. Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Add suffx W for tops n the selected fnsh and all other panels Whte. Add suffx E for the selected fnsh on drawer/door fronts and all other panels (ncludng top) n Whte. Replace ~~ wth tambour colour: Slate=SL Slva=SA Whte=WH 34 X-Range Prce Lst January 2018
DESK-HEIGHT STORAGE UNITS, 525MM DEEP STORAGE FITTINGS Sde-openng tambour unts are 1000mm wde externally but take 800mm fttngs. All storage unts prced empty except where ndcated. All 2000mm hgh unts (excludng tambour unts) ftted wth one matchng 25mm shelf to ad structural stablty n transt and use. Ths shelf must be ftted as close to the centre of the storage unt as possble. Safety notes: When fttng roll-out flng frames n storage/tambour unts, for safety and stablty reasons ALWAYS ft and load startng at the very bottom of the unt. ALWAYS fully load the lower roll-out flng frame before startng to load the frame above and NEVER put more than three roll-out flng frames n a storage unt. NEVER roll out more than one frame at a tme. Ant-tlt cable kts are avalable as an optonal extra at pont of purchase. When nstallng storage unts t s advsable to set the unt so that t s leanng slghtly backwards. Ths ensures that frames cannot roll out unntentonally. For stablty reasons we do not recommend fttng roll out flng frames behnd double doors on desk-heght unts, unless optonal counterbalance weghts are ftted: POA. Storage unts are suppled assembled as standard. Any 800mm or 1000mm storage unt may be suppled KD for an addtonal charge of Ant-tlt Cables QAT2 Ant-tlt cable kt for 2 fle frames (supply only) QAT2F As above, factory ftted (specfed at pont of order) QAT3 Ant-tlt cable kt for 3 fle frames (supply only) QAT3F As above, factory ftted (specfed at pont of order) Roll-out flng frame, A4/foolscap 800mm QFF8 1000mm QFF10 S1 S2 Lateral & prnt-out flng ral 800mm QLF8 1000mm QLF10 S1 S2 Note: 1000mm sde tambours take 800mm fttngs Storage Unt Shelf 800mm x 525 x25mm S1 QS825/** 1000mm x 525 x 25mm S2 QS1025/** Shelf for low storage (QS7) 800mm x 525 x 18mm S3 QS8/** Bookcase Shelf 800mm x 400 x 25mm S4 QBS825/** 1000mm x 400mm (25mm) S5 QBS1025/** S1 S2 S3 S4 S5 codes next to each unt and each sze of shelf ndcate whch shelves to order to ft the unt concerned. The We do not lst shelf codes aganst low unts that are suppled wth a shelf as standard. LOCKERS 735mm hgh x 525mm deep (nternal depth 475mm). 800mm and 400mm wde. 1 compartment 347mm x 667mm QL7451/** 2 compartments each 347mm x 324mm QL7452/** 2 compartments each 361mm x 667mm QL7852/** 4 compartments each 361mm x 324mm QL7854/** 1725mm hgh x 525mm deep (nternal depth 475mm). 400mm wde. 1 compartment 347mm x 1657mm QL17451/** 2 compartments each 347mm x 819mm QL17452/** 3 compartments each 347mm x 540mm QL17453/** 4 compartments each 347mm x 400mm QL17454/** 5 compartments each 347mm x 313mm QL17455/** Optons prced per door Lockers have mastered key locks wth captve keys* as standard Electronc combnaton lock (wth master code overrde) Letter slot Fnger pull (only wth key lock) Name holder *A captve key remans n the lock when t s opened, enablng the key to be used to open the door. Key lock and fngerpull Electronc lock Name holder Letter slot Replace ** wth fnsh: Beech=QB Black=BK Concrete=CC Maple=QP Natural Oak=NO Natural Walnut=WN Slate=SL Whte=WH Zebrano=ZB Zebrano Sand=ZS Add suffx W for tops n the selected fnsh and all other panels Whte. Add suffx E for the selected fnsh on drawer/door fronts and all other panels (ncludng top) n Whte. X-Range Prce Lst January 2018 35
QSPA SOLID FULL-HEIGHT SCREENS, STRAIGHT 1070mm hgh upholstered Wdth Code Grp1 Grp2 Pnnable 431mm QS43110S/~~/+ + 500mm QS50010S/~~/+ + 525mm QS52510S/~~/+ + 600mm QS60010S/~~/+ + 800mm QS80010S/~~/+ + 1000mm QS10010S/~~/+ + 1200mm QS12010S/~~/+ + 1400mm QS14010S/~~/+ + 1431mm QS14310S/~~/+ + 1600mm QS16010S/~~/+ + 1631mm QS16310S/~~/+ + 1800mm* QS18010S/~~/+ + 1600mm hgh upholstered Wdth Code Grp1 Grp2 Pnnable 431mm QS43116S/~~/+ + 500mm QS50016S/~~/+ + 525mm QS52516S/~~/+ + 600mm QS60016S/~~/+ + 800mm QS80016S/~~/+ + 1000mm QS10016S/~~/+ + 1200mm QS12016S/~~/+ + 1400mm QS14016S/~~/+ + 1431mm QS14316S/~~/+ + 1600mm QS16016S/~~/+ + 1631mm QS16316S/~~/+ + 1200mm hgh upholstered Wdth Code Grp1 Grp2 Pnnable 431mm QS43112S/~~/+ + 500mm QS50012S/~~/+ + 525mm QS52512S/~~/+ + 600mm QS60012S/~~/+ + 800mm QS80012S/~~/+ + 1000mm QS10012S/~~/+ + 1200mm QS12012S/~~/+ + 1400mm QS14012S/~~/+ + 1431mm QS14312S/~~/+ + 1600mm QS16012S/~~/+ + 1631mm QS16312S/~~/+ + 1800mm* QS18012S/~~/+ + 1800mm hgh upholstered Wdth Code Grp1 Grp2 Pnnable 431mm QS43118S/~~/+ + 500mm QS50018S/~~/+ + 525mm QS52518S/~~/+ + 600mm QS60018S/~~/+ + 800mm QS80018S/~~/+ + 1000mm QS10018S/~~/+ + 1200mm QS12018S/~~/+ + 1400mm QS14018S/~~/+ + 1431mm QS14318S/~~/+ + 1600mm QS16018S/~~/+ + 1631mm QS16318S/~~/+ + QSPA PART-GLAZED STRAIGHT SCREENS (glazed above 900mm) 1200mm hgh part-glazed Wdth Code Grp1 Grp2 Pnnable 431mm QS43112P/~~/**/+ + 500mm QS50012P/~~/**/+ + 525mm QS52512P/~~/**/+ + 600mm QS60012P/~~/**/+ + 800mm QS80012P/~~/**/+ + 1000mm QS10012P/~~/**/+ + 1200mm QS12012P/~~/**/+ + 1400mm QS14012P/~~/**/+ + 1431mm QS14312P/~~/**/+ + 1600mm QS16012P/~~/**/+ + 1631mm QS16312P/~~/**/+ + 1800mm* QS18012P/~~/**/+ + 1600mm hgh part-glazed Wdth Code Grp1 Grp2 Pnnable 431mm QS43116P/~~/**/+ + 500mm QS50016P/~~/**/+ + 525mm QS52516P/~~/**/+ + 600mm QS60016P/~~/**/+ + 800mm QS80016P/~~/**/+ + 1000mm QS10016P/~~/**/+ + 1200mm QS12016P/~~/**/+ + 1400mm QS14016P/~~/**/+ + 1431mm QS14316P/~~/**/+ + 1600mm QS16016P/~~/**/+ + 1631mm QS16316P/~~/**/+ + 1800mm* QS18016P/~~/**/+ + 1800mm hgh part-glazed Wdth Code Grp1 Grp2 Pnnable 431mm QS43118P/~~/**/+ + 500mm QS50018P/~~/**/+ + 525mm QS52518P/~~/**/+ + 600mm QS60018P/~~/**/+ + 800mm QS80018P/~~/**/+ + 1000mm QS10018P/~~/**/+ + 1200mm QS12018P/~~/**/+ + 1400mm QS14018P/~~/**/+ + 1431mm QS14318P/~~/**/+ + 1600mm QS16018P/~~/**/+ + 1631mm QS16318P/~~/**/+ + 1800mm* QS18018P/~~/**/+ + Replace + wth fabrc colour code (fabrc colour codes lsted on our screen fabrc swatch cards). *Cauton: fabrc runs vertcally on all screens except those 1800mm and wder, where fabrc wdth lmtatons mean fabrc must run horzontally: beware possble pattern msmatch. Screen fabrcs: Group 1: Camra Cara, Carlow Group 2: Camra Blazer Lte, Era 170, L2, Luca, Nexus, Racer, Sonus. To specfy pnnable add /PN to the code. Replace ~~ wth metal frame colour: Black=BK Slate=SL Slva=SA Whte=WH Replace ** wth fnsh: CG=Clear PC=Clear Frosted 36 X-Range Prce Lst January 2018
FITTINGS FOR STABILISING AND LINKING FULL-HEIGHT SCREENS All screens suppled wth levellng feet. A stablsng foot s generally requred at the begnnng and end of a run of screens, and any straght run of more than two screens. A stablsng half-foot can sometmes be used to avod encroachng on walkways, or where an obstructon on one sde of a screen precludes the use of a full foot. Note: two stablsng half-feet cannot be ftted ether sde of a screen end post: use a full foot. A stablsng bracket can be used wth desks n place of a stablsng foot, at the end of a screen run, where the fnal screen abuts the rear of a desk, fxed extenson or storage unt and fnshes flush wth the end panel of the tem concerned. We do not recommend a straght run of more than 4000mm wthout addtonal support from furnture or a screen lnked at an angle of 90. QSPA STABILISING FEET AND BRACKETS QSSF/M## Stablsng foot QSSSBPE/M## Screen stablsng bracket QSSFHF/M## Stablsng half-foot QSSFV/M## Stablsng hgh-vsblty foot LINKING FITTINGS Each screen suppled wth one flexble lnkng strp. Rgd Lnkng Fttngs These may be used n addton to a lnkng strp where t s desred to lock two screens more rgdly together at 45, 60, 90 or n a straght lne. 45 rgd lnkng bracket QSRL45/## per pack of 5 Straght rgd lnkng bracket QSSRL/## per pack of 5 60 rgd lnkng bracket QSRL60/## per pack of 5 90 rgd lnkng bracket QSRL90/## per pack of 5 QSPA SCREENS FOR FREESTANDING DESKS UPHOLSTERED (brackets ncluded) Accessory bar not avalable on 465. 340mm hgh upholstered, plan frame Wdth Code Grp1 Grp2 Pnnable 800mm QS80034SS/~~/+ + 1000mm QS10034SS/~~/+ + 1200mm QS12034SS/~~/+ + 1400mm QS14034SS/~~/+ + 1431mm QS14334SS/~~/+ + 1600mm QS16034SS/~~/+ + 1631mm QS16334SS/~~/+ + 1800mm* QS18034SS/~~/+ + 340mm hgh upholstered, wth accessory bar Wdth Code Grp1 Grp2 Pnnable 800mm QS80034SS/~~/+/AB + 1000mm QS10034SS/~~/+/AB + 1200mm QS12034SS/~~/+/AB + 1400mm QS14034SS/~~/+/AB + 1431mm QS14334SS/~~/+/AB + 1600mm QS16034SS/~~/+/AB + 1631mm QS16334SS/~~/+/AB + 1800mm* QS18034SS/~~/+/AB + 465mm hgh upholstered, plan frame Wdth Code Grp1 Grp2 Pnnable 800mm QS80046SS/~~/+ + 1000mm QS10046SS/~~/+ + 1200mm QS12046SS/~~/+ + 1400mm QS14046SS/~~/+ + 1431mm QS14346SS/~~/+ + 1600mm QS16046SS/~~/+ + 1631mm QS16346SS/~~/+ + 1800mm* QS18046SS/~~/+ + QSPA SCREENS FOR FREESTANDING DESKS CHANGE HEIGHT WAVE (brackets ncluded) QSPA SCREENS FOR FREESTANDING DESKS ACRYLIC (brackets ncluded) 340/465mm hgh upholstered, plan frame Wdth Code Grp1 Grp2 Pnnable 800mm QS803446US/~~/+ + 1000mm QS103446US/~~/+ + 1200mm QS123446US/~~/+ + 1400mm QS143446US/~~/+ + 1431mm QS153446US/~~/+ + 1600mm QS163446US/~~/+ + 1631mm QS173446US/~~/+ + 1800mm* QS183446US/~~/+ + 340mm hgh Acrylc,plan frame Wdth Code Acrylc 800mm QS80034GS/~~/** 1000mm QS10034GS/~~/** 1200mm QS12034GS/~~/** 1400mm QS14034GS/~~/** 1431mm QS14334GS/~~/** 1600mm QS16034GS/~~/** 1631mm QS16334GS/~~/** 1800mm QS18034GS/~~/** Replace + wth fabrc colour code (fabrc colour codes lsted on our screen fabrc swatch cards). *Cauton: fabrc runs vertcally on all screens except those 1800mm and wder, where fabrc wdth lmtatons mean fabrc must run horzontally: beware possble pattern msmatch. Screen fabrcs: Group 1: Camra Cara, Carlow Group 2: Camra Blazer Lte, Era 170, L2, Luca, Nexus, Racer, Sonus. To specfy pnnable add /PN to the code. Replace ~~ wth metal frame or bracket colour: Black=BK Slate=SL Slva=SA Whte=WH Replace ** wth fnsh: CG=Clear PC=Clear Frosted X-Range Prce Lst January 2018 37
QPAD SCREENS fully upholstered QPAD screens are desgned to be specfed 400mm shorter than the desk to whch they are ftted, leavng a 400mm gap between screens when ftted to adjacent desks. For sngle-sded bench desks and freestandng ndvdual desks Screens suppled wth clamp brackets that may be used on the rear of any desk, but not where there s a panel or metal frame (e.g. along the sde of a desk). 340mm hgh Recommended Desk Screen Wdth Wdth Code Grp 1 Grp 2 1000mm 600mm QP60034SS/~~/+ 1200mm 800mm QP80034SS/~~/+ 1400mm 1000mm QP10034SS/~~/+ 1600mm 1200mm QP12034SS/~~/+ 1800mm 1400mm QP14034SS/~~/+ 2000mm 1600mm QP16034SS/~~/+ 2200mm 1800mm* QP18034SS/~~/+ For double-sded bench desks Screens suppled wth a mountng ral. The ral runs the full wdth of the desk (400mm longer than the screen) so screens wder than recommended cannot be ftted. 340mm hgh Desk Screen Wdth Wdth Code Grp 1 Grp 2 1000mm 600mm QP60034SD/~~/+ 1200mm 800mm QP80034SD/~~/+ 1400mm 1000mm QP10034SD/~~/+ 1600mm 1200mm QP12034SD/~~/+ 1800mm 1400mm QP14034SD/~~/+ 2000mm 1600mm QP16034SD/~~/+ 465mm hgh Recommended Desk Screen Wdth Wdth Code Grp 1 Grp 2 1000mm 600mm QP60046SS/~~/+ 1200mm 800mm QP80046SS/~~/+ 1400mm 1000mm QP10046SS/~~/+ 1600mm 1200mm QP12046SS/~~/+ 1800mm 1400mm QP14046SS/~~/+ 2000mm 1600mm QP16046SS/~~/+ 2200mm 1800mm* QP18046SS/~~/+ 465mm hgh Desk Screen Wdth Wdth Code Grp 1 Grp 2 1000mm 600mm QP60046SD/~~/+ 1200mm 800mm QP80046SD/~~/+ 1400mm 1000mm QP10046SD/~~/+ 1600mm 1200mm QP12046SD/~~/+ 1800mm 1400mm QP14046SD/~~/+ 2000mm 1600mm QP16046SD/~~/+ Sngle-sded bench desks wth sldng tops cannot be ftted wth QPAD screens. Replace ~~ wth metal colour for brackets and rals: Black=BK Slate=SL Slva=SA Whte=WH Replace + wth fabrc colour code (fabrc colour codeslsted on our screen fabrc swatch cards). *Cauton: fabrc runs vertcally on all screens except those 1800mm and wder, where fabrc wdth lmtatons mean fabrc must run horzontally: beware possble pattern msmatch. Screen fabrcs: Group 1: Camra Cara, Carlow Group 2: Camra Blazer Lte, Era 170, L2, Luca, Nexus, Racer, Sonus 38 X-Range Prce Lst January 2018
WORKSURFACE SHAPES Rectangular Desks and Recepton Desks Offce Tables 800 1000 1200 1400 1600 1800 800 1200 1600 1800 800 QD8 (Q2D8F) QD10 (Q2D10F) QD12 (Q2D12F) QD14 (Q2D14F) 800 Bench Desks 600 QD16 (Q2D16F) QD18 1000 1200 1400 1600 1800 2000 QBS610(E) QBS612(E) QBS614(E) 1200 QBD610(E) QBD612(E) QBD614(E) 800 QBS810(E) 1600 1000 1000 1000 QBS812(E) QBS814(E) QBS616(E) QDS616(E) QBS816(E) QBS618(E) QDS618(E) QBS818(E) QBS620(E) 1200 1400 1600 1800 2000 QDS620(E) 1200 1400 1600 1800 2000 QBS820(E) 1200 1400 1600 1800 2000 QT8 QT12 QT16 QT18 Compact Corner Desks/ Smple Compact Corner Desks 1000 1800 1800 QCC18L (QCCS18L) 1600 1600 QCC16L (QCCS16L) 800 Bench and pedestal returns 800 600 1000 600 QCC18R (QCCS18R) QCC16R (QCCS16R) 120 Workstaton 1000 800 Ø QTD8 1000 Ø QTD10 1200 Ø QTD12 1000 800 QBD810(E) QBD812(E) QBD814(E) Corner Desks / Smple Corner Desks QC14L (QCS14L) 1200 QC14R (QCS14R) 1400 1400 800 QBD816(E) QBD818(E) QBD820(E) 1600 1600 1800 1800 QBR QRP3 QRP310 Double-Wave Desks 1000 1600 1800 QWD16 QWD18 QC120 Wave Desks 1000 QC14L (QCS14L) 1400 1400 1600 1600 1800 1800 800 QC14L (QCS14L) QC16L (QCS16L) QC16R (QCS16R) QW14L QW14R QW16L QW16R QW18L QW18R Compact Wave Workstatons (wth ntegral pedestal) 800 1200 600 1200 QC18L (QCS18L) 1400 1400 1600 1600 QC18R (QCS18R) Compact Double-Wave Desks 800 1400 1600 QWCD14 Recepton Deskovers QWCD16 Freestandng Returns 600 800 QR QRP 1000 QR10 800 1000 1000 QWRL 600 QWRR QWW12L QWW12R QWW14L QWW14R QWW16L QWW16R Compact Wave Desks 800 1000 1000 1200 1200 600 Recepton Glass Shelves 300 800 1000 1200 QGS8 QGS10 QGS12 400 431 800 1000 Q2DO4 400 Q2DO8 Q2DO10 1400 1600 Q2DO14 Q2DO16 1200 Q2DO12 QWRL 1300 QWRR Conference Ends QCE13 Coffee Tables 600 6001000 QCT6 QWR12L 800 1600 800 QCT10 QCE160 1640 QCE164 QWR12R 600 Ø QCTXD6 470 470 300 300 800 Ø QCTD8 QCTXD8 1400 1600 QGS14 Q2GS90Q Q2GS45R QGS16 Curved Recepton Desk 1600 800 800 Q2L90RF 1273 Q2L90QF 400 Q2DO90R Q2DO90Q Q2DO42R Conference Tables 2000-5000 (2500 shown) 1000-1200 (1200 shown) 2500-5000 (2500 shown) 1200 2500-5000 (2500 shown) 1200 X-Range Prce Lst January 2018 39
XR Seatng GENERAL INFORMATION Upholstery specfcatons and care CMHR foam s used as standard on all products. Fabrc should be vacuumed regularly wth approprate care. Ths helps remove contamnants and grtty partcles that have an abrasve effect whch reduces the lfe of the fabrc. Leather should be cleaned wth a soft damp cloth. For more thorough cleanng use a mld soluton of pure soap flakes (not detergent or other chemcals), beng careful not to soak the leather. After cleanng, polsh wth a soft dry cloth. Do not apply polshes or waxes. Avod placng leather upholstery n drect sunlght or close to heat sources such as radators. Colour and fnsh of fabrcs and leathers Fabrc and leather colours may vary slghtly from batch to batch so exact matchng cannot be guaranteed between orders placed at dfferent tmes. Leather may exhbt surface characterstcs such as scars, growth lnes and varatons n texture. These are not faults but smply aspects of the character of ths natural materal. User Weghts Please seek gudance from our Sales Offce f you need to accommodate users weghng n excess of 110kg (17st 4.5lb). Buldng Access Please note that some products, n partcular HB3 sofas, are large sngle-pece tems. It s the purchaser s responsblty to ensure that buldng access s adequate before orderng. In the event of drect delvery by Sven Chrstansen abortve delvery charges may become payable f delvery cannot be effected due to nadequate access. Guarantee We guarantee our seatng for fve years aganst any defects resultng from faulty materals or workmanshp, far wear and tear excluded, and subject to approprate use, care and mantenance. Specfcatons, prcng and terms We reserve the rght to amend or update specfcatons wthout pror notce. All prces are exclusve of VAT. All orders are accepted subject to our Terms & Condtons of Sale. 40 X-Range Prce Lst January 2018
FABRIC PRICE GROUPS Group X Camra Group A Camra Group B Camra Group C Camra Group D Camra Gabrel Group E Bute Camra Ctadel, Phoenx Era, Gravty, Rvet Advantage, Aspect, Canopy, Chateau, Manhattan, Patna, Sprnt, Urban, Velocty, X2, Xtreme Aspen, Blossom, Cedar, Honeycomb, Lnden, Man Lne Flax, Man Lne Plus, Poplar 24/7, 24/7 Flax, Aquarus, Blazer, Hebden, Hemp, H-Tech, Intervene, Landscape, Man Lne Flax Strpe, Oxygen, Slk, Synergy, Track, Tral Europost2, Fame, Gaja Classc Clyde, Elgn, Ramshead, Stuart, Troon, Turnberry Century, Code, Craggan, Graggan Flax, Indvduo, Strpes LEATHER PRICE GROUPS Group L CrestJMT Shelly Yarwood Style FAUX LEATHER (VINYL AND PU) PRICE GROUPS Group A Macflex Yarwood Group B Camra Cheftan Group C Camra Cheftan Macflex Vescom Yarwood Group D Cheftan Oporto, Tavra Dollaro Fgaro, Vta Just Colour, Just Patterns, Trmcell Classc, Trmcell Legend Nevada, Vence, Verona Casco, Marqus, Orent, Rvera, Self Colour, Solara, Tradtonal, Unversal Delta Leone Plus Aneurn, Churchll, Colorado, Nappa Soft Mult Stretch Fabrcs n bold are only sutable for task seatng. Other fabrcs sut ALL types of seatng. Subject to sutablty we are happy to upholster chars n customers own materal (COM), whch we wll source drect on request. Prced as Group A. See lstngs on p.50-52 for COM meterage requrements. For upholstery enqures, ncludng queres regardng customer s own materal, please contact Customer Servces. Further nformaton and samples are avalable from the fabrc supplers webstes below: A Murhead www.murhead.co.uk Brdge of Wer www.bowleather.co.uk Bute www.butefabrcs.com Camra www.camrafabrcs.com Cheftan CrestJMT Gabrel Macflex www.cheftanfabrcs.com www.crestjmtleather.co.uk www.gabrel.dk www.macflex.com Vescom Yarwood www.vescom.com www.yarwood.co.uk X-Range Prce Lst January 2018 41
EXECUTIVE CHAIRS XRE1 XRE1C Prce band X A B C D E L XRE1 slm adjustable arms Prce band X A B C D E L XRE1C no arms XRE1CA rng arms Standard Specfcatons Synchro mechansm: adjustable seat heght: backrest heght easly adjustable wth concealed ratchet mechansm. Free-rollng castors, sutable for use on carpets or other soft floorng (for optonal castors see p.43). Suppled assembled and bagged. Optons Polshed Alumnum base... Sldng seat/seat depth adjustment... Two-tone seat/back upholstery (same fabrc range)... Inflatable lumbar support... Standard Specfcatons Black frame. Suppled assembled and bagged. Optons Chrome frame... XRE2 XRE2C Prce band X A B C D E L XRE2 slm adjustable arms POA Prce band XRE2C no arms XRE2CA rng arms X A B C D E L POA POA Standard Specfcatons M4 Synchro mechansm: adjustable seat heght: adjustable lumbar support: adjustable seat depth. Free-rollng castors, sutable for use on carpets or other soft floorng (for optonal castors see p.43). Suppled assembled and bagged. Optons Polshed Alumnum base... Standard Specfcatons Black frame. Suppled assembled and bagged. Optons Chrome frame... 42 X-Range Prce Lst January 2018
WORKING CHAIRS XR1 XRL1 XR2 Prce band X A B C D Hgh back no arms XR1H & XR2H Hgh back ht adj arms XR1HA/HA XR2HA/HA Large Hgh back no arms XRL1H Large Hgh back ht adj arms XRL1HA/HA Optonal heght adjustable arms for XR1, XR2 and XRL1 XR3 XR4 Slm heght adjustable arms for XR3 and XR4 Prce band X A B C D Hgh back no arms XR3H Hgh back slm ht adj arms XR3HA/SHA Mesh back no arms XR4 Mesh back slm ht adj arms XR4/SHA Polshed Alumnum base Standard Specfcatons Swvel chars: 2-lever manual mechansm: adjustable seat heght, adjustable back angle. Manually adjustable backrest heght. Free-rollng castors sutable for use on carpets or other soft floorng. Suppled assembled and bagged. Optons Two-tone seat/back upholstery (same fabrc range)... Swvel chars only Fold back heght adjustable arms (addton to no arms prce)... Backrest heght adjustment wth concealed ratchet mechansm (n place of manual adjustment)... 3-lever manual mechansm: adjustable seat heght, back angle and seat angle... Synchro mechansm: adjustable seat/back angle and seat heght (ncludes backrest heght adjustment wth concealed ratchet mechansm wthn the cost: not avalable on XR4)... Synchro mechansm wth adjustable seat/back angle and seat heght, for XR4 only... Sldng seat/seat depth adjustment... Inflatable lumbar support (not avalable on XR4)... Polshed Alumnum base... Casher base (155mm hgher column, footrng, gldes). Avalable wth 2-lever mechansm only... Castors wth soft wheels (50mm) for hard surfaces, free rollng... Castors wth soft wheels (50mm) braked when unloaded... Castors wth hard wheels (50mm) braked when unloaded... Casher base Foldable arms - folded Foldable arms - up X-Range Prce Lst January 2018 43
MEETING CHAIRS XR1C XR2C XR3C Prce band No arms black frame XR1C & XR2C No arms chrome frame XR1C & XR2C Prce band No arms black frame XR3C No arms chrome frame XR3C X A B C D X A B C D Optons Two-tone seat/back upholstery (same fabrc range)... XRV3 XRV4 Prce band X A B C D Wth arms black frame XRV3AB Wth arms chrome frame XRV3AC No arms black legs XRV4B Wth arms black legs XRV4AB No arms chrome legs XRV4C Wth arms chrome legs XRV4AC XRV3: stackable three hgh XRV4: stackable fve hgh XRV4: Certfcated to BS 4875-1:2001 Test Level 4 and BS 7945:1999 Optons Two-tone seat/back upholstery (same fabrc range)... Lnkng devce for XRV4 (lnks under char seat)... Trolley for up to sx XRV3/4 chars (code XRTROL)... Beech wrtng tablet for XRV4A (code XRVTAB34)... Castors (XRV4 models)... Optonal castors 44 X-Range Prce Lst January 2018
MEETING AND CANTEEN CHAIRS: BEAM AND POSEUR-HEIGHT SEATING XRB1 XRB2 Prce band (for fabrc seat) No arms 4 legs XRB1 Hoop arms 4 legs XRB1A-1 Cantlever arms 4 legs XRB1A-2 No arms skd frame XRB2 Stool No arms 4 legs XRB1ST XRB Colour Optons unupholstered X A B C D Frames n Polshed Chrome. Shells n: Grey, Whte, Brown, Gentan Blue, Red, Black, Pale Green (stock colours n bold) Certfcated to BS EN15373:3007 level 2 (general use) Stackable seven hgh Moble dolly MD12 (to carry up to 25 chars)... XRC1 XRC1 XRC1 Colour Optons Frames n Polshed Chrome. Shells n: Black, Orange, Red, Sand, Pstacho, Grey, Blue, Whte, (stock colours n bold) Stackable sx hgh Tested to EN13761/2002 (dmensons & safety), EN1022/05 (stablty), EN1728/2000 (statc load, fatgue and durablty) XRP2 XRP3 Fnsh XRP2 XRP3 Maple veneer Stackable four hgh Optons Shell staned to fnsh, from lst below... Oak, Cherry, Natural Walnut X-Range Prce Lst January 2018 45
MEETING CHAIRS XRV1 XRV2 Optons Two-tone seat/back upholstery (same fabrc range)... Hoop arms (steel encapsulated n black polypropylene)... Lnkng devce (please add code XRVLINK12)... Note: chars usually lnked between rear legs only, but for even more rgd lnkng the front legs may be lnked wth a second devce. Prce band X A B C D XRV1 black frame XRV2 chrome frame Certfcated to BS EN 1728:2001. Stackable fve hgh XRV5A XRV6 Prce band XRV5A wth arms beech frame Prce band XRV6 no arms beech frame XRV6A wth arms beech frame X A B C D X A B C D Stackable four hgh XRV5A s certfcated to BS EN 15373: 2007 level 3 (severe use) Optons Two-tone seat/back upholstery (same fabrc range)... Frame staned to fnsh, from lst below... Oak, Cherry, Natural Walnut Stackable four hgh XRV6 s certfcated to BS EN 15373: 2007 level 2 (strength, durablty and safety) Optons Two-tone seat/back upholstery (same fabrc range)... Frame staned to fnsh, from lst below... Oak, Cherry, Natural Walnut 46 X-Range Prce Lst January 2018
RECEPTION AND BREAKOUT SEATING XRM Prce band XRM1 XRM2 XRM3 X A B C D E L W x D x H 840x700x680mm 1470x700x680mm 2070x700x680mm Prce band XRMUC XRMUC Corner Sofa (1+2 seat) /L=Left-handed /R=Rght-handed. Left-handed shown above XCU1 Scatter Cushon (sutable for use wth any XRM or XRMH seatng) XRMUD Corner Sofa (2+2 seat) (symmetrcal, 2 seats each sde of the corner) X A B C D E L W x D x H 2000x1450x680mm 610x170x320mm 2000x2000x680mm Feet: Polshed Chrome Optons: Two-tone seat/back upholstery (same fabrc range) MFC fnshes Beech (QB), Concrete (CC), Maple (QP), Natural Oak (NO), Natural Walnut (WH), Whte (WH), Zebrano Sand (ZS), Zebrano (ZB) Veneer fnshes Cherry (CY), Lght Oak (LO), Macassar Gold (MG), Macassar Tan (MT), Maple (MA), Natural Walnut (NW), Smoked Oak (SO), Wenge (WG) Feet: Polshed Chrome Integral flush-fttng power and USB chargng port plus lead: Whte QCPS12WH/WC Black QCPS12BK/WC... plus 4m supply lead QTF4... Prce band X A B C D E L X A B C D E L MFC top XRM Coffee Tables Veneer top Clear glass top Square (700x700x420mm) XRMCTS Black mrror glass top Rectangular (1010x590x420mm) XRMCTR X-Range Prce Lst January 2018 47
RECEPTION AND BREAKOUT SEATING XRMH Prce band XRMH1 Sngle seat XRMH2 Two seat XRMH3 Three seat X A B C D E W x D x H 840x700x1360mm 1470x700x1360mm 2070x700x1360mm To avod buldng access problems on delvery, XRMH unts suppled as upper and lower sectons to be combned once postoned on ste. XRMH Prce band XRMHL Lnk Panel Fnsh XRMHT1 Table for 2 x sngle seats X MFC A Veneer XRMHT2 Table for 2 x 2-seaters XRMHT3 Table for 2 x 3-seaters B C D E W x D x H 800x100x1360mm W x H 500 x 655mm 900 x 655mm 1500 x 655mm Feet: Polshed Chrome Optons Two-tone seat/back upholstery (same fabrc range)... Cable port n table... Cable port through lnk panel (just under table top level)... Scatter cushon XCU1 for use wth XRM seatng range, see p.47. Integral flush-fttng power and USB chargng port plus lead: Whte QCPS12WH/WC Black QCPS12BK/WC... plus 4m supply lead QTF4... Wreless chargng for XRMHT Table: suppled wth a 1.9m lead ftted USB Type A plug. Requres a separate charger. Black QAIR4/BK/WC... Whte QAIR4/WH/WC... Wreless USB plug charger (output 5.0V 2.0A) QAIR6C... MFC fnshes (for tables) Beech (QB), Concrete (CC), Maple (QP), Natural Oak (NO), Natural Walnut (WH), Whte (WH), Zebrano Sand (ZS), Zebrano (ZB). Veneer fnshes (for tables) Cherry (CY), Lght Oak (LO), Macassar Gold (MG), Macassar Tan (MT), Maple (MA), Natural Walnut (NW), Smoked Oak (SO), Wenge (WG) 48 X-Range Prce Lst January 2018
RECEPTION AND BREAKOUT SEATING XRT Prce band XRT1 XRT2 XRTP1 XRTP2 X A B C D E L W x D x H 680x600x780mm 1270x600x780mm 680x600x780mm 1270x600x780mm Optons Two-tone seat/back upholstery (same fabrc range)... 50mm Ø chrome gldes (n place of standard 25mm black plastc feet): for XRT1... for XRT2... X-Range Prce Lst January 2018 49
PHYSICAL MEASUREMENTS (n mm): WORKING CHAIRS G C A F D H B E A B C D E F G H Char Char Heght of Seat Seat Seat Heght of Foot Base COM Fabrc n Model Heght Wdth Backrest Wdth Depth Heght Arm Rest Dameter Lnear Metres XRE1A 1050/1190 600 620/700 500 490 480/600 210 690 1.5 XRE1HA 1050/1190 660 620/700 500 490 480/600 190/290 690 1.5 XRE2A 1130/1250 600 650 500 490 480/600 210 690 0.7 XRE2HA 1130/1250 660 650 500 490 480/600 190/290 690 0.7 XR1MA/HA 910/1040 650 470 490 480 480/600 190/270 640 0.7 XR1H 970/1100 480 530 490 480 480/600 n/a 640 0.7 XR1HA 970/1100 590 530 490 480 480/600 210 640 0.7 XR1HA/HA 970/1100 650 530 490 480 480/600 190/270 640 0.7 XRL1H 1040/1170 515 580 510 500 480/600 n/a 640 0.7 XRLHA 1040/1170 620 580 510 500 480/600 210 640 0.7 XRL1HA/HA 1040/1170 660 580 510 500 480/600 190/270 640 0.7 XR2H 970/1100 480 570 490 470 480/600 n/a 640 0.7 XR2HA 970/1100 590 570 490 470 480/600 210 640 0.7 XR2HA/HA 970/1100 650 570 490 470 480/600 190/270 640 0.7 XR3H 970/1100 480 550 490 490 480/600 n/a 640 0.7 XR3HA 970/1100 590 550 490 490 480/600 210 640 0.7 XR3HA/SHA 970/1100 650 550 490 490 480/600 190/290 640 0.7 XR4 970/1100 590 550 490 490 480/600 210 640 0.7 XR4/SHA 970/1100 650 550 490 490 480/600 190/290 640 0.7 50 X-Range Prce Lst January 2018
PHYSICAL MEASUREMENTS (n mm): VISITORS/MEETING/CANTEEN CHAIRS C A F G D B E H A B C D E F G H Char Char Heght of Seat Seat Seat Heght of Char COM Fabrc n Model Heght Wdth Backrest Wdth Depth Heght Arm Rest Depth Lnear Metres XR1C 935 490 475 490 480 480 n/a 580 0.7 XR1CA 935 595 475 490 480 480 690 580 0.7 XR2C 970 490 510 490 470 480 n/a 580 0.7 XR2CA 970 595 510 490 470 480 690 580 0.7 XR3C 950 490 490 490 490 480 n/a 580 0.7 XR3CA 950 595 490 490 490 480 690 580 0.7 XRB1 840 490 410 430 430 460 n/a 480 0.6 XRB1A-1 840 590 410 430 430 460 670 480 0.6 XRB1A-2 840 580 410 430 430 460 670 480 0.6 XRB1ST 1150 540 400 440 455 750 n/a 550 0.6 XRB2 840 540 410 430 430 465 n/a 480 0.6 XRC1 830 440 400 420 410 475 n/a 460 n/a XRE1C 930 545 490 500 480 480 n/a 600 1.5 XRE1CA 930 600 490 500 480 480 210 600 1.5 XRE2V 1040 545 560 500 480 480 n/a 600 0.7 XRE2VA 1040 600 560 500 480 480 690 600 0.7 XRP2 855 500 435 410 415 450 n/a 530 n/a XRP3 855 500 435 410 415 450 n/a 530 n/a XRV1 825 540 300 455 430 520 n/a 545 0.6 XRV2 825 540 300 455 430 520 n/a 545 0.6 XRV3A 820 520 380 480 460 480 660 550 0.7 XRV4 800 500 385 450 450 475 n/a 540 0.7 XRV4A 800 580 385 450 450 475 660 540 0.7 XRV5A 845 545 430 415 480 480 655 525 0.8 XRV6 875 585 465 500 460 470 n/a 580 1.3 XRV6A 875 585 465 500 460 470 660 580 1.3 X-Range Prce Lst January 2018 51
PHYSICAL MEASUREMENTS (n mm): RECEPTION AND BREAKOUT SEATING E F D A G B C A B C D E F G Char Char Char Heght of Seat Seat Seat COM Fabrc n Model Heght Wdth Depth Backrest Wdth Depth Heght Lnear Metres XRT1 780 680 600 360 520 490 440 3 XRTP1 780 680 600 360 520 490 440 3.4 XRT2 780 1270 600 360 1135 490 440 4.5 XRTP2 780 1270 600 360 1135 490 440 4.9 XRM1 680 840 700 300 540 510 400 4.2 XRM2 680 1470 700 300 1060 510 400 5.7 XRM3 680 2070 700 300 1680 510 400 7.7 XRMUC 680 2000 1450 300 1680 510 400 11.4 XRMUD 680 2000 2000 300 1680 510 400 15.4 XRMCTS 420 700 700 n/a n/a n/a n/a 2.45 XRMCTR 420 1010 590 n/a n/a n/a n/a 1.9 XRMH1 1360 840 700 1020 540 510 400 8.4 XRMH2 1360 1470 700 1020 1060 510 400 12.1 XRMH3 1360 2070 700 1020 1680 510 400 15.7 52 X-Range Prce Lst January 2018
MFC FINISHES Beech MFC (QB) Black MFC (BK) Concrete MFC (CC) Maple MFC (QP) Natural Oak MFC (NO) Natural Walnut MFC (WN) Slate (SL) Whte MFC (WH) Zebrano MFC (ZB) Zebrano Sand MFC (ZS) METAL COLOURS Black (BK) Slva (SA) Raw Steel - Gloss Coated (RG) Raw Steel - Matt Coated (RM) Slate (SL) Whte (WH) FM 86198 EMS 504871 Colour accuracy - Due to varatons n lghtng and the lmtatons of the prntng process, varatons n colour may occur between the llustratons n ths brochure and manufactured tems. Samples of all our fnshes are avalable on request from our Customer Servce Department. X-Range Prce Lst January 2018 53
54 X-Range Prce Lst January 2018
STANDARD TERMS AND CONDITIONS OF SALE 1. GENERAL (a) Sven Chrstansen plc, herenafter referred to as Sven plc, provde all quotatons and accept all orders for the supply of furnture and goods as detaled n any quotaton and/ or order subject only to the terms and condtons whch follow and to the excluson of all other guarantees, condtons and warrantes (ncludng any as to qualty and ftness for any partcular purpose) whether express or mpled by statute or common law or otherwse. In the event of a purchaser s order contanng condtons such condtons are only bndng nsofar as they are not nconsstent wth Sven plc s terms and condtons as heren set out. (b) No addtons to or varatons from Sven plc s acknowledged prce or terms and condtons shall have effect unless such varaton or addton s expressly accepted by Sven plc n wrtng under the hand of a Drector. Sven plc s employees or agents are not authorsed to make any representatons unless confrmed by a drector of the company n wrtng. On orderng any goods and furnture and beng accepted by Sven plc the Purchaser acknowledges that the contract s entered nto ncorporatng the terms and condtons heren set out and t does not rely on and waves any clam for breach of any such representatons whch are not so confrmed. (c) Catalogues, prce lsts and other advertsng matter shall not form part of any contract between Sven plc and the purchaser. Any typographcal, clercal or other error, or error of omsson n any sales lterature, quotatons, prce lst or any other document or nformaton ssued by Sven plc shall not be bndng on Sven plc and shall be subject to correcton wthout lablty to Sven plc as vendor or provder. (d) No clams for loss or damage to furnture and goods, materals and purchaser s property, clams for bad workmanshp (save as set out below) or clams for furnture and goods nvoced but not receved, wll be consdered unless Sven plc s advsed n wrtng wthn 3 days from the date of fnal nvoce. In the event that a purchaser fals to gve the approprate notce and does not notfy Sven plc n wrtng wthn the specfed three day perod, the purchaser s clam wll deem to have been waved and the Purchaser wll be barred from makng any further or other clam n respect thereof. (e) Sven plc furnture s guaranteed for a perod of fve years aganst any defects resultng from faulty materals or workmanshp, or for three years n the case of movng parts, provded that: ) The furnture and goods have not been subjected to any unauthorsed repar or msused, abused or altered n any way whatsoever. ) The furnture and goods have been properly nstalled, connected and assembled (f such works were not carred out by Sven plc). ) Any fault or defect wth the furnture and/or goods s notfed n wrtng wthn three days of becomng evdent. v) The furnture and goods are returned approprately packaged, carrage pad, to Sven plc, unless expressly agreed otherwse by Sven plc. v) Sven plc shall be under no lablty n respect of any defect arsng from wear and tear, wlful damage, neglgence, abnormal usage or workng envronment, or falure to follow the manufacturer s or other provder s nstructons whether oral or n wrtng. v) Sven plc shall be under no lablty wth regard to any warranty or guarantee f the total prce of the furnture and goods was not pad by the due payment date as specfed n the Sven plc wrtten acceptance of the sad order. v) Subject as expressly provded for n these Terms and Condtons and except where the Furnture and goods are sold to a person dealng as a consumer (wthn the meanng of the Unfar Contract Terms Act 1977) all warrantes, condtons or other terms mpled by statute or common law are excluded to the fullest extent permtted by law. v) References to Purchaser shall mean n these terms and condtons the company entty or ndvdual orderng goods and furnture from Sven plc. 2. QUOTATIONS. Orders placed upon a quotaton whch has not been prevously wthdrawn are subject to confrmaton that Sven plc accepts t he same. Unless otherwse stated all prces quoted are deemed to be exclusve of VAT. Sven plc reserves wthout lablty, the rght to at any tme, reduce or wthdraw dscount terms and/or credt account facltes wthout notce, reference or explanaton to the Purchaser. 3. PRICES. Sven plc shall use reasonable endeavours to mantan prces quoted and/or detaled on ther order acknowledgement, but must reserve the rght to ncrease quoted prces accordng to any ncreases n costs whch take effect between acceptance and delvery/completon of the order or that part of the order remanng undelvered/ncomplete at the tme of such ncrease. In the event that the quoted prce ncludes elements of work n relaton to whch Sven plc has been unable, for whatever reason, to carry out a ste survey, or n the event that Sven plc s requred to carry out addtonal work not detaled n the orgnal quotaton, Sven plc reserves the rght to amend the quoted prce accordngly whereupon the prce payable by the Purchaser n relaton to the goods and furnture shall be adjusted accordngly. 4. TERMS OF PAYMENT. Payment shall be made to Sven plc at the tme and n the manner stated n the Sven plc quotaton or f no such tme and manner are stated then wthn 30 days of the date of nvoce. In all cases the prces quoted by Sven plc are strctly net. In the event of non-payment of the prce quoted, Sven plc reserve the rght to clam statutory nterest (8% p.a. over Bank of England base rate), compensaton and to recover debt recovery costs as provded for under the Late Payment of Commercal Debts (Interest) Act 1998 and the Late Payment of Commercal Debt Regulatons 2002. Prompt settlement dscounts are subject to payment wthn the terms set out heren or as specfed n any quotaton or specal terms offer. Sven plc reserve the rght to re-nvoce for the full pre-dscounted prce n the event of late or non-payment. The Purchaser shall not be enttled to wthhold payment as a result of any clam t may have aganst Sven plc and the Purchaser may not clam any rght of set off. 5. DELIVERY/COMPLETION. Sven plc wll use reasonable endeavours to delver/complete promptly but Sven plc shall be under no lablty whatsoever for delay n estmated delvery/ completon tmes or falure to delver/complete from any cause, nor for any loss or damage arsng therefrom. Sven plc reserve the rght to make partal delvery or delveres by nstalments and to nvoce for such delveres as are made. In no event wll Sven plc be lable for any acton of the purchaser s employees assstng n delvery. The purchaser wll ndemnfy Sven plc aganst all clams, proceedngs, demands and costs arsng therefrom. 6. OWNERSHIP OF FURNITURE AND GOODS. (a) The ttle and property n all furnture and goods and materals suppled by Sven plc does not pass to the Purchaser and/or Purchaser untl payment n full (for all furnture and goods whatsoever suppled) has been receved therefor by Sven plc, and rsk n respect of such furnture and goods passes to the purchaser from the moment of delvery to the purchaser s nomnated locaton. (b) Untl ttle n furnture and goods passes, the purchaser shall hold the furnture and goods as balee for Sven plc. These furnture and goods must be stored separately from all other furnture and goods, and be clearly marked as beng the property of Sven plc. (c) If payment of account s overdue (tme beng of the essence) or the purchaser becomes nsolvent, commences wndng up procedures, commts an act of bankruptcy or has a Recever or Admnstrator apponted, Sven plc may mmedately reclam and recover the furnture and goods, f necessary by enterng any premses owned or occuped by the purchaser. (d) If the purchaser sells the furnture and goods before ttle to these furnture and goods passes to hm the sale shall be made by the purchaser as fducary agent on behalf of Sven plc. The mones due to Sven plc for payment of furnture and goods from such sale must be kept separate to other mones and be clearly denoted as mones held n trust on behalf of Sven plc. Regardless of such agency the purchaser has no rght to bnd Sven plc and shall, as between the purchaser and hs customers, act as prncpal. 7. EXCLUSIONS. Lablty s expressly excluded n regard to equpment not manufactured by Sven plc or procured on behalf of the purchaser from a specalst suppler except to the extent that any beneft s obtanable from the wrtten guarantee of such a suppler or enforceable by Sven plc wthout legal or other expenses whatsoever and the beneft obtaned shall be passed to the purchaser. If furnture and goods are to be manufactured or provded n accordance wth a desgn/specfcaton provded by the purchaser, the purchaser shall ndemnfy Sven plc aganst all loss, damage, costs, expenses and lablty n connecton wth such desgn/specfcaton. Sven plc shall be under no lablty n respect of any defect n the furnture and goods or lack of ftness for purpose arsng from any drawng, desgn or specfcaton suppled by the Purchaser. 8. CANCELLATION/DELAY. Orders cannot be cancelled except wth Sven plc s consent and on terms whch wll ndemnfy Sven plc aganst all loss. If a purchaser extends or delays a contract or part thereof or fals to accept delvery of any furnture and goods at the tme agreed, or when notfed that the furnture and goods are avalable to be delvered, then the purchaser wll be lable for any and all losses ncurred by Sven plc, ncludng dsrupton, loss of proft, storage costs, addtonal transport and handlng costs resultng from the purchaser s actons. If a purchaser delays recept of delvery of any furnture and goods n excess of seven days from the date agreed, or when notfed that the furnture and goods are avalable to be delvered, the furnture and goods wll be nvoced, and payment n full shall be made by the Purchaser thrty days thereafter. For the avodance of doubt, once delvered to the Purchaser at the address notfed by the Purchaser to Sven plc or to the Purchaser s address specfed on any quotaton or order for such furnture and goods cannot be cancelled. 9. FORCE MAJEURE. If Sven plc s unable to perform any part of the order made by the Purchaser for a reason of force majeure or any other reason outsde ther reasonable control, Sven plc shall be enttled to charge the purchaser for any addtonal tme, cost or expense ncurred as a result thereof and where Sven plc s unable to perform any part of the contract for any such reason for a perod of more than one week, Sven plc shall be enttled to postpone ts performance of the contract untl such tme as t s reasonably able to recommence the contract. 10. TERMINATION. In the event that the purchaser fals to observe or perform any of ther oblgatons under the terms of the contract, Sven plc reserve the rght to termnate the contract forthwth by servce of wrtten notce of termnaton to the purchaser. 11. CONSEQUENTIAL LOSS. Sven plc shall not be lable to the purchaser by reason of any representaton, or any mpled warranty, condton or other term, or any duty at common law, or under the express terms of the Contract, for any consequental loss or damage (whether for loss of proft or otherwse), costs, expenses or other clams for consequental compensaton whatsoever (and whether caused by the neglgence of Sven plc, ts employees or agents or otherwse) whch arse out of or n connecton wth the supply of the furnture and goods or ther use or resale by the purchaser, except as expressly provded n these condtons. 12. THIRD PARTY CLAIMS. If any clam s made aganst the purchaser that the furnture and goods or servces nfrnge or that ther use, resale or provson nfrnges the patent, copyrght, desgn, trade mark or other ndustral or ntellectual property rghts of any other person, any lablty of Sven plc to the purchaser shall be subject to Sven plc beng gven full control of any proceedngs or negotatons n connecton wth any such clam ncludng the payment or settlement thereof. 13. EXPERTISE. The Purchaser hereby undertakes not to offer employment to or to employ or otherwse contract ether drectly or through a thrd party for the servces of any exstng employee of Sven plc or any former employee of Sven plc who has been an employee wthn the sx months pror to beng offered the employment or arrangement whereby the former employee of Sven plc would provde servce to or for the Purchaser, wthout frst obtanng the consent of Sven plc whether or not such employee has worked or served drectly the needs of the Purchaser whlst he or she was an employee of Sven plc. If the Purchaser breaches the precedng provson Sven plc shall be enttled to demand and be pad lqudated damages by the Purchaser. Such sum to be determned by an arbtrator apponted by the Chartered Insttute of Arbtrators. 14. DISPUTE PROCEDURE: Any dspute arsng out of or n connecton wth these terms and condtons shall be referred to and fnally resolved by arbtraton under the Controlled Cost Rules of the Chartered Insttute of Arbtrators, and these Rules are deemed to be ncorporated heren. 15. RIGHTS. Falure by Sven plc to enforce any of the contract terms cannot be construed as a waver of any of ts rghts under ths contract. No waver by Sven plc or any breach of the Contract by the Purchaser shall be consdered as a waver of any subsequent breach of the same or any other provson. If any provson of these condtons s held by any competent authorty to be nvald or unenforceable n whole or n part, the valdty of the other provsons of these Condtons and the remander of the provson n queston shall not be affected thereby. 16. GOVERNING LAW. The Laws relatng to England shall apply to any quotaton or order and the terms and condtons specfed heren shall be construed and operate under Englsh Law. Terms and Condtons of Sale, revsed August 2011. X-Range Prce Lst January 2018 55
Head Offce and Showroom Court Barn, Lttleton Lane, Guldford, Surrey GU3 1HW Tel: 01483 302728 Fax: 01483 569903 Emal: nfo@sven.co.uk Factory, Showroom, Sales and Customer Servce Departments 21 Frst Avenue, The Pensnett Estate, Kngswnford, West Mdlands DY6 7TU Tel: 01384 400120 Fax (sales/servce): 01384 404620 Emal: sales@sven.co.uk London Desgn Studo 111 Charterhouse Street, London EC1M 6AW Tel: 020 7436 4777 Fax: 020 7631 4666 Emal: london@sven.co.uk Cumbernauld Showroom 5 Md Road, Blarlnn Industral Estate, Cumbernauld G67 2TT Tel: 01236 808011 Emal: scotland@sven.co.uk sven.co.uk 2018 Sven Chrstansen plc XRange-PrceLst-0118-01