Decentralized Serial Wiring (GW System, Branches) Series EX00 Valve manifold and input unit manifold can be connected around the GW unit. ompatible with various protocols by replacing the GW unit. ompatible with -digital-outputs ( points x branches) and -digital-inputs ( points x branches). GW unit, Input unit manifold: Valve manifold including SI unit: IP SI unit GW unit Input unit SI unit VQ000 000 000 Position Detection Switch Flow Sensor Pressure ontrol Pressure Sensor Input unit SV000/000/000/000 Alphabetical Index Length Measuring/ ounter educed-wiring Fieldbus System Static Electricity Elimination Equipment
Decentralized Serial Wiring (GW System, Branches) Series EX00 GW Unit How to Order GW Unit EX00 G DN ommunication protocol DN DeviceNet PA POFIB DP MJ -Link EN EtherNet/IP GW Unit Specifications ommunication Model Applicable system ommunication speed onfiguration file Note ) I/O occupation area (Inputs/Outputs) Terminating resistor Protocol Version Note ) Power For unit supply voltage For sensors For valve Internal current consumption (Unit) Number of inputs onnection input device Supply voltage Supply current Number of outputs onnection output device Supply voltage Supply current Output Input Branch cable length Operating humidity range Environment EX00-GDN EX00-GPA EX00-GMJ EX00-GEN DeviceNet POFIB DP -Link EtherNet/IP elease.0 DP-V0 Ver..0 elease.0 k/0 k/00 kbps 9. k/9. k/. k/ 9. k/. k/00 k/. M/ M/ M/ Mbps GSD file k/ k/. M/ M/0 Mbps 0M/00 Mbps EDS file EDS file 9/9 / / ( stations, remote device station) / Built into the unit Not provided Not provided (Switch setting) to VD (Supplied by DeviceNet VD±0% circuit, 0 ma or less) VD±0% VD±0%/ % 00 ma or less (GW unit) inputs ( inputs x branches) The EX00 series input unit manifold (connection from communication port A to D) VD Max.. A (Max. 0. A per branch) outputs ( outputs x branches) The EX00 series SI unit manifold (connection from communication port A to D) VD Max..0 A (Max. 0. A per branch) m or less between connected devices (total extension 0 m or less) Operating: to Stored: to 0 (with no freezing and condensation) Operating, Stored: to %H (with no condensation) 000 VA for minute between whole live part and enclosure MΩ or more (00 VD mega meter) between whole live part and enclosure E marking, UL (SA) 0 g Accessory: Waterproof cap (for M connector socket) EX00-AWTS ( pcs.) EX00-AWTS ( pcs.) EX00-AWTS ( pcs.) EX00-AWTS ( pcs.) Note ) Please note that the version is subject to change. Note ) Each file can be downloaded from SM s website (http://www.smcworld.com). Note ) For detailed specifications other than the above, refer to the operation manual that can be downloaded from SM s website (http://www.smcworld.com).
IN OUT B LINK MS NS SOL PW SOL L UN L E. PE IN OUT B LAN PW LINK 00 MS NS UN SOL BF DIA PE Decentralized Serial Wiring (GW System, Branches) Series EX00 GW Unit Dimensions/Parts Description EX00-GDN(DeviceNet ) ommunication connector (M, pins, plug) Power supply connector Note ) Note ) Marker: EX00-GMJ(-Link) LINK IN (M, pins, plug) LINK OUT (M, pins, socket) Power supply connector Note ) VD Note ) Marker: Bus adapter OM A 0 0 OM B GATEWAY UNIT EX00 SEIES VD OM A OM B OM OM D GATEWAY UNIT EX00 SEIES OM OM D PE Switch protective Switch protective cover EX00-GPA(POFIB DP) cover x M (mounting hole) ommunication x M (mounting hole) connector M M Ground terminal (M, pins, plug Ground terminal reverse key) 0 0 BN-WH (Made by PHOENIX ONTAT). Switch protective cover x M (mounting hole) M Ground terminal BN-WH (Made by PHOENIX ONTAT). 9. or less ommunication connector (M, pins, socket reverse key) Power supply connector Note ) Note ) EX00-GEN(EtherNet/IP ) ommunication connector (M, pins, socket type D) Power supply connector Note ) VD Note ) OM A 0 OM B GATEWAY UNIT EX00 SEIES VD OM A OM B OM OM D 0 GATEWAY UNIT EX00 SEIES OM OM D PE 0 x M (mounting hole) M Ground terminal 0 9.9. Marker: BN-WH (Made by PHOENIX ONTAT) Switch protective cover Marker: BN-WH (Made by PHOENIX ONTAT) Position Detection Switch Flow Sensor Pressure ontrol Pressure Sensor educed-wiring Fieldbus System Note ) Power supply connector specification (M, pins, plug) Note ) specification (M, pins, socket) Alphabetical Index Length Measuring/ ounter Static Electricity Elimination Equipment
VD/0mA/ VD/0mA/ VD/0mA/ EX00-IE VD/0mA/ IP ODE IP ODE IP ODE IP ODE VD/0mA/ VD/0mA/ VD/0mA/ IP ODE IP ODE Series EX00 Input Unit Manifold How to Order Input Manifold EEX00 IB onnector type E M connector T M connector M M, M mixed E Stations station stations How to Order Input Block EX00 IE Block type M connector, inputs, PNP specifications M connector, inputs, NPN specifications M connector, inputs, PNP specifications M connector, inputs, NPN specifications M connector, points integrated type, PNP specifications M connector, points integrated type, NPN specifications For options, refer to pages 0 to. Input unit (M connector) (M connector) DIN rail End block points integrated type input block (M connector) How to Order Input Unit Manifold [Ordering Example] When ordering an input unit manifold, enter the Input manifold part no. + part no.. The Input unit, End block and DIN rail are included in the input manifold. efer to the indications below. Block part no. entry Input unit side End block side Example ) M input block only Input manifold Input unit side EEX00-IB-E ( set) EX00-IB VD/0mA INPUT IP ODE SEIALNo. EX00-IE VD/0mA IP ODE SEIALNo. EX00-IE VD/0mA IP ODE SEIALNo. EX00-IE ( sets) EEX00-IB-E... set EX00-IE... sets End block side Example ) M input block only Input manifold Input unit side EEX00-IB-T ( set) EX00-IB VD/0mA INPUT IP ODE SEIALNo. VD/0mA VD/0mA VD/0mA VD/0mA EX00-IE ( sets) EEX00-IB-T... set EX00-IE... sets End block side Input unit side EX00-IB VD/0mA INPUT IP ODE SEIALNo. Input unit side EX00-IB VD/0mA INPUT IP ODE SEIALNo. EX00-IE VD/0mA IP ODE SEIALNo. VD/0mA/ VD/0mA/ VD/0mA/ VD/0mA/ VD/0mA/ Input manifold EEX00-IB-E ( set) VD/0mA/ ( sets) Input manifold EEX00-IB-E ( set) EX00-IE ( set) ( sets) EEX00-IB-E... set... sets End block side EEX00-IB-E... set EX00-IE... set... sets End block side Example ) M, M mixed Input manifold Input unit side EEX00-IB-M ( set) EX00-IB VD/0mA INPUT IP ODE SEIALNo. VD/0mA VD/0mA ( sets) ( sets) EEX00-IB-M... set... sets... sets End block side Note) Since the points integrated type input block is equivalent to the length of four stations on an M input block, pay attention to the number of stations on an input manifold. When an input block layout becomes complicated, indicate in the input unit manifold specifications sheet.
Decentralized Serial Wiring (GW System, Branches) Series EX00 Input Unit Specifications Model Internal current consumption Number of inputs onnection block Input onnection block stations Environment Operating humidity range Input Block Specifications EX00-IB 00 ma or less inputs The EX00 series input block (mixed combination is possible) -input, input block: Max. stations -input, input block: Max. stations Operating: to Stored: to 0 (with no freezing and condensation) Operating, Stored: to %H (with no condensation) 000 VA for minute between whole live part and enclosure MΩ or more (00 VD mega meter) between whole live part and enclosure E marking, UL (SA) 00 g (Input unit + End block) Model EX00-IE EX00-IE EX00-IE EX00-IE Input type PNP sensor input NPN sensor input PNP sensor input NPN sensor input PNP sensor input NPN sensor input Number of inputs inputs inputs Input Input device supply voltage Input device supply current ated input current Display VD Max. 0 ma/input unit manifold Approx. ma Green LED (Lights up when power is turned ON.) onnector on the input device side M connector ( pins, plug) M connector ( pins, plug) M connector ( pins, plug) Environment Operating humidity range Operating: to Stored: to 0 (with no freezing and condensation) Operating, Stored: to %H (with no condensation) 000 VA for minute between whole live part and enclosure MΩ or more (00 VD mega meter) between whole live part and enclosure E marking, UL (SA) Accessory: Waterproof cap (for M connector socket) (for M connector socket) 0 g EX00-AWES ( pcs.) 0 g EX00-AWTS ( pcs.) g EX00-AWES ( pcs.) Note) For detailed specifications other than the above, refer to the operation manual that can be downloaded from SM s website (http://www.smcworld.com). Alphabetical Index Position Detection Switch Flow Sensor Pressure ontrol Pressure Sensor educed-wiring Fieldbus System Length Measuring/ ounter Static Electricity Elimination Equipment
INPUT IP ODE SEIAL NO. VD/0mA INPUT IP ODE SEIAL NO. VD/0mA VD/0mA IP ODE VD/0mA IP ODE VD/0mA/ VD/0mA/ TYPE TYPE IP ODE VD/0mA IP ODE VD/0mA/ TYPE VD/0mA VD/0mA/ TYPE IP ODE VD/0mA/ TYPE VD/0mA VD/0mA/ TYPE IP ODE VD/0mA VD/0mA/ TYPE IP ODE VD/0mA/ TYPE VD/0mA IP ODE VD/0mA Series EX00 Input Unit Manifold Dimensions/Parts Description (M) only (M, pins, plug) onnector for input device connection (M, pins, socket) (Pitch) P = DIN rail 9. L L (ail mounting pitch:.) L (L) Marker: BN-WH (Made by PHOENIX ONTAT). EX00-IB (.). 9. Stations ail length L Mounting pitch L Manifold length L L 9. 0. 00. 0... 0 9 0.. (mm).... (M) only (M, pins, plug) onnector for input device connection (M, pins, socket) (Pitch) P = 0 DIN rail 0. Position indicator LED L L (ail mounting pitch:.) L (L) Marker: BN-WH (Made by PHOENIX ONTAT). EX00-IB (.)..9 Stations ail length L Mounting pitch L Manifold length L L 0. 00.... 0.. 0. 00 (mm).. 0..
Decentralized Serial Wiring (GW System, Branches) Series EX00 Input Unit Manifold Exploded View w r a q Parts List No. Description Part no. For standard Note Input unit (M connector) (M connector) (M connector) points integrated type End block DIN rail EX00-IB EX00-IE EX00-IE EX00-IE EX00-EB VZ000--- PNP specifications... :, NPN specifications... : PNP specifications... :, NPN specifications... : PNP specifications... :, NPN specifications... : : No. based on L dimension (efer to the table below.) How to add input block stations z Loosen the screws ( places) that hold the end block. x Separate the blocks at the locations where stations are to be added. c Attach the additional blocks to the DIN rail, and connect the blocks so that they fit together securely. v While holding the blocks together so that there are no gaps between them, secure them to the DIN rail by tightening the screws. Note: Be sure to tighten the round head combination screw with the prescribed tightening torque. (0. N m) y e a t Position Detection Switch Flow Sensor Pressure ontrol Pressure Sensor educed-wiring Fieldbus System Static Electricity Elimination Equipment DIN ail L Dimension [mm] M input block (m) Stations 0 0 0 9 0 9 9 0 0 9 0 onnector type For M (m + n = to ) onnector type For T (n = to ) M input block (n) onnector type For E (m = to ) L dimension No. L dimension No. L dimension 0 9 0.. 0. 9 0. 9 0.. Length Measuring/ ounter Alphabetical Index
Series EX00 SI Unit SV000/000/000/000 How to Order SI Unit EX00 S00 Applicable solenoid valve: Series SV PW OM For options, refer to pages 0 to. D D D D D D SI Unit Specifications (EX00-S00) Model Internal current consumption Number of outputs Output type EX00-S00 00 ma or less outputs NPN (Positive common) Positive common compatible Output onnection block Solenoid valve (single, double) elay output module ( ouput, outputs) Environment onnection block stations onnection block supply current Operating humidity range Double solenoid valve, relay output module ( outputs): Max. stations Single solenoid valve, relay output module ( output): Max. stations Max. 0. A IP Operating: to Stored: to 0 (with no freezing and condensation) Operating, Stored: to %H (with no condensation) 000 VA for minute between whole live part and enclosure MΩ or more (00 VD mega meter) between whole live part and enclosure E marking, UL (SA) g Accessory: Waterproof cap (for M connector socket) EX00-AWTS ( pc.) Note) For detailed specifications other than the above, refer to the operation manual that can be downloaded from SM s website (http://www.smcworld.com). SI Unit Dimensions/Parts Description EX00-S00 9... (M, pins, socket).. 9 (M, pins, plug)
EX00 series EX00 series Decentralized Serial Wiring (GW System, Branches) Series EX00 SI Unit SY000/000 VQ000/000/000 Note) SY000/000, VQ000/000/000, S000 are not yet UL-compatible. SI Unit Specifications (EX00-Q 0 ) Output specifications onnection block stations S000 How to Order SI Unit EX00 Q 0 0 Applicable solenoid valve: Series SY/VQ/S000 Output specifications 0 NPN (Positive common) PNP (Negative common) SI unit type For without EX9 output block For EX9 output block mounting For options, refer to pages 0 to. Model EX00-Q00 EX00-Q0 EX00-Q00 EX00-Q0 Internal current consumption 00 ma or less Number of outputs points Output type NPN (Positive common) PNP (Negative common) NPN (Positive common) PNP (Negative common) onnection block Positive common compatible Positive common compatible Negative common compatible Negative common compatible Note ) Output block, power block Output block, power block Solenoid valve (single, double) Solenoid valve (single, double) Solenoid valve (single, double) Solenoid valve (single, double) Double solenoid valve: Max. stations Single solenoid valve: Max. stations Double solenoid valve, output block: Max. stations Single solenoid valve: Max. stations Power block is not included. onnection block supply current Max. 0. A IP Operating: to Stored: to 0 (with no freezing and condensation) Environment Operating humidity range Operating, Stored: to %H (with no condensation) 000 VA for minute between whole live part and enclosure MΩ or more (00 VD mega meter) between whole live part and enclosure E marking, UL (SA) 0 g Accessory: Waterproof cap (for M connector socket) EX00-AWTS ( pc.) Note ) For details of output block and power block, refer to page 0. Note ) For detailed specifications other than the above, refer to the operation manual that can be downloaded from SM s website (http://www.smcworld.com). Position Detection Switch Flow Sensor Pressure ontrol Pressure Sensor educed-wiring Fieldbus System SI Unit Dimensions/Parts Description EX00-Q 0 PW OM EX00-Q 0 SI UNIT PW OM EX00 series x M (mounting hole) Static Electricity Elimination Equipment. 0. 0 0 (M, pins, socket) (M, pins, plug) 0.. 0 0 (M, pins, socket) (M, pins, plug) Length Measuring/ ounter Alphabetical Index. 9
Series EX00 Options Output block/ Power block Features: Possible to retrofit to the valve manifold, using the unused points. -output/-output block (M connector) Positive/Negative common available as standard. Possible to drive by up to 0. A per a point. (EX9-OEP ) Output block Power block How to Order Output Block EX9 OE T Output specifications PNP (Negative common) NPN (Positive common) Power supply type Internal power supply method T (for low-wattage load) Integrated power supply method P (for high-wattage load) Note) Note) equired to connect with a power block. How to Order Power Block EX9 PE Option/Part No. Description Part no. Note Waterproof cap efer to page. EX00-AWTS When ordering separately: 0 pcs. Power cable with efer to page, EX9-A - connector Order separately. SI Unit Part No. SI unit part no. Output Applicable model EX00-Q00 EX00-Q0 PNP (Negative common) NPN (Positive common) EX9-OET, EX9-OEP EX9-OET, EX9-OEP Option/Part No. Description Waterproof cap able with connector EX9-A - for output entry Power block EX9-PE Applicable model Part no. OET OEP EX00-AWTS Note efer to page. Order separately: 0 pcs. efer to page. Order separately. efer to the right page. Order separately. 0
Decentralized Serial Wiring (GW System, Branches) Series EX00 Output Block Specifications Model EX9-OET EX9-OET EX9-OEP EX9-OEP Output connector Internal current consumption Output type Number of outputs Power supply method Output Output device supply voltage Output device supply current Display Environment onnector on the output device side Operating humidity range Internal power supply method Max. ma/point (.0 W/point) Note) M connector ( pins) 0 ma or less PNP (Negative common) NPN (Positive common) PNP (Negative common) NPN (Positive common) Note) The rated load current varies due to the output capability of the SI unit when connected to EX00. outputs VD Yellow LED (Lights up when power is turned ON.) M connector ( pins, plug) IP 0 to 0 to %H (with no condensation) 00 VA for min. between whole external terminal and FG 0 MΩ or more (00 VD) between whole external terminal and FG E marking, UL (SA) 0 g Integrated power supply method (Power block: supplied from EX9-PE) Max. 0. A/point ( W/point) Power Block Specifications Model EX9-PE onnection block onnection block stations Output block (for high-wattage load) Output block: Max. stations Power supply for output and internal control Supply current Environment Power supply voltage Internal power consumption Operating humidity range. to. VD 0 ma or less Max.. A (When using with.0 to. A, the ambient temperature should not exceed 0, and do not bundle the cable.) IP 0 to 0 to %H (with no condensation) 00 VA for min. between whole external terminal and FG 0 MΩ or more (00 VD) between whole external terminal and FG E marking, UL (SA) 0 g Accessory: Waterproof cap (for M connector socket) EX00-AWTS ( pc.) Note) For detailed specifications other than the above, refer to the operation manual that can be downloaded from SM s website (http://www.smcworld.com). Alphabetical Index Position Detection Switch Flow Sensor Pressure ontrol Pressure Sensor educed-wiring Fieldbus System Length Measuring/ ounter Static Electricity Elimination Equipment
Series EX00 Options Output Block Dimensions Power Block Dimensions. 0. PW. 9.. onnector for output device connection (M, pins, socket). 9.. Power supply connecor (unused) Power supply input connector (M, pins, plug, reverse keyway).... We sell this product individually. Please place an order separately. You are requested to connect it to an SI unit and a valve manifold. When using the output block only (valve manifold is unused.), place an order for an end plate ( EX9-EA0) separately for connection. efer to the operation manual for connection, wiring, installation, option and cable, etc. End plate EX9 EA0 0. 0. x M (mounting hole)