whitedriveproducts SERIES 125-126 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WM
WM (ll Series) For Light Duty pplications whitedriveproducts overview The WM product line with spool valve design is an economical motor with enhanced rotor technology. Intended for light-duty applications, the WM series offers many advantages such as compact size, high speed, medium torque and extreme low weight. The WM series motors are used primarily in the mobile, industrial and agricultural markets. SerieS descriptions 125/126 - Hydraulic Mini Motor Standard features / benefits Built-in check valves offer versatility and increased seal life. Bolt-on mounting flange relates to easy serviceability. Spool valve design gives superior performance and smooth operation over a wide speed and torque range. Enhanced rotor design provides smooth performance, compact volume and low weight. typical applications agriculture equipment, conveyors, carwashes, sweepers, food processing, grain augers, spreaders, feed rollers, augers, brush drives and more SpecificationS CODE Displacement cm 3 [in 3 /rev] Speed Flow Torque Pressure rpm lpm [gpm] Nm [lb-in] bar [psi] cont. inter. cont. inter. cont. inter. cont. inter. peak 008 8.4 [0.5] 1864 2293 16 [4] 20 [5] 100 [1450] 140 [2030] 200 [2900] 012 13.1 [0.8] 1521 1871 20 [5] 25 [7] 17 [150] 22 [195] 100 [1450] 140 [2030] 200 [2900] 020 20.1 [1.2] 989 1229 20 [5] 25 [7] 26 [230] 34 [301] 100 [1450] 140 [2030] 200 [2900] 032 31.8 [1.9] 622 767 20 [5] 25 [7] 40 [354] 55 [487] 100 [1450] 140 [2030] 160 [2320] 040 40.2 [2.5] 495 620 20 [5] 25 [7] 49 [434] 64 [566] 100 [1450] 140 [2030] 160 [2320] Performance data is typical. Performance of production units varies slightly from one motor to another. Running at intermittent ratings should not exceed 10% of every minute of operation. 1(800)264-9571 002 www.cenhyd.com
whitedriveproducts WM (ll Series) For Light Duty pplications displacement performance 008 30 [435] 50 [725] 70 [1015] 100 [1450] 120 [1740] 140 [2030] 8 cm 3 [0.5 in 3 ] / rev 2 [0.5] 4 [1] 8 [2] 12 [3] 16 [4] 20 [5] 3 [25] 3 [25] 5 [41] 4 [35] 4 [35] 7 [58] 6 [53] 8 [71] 13 [115] 226 476 915 1390 1864 2293 219 455 893 1366 1847 2277 196 435 850 1328 1815 2272 166 402 816 1292 1792 2245 141 384 778 1268 1771 2190 117 351 237 474 949 1423 1898 2372 3.3 [.130] 4 [36] 7 [59] 9 [83] 13 [119] 17 [148] 19 [166] Performance data is typical. Performance of production units varies slightly from one motor to another. 012 30 [435] 50 [725] 70 [1015] 100 [1450] 120 [1740] 140 [2030] 13 cm 3 [0.8 in 3 ] / rev 3 [0.8] 5 [1.3] 10 [2.6] 15 [4.0] 20 [5.3] 25 [6.6] 6 [53] 4 [35] 3 [27] 8 [71] 8 [71] 6 [53] 13 [115] 17 [150] 17 [150] 19 [168] 19 [168] 17 [150] 19 [168] 22 [195] 21 [186] 21 [186] 220 367 757 1134 1521 1871 212 362 748 1124 1511 1858 195 351 728 1106 1498 1850 176 320 703 1072 1480 1840 304 659 1049 1449 1793 609 1026 1413 230 383 766 1149 1533 1916 5.2 [.205] 6 [55] 10 [92] 15 [129] 21 [184] 25 [221] 29 [257] 020 30 [435] 50 [725] 70 [1015] 100 [1450] 120 [1740] 140 [2030] 20 cm 3 [1.2 in 3 ] / rev 3 [0.8] 5 [1.3] 10 [2.6] 15 [4.0] 20 [5.3] 25 [6.6] 8 [12] 8 [71] 6 [29] 4 [35] 13 115] 13 [115] 13 [115] 25 [221] 26 [230] 25 [221] 24 [212] 22 [195] 31 [274] 29 [257] 29 [257] 28 [248] 26 [230] 34 [301] 34 [301] 33 [292] 31 [274] 143 241 489 731 989 1229 133 233 479 714 974 1216 133 223 470 692 962 1224 204 454 670 941 1182 185 454 648 941 1132 454 613 941 1104 149 248 497 745 994 1242 8.0 [.316] 10 [85] 22 [199] 32 [284] 38 [336] 45 [397 www.cenhyd.com 1(800)264-9571 003
WM (ll Series) For Light Duty pplications whitedriveproducts performance 032 30 [435] 50 [725] 70 [1015] 100 [1450] 120 [1740] 140 [2030] 32 cm 3 [1.9 in 3 ] / rev 3 [0.8] 5 [1.3] 10 [2.6] 15 [4.0] 20 [5.3] 25 [6.6] 84 21 [186] 20 [177] 19 [168] 28 [248] 28 [248] 28 [248] 26 [230] 24 [212] 39 [345] 40 [354] 38 [336] 35 [310] 46 [407] 44 [389] 42 [372] 42 [372] 55 [487] 52 [460] 51 [451] 48 [425] 148 301 456 622 767 139 293 448 610 754 113 284 437 601 741 269 423 589 718 254 412 547 679 234 396 514 633 94 157 314 472 629 786 12.7 [.501] 15 [134] 25 [224] 35 [314] 51 [448] 61 [538] 71 [627] Performance data is typical. Performance of production units varies slightly from one motor to another. 040 30 [435] 50 [725] 70 [1015] 100 [1450] 130 [1885] 140 [2030] 40 cm 3 [2.5 in 3 ] / rev 3 [0.8] 5 [1.3] 10 [2.6] 15 [4.0] 20 [5.3] 25 [6.6] 15 [133] 71 25 [221] 24 [212] 24 [212] 22 [195] 33 [292] 35 [310] 34 [301] 33 [292] 29 [257] 47 [416] 49 [434] 48 [425] 44 [389] 54 [478] 53 [469] 52 [460] 50 [443] 64 [566] 62 [549] 59 [522] 58 [513] 116 238 367 495 620 110 237 359 487 609 102 224 354 479 602 209 345 465 576 167 300 434 558 142 277 416 528 75 124 249 373 498 622 16.0 [.631] 19 [170] 32 [283] 45 [397] 64 [567] 83 [736] 90 [793] 1(800)264-9571 004 www.cenhyd.com
whitedriveproducts WM (125/126 Series) Light Duty Hydraulic Motor housings Dimensions shown are without paint. Paint thickness can be up to 0.13 [.005]. 3-HOLE, ROUND MOUNT, LIGNED SIDE PORTS JKB G 3/8 JK5 9/16-18 UNF JLB G 3/8 JL5 9/16-18 UNF 61 [2.40] Ø 45 [1.77] 35 [1.378] 12.2 [.478] 63 [2.48] B Ø 60 [2.36] 31.5 [1.240] 31.4 [1.238] 30 [1.20] 45 15 [.60] JKB, JK5 - (3) M6 x 1, Min. Depth 10 [.394] JLB, JL5 - (3) 1/4-28 UNF, Min. Depth 10 [.394] Drain Port: JKB, JLB - G 1/8 JK5, JL5-3/8-24 UNF 3-HOLE, ROUND MOUNT, LIGNED END PORTS JMB G 3/8 JM5 9/16-18 UNF JNB G 3/8 JN5 9/16-18 UNF Ø 45 [1.77] 35 [1.378] 4 [.157] 10.5 [.413] 15.2 [.598] B 45 Ø 60 [2.36] 31.5 [1.240] 31.4 [1.238] 15.2 [.598] JKB, JK5 - (3) M6 x 1, Min. Depth 10 [.394] JLB, JL5 - (3) 1/4-28 UNF, Min. Depth 10 [.394] Drain Port: JKB, JLB - G 1/8 JK5, JL5-3/8-24 UNF 2-HOLE FLNGE MOUNTING KIT (OPTIONL) length & weight chart 74 [2.894] 9.2 [.362] 8.8 [.346] 97 [3.82] 63.0 [2.480] 63.0 [2.478] 2 [.08] 31.7 [1.246] 31.5 [1.240] 5.5 [.217] 63.4 [2.496] 63.0 [2.480] Dimension is the overall motor length from the rear of the motor to the mounting flange surface and is referenced on detailed housing drawings above. # 008 012 020 032 040 Length mm [in] 106 [4.16] 108 [4.23] 110 [4.34] 115 [4.53] 118 [4.66] Weight kg [lb] 2.2 [4.8] 2.2 [4.9] 2.3 [5.0] 2.3 [5.1] 2.4 [5.2] 45 Ø 45 [1.77] 80 [3.15] (3) 6.7 [.264] Thru holes 2 [.08] Reference part number 125017004 when ordering the 2-Hole flange mounting kit. The kit contains three M6 and three 1/4 bolts to accomodate either thread type. www.cenhyd.com 1(800)264-9571 005
WM (125/126 Series) Light Duty Hydraulic Motor whitedriveproducts Shaft & technical information C3 5/8 Straight permissible Shaft Seal pressure 4.8 [.190] 4.8 [.188] 29 [1.14] 28 [1.10] 19.4 [.762] 19.1 [.750] The curve below represents allowable seal pressure at various speeds. Operation in the gray area results in maintaining the rated life of the shaft seal. ctual shaft seal pressure depends on motor configuration. 80 [1160] 17.9 [.705] 17.8 [.700] 4.8 [.190] 4.8 [.188] Ø15.9 [.625] Ø15.9 [.624] 1/4-28 UNF-2B 14 [.55] Min.deep 60 [870] 40 [580] 20 [290] Intermittent Continuous C4 16mm Straight 5.0 [.200] 5.0 [.196] 29 [1.14] 28 [1.10] 16.5 [.650] 16.2 [.638] bar [psi] 0 100 200 300 400 500 600 700 800 900 1000 rpm With check valves and drain connection, the shaft seal pressure equals pressure in the drain line. With check valves and no drain connection, shaft seal pressure is identical to output pressure. permissible Shaft Side load / axial load 18.0 [.710] 17.9 [.704] Ø16.0 [.630] 20 [.79] 5.0 [.200] 5.0 [.196] M6 x 1 14 [.55] Min.deep C5 16mm, 9 Tooth Spline 16 [.63] 14 [.55] 29 [1.14] 28 [1.10] P rad. = 1600 N [360 lbf] Ø16.5 [.650] Ø16.4 [.645] thrust load M6 x 1 14 [.55] Min.deep 80 dan [180 lb] 80 dan [180 lb] 1(800)264-9571 006 www.cenhyd.com
whitedriveproducts WM (125/126 Series) Light Duty Hydraulic Motor 125 & 126 SerieS model code builder 1 2 3 4 5 6 7 8 1. CHOOSE SERIES DESIGNTION 4. SELECT SHFT OPTION 125 Clockwise Rotation 126 Counterclockwise Rotation C3 C4 5/8 Straight 16mm Straight C5 16mm, 9 Tooth Spline 5. SELECT PINT OPTION B Black Black, Unpainted Mounting Surface The 125 & 126 series are bi-directional. Reversing the inlet hose will reverse shaft rotation. 2. SELECT DISPLCEMENT OPTION 008 8 cm 3 /rev [0.5 in 3 /rev] 032 32 cm 3 /rev [1.9 in 3 /rev] 012 13 cm 3 /rev [0.8 in 3 /rev] 040 40 cm 3 /rev [2.5 in 3 /rev] 020 20 cm 3 /rev [1.2 in 3 /rev] 3. SELECT MOUNT & PORT OPTION JKB 3-Hole, M6 Round Mount, Side Ports, G 3/8 JK5 3-Hole, M6 Round Mount, Side Ports, 9/16-18 UNF JLB 3-Hole, 1/4 Round Mount, Side Ports, G 3/8 JL5 3-Hole, 1/4 Round Mount, Side Ports, 9/16-18 UNF JMB 3-Hole, M6 Round Mount, End Ports, G 3/8 JM5 3-Hole, M6 Round Mount, End Ports, 9/16-18 UNF JNB 3-Hole, 1/4 Round Mount, End Ports, G 3/8 JN5 3-Hole, 1/4 Round Mount, End Ports, 9/16-18 UNF 6. SELECT VLVE CVITY / CRTRIDGE OPTION None 7. SELECT N DD-ON OPTION Standard 8. SELECT MISCELLNEOUS OPTION None www.cenhyd.com 1(800)264-9571 007
North merica White Drive Products, Inc. P.O. Box 1127 Hopkinsville, KY. US 42241 Phone: +1.270.885.1110 Fax: +1.270.886.8462 infousa@whitedriveproducts.com Europe White Drive Products GmbH Mannsnetterstrasse 34 D-88145 Opfenbach, Germany Phone: +49.8385.924988.0 Fax: +49.8385.924988.9 infoeu@whitedriveproducts.com sia White (China) Drive Products Co., Ltd. 1-8 Ning Zhen Gong Lu Zhenjiang, 212021, Jiangsu, China Phone: +86 511 85729988 Fax: +86 511 85728950 infochina@whitedriveproducts.com Delivering The Power To Get Work Done! whitedriveproducts 1(800)264-9571 008 www.cenhyd.com