TAKING SAFETY FURTHER

Similar documents
EXPLOSION PROOF. Diesel Engines For Hazardous Areas

ENGINES AND EQUIPMENT FOR HAZARDOUS AREAS

EXPLOSION PROOF. Diesel Engines For Hazardous Areas

Power Rating Minimum Rating 116 bkw 156 bhp Maximum Rating 205 bkw 275 bhp. 105 mm (4.1 in) 135 mm (5.3 in)

Power Rating Minimum Rating 429 bkw 575 bhp Maximum Rating 470 bkw 630 bhp Rated Speed

Power Rating Minimum Power 218 bkw 292 bhp Maximum Power 359 bkw 482 bhp mm (5.4 in) mm (6.5 in)

Bore 145 mm 5.71 in Stroke 162 mm 6.38 in Displacement 32.1 L in 3 Twin Turbocharged-Aftercooled (TTA) Compression Ratio 15.0:1 67.

Power Rating Minimum Power 429 bkw 575 bhp Maximum Power 597 bkw 800 bhp. 145 mm (5.71 in) 183 mm (7.2 in)

C18 ACERT Industrial Engine Tier 3/Stage IIIA 429 bkw/ rpm

C18 ACERT Industrial Engine Tier 3/Stage IIIA 470 bkw/ rpm

Power Rating Minimum Power 746 bkw 1000 bhp Maximum Power 895 bkw 1200 bhp. Emission Standards U.S. EPA Tier 4 Final

Generator Set Configurations Low Fuel Consumption, EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2447 bhp) 1825 bkw

Minimum Power 168 bkw 225 bhp Maximum Power 224 bkw 300 bhp. Emission Standards China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

General Installation Factors Affecting Engine Performance Engine Installation... 8

Miretti Engine Explosion Protection Systems

3516B SPECIFICATIONS. Lube System. gear type oil pump, gear type scavenge oil pump Dual Caterpillar A-III electronic engine control, Mounting System

: see performance curve rev. A : suction 900 mm / discharge 700 mm

Power Generation for the Offshore Oil & Gas Industry. C175 Offshore Generator Set

Power Generation for the Petroleum Industry C175 Offshore Drilling Module

Power Rating Minimum Power 1506 bkw 2100 bhp Maximum Power 1506 bkw 2100 bhp

Power Solutions. Cat Generator Sets for Petroleum Applications

Industrial CATERPILLAR ENGINE SPECIFICATIONS FEATURES. 612 bkw / 820 bhp rpm

C18 ACERT Industrial Engine Tier bkw/ rpm

LONGER LIFE. LOWER COST. D6T REBUILD OPTIONS

C15 ACERT Industrial Engine Tier 3/Stage IIIA 328 bkw/ rpm

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2200 bhp) 1641 bkw

EPA Tier 4 and the Electric Power Industry

offshore power Caterpillar Global Petroleum

Power Rating Minimum Power 250 bkw 335 BHP Maximum Power 340 bkw 456 BHP

C32 ACERT Generator Set Electric Power

Power Rating Minimum Power 761 bkw 1020 bhp Maximum Power 1119 bkw 1500 bhp mm (68 in) 190 mm (7.5 in)

C11 ACERT Industrial Engine Tier 3/Stage IIIA 242 bkw/ rpm

C13 ACERT Industrial Engine Tier 3/Stage IIIA 310 bkw/ rpm

C7 ACERT Industrial Engine Tier 3/Stage IIIA 224 bkw/ rpm

Power Rating Minimum Power 761 bkw 1020 bhp Maximum Power 1119 bkw 1500 bhp mm (68 in) 190 mm (7.5 in)

C9 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm

3516B Offshore Generator Set

C7 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm

Engine Specifications 3512C HD ATAAC, V-12, 4-Stroke Water-Cooled Diesel Compression Ratio 14.7:1 Aspiration

3512C MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2550 bhp) 1902 bkw

3516 Industrial Engine

3512 Industrial Engine

C15 ACERT Industrial Power Unit Tier 3/Stage IIIA 354 bkw/ rpm

C7 ACERT Industrial Power Unit Tier 3/Stage IIIA 168 bkw/ rpm

Industrial Power Systems Fueled By Innovation

3508 Industrial Engine

3512C MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (1810 bhp) 1350 bkw

Minimum Power 447 bkw 600 bhp Maximum Power 597 bkw 800 bhp Rated Speed

C9 ACERT Industrial Power Unit Tier 3/Stage IIIA 261 bkw/ rpm

C280-8 MARINE PROPULSION

Cat C1C2 ENCLOSURES SOUND ATTENUATED ENCLOSURES LEVEL 1, LEVEL 2 & LEVEL (B Series) Range FEATURES

220 to Volts. Generator Set Configurations U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards)

Specifications. C13 Generator Set Electric Power

CAT CG170 K. Series Gas Generator Sets

C18 ACERT Industrial Power Unit Tier bkw/ rpm

Generator Set Specifications 60 ekw (75 kva)

Voltage 220 to or 1800 RPM

built for the next generation Cat

Bore mm 4.35 in Displacement 8.8 L 535 in³ Stroke mm 4.5 in Compression Ratio 10.1:1

3412C Generator Set Electric Power. Specifications. Benefits and Features

220 to volts. Electronic unit injection

Press Release. For Worldwide Release: July 2, 2012 Release Number: EEPR1212. Caterpillar Introduces New Line of Gas Generator Sets

NATURAL GAS STANDBY. Gas Generator Set. 500 ekw 750 kva 60 HZ 1800 RPM FEATURES

Continuous, Prime, Standby, Mission Critical

Specifications. 3406C Generator Set Electric Power

THE POWER YOU LIVE BY. Caterpillar Marine Generator Sets

220 to volts. Engine Specifications 3516C, ATAAC, V-16,4-Stroke Water-Cooled Diesel 170 mm (6.69 in) Compression Ratio 14.

3512 Industrial Engine

EPA TIER 4 AND THE ELECTRIC POWER INDUSTRY. Tim Cresswell Tier 4 Product Definition Manager Electric Power Division

Voltage 208 to 600. Engine Specifications C27 ATAAC, V-12, 4-Stroke, Water-Cooled Diesel Compression Ratio 16.5:1 Aspiration

Engine Specifications C32 ACERT TA, V-12, 4-stroke Water-cooled Diesel. Compression Ratio 15.0:1 Turbocharged Aftercooled.

C18 ACERT Fire Pump Tier bkw/ rpm

C18 ACERT Fire Pump Tier bkw/ rpm

C18 ACERT Fire Pump Tier bkw/ rpm

3508 B Industrial Engine

3508 Industrial Engine

C18 ACERT Fire Pump Tier bkw/ rpm

Generator Set Specifications Rating (ekw) Rating (kva) Engine Specifications C32 ACERT TA, V-12, 4-stroke Water-cooled Diesel

3516 B Industrial Engine

1500 or 1800 RPM. Engine Specifications C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel 145 mm (5.71 in) 183 mm (7.2 in) Compression Ratio 14.

MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 320 mhp (315 bhp) 235 bkw

Power Rating Minimum Power 36.4 bkw 48.8 bhp Maximum Power 50 bkw 67.1 bhp. Emission Standards U.S. EPA Tier 4 Final, EU Stage IIIB

FREQUENTLY ASKED QUESTIONS TIER 4 INTERIM / STAGE IIIB PRODUCTS

built for the next generation

Minimum Power 224 bkw 300 bhp Maximum Power 298 bkw 400 bhp

C9 ACERT MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 575 mhp (567 bhp)

DIESEL GENERATOR SET DE110E2. Output Ratings. Technical Data. EU stage II emissions compliant. Image shown may not reflect actual package.

220 to Volts or 1800 RPM

C32 ACERT Industrial Engine Tier bkw/ rpm

C32 ACERT Industrial Engine Tier bkw/ rpm

220 to Volts or 1800 RPM

Generator Set Specifications 100 ekw (125 kva)

3056 MARINE PROPULSION

C32 ACERT Industrial Engine Tier bkw/ rpm

3512C HD MARINE PROPULSION

Oil & Gas Power Solutions

3516B Generator Set Electric Power

Power Rating Minimum Power 224 bkw 300 bhp Maximum Power 298 bkw 400 bhp. Emission Standards U.S. EPA Tier 4 Final, EU Stage IV

Minimum Power 287 bkw 385 bhp Maximum Power 388 bkw 520 bhp

Transcription:

TAKING SAFETY FURTHER DIESEL ENGINES AND EQUIPMENT FOR HAZARDOUS AREAS CAT EXPLOSION PROTECTION

SAFEGUARD BUSINESS AS USUAL INTRODUCING CAT EXPLOSION PROTECTION In 2011 Caterpillar Inc. acquired the Pyroban Group, a proven provider of safety solutions to potentially explosive hazardous areas in the oil and gas industry. With more than 40 years experience Pyroban have represented leading explosion protection for a long time. Now Caterpillar takes this position further, making this an integrated part of our complete offer. When the job takes you into a hazardous location, Caterpillar Explosion Protection has the right products. Our HazPak engine packages, Up-Fit Kits and range of Ex components fulfill industry standards, enhancing the safety of your operations.

THE SCIENCE OF EXPLOSIONS

There is always a risk of a flammable hydrocarbon release in the oil and gas industry. When the release comes into contact with air and an ignition source, an explosion can happen. Cat Ex solutions are designed to reduce the risk of an engine being the source of ignition. Potential ignition sources on unprotected diesel engines include electrical, mechanical or static sparks, overspeed or flame transmission from inlet or exhaust, and hot surfaces. Flammable gases in the atmosphere can be drawn in through the air intake along with air for combustion. This can result in flashbacks through the inlet and backfires in the exhaust. If the engine consumes flammable gas mixed with air and diesel fuel, engine overspeed can occur, which can lead to the engine running out of control. This can result in catastrophic failure of the engine, creating unprotected ignition sources. Another risk is engine misfiring, leading to unburnt fuel mixture entering the exhaust system. This can be detonated from the heat of the exhaust and ignite the surrounding atmosphere. Various surfaces on a diesel engine can exceed safe limits and become sources of ignition. These surfaces need to be protected to avoid the danger of explosion.

MAKING A DIFFERENCE THROUGH ENGINEERING EXCELLENCE With more than 40 years of experience delivering complex hazardous area engineering solutions, Caterpillar Explosion Protection delivers high quality safety products, tested and documented to latest industry standards worldwide.

CERTIFICATION AND TESTING All Cat HazPak engines are certified, where applicable, to ATEX 2014/34/EU (94/9/EC) and NEC 505 / NEC 500. In addition, they are manufactured in accordance to ISO9001:2008 quality standard certification, driving a Zero- Defect Culture With in-house test facility procedures and approval to national standards, Caterpillar ensures quality at every step in the process Cat HazPak engines are designed, manufactured and tested by Caterpillar in Caterpillar factories for single-source package confidence. LEGAL COMPLIANCE Regional legislation governs health and safety issues related to explosion protection of electrical equipment worldwide. However, since mechanical equipment is not always regulated, there is a significant potential risk to people, the environment, and your investment. Be aware of the risks and choose additional discretionary safety.

HAZPAK UNIQUE ENGINE DESIGNS Combining Pyroban technologies with Caterpillar manufacturing processes at the Shorehamby-Sea factory in the UK, Caterpillar now has an ideal purpose-built explosion protected range. All Cat explosion protected products include specific features designed to prevent ignition sources causing an explosion in the event of a hydrocarbon release. Cat Ex ASO Valve Air shut-off and inlet flame arrestor Water-cooled Turbocharger and Exhaust Manifold Ensures surface temperature is below 200oC (T3) Exhaust Gas Heat Exchanger Cools the engine exhaust below 200oC (T3) Spark Arrestor Ensures that no exhaust-born hot particles escape into the atmosphere Radiator A choice of industrial or marine solder dipped radiators providing additional cooling capacity and corrosion resistance is available Explosion protection also includes Cat Ex Battery, charge air system, Cat Ex SCS (Safety Control System), as well as certified ECM and engine electrical system.

PURPOSE-BUILT EX POWER SYSTEMS Combining Pyroban technologies with Caterpillar manufacturing processes at the Shoreham-by-Sea factory in the UK, Caterpillar now has an ideal purpose-built explosion protected range. CAT EXPLOSION PROTECTION FEATURES CAT HAZPAK Explosion protected, radiator to flywheel, diesel engine package CAT EX UPFIT KIT Kit of explosion protection safety components for a diesel or gas engine CAT EX SCS Explosion protection safety control system CAT EX ALTERNATOR (Battery Charging) Explosion protection 12V & 24V alternator CAT EX ALTERNATOR (Power) Explosion protection 60kVA & 80 kva power generation alternators CAT EX SIT Twin wall insulated exhaust system CAT EX ASO VALVE Explosion protection air shut off valve CAT EX BATTERY Explosion protection 12V and 24V battery packs

CAT HAZPAK ENGINES C4.4 TA* HAZPAK CCNR Stage 2, EPA T2 M 96bkW / 128bhp 1500rpm 112bkW / 150bhp 1800rpm Emissions non-current 92 bkw / 123bhp 2200rpm C4.4 NA* HAZPAK CCNR Stage 2, EPA T2 M 45bkW / 60bhp 1500rpm 44bkW / 59bhp 1800rpm Non-current EU II 52 bkw / 70bhp 2200rpm C7 HAZPAK IMO II, EPA T2 M, EPA T3 NR 158 bkw / 211bhp 2200rpm C9 HAZPAK EPA and CARB T3 NR, EU IIIA NR, EPA T2 M, IMO II 227 bkw / 304 bhp 2200rpm 3406C HAZPAK Emissions non-current 336 bkw / 451 bhp 2100rpm C15 HAZPAK IMO II, EPA T3 M, EU IIIA NR 376 bkw /504 bhp 1800-2100rpm * C4.4 NA and C4.4 TA are supplied with a fitted spark arrestor. All other engines are visual representations of the engine packages with a standard spark arrestor to be fitted on delivery. For more information, please contact your Cat dealer representative. Power rating shown are Net inclusive of fan losses

CAT EX UPFIT KITS Kits are provided with full documentation and technical support for installation by competent mechanical technicians. Full training can be provided. Hazardous area electrical solutions should only be installed by competent, qualified technicians (CompEx or equivalent). Standardized Zone 2 explosion protection kits are available for: Cat C2.2, C7, C9, C15, C18, C32, 3406C and 3500C engines. Kits typically include explosion proof inlet system and exhaust gas cooler with certified spark arrestor.

CAT EX COMPONENTS CAT EX ALTERNATORS (BATTERY CHARGING) The battery charging flameproof alternator (FPA) range is designed for operation in classified hazardous area conditions CAT EX ALTERNATOR (POWER) The AC alternator is a brushless, fully enclosed, fancooled, non sparking, twin bearing AC alternator with an output of 60kVA or 80kVA. CAT EX BATTERY Non sparking offshore battery with flameproof isolator and terminal box are designed for use in hazardous areas and are corrosion resistant with a 316 stainless casing. The 12V and 24V units contain deep cycle batteries protected with a 50A MCB isolator. CAT EX ASO VALVE The ASO Valve is a series of inlet shut-off valves - a key safety component for diesel engines. The valves can include integral flame arrestor elements. Its primary use is to stop engine overspeed, but can also be used in the event of exhaust and coolant over-temperature or low oil pressure CAT EX SIT A revolutionary double skin exhaust duct which allows the safe ducting of hot exhaust gases from an engine without the need for exhaust gas cooling. Can be deployed as part of an Added Safety risk management system. Cat Ex SIT can be deployed in ATEX classified Zone 2 areas but additional protection is required for the engine air inlet - contact your dealer for information on Zone 2 deployment.

ENGINEERS QUICKLY MOBILISED OFFSHORE

Designed specifically for the rugged conditions common in offshore and onshore hazardous area applications, the Cat Explosion Protection equipment range is sold and supported through Cat dealers across the world. Cat Explosion Protection will ensure that your day to day activities are protected from the risk of becoming an ignition source when working in areas where a potentially explosive atmosphere may form. WORLDWIDE SUPPORT Cat Explosion Protection solutions are supported by the Cat worldwide dealer network. More than 100,000 trained technicians and global parts distribution ensure that the parts and support you need are never out of reach. Engineers can be quickly mobilised offshore with all the necessary medical certificates and survival training, anywhere in the world 24/7/365.

PROTECTING YOU AND YOUR INVESTMENT Built around Pyroban s 40 year legacy, Cat Explosion Protection provides innovative solutions to a challenging and ever-evolving industry. Cat Ex Haz Paks, Up-Fit Kits and Components are built to provide the protection you need when operating in potentially explosive atmospheres. Backed by the Cat dealer network at hand where and when you need them you can rely on Caterpillar products to support your enduring success. BUILT FOR IT TM 2016 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, Caterpillar Yellow, the Power Edge trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. LEDW0037-00.