Power Rating Minimum Power 1506 bkw 2100 bhp Maximum Power 1506 bkw 2100 bhp

Transcription

1 The Cat is offered at 1506 bkw ( rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. It offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps. Specifications Power Rating Minimum Power 1506 bkw 2100 bhp Maximum Power 1506 bkw 2100 bhp Rated Speed 1750 rpm Emission Standards Emissions U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified) General Engine Configuration V-16, 4-Stroke-Cycle Diesel Bore 170 mm (6.7 in) Stroke 215 mm (8.5 in) Displacement 78 L (4760 in³) Aspiration Turbocharged Aftercooled Compression Ratio 14.7:1 Rotation (from flywheel end) Counterclockwise Lube System (refill) 807 L (852 qt) Engine Dimensions (Approximate. Final dimensions dependent on selected options) Length Width Height Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 3278 mm (129.1 in) 1530 mm (60.2 in) 2062 mm (81.2 in) 7840 kg (17284 lb) Benefits and Features SS SS Page 1 of 5 Page: M-1 of M-3

2 Emissions U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified). Available using EPA (U.S.) Flex provisions and for other global regulated and unregulated areas. Reliable, Quiet and Durable Power Fuel Efficiency Quality World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life. Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs. Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction. World-class Product Support Offered Through Global Cat Dealer Network Scheduled maintenance, including SOSSM sample Customer Support Agreements (CSA) Caterpillar Extended Service Coverage (ESC) Superior dealer service network Extended dealer service network through the Cat Service Distributor (ISD) program Standard Equipment Air Inlet System Air to Air Aftercooled (ATAAC) Four turbochargers, center mounted Control System ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required) Cooling System Thermostats and housing Gear driven centrifugal jacket water pump Connections for radiator cooling Exhaust System Exhaust manifold, dry Four turbochargers with watercooled bearings Two exhaust outlets, 203 mm (8 in) round flange Flywheels and Flywheel Housing SAE No. 00 flywheel (183 teeth) SAE No. 00 flywheel housing Fuel System Fuel filter, LH spin-on type Fuel transfer pump Electronically controlled unit injectors Instrumentation SS SS Page 2 of 5 Page: M-2 of M-3

3 No standard instrument or gauge panel Lube System Crankcase breather, top mounted Oil cooler Oil filler and dipstick, LH Oil pump Oil filter, LH, spin-on type Front sump oil pan, 500-hour change interval Mounting System Trunnion front support Power Take Off Front housing, two-sided Protection System ADEM A4 ECM monitoring system to provide customer programmable engine Deration strategies to protect against adverse operating conditions Emergency stop logic inputs provided at 40 pin customer interface connection Starting System Dual 24V electric starting motor, LH, unwired General Paint: Caterpillar yellow Vibration damper Lifting eyes The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, ADEM, EUI, S O S, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. SS SS Page 3 of 5 Page: M-3 of M-3

4 INDUSTRIAL - Technical Spec Sheet GENERAL INDUSTRIAL Rating Type: IND-A (CONTINUOUS) RATING Emissions: U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified) DITA Image shown may not reflect actual configuration Metric English General Engine Power Rating 1566 kw 2100 hp Number of Cylinders 16 Bore 170 mm 6.7 in Stroke 215 mm 8.5 in Displacement 78.0 L cu in. Compression Ratio 14.7 : 1 RATING DEFINITIONS AND CONDITIONS IND-A (CONTINUOUS) RATING:Continuous heavy duty service where the engine is operated at maximum power and speed up to 100% of the time without interruption or load cycling. Diesel Engines up to 7.1 liter All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kpa (29.5 in Hg), with a vapor pressure of 1 kpa (.295 in Hg), and 25 C (77 F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of C (59 F) and fuel inlet temperature 40 C (104 F). Diesel Engines greater than 7.1 liter All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kpa (29.31 in Hg) dry barometer and 25 C (77 F) temperature. Performance measured using a standard fuel with fuel gravity of 35 API having a lower heating value of 42,780 kj/kg (18,390 btu/lb) when used at 29 C (84.2 F) with a density of g/l. SS SS Page 4 of 5 TSS-EM VS-IND pdf 2016 Caterpillar All Rights Reserved Page 1 of 2

5 INDUSTRIAL - Technical Spec Sheet GENERAL INDUSTRIAL Rating Type: IND-A (CONTINUOUS) RATING Emissions: U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified) Engine Speed rpm Engine Power bkw Engine Power bhp Torque N*m Torque lb-ft The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, ADEM, EUI, S O S, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. SS SS Page 5 of 5 TSS-EM VS-IND pdf 2016 Caterpillar All Rights Reserved Page 2 of 2