ARTICULATED BOOM LIFT MODEL TA0E PARTS MANUAL TEREX AERIALS 0600 W. Brown Deer Road Milwaukee, WI 3 U.S.A. Telephone:() 36-9300 Facsimile:() 3-03 TEREX AERIALS Courtstown Industrial Park Little Island, Co. Cork, Ireland. Telephone: (33) -330 Facsimile: (33) -3336 TEREX AERIALS 06 th Street S. E. Waverly, IA 0677 U.S.A. Telephone:(39) 3-390 Facsimile:(39) 3-77 P/No: 600-000 WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED
NOTICE TO USERS - DISCLAIMER Terex Aerials strives to include in the Parts Manual, information and illustrations that are accurate, complete, and current. Due to on-going changes and revisions by our many suppliers, it is often impossible to show all variations of a given assembly. Therefore, this information is subject to change without notice. NOTICE The Parts Manual, though sometimes helpful in the process of assembly/disassembly, is NOT intended to be assembly/disassembly instructions.
- CONTENTS LIST OF CONTENTS SECTION - NOTICE TO USERS - TABLE OF CONTENTS - HOW TO USE THE PARTS MANUAL -6 HOW TO ORDER PARTS SECTION - PIVOT PINS - LABEL POSITIONS SECTION 3 3- UPPER CHASSIS 3- LOWER CHASSIS 3-3 DRIVE ASSEMBLY 3- STEERING ASSEMBLY 3- REAR AXLE ASSEMBLY
CONTENTS -3 SECTION - PLINTH ASSEMBLY -3 HYDRAULIC MODULE - HYDRAULIC TANK -6 HYDRAULIC VALVE BLOCK - HYDRAULIC FITTINGS -0 LOWER CONTROL BOX - ELECTRIC MODULE SECTION - FIRST LIFT STAGE - LIFT CYLINDER -3 SECOND LIFT STAGE - ZOOM BOOM ASSEMBLY -6 THIRD LIFT CYLINDER -7 MASTER CYLINDER - TELESCOPIC CYLINDER -9 SLAVE CYLINDER -0 STEER CYLINDER - CAGE/CRADLE ASSEMBLY - UPPER CONTROL BOX -3 CAGE ROTATION CYLINDER - JOYSTICK CONTROLLER
- HOW TO USE THE PARTS MANUAL
HOW TO USE THE PARTS MANUAL - PARTS MANUAL FORMAT. SECTION refers to the major divisions of the Parts Manual.. PAGE indicates the page number of the illustration or parts list. 3. The ITEM number shown in the first column of the parts list, corresponds to the callout in the illustration on the same page or facing page.. The Terex Aerials PART NUMBER is shown in the second column for items that are serviceable.. DESCRIPTION of the part or assembly is shown in the third column. 6. QUANTITY indicates the quantity of items used in the assembly or sub-assembly directly above. 7. REMARKS are shown in the fifth or far right column. The remark column will include page number references for more detailed breakdowns, keyed items included in Kits indicated by symbols *, sizes & special information.
-6 HOW TO ORDER PARTS
HOW TO ORDER PARTS -7 HOW TO ORDER PARTS. Find the Terex Aerials Part Number. A. Using the Table of Contents, find the Section and Number. B. Match the required part to the illustration and note the callout number. C. Find the corresponding Reference number in the parts list below the illustration or on the facing page. D. Use the Terex Aerials Part Number listed next to the Ref. number when ordering. E. Always include the complete part number, as shown in the Parts Manual, along with the description of the part and specify the quantity of the part you wish to order. F. Anticipate your spare parts requirements. G. Place orders early in the day. H. Keep a supply of normal maintenance and recommended spare parts in stock. I. Obtain recommended parts stocking requirements from Terex Aerials or your Terex Aerials Distributor.. Customer Ordering: Genuine Terex Aerials parts are available worldwide and must be ordered through your local Terex Aerials Distributor. For your nearest Terex Aerials Distributor, contact the Parts Sales Centre at the numbers listed below. 3. Distributor Ordering: Listed below in the respective order of preference, are the methods of ordering parts. A. EMAIL ns@terex@ie B. FAX: +33--3336 C. PHONE: +33--330 D. MAIL: Terex Aerials, Courtstown Industrial Park, Little Island, Co Cork, Ireland. NOTE: If your Parts Department is not ON-LINE, contact the PARTS SALES CENTRE for information on using this system. Any errors, comments, or suggestions should be forwarded to the Engineering Manager at the following address: Terex Aerials, Courtstown Industrial Park, Little Island, Co.Cork, Ireland.
MAIN ASSEMBLY - PIVOT PINS ITEM PART NO. DESCRIPTION QTY. REMARKS GS3 PIN 0 x 70 GS0 PIN 30 x 06 3 GS73 PIN x 0-066 PIN x90 3 GS7 PIN x 6 GS7 PIN 0 x 7 7 GS76 PIN 0 x 9 LS PIN 0x9 9 GS00 PIN 0 x 3 0 0-06 PIN x 0-0666 CAGE PIVOT PIN See page -
- MAIN ASSEMBLY LABEL POSITIONS
MAIN ASSEMBLY -3 ITEM PART NO. DESCRIPTION QTY. REMARKS 70-07 UPPER CONTROL LEGEND PLATE 70-079 LOWER CONTROL PLATE LEGEND 0-0006 WARNING STRIP 3 07-00 STRIPE RED DECAL F0093 TA0E GENERIC DECAL KIT 000 TA0E DECAL 37003-003 SERIAL NUMBER PLATE 9 70-0 KEEP HANDS FREE DECAL 0 A HOOK MOTIF DECAL 70-03 DIRECTIONAL ARROWS DECAL 70-06 CE MARK Not USA machines 9 00 CROWN RED 3. DECAL 0 003 CROWN RED LG 6 0700 CHEVRON R.H. DECAL 07300 CHEVRON L.H. DECAL F009 DECAL KIT FOR USA ONLY 6 MK3 WARNING WORK LOAD MK DANGER HIGH VOLTAGE 3 00-3 CAUTION NO STEP 07600 SAFETY BELT ONLY 6 MK3 WARNING MANUALS 7 MK7307 WARNING ATTACH BELT 7 7003-00 EMERGENCY LOWERING / TOWING Extra decal for USA Machines DECAL KIT FOR SWEDEN ONLY 6 700-0090 S.W.L. DECAL 7 700-00 EMERGENCY LOWERING / TOWING 700-00 0 POINT DECAL DECAL KIT FOR SPAIN ONLY 6 7099-007 S.W.L. DECAL 7 7099-0030 EMERGENCY LOWERING / TOWING 7099-0006 0 POINT DECAL
- MAIN ASSEMBLY ITEM PART NO. DESCRIPTION QTY. REMARKS F00996 DECAL KIT GERMANY/AUSTRIA ONLY 6 70-009 S.W.L. DECAL 7 70-0 EMERGENCY LOWERING / TOWING 70-0070 0 POINT DECAL F0099 DECAL KIT IRELAND / UK ONLY 6 7003-000 S.W.L. DECAL 7 7003-00 EMERGENCY LOWERING / TOWING 7003-00 0 POINT DECAL F0099 DECAL KIT FRANCE ONLY 6 700-009 S.W.L. DECAL 7 700-0096 EMERGENCY LOWERING / TOWING 700-006 0 POINT DECAL DECAL KIT HOLLAND ONLY 6 A S.W.L. DECAL 7 7006-003 EMERGENCY LOWERING / TOWING 7006-006 0 POINT DECAL F00997 DECAL KIT ITALY ONLY 6 7009-0 S.W.L. DECAL 7 7009-039 EMERGENCY LOWERING / TOWING 7009-00 0 POINT DECAL DECAL KIT DENMARK ONLY 6 70-00 S.W.L. DECAL 7 70-06 EMERGENCY LOWERING / TOWING 70-0 0 POINT DECAL DECAL KIT FINLAND ONLY 6 70-0 S.W.L. DECAL 7 70-06 EMERGENCY LOWERING / TOWING 70-09 0 POINT DECAL
BASE ASSEMBLY 3 3- UPPER CHASSIS ITEM PART NO. DESCRIPTION QTY. REMARKS GS BATTERY COVER 3300-0090 BATTERY BRACKET 3300-009 BATTERY BRACKET 3 300-003 CHASSIS ASSEMBLY EU Machines 300-003 CHASSIS ASSEMBLY US Machines
3 3- BASE ASSEMBLY LOWER CHASSIS ITEM PART NO. DESCRIPTION QTY. REMARKS 09-0076 M X.p HEX NUT - REAR ASSEMBLY 0-0397 WHEEL ASSEMBLY (REAR) COMPLETE WITH TYRE, RIM AND NAVE 3 0-0399 6 STUD AXLE DS906 AXLE MOUNTING ASSEMBLY COMPLETE MS79 AXLE MOUNTING PLATE 003-00 M0 X 00LG HEX HEAD BOLT 03-00 M0 HEAVY-DUTY FLAT WASHER 00-0006 M0 NYLOC NUT GS0 PIN 7 GS3 PIN (STEERING BLOCK) 300-0003 STEERING ARM (LEFT HAND) 300-000 STEERING ARM (RIGHT HAND) 9 3 WHEEL ASSEMBLY (FRONT) COMPLETE WITH TYRE, RIM AND NAVE 0 0 PM 0 X 0 DX GLACIER BEARING 63 WC 0 DX GLACIER THRUST WASHER GS97 STEER PIVOT BLOCK & STUB AXLE ASSEMBLY
BASE ASSEMBLY 3 3-3 DRIVE ASSEMBLY ITEM PART NO. DESCRIPTION QTY. REMARKS 00-00 SEPERATELY EXCITED MOTOR 00-0 M0 x 0 x.9 SOCKET HEAD CAP BOLT 03-003 SPRING WASHER 3 007-00 M NYLOC NUT 03-0007 M PLAIN WASHER 6 00-00 M x 0 x 0.9 SOCKET HEAD CAP BOLT 6 06 GEARBOX 7 M706 SPLINE 07 OIL SEAL OD, 60 ID, 0 WIDE 9 MS3 ADAPTOR PLATE 0 006-000 M x 30 SCREW CAP 0.9 6
3 3- BASE ASSEMBLY STEERING ASSEMBLY ITEM PART NO. DESCRIPTION QTY. REMARKS 09-0076 M WHEELNUT 3 03-000 0 x 0 BUSHINGS Part of Steer Cyclinder 300-0003 STEERING ARM (LEFT HAND) 00-0036 M x 0 LG HEX HEAD SCREW 6 03-00 M SPRING WASHER 7 GS3 STEERING BLOCK PIVOT PIN 00-007 STEERING CYLINDER 9 300-000 STEERING ARM (RIGHT HAND) 0 MS TRACK ROD 003-000 M0 x 0 LG x.p HEX HEAD BOLT 63 M0 SPRING WASHER 3 637 M0 x.p HALF NUT 370 SPHERICAL (ROSE) JOINT (MMC 0)
BASE ASSEMBLY 3 3- REAR AXLE ASSEMBLY
3 3-6 BASE ASSEMBLY REAR AXLE ASSEMBLY ITEM PART NO. DESCRIPTION QTY. REMARKS 793 BELL SPRINGS, FAIL SAFE SPRINGS BRAKE 36 76 SEAL SPRING FOR BRAKE 76 SNAP RING FOR SEAL SPRING 79 BACK SPRING BRAKE PISTON 760 BALL 766 CLAMP FOR BRAKE RUBBER PIECE 767 BRAKE COVER 77 SNAP RING FOR BELL SPRINGS 3 763 ACTUATOR 76 BRAKE DISK 0 76 COUNTER BRAKE 6 6 799 OIL SEAL PINION 7 790 CAP SCREW, PLANETARY BOX 0 79 OIL SEAL HUB 9 796 BEARING WHEEL HUB 0 797 WHEEL HUB COMPLETE
TURRET ASSEMBLY - PLINTH ASSEMBLY
- TURRET ASSEMBLY PLINTH ASSEMBLY ITEM PART NO. DESCRIPTION QTY. REMARKS 3 SLEW GEAR BOX 03-0 M X 30 X.9 GRADE SOCKET HEAD BOLT 00-000 M NYLOC NUT 03-006 SEAL KIT 0 ROTATION MOTOR 03-00 SEAL KIT Not Illustrated 3 003-009 MX70LG 0.9 GRADE CAP HEAD BOLT 7 Slew Ring/Chassis/Plinth 300-0037 FIRST POST 00-03 LIMIT SWITCH BODY 030 LIMIT SWITCH HEAD DS009 LIMIT SWITCH LEVER 6 09-000 BALLAST (LEFT HAND) 09-0003 BALLAST (RIGHT HAND) 0 M X 60 HEX HEAD SCREW 6 6 M HEX HEAD LOCK NUT 6 7 30-009 PLINTH ASSEMBLY 7 SLEW RING 9 00-0097 M X 60 X 0.9 GRADE HEX HEAD BOLT 0 006-0003 M X 70 HEX HEAD BOLTS.9 GS9 BALLAST RETAINING ASSEMBLY 093 M X 60 LG. HEX HEAD SCREW 6 3 3030-0066 SLEW GUARD 67 DIVERTER VALVE 30 LEVER 300-00 BEACON MOUNT ASSEMBLY Not Illustrated
TURRET ASSEMBLY -3 HYDRAULIC MODULE ITEM PART NO. DESCRIPTION QTY. REMARKS 3 6 3030-007 3030-006 7 303-000 MS0 0-0030 MODULE BASE COVER CATCH HYD. TANK COMPLETE WITH FILTER AND HANDPUMP MOTOR/PUMP CLAMP HYDRAULIC VALVE BLOCK COMPLETE See - See -6 7 07-00 GEAR PUMP 0-09 V/3.7 KW MOTOR 0-060 BRUSH SET Kit 0-0 SEAL KIT
- TURRET ASSEMBLY HYDRAULIC TANK - P/No: 30-000
TURRET ASSEMBLY - HYDRAULIC TANK - P/No: 30-000 ITEM PART NO. DESCRIPTION QTY. REMARKS 3 6 7 9 0 3 6 07-0030 9006-3 030-0039 030-000 07-007 39 03-000 03-00 303-039 00-00 00-007 03-00 00-03 03-00 03-0006 303-039 TANK FABRICATION TANK TOP COVER RETURN FILTER / FILLER SUCTION FILTER HAND PUMP BUBBLE LEVEL GUAGE GASKET 3/ QUICK RELEASE COUPLING ½ FEMALE BLANK M x S.CAP SCREW M x 0 S.CAP SCREW M SPRING WASHER M6 x 0 S.CAP SCREW M6 SPRING WASHER M6 STEEL WASHER 90 M/M O-LOC/BSP ADAPTOR -6C0MLO-S 6 7 030-00 FILTER ELEMENT 03-000 AIR FILTER ELEMENT 9 03-0 HAND PUMP SEAL KIT
-6 TURRET ASSEMBLY HYDRAULIC VALVE BLOCK - P/N 0-0030
TURRET ASSEMBLY -7 HYDRAULIC VALVE BLOCK ITEM PART No. DESCRIPTION QTY. REMARKS 003-00 CETOP 3 VALVE 006-00 R.V. DIFF. AREA 3 3 009-0036 CETOP 3, DOUBLE P.O. CHECK VALVE 0-0 COIL TO FIT CETOP 3 VALVE Vdc 6 00-039 CETOP 3/ MANUAL OVERRIDE ASSEMBLY 7 7 09-003 MANIFOLD ALUM 6 009-003 CHECK VALVE 3 00-03 NEEDLE F.C. FINE 9 006-0033 RED./REL. PIL.OP. 0 003-007 WAY NC POP. C/W MANUAL OVERRIDE 003-0079 WAY NC POP. 003-000 WAY NO POP. 3 0-09 COIL Vdc 3 0-00 PRESSURE SWITCH 303-0 PRESSURE TEST POINT
- TURRET ASSEMBLY HYDRAULIC FITTINGS
TURRET ASSEMBLY -9 ITEM PART No. DESCRIPTION QTY. REMARKS 00-07 PUMP SUCTION HOSE 00-073 MANIFOD TO HAND PUMP HOSE 3 00-07 PUMP DEL TO MANIFOLD HOSE 00-07 MANIFOLD TANK RETURN HOSE 00-076 STEER LEFT CYL ROD END HOSE 6 00-077 STEER RIGHT CYL FULL BORE HOSE 7 00-07 MANIFOLD TO DIFF LOCK HOSE 00-079 LBV TO SLEW BOTTOM PORT HOSE 9 00-070 LBV TO SLEW TOP PORT HOSE 0 00-07 LBV TB TO DIVERTOR VALVE HOSE 00-07 BRAKE ADJUST TO BRAKE HOSE 00-073 BRAKE CONNECTOR L TO R HOSE 3 00-07 SLEW MOTOR TOP PORT TO DIVERTOR VALVE HOSE 00-07 SLEW MOTOR BOTTOM PORT TO DIVERTOR VALVE HOSE 00-076 LVB TO CAGE ROTATE HOSE 6 00-077 LVB TO CAGE ROTATE HOSE 7 00-07 LVB TO MASTER LEVEL HOSE 00-079 LVB TO MASTER LEVEL HOSE 9 00-0730 DRAIN LINE HOSE 0 00-073 ZOOM TO LVB ANNULAR HOSE 00-073 ZOOM TO LVB F.B. HOSE 00-0733 LIFT 3 TO LVB HOSE 3 00-073 LIFT 3 TO LVB HOSE 00-073 LIFT TO LVB HOSE 00-0736 LIFT TO LVB HOSE 6 00-0737 LIFT TO LVB HOSE 7 00-073 LIFT TO LVB HOSE 00-0739 MASTER TO SLAVE HOSE 9 00-070 MASTER TO SLAVE HOSE F 303-090 SIZE O-LOK Mx¼BSPM F 303-093 SIZE O-LOK TEE M FM-SWIVEL RUN 6 F3 303-09 SIZE O-LOK M x 3/ BSP M 3 F 303-03 SIZE O-LOK Mx½BSPM F 303-00 SIZE O-LOK MxMx.M F6 303-0 SIZE 6 O-LOK x¼bspm F7 303-00 SIZE O-LOK Mx½BSPM F 303-00 SIZE 6 O-LOK Mx½BSPM F9 303-03 SIZE O-LOK x BSP M 3 F0 303-00 SIZE O-LOK Mx¾BSPM F 303-009 SIZE O-LOK M X MY0 X. M F 303-03 SIZE O-LOK M x 3/ BSP M x.0 nmm ORIFACE F3 303-03 SIZE O-LOK M x 3/ BSP M x. MM ORIFACE F 303-0 SIZE O-LOK Mx¼BSPM90 ELB
-0 TURRET ASSEMBLY LOWER CONTROL BOX ITEM PART NO DESCRIPTION QTY. REMARKS 0 3 6 7 9 00-03 00-07 00-0 00-0 00-0336 00-0337 003-00 003-0 0-036 003-0 0-009 63 63 EMERGENCY STOP BUTTON CONTACT (NORMALLY CLOSED) SELECTOR SWITCH. CONTACT (NORMALLY OPEN) KEY SWITCH CONTACT BLOCK KEY SWITCH COVER ENCLOSURE PCB CABLE GLAND FUSE AMP FUSE AMP FUSE AMP 0 70-079 DECAL 0 03-036 RELAY BASE 0-00 V RELAY 0-000 V RELAY 3 0-0096 LOWER CONTROL HARNESS Up to S/N: 63 - Internal To Box 0-03 LOWER CONTROL HARNESS From Serial No: 6 030-000 BOOM HARNESS To Upper Box - Not Illustrated 0-009 CHASSIS HARNESS Not Illustrated 3 0-06 LATCHING PCB Up to Serial No: 63 0-07 LATCHING PCB From Serial No: 6 0-06 AMP DIODE (INHARNESSED) Not Illusrtrated
BOOM ASSEMBLY - FIRST LIFT STAGE ITEM PART NO. DESCRIPTION QTY. REMARKS 03-00 GLACIER PM x DX BUSH Part Of Lift Cylinder SS0 CABLE COVER MS CABLE COVER STUD 3 GS OFFSET POST GS7 ZOOM BOOM REST MS3 NYLON PAD 0 M x GRADE. HEX HEAD SCREW 6 M LOCK WASHER 7 0 PERMAGLIDE PAP 0 X 0 BUSHING GS79 FIRST TIE RAIL 9 00-0 LIFT CYLINDER 0 30-03 FIRST BOOM See -
- BOOM ASSEMBLY LIFT CYLINDER - P/No: 00-0 ITEM PART NO. DESCRIPTION QTY REMARKS 00-0 LIFT CYLINDER 03-06 SEAL KIT 3 09-00 GREASE NIPPLE 03-006 OVERCENTRE CARTRIDGE
BOOM ASSEMBLY -3 SECOND LIFT STAGE ITEM PART NO. DESCRIPTION QTY. REMARKS 0 PERMAGILDE PAP 0X0 BUSHING 30-036 SECOND BOOM 3 SS0 CABLE COVER MS CABLE COVER STUD GS60 SECOND OFFSET POST GS30 SECOND TIE RAIL 6 00-07 LIFT CYLINDER See -6 7 03-00 GLACIER PM X DX BUSH Part Of Lift Cylinder 00-0037 M X GRADE. HEX HEAD SCREW 9 M LOCK WASHER
- BOOM ASSEMBLY ZOOM BOOM ASSEMBLY
BOOM ASSEMBLY - ZOOM BOOM ASSEMBLY ITEM PART NO. DESCRIPTION QTY. REMARKS 3 6 7 9 0 3 6 7 00-0097 MS3 30-00 MS SS39 SS7 GS76 0 00-006 MS30 30-0 00-0 0-06 03-00 09-0 09-07 09-06 09-0 3300-0090 3300-009 03-000 ZOOM CYLINDER WEAR PAD (SIDE) ZOOM BOOM (OUTER) CABLE COVER STUD CABLE COVER END COVER PIN PERMAGLIDE PAP 0 x 0 BUSHING LEVEL CYLINDER (MASTER) WEAR PAD (TOP/BOTTOM) ZOOM BOOM (INNER) LIFT CYLINDER PIN GLACIER PM x DX BEARING CAT TRACK 60. PZ END 7.0.00 LINKS 7.0 CLIPS CABLE TRAY COVER CABLE TRAY GLACIER PM 0 x 0 DX BUSH 6 See - See - See -7 See - See - Part of Lift Cylinder Part of Slave Master Level Cylinder 9 00-009 LEVEL CYLINDER (SLAVE) See -9 0 7 CIRCLIP GS7 PIN See - GS0 PIN See - 3 GS00 PIN See -
-6 BOOM ASSEMBLY THIRD LIFT CYLINDER - P/No: 00-07 ITEM PART NO. DESCRIPTION QTY. REMARKS 00-07 LIFT CYLINDER 03-0 SEAL KIT 3 09-00 GREASE NIPPLE 03-006 OVERCENTRE CARTRIDGE
BOOM ASSEMBLY -7 MASTER CYLINDER - P/No: 00-006 ITEM PART NO. DESCRIPTION QTY REMARKS 00-006 MASTER CYLINDER 03-0090 SEAL KIT 3 09-00 GREASE NIPPLE
- BOOM ASSEMBLY TELESCOPIC CYLINDER - P/No: 00-0097 ITEM PART NO. DESCRIPTION QTY. REMARKS 00-0097 TELESCOPIC CYLINDER 03-0 SEAL KIT 3 09-00 GREASE NIPPLE 006-00 RELIEF VALVE 0-003 PO CHECK VALVE 7 09-0090 SHUTTLE
BOOM ASSEMBLY -9 SLAVE CYLINDER - P/No: 00-009 ITEM PART NO. DESCRIPTION QTY REMARKS 00-009 SLAVE CYLINDER 03-0090 SEAL KIT 3 09-00 GREASE NIPPLE 0-0009 DOUBLE OVERCENTRE WITH DUAL RELIEFS Complete block 03-0006 COUNTER BALANCE CARTRIDGE 6 006-0036 RELIEF VALVES
-0 PLATFORM ASSEMBLY STEER CYLINDER - P/NO: 00-007 ITEM PART NO. DESCRIPTION QTY REMARKS 00-007 STEER CYLINDER 03-0090 SEAL KIT
PLATFORM ASSEMBLY - CAGE/CRADLE ASSEMBLY ITEM PART NO DESCRIPTION QTY. REMARKS 3 6 7 9 0 306-00 307-0069 00-00 70-07 00-03 00-033 00-03 00-09 00-06 00-00 03-006 GS6 03-00 0-0666 330-007 CAGE FT CRADLE (EP CONTROLS) UPPER CONTROLS DECAL FOOTSWITCH FOOTSWITCH CONTACT CYL. PIVOT BOLT (M0 x 7mm Grade.9) CYL. PIVOT BOLT (M0 x 00mm Grade.9) CAGE ROTATION CYLINDER CAGE ROTATION CYLINDER 0 I/D X 30 BUSH STUB POST I/D X 30 BUSH MAIN PIVOT PIN DROP BAR GS0 CAGE ROTATION PIN 3 03-00 BUSHINGS Not Illustrated Up to November 99 From November 99 See -3
- PLATFORM ASSEMBLY UPPER CONTROL BOX 7 9 ITEM PART NO. DESCRIPTION QTY. REMARKS 3 6 7 9 0 3 309-0009 JOYSTICK CONTROLLER See page - 00-033 003-0 003-03 003-0 0-0076 09 00-07 00-0036 00-003 0 00-0 00-0 00-007 00-07 037 00-0 POS SELECTOR COVER ENCLOSURE CABLE GLAND BATTERY INDICATOR SELECTOR SWITCH (LIFT/DRIVE) CONTACT (NORMALLY CLOSED) OVERLOAD INDICATOR OVERLOAD BULB SELECTOR SWITCH (DIFF LOCK) CAGE ROTATE CAGE LEVELLING EMERGENCY STOP BUTTON CONTACT (NORMALLY CLOSED) HORN PUSH BUTTON, GREEN CONTACT (NORMALLY OPEN) 70-07 DECAL 0-009 UPPER CONTROL BOX HARNESS Internal to Box 030-000 BOOM HARNESS To Lower Control Box
PLATFORM ASSEMBLY -3 CAGE ROTATION CYLINDER - P/NO: 00-00 ITEM PART NO. DESCRIPTION QTY. REMARKS 00-00 CAGE ROTATION CYLINDER 03-0099 SEAL KIT 3 09-00 GREASE NIPPLE 03-0009 DOUBLE OVERCENTRE VALVE
- PLATFORM ASSEMBLY JOYSTICK CONTROLLER - P/N: 309-0009 ITEM PART NO. DESCRIPTION QTY. REMARKS 03-0397 HANDLE 03-039 BOOT 3 03-0399 ROCKER 03-000 MICROSWITCH 03-00 MICROSWITCH LEVER 6 03-003 SPRING, COMPRESSION 7 03-00 O-RING 03-00 ANTI-ROTATION PIN 9 03-006 GAITOR 0 03-007 OPERATING ROD