AVENTOS HK-XS AVENTOS HK-XS - PDF Free Download

AVENTOS HK-XS AVENTOS HK-XS High quality in a slim design High quality in a slim design blum.com blum.com

High quality in a convenient package AVENTOS HK-XS is is a smaller, cost-effective lift lift system which can be be used in applications used in applications ranging from ranging shallow from depth shallow wall depth cabinets wall cabinets above a refrigerator above a to pantries all refrigerator to with pantries varying front all with designs varying and front materials designs and materials. Contents AVENTOS HK-XS 4 Quality of motion 5 Wide range of applications 6 Ordering information for face frame and panel 8 Planning specifications for face frame and panel 10 Ordering information for narrow aluminum 12 Planning specifications for narrow aluminum 14 Ordering information for TIP-ON 16 Planning specifications for TIP-ON 18 Installation and adjustment 20 Assembly aids 21 Part number index 3

High quality of motion typical of AVENTOS AVENTOS HK-XS proves itself with the familiar AVENTOS quality of motion. Stay lifts open and close with seemingly weightless movement. They close silently and effortlessly in combination with CLIP top BLUMOTION and COMPACT BLUMOTION hinges. High quality of motion The variable stop allows the lift system to remain in any desired position and always within easy reach. Proven Blum quality The lift mechanism with a robust spring package is the core element of this design. This allows the AVENTOS HK-XS to provide a high level of stability and durability. 4

A A wide range of of applications in in every living area The The design design of the of the AVENTOS AVENTOS HK-XS HK-XS means means that that cabinets cabinets with with small small internal depths internal can depths be equipped can be easily. equipped The easily. symmetrical The symmetrical lift mechanism lift mechanism can be used on one can or both be used sides, on for one the or widest both sides, range for of the applications widest range and of design applications freedom. and design freedom. Wide cabinets If the lift mechanism is utilized on both sides, large, heavy fronts can also be used. Versatility AVENTOS HK-XS allows you the design freedom for all areas of the home, whether it's the kitchen, living room or bathroom. 5

AVENTOS HK-XS Ordering information for face frame and panel Well suited for small wall cabinets Cabinet height from 238 (9-3/8") to 610 (24") Interior depth minimum 127 (5") 3b 4a 4b 5 Closes silently and effortlessly with CLIP top BLUMOTION or COMPACT BLUMOTION hinges Simple, virtually tool-free assembly and easy adjustment Symmetrical lift mechanism can be used on one or both sides 3a Designed for use with BLUMOTION hinges 1 2b 2a Step 1 Determine the power factor for the application Power factor = cabinet height (inch) x door weight including double handle weight (lb) Determine power factor To select the correct lift mechanism for a given application, the power factor must first be calculated by using the formula below. Use the table at the bottom of the page to convert ounces into decimal form for easy calculation. Example: Cabinet height: 15 inches (within possible range) Door weight including twice the handle weight: 9 lb 14 oz (14 oz =.9 lb see chart below) Total weight converted to decimal is 9.9 lb Power factor = cabinet height multiplied by door weight including twice the handle weight Power factor = 15 x 9.9 Power factor = 148.5 A power factor of 148.5 requires lift mechanism 20K1501 381 (15") NOTE: AVENTOS planning tools available at blum.com/planning door weight + twice handle weight = 9 lb 14 oz weight conversion chart oz 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 lb.1.1.2.3.3.4.4.5.6.6.7.8.8.9.9 6 2015 Blum, Inc. Subject to technical modifications without notice

Ordering information AVENTOS HK-XS Step 2 Select the required components Lift mechanism 1 NOTE: Two lift mechanisms are required for cabinet widths greater than 610 (24") Opening angle is 105 with CLIP top BLUMOTION, 100 with COMPACT BLUMOTION hinges Power factor range (1 lift) Power factor range (2 lifts) 17 60 34 120 20K1101 61 112 121 224 20K1301 113 156 225 312 20K1501 Cabinet mounting plate 2a 2b Panel Screws EXPANDO Face frame Screws 20K5101 20K51E1 20K5501 Door mounting plate 3a 3b Screws NOTE: For use with large overlay five-piece doors Screws 20K4101 20K4501 Hinge recommendations 4a CLIP top BLUMOTION 110 Press-in Hinge mounting plate Screws 71B3580 175H3100 4b 5 COMPACT BLUMOTION 39C 32 (1-1/4") Overlay, Press-in 39C358B.20 COMPACT BLUMOTION 38N 13 (1/2") Overlay, Press-in 38N358B.08 NOTE: For other hinges and mounting plate options please refer to the Concealed hinges brochure Dimensions in millimeters (inch equivalents as noted) 2015 Blum, Inc. 7

AVENTOS HK-XS Planning specifications for face frame and panel Cabinet and door mounting plate locations for face frame applications Lift mechanism Door mounting plate Space requirements * 162*/178** 134* 32 15.5+OL 1.5 minimum 200 minimum 32 125 minimum 27 9.5 *Location when using COMPACT 39/38C **Location when using COMPACT 38N *Location when using COMPACT hinges When using large overlay mounting plate (20K4501) hole location is offset by 19 mm (15.5 + OL - 19) *Minimum top reveal based on hinge used. Please see minimum reveal specs in Concealed hinges brochure NOTE: When using CLIP top BLUMOTION hinges in a face frame application, you will need to use the calculation below: Y = 137 + D + K NOTE: When using CLIP top BLUMOTION hinges in a face frame application, you will need to use the calculation below: 126 + D + K + OL Z Door height Door thickness Attach using #6 x 5/8 (606N/P) wood screw Cabinet and door mounting plate locations for panel applications Lift mechanism Door mounting plate Y 32 126+D+K+OL 32 15.5+OL Z = (Door height minus A) x 0.3 Door thickness (mm) 16 19 22 24 A (mm) 45 34 23 15 Cornice and crown molding clearance Door thickness 37 Opening angle Y = 137 + D + K Attach using #6 x 5/8" (606N/P) wood screw Abbreviations K = Hinge arm crank D = Mounting plate height Straight arm crank = 0 mm K = Hinge arm crank Half cranked arm = 9.5 mm OL = Overlay Full cranked arm = 18 mm NOTE: Designed to be used in a lift up application only Door thickness (mm) 16 19 22 24 X (mm) 45 34 23 15 Opening angle = 105 CLIP top BLUMOTION 100 COMPACT BLUMOTION 8 2015 Blum, Inc. Subject to technical modifications without notice

Planning specifications AVENTOS HK-XS Face frame applications CLIP top BLUMOTION 110 COMPACT BLUMOTION 39C COMPACT BLUMOTION 38N B overlay 19 (3/4") 3 (1/8") overlay 19 (3/4") 3 (1/8") H overlay 66.5 *13 8 (5/16") 13 (1/2") 11 (7/16") 11 (7/16") *All 35 mm and 8 mm holes must be a minimum of 13 mm deep H Overlay P S 0 14 15 16 17 18 12 21.5 3 11 12 13 14 15 15 24.5 4.5 9.5 10.5 11.5 12.5 13.5 16.5 26 6 8 9 10 11 12 18 27.5 3 4 5 6 7 fixed distance B = boring distance = 11 T gap 5 (3/16") factory setting, adjusts +2 (3/32") -1 (1/32") Overlay 32 (1-1/4") 3 (1/8") B = boring distance gap 5 (3/16") factory setting, adjusts +2 (3/32") -1 (1/32") Overlay 13 (1/2") 3 (1/8") B = boring distance Panel applications CLIP top BLUMOTION 110 37 W H 66.5 B overlay *13 NOTE: Use 3 hinges at cabinet width 914 (36") and/or power factor 156 and 4 hinges at cabinet width 1219 (48") and/or power factor 234 CLIP top BLUMOTION 110 Minimum reveal table 3 0.5 1.0 1.8 2.7 4.3 4 0.5 1.0 1.7 2.5 3.8 5 0.5 0.9 1.7 2.4 3.4 6 0.5 0.9 1.6 2.3 3.2 7 0.5 0.9 1.6 2.2 3.0 B = boring distance 16 19 22 24 26 T = door thickness For thickness greater than 26 trial app. recommended *All 35 mm and 8 mm holes must be a minimum of 13 mm deep H Overlay P S 0 14 15 16 17 18 12 21.5 3 11 12 13 14 15 15 24.5 6 8 9 10 11 12 18 27.5 9 5 6 7 8 9 21 30.5 3 4 5 6 7 fixed distance B = boring distance = 11 T Abbreviations H = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width T = Door thickness COMPACT BLUMOTION 39C Minimum reveal table 3 (1/8") 5.5 (7/32") 19 (3/4") B = boring distance T = door thickness COMPACT BLUMOTION 38N Minimum reveal table 3 (1/8") 7 (9/32") 19 (3/4") B = boring distance T = door thickness Dimensions in millimeters (inch equivalents as noted) 2015 Blum, Inc. 9

AVENTOS HK-XS Ordering information for narrow aluminum 4a 4b Well suited for small wall cabinets Cabinet height from 238 (9-3/8") to 610 (24") Interior depth minimum 127 (5") Closes silently and effortlessly with CLIP top BLUMOTION Simple, virtually tool-free assembly and easy adjustment Symmetrical lift mechanism can be used on one or both sides Designed for use with BLUMOTION hinges 3 1 2 Step 1 Determine the power factor for the application Power factor = cabinet height (inch) x door weight including double handle weight (lb) Determine power factor To select the correct lift mechanism for a given application, the power factor must first be calculated by using the formula below. Use the table at the bottom of the page to convert ounces into decimal form for easy calculation. Example: Cabinet height: 15 inches (within possible range) Door weight including twice the handle weight: 9 lb 14 oz (14 oz =.9 lb see chart below) Total weight converted to decimal is 9.9 lb Power factor = cabinet height multiplied by door weight including twice the handle weight Power factor = 15 x 9.9 Power factor = 148.5 A power factor of 148.5 requires lift mechanism 20K1501 381 (15") NOTE: AVENTOS planning tools available at blum.com/planning door weight + twice handle weight = 9 lb 14 oz weight conversion chart oz 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 lb.1.1.2.3.3.4.4.5.6.6.7.8.8.9.9 10 2015 Blum, Inc. Subject to technical modifications without notice

AVENTOS HK-XS Planning specifications for narrow aluminum Cabinet and door mounting plate locations for panel applications Lift mechanism Door mounting plate Space requirements * Y 32 126+D+K+OL 15.5+OL 1.5 minimum 200 minimum 37 125 minimum 27 Y = 137 + D + K Attach using #6 x 11 mm (699.110) aluminum screw *Minimum top reveal based on hinge used. Please see minimum reveal specs in Concealed hinges brochure Arm assembly mounting plate Door thickness overlay - 4.5 Z Door height 7.5 31 38 15.5 4.6 11.4 Z = (Door height minus A) x 0.3 overlay 19-22 7.5 max. 1.4 min. Door thickness (mm) 16 19 22 24 A (mm) 45 34 23 15 Cornice and crown molding clearance Door thickness Abbreviations D = Mounting plate height K = Hinge arm crank OL = Overlay K = Hinge arm crank Straight arm crank = 0 mm Half cranked arm = 9.5 mm Full cranked arm = 18 mm Opening angle NOTE: Designed to be used in a lift up application only Door thickness (mm) 16 19 22 24 X (mm) 45 34 23 15 Opening angle = 95 CLIP top BLUMOTION 12 2015 Blum, Inc. Subject to technical modifications without notice

Planning specifications AVENTOS HK-XS Panel applications CLIP top BLUMOTION 95 37 W H 65 overlay door frame width NOTE: Use 3 hinges at cabinet width 914 (36") and/or power factor 156 and 4 hinges at cabinet width 1219 (48") and/or power factor 234 CLIP top BLUMOTION 95 Minimum reveal table 18 0.2 0.3 0.4 0.6 0.7 19 0.2 0.3 0.4 0.6 0.7 20 0.2 0.3 0.4 0.5 0.7 21 0.2 0.3 0.4 0.5 0.7 22 0.2 0.3 0.4 0.5 0.7 door 18 19 20 21 22 frame width T = door thickness 2.5 T Thickness greater than 22 trial recommended Installation Attach cup adapter to the hinge and insert into machined openings H Overlay P S 0 16 13.5 22 3 13 16.5 25 6 10 19.5 28 9 7 22.5 31 B = fixed Abbreviations H = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width T = Door thickness Attach using aluminum screws provided with hinges (699.110) Aluminum door preparation 18-22 0.8-2 Ø6 Dimensions in millimeters (inch equivalents as noted) 2015 Blum, Inc. 13

AVENTOS HK-XS Ordering information for TIP-ON 3 4a 4b 5 Well suited for small wall cabinets Cabinet height from 238 (9-3/8") to 610 (24") Interior depth minimum 127 (5") Opens with a light touch to the front Simple, virtually tool-free assembly and easy adjustment Symmetrical lift mechanism can be used on one or both sides Designed for use with free swing hinges 1 2 Step 1 Determine the power factor for the application Power factor = cabinet height (inch) x door weight including double handle weight (lb) Determine power factor To select the correct lift mechanism for a given application, the power factor must first be calculated by using the formula below. Use the table at the bottom of the page to convert ounces into decimal form for easy calculation. Example: Cabinet height: 15 inches (within possible range) Door weight including twice the handle weight: 9 lb 14 oz (14 oz =.9 lb see chart below) Total weight converted to decimal is 9.9 lb Power factor = cabinet height multiplied by door weight including twice the handle weight Power factor = 15 x 9.9 Power factor = 148.5 A power factor of 148.5 requires lift mechanism 20K1501 381 (15") NOTE: AVENTOS planning tools available at blum.com/planning door weight + twice handle weight = 9 lb 14 oz weight conversion chart oz 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 lb.1.1.2.3.3.4.4.5.6.6.7.8.8.9.9 14 2015 Blum, Inc. Subject to technical modifications without notice

Ordering information AVENTOS HK-XS Step 2 Select the required components Lift mechanism 1 NOTE: Two lift mechanisms are required for cabinet widths greater than 610 (24") Opening angle is 105 with CLIP top Power factor range (1 lift) Power factor range (2 lifts) 17 60 34 120 20K1101T 61 112 121 224 20K1301T 113 156 225 312 20K1501T Cabinet mounting plate 2 Screws EXPANDO 20K5101 20K51E1 Door mounting plate 3 Screws 20K4101 Hinge recommendations 4a 4b CLIP top 110, free swing Press-in Hinge mounting plate Screws 70T3580.TL 175H3100 TIP-ON mechanism set 5 Set includes: TIP-ON mechanism Self-adhesive, screw-on catch plate and screw Works for both overlay and inset applications Nylon gray For door heights greater than 400 mm use 956A1004 NOTE: Use of screw-on catch plate is required for all applications Standard doors 956.1004 Large doors 956A1004 NOTE: For other hinges and mounting plate options please refer to the Concealed hinges brochure Dimensions in millimeters (inch equivalents as noted) 2015 Blum, Inc. 15

AVENTOS HK-XS Planning specifications for TIP-ON Cabinet and door mounting plate locations for panel applications Lift mechanism Door mounting plate Space requirements * Y 32 126+D+K+OL 32 15.5+OL 1.5 minimum 200 minimum 37 125 minimum 27 Y = 137 + D + K Attach using #6 x 5/8" (606N/P) wood screw *Minimum top reveal based on hinge used. Please see minimum reveal specs in Concealed hinges brochure TIP-ON for AVENTOS specifications Door thickness Z Door height 50 (76)* min. 2.5 (3)* min. Screw-on catch plate 7.5 *For door heights greater than 400 mm use 956A1004 Z = (Door height minus A) x 0.3 Door thickness (mm) 16 19 22 24 A (mm) 45 34 23 15 Cornice and crown molding clearance Door thickness overlay Opening angle Pre-boring Ø2.5 mm countersunk pilot holes are required Abbreviations D = Mounting plate height K = Hinge arm crank OL = Overlay K = Hinge arm crank Straight arm crank = 0 mm Half cranked arm = 9.5 mm Full cranked arm = 18 mm Door thickness (mm) 16 19 22 24 X (mm) 45 34 23 15 Opening angle = 105 CLIP top free swing NOTE: Designed to be used in a lift up application only 16 2015 Blum, Inc. Subject to technical modifications without notice

Planning specifications AVENTOS HK-XS Panel applications CLIP top 110, free swing 37 W H 66.5 B overlay *13 NOTE: Use 3 hinges at cabinet width 914 (36") and/or power factor 156 and 4 hinges at cabinet width 1219 (48") and/or power factor 234 CLIP top 110, free swing Minimum reveal table 3 0.5 1.0 1.8 2.7 4.3 4 0.5 1.0 1.7 2.5 3.8 5 0.5 0.9 1.7 2.4 3.4 6 0.5 0.9 1.6 2.3 3.2 7 0.5 0.9 1.6 2.2 3.0 B = boring distance 16 19 22 24 26 T = door thickness For thickness greater than 26 trial app. recommended T *All 35 mm and 8 mm holes must be a minimum of 13 mm deep H Overlay P S 0 14 15 16 17 18 12 21.5 3 11 12 13 14 15 15 24.5 6 8 9 10 11 12 18 27.5 9 5 6 7 8 9 21 30.5 3 4 5 6 7 fixed distance B = boring distance = 11 Abbreviations H = Plate height P = Door protrusion S = Side arm protrusion W = Side panel width T = Door thickness Dimensions in millimeters (inch equivalents as noted) 2015 Blum, Inc. 17

AVENTOS HK-XS Installation Attaching AVENTOS HK-XS cabinet and door mounting plate 1 Attach cabinet mounting plate. 2 Attach door mounting plate. Insert hinge. 3 Attach door to the cabinet. Attaching AVENTOS HK-XS lift mechanism to cabinet 4 Attach the lift mechanism to cabinet mounting plate. 5 Attach lift mechanism to door. Warning: Risk of injury by spring-loaded lever arm! Do not push lever arm down Secure lever arm before installing cabinet 18 2015 Blum, Inc. Subject to technical modifications without notice

Adjustment AVENTOS HK-XS Adjusting the lift mechanism AVENTOS HK-XS door adjustment 1 ± 2 mm (± 1/16") 2 ± 2 mm (± 1/8") 1 2 3 1 2 3 3 ± 2 mm (+ 3/32" - 1/32") NOTE: CLIP top (COMPACT) adjustment Dimensions in millimeters (inch equivalents as noted) 2015 Blum, Inc. 19

AVENTOS HK-XS Assembly aids Universal individual template Used for AVENTOS locating pins and pre-boring for hinge mounting plates Can also be used for pre-boring holes for LEGRABOX, TANDEMBOX, and TANDEM drawer runners Calibrated scale for accurate setting Set includes: Universal individual template Ø2.5 mm and Ø5 mm stop collars Universal individual template 65.1051.02 Ø2.5 mm drill bit DB-2.5mm POZI DRIVER and bits A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum mounting screws. POZI screws can be identified by the distinctive tick marks located in the center of the screw head recess. Vix piloting bit For use in handheld drills #2 POZI DRIVER POZI DRIVER 1/4" Magnetic bit holder BIT HOLDER #2 x 1" POZI bit insert POZI BIT #2x1 #2 x 2" POZI bit insert POZI BIT #2x2 Ø2.8 mm piloting bit VPB-5 Deep thread wood screw Use to attach mounting plates to doors Fine thread aluminum screw Use to attach mounting plates to wide frame aluminum doors Deep thread aluminum screw Use to attach mounting plates to narrow frame aluminum doors 3.5 3.5 3.5 6 16 #6 x 16 mm, Phillips 606N #6 x 16 mm, Pozi 606P 13 7 #7 x13 mm fine thread 7072A 11 6 #6x11 mm deep thread 699.110 20 2015 Blum, Inc. Subject to technical modifications without notice

Part number index AVENTOS HK-XS Page no. 175H3100 7, 11, 15 20K1101 7, 11 20K1301 7, 11 20K1501 7, 11 20K1101T 15 20K1301T 15 20K1501T 15 20K4101 7, 15 20K4101A 11 20K4501 7 20K5101 7, 11, 15 20K51E1 7, 11, 15 20K5501 7 38N358B.08 7 39C358B.20 7 606N 20 606P 20 65.1051.02 20 699.110 20 7072A 20 70T3580.TL 15 71B3580 7 71B950A 11 956.1004 15 956A1004 15 BIT HOLDER 20 DB-2.5mm 20 POZI BIT #2x1 20 POZI BIT #2x2 20 POZI BIT DRIVER 20 VPB-5 20 2015 Blum, Inc. 21

Why choose Blum Blum, Inc. is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems. Virtually all of the hardware needed to assemble and make cabinets functional is available within the wide range of quality Blum products. Blum supports the U.S. market with a network of more than 150 dependable distributors, 40+ knowledgeable Blum sales representatives and an experienced customer service department. Commitment to manufacturing in the U.S. Blum manufactures many of its products in our 450,000 sq ft manufacturing, logistics and warehouse facility located in Stanley, North Carolina. Manufacturing closer to the customer allows Blum to react quickly to changing customer needs including unexpected surges in demand. Customer pickups and deliveries can be timed to better match their production schedules. Blum is committed to manufacturing in the U.S. for the U.S. market. Product development at Blum considers all of the various customers who will come in contact with our products. With this Global Customer Benefits philosophy we strive to create advantages for all users. Blum, Inc. is ISO 9001 certified which means that you are assured of consistent quality in every Blum product. What s more they exceed the requirements of ANSI/BHMA standards for cycle life, static load and self-closing performance. 23

Please visit blum.com for information on other Blum products LIT.AVT.1600.01.15 2015 Blum, Inc. Printed in the USA Blum, Inc. 7733 Old Plank Rd. Stanley, NC 28164 800-438-6788 blum.com