, - PDF Free Download

Meters and Indicators 1 l/min = 0.06m3/h 1 l/min = 0.21997 UK gal/min 1 l/min = 0.26420 US gal/min 1m3/h = 16.6667 l/min 1 UK gal/min = 4.546 l/min 1 US gal/min = 3.785 l/min

Meters and Indicators

Meters Flow Rate and Indicators Sight glass/rotor 360 viewing also suitable for overhead assembly Glass cleaning function Natural glass Compact unit Thread 1/4 to 1 Viscosity See table Max. pressure 16 bar Media temperature Max. 100ºC Pressure drop 0.25 bar at max. flow Housing Brass Ms 58, plated Tube Borosillicate glass Rotor POM - red Axle Stainless steel 1.4541 Bearing Peek Wiper NBR Seal NBR Installation Media water oil air/gas G Type L SW Weight kg 1/4 WR1-008 71 36 0,35 3/8 WR1-010 71 36 0,35 1/2 WR1-015 86 46 0,65 3/4 WR1-020 94 46 0,65 1 WR1-025 104 46 0,65 Ordering information Thread G Part number Min. flow l/min. to start rotor air water oil 40 cst 100 cst 1/4 WR1-008GMW - 0.7 1.5 2.7 4 3/8 WR1-010GMW - 0.8 1.5 2.8 8 1/2 WR1-015GMW - 1.4 1.8 3.2 12 3/4 WR1-020GMW - 1.4 2.7 5.9 25 1 WR1-025GMW - 1.7 3.0 7.0 40 1/4 WR1-008GMG 18 - - - 60 3/8 WR1-010GMG 20 - - - 150 1/2 WR1-015GMG 25 - - - 250 3/4 WR1-020GMG 25 - - - 250 1 WR1-025GMG 35 - - - 350 Max. flow l/min. water/air

Meters and Indicators

Meters Flow Rate and Indicators Variable area Vertical installation for flow from bottom to top Rugged metal design Natural glass Housing Anodised aluminium Connections Brass Ms 58 Glass Duran 50 Piston Brass Ms 58 Spring Stainless steel 1.4310 Magnet Hard ferrite Seal NBR Installation Media water oil G Type SW D L Weight kg 1/4 VF-008GA006 17 17 95 0.14 1/2 VO-015GA005 27 32 114 0.3 1 VO-025GA900 41 50 158 1.0 Ordering information Thread G 1/4 1/2 1 Part number Indicating range H 2 O ml/min. l/min. Max. flow I/min. H 2 O VF-008GA006 5-60 0.06 0.2 VF-008GA014 20-140 0.14 0.2 VF-008GA060 0.1-0.6 0.6 0.2 VF-008GA300 0.5-3 3 0.2 VF-008GA500 1-5 5 0.2 VO-015GA0005 0.1-0.5 0.5 0.3 VO-015GA0010 0.2-1.0 1 0.3 VO-015GA0016 0.4-1.6 1.6 0.3 VO-015GA0040 1-4 4 0.3 VO-015GA0080 2-8 8 0.3 VO-015GA0220 5-22 22 0.3 VO-025GA0450 15-45 45 0.3 VO-025GA0900 0-90 90 0.3 VO-025GA1500 60-150 150 0.3 p bar at max. flow

Meters Flow Rate and Indicators Piston switch Minimal pressure loss Good repeatability High switch capability Dirt-resistant Materials FW1- GP FW1- GM Housing POM glass fibre enforced Brass Ms58 nickel plated Piston POM POM Spring Stainless steel 1.4310 Stainless steel 1.4310 Magnet Bariumferrite Bariumferrite Seals NBR (DN8-10 only) NBR (DN8-10 only) Switch head Polycarbonate Polycarbonate Electrical data Reed switch Wiring 0.378 n.o 250 V AC, 0.5 A, 50 VA Connector M12x1, 4-pole Protection class IP 65 Tolerance ±10% of full scale Media temperature Max. 90 C Average pressure loss 0.3 bar at 25 l/min Hysteresis Depending on the switching value minimum 0.5 l/min Media FW1-015GP FW1-020G. - FW1-025G. free 1 brown 2 white 3 blue 4 black water oil FW1-008GM - FW1-010GM FW1-015GM Type L H B AF X Weight kg FW1-015GP006 85 30-27 12 0.04 FW1-020GP011 100 30 36-18 0.13 FW1-025GP011 100 30 40-18 0.17 FW1-008GM006 89 30 25-18 0.33 FW1-010GM006 89 30 25-18 0.31 FW1-015GM006 85 30 25-12 0.28 FW1-020GM011 100 30 36-18 0.72 FW1-025GM011 100 30 40-18 0.83 Ordering information Thread G Part number Max. pressure bar Max. flow I/min. H 2 O Adjustment range I/min. H 2 O POM brass 1/2 FW1-015GP006 10 20 1-6 3/4 FW1-020GP011 10 40 1-11 1 FW1-025GP011 10 60 1-11 1/4 FW1-008GM006 100 8 1-6 3/8 FW1-010GM006 100 10 1-6 1/2 FW1-015GM006 100 20 1-6 3/4 FW1-020GM011 100 40 1-11 1 FW1-025GM011 100 60 1-11

Meters Flow and Monitor Indicators Piston switch Installation independent of position High pressure and temperature capabilities Scaled switch point setting Materials - brass and stainless steel Low flow switching capabilities Materials RVM..GM RVM..GK Body Brass Ms 58, plated Stainless steel 1.4571 Piston Brass Ms 58 Stainless steel 1.4571 Spring Stainless steel 1.4310 Stainless steel 1.4571 O-ring NBR FKM Electrical data Reed switch Connector 43650-C Protection class IP 65 Installation N/O contact 200 V AC, 1 A, 20 VA Media water oil G Type L B Weight kg 1/4 RVM-008GM 65 17 0.14 RVM-008GK 65 17 0.14 Ordering information Thread G Part number P max. bar (stat) T max. ºC Max. flow mi/min. I/min. Adjustment range mi/min. H 2 O I/min. H 2 O p bar at max. flow bra ss stainless steel 1/4 1/4 RVM-008GM006 250 120 80 5-60 0.2 RVM-008GM014 250 120 170 20-140 0.2 RVM-008GM060 250 120 0.72 0.1-0.6 0.2 RVM-008GM300 250 120 3.6 0.5-3 0.2 RVM-008GK006 250 120 80 5-60 0.2 RVM-008GK014 250 120 170 20-140 0.2 RVM-008GK060 250 120 0.72 0.1-0.6 0.2 RVM-008GK300 250 120 3.6 0.5-3 0.2

Meters Flow and Monitor Indicators Piston switch Hermetical isolation of hydraulic and electrical components Installation independent of position High pressure and temperature duty Standard materials stainless steel 1.4305 and brass Ms 58 Materials MR..GK MR..GM Body Stainless steel 1.4305 Brass Ms 58, plated Piston Stainless steel 1.4305 Stainless steel 1.4310 Spring Stainless steel 1.4305 Brass Ms 58, plated O-ring FKM NBR Electrical data Reed switch Cable 2.5m Protection class IP 65 Change over 250 V AC, 1.5 A, 50 VA Installation Media water oil G Type L H AF X Weight kg 1/4 MR-008GM 109 56 36 12 0.85 3/8 MR-010GM 109 56 36 12 0.85 1/2 MR-015GM 109 56 36 12 0.80 3/4 MR-020GM 109 56 36 12 0.80 1 MR-025GM 135 56 40 18 1.50 Ordering information Thread Part number G P max. bar T max. ºC Max. flow I/min. H 2 O Adjustment range I/min. H 2 O p bar at max. flow brass stainless steel 1/4 MR-008GM004 200 120 10 0.4-4 0.5 3/8 MR-010GM010 200 120 20 1-10 0.5 1/2 MR-015GM020 200 120 40 5-20 0.5 3/4 MR-020GM040 200 120 60 10-40 0.5 1 MR-025GM060 200 120 80 20-60 0.5 1/4 MR-008GK004 200 120 10 0.4-4 0.5 3/8 MR-010GK010 200 120 20 1-10 0.5 1/2 MR-015GK020 200 120 40 5-20 0.5 3/4 MR-020GK040 200 120 60 10-40 0.5 1 MR-025GK060 200 120 80 20-60 0.5

Meters Flow and Monitor Indicators

Meters Flow and Monitor Indicators Paddle switch Good repeatability Low pressure loss Dirt resistant Stress free fixing of switch unit by plastic cap Materials Casing Brass Ms 58 Body Brass Ms 58 Paddle Stainless steel 1.4301; 1.4571 Spring Stainless steel 1.4310 Magnet Oxyd 300 Seal NBR Electrical data Reed switch wiring 0.225 n.c or n.o. depending on installation position 250 V AC, 1 A 50 VA Connector 1.5m cable Protection class IP 65 Tolerance ±15% of full scale Media Temp max. 110ºC Av. pressure loss 0.01bar at max. flow Hysteresis depending on switch value minimum 0.7 l/min Installation Media water oil Type H L X Weight kg UR1-010GM 81 50 10 0.35 UR1-015GM 81 50 10 0.35 UR1-020GM 82 50 12 0.35 UR1-025GM 86 50 12 0.40 UR1-032GM 90 50 12 0.55 UR1-040GM 93 50 12 0.60 UR1-050GM 102 50 12 1.00 brown blue brown blue Ordering information Thread G Part number PN bar Max. flow I/min. H 2 O Adjustment range I/min. H 2 O 3/8 UR1-010GM 25 10 2.5-3.5 1/2 UR1-015GM 25 20 4-4.5 3/4 UR1-020GM 25 40 5-6 1 UR1-025GM 25 60 9.5-11.5 1 1/4 UR1-032GM 25 80 13.5-17.5 1 1/2 UR1-040GM 25 100 30-38 2 UR1-050GM 25 150 42-53

Meters Flow and Monitor Indicators Paddle switch Powerful microswitch Compact dimensions All functional parts made of stainless steel Site adjustable switch Materials Housing Brass Ms 58, nickel plated Body Brass Ms 58, nickel plated Paddle Stainless steel 1.4301; 1.4571 Spring Stainless steel 1.4310 Magnet Oxyd 300 Seal NBR Electrical data UM3K UR3K Switch Micro switch - Reed switch - wiring 0.371 wiring 0.372 n.o. change over 230 V AC 1A 50VA 250 V AC 5A Connector DIN 43650-A DIN 43650-A Protection class IP 65 IP 65 Installation Type H UM = Microswitch UR = Reedswitch UM3K-010GM 87 UM3K-015GM 87 UM3K-020GM 88 UM3K-025GM 92 UM3K-032GM 96 UM3K-040GM 99 UM3K-050GM 108 Ordering information Thread G Part number PN bar Max. flow I/min. H 2 O Adjustment range I/min. H 2 O 3/8 UM3K-010GM055 25 10 4-5.5 1/2 UM3K-015GM070 25 20 5.5-7 3/4 UM3K-020GM100 25 40 7.5-10 1 UM3K-025GM180 25 60 14-18 1 1/4 UM3K-032GM300 25 80 22-30 1 1/2 UM3K-040GM500 25 100 37-50 2 UM3K-050GM930 25 150 67-93 3/8 UR3K-010GM055 25 10 4-5.5 1/2 UR3K-015GM070 25 20 5.5-7 3/4 UR3K-020GM100 25 40 7.5-10 1 UR3K-025GM180 25 60 14-18 1 1/4 UR3K-032GM300 25 80 22-30 1 1/2 UR3K-040GM500 25 100 37-50 2 UR3K-050GM930 25 150 67-93

Meters Flow and Monitor Indicators Paddle switch Rugged unit with proven protection by bellows Powerful microswitch 250 V 15 A (8 A ind.) Easy assembly Minimum pressure loss Brass and stainless steel wetted parts Materials CRG-..HM CRG-..HK Casing Ms 58 1.4571 Paddle 1.4571 1.4571 Bellow Tombak 1.4571 Max. pressure 11 bar Max. temperature 120ºC Pressure drop 0.08 bar at max. flow Electrical data Microswitch 250V AC 15 A (8 A ind.) Electrical connection PG 13.5 Protection class IP 65 Installation Ordering information Thread G Part number Brass Part number Stainless steel Tube Ø Flow range m 3 /h water Paddle type 1 CRG-025HM CRG-025HK 25 0.6-2.0 1 1 CRG-025HM CRG-025HK 32 0.8-2.8 1 1 CRG-025HM CRG-025HK 40 1.1-3.7 1 1 CRG-025HM CRG-025HK 50 2.2-5.7 1, 2 1 CRG-025HM CRG-025HK 65 2.7-6.5 1, 2 1 CRG-025HM CRG-025HK 80 4.3-10.7 1, 2, 3 1 CRG-025HM CRG-025HK 100 11.4-27.7 1, 2, 3 1 CRG-025HM CRG-025HK 150 35.9-81.7 1, 2, 3 1 CRG-025HM CRG-025HK 200 72.6-165.7 1, 2, 3 1 CRG-025HM CRG-025HK 250-300 156.0-290.0 1, 2, 3

Meters Flow and Monitor Indicators Calorimetric No moving parts High-quality stainless steel wetted parts High temperature gradient, short reaction time Materials Sensor 1.4571 Casing PA 66 Electrical data Supply voltage 24 V DC ± 20% Power consumption Max. 70 ma Switching current 300 ma Voltage drop Approx. 1 Volt Connection Cable 2m Output PNP, short circuit proof Indication LED, 9 light emitting diodes red = limit value green = 1-8 Protection class IP 60 Installation Media water oil aggressive liquids G Type H L L1 SW 1/2 EFKP-015HK029P 50 90 30 27 PNP 1 4 3 brown blue black + z OV Ordering information Thread G Part number Max. pressure bar Max. temperature ºC Activation sensitivity cm/s water Hysteresis % 1/2 EFKP-015HK029PS 100 70 1-150 15

Meters and Indicators

Meters Flow Rate and Indicators Meters Variable area Full acrylic design Full-surface print of scale Brass fittings Additional needle valve (option) Casing Acrylic Float Glass, stainless steel Stops Stainless steel Seals Valve Fittings FKM Brass Brass Installation Media water air/gas NPT Type A B C D E F G 1/8" UK-020GM 102 76 30 41 13 28 54 50 1/8" UK-040GM 165 140 38 89 13 28 54 60 mounting plate: 1/8" thick, 2 bores incl. thread 10/13" / M 5 G Ordering information NPT Part number P max. bar T max. ºC Range I/min. air I/h H 2 O p limit value of scale bar Accuracy (20 ºC) series 020 scale 40 UK-020GML0000 6 60 0.04-0.5 0.1 ±5% SEW UK-020GML0001 6 60 0.1-1 0.1 ±5% SEW UK-020GML0005 6 60 0.4-5 0.1 ±5% SEW UK-020GML0025 6 60 2.5-25 0.1 ±5% SEW UK-020GMW0003 6 60 0.2-3 0.1 ±5% SEW UK-020GMW0006 6 60 0.5-6 0.1 ±5% SEW UK-020GMW0015 6 60 1-15 0.1 ±5% SEW UK-020GMW0040 6 60 4-40 0.1 ±5% SEW UK-020GMW0080 6 60 10-80 0.1 ±5% SEW 1/8 series 040 scale 90 UK-040GML0010 6 60 1.0-10 0.1 ±3% SEW UK-040GML0020 6 60 2.0-20 0.1 ±3% SEW UK-040GML0030 6 60 3.0-30 0.1 ±3% SEW UK-040GML0050 6 60 4.0-50 0.1 ±3% SEW UK-040GML00100 6 60 10.0-100 0.1 ±3% SEW UK-040GMW0014 6 60 1.0-14 0.1 ±3% SEW UK-040GMW0040 6 60 4.0-40 0.1 ±3% SEW UK-040GMW0080 6 60 8.0-80 0.1 ±3% SEW UK-040GMW0220 6 60 20.0-220 0.1 ±3% SEW air water air water

Meters Flow Rate and Indicators Meters Piston Horizontal installation position, measuring unit upwards Mechanical operation, independent of pressure Good scale resolution Wide measuring ranges Materials TZ1-..GR Casing Bronze RG 5/RG 6, plated Piston Ms 58, plated Spring Stainless steel 1.4310 Seals NBR Max. pressure Media temperature Pressure drop 1/2 = 100 bar 3/4 to 1 = 25 bar 1 1/4 to 2 = 16 bar Max. +90ºC 0.25 bar at max. flow Installation Media water oil G Type H L SW Weight kg 1/4 TZ1-008GR 212 67 29 1,3 3/8 TZ1-010GR 212 67 29 1,3 1/2 TZ1-015GR 212 67 29 1,3 3/4 TZ1-020GR 212 73 32 1,4 1 TZ1-025GR 214 87 41 1,7 1 1/4 TZ1-032GR 256 98 52 2,3 1 1/2 TZ1-040GR 226 114 59 2,8 2 TZ1-050GR 234 138 72 6,1 Ordering information Thread G Part number Flow rate l/min. 1-100 cst Max. flow l/min. 1-100 cst Max. pressure bar 1/4 TZ1-008GR006 2-6 8 100 3/8 TZ1-010GR012 3-12 12 100 1/2 TZ1-015GR020 4-20 20 100 3/4 TZ1-020GR040 10-40 40 25 1 TZ1-025GR060 10-60 60 25 1 1/4 TZ1-032GR100 10-100 100 16 1 1/2 TZ1-040GR150 10-150 150 16 2 TZ1-050GR250 20-250 250 16

Meters Flow Rate and Indicators Meters Flow meter/switch Fast response time Large over-load capacity Low pressure loss Wide flow range Housing PPS Connection Brass nickel plated Flap Stainless steel 1.4031k Flap fastener PVDF Indicator Cobalt samarium Seal FKM Tolerance 3% of measured value minimum 0.25 l/min Media temperature 0..70 C Max. pressure 16 bar Current - / voltage output Idle current 100 ma Output Current 4..20 ma voltage 0..10V Supply voltage 10..30 V DC Connection M12x1, 4-pole Short-circuit proof Yes Reverse polarity proof Yes Protection class IP 67 Installation Media water brown 1 + 4 3 black z blue output 0 V white 2 prograing L X Weight kg 74 12 0.60 74 12 0.60 78 14 0.60 82 16 0.65 Ordering information Thread Part number G Range I/min. H 2 O Max. flow I/min. H 2 O 1/4 XF-008GMI015 1-15 l/min 20 3/8 XF-010GMI025 1-25 l/min 40 1/2 XF-015GMI050 1-50 l/min 80 3/4 XF-020GMI080 1-80 l/min 100

Flow Meters Rate and Transmitters Indicators Rotor Fully plastic design High pulse resolution Good linearity Wide measuring ranges Viscosity up to 10 cst Materials RRI- P Casing POM Adapter PVDF Rotor PVDF Caps 1.4310 Shaft Ceramics Bearings Iglidur X O-ring FKM Electrical data Supply voltage 5-30 V DC Residual ripple ± 10 % Max. power consumption 10 ma Max. output current 200 ma Output 4-29 V, square signal Output switch PNP Frequency 10-1000 Hz max. Protection class IP 67 Connection Cable 2m Installation Media water oil up to 10 2 /s air/gasses option ball bearing G Type H H1 L L1 Weight kg 3/8 RRI-010GVP 50 38 50 85 0.2 1 RRI-025GVP 70 33 70 110 0.5 PNP 1 4 3 brown black blue z + 5..30 VDC signal 0 V Ordering information Thread G Part number P max. bar T max. ºC Measuring I/min Pulses / I Max. flow I/min. p bar at max. flow RRI-010GVP020V10 16 60 0.1-1.5 10200 3 0.5 3/8 RRI-010GVP050V10 16 60 0.2-10 3345 15 0.5 RRI-010GVP070V10 16 60 0.4-12 1755 20 0.5 RRI-025GVP080V10 16 60 2-30 1216 36 0.5 1 RRI-025GVP120V10 16 60 3-60 607 72 0.5 RRI-025GVP160V10 16 60 4-100 252 120 0.5

Meters and Indicators

Meters Flow Rate and Indicators Meters Flow regulator Simple installation Compact design Switch option Wide range available Materials KH.-015GM Body Brass Ms 58 Orifice Brass Ms 58 Magnet Bariumferrite Spring Stainless steel 1.4310 Snap ring Copper Seal NBR Switch head POM Differential pressure 2.5-30 bar Tolerance ±15% minimum 1l/min Media temperature Max. 120 C Max. pressure 200 bar Electrical data Reed switch Wiring 0.378 n.o. 300 V AC 0.15 A 10 VA Signal Activated by approx. 30% of nominal flow rate Connector M12x1, 4-pole Protection class IP 65 Installation Media water free 1 brown 2 white 3 blue 4 black Ordering information Part number Regulation rate l/min water KH015GM001 1 KH015GM002 2 KH015GM003 3 KH015GM004 4 KH015GM005 5 KH015GM006 6 KH015GM007 7 KH015GM008 8 KH015GM009 9 KH015GM010 10 KH015GM012 12 KH015GM016 16 KH015GM020 20 KH015GM025 25 KH015GM030 30

Meters Level and Switch Indicators Level switch High switch capability Side wall mounting Reliable Good repeatability Materials NW1-020HM NW1-020HK Housing Stainless steel 1.4571 Stainless steel 1.4305 Socket Ms 58 nickel plated Stainless steel 1.4571 Wetted parts Stainless steel Stainless steel 1.4310; 1.4571 1.4310; 1.4571 Float Spansil Stainless steel 1.4571 Magnet Oxyd 300 Oxyd 300 Seal NBR FKM Electrical data Reed switch Wiring 0.225 n.c. or n.o. depending on installation position 250V AC 1 A 50 VA Cable 1.5m Protection class IP 65 Installation 1 2 1 2

Meters and Omni Indicators Omni - general description M12x1 connector System mounting to all HONSBERG primary sensors (rotatable) Customer based zero calibration Compact dimensions IP 67 Stainless steel housing Mineral glass (tempered, scratch and break proof) Operating instructions The prograing ring can be swivelled to Pos.1 and Pos.2. The following actions are possible: A - Display of parameters with Pos. 1 (simultaneous display of the set parameters) Turn the gap in the ring to Pos. 1 - Switching points S 1 and S 2: Switching points in the selected unit. - Hysteresis direction of S1 and S2: Max = Hysteresis under S1 or S2 Min = Hysteresis above S1 or S2 - Hysteresis Hyst 1 and Hyst 2: Hysteresis values of the switching points in the selected unit. - Code: After entering the code 111 other parameters can be set (should only occur if necessary): - Filter: Selectable filter constant in seconds (affects display and output). - Units: e.g. bar or psi... - Output: 0...20mA or 4...20mA - 4 (0) ma: Value specification for 4 (0) ma - 20mA: Value specification for 20mA B - B- Editing with Pos. 2 Turn the ring gap to Pos. 2 and a flashing "cursor" appears showing the position to be changed. By repeated turning to Pos. 2 the values are increased and by turning to Pos. 1 you obtain the next position. Each position can be edited in this way. If no action is made within 5 s, the device returns to the normal display section without the change being accepted. C - C- Saving the change with Pos. 1 Turning 1x to Pos. 1 after quitting the last value signifies acceptance of the change. Prograing protection: The prograing ring can be pulled off, turned through 180 and replaced. Then prograing is no longer possible on turning the ring further. Example of hysteresis setting: S1 as max. switching point and as min. switching point) Value S1max Value Alarm range Hyst 1 Hyst 1 Alarm range Time Time S1min

Meters and Omni Indicators Omni - F Flow sensor Flow indicator without moving parts Very fast reaction times for a calorimetric system Medium in contact with only one material Analogue output, frequency output, switching outputs Clear, easily readable, backlit LCD display Changeable units in the display Designed for industrial applications Small and compact Simple installation Omni - P and Omni P1 Pressure sensor Analogue output, two switching outputs Clear, easily readable, backlit LCD display Changeable units in the display Designed for industrial applications Omni - T Temperature sensor Universal temperature sensor Analogue output, switching outputs Clear, easily readable, backlit LCD display Changeable units in the display Designed for industrial applications Small and compact Omni - L Level transmitter Ultrasonic level and distance gauge with display Compact design Adjustable limits and hysteresis Extreme value memory Freely convertible and scalable 4-20mA output Trend and digital displays Super-bright signalling LED

Omni/Flex product overview Flow Switches, Meters Flow Rate and Indicators Meters By combining the accuracy and versatility of the Omni and Flex electronics with the proven principles of the existing flow technologies has resulted in a product range with a choice of outputs and materials to suit most applications. Model-HD Function Piston Brass, nickel plated 1/4-1 0,5-60 l/min. 200 bar See page 96 Model-RRI Function Rotor Plastic/Brass/Stainless steel 1/4-1 0,1-100 l/min. 10 bar See page 107 Model-RT Function Turbine Stainless steel 1/4-2 0,11-68 m 3 /h 250 bar See page 108 Model-VHZ Function Gear wheel Aluminium/Stainless steel 1/4-1 0,02-150 l/min. 100 bar See page 109 Model-LC Function Float Brass/Stainless steel 1-2 connection thread 250-2000 10 bar For more information contact Pressure & Flow direct.

Meters and Indicators