CARBON & SULPHUR APPARATUS The determination of carbon and Sulphur contents in iron & steel has become an absolute necessity for all chemical and metallurgical laboratories. Iron & steel plants, Foundries and forging units etc. There is a substantial saving of time in a short time. The dual determination is excellently suitable for Routing analysis. (Different Range of Carbon Burette Available (0.25%, 0.5%, 1.5%, 4.5%) To work on 220 / 230 volt A.C Supply. We reserve the right to change the Design and specifications without Prior notice
DIGITAL MUFFLE FURNACE The Furnace outer body is made of thick Mild Steel Sheet reattached with perforated sheet on the bottom portion and painted with attractive Power Coated Paint. Inner chamber made of ceramicc grooved Tile Set, heating elements are made of Kanthal A 1 wire in coil form U Shape, insulation by ceramic Fiber Wool heat resistance, Temp. Controlled by Digital Temperature Controller fitted in front base of the Furnace with L & T Contactor and Cr / Al Thermocouple. To work on 220 / 230 volt A.C Supply. AVAILABLE IN DIFFERENT SIZE INNER CHAMBER SIZE RATING Max. Temp. Working Temp. 4 x 4 x 9 3.0 KW 1200 Deg. C 700 to 1100 Deg. C 6 x 6 x 12 4.0 KW 1200 Deg. C 700 to 1100 Deg. C 8 x 8 x 12 5.0 KW 1200 Deg. C 700 to 1100 Deg. C 12 x 12 x 24 8.0 KW 1200 Deg. C 700 to 1100 Deg. C NOTE: High Temp. Furnace, upto 1450 0 C is also available We reserve the right to change the Design and specifications without Prior notice
HOT AIR OVEN Double Walled with two adjustable Shelves, inside made of thick Aluminium or Stainless Steel & outside of Mild Steel Sheet finished in Durable White Powder Coated Paint. The gap between two walls is filled with Pure Glass Wool to minimize loss of temperature. Temperature can be controlled by Digital Temp. Controller or Thermostate. Different type of Temp. Range available 200 0 C, 250 0 C, 300 0 C, 350 0 C. Air Circulating Fan can be provided on request AT AN EXTRA Cost. Inner Chamber Size 14 x 14 x 14 18 x 18 x 18 24 x 24 x 24 Power Supply Single Phase Single Phase Single Phase Digital Control Thermostatic Control We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
LABORATORY DISC PULVERSIER Laboratory Pulveriser is a Disc type grinder, especially designed to grind virtually material (Sponge Iron / Concrete / Iron Ore) to produce a fine mesh sample. It is self contained grinder with a rotary disc, having a planetary movement in a vertical plane. Grinding is done in between two discs one stationary and the other revolving eccentrically at high speed. A self locking device holds the hinged. Disc Diameter 175mm Max. Feed size Upto 6mm Discharge Size 100 Mesh Approx. Electricc Motor 3 hp 3 Phase We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
LABORATORY JAW CRUSHER This machine specially design for crushing Iron Ore, Sponge Iron, coal and Concrete for preparation of Sample in lab testing. Sponge Iron / Iron Ore Coal / Concrete Jaw Size 4 x 6 6 x 8 8 x 12 4 x 10 6 x 12 8 x 16 Feed Size 25 30mm 45 50mm 65 70mm 25 30mm 45 50mm 65 70mm Discharge Size 6 20mm 10 22mm 12 25mm 6 20mm 10 22mm 12 25mm Motor 3 hp 5 hp 10 hp 3 hp 5 hp 10 hp Motor RPM 1440 rpm 1440 rpm 1440 rpm 1440 rpm 1440 rpm 1440 rpm Power Supply 3 Phase 3 Phase 3 Phase 3 Phase 3 Phase 3 Phase We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
LABORATORY HOT PLATE This hot plate is very useful for continuous heating Upto maximum 250 0 C Rectangular plate of cast iron Machined to a smooth & leveled surface having Insulated elements is fitted on a robust mild steel body enamel painted. Temp. Controlled by Thermostate [50 0 C to 250 0 C]. To work on 230 volts A.C complete with cord & plug. AVAILABLE IN DIFFERENT SIZE SIZE RATING 10 [W] x 12 [L] x 6 [H] 1000 Watt 10 [W] x 16 [L] x 6 [H] 1200 Watt 12 [W] x 18 [L] x 6 [H] 2000 Watt 18 [W] x 24 [L] x 6 [H] 3000 Watt (Hot Plate Rectangular) This Round Shape Hot Plate is very useful for heating upto 200 0 C. Body of the plate is made of mild steel sheet Enamel painted. The top of the plate is of 8 Diameter with Energy Regulator Dia : 8 Round (Hot Plate Round) We reserve the right to change the Design and specifications without Prior notice
MAGNETIC STIRRER & HEATING MANTLE Outer Body made of Mild Steel Powder Coated with Stainless Steel Top. Stirring And Heating Units Are Properly Insulated with Heating System, Temp. Is Controlled by an Energy Regulator, Electronic Speed Controller and Teflon Coated Paddle, Heating System Capacity 2 Ltr / 5 Ltr / 10 Ltr / 20 Ltr Power Supply Single Phase Temp. Range Upto 75 0 C Magnetic Stirrer With three heat control and energy regulator. Capacity : 500ml, 1 Liter, 2 Liter, 3 Liter, 5 Liter, 10 Liter, Power Supply Single Phase Temp. Range Max. 400 0 C ` Heating Mantle We reserve the right to change the Design and specifications without Prior notice
WATER DISTILLATION UNIT This apparatus is used for Distilled Water, Outer Body made of Stainless Steel [SS 304 Grade with Organ Welding] with electric Cord, Socket & Plug. Wall Mounting Type Table Pattern Type Water Capacity 3 / 4 Ltr Per Hour 6 Ltr Per Hour 8 / 9 Ltr Per Hour Load 3 K.W 4 K.W 9 K.W Power Supply Single Phase Single Phase Three Phase Wall Mounting Type Table Pattern Type We reserve the right to change the Design and specifications without Prior notice
SPECTRO POLISHING MACHINE This machine is very useful for preparation of Spectro sample very fast and clean. Outer body Made of thick M.Steel sheet with powder coated rust proof paint. Aluminium Oxide Disc 350mm Dia Available in 60 Grit and 120 Grit. Magnetic Holder also available for Micro Sample Motor for Disc Motor for Blower 2hp 3 phase 1 hp 3 phase Disc Size 350mm [14 ] Motor RPM ON / OFF Switch LOAD on Disc 2800 / 1440 rpm L & T Make Upto 1 Kg We reserve the right to change the Design and specifications without Prior notice
ABRASIVE CUT OFF MACHINE The chop type cut off wheel machine is suitable for quick and clean cutting of metallographic specimen from rods & tubes etc. Abrasive cutter is rugged, sturdy and designed to cut Metallurgical Samples to optimal quality consistently and safely. Cutting Wheel spindle is connected with motor shaft by pulley and belt mechanism. The movement of cutting wheel towards the specimen is applied by handle fixed with motor base pivot spindle and the cutter unit is balanced by springs for smooth chop type movement. SENIOR MODEL JUNIOR MODEL Cutting Cap. 3 Round 2 Round Coolant Tank 50 Ltr 30 Ltr Coolant Pump Tullu Type [Heavy] Tullu Type Electric Motor 5 hp Three phase 3 hp Three phase Cutting Wheel 250/300mm Dia 200/250mm Dia Motor (rpm) 2800 rpm 2800 rpm Vice Four side Movable Two side Movable We reserve the right to change the Design and specifications without Prior notice
METALLURGICAL POLISHING MACHINE Metallographic specimen polishing machine is suitable for the polishing of the specimen which has been grinded. The specimen surface is very smooth after processing and can be used to observe and measure the metallographic structure of specimen under microscope. Double Disc Polishing Machine Single Disc Polishing Machine Electric Motor ½ hp + ½ hp ½ hp Motor RPM 1440 rpm 1440 rpm Power Supply Single Phase Single Phase Disc Dia 8 Round with S.S. Wash Basin Double Disc Single Disc We reserve the right to change the Design and specifications without Prior notice
DIGITAL BOMB CALORIMETER Used for determination of heat combustion of organic Matter and calorific value and sulphur content of coal, Solid and Liquid Fuels. The Bomb has a capacity of 300ml approx. a provided with a high Pressure Schroder valve. Tested as per the requirement of Institute of Petroleum. Supplied with, Bomb Calorimeterr Vessel with bomb support, Water Jacket, combined lid for calorimeter Vessel and PUF Jacket, stirrer, connecting leads, connecting Tube to Connect Bomb and pressure Gauge. Connecting Tube with fine Adjustment valve to Connect Pressure Gauge and Oxygen Cylinder pressure gauge on stand, spanner for Oxygen Tube Connection, Ignition Wire (2metres) Nicrome, Cotton Reel, Stand For unit, pellets press, Digital Beckman Thermometers O Ring small, O ring for Stirrer, Valve for Bomb and Valve Key. Supplied Without oxygen cylinder. To work on 220 / 230 volt AC Supply. NOTE: Bomb Calorimeter with Printer also avaialble at an Extra Cost We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
WEIGHING BALANCES Chainometic Balance Single Pan Balance Plaform Balance Digital Top Loading Balance TYPE Digital Top Loading Single Pan [Electrical] Chainometic Double Pan [Manual] Platform Balance CAPACITY 220gm 200gm 200gm READABILITY 0.001gm [3 Digit] 0.0001gm [4 Digit] 0.1mgm 0.1mgm 60Kg to 500Kg 5gm to 50gm To Work on 220 / 230 volt AC Supply MAKE Shimazdu / Excel Leader / Dhona Leader / Dhona Excel We reserve the right to change the Design and specifications without Prior notice
HOT MOUNTING PRESS Metallurgical Mounting Press is designed for permanent mounting of metallographic or rock specimen in thermosetting plastic, we offer Bakelite Mounting Press. The Unit of a rugged construction and is activated by a hydraulic press, capacity 10 tones. The unit is provided with a pressure gauge to read the pressure being applied while mounting. The Press is supplied complete with Mould Heater, cooler and Thermometer. As a standard outfit, 25mm dia. NOTE: Mould assembly is supplied with machine, other sizes if mould assembly can be supplied as additional accessories at an extra cost. Mould diameter 25 / 32 / 40mm Hydraulic Jack 10 TONE Temperature Range 0 to 300 Deg. C Power Supply Single Phase. We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
LABORATORY ROLL CRUSHER This Crusher specially designs for crushing Sponge Iron, coal and Concrete for preparation of Sample in lab testing. Roller Size 4 x 8 4 x 10 6 x 10 6 x 12 10 x 12 Feed Size 10mm 12mm 15mm 17mmm 20mm Discharge Size 2mm or above 2mm or above 2mm or above 2mm or above 2mm or above Motor 3 hp 3 hp 3 hp 5 hp 5 hp Motor RPM 1440 rpm 1440 rpm 1440 rpm 1440 rpm 1440 rpm Power Supply 3 Phase 3 Phase 3 Phase 3 Phase 3 Phase We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
LABORATORY BELT GRINDER Linisher is a continuous belt grinder. When the sample irregular, its surface needs leveling in order to render it suitable for mounting. This is achieved on Linisher belt. The Linisher consist of a continuous emery belt of size 4 width. The Belt travels on two aluminium pullies, one of which is directly coupled to motor. The other pulley is fitted on a spindle in a dolley which is spring loaded thus offering quick changing of worn out belts. The design also incorporate axial adjustment to align the belt in proper position. Emery Belt Size 100 x 915mm Electric Motor Working Area ½ hp Single Phase 4 x 7 Approximately We reserve the right to change the Design and specifications without Prior notice
THERMOCOUPLES / CABLES / INDICATORS & CONTOLLERS TYPE TEMP. RANGE J Type Upto 300 0 C K Type Upto 1000 0 C R Type 13% Upto 1600 0 C R Type 17% Upto 1800 0 C Thermocouples Cable for Thermocouples [PVC / Asbestos / Fiber Glass / Steel Breaded] Temp. Controller PID Controller Non Contact Temp. Gun We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
THERMOMETERS/HYDROMETERS We reserve the right to change the Design and specifications without Prior notice
BAROMETERS BAROMETER [DIAL TYPE] FORTIN BAROMETER (Mercury) DIGITAL BAROMETER We reserve the right to change the Design and specifications without prior notice Email: kishorelab@gmail.com, kishorinter@yahoo. com
B.O.D INCUBATOR (Low Temp.) Most versatile for Biochemical Oxygen Demand (BOD) determinations. Double walled with inner chamber S.S. and outer wall of M.S. Sheet duly powder coated. The gap of 75 mm between the outer and the inner wall is fitted with special grade glass wool to prevent thermal losses. Triple walled back of the unit is fitted with two air circulatic fans for maintaining temperature uniformity throughout the chamber. Temperature From 5 0 C to 50 0 c is controlled by Micro Processor Digital Temperature Indicator-Cum- Controller with an accuracy of ± 0.1 C. To work on 220/230 A.C. supply Single Phase. NOTE: Automatic Voltage Stabilizer 3 KVA At an Extra Cost INNER CHAMBER SIZE CAPACITY 450 x 600 x 400mm (18 x 24 x 16 ) 4 Cu ft (113 Ltr.) 500 x 850 x 425mm (20 x 34 x 17 ) 6.1 Cu ft (172 Ltr.) 575 x 875 x 550mm (23 x 35 x 22 ) 10 Cu ft (283 Ltr.) 650 x 900 x 550mm (26 x 36 x 22 ) 12 Cu ft (339 Ltr.) We reserve the right to change the Design and specifications without prior notice Email: kishorelab@gmail.com, kishorinter@yahoo. com
HUMIDITY CHAMBER Suitable for carrying out different quality control tests under Controlled conditions of temp. & humidity. Inner chamber consist of S.S. and outer wall of M.S sheet duly powder coated. The gap of 75mm between the outer and inner wall in filled with special grade glass wool / puf insulation to prevent Thermal losses. A self cooler air circulating fan is fitted to maintain uniform temp. And humidity Conditions throughout the chamber Temp. range from 5 0 C above ambient to 60 0 C is controlled by Digital Temp. & Humidity Controller with an accuracy of +2%. Humidity is controlled through an HUMIDISTATT thus controlling the desire set humidity range from Atmospheric humidity to 90 0 C + 3 0 C. NOTE: Cooling facility also available at an extra cost. To Work on 220 / 230 volt A.C Supply INNER CHAMBER SIZES 455 [W] x 710 [H] x 455mm [D] 605 [W] x 605 [H] x 605mm [D] 605 [W] x 910 [H] x 605mm [D] We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
Ph / CONDUCTIVITY / TDS / TURBIDITY METER Ph METER [Table Model] Ph METER [Pen Type] TDS METER [Table Model] TDS METER [Pen Type] CONDUCTIVITY METER [Table Model] TURBIDITY METER We reserve the right to change the Design and specifications without prior notice
SALT SPRAY CHAMBER FRP Chamber Salt Spray Acrylic Sheet Chamber FEATURES Wall Inner Chamber Outer Chamber Temp. Control Humidity Humidity Controller Temp. Accuracy Humidity Accuracy Inner Chamber Size Test Standard Power Supply FRP / SS SALT SPRAY ACRYLIC SHEET SALT SPRAY Double Walled Single Walled FRP / S.Steel Acrylic Sheet Mild Steel Painted Acrylic Sheet Ambient to 65 0 C Upto 30 0 C 95% to 99% 90% to 95% Fitted + 3 0 C + 3% RH NIL + 5 0 C + 5% RH 800 x 550 x 550mm 680 x 410 x 410mm Customize Customize 220 / 230 volt 50Hz 220 / 230 volt 50Hz We reserve the right to change the Design and specifications without prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
WATER BATH Double walled with inner chamber made of S.S Sheet and outside of M.S. duly powder coated. The gap between the walls is filled with special Grade glass wool in order to avoid thermal loses. A drain plug is also fitted to the unit. The Inner chamber fitted with immersions type heating element is covered with perforated Removable diffuser tray. The cover is provided with the unit as a standard accessory. Temp. From ambient to 100 0 C is controlled by Digital Temperature Controller. NOTE: Water circulating pump an extra cost. / stirrer at To work on 220/230 volt A.C supply. DIGITAL Double Walled with inner chamber made of S.S Sheet and outside of M.S duly powder coated. Temperature controlled by Thermostatic controller. AVAILABLE INNER CHAMBER SIZES 300 x 250 x 100mm 6 Hole of 75mm dia 405 x 355 x 100mm 12 hole of 75mm dia THERMOSTATIC We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
CROSS HATCH CUTTER Cross Hatch cutter is suitable for checking adhesion of coating by cross cut method. This cutter having single cutting blades. Test is carried out by performing crossed cuts at right angle. After clear with Adhesionm Tape or brush. Can be used in accordance to ASTM D 3359 and IS 101. 1mm x 11 Blades 2mm x 6 Blades 3mm x 5 Blades Coating Upto 60 Micron Coating Upto 61 Micron to 120 Micron Coating Upto 120 Micron to 250 Micron We reserve the right to change the Design and specifications without prior notice
PENCIL HARNDESS TESTER Pencil Hardnerss Testert is suitable to determine the resistance of coating materials to scratch effect on the surface. Can be used in accordance to ASTM D 3363 and IS 101. In the test pwncils of various degrees of hardness are moved over the surface under a fixed pressure and angle to the surface. The degree of hardness of the pencil which damages the surface is taken as a measurement of scratch hardness. AVAIALBLE RANGE OF PENCIL: 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 3H, and 4H We reserve the right to change the Design and specifications without prior notice
CONICAL MANDREL TESTER Conical Mandrel is used for determination of extensibility of painted Panels, which are clamped, is Position & Formed round the Conical Mandrel by rotating of the roller frame. The 200mm Mandrel tapers from 37mm to 6mm diameter which can be measured with the help of scale. After test the panels are examined to determine Minimum diameter at which failure by elongation occurs. Can be used in accordance to ASTM D 522 and ISO 6860. We reserve the right to change the Design and specifications without prior notice
COATING THICKNESS GUAGE INDIAN DEFELSKO USA PENCIL TYPE TYPE BASE RANGE Coatmeasure M2 Coatmeasure C Coatmeasure M & C DEFELSKO USA Pencil Thickness Guage Ferrous Model 0 2000 Micron Non Ferrous Model 0 1250 Micron Ferrous & Non Ferrous 0 2000 Micron Ferrous Model 0 1000 Micron 0 250 Micron / 50 800 Micron We reserve the right to change the Design and specifications without prior notice Email: kishorelab@gmail.com, kishorinter@yahoo. com
TUBULAR IMPACT TESTER Many surface coating are subject to the risk of damage by Impact. Impact Tester allow reproducible condition of Impact to be defined. The instruments consist of a graduated vertical tube mounted into a solid base. This tube act as a guide for an impacting weight of pre determined mass. The height from this falls is variable. Standard Tube Length 25 and 40 Different Weight 2 LB, 4 LB and 6 LB We reserve the right to change the Design and specifications without prior notice
PORTABLE GLOSS METER Compact, portable, sensitive & accurate handy instrument, battery operated for the measurement of different geometry 45 degree, 60 degree, 85 degree. Suitable to check gloss value of curved as well as flat surfaces, tiny and large objects. Portable Gloss Meter with a Micro Controller base display and rechargeable batteries. Unit is small and light weight HOLD Facility We reserve the right to change the Design and specifications without prior notice
Available 210 Shads in the form of different sizes. RAL K7 RAL K5 RAL K1 SHADE CARD 5 Colors per page Fan Deck Size 1.97 x 5.9, Color Sample 1.97 x.79 Gloss Well Suited for Color Combination & Comparison Full Page Color Sample 1.97 x 5.9 Semi Matte or Gloss U Shaped Protective cover 16 Colors per page Booklet Size 4.09 x 7.48, Color Sample 1.1 x.71 Gloss RAL SHADE CARD PANTONE SHADE CARD Pantone provides an accurate method for selection, specification. Available in Solid uncoated and solid coated. Each colour identify by unique Pantone names and number. We reserve the right to change the Design and specifications without prior notice
COLOUR MATCHING CABINET This Color comparison light Cabinet is suitable to stimulate different lighting condition & obtain an objective assessment of colour. Fluorescent artificial day light Incandescent tungsten filament lamp Ultra violet black light lamp TL 84 Cool White Fluorescent Inner Chamber Size Power Supply 28 x 20 x 16 Approx. Single Phase We reserve the right to change the Design and specifications without Prior notice
TUMBLER DRUM It shall consist of a Circular Drum of 1000mm inside dia and 500mm inside length and shall be Constructed of Mild Steel plate at Least 5mm thickness. The Drum shalll be replaced whenever the thickness of the plate is produced by angle lifter 50 x 50 x 5mm shall be solidly attached longitudinally over the entire length of the inner side of the Drum by riveting in such manner as to prevent a accumulation of material between the lifter and the drum. The light of the drum axis shall not be more than 700mmm from the floor. Motor 1.75 hp Gear Motor Drum RPM 25 or 26 rpm Motor RPM 1440 rpm Power Supply 3 Phase We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo..com
ROTAP SIEVE SHAKER The Gyratory Sieve Shaker is Durable Constructed suitable for 6 No. of 12 Dia & 18 Dia Sieves with Lid and Receiver. Running parts operate under Oil, Machine is easily installed reproduced the circular and the tapping motion with a mechanical action. NOTE: 1. Different Size of Test Sieves also available AT AN Extra Cost. 2. Timer also available At an Extra Cost To Work on 220 / 230 volt A.C Supply Electric Motor Power Supply RPM 0.75 hp Single Phase 1440 rpm. We reserve the right to change the Design and specifications without Prior notice
CRUCIBLES PLATINUM CRUCIBLE & LID NICKEL CRUCIBLE & LID VOLATILE MATTER CRUCIBLE & LID SILICA CRUCIBLE & LID PARTICULAR Platinum Crucible Nickel Crucible V M Crucible Silica Crucible CAPACITY 10ml, 25ml, 50ml 25ml, 50ml, 100ml 15ml 25ml, 50ml, 80ml We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo. com
LAB SOLVENTS & GLASSWARES We reserve the right to change the Design and specifications without Prior notice Email: kishorelab@gmail.com, kishorinter@yahoo. com