Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals (Nitrile only). Optional Non-Synchronous Motion Optional Proximity Sensors Reads position of jaw (Sold separately) Preloaded Bearings Preloaded roller bearings provide maximum support and precise motion. Operation Operating Characteristic... Double acting, rack and pinion Gripping Force @ PSI... 23-498 lbs Stroke Range....5 to 3 inches Operating Pressure Range... 5 - PSI (.3-7 bar) Mounting Grippers can be mounted and operated in any orientation. Body mounts with screws and locates with slip fit dowel pins for accuracy. Not Recommended for Applications Containing: Dirt or grit Machining chips Environments with loose particulate Mechanism lubricant that could cause contamination Contents P5G-HP-5P...86 P5G-HP-P...87 P5G-HP-25P...88 P5G-HP-35P...89 P5G-HP-4P...9 P5G-HP-43P...9 Metric Design Option...92 Fluorocarbon Seals...92 Sensors...92 Ordering Information...93 Fingers attach to jaws with screws and locate by keying or slip fit dowel pins. WARNING! Protect drive and bearing mechanism from falling debris when mounted upside down. 85 Parker Hannifin Corporation
Catalog 9-2/US P5G-HP-5PM-V Total Grip Force ( psi @ in) 23 lbs 2 N Stroke.5 in 2.7 mm Weight.3 lbs.4 kg Bore Size.625 in 5.9 mm Cylinder Volume. in 3.64 cm 3 Repeatability ±.5 in ±. mm Temperature Range* -3 to 8 F -35 to 8 C Pressure Range 5- psi.3-7 bar 4 micron (dry air) GRIP FORCE - 53 2 45 36 27 8 9 8 6 4 2 8 PSI [5.5 bar] 6 PSI [4. bar] 4 PSI [2.7 bar] 2 PSI [.4 bar] PSI [7 bar] 2 3 25 5 75 4 in. 2 mm Maximum oading Capacity oad Static Dynamic Axial Forces (C,T) 5 lbs 222 N 5 lbs 67 N Moment (Mx) 5 in-lbs 6 Nm 2 in-lbs Nm Moment (My) 6 in-lbs 7 Nm 5 in-lbs 2 Nm Moment (Mz) 5 in-lbs 6 Nm 2 in-lbs Nm 2.66 [52.5].5 [38.].5625 [4.29] 2X #-32 [M5].22 [6].59 [5] COSE.25 [28.58].25 [3.8].3 [8].84 [46.7] 2X #6-32 X.38 DP [M4 X 9 DP] 2X.25 SF X.3 DP [ 5 H7 X 7 DP]. [25.4] 2X #4-4 X.9 DP (DO NOT EXCEED DEPTH).4 [3].73 [9].23 [3]. [2].224 ±. [5.69 ±.3].5 [2.7].25 [3.2].875 [22.2] JAW MOUNTING PATTERN (SHOWN IN OPEN POSITION).25 [6.4].25 [6.4].5 [].54 [4] 4X #5-4 X.8 DP 4X.625 SF X.3 DP [ 2 H7 X 3 DP].67 [7] STANDARD (REMOVABE) 2X #5-4 X.8 DP.75 [44] COSE 2.25 [57] OPEN 86 Parker Hannifin Corporation
Catalog 9-2/US P5G-HP-PM-V Total Grip Force ( psi @ in) 34 lbs 5 N Stroke. in 25.4 mm Weight.5 lbs.23 kg Bore Size.75 in 9. mm Cylinder Volume.22 in 3 3.6 cm 3 Repeatability ±.5 in ±. mm Temperature Range* -3 to 8 F -35 to 8 C Pressure Range 5- psi.3-7 bar 4 micron (dry air) GRIP FORCE - 8 8 7 6 62 4 53 2 45 36 8 27 6 8 4 9 2 8 PSI [5.5 bar] 6 PSI [4. bar] 4 PSI [2.7 bar] 2 PSI [.4 bar] PSI [7 bar] 2 3 25 5 75 4 in. 2 mm Maximum oading Capacity oad Static Dynamic Axial Forces (C,T) 6 lbs 267 N 2 lbs 89 N Moment (Mx) in-lbs Nm 25 in-lbs 3 Nm Moment (My) 2 in-lbs 4 Nm 3 in-lbs 3 Nm Moment (Mz) in-lbs Nm 25 in-lbs 3 Nm 2.8 [7.4].5 [38.].5625 [4.29].25 [28.58].25 [3.8] 2X #6-32 X.38 DP [M4 X 9 DP] 2X.25 SF X.3 DP [ 5 H7 X 7 DP] 2X #-32 [M5]..2 [5].42 [] [25.4] C.6 [4] C.89 [23] COSE.8 [2] 2.34 [59.4].75 [44].5 [2.7].224 ±. [5.67 ±.3].6 [2].25 [3.2].25 [6.4].25 [28.6] JAW MOUNTING PATTERN (SHOWN IN OPEN POSITION).94 [2.4].63 [.6].54 [4] 4X.625 SF X.3 DP [ 2 H7 X 3 DP] 6X #5-4 X.5 DP [M3 X 3 DP].25 [6.4].25 [6.4] STANDARD (REMOVABE).67 [7] 2X #5-4 X.6 DP 3.25 [83] OPEN 2.25 [57] COSED 2X #4-4 X.9 DP 87 Parker Hannifin Corporation
Catalog 9-2/US P5G-HP-25PM-V Total Grip Force ( psi @ in) 72 lbs 32 N Stroke.3 in 28.7 mm Weight. lbs.45 kg Bore Size. in 25.2 mm Cylinder Volume.5 in 3 8.2 cm 3 Repeatability ±.5 in ±. mm Temperature Range* -3 to 8 F -35 to 8 C Pressure Range 5- psi.3-7 bar 4 micron (dry air) GRIP FORCE - 78 4 56 35 33 3 25 89 2 67 5 45 22 5 PSI [7 bar] 8 PSI [5.5 bar] 6 PSI [4. bar] 4 PSI [2.7 bar] 2 PSI [.4 bar] 2 3 25 5 75 4 in. 2 mm Maximum oading Capacity oad Static Dynamic Axial Forces (C,T) lbs 445 N 3 lbs 33 N Moment (Mx) 2 in-lbs 23 Nm 5 in-lbs 6 Nm Moment (My) 25 in-lbs 28 Nm 6 in-lbs 7 Nm Moment (Mz) 2 in-lbs 23 Nm 5 in-lbs 6 Nm 3. [76.2] 2. [5.8].6875 [7.46].5 [38.] 2X /4-2 X.38 DP [M6 X 9 DP] 2X.875 SF X.25 DP [ 5 H7 X 6 DP] 2X #-32 [M5].2 [5].47 [2].25 [3.8].4 [4]. [25].4 [26] COSE 3.92 [8.] STANDARD (REMOVABE) 2.45 [62].438 ±. [.2 ±.3].375 [9.5].2 [5].5 [2.7].32 [7.9].8 [2].562 [39.7] JAW MOUNTING PATTERN (SHOWN IN OPEN POSITION) 2X #-32 X.3 DP [M5 X 7 DP] 2X.25 SF X.25 DP [ 4 H7 X 6 DP] 4X #-32 X.3DP [M5 X 7 DP].82 [2].73 [9].375 [9.5] 4.25 [8] OPEN 3.3 [79] COSED 2X #4-4 X.9 DP 88 Parker Hannifin Corporation
Catalog 9-2/US P5G-HP-35PM-V Total Grip Force ( psi @ in) 74 lbs 774 N Stroke. in 25.4 mm Weight 3.5 lbs.6 kg Bore Size.62 in 4. mm Cylinder Volume.36 in 3 7. cm 3 Repeatability ±.5 in ±. mm Temperature Range* -3 to 8 F -35 to 8 C Pressure Range 5- psi.3-7 bar 4 micron (dry air) GRIP FORCE - 4 9 356 8 32 7 267 6 223 5 78 4 32 3 89 2 45 PSI [7 bar] 25 8 PSI [5.5 bar] 6 PSI [4. bar] 4 PSI [2.7 bar] 2 PSI [.4 bar] 2 3 5 76 4 2 5 in. 27mm Maximum oading Capacity oad Static Dynamic Axial Forces (C,T) 2 lbs 89 N 75 lbs 334 N Moment (Mx) 5 in-lbs 57 Nm 25 in-lbs 4 Nm Moment (My) 6 in-lbs 68 Nm 5 in-lbs 7 Nm Moment (Mz) 5 in-lbs 57 Nm 25 in-lbs 4 Nm.5 [38.] 4.375 [.] 2.75 [69.9] 4X /4-2 X.5 DP [M6 X 2 DP].875 [22.2] 2.25 [57.5] 2X.875 SF X.375 DP [ 5 H7 X 9 DP] 2X #4-4 X.25 DP [M3 X 6 DP] (DO NOT EXCEED DEPTH).3 [8].96 [24].88 [48] 2X /8 NPT [G/8 ] COSE 2. [5.8].38 [].3 [29].37 [] 4.63 [3.2] STANDARD (REMOVABE).25 [28.57].75 ±. [9.5 ±.3].376 [9.6].24 [6] 4.62 [7] COSED 5.62 [43] OPEN.5 [2.7].562 [4.3] 8X.25 SF X.25 DP [ 4 H7 X 6 DP] 6X /4-2 X.38 DP [M6 X 9 DP].562 [4.3] 2.25 [57.2] JAW MOUNTING PATTERN (SHOWN IN OPEN POSITION).625 [5.9].87 [4.7].25 [32] 4X /4-2 X.375 DP [M6 X 9 DP] 89 Parker Hannifin Corporation
Catalog 9-2/US P5G-HP-4PM-V Total Grip Force ( psi @ in) 2 lbs 89 N Stroke 2. in 5.8 mm Weight 6. lbs 2.7 kg Bore Size.75 in 44.4 mm Cylinder Volume.7 in 3 28. cm 3 Repeatability ±. in ±.3 mm Temperature Range* -3 to 8 F -35 to 8 C Pressure Range 5- psi.3-7 bar 4 micron (dry air) GRIP FORCE - 445 356 267 78 89 8 6 4 2 25 PSI [7 bar] 8 PSI [5.5 bar] 6 PSI [4. bar] 4 PSI [2.7 bar] 2 PSI [.4 bar] 2 3 4 5 6 5 77 2 27 53 7 78 8 in. 23mm Maximum oading Capacity oad Static Dynamic Axial Forces (C,T) 4 lbs 79 N 5 lbs 667 N Moment (Mx) in-lbs 3 Nm 25 in-lbs 28 Nm Moment (My) 2 in-lbs 36 Nm 3 in-lbs 34 Nm Moment (Mz) in-lbs 3 Nm 25 in-lbs 28 Nm 5.25 [33.4] 3. [76.2].875 [47.62].25 [28.6] 2.375 [6.3] 2.5 [63.5] 4X 3/8-6 X.5 DP [M X 2 DP] 2X.875 SF X.38 DP [ 5 H7 X 9 DP] 2X #4-4 X.25 DP [M3 X 6 DP]. ±. [25.4 ±.3].44 [].625 [4.28] 5. [27] COSED 7. [78] OPEN.6875 [7.46].375 [9.5].95 [24] 2.38 [6] 4.922.72 [8] [25.].3 [8] 2X /8 NPT [G/8 ] COSE.625 [5.9] 6X 5/6-8 X.5 DP [M8 X 2 DP] MOUNTING SHAFT.25 [6.4] 8X.25 SF X.25 DP [ 4 H7 X 6 DP] 2.25 [57.2].375 [34.9].44 [].5[38] 2X /4 X.5 DP [M6 X 2 DP] 2X 5/6-8 X.5 DP [M8 X 2 DP] 2.5 [63.5].88 [4.8].625 [5.9].625 [5.9] JAW MOUNTING PATTERN (SHOWN IN OPEN POSITION) 9 Parker Hannifin Corporation
Catalog 9-2/US P5G-HP-43PM-V Total Grip Force ( psi @ in) 498 lbs 225 N Stroke 3. in 76.2 mm Weight 6 lbs 7.3 kg Bore Size 2.5 in 63.5 mm Cylinder Volume 7.36 in 3 2.6 cm 3 Repeatability ±. in ±.3 mm Temperature Range* -3 to 8 F -35 to 8 C Pressure Range 5- psi.3-7 bar 4 micron (dry air) GRIP FORCE - 3 25 89 2 668 5 445 223 5 3 77 8 PSI [5.5 bar] 6 PSI [4. bar] 4 PSI [2.7 bar] 2 PSI [.4 bar] 6 9 53 229 PSI [7 bar] 2 35 5 in. 38mm Maximum oading Capacity oad Static Dynamic Axial Forces (C,T) lbs 4448 N 35 lbs 557 N Moment (Mx) 25 in-lbs 283 Nm 5 in-lbs 57 Nm Moment (My) 3 in-lbs 339 Nm 6 in-lbs 68 Nm Moment (Mz) 25 in-lbs 283 Nm 5 in-lbs 57 Nm 8. [23.2] 4.5 [4.3] 2X.325 SF X.5 DP [ 8 H7 X 2 DP] 2. [5.8] 4X /2-3 X. DP [M2 X 25 DP] 3.75 [95.3] 2.625 [66.68] 2X #4-4 X.38 DP [M3 X 9 DP].3 [29].95 [24] 3.68 [93] 2X /8 NPT [G/8 ] 2.94 [74.7].48 [2].63 [6] COSE 2.3 [54].5 ±. [38. ±.3].5 [292] OPEN 8.5 [26] COSED JAW COVER.875 [47.6].75 [9.].75 [9.] JAW MOUNTING PATTERN (SHOWN IN OPEN POSITION) 4.25 [7.9].27 [7] SHAFT EXTENSION FOR SENSOR MNTG KIT.75 [9.] 8X.875 SF X.38 DP [ 5 H7 X 9 DP] 6X 7/6-2 X. DP [M2 X 25 DP]. [25.4].5 [38.] 6.89 [75.] 2X 3/8-6 X.5 DP [M X 2 DP].72 [44] 9 Parker Hannifin Corporation
Catalog 9-2/US Metric Option (M) The standard unit is manufactured with imperial mounting and porting. With this option specified, the gripper incorporates metric threads and ports. Reference the dimensional drawings for each size gripper for more details. Fluorocarbon Seals (V) Standard nitrile seals should be used for general purpose applications with temperatures of 3 to 8 F (-35 to 8 C). Fluorocarbon seals are recommended for high temperature applications up to 25 F (2 C). Seal Type Temperature Range Standard Buna-N -3 to 8 F (-35 to 8 C) Fluorocarbon -2 to 25 F (-3 to 2 C) Proximity Sensor Proximity sensors provide feedback on the position of the gripper fingers by sensing the metal target. The P5G-HP-P series grippers come standard with the target assembled. The target can be removed in applications where it is not needed. Proximity sensors, cables and mounting kits must be ordered separately. See Sensor section for part numbers and sensor specifications. HP-5P, HP-P, HP-25P A INDUCTIVE SENSORS AND MOUNTING KIT.24 [6] BRACKET ADJUSTABIIT Dimensions A Model inch (mm) HP-5P.79 (2) HP-P.79 (2) HP-25P.96 (24) HP-35P.4 (36) HP-4P.54 (39) HP-43P.88 (48) A HP-35P, HP4P, HP-43P INDUCTIVE SENSORS AND MOUNTING KIT.24 [6] BRACKET ADJUSTABIIT 92 Parker Hannifin Corporation
Catalog 9-2/US Model Code and Ordering Information P5G HP 5 P M V Pneumatic Gripper P5G Series HP Size 5 5/8 inch Bore,.5 inch Stroke 3/4 inch Bore,. inch Stroke 25. inch Bore,.3 inch Stroke 35.62 inch Bore,. inch Stroke 4.75 inch Bore, 2. inch Stroke 43 2.5 inch Bore, 3. inch Stroke P Design Omit Imperial Design (Standard) M Metric Design Seals Omit - Nitrile Seals (Standard) V Fluorocarbon Seals Seal Kits Size Nitrile Seal Kit Fluorocarbon Seal Kit P5G-HP-5P PSK-P5G-HP-5P PSK-P5G-HP-5PV P5G-HP-P PSK-P5G-HP-P PSK-P5G-HP-PV P5G-HP-25P PSK-P5G-HP-25P PSK-P5G-HP-25PV P5G-HP-35P PSK-P5G-HP-35P PSK-P5G-HP-35PV P5G-HP-4P PSK-P5G-HP-4P PSK-P5G-HP-4PV P5G-HP-43P PSK-P5G-HP-43P PSK-P5G-HP-43PV 93 Parker Hannifin Corporation